linuxcncAllWasm/debian/configure

#!/bin/bash
# dpkg configuration script for linuxcnc
# Copyright (C) 2006      Jeff Epler
#               2025-2026 Steffen Moeller
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# When used to produce a debian package, this file is a script "used to
# control compilation and installation of the executable"

set -e

if [[ -z "$OSTYPE" ]]; then
    echo "E: The 'OSTYPE' environment variable is not set."
    echo "   Failure to confirm Linux as the operating system cannot be determined."
    exit 1
else
    echo "D: Found operating system '$OSTYPE'."
    if [[ ! "$OSTYPE" == "linux-gnu"* ]]; then
        echo "W: LinuxCNC is not (yet) prepared for the operating system '$OSTYPE'."
        if [[ "$OSTYPE" == "freebsd"* ]]; then
            echo "   For FreeBSD there have been reports for LinuxCNC to compile and be executable."
        else
            if [[ "$OSTYPE" == "darwin"* ]]; then
                echo
                echo "   LinuxCNC is yet unlikely to be successfully built on MacOS because of missing dependencies."
                if command -v brew &> /dev/null; then
                    echo "   With brew, we are aware of packages"
                    echo "     autoconf automake libusb libmodbus libtircp pkgconf"
                    echo "   but missing is, e.g., a package for libgpiod."
                fi
            fi
        fi
        echo "   Instead of this Debian+derivative-tailored configuration please invoke the compilation directly."
        exit 1
    fi
fi

usage () {
    P=${0##*/}
    cat 1>&2 <<EOF
$P: Set up debian/ files to build for a particular kernel

Usage:
  $P [no-docs]

  Extra options:

    no-docs|nodocs|nodoc|no-doc
        Skip building documentation.
        Debian packaging will not know about documentation to exist at all.
        If configured regularly but with the intent not to build the docs,
        run "DEB_BUILD_OPTIONS=nodocs dpkg-buildpackage".

    sim|uspace|noauto
        Accepted for compatibility, but now ignored.

    -h|--help|help
        Show this help.
EOF
}

cd "${0%/*}"

if [ "$1" == "-h" ] || [ "$1" == "-help" ] || [ "$1" == "--help" ]; then
    usage
    exit 0
fi

EXTRA_BUILD=
LIBREADLINE_DEV="libeditreadline-dev"

ENABLE_BUILD_DOCUMENTATION=--enable-build-documentation=pdf

# Specialize these based on DISTRIB_NAME as needed
# These do not run-time depend on a specific package because
# the whole point is to allow a range of kernels to work, and we don't know
# of any common thing that all such kernels would provide.

while test $# -ne 0; do
    case "$1" in
    sim|uspace|noauto) echo "I: Argument $1 is accepted for compatibility, but ignored";;
    help|-h|--help) usage; exit 0 ;;
    no-docs|nodocs|nodoc|no-doc) unset ENABLE_BUILD_DOCUMENTATION ;;
    *)  echo 1>&2 "Unknown option: $1"
        echo 1>&2
        usage
        exit 99 ;;
    esac
    shift
done

DISTRIB_NAME=
if [ "$(command -v lsb_release)" != "" ] || [ "$(which lsb_release)" != "" ]; then
    ID="$(lsb_release --short --id)"
    RELEASE="$(lsb_release --short --release)"
    # Workaround for broken lsb_release, <URL: https://bugs.debian.org/1008735 >
    case "$RELEASE" in
      n/a)
        RELEASE=unstable
        ;;
    esac
    DISTRIB_NAME="$ID-$RELEASE"
elif [ -f /etc/lsb-release ]; then
    source /etc/lsb-release
    DISTRIB_NAME=$DISTRIB_ID-$DISTRIB_RELEASE
fi

if [ -n "$ENABLE_BUILD_DOCUMENTATION" ]; then
    DOC_DEPENDS="asciidoctor-pdf | ruby-asciidoctor-pdf,\n    fonts-dejavu,\n    fonts-noto-cjk,\n    ghostscript,\n    graphviz,\n    librsvg2-bin,\n    python3-fonttools,\n    ruby-rouge,\n    w3c-linkchecker"
else
    DOC_DEPENDS=''
fi

MODUTILS_DEPENDS=kmod
PYTHON_PACKAGING_DEPENDS=dh-python
PYTHON_GST=python3-gst-1.0,gstreamer1.0-plugins-base
TCLTK_VERSION=8.6
PYTHON_IMAGING=python3-pil
PYTHON_IMAGING_TK=python3-pil.imagetk
QTVCP_DEPENDS="python3-qtpy,\n    python3-pyqt5,\n    python3-pyqt5.qsci,\n    python3-pyqt5.qtsvg,\n    python3-pyqt5.qtopengl,\n    python3-opencv,\n    python3-dbus,\n    python3-espeak,\n    python3-dbus.mainloop.pyqt5,\n    python3-pyqt5.qtwebengine,\n    espeak-ng,\n    pyqt5-dev-tools,\n    gstreamer1.0-tools,\n    espeak,\n    sound-theme-freedesktop"
YAPPS_RUNTIME="python3-yapps"
DEBHELPER="debhelper (>= 12)"
COMPAT="12"

case $DISTRIB_NAME in
    Ubuntu-25.*|Ubuntu-24.*|Ubuntu-21.*|Debian-11|Debian-11.*|Debian-12|Debian-12.*|Debian-13|Debian-13.*|Debian-testing|Debian-unstable)
        LIBREADLINE_DEV=libeditreadline-dev
        COMPAT=""
        DEBHELPER="debhelper-compat (= 13)"
        ;;
    Ubuntu-20.*)
        ;;
    Debian-10|Debian-10.*|Raspbian-10|Raspbian-10.*)
        ;;
    *)
        echo "W: Unknown distribution: '$DISTRIB_NAME'."
        echo "   Detected dependencies may be incomplete or wrong."
        echo "   Please consider fixing it and submitting a pull request."
        ;;
esac

TARGET=uspace
EXTRA_RECOMMENDS=hostmot2-firmware-all
MODULE_PATH=usr/lib/linuxcnc/modules
MODULE_EXT=.so
KERNEL_DEPENDS=libudev-dev,iptables
KERNEL_DEPENDS_BUILD=libudev-dev
KERNEL_HEADERS=
KERNEL_VERSION=uspace
MODUTILS_DEPENDS=
if false; then
MAIN_PACKAGE_NAME=linuxcnc
OTHER_MAIN_PACKAGE_NAME=linuxcnc-uspace
else
DISTRIB_NAME=uspace-$DISTRIB_NAME
MAIN_PACKAGE_NAME=linuxcnc-uspace
OTHER_MAIN_PACKAGE_NAME=linuxcnc
fi

EXTRA_RECOMMENDS="$EXTRA_RECOMMENDS, linux-image-rt-amd64 [linux-amd64], linux-image-rt-686-pae [linux-i386]"
CONFIGURE_REALTIME_ARG=--with-realtime=uspace

subst () {
sed \
    -e "s#@COMPAT@#$COMPAT#g" \
    -e "s#@DEBHELPER@#$DEBHELPER#g" \
    -e "s#@DISTRIB_NAME@#$DISTRIB_NAME#g" \
    -e "s#@DOC_DEPENDS@#$DOC_DEPENDS#g" \
    -e "s#@EXTRA_BUILD@#$EXTRA_BUILD#g" \
    -e "s#@EXTRA_RECOMMENDS@#$EXTRA_RECOMMENDS#g" \
    -e "s#@KERNEL_DEPENDS@#$KERNEL_DEPENDS#g" \
    -e "s#@KERNEL_DEPENDS_BUILD@#$KERNEL_DEPENDS_BUILD#g" \
    -e "s#@KERNEL_HEADERS@#$KERNEL_HEADERS#g" \
    -e "s#@KERNEL_VERSION@#$KERNEL_VERSION#g" \
    -e "s#@LIBREADLINE_DEV@#$LIBREADLINE_DEV#g" \
    -e "s#@MAIN_PACKAGE_NAME@#$MAIN_PACKAGE_NAME#g" \
    -e "s#@MODULE_EXT@#$MODULE_EXT#g" \
    -e "s#@MODULE_PATH@#$MODULE_PATH#g" \
    -e "s#@MODUTILS_DEPENDS@#$MODUTILS_DEPENDS#g" \
    -e "s#@OTHER_MAIN_PACKAGE_NAME@#$OTHER_MAIN_PACKAGE_NAME#g" \
    -e "s#@PYTHON_GST@#$PYTHON_GST#g" \
    -e "s#@PYTHON_IMAGING@#$PYTHON_IMAGING#g" \
    -e "s#@PYTHON_IMAGING_TK@#$PYTHON_IMAGING_TK#g" \
    -e "s#@PYTHON_PACKAGING_DEPENDS@#$PYTHON_PACKAGING_DEPENDS#g" \
    -e "s#@QTVCP_DEPENDS@#$QTVCP_DEPENDS#g" \
    -e "s#@RTAI_ARCHITECTURE@#$RTAI_ARCHITECTURE#g" \
    -e "s#@TARGET@#$TARGET#g" \
    -e "s#@CONFIGURE_REALTIME_ARG@#$CONFIGURE_REALTIME_ARG#g" \
    -e "s#@TCLTK_VERSION@#$TCLTK_VERSION#g" \
    -e "s#@XENOMAI_ARCHITECTURE@#$XENOMAI_ARCHITECTURE#g" \
    -e "s|@YAPPS_RUNTIME@|$YAPPS_RUNTIME|g" \
    -e "s#@ENABLE_BUILD_DOCUMENTATION@#$ENABLE_BUILD_DOCUMENTATION#g" \
    -e '/^\s*,\s*$/d' \
    "$@"
}

if [[ -z "${COMPAT}" ]]; then
    rm -f compat
else
    subst compat.in > compat
fi

subst control.top.in > control

echo >> control
subst control.main-pkg.in >> control

subst linuxcnc.install.in > ${MAIN_PACKAGE_NAME}.install
subst linuxcnc.lintian-overrides.in > ${MAIN_PACKAGE_NAME}.lintian-overrides
subst linuxcnc.manpages.in > ${MAIN_PACKAGE_NAME}.manpages

subst rules.in > rules
chmod +x rules

if [ -n "$ENABLE_BUILD_DOCUMENTATION" ]; then
    subst control.docs.in >> control
fi


rm -f ../build-stamp
echo "I: Successfully configured for '$DISTRIB_NAME'."

echo "I: You can now start the build of LinuxCNC Debian packages."
echo "   To build and test everything: fakeroot debian/rules binary"
echo "   To build the executables and man pages only: fakeroot debian/rules binary-arch"
echo "   To avoid tests: DEB_BUILD_OPTIONS=nocheck debian/rules binary"
if [ -n "$ENABLE_BUILD_DOCUMENTATION" ]; then
    echo "   To avoid documentation: DEB_BUILD_OPTIONS=nodocs fakeroot debian/rules binary"
else
    echo "   Building of documentation is disabled."
fi
echo "   The DEB_BUILD_OPTIONS environment variable also works with dpkg-buildpackage."

if command -v dpkg-checkbuilddeps > /dev/null; then

    a=""
    if [ -n "$ENABLE_BUILD_DOCUMENTATION" ]; then
        a=$(cd .. && dpkg-checkbuilddeps 2>&1 || true)
        if [ -n "$a" ]; then
            echo "W: To successfully build all of LinuxCNC, install the following build dependencies are mising:"
        else
            echo "I: All build dependencies available for complete builds including the documentation."
        fi
    else
        a=$(cd .. && dpkg-checkbuilddeps -B 2>&1 || true)
        if [ -n "$a" ]; then
            echo "W: To successfully build the architecture-dependent parts of LinuxCNC, the following build dependencies are mising:"
        else
            echo "I: No dependencies missing while not building the documentation."
        fi
    fi
    if [ -n "$a" ]; then
        # The common part once missing packages have been identified
        echo -n "    "; echo "$a" | cut -f4 -d:
        echo "   The missing packages are auto-installed by"
        echo "     sudo apt build-dep ."
    fi
else
    echo "W: Tool to check build-dependenices not found"
    echo "   You may want to install it as follows:"
    echo "     sudo apt install dpkg-dev"
    echo "   and directly execute it like this:"
    echo "     dpkg-checkbuilddeps"
    echo "   or just execute"
    echo "     sudo apt build-dep ."
fi

# vim: ts=4