Import LinuxCNC source tree
This commit is contained in:
Wang Dequan
260
configs/by_interface/pico/ppmc/ppmc.ini
Normal file
260
configs/by_interface/pico/ppmc/ppmc.ini
Normal file
@@ -0,0 +1,260 @@
|
||||
# EMC controller parameters for generic controller. Make these what you need
|
||||
# for your system.
|
||||
# General note: Comments can either be preceded with a # or ; - either is
|
||||
# acceptable, although # is in keeping with most linux config files.
|
||||
# General section -------------------------------------------------------------
|
||||
|
||||
[EMC]
|
||||
# Version of this INI file
|
||||
VERSION = 1.1
|
||||
# Name of machine, for use with display, etc.
|
||||
MACHINE = LinuxCNC-PPMC
|
||||
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
||||
DEBUG = 0
|
||||
# DEBUG = 0x00000007
|
||||
# DEBUG = 0x7FFFFFFF
|
||||
# Sections for display options ------------------------------------------------
|
||||
|
||||
[DISPLAY]
|
||||
# Name of display program, e.g., axis
|
||||
DISPLAY = axis
|
||||
# DISPLAY = tklinuxcnc
|
||||
# Cycle time, in seconds, that display will sleep between polls
|
||||
CYCLE_TIME = 0.100
|
||||
# Path to help file
|
||||
HELP_FILE = tklinuxcnc.txt
|
||||
# Initial display setting for position, RELATIVE or MACHINE
|
||||
POSITION_OFFSET = RELATIVE
|
||||
# Initial display setting for position, COMMANDED or ACTUAL
|
||||
POSITION_FEEDBACK = ACTUAL
|
||||
# Highest value that will be allowed for feed override, 1.0 = 100%
|
||||
MAX_FEED_OVERRIDE = 1.2
|
||||
# Prefix to be used
|
||||
PROGRAM_PREFIX = ../../nc_files/
|
||||
# Introductory graphic
|
||||
INTRO_GRAPHIC = linuxcnc.gif
|
||||
INTRO_TIME = 2
|
||||
# Enable popup balloon help
|
||||
BALLOON_HELP = 1
|
||||
# Task controller section -----------------------------------------------------
|
||||
|
||||
[FILTER]
|
||||
#No Content
|
||||
|
||||
[RS274NGC]
|
||||
# File containing interpreter variables
|
||||
PARAMETER_FILE = ppmc.var
|
||||
# Motion control section ------------------------------------------------------
|
||||
|
||||
[EMCMOT]
|
||||
EMCMOT = motmod
|
||||
# Timeout for comm to emcmot, in seconds
|
||||
COMM_TIMEOUT = 1.0
|
||||
# Servo task period, in nanoseconds
|
||||
SERVO_PERIOD = 1000000
|
||||
# Hardware Abstraction Layer section --------------------------------------------------
|
||||
|
||||
[TASK]
|
||||
# Name of task controller program, e.g., milltask
|
||||
TASK = milltask
|
||||
# Cycle time, in seconds, that task controller will sleep between polls
|
||||
CYCLE_TIME = 0.010
|
||||
# Part program interpreter section --------------------------------------------
|
||||
|
||||
[HAL]
|
||||
# The run script first uses halcmd to execute any HALFILE
|
||||
# files, and then to execute any individual HALCMD commands.
|
||||
#
|
||||
# list of hal config files to run through halcmd
|
||||
# files are executed in the order in which they appear
|
||||
HALFILE = ppmc_load.hal
|
||||
HALFILE = ppmc_servo.hal
|
||||
HALFILE = ppmc_motion.hal
|
||||
HALFILE = ppmc_io.hal
|
||||
# list of halcmd commands to execute
|
||||
# commands are executed in the order in which they appear
|
||||
#HALCMD = save neta
|
||||
# Trajectory planner section --------------------------------------------------
|
||||
|
||||
[HALUI]
|
||||
#No Content
|
||||
|
||||
[TRAJ]
|
||||
# COORDINATES = X Y Z R P W
|
||||
COORDINATES = X Y Z A
|
||||
HOME = 0 0 0 0
|
||||
LINEAR_UNITS = inch
|
||||
ANGULAR_UNITS = degree
|
||||
DEFAULT_LINEAR_VELOCITY = 0.15
|
||||
MAX_LINEAR_VELOCITY = 1.20
|
||||
DEFAULT_LINEAR_ACCELERATION = 1.5
|
||||
MAX_LINEAR_ACCELERATION = 1.5
|
||||
# Axes sections ---------------------------------------------------------------
|
||||
# Scaling: The OUTPUT_SCALE should be the speed
|
||||
# in UNITS/second (inches/sec or mm/sec) that would be
|
||||
# reached if the PWM duty cycle was 100%. It depends on
|
||||
# the power supply voltage, motor RPM/Volt factor, and
|
||||
# gearing/screw pitch. For example:
|
||||
#
|
||||
# Power supply voltage 50V
|
||||
# Motor RPM/V 1000RPM/24V
|
||||
# Gearing: 2 motor revs per 1 screw rev
|
||||
# Screw pitch: 0.2" per turn
|
||||
#
|
||||
# Max motor speed = 50V * 1000RPM/24V = 2083 RPM
|
||||
# Max screw speed = 2083RPM * 1(screw)/2(motor) = 1041RPM
|
||||
# Max table speed = 1041RPM * 0.2"/turn = 208 in/min
|
||||
# Max table speed = 208 in/min / 60 seconds = 3.47 inches/sec
|
||||
#
|
||||
# Since max speed is reached at 100% duty cycle, OUTPUT_SCALE
|
||||
# should be 3.47
|
||||
# First axis
|
||||
|
||||
[EMCIO]
|
||||
# tool table file
|
||||
TOOL_TABLE = ppmc.tbl
|
||||
# section for external NML server parameters ----------------------------------
|
||||
|
||||
[KINS]
|
||||
KINEMATICS = trivkins
|
||||
JOINTS = 4
|
||||
|
||||
[AXIS_X]
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
|
||||
[JOINT_0]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.000
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
PID_MAX_VEL = 1.2
|
||||
BACKLASH = 0.000
|
||||
INPUT_SCALE = -128000.0
|
||||
OUTPUT_SCALE = -1.0
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
FERROR = 0.001
|
||||
MIN_FERROR = 0.005
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
DEADBAND = 1e-06
|
||||
P = 800.0
|
||||
I = 25.0
|
||||
D = 20.0
|
||||
BIAS = 0.0
|
||||
FF0 = 0.0
|
||||
FF1 = 1.0
|
||||
FF2 = 0.0
|
||||
# Second axis
|
||||
|
||||
[AXIS_Y]
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
|
||||
[JOINT_1]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.000
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
PID_MAX_VEL = 1.2
|
||||
BACKLASH = 0.000
|
||||
INPUT_SCALE = -128000.0
|
||||
OUTPUT_SCALE = -1.0
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
FERROR = 0.001
|
||||
MIN_FERROR = 0.005
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
DEADBAND = 1e-06
|
||||
P = 800.0
|
||||
I = 25.0
|
||||
D = 10.0
|
||||
BIAS = 0.0
|
||||
FF0 = 0.0
|
||||
FF1 = 1.0
|
||||
FF2 = 0.0
|
||||
# Third axis
|
||||
|
||||
[AXIS_Z]
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
|
||||
[JOINT_2]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.0
|
||||
MAX_VELOCITY = 1.20
|
||||
MAX_ACCELERATION = 1.25
|
||||
PID_MAX_VEL = 1.2
|
||||
BACKLASH = 0.000
|
||||
INPUT_SCALE = 128000.0
|
||||
OUTPUT_SCALE = 1.0
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
FERROR = 0.001
|
||||
MIN_FERROR = 0.005
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
DEADBAND = 8e-05
|
||||
P = 800.0
|
||||
I = 25.0
|
||||
D = 10.0
|
||||
BIAS = 0.0
|
||||
FF0 = 0.0
|
||||
FF1 = 1.0
|
||||
FF2 = 0.0
|
||||
# Fourth axis
|
||||
|
||||
[AXIS_A]
|
||||
MIN_LIMIT = -3600.0
|
||||
MAX_LIMIT = 3600.0
|
||||
MAX_VELOCITY = 65
|
||||
MAX_ACCELERATION = 20.0
|
||||
|
||||
[JOINT_3]
|
||||
TYPE = ANGULAR
|
||||
HOME = 0.0
|
||||
MAX_VELOCITY = 65
|
||||
MAX_ACCELERATION = 20.0
|
||||
PID_MAX_VEL = 66.0
|
||||
BACKLASH = 0.000
|
||||
INPUT_SCALE = 1111.111
|
||||
OUTPUT_SCALE = 5.0
|
||||
MIN_LIMIT = -3600.0
|
||||
MAX_LIMIT = 3600.0
|
||||
FERROR = 1.010
|
||||
MIN_FERROR = 1.001
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
DEADBAND = 0.046
|
||||
P = 150.0
|
||||
I = 100.0
|
||||
D = 0.1
|
||||
BIAS = 0.0
|
||||
FF0 = 0.0
|
||||
FF1 = 1.0
|
||||
FF2 = 1.0
|
||||
# section for main IO controller parameters -----------------------------------
|
||||
|
||||
[EMCSERVER]
|
||||
# Uncomment the following line if you need to run a remote GUI.
|
||||
# EMCSERVER = emcsvr
|
||||
Reference in New Issue
Block a user