261 lines
8.0 KiB
INI
261 lines
8.0 KiB
INI
# EMC controller parameters for generic controller. Make these what you need
|
|
# for your system.
|
|
# General note: Comments can either be preceded with a # or ; - either is
|
|
# acceptable, although # is in keeping with most linux config files.
|
|
# General section -------------------------------------------------------------
|
|
|
|
[EMC]
|
|
# Version of this INI file
|
|
VERSION = 1.1
|
|
# Name of machine, for use with display, etc.
|
|
MACHINE = LinuxCNC-PPMC
|
|
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
|
DEBUG = 0
|
|
# DEBUG = 0x00000007
|
|
# DEBUG = 0x7FFFFFFF
|
|
# Sections for display options ------------------------------------------------
|
|
|
|
[DISPLAY]
|
|
# Name of display program, e.g., axis
|
|
DISPLAY = axis
|
|
# DISPLAY = tklinuxcnc
|
|
# Cycle time, in seconds, that display will sleep between polls
|
|
CYCLE_TIME = 0.100
|
|
# Path to help file
|
|
HELP_FILE = tklinuxcnc.txt
|
|
# Initial display setting for position, RELATIVE or MACHINE
|
|
POSITION_OFFSET = RELATIVE
|
|
# Initial display setting for position, COMMANDED or ACTUAL
|
|
POSITION_FEEDBACK = ACTUAL
|
|
# Highest value that will be allowed for feed override, 1.0 = 100%
|
|
MAX_FEED_OVERRIDE = 1.2
|
|
# Prefix to be used
|
|
PROGRAM_PREFIX = ../../nc_files/
|
|
# Introductory graphic
|
|
INTRO_GRAPHIC = linuxcnc.gif
|
|
INTRO_TIME = 2
|
|
# Enable popup balloon help
|
|
BALLOON_HELP = 1
|
|
# Task controller section -----------------------------------------------------
|
|
|
|
[FILTER]
|
|
#No Content
|
|
|
|
[RS274NGC]
|
|
# File containing interpreter variables
|
|
PARAMETER_FILE = ppmc.var
|
|
# Motion control section ------------------------------------------------------
|
|
|
|
[EMCMOT]
|
|
EMCMOT = motmod
|
|
# Timeout for comm to emcmot, in seconds
|
|
COMM_TIMEOUT = 1.0
|
|
# Servo task period, in nanoseconds
|
|
SERVO_PERIOD = 1000000
|
|
# Hardware Abstraction Layer section --------------------------------------------------
|
|
|
|
[TASK]
|
|
# Name of task controller program, e.g., milltask
|
|
TASK = milltask
|
|
# Cycle time, in seconds, that task controller will sleep between polls
|
|
CYCLE_TIME = 0.010
|
|
# Part program interpreter section --------------------------------------------
|
|
|
|
[HAL]
|
|
# The run script first uses halcmd to execute any HALFILE
|
|
# files, and then to execute any individual HALCMD commands.
|
|
#
|
|
# list of hal config files to run through halcmd
|
|
# files are executed in the order in which they appear
|
|
HALFILE = ppmc_load.hal
|
|
HALFILE = ppmc_servo.hal
|
|
HALFILE = ppmc_motion.hal
|
|
HALFILE = ppmc_io.hal
|
|
# list of halcmd commands to execute
|
|
# commands are executed in the order in which they appear
|
|
#HALCMD = save neta
|
|
# Trajectory planner section --------------------------------------------------
|
|
|
|
[HALUI]
|
|
#No Content
|
|
|
|
[TRAJ]
|
|
# COORDINATES = X Y Z R P W
|
|
COORDINATES = X Y Z A
|
|
HOME = 0 0 0 0
|
|
LINEAR_UNITS = inch
|
|
ANGULAR_UNITS = degree
|
|
DEFAULT_LINEAR_VELOCITY = 0.15
|
|
MAX_LINEAR_VELOCITY = 1.20
|
|
DEFAULT_LINEAR_ACCELERATION = 1.5
|
|
MAX_LINEAR_ACCELERATION = 1.5
|
|
# Axes sections ---------------------------------------------------------------
|
|
# Scaling: The OUTPUT_SCALE should be the speed
|
|
# in UNITS/second (inches/sec or mm/sec) that would be
|
|
# reached if the PWM duty cycle was 100%. It depends on
|
|
# the power supply voltage, motor RPM/Volt factor, and
|
|
# gearing/screw pitch. For example:
|
|
#
|
|
# Power supply voltage 50V
|
|
# Motor RPM/V 1000RPM/24V
|
|
# Gearing: 2 motor revs per 1 screw rev
|
|
# Screw pitch: 0.2" per turn
|
|
#
|
|
# Max motor speed = 50V * 1000RPM/24V = 2083 RPM
|
|
# Max screw speed = 2083RPM * 1(screw)/2(motor) = 1041RPM
|
|
# Max table speed = 1041RPM * 0.2"/turn = 208 in/min
|
|
# Max table speed = 208 in/min / 60 seconds = 3.47 inches/sec
|
|
#
|
|
# Since max speed is reached at 100% duty cycle, OUTPUT_SCALE
|
|
# should be 3.47
|
|
# First axis
|
|
|
|
[EMCIO]
|
|
# tool table file
|
|
TOOL_TABLE = ppmc.tbl
|
|
# section for external NML server parameters ----------------------------------
|
|
|
|
[KINS]
|
|
KINEMATICS = trivkins
|
|
JOINTS = 4
|
|
|
|
[AXIS_X]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
|
|
[JOINT_0]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
PID_MAX_VEL = 1.2
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = -128000.0
|
|
OUTPUT_SCALE = -1.0
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
FERROR = 0.001
|
|
MIN_FERROR = 0.005
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
DEADBAND = 1e-06
|
|
P = 800.0
|
|
I = 25.0
|
|
D = 20.0
|
|
BIAS = 0.0
|
|
FF0 = 0.0
|
|
FF1 = 1.0
|
|
FF2 = 0.0
|
|
# Second axis
|
|
|
|
[AXIS_Y]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
|
|
[JOINT_1]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
PID_MAX_VEL = 1.2
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = -128000.0
|
|
OUTPUT_SCALE = -1.0
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
FERROR = 0.001
|
|
MIN_FERROR = 0.005
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
DEADBAND = 1e-06
|
|
P = 800.0
|
|
I = 25.0
|
|
D = 10.0
|
|
BIAS = 0.0
|
|
FF0 = 0.0
|
|
FF1 = 1.0
|
|
FF2 = 0.0
|
|
# Third axis
|
|
|
|
[AXIS_Z]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
|
|
[JOINT_2]
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 1.20
|
|
MAX_ACCELERATION = 1.25
|
|
PID_MAX_VEL = 1.2
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = 128000.0
|
|
OUTPUT_SCALE = 1.0
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
FERROR = 0.001
|
|
MIN_FERROR = 0.005
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
DEADBAND = 8e-05
|
|
P = 800.0
|
|
I = 25.0
|
|
D = 10.0
|
|
BIAS = 0.0
|
|
FF0 = 0.0
|
|
FF1 = 1.0
|
|
FF2 = 0.0
|
|
# Fourth axis
|
|
|
|
[AXIS_A]
|
|
MIN_LIMIT = -3600.0
|
|
MAX_LIMIT = 3600.0
|
|
MAX_VELOCITY = 65
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_3]
|
|
TYPE = ANGULAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 65
|
|
MAX_ACCELERATION = 20.0
|
|
PID_MAX_VEL = 66.0
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = 1111.111
|
|
OUTPUT_SCALE = 5.0
|
|
MIN_LIMIT = -3600.0
|
|
MAX_LIMIT = 3600.0
|
|
FERROR = 1.010
|
|
MIN_FERROR = 1.001
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
DEADBAND = 0.046
|
|
P = 150.0
|
|
I = 100.0
|
|
D = 0.1
|
|
BIAS = 0.0
|
|
FF0 = 0.0
|
|
FF1 = 1.0
|
|
FF2 = 1.0
|
|
# section for main IO controller parameters -----------------------------------
|
|
|
|
[EMCSERVER]
|
|
# Uncomment the following line if you need to run a remote GUI.
|
|
# EMCSERVER = emcsvr
|