38189 lines
3.8 MiB
38189 lines
3.8 MiB
{
|
|
"duplicate_edges": [
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/canterp.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/canterp.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/canterp.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 5,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 5,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 6,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 6,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 5,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 7,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 7,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 6,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 8,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 8,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 7,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin|93",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:93:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin ~dup2"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 9,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/lathe.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 9,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/lathe.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 8,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/lathe.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 10,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 10,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 9,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 11,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 11,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 10,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin >/dev/null|52",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:52:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin >/dev/null ~dup2"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 12,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 12,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 11,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 12,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 13,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 13,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 13,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 14,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 14,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/random_tc.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 14,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/random_tc.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 15,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/random_tc.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml|1",
|
|
"occurrence": 15,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/rdelta.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal|resource:hal:loadusr|src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp|22",
|
|
"occurrence": 15,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/rdelta.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal|resource:hal:source|src:file:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal|27",
|
|
"occurrence": 16,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/axis/rdelta.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 5,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 6,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 7,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 8,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 9,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 10,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 11,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 12,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 13,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 14,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 15,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 16,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 17,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 18,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal|6",
|
|
"occurrence": 19,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal|10",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal|10",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.hal|resource:hal:source|src:file:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal|10",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"occurrence": 4,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"occurrence": 5,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"occurrence": 6,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:HAL:POSTGUI_HALFILE|src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal|60",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:60:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal~dup2"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|54",
|
|
"occurrence": 2,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:54:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"key": "src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|54",
|
|
"occurrence": 3,
|
|
"source_id": "src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:54:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/remap_lib"
|
|
}
|
|
],
|
|
"edge_kinds": {
|
|
"declares": 15898,
|
|
"documents": 2827,
|
|
"resource:directory_member": 14101,
|
|
"resource:hal:loadusr": 37,
|
|
"resource:hal:source": 39,
|
|
"resource:ini:APPLICATIONS:APP": 57,
|
|
"resource:ini:DISPLAY:DISPLAY": 2,
|
|
"resource:ini:DISPLAY:EMBED_TAB_COMMAND": 60,
|
|
"resource:ini:DISPLAY:INTRO_GRAPHIC": 188,
|
|
"resource:ini:DISPLAY:LOG_FILE": 33,
|
|
"resource:ini:DISPLAY:MDI_HISTORY_FILE": 43,
|
|
"resource:ini:DISPLAY:PREFERENCE_FILE_PATH": 49,
|
|
"resource:ini:DISPLAY:PROGRAM_PREFIX": 191,
|
|
"resource:ini:EMCIO:TOOL_TABLE": 186,
|
|
"resource:ini:HAL:HALCMD": 1,
|
|
"resource:ini:HAL:HALFILE": 461,
|
|
"resource:ini:HAL:POSTGUI_HALFILE": 123,
|
|
"resource:ini:RS274NGC:PARAMETER_FILE": 201,
|
|
"resource:ini:RS274NGC:SUBROUTINE_PATH": 205,
|
|
"resource:ini:TOOL:TOOL_TABLE": 1,
|
|
"resource:ini:TRAJ:POSITION_FILE": 91,
|
|
"resource:ini:filter_command": 24,
|
|
"test_config_ref": 295,
|
|
"test_entrypoint": 321,
|
|
"test_expected": 247,
|
|
"test_input": 1479
|
|
},
|
|
"edges": 37160,
|
|
"nodes": 51869,
|
|
"normalized_input_sha256": "ae800441cafb54bd7fbba872bf3b4af361041a14b9dee20fdc210204a433aff8",
|
|
"orphan_nodes": [
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#1",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#10-gui-vcp",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#11-1",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#11-api",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#12-opfs",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#13",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#13-1-golden",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#13-2",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#13-3",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#14",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#15",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#2",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#2-1",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#3",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#4-1",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#4-2-g-code",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#4-3-m-code",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#4-4-remap-python",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#4-g-code-o-code-m-code",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#5",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#6",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#7-1-hal",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#7-2-manifest",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#7-3",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#7-hal-i-o",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#8-classicladder-modbus-plc",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#9-io",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#a",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#b",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#c-hal-plc-io",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#d-web-ui",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#e",
|
|
"src:doc:docs/linuxcnc-web-wasm-simulation-coverage.md#linuxcnc-web-wasm",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#1",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#2",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#3-hal-plc",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#4-python-ui",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#5",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#5-1",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#6",
|
|
"src:doc:docs/linuxcnc-web-wasm-source-map.md#linuxcnc-web-wasm",
|
|
"src:file:linuxcnc/configs/sim/README",
|
|
"src:file:linuxcnc/configs/sim/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/axis/README",
|
|
"src:file:linuxcnc/configs/sim/axis/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/canterp_example.can",
|
|
"src:file:linuxcnc/configs/sim/axis/classicladder/README",
|
|
"src:file:linuxcnc/configs/sim/axis/classicladder/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/README",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/corexy.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/corexy_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/db_demo/README",
|
|
"src:file:linuxcnc/configs/sim/axis/db_demo/base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/db_demo/db_nonran.py",
|
|
"src:file:linuxcnc/configs/sim/axis/db_demo/db_ran.py",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/M111",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/README",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.halscope",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/jwp_z.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/jwp_z_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/opa.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/external_offsets/opa_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/M144",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/README",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/extrajoints/extrajoints.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/gantry/README",
|
|
"src:file:linuxcnc/configs/sim/axis/gantry/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.halscope",
|
|
"src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/geometry/M110",
|
|
"src:file:linuxcnc/configs/sim/axis/geometry/README",
|
|
"src:file:linuxcnc/configs/sim/axis/geometry/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/README",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/hitcounter.py",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/manual-example.hal",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/manual-example.ui",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/probe.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/probe_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/gladevcp/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/halui_pyvcp/README",
|
|
"src:file:linuxcnc/configs/sim/axis/halui_pyvcp/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/histogram_demo.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/histogram_demo_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_hal_demo.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_hal_demo_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/README",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/axis_x.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/axis_y.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/axis_z.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/display.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/emc.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/emcio.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/emcmot.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/filter.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/hal.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/joint_0.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/joint_1.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/joint_2.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/kins.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/rs274ngc.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/task.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ini_with_includes/traj.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/iocontrolv2/README",
|
|
"src:file:linuxcnc/configs/sim/axis/iocontrolv2/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/iocontrolv2/nstools.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm_test.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/README",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/README",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xz/README",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xz/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/ja_tests/xz/xzbase.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe-fanucy/README",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe-fanucy/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe.xml",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe_multispindle/README",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe_multispindle/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/lathe_postgui.hal",
|
|
"src:file:linuxcnc/configs/sim/axis/ldelta_demo.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ldelta_demo_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external_es.tx",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/README",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff.halscope",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_display.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/moveoff_settings.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/moveoff/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/README",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/gremlin_view.ui",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/lathe.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_popupkeyboard.ui",
|
|
"src:file:linuxcnc/configs/sim/axis/ngcgui/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/README",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/no-iotask.nml",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/tooltable.sql",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/tooltable.sqlite",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/no-iotask.nml",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/py.ini.notworking",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/pyiocontrol.ini.notworking",
|
|
"src:file:linuxcnc/configs/sim/axis/orphans/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/panelui-demo/README",
|
|
"src:file:linuxcnc/configs/sim/axis/panelui-demo/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/pentapod/README",
|
|
"src:file:linuxcnc/configs/sim/axis/pentapod/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/README",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/customizing.html",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/imperial_material.cfg",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/metric_material.cfg",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/M190",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/keyboard.onboard",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/keyboard.svg",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/numpad.onboard",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/numpad.svg",
|
|
"src:file:linuxcnc/configs/sim/axis/plasma/plasmac2/versions.html",
|
|
"src:file:linuxcnc/configs/sim/axis/qtvcp/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/axis/qtvcp/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/cycle/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/cycle/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/getting-started/tool.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/tool.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/README",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/tool.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/rose_engine/README",
|
|
"src:file:linuxcnc/configs/sim/axis/rose_engine/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/simpockets.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/README",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/twopass_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/twopass_basic.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/twopass_basic_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/twopass_compat.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/simtcl/twopass_compat_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/spindle_orient/README",
|
|
"src:file:linuxcnc/configs/sim/axis/spindle_orient/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/spindle_orient/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/twopass/README",
|
|
"src:file:linuxcnc/configs/sim/axis/twopass/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/twopass/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/twopass/twopass.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/max5/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/max5/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var.bak",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmcgui",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexagui.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/millturn/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/millturn/mcodes/M128",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/millturn/mcodes/M129",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/mcodes/M128",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/mcodes/M129",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/mcodes/M130",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.halshow",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/scara/README",
|
|
"src:file:linuxcnc/configs/sim/axis/vismach/scara/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/wrapped_rotary/README",
|
|
"src:file:linuxcnc/configs/sim/axis/wrapped_rotary/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/README",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/README_es",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/inch_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/inch_trivkins.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/layout1.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/layout2.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/mm_base.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/mm_trivkins.inc",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_es.txt",
|
|
"src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.txt",
|
|
"src:file:linuxcnc/configs/sim/craftsman/README",
|
|
"src:file:linuxcnc/configs/sim/craftsman/craftsman_toolchange",
|
|
"src:file:linuxcnc/configs/sim/craftsman/craftsmancnc",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M100",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M101",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M102",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M103",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M105",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M106",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M107",
|
|
"src:file:linuxcnc/configs/sim/craftsman/macros/M108",
|
|
"src:file:linuxcnc/configs/sim/craftsman/messages",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/gcodes.htm",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/gcodes_files/asciidoc-xhtml11.js",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/gcodes_files/linuxcnc.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/gcodes_files/xhtml11-quirks.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/gcodes_files/xhtml11.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/mcodes.htm",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/mcodes_files/asciidoc-xhtml11.js",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/mcodes_files/linuxcnc.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/mcodes_files/xhtml11-quirks.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/screens/mcodes_files/xhtml11.css",
|
|
"src:file:linuxcnc/configs/sim/craftsman/vfd_spindle",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/README_es",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.txt",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.txt",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/README_es",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torch.svg",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.txt",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.txt",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/LatheMacro.svg",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/savestate.sav",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/macros/macro_Instructions.txt",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/README_es",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/README_es",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/README",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/README_es",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/torch.svg",
|
|
"src:file:linuxcnc/configs/sim/gmoccapy/tool_sensor.para",
|
|
"src:file:linuxcnc/configs/sim/gs2.hal",
|
|
"src:file:linuxcnc/configs/sim/gscreen/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/README_es",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/README_es",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/base.xcf",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/base2.xcf",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/base3.xcf",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/gtkrc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_theme/gtk-3.0/gtk.css",
|
|
"src:file:linuxcnc/configs/sim/gscreen/gscreen_theme/gtk-3.0/gtkrc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/README_es",
|
|
"src:file:linuxcnc/configs/sim/gscreen/lathe.tbl",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/README_es",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/gremlin_view.ui",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui.ui",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.txt",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_es.txt",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.txt",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard_es.txt",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_popupkeyboard.ui",
|
|
"src:file:linuxcnc/configs/sim/gscreen/ngcgui/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/README_es",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/gtkrc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/spin.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/statusbar.rc",
|
|
"src:file:linuxcnc/configs/sim/gscreen/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/gscreen/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/gscreen/spartan/README",
|
|
"src:file:linuxcnc/configs/sim/gscreen/spartan/README_es",
|
|
"src:file:linuxcnc/configs/sim/pyvcp_demo.hal",
|
|
"src:file:linuxcnc/configs/sim/pyvcp_demo.xml",
|
|
"src:file:linuxcnc/configs/sim/pyvcp_demo/README",
|
|
"src:file:linuxcnc/configs/sim/pyvcp_demo/README_es",
|
|
"src:file:linuxcnc/configs/sim/pyvcp_demo/sim_mm.tbl",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/README",
|
|
"src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/probe_points.txt",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/LICENSE",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/M190",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/README",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_imperial_ini.inc",
|
|
"src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_metric_ini.inc",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/.gitignore",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/README",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/README_es",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/README",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/README_es",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/downarrow.xbm",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/leftarrow.xbm",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/rightarrow.xbm",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/uparrow.xbm",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/README",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/qt_auto_probe_tool.ngc",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/stdglue.py",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/LatheMacro.svg",
|
|
"src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/savestate.sav",
|
|
"src:file:linuxcnc/configs/sim/schema-simple.sql",
|
|
"src:file:linuxcnc/configs/sim/test.vcp",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/README",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/README_es",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/screwcompX.dat",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/trivkins/README",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/trivkins/README_es",
|
|
"src:file:linuxcnc/configs/sim/tklinuxcnc/trivkins/xzbase.inc",
|
|
"src:file:linuxcnc/configs/sim/touchy/README",
|
|
"src:file:linuxcnc/configs/sim/touchy/README_es",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/README",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/README_es",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/hitcounter.py",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/manual-example.hal",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/manual-example.ui",
|
|
"src:file:linuxcnc/configs/sim/touchy/gladevcp/simpockets.tbl",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/README",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/README_es",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/gremlin_view.ui",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/lathe.tbl",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_es.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe_es.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff_es.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/ngcgui/sim.tbl",
|
|
"src:file:linuxcnc/configs/sim/touchy/simpockets.tbl",
|
|
"src:file:linuxcnc/configs/sim/touchy/touchy.txt",
|
|
"src:file:linuxcnc/configs/sim/touchy/touchy_es.txt",
|
|
"src:file:linuxcnc/configs/sim/tracking-test.hal",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/README.md",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/about.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/database.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/facing_utility.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/help.css",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/hole_circle_utility.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/ngcgui.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/probing.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/runfromline.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/spindle_pause.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/stylesheets.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/template.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/using_a_mpg.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/using_a_vfd.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/help_files/z_level_comp.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/line-number.txt",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/python/qt_auto_probe_tool.ngc",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/tool_icons/tool_icons.txt",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/asciidoc.css",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/asciidoc.js",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/blank.html",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/blank_data/inject.css",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/linuxcnc.css",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.qrc",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.qss",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_dark.qss",
|
|
"src:file:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_flat.qss",
|
|
"src:file:linuxcnc/docs/.gitignore",
|
|
"src:file:linuxcnc/docs/AUTHORS",
|
|
"src:file:linuxcnc/docs/INSTALL.adoc",
|
|
"src:file:linuxcnc/docs/README.adoc",
|
|
"src:file:linuxcnc/docs/archive/UPDATING",
|
|
"src:file:linuxcnc/docs/help/.gitignore",
|
|
"src:file:linuxcnc/docs/help/asciidoc-markup_es.adoc",
|
|
"src:file:linuxcnc/docs/help/rtfaults.adoc",
|
|
"src:file:linuxcnc/docs/help/rtfaults_es.adoc",
|
|
"src:file:linuxcnc/docs/help/tklinuxcnc.adoc",
|
|
"src:file:linuxcnc/docs/html/.gitignore",
|
|
"src:file:linuxcnc/docs/html/gcode.html",
|
|
"src:file:linuxcnc/docs/html/index.css",
|
|
"src:file:linuxcnc/docs/html/linuxcnc-logo-chips.png",
|
|
"src:file:linuxcnc/docs/html/linuxcnc.css",
|
|
"src:file:linuxcnc/docs/html/minus.png",
|
|
"src:file:linuxcnc/docs/html/plus.png",
|
|
"src:file:linuxcnc/docs/man/.gitignore",
|
|
"src:file:linuxcnc/docs/man/an-old-fixed.tmac",
|
|
"src:file:linuxcnc/docs/man/images/Images_info.adoc",
|
|
"src:file:linuxcnc/docs/man/images/toggle.json",
|
|
"src:file:linuxcnc/docs/man/images/toggle.ps",
|
|
"src:file:linuxcnc/docs/man/images/toggle2nist.json",
|
|
"src:file:linuxcnc/docs/man/images/toggle2nist.ps",
|
|
"src:file:linuxcnc/docs/man/man1/5axisgui.1",
|
|
"src:file:linuxcnc/docs/man/man1/axis-remote.1",
|
|
"src:file:linuxcnc/docs/man/man1/axis.1",
|
|
"src:file:linuxcnc/docs/man/man1/debuglevel.1",
|
|
"src:file:linuxcnc/docs/man/man1/elbpcom.1",
|
|
"src:file:linuxcnc/docs/man/man1/gladevcp.1",
|
|
"src:file:linuxcnc/docs/man/man1/gladevcp_demo.1",
|
|
"src:file:linuxcnc/docs/man/man1/gmoccapy.1",
|
|
"src:file:linuxcnc/docs/man/man1/gremlin_view.1",
|
|
"src:file:linuxcnc/docs/man/man1/gs2_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/gscreen.1",
|
|
"src:file:linuxcnc/docs/man/man1/hal-histogram.1",
|
|
"src:file:linuxcnc/docs/man/man1/hal_input.1",
|
|
"src:file:linuxcnc/docs/man/man1/hal_manualtoolchange.1",
|
|
"src:file:linuxcnc/docs/man/man1/halcmd.1",
|
|
"src:file:linuxcnc/docs/man/man1/halcmd_twopass.1",
|
|
"src:file:linuxcnc/docs/man/man1/halcompile.1",
|
|
"src:file:linuxcnc/docs/man/man1/halmeter.1",
|
|
"src:file:linuxcnc/docs/man/man1/halreport.1",
|
|
"src:file:linuxcnc/docs/man/man1/halrmt.1",
|
|
"src:file:linuxcnc/docs/man/man1/halrun.1",
|
|
"src:file:linuxcnc/docs/man/man1/halsampler.1",
|
|
"src:file:linuxcnc/docs/man/man1/halscope.1",
|
|
"src:file:linuxcnc/docs/man/man1/halshow.1",
|
|
"src:file:linuxcnc/docs/man/man1/halstreamer.1",
|
|
"src:file:linuxcnc/docs/man/man1/haltcl.1",
|
|
"src:file:linuxcnc/docs/man/man1/halui.1",
|
|
"src:file:linuxcnc/docs/man/man1/hbmgui.1",
|
|
"src:file:linuxcnc/docs/man/man1/hexagui.1",
|
|
"src:file:linuxcnc/docs/man/man1/hy_gt_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/hy_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/image-to-gcode.1",
|
|
"src:file:linuxcnc/docs/man/man1/inivar.1",
|
|
"src:file:linuxcnc/docs/man/man1/io.1",
|
|
"src:file:linuxcnc/docs/man/man1/iocontrol.1",
|
|
"src:file:linuxcnc/docs/man/man1/iov2.1",
|
|
"src:file:linuxcnc/docs/man/man1/latency-histogram.1",
|
|
"src:file:linuxcnc/docs/man/man1/latency-plot.1",
|
|
"src:file:linuxcnc/docs/man/man1/latency-test.1",
|
|
"src:file:linuxcnc/docs/man/man1/lineardelta.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnc.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnc_info.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnc_module_helper.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnc_var.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnclcd.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcncmkdesktop.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcncrsh.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcncsvr.1",
|
|
"src:file:linuxcnc/docs/man/man1/linuxcnctop.1",
|
|
"src:file:linuxcnc/docs/man/man1/maho600gui.1",
|
|
"src:file:linuxcnc/docs/man/man1/max5gui.1",
|
|
"src:file:linuxcnc/docs/man/man1/mb2hal.1",
|
|
"src:file:linuxcnc/docs/man/man1/mdi.1",
|
|
"src:file:linuxcnc/docs/man/man1/mdro.1",
|
|
"src:file:linuxcnc/docs/man/man1/milltask.1",
|
|
"src:file:linuxcnc/docs/man/man1/mitsub_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/monitor-xhc-hb04.1",
|
|
"src:file:linuxcnc/docs/man/man1/motion-logger.1",
|
|
"src:file:linuxcnc/docs/man/man1/moveoff_gui.1",
|
|
"src:file:linuxcnc/docs/man/man1/mqtt-publisher.1",
|
|
"src:file:linuxcnc/docs/man/man1/ngcgui.1",
|
|
"src:file:linuxcnc/docs/man/man1/panelui.1",
|
|
"src:file:linuxcnc/docs/man/man1/pi500_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/pmx485-test.1",
|
|
"src:file:linuxcnc/docs/man/man1/pmx485.1",
|
|
"src:file:linuxcnc/docs/man/man1/pncconf.1",
|
|
"src:file:linuxcnc/docs/man/man1/puma560gui.1",
|
|
"src:file:linuxcnc/docs/man/man1/pumagui.1",
|
|
"src:file:linuxcnc/docs/man/man1/pyngcgui.1",
|
|
"src:file:linuxcnc/docs/man/man1/pyui.1",
|
|
"src:file:linuxcnc/docs/man/man1/pyvcp.1",
|
|
"src:file:linuxcnc/docs/man/man1/pyvcp_demo.1",
|
|
"src:file:linuxcnc/docs/man/man1/qtplasmac-cfg2prefs.1",
|
|
"src:file:linuxcnc/docs/man/man1/qtplasmac-materials.1",
|
|
"src:file:linuxcnc/docs/man/man1/qtplasmac-plasmac2qt.1",
|
|
"src:file:linuxcnc/docs/man/man1/qtplasmac-setup.1",
|
|
"src:file:linuxcnc/docs/man/man1/qtvcp.1",
|
|
"src:file:linuxcnc/docs/man/man1/rotarydelta.1",
|
|
"src:file:linuxcnc/docs/man/man1/rs274.1",
|
|
"src:file:linuxcnc/docs/man/man1/rtapi_app.1",
|
|
"src:file:linuxcnc/docs/man/man1/scaragui.1",
|
|
"src:file:linuxcnc/docs/man/man1/schedrmt.1",
|
|
"src:file:linuxcnc/docs/man/man1/scorbot-er-3.1",
|
|
"src:file:linuxcnc/docs/man/man1/sendkeys.1",
|
|
"src:file:linuxcnc/docs/man/man1/shuttle.1",
|
|
"src:file:linuxcnc/docs/man/man1/sim-torch.1",
|
|
"src:file:linuxcnc/docs/man/man1/sim_pin.1",
|
|
"src:file:linuxcnc/docs/man/man1/simulate_probe.1",
|
|
"src:file:linuxcnc/docs/man/man1/stepconf.1",
|
|
"src:file:linuxcnc/docs/man/man1/svd-ps_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/teach-in.1",
|
|
"src:file:linuxcnc/docs/man/man1/thermistor.1",
|
|
"src:file:linuxcnc/docs/man/man1/tooledit.1",
|
|
"src:file:linuxcnc/docs/man/man1/touchy.1",
|
|
"src:file:linuxcnc/docs/man/man1/update_ini.1",
|
|
"src:file:linuxcnc/docs/man/man1/vfdb_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/vfs11_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/wj200_vfd.1",
|
|
"src:file:linuxcnc/docs/man/man1/xhc-hb04-accels.1",
|
|
"src:file:linuxcnc/docs/man/man1/xhc-hb04.1",
|
|
"src:file:linuxcnc/docs/man/man1/xhc-whb04b-6.1",
|
|
"src:file:linuxcnc/docs/man/man1/xyzac-trt-gui.1",
|
|
"src:file:linuxcnc/docs/man/man1/xyzbc-trt-gui.1",
|
|
"src:file:linuxcnc/docs/man/man3/EXPORT_FUNCTION.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/MODULE_AUTHOR.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/MODULE_DESCRIPTION.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/MODULE_LICENSE.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/PM_ROTATION_VECTOR.3",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_ARRAY_INT.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_ARRAY_LONG.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_ARRAY_STRING.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_INT.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_LONG.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/RTAPI_MP_STRING.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/hal_add_funct_to_thread.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_bit_t.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_bool.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_create_thread.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_del_funct_from_thread.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_exit.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_export_funct.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_float_t.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_get_lock.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_init.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_link.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_malloc.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_alias.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_bit_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_bit_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_float_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_float_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_s32_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_s32_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_u32_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_param_u32_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_parport.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_alias.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_bit_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_bit_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_float_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_float_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_port_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_port_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_s32_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_s32_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_u32_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_pin_u32_newf.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_port.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_ready.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_s32_t.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_set_constructor.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_set_lock.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_signal_delete.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_signal_new.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_start_threads.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_stream.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_type_t.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_u32_t.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hal_unlink.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_allocate_bspi_tram.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_bspi_set_read_function.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_bspi_set_write_function.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_bspi_setup_chan.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_bspi_write_chan.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_pktuart.3",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_pktuart_read.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_pktuart_send.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_pktuart_setup.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_tram_add_bspi_frame.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_uart_read.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_uart_send.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/hm2_uart_setup.3hm2",
|
|
"src:file:linuxcnc/docs/man/man3/intro.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/intro.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_app_exit.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_app_main.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_atomic.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_bool.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_byteorder.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_clock_set_period.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_delay.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_delay_max.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_device.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_div_u64.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_div_u64_rem.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_exit.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_firmware.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_get_clocks.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_get_msg_level.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_get_time.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_gfp.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_inb.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_init.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_io.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_is.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_list.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_module_param.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_mutex.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_open_as_root.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_outb.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_parport.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_pci.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_print.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_prio.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_prio_highest.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_prio_lowest.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_prio_next_higher.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_prio_next_lower.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_region.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_release_region.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_request_region.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_set_msg_level.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_shmem.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_shmem_delete.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_shmem_getptr.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_shmem_new.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_slab.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_snprintf.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_stdint.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_string.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_strlcpy.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_delete.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_new.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_pause.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_resume.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_self.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_start.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/rtapi_task_wait.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man3/undocumented.3hal",
|
|
"src:file:linuxcnc/docs/man/man3/undocumented.3rtapi",
|
|
"src:file:linuxcnc/docs/man/man9/abs.9",
|
|
"src:file:linuxcnc/docs/man/man9/abs_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/abs_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/and2.9",
|
|
"src:file:linuxcnc/docs/man/man9/anglejog.9",
|
|
"src:file:linuxcnc/docs/man/man9/at_pid.9",
|
|
"src:file:linuxcnc/docs/man/man9/axis.9",
|
|
"src:file:linuxcnc/docs/man/man9/axistest.9",
|
|
"src:file:linuxcnc/docs/man/man9/bin2gray.9",
|
|
"src:file:linuxcnc/docs/man/man9/biquad.9",
|
|
"src:file:linuxcnc/docs/man/man9/bitslice.9",
|
|
"src:file:linuxcnc/docs/man/man9/bitwise.9",
|
|
"src:file:linuxcnc/docs/man/man9/bldc.9",
|
|
"src:file:linuxcnc/docs/man/man9/blend.9",
|
|
"src:file:linuxcnc/docs/man/man9/carousel.9",
|
|
"src:file:linuxcnc/docs/man/man9/charge_pump.9",
|
|
"src:file:linuxcnc/docs/man/man9/clarke2.9",
|
|
"src:file:linuxcnc/docs/man/man9/clarke3.9",
|
|
"src:file:linuxcnc/docs/man/man9/clarkeinv.9",
|
|
"src:file:linuxcnc/docs/man/man9/classicladder.9",
|
|
"src:file:linuxcnc/docs/man/man9/comp.9",
|
|
"src:file:linuxcnc/docs/man/man9/constant.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_bit_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_bit_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_bit_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_bit_u32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_bit_u64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_float_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_float_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_float_u32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_float_u64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s32_bit.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s32_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s32_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s32_u32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s32_u64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s64_bit.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s64_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s64_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s64_u32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_s64_u64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u32_bit.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u32_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u32_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u32_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u32_u64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u64_bit.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u64_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u64_s32.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u64_s64.9",
|
|
"src:file:linuxcnc/docs/man/man9/conv_u64_u32.9",
|
|
"src:file:linuxcnc/docs/man/man9/corexy_by_hal.9",
|
|
"src:file:linuxcnc/docs/man/man9/counter.9",
|
|
"src:file:linuxcnc/docs/man/man9/dbounce.9",
|
|
"src:file:linuxcnc/docs/man/man9/ddt.9",
|
|
"src:file:linuxcnc/docs/man/man9/deadzone.9",
|
|
"src:file:linuxcnc/docs/man/man9/debounce.9",
|
|
"src:file:linuxcnc/docs/man/man9/demux.9",
|
|
"src:file:linuxcnc/docs/man/man9/differential.9",
|
|
"src:file:linuxcnc/docs/man/man9/div2.9",
|
|
"src:file:linuxcnc/docs/man/man9/edge.9",
|
|
"src:file:linuxcnc/docs/man/man9/encoder.9",
|
|
"src:file:linuxcnc/docs/man/man9/encoder_ratio.9",
|
|
"src:file:linuxcnc/docs/man/man9/enum.9",
|
|
"src:file:linuxcnc/docs/man/man9/eoffset_per_angle.9",
|
|
"src:file:linuxcnc/docs/man/man9/estop_latch.9",
|
|
"src:file:linuxcnc/docs/man/man9/feedcomp.9",
|
|
"src:file:linuxcnc/docs/man/man9/filter_kalman.9",
|
|
"src:file:linuxcnc/docs/man/man9/flipflop.9",
|
|
"src:file:linuxcnc/docs/man/man9/gantry.9",
|
|
"src:file:linuxcnc/docs/man/man9/gantrykins.9",
|
|
"src:file:linuxcnc/docs/man/man9/gearchange.9",
|
|
"src:file:linuxcnc/docs/man/man9/genhexkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/genserkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/gentrivkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/gladevcp.9",
|
|
"src:file:linuxcnc/docs/man/man9/gray2bin.9",
|
|
"src:file:linuxcnc/docs/man/man9/hal_bb_gpio.9",
|
|
"src:file:linuxcnc/docs/man/man9/hal_parport.9",
|
|
"src:file:linuxcnc/docs/man/man9/histobins.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_7i43.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_7i90.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_eth.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_pci.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_rpspi.9",
|
|
"src:file:linuxcnc/docs/man/man9/hm2_spi.9",
|
|
"src:file:linuxcnc/docs/man/man9/homecomp.9",
|
|
"src:file:linuxcnc/docs/man/man9/hostmot2.9",
|
|
"src:file:linuxcnc/docs/man/man9/hypot.9",
|
|
"src:file:linuxcnc/docs/man/man9/ilowpass.9",
|
|
"src:file:linuxcnc/docs/man/man9/integ.9",
|
|
"src:file:linuxcnc/docs/man/man9/invert.9",
|
|
"src:file:linuxcnc/docs/man/man9/joyhandle.9",
|
|
"src:file:linuxcnc/docs/man/man9/kins.9",
|
|
"src:file:linuxcnc/docs/man/man9/knob2float.9",
|
|
"src:file:linuxcnc/docs/man/man9/laserpower.9",
|
|
"src:file:linuxcnc/docs/man/man9/latencybins.9",
|
|
"src:file:linuxcnc/docs/man/man9/lcd.9",
|
|
"src:file:linuxcnc/docs/man/man9/led_dim.9",
|
|
"src:file:linuxcnc/docs/man/man9/limit1.9",
|
|
"src:file:linuxcnc/docs/man/man9/limit2.9",
|
|
"src:file:linuxcnc/docs/man/man9/limit3.9",
|
|
"src:file:linuxcnc/docs/man/man9/limit_axis.9",
|
|
"src:file:linuxcnc/docs/man/man9/lincurve.9",
|
|
"src:file:linuxcnc/docs/man/man9/lineardeltakins.9",
|
|
"src:file:linuxcnc/docs/man/man9/logic.9",
|
|
"src:file:linuxcnc/docs/man/man9/lowpass.9",
|
|
"src:file:linuxcnc/docs/man/man9/lut5.9",
|
|
"src:file:linuxcnc/docs/man/man9/maj3.9",
|
|
"src:file:linuxcnc/docs/man/man9/match8.9",
|
|
"src:file:linuxcnc/docs/man/man9/matrix_kb.9",
|
|
"src:file:linuxcnc/docs/man/man9/matrixkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/max31855.9",
|
|
"src:file:linuxcnc/docs/man/man9/maxkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/mesa_7i65.9",
|
|
"src:file:linuxcnc/docs/man/man9/mesa_pktgyro_test.9",
|
|
"src:file:linuxcnc/docs/man/man9/mesa_uart.9",
|
|
"src:file:linuxcnc/docs/man/man9/message.9",
|
|
"src:file:linuxcnc/docs/man/man9/millturn.9",
|
|
"src:file:linuxcnc/docs/man/man9/minmax.9",
|
|
"src:file:linuxcnc/docs/man/man9/motion.9",
|
|
"src:file:linuxcnc/docs/man/man9/moveoff.9",
|
|
"src:file:linuxcnc/docs/man/man9/mult2.9",
|
|
"src:file:linuxcnc/docs/man/man9/multiclick.9",
|
|
"src:file:linuxcnc/docs/man/man9/multiswitch.9",
|
|
"src:file:linuxcnc/docs/man/man9/mux16.9",
|
|
"src:file:linuxcnc/docs/man/man9/mux2.9",
|
|
"src:file:linuxcnc/docs/man/man9/mux4.9",
|
|
"src:file:linuxcnc/docs/man/man9/mux8.9",
|
|
"src:file:linuxcnc/docs/man/man9/mux_generic.9",
|
|
"src:file:linuxcnc/docs/man/man9/near.9",
|
|
"src:file:linuxcnc/docs/man/man9/not.9",
|
|
"src:file:linuxcnc/docs/man/man9/offset.9",
|
|
"src:file:linuxcnc/docs/man/man9/ohmic.9",
|
|
"src:file:linuxcnc/docs/man/man9/oneshot.9",
|
|
"src:file:linuxcnc/docs/man/man9/opto_ac5.9",
|
|
"src:file:linuxcnc/docs/man/man9/or2.9",
|
|
"src:file:linuxcnc/docs/man/man9/orient.9",
|
|
"src:file:linuxcnc/docs/man/man9/pentakins.9",
|
|
"src:file:linuxcnc/docs/man/man9/pid.9",
|
|
"src:file:linuxcnc/docs/man/man9/plasmac.9",
|
|
"src:file:linuxcnc/docs/man/man9/pumakins.9",
|
|
"src:file:linuxcnc/docs/man/man9/pwmgen.9",
|
|
"src:file:linuxcnc/docs/man/man9/raster.9",
|
|
"src:file:linuxcnc/docs/man/man9/reset.9",
|
|
"src:file:linuxcnc/docs/man/man9/rosekins.9",
|
|
"src:file:linuxcnc/docs/man/man9/rotatekins.9",
|
|
"src:file:linuxcnc/docs/man/man9/safety_latch.9",
|
|
"src:file:linuxcnc/docs/man/man9/sample_hold.9",
|
|
"src:file:linuxcnc/docs/man/man9/sampler.9",
|
|
"src:file:linuxcnc/docs/man/man9/scale.9",
|
|
"src:file:linuxcnc/docs/man/man9/scaled_s32_sums.9",
|
|
"src:file:linuxcnc/docs/man/man9/scarakins.9",
|
|
"src:file:linuxcnc/docs/man/man9/select8.9",
|
|
"src:file:linuxcnc/docs/man/man9/serport.9",
|
|
"src:file:linuxcnc/docs/man/man9/setsserial.9",
|
|
"src:file:linuxcnc/docs/man/man9/siggen.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_axis_hardware.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_encoder.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_home_switch.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_matrix_kb.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_parport.9",
|
|
"src:file:linuxcnc/docs/man/man9/sim_spindle.9",
|
|
"src:file:linuxcnc/docs/man/man9/simple_tp.9",
|
|
"src:file:linuxcnc/docs/man/man9/sphereprobe.9",
|
|
"src:file:linuxcnc/docs/man/man9/spindle.9",
|
|
"src:file:linuxcnc/docs/man/man9/spindle_monitor.9",
|
|
"src:file:linuxcnc/docs/man/man9/sserial.9",
|
|
"src:file:linuxcnc/docs/man/man9/stepgen.9",
|
|
"src:file:linuxcnc/docs/man/man9/steptest.9",
|
|
"src:file:linuxcnc/docs/man/man9/streamer.9",
|
|
"src:file:linuxcnc/docs/man/man9/sum2.9",
|
|
"src:file:linuxcnc/docs/man/man9/supply.9",
|
|
"src:file:linuxcnc/docs/man/man9/thc.9",
|
|
"src:file:linuxcnc/docs/man/man9/thcud.9",
|
|
"src:file:linuxcnc/docs/man/man9/threads.9",
|
|
"src:file:linuxcnc/docs/man/man9/threadtest.9",
|
|
"src:file:linuxcnc/docs/man/man9/time.9",
|
|
"src:file:linuxcnc/docs/man/man9/timedelay.9",
|
|
"src:file:linuxcnc/docs/man/man9/timedelta.9",
|
|
"src:file:linuxcnc/docs/man/man9/tof.9",
|
|
"src:file:linuxcnc/docs/man/man9/toggle.9",
|
|
"src:file:linuxcnc/docs/man/man9/toggle2nist.9",
|
|
"src:file:linuxcnc/docs/man/man9/ton.9",
|
|
"src:file:linuxcnc/docs/man/man9/tp.9",
|
|
"src:file:linuxcnc/docs/man/man9/tpcomp.9",
|
|
"src:file:linuxcnc/docs/man/man9/tripodkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/tristate_bit.9",
|
|
"src:file:linuxcnc/docs/man/man9/tristate_float.9",
|
|
"src:file:linuxcnc/docs/man/man9/trivkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/updown.9",
|
|
"src:file:linuxcnc/docs/man/man9/userkins.9",
|
|
"src:file:linuxcnc/docs/man/man9/watchdog.9",
|
|
"src:file:linuxcnc/docs/man/man9/wcomp.9",
|
|
"src:file:linuxcnc/docs/man/man9/weighted_sum.9",
|
|
"src:file:linuxcnc/docs/man/man9/xhc_hb04_util.9",
|
|
"src:file:linuxcnc/docs/man/man9/xor2.9",
|
|
"src:file:linuxcnc/docs/man/man9/xyzab_tdr_kins.9",
|
|
"src:file:linuxcnc/docs/man/stylesheet.9",
|
|
"src:file:linuxcnc/docs/po/ar.po",
|
|
"src:file:linuxcnc/docs/po/bg.po",
|
|
"src:file:linuxcnc/docs/po/cs.po",
|
|
"src:file:linuxcnc/docs/po/da.po",
|
|
"src:file:linuxcnc/docs/po/de.po",
|
|
"src:file:linuxcnc/docs/po/documentation.pot",
|
|
"src:file:linuxcnc/docs/po/es.po",
|
|
"src:file:linuxcnc/docs/po/fr.po",
|
|
"src:file:linuxcnc/docs/po/hu.po",
|
|
"src:file:linuxcnc/docs/po/it.po",
|
|
"src:file:linuxcnc/docs/po/ka.po",
|
|
"src:file:linuxcnc/docs/po/nb.po",
|
|
"src:file:linuxcnc/docs/po/pl.po",
|
|
"src:file:linuxcnc/docs/po/pt.po",
|
|
"src:file:linuxcnc/docs/po/pt_BR.po",
|
|
"src:file:linuxcnc/docs/po/ru.po",
|
|
"src:file:linuxcnc/docs/po/sk.po",
|
|
"src:file:linuxcnc/docs/po/sv.po",
|
|
"src:file:linuxcnc/docs/po/tr.po",
|
|
"src:file:linuxcnc/docs/po/uk.po",
|
|
"src:file:linuxcnc/docs/po/vi.po",
|
|
"src:file:linuxcnc/docs/po/zh_CN.po",
|
|
"src:file:linuxcnc/docs/po4a.cfg",
|
|
"src:file:linuxcnc/docs/src/.gitignore",
|
|
"src:file:linuxcnc/docs/src/Master_Developer.adoc",
|
|
"src:file:linuxcnc/docs/src/Master_Getting_Started.adoc",
|
|
"src:file:linuxcnc/docs/src/Master_Integrator.adoc",
|
|
"src:file:linuxcnc/docs/src/Submakefile",
|
|
"src:file:linuxcnc/docs/src/asciideps",
|
|
"src:file:linuxcnc/docs/src/asciidoc-dont-replace-arrows.conf",
|
|
"src:file:linuxcnc/docs/src/attribute-colon.conf",
|
|
"src:file:linuxcnc/docs/src/checklinks.py",
|
|
"src:file:linuxcnc/docs/src/checkref",
|
|
"src:file:linuxcnc/docs/src/code/.gitignore",
|
|
"src:file:linuxcnc/docs/src/code/CMS_buffer.eps",
|
|
"src:file:linuxcnc/docs/src/code/CMS_buffer.png",
|
|
"src:file:linuxcnc/docs/src/code/LinuxCNC-block-diagram-small.png",
|
|
"src:file:linuxcnc/docs/src/code/LinuxCNC-block-diagram-small_es.png",
|
|
"src:file:linuxcnc/docs/src/code/LinuxCNC-block-diagram.png",
|
|
"src:file:linuxcnc/docs/src/code/LinuxCNC-motion-controller-small.png",
|
|
"src:file:linuxcnc/docs/src/code/LinuxCNC-motion-controller.png",
|
|
"src:file:linuxcnc/docs/src/code/adding-configs.adoc",
|
|
"src:file:linuxcnc/docs/src/code/building-linuxcnc.adoc",
|
|
"src:file:linuxcnc/docs/src/code/code-notes.adoc",
|
|
"src:file:linuxcnc/docs/src/code/contributing-to-linuxcnc.adoc",
|
|
"src:file:linuxcnc/docs/src/code/emc2-motion-joint-controller-block-diag.dxf",
|
|
"src:file:linuxcnc/docs/src/code/emc2-motion-joint-controller-block-diag.eps",
|
|
"src:file:linuxcnc/docs/src/code/emc2-motion-joint-controller-block-diag.png",
|
|
"src:file:linuxcnc/docs/src/code/emc2-motion-joint-controller-block-diag.ps",
|
|
"src:file:linuxcnc/docs/src/code/emc2-motion-joint-controller-block-diag_es.png",
|
|
"src:file:linuxcnc/docs/src/code/homing.dot",
|
|
"src:file:linuxcnc/docs/src/code/homing_es.dot",
|
|
"src:file:linuxcnc/docs/src/code/hss.dot",
|
|
"src:file:linuxcnc/docs/src/code/hss_es.dot",
|
|
"src:file:linuxcnc/docs/src/code/nml-messages.adoc",
|
|
"src:file:linuxcnc/docs/src/code/style-guide.adoc",
|
|
"src:file:linuxcnc/docs/src/code/task-state-transitions.dot",
|
|
"src:file:linuxcnc/docs/src/code/task-state-transitions_es.dot",
|
|
"src:file:linuxcnc/docs/src/code/writing-tests.adoc",
|
|
"src:file:linuxcnc/docs/src/common/.gitignore",
|
|
"src:file:linuxcnc/docs/src/common/images/configuration-selector1_fr.png",
|
|
"src:file:linuxcnc/docs/src/common/images/emc2-intro.png",
|
|
"src:file:linuxcnc/docs/src/common/images/lathe_tool.png",
|
|
"src:file:linuxcnc/docs/src/common/images/naive-cam.dxf",
|
|
"src:file:linuxcnc/docs/src/common/images/pid-feedback.svg",
|
|
"src:file:linuxcnc/docs/src/common/images/pid-feedback_fr.png",
|
|
"src:file:linuxcnc/docs/src/common/images/pid-feedback_fr.svg",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback.dxf",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback.eps",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback.ps",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback.svg",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback_fr.png",
|
|
"src:file:linuxcnc/docs/src/common/images/servo-feedback_fr.svg",
|
|
"src:file:linuxcnc/docs/src/config/.gitignore",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel.png",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel_V2.png",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel_V2.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel_V3.png",
|
|
"src:file:linuxcnc/docs/src/config/images/HomeAxisTravel_V3.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/calibration-1.png",
|
|
"src:file:linuxcnc/docs/src/config/images/calibration-2.png",
|
|
"src:file:linuxcnc/docs/src/config/images/calibration-3.png",
|
|
"src:file:linuxcnc/docs/src/config/images/d-term.png",
|
|
"src:file:linuxcnc/docs/src/config/images/emc2-motion-homing-diag.dxf",
|
|
"src:file:linuxcnc/docs/src/config/images/emc2-motion-homing-diag.eps",
|
|
"src:file:linuxcnc/docs/src/config/images/emc2-motion-homing-diag.png",
|
|
"src:file:linuxcnc/docs/src/config/images/emc2-motion-homing-diag.ps",
|
|
"src:file:linuxcnc/docs/src/config/images/encoder-counts-math.png",
|
|
"src:file:linuxcnc/docs/src/config/images/encoder-scale.png",
|
|
"src:file:linuxcnc/docs/src/config/images/ff2.png",
|
|
"src:file:linuxcnc/docs/src/config/images/i-term.png",
|
|
"src:file:linuxcnc/docs/src/config/images/latency-histogram.png",
|
|
"src:file:linuxcnc/docs/src/config/images/latency-plot.png",
|
|
"src:file:linuxcnc/docs/src/config/images/latency-test_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/latency.png",
|
|
"src:file:linuxcnc/docs/src/config/images/linuxcnc-motion-homing-diag_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/linuxcnc-motion-homing-diag_fr.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/output-offset.png",
|
|
"src:file:linuxcnc/docs/src/config/images/p-term.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pid-feedback.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-advanced.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-advanced_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-axis-config.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-axis-config_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-axis-drive.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-axis-drive_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-basic.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-basic_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-diagram-lathe.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-diagram-lathe_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-external.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-external_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-file.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-file_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-gui.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-gui_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-hal.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-hal_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-config.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-config_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io2.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io2_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io3.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io3_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io4.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-mesa-io4_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-parport.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-parport_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-scale-calc.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-scale-calc_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-spindle-config.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-spindle-config_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-splash.png",
|
|
"src:file:linuxcnc/docs/src/config/images/pncconf-splash_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/scale-math.png",
|
|
"src:file:linuxcnc/docs/src/config/images/servo-feedback.png",
|
|
"src:file:linuxcnc/docs/src/config/images/step-calc-inch-math.png",
|
|
"src:file:linuxcnc/docs/src/config/images/step-calc-mm-math.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-advanced_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-axis-x_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-axis-x_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-axis_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-base_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-base_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-basic_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-config_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-confirm_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-end_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-options_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-options_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-parallel-1_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-parallel-1_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-parallel-2_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-parallel-2_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-pinout_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-spindle_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-spindle_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-spindle_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-splash_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-start_1_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-start_2_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-start_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-test.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-test_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-x-test_en.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepconf-x-test_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/stepper-scale.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series.dxf",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series.eps",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series_en.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-nc-series_fr.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel.dxf",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel.eps",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel_en.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel_es.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel_fr.png",
|
|
"src:file:linuxcnc/docs/src/config/images/switch-no-parallel_fr.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/templates/step-calc-inch-math_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/templates/step-calc-mm-math_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/templates/switch-nc-series_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/config/images/templates/switch-no-parallel_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/docbook-image.conf",
|
|
"src:file:linuxcnc/docs/src/docbook.conf",
|
|
"src:file:linuxcnc/docs/src/docs.xml",
|
|
"src:file:linuxcnc/docs/src/drivers/hal_pi_gpio.txt",
|
|
"src:file:linuxcnc/docs/src/drivers/images/5i20-halpins.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_AXISpinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_AxisInterface.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_ENDSWpinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_IOpinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_PCIpinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_RS485topology.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GM_RefSignals.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/GMsystem.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pico-ppmc-math.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-pinout.dxf",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-pinout.eps",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-pinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-step-pinout.dxf",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-step-pinout.eps",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto-step-pinout.png",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto_step_waveform.dxf",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto_step_waveform.eps",
|
|
"src:file:linuxcnc/docs/src/drivers/images/pluto_step_waveform.png",
|
|
"src:file:linuxcnc/docs/src/drivers/mesa_modbus.adoc",
|
|
"src:file:linuxcnc/docs/src/emc2.sty",
|
|
"src:file:linuxcnc/docs/src/examples/images/gridprobe-ngc.png",
|
|
"src:file:linuxcnc/docs/src/examples/images/smartprobe-ngc.png",
|
|
"src:file:linuxcnc/docs/src/examples/images/spindle-math.png",
|
|
"src:file:linuxcnc/docs/src/examples/images/useful-subroutines-ngc.png",
|
|
"src:file:linuxcnc/docs/src/gcode/.gitignore",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81a.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81ex1.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81ex2.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81g98d.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81mult.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G81ret.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G87pre.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G87s1.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G87s12.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/G87s5.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/ToolTable-TouchOff.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/ToolTable-TouchOff_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp-path.dxf",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp-path.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp-path_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp-path_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp-path_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp02.dxf",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp02.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/comp02_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/eight-holes_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/eight-holes_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/eight.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g2-3_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g2-3_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g2_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g2_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g2_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g76-01.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g76-threads_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g76-threads_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g76.dxf",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81a_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81a_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81ex1_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81ex1_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81ex2_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81ex2_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81mult_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/g81mult_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/inside-comp.dxf",
|
|
"src:file:linuxcnc/docs/src/gcode/images/inside-comp.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/inside-comp_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/inside-comp_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/lathe-tool.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/lathe-tool_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/lathe-tool_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/length1.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/nurbs01.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/offsets.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/offsets_es.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/outside-comp.dxf",
|
|
"src:file:linuxcnc/docs/src/gcode/images/outside-comp.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/outside-comp_fr.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/outside-comp_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/partdraw1.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/polar01.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/polar02.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp_arc.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp_entry.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp_entry_simple.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp_error.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/radius_comp_straight.png",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/comp-path_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/comp02_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/eight-holes_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g2-3_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g2_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g76-threads_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g81_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g81a_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g81ex1_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g81ex2_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/g81mult_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/inside-comp_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/lathe-tool_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/outside-comp_fr.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/templates/twelve-holes-square_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/twelve-holes_en.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/twelve-holes_es.svg",
|
|
"src:file:linuxcnc/docs/src/gcode/images/twelve.png",
|
|
"src:file:linuxcnc/docs/src/gen_complist.py",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/configuration-selector.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/configuration-selector1_fr.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/configuration-selector_es.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/copy-configuration_fr.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/latency.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/step-calc-inch-math.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/step-calc-mm-math.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/updating-lucid-to-2.6.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/upgrading-to-2.8.png",
|
|
"src:file:linuxcnc/docs/src/getting-started/images/upgrading_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/.gitignore",
|
|
"src:file:linuxcnc/docs/src/gui/images/Hal_Dial.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/JogWheel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/SpeedControl.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-2.5.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-back-tool-lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-codeentry_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-currentandselected.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-currentandselected_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-currentandselected_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-emc-status.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-emc-status_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-foam.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-foam_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-gladevcp.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-homed.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-lathe-tool.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-limit.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-machineorigin.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-mdi.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-mdi_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-outofrange.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis-pyvcp.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/axis_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/blender.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/button.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/checkbutton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/combi_dro.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/designer_button_property.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/designer_slots.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-float-small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-float.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-panel-small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-panel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-tabbed-small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/example-tabbed.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gaxis.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/glade-manual-small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/glade-manual.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/glade-myui.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_3_axis.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_3_axis_mid.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_5_axis.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_5_axis_mid.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_back_tool_lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_embedded_tabs.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_file_selection_dialog_with_keyboard.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_getting_macro_info.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_getting_macro_info_mid.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_icon_theme_symbolic.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_keyboard_edit_mode.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_keyboard_edit_mode_mid.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_manual_toolchange.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_ntb_preview.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_ntb_preview_small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_plasma.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_settings_advanced.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_settings_appearance.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_settings_button.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_settings_hardware.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_sim_hardware_button.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_sim_hardware_button_mid.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_tool_info.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_with_right_panel_in_MDI_mode.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gmoccapy_with_right_panel_in_MDI_mode_small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin.jpg",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_non-rotated.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_non-rotated_link.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_non-rotated_thumb.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_rotated_30.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_rotated_30_link.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gremlin_extents_rotated_30_thumb.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gs2_panel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gscreen-lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gscreen-mill.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/gtk-tooledit.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal-pin-change-66.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal-pin-change-cut.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal-pin-change.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal_hbar.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal_meter.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hal_sourceview.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/holes.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/hscale.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/i2g-roughing.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/iconview.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/image-to-gcode.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/industrial.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/leds.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/manual-tool-change.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/manual-tool-change_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/manualtoolchange_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/mdro.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-1.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-1_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-2.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-2_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-3.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui-db25-3_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ngcgui_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/offsetpage.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/oword.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/progressbar2.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ptest-final.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/ptest.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp-rth.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_AXIS_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_axis_lathe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_bar.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_borders.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_button.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_checkbutton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_checkbutton1.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_checkbutton2.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_dial.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_group.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_hbox.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_image01.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_image02.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_image_u32_01.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_jogwheel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_label.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_label_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_labelframe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_labelframe_fr1.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_led.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_meter.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_mypanel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_mypanel_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_number.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_radiobutton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_radiobutton_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_rectled.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_s32.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_scale.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_spinbox.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_table.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_tabs1.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_tabs2.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_tabs3.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/pyvcp_vbox.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qt_cnc.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtaxis.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_hd.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_hd_gcoderipper.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_hd_workpiece_probe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_setup_page.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_spindle_belts.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_touchplate.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtdragon_versaprobe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qthalbar.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp-cam-align.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_HALPad.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_actionButton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_basicProbe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_calculator.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_copy_dialog.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_fileDialog.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_fileManager.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_focusOverlay.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_gcodeGraphics.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_ledWidget.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_machineLog.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_macro.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_mdiTouchy.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_ngcgui.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_ngcgui_custom.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_nurbsEditor.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_offsetpage.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_originoffsetview.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_round_gauge.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_runFromLine.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_sim_panel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_spindle_belts.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_test_button.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_test_dial.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_test_led.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_test_panel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_tester.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_toolChange.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_toolOffset.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_tooloffsetview.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvcp_versaProbe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach_5axis_gantry.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach_fanuc_200f.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach_millturn.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach_router_atc.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/qtvismach_scara.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/radiobutton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/silverdragon.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/silverdragon_custom.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/silverdragon_probe.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/silverdragon_setup.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/sketch_auto_tool_measurement.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/small-screenshot.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/spartan.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/speed.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/spinbutton.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/statusImageSwitcher.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/strange_numbers.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/style-comparison.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/test_panel.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tester.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tester_editor.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tkemc-interp.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tkemc-mdi.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tkemc-override-limits.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tkemc.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tklinuxcnc_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tklinuxcnc_interp_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_axis_p.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_axis_x.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_axis_y.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_axis_z.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_axis_z2.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_blockdelete.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_clear.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_estop.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_open.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_optpause.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_pause.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_power.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_reload.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_rotate.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_run.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_step.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_stop.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_zoomin.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tool_zoomout.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit-columns.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit-columns_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit-sort.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit-sort_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit-warning_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooledit_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/tooltouchoff.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchoff.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchoff_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchoff_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy-tab-33.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy-tab-small.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy-tab.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy_es.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/touchy_fr.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/vcp-actions.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/vismach.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/vscale.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/whoareyou.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/x1mill.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/xyz_ACO.png",
|
|
"src:file:linuxcnc/docs/src/gui/images/xyz_buttons.png",
|
|
"src:file:linuxcnc/docs/src/hal/.gitignore",
|
|
"src:file:linuxcnc/docs/src/hal/general-ref.adoc",
|
|
"src:file:linuxcnc/docs/src/hal/halshow.adoc",
|
|
"src:file:linuxcnc/docs/src/hal/images/HAL_Configuration.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/encoder-block-diag.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/encoder-block-diag.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/encoder-block-diag.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal-histogram.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal-meter01.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal-meter02.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_circuit_concept.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_encoder_block_diag.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_parport_block_diag.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_pid_block_diag.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_stepgen_block_diag.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_stepgen_type0.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_stepgen_type11_14.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_stepgen_type2_4.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/hal_stepgen_type5_10.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-1.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-1_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-demo-1.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-demo-2.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-demo-3.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-select.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halmeter-select_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-01.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-01_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-02.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-02_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-03.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-03_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-04.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-04_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-05.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-05_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-06.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-06_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-07.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-07_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-08.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-08_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-09.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-09_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-10.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-10_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-11.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-11_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-1.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-2.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-3.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-4.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-5.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-6.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-7.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halscope-demo-8.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-2.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-2_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-3.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-4.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-5.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-layout.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-settings.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-show-tab.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/halshow-watch-tab-1.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/parport-block-diag.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/parport-block-diag.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/parport-block-diag.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/pid-block-diag.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/pid-block-diag.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/pid_block_diag.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto-pinout.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto-pinout.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto-pinout.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto-step-pinout.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto-step-pinout.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto_step_waveform.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/pluto_step_waveform.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/remote-start.dxf",
|
|
"src:file:linuxcnc/docs/src/hal/images/remote-start.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/signal-direction.odg",
|
|
"src:file:linuxcnc/docs/src/hal/images/signal-direction.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/sim_pin.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/simulate_probe.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/softstart-scope.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/softstart-scope_fr.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-block-diag.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-block-diag.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-block-diag.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type0.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type0.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type0.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type11-14.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type11-14.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type11-14.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type2-4.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type2-4.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type2-4.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type5-10.eps",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type5-10.png",
|
|
"src:file:linuxcnc/docs/src/hal/images/stepgen-type5-10.svg",
|
|
"src:file:linuxcnc/docs/src/hal/images/velocity-01.png",
|
|
"src:file:linuxcnc/docs/src/hal/out8.comp",
|
|
"src:file:linuxcnc/docs/src/hal/rand.comp",
|
|
"src:file:linuxcnc/docs/src/html-images.xslt",
|
|
"src:file:linuxcnc/docs/src/html-latex-images",
|
|
"src:file:linuxcnc/docs/src/image-wildcard",
|
|
"src:file:linuxcnc/docs/src/index.foot",
|
|
"src:file:linuxcnc/docs/src/index.tmpl",
|
|
"src:file:linuxcnc/docs/src/install/.gitignore",
|
|
"src:file:linuxcnc/docs/src/integrator/images/inductance-pulse-response-fast-charge.png",
|
|
"src:file:linuxcnc/docs/src/integrator/images/inductance-pulse-response-slow-charge.png",
|
|
"src:file:linuxcnc/docs/src/integrator/images/inductance-step-response.png",
|
|
"src:file:linuxcnc/docs/src/integrator/stepper-timing.adoc",
|
|
"src:file:linuxcnc/docs/src/integrator/steppers.adoc",
|
|
"src:file:linuxcnc/docs/src/integrator/wiring.adoc",
|
|
"src:file:linuxcnc/docs/src/ladder/.gitignore",
|
|
"src:file:linuxcnc/docs/src/ladder/images/AssignCompare-Ladder.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Assignment_Expression.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Bit_Status.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Comparison_Expression.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Config-com.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Config-io.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Config.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Default_Section_Display.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Default_Sections_Manager.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Default_Symbols_names.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/EStop_Section_Display.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Editor.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Editor_NO_Input.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/SaveAs.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Section_Display_Build01.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Section_Display_Build02.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Section_Display_Build03.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Section_Display_Grid.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/Tmr_Section_Display.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/axis_cl-estop.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/example_link_contact_coil.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/example_link_contact_coil2.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/example_link_contact_coil3.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/extra-pulse-reject.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/ladder_action_load.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/ladder_action_loadbar.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/ladder_action_out.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/modbus_com_setting.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/modbus_register_setting.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/sequence-editor.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/stepconf_ladder.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/watch_window.png",
|
|
"src:file:linuxcnc/docs/src/ladder/images/wrapping-counter.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/control-point_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/control-point_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/control-point_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/control_point.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-1_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-1_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-1_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-2_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-2_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-2_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-3_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-3_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-3_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-4_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-4_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius-4_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius_1.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius_2.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius_3.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/radius_4.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-cut_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-cut_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-cut_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-entry_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-entry_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp-entry_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp_cut.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/ramp_entry.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-control-point_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-radius-1_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-radius-2_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-radius-3_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-radius-4_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-ramp-cut_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-ramp-entry_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-1_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-2_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-3_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-4_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-5_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-6_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-7_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/templates/lathe-tool-pos-8_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-1_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-1_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-1_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-2_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-2_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-2_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-3_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-3_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-3_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-4_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-4_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-4_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-5_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-5_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-5_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-6_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-6_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-6_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-7_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-7_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-7_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-8_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-8_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-pos-8_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-positions_en.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool-positions_es.svg",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_1.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_2.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_3.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_4.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_5.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_6.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_7.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_pos_8.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_positions_es.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_positions_fr.png",
|
|
"src:file:linuxcnc/docs/src/lathe/images/tool_positions_fr.svg",
|
|
"src:file:linuxcnc/docs/src/links.py",
|
|
"src:file:linuxcnc/docs/src/links.xslt",
|
|
"src:file:linuxcnc/docs/src/links_db_gen.py",
|
|
"src:file:linuxcnc/docs/src/man/man1/halstreamer.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man1/hy_gt_vfd.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man1/linuxcnc.1.in",
|
|
"src:file:linuxcnc/docs/src/man/man1/mqtt-publisher.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man1/sendkeys.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man1/svd-ps_vfd.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man1/xhc-whb04b-6.1.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man3/hm2_pktuart.3.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man3/skeleton.3hal",
|
|
"src:file:linuxcnc/docs/src/man/man3/skeleton.3rtapi",
|
|
"src:file:linuxcnc/docs/src/man/man9/enum.9.adoc",
|
|
"src:file:linuxcnc/docs/src/man/man9/skeleton.9",
|
|
"src:file:linuxcnc/docs/src/man/man9/streamer.9.adoc",
|
|
"src:file:linuxcnc/docs/src/mkpre.py",
|
|
"src:file:linuxcnc/docs/src/motion/.gitignore",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-1.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-10.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-11.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-2.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-3.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-4.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-5.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-6.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-7.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-8.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/Figure-9.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__1.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__10.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__11.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__12.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__13.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__14.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__15.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__16.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__17.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__18.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__19.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__2.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__20.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__21.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__22.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__23.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__24.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__25.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__26.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__27.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__28.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__29.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__3.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__30.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__31.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__32.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__33.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__34.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__35.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__36.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__37.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__38.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__4.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__5.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__6.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__7.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__8.png",
|
|
"src:file:linuxcnc/docs/src/motion/5-axis-figures/equation__9.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/bipod.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-01.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-02.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-03.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-04.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-05.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-06.png",
|
|
"src:file:linuxcnc/docs/src/motion/images/kinematics-math-07.png",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-000.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-001.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-002.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-003.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-004.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-005.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-006.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-007.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-008.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-009.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-010.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-011.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-012.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-013.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-014.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-015.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-016.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-017.jpg",
|
|
"src:file:linuxcnc/docs/src/motion/rv-6sl/rv-6sl-018.jpg",
|
|
"src:file:linuxcnc/docs/src/plasma/images/Screenshot_2022-10-14_13-43-32.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_cut-angularity.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_hypersensing.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_kerf-cross.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_ohmic-sensing.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_thc-delay.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_torch-head.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/primer_volts-height.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_16x9.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_4x3.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_9x16.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_camview.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_cfg2prefs.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_conv_block.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_conv_line.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_conv_shapes.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_conversational.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_cut_recovery.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_heights_diagram.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_keypad.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_material_fusion360_dialog.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_material_main_fusion360.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_material_main_manual.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_material_main_sheetcam.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_material_manual_dialog.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_numpad.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_parameters.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_peripheral_offsets_cam.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_peripheral_offsets_confirm.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_peripheral_offsets_delay.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_peripheral_offsets_get.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_peripheral_offsets_set.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_plasmac2qt.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_pncconf_buttons.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_pncconf_screen.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_pncconf_thcad.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_reed_arc_ok.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_relay_contact.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_rs485_converter.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_rs485_dtech.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_rs485_pmx.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_rs485_sunnix.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_run_from_line.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_settings.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_setup.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_single_cut.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_stats.png",
|
|
"src:file:linuxcnc/docs/src/plasma/images/qtplasmac_stepconf_options.png",
|
|
"src:file:linuxcnc/docs/src/remap/Makefile",
|
|
"src:file:linuxcnc/docs/src/remap/images/debug_embedded_python.png",
|
|
"src:file:linuxcnc/docs/src/remap/iocontrol-change-aborted.msc",
|
|
"src:file:linuxcnc/docs/src/remap/iocontrol-change.msc",
|
|
"src:file:linuxcnc/docs/src/remap/iocontrol-prepare.msc",
|
|
"src:file:linuxcnc/docs/src/source-highlight/README",
|
|
"src:file:linuxcnc/docs/src/source-highlight/Submakefile",
|
|
"src:file:linuxcnc/docs/src/source-highlight/emc-langs-source-highlight.conf",
|
|
"src:file:linuxcnc/docs/src/source-highlight/hal-demo.adoc",
|
|
"src:file:linuxcnc/docs/src/source-highlight/hal-test.hal",
|
|
"src:file:linuxcnc/docs/src/source-highlight/hal.lang",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ini-demo.adoc",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ini-test.ini",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ini.lang",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ngc-demo.adoc",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ngc-test.ngc",
|
|
"src:file:linuxcnc/docs/src/source-highlight/ngc.lang",
|
|
"src:file:linuxcnc/docs/src/terms.xml",
|
|
"src:file:linuxcnc/docs/src/user/images/axis_25_fr.png",
|
|
"src:file:linuxcnc/docs/src/user/images/configuration-selector.png",
|
|
"src:file:linuxcnc/docs/src/user/images/configuration-selector_es.png",
|
|
"src:file:linuxcnc/docs/src/user/images/gmoccapy_4_axis.png",
|
|
"src:file:linuxcnc/docs/src/user/images/lathe-diagram.png",
|
|
"src:file:linuxcnc/docs/src/user/images/lathe-diagram_en.svg",
|
|
"src:file:linuxcnc/docs/src/user/images/lathe-diagram_es.png",
|
|
"src:file:linuxcnc/docs/src/user/images/mill-diagram.png",
|
|
"src:file:linuxcnc/docs/src/user/images/mill-diagram_en.svg",
|
|
"src:file:linuxcnc/docs/src/user/images/mill-diagram_es.png",
|
|
"src:file:linuxcnc/docs/src/user/images/naive-cam.png",
|
|
"src:file:linuxcnc/docs/src/user/images/ngcgui.png",
|
|
"src:file:linuxcnc/docs/src/user/images/ngcgui_fr.png",
|
|
"src:file:linuxcnc/docs/src/user/images/qtdragon.png",
|
|
"src:file:linuxcnc/docs/src/user/images/templates/lathe-diagram_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/user/images/templates/mill-diagramm_tmpl.svg",
|
|
"src:file:linuxcnc/docs/src/user/images/tkemc.png",
|
|
"src:file:linuxcnc/docs/src/user/images/tklinuxcnc_fr.png",
|
|
"src:file:linuxcnc/docs/src/user/images/touchy.png",
|
|
"src:file:linuxcnc/docs/src/user/images/touchy_fr.png",
|
|
"src:file:linuxcnc/docs/src/user/images/whatstep1.png",
|
|
"src:file:linuxcnc/docs/src/xhtml11-image.conf",
|
|
"src:file:linuxcnc/docs/src/xhtml11-latexmath.conf",
|
|
"src:file:linuxcnc/docs/src/xhtml11-links.conf",
|
|
"src:file:linuxcnc/docs/src/xhtml11.conf",
|
|
"src:file:linuxcnc/src/.gitignore",
|
|
"src:file:linuxcnc/src/.swish_config",
|
|
"src:file:linuxcnc/src/.vimrc",
|
|
"src:file:linuxcnc/src/CodingStyle",
|
|
"src:file:linuxcnc/src/Makefile",
|
|
"src:file:linuxcnc/src/Makefile.inc",
|
|
"src:file:linuxcnc/src/Makefile.inc.in",
|
|
"src:file:linuxcnc/src/Makefile.modinc",
|
|
"src:file:linuxcnc/src/Makefile.modinc.in",
|
|
"src:file:linuxcnc/src/Submakefile.skel",
|
|
"src:file:linuxcnc/src/autogen.sh",
|
|
"src:file:linuxcnc/src/autom4te.cache/output.0",
|
|
"src:file:linuxcnc/src/autom4te.cache/output.1",
|
|
"src:file:linuxcnc/src/autom4te.cache/requests",
|
|
"src:file:linuxcnc/src/autom4te.cache/traces.0",
|
|
"src:file:linuxcnc/src/autom4te.cache/traces.1",
|
|
"src:file:linuxcnc/src/config.guess",
|
|
"src:file:linuxcnc/src/config.h",
|
|
"src:file:linuxcnc/src/config.h.in",
|
|
"src:file:linuxcnc/src/config.log",
|
|
"src:file:linuxcnc/src/config.status",
|
|
"src:file:linuxcnc/src/config.sub",
|
|
"src:file:linuxcnc/src/configure",
|
|
"src:file:linuxcnc/src/configure.ac",
|
|
"src:file:linuxcnc/src/doxconfig",
|
|
"src:file:linuxcnc/src/emc/Submakefile",
|
|
"src:file:linuxcnc/src/emc/canterp/Submakefile",
|
|
"src:file:linuxcnc/src/emc/ini/Submakefile",
|
|
"src:file:linuxcnc/src/emc/ini/__pycache__/update_ini.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/ini/emcIniFile.cc",
|
|
"src:file:linuxcnc/src/emc/iotask/Submakefile",
|
|
"src:file:linuxcnc/src/emc/kinematics/Submakefile",
|
|
"src:file:linuxcnc/src/emc/kinematics/blend.fig",
|
|
"src:file:linuxcnc/src/emc/kinematics/meson.build",
|
|
"src:file:linuxcnc/src/emc/kinematics/xyzac-trt-kins.c",
|
|
"src:file:linuxcnc/src/emc/kinematics/xyzbc-trt-kins.c",
|
|
"src:file:linuxcnc/src/emc/motion-logger/README",
|
|
"src:file:linuxcnc/src/emc/motion-logger/Submakefile",
|
|
"src:file:linuxcnc/src/emc/motion/.gitignore",
|
|
"src:file:linuxcnc/src/emc/motion/Submakefile",
|
|
"src:file:linuxcnc/src/emc/motion/emcmotglb.c",
|
|
"src:file:linuxcnc/src/emc/motion/homing.dot",
|
|
"src:file:linuxcnc/src/emc/motion/meson.build",
|
|
"src:file:linuxcnc/src/emc/motion/teleop-notes",
|
|
"src:file:linuxcnc/src/emc/nml_intf/Submakefile",
|
|
"src:file:linuxcnc/src/emc/nml_intf/canon_position.cc",
|
|
"src:file:linuxcnc/src/emc/nml_intf/emcglb.c",
|
|
"src:file:linuxcnc/src/emc/nml_intf/meson.build",
|
|
"src:file:linuxcnc/src/emc/pythonplugin/.gitignore",
|
|
"src:file:linuxcnc/src/emc/pythonplugin/README",
|
|
"src:file:linuxcnc/src/emc/pythonplugin/Submakefile",
|
|
"src:file:linuxcnc/src/emc/pythonplugin/meson.build",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/Submakefile",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/interp_array.cc",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/interp_base.cc",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/interp_check.cc",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/interp_inspection.cc",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/meson.build",
|
|
"src:file:linuxcnc/src/emc/rs274ngc/modal_state.cc",
|
|
"src:file:linuxcnc/src/emc/sai/Submakefile",
|
|
"src:file:linuxcnc/src/emc/sai/meson.build",
|
|
"src:file:linuxcnc/src/emc/task/Submakefile",
|
|
"src:file:linuxcnc/src/emc/tooldata/Submakefile",
|
|
"src:file:linuxcnc/src/emc/tp/Submakefile",
|
|
"src:file:linuxcnc/src/emc/tp/meson.build",
|
|
"src:file:linuxcnc/src/emc/usr_intf/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/README",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/TODO",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/etc/axis_big_dro",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/etc/axis_light_background",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/extensions/LICENSE-Togl",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/makeicon.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/axis-remote.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/axis.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/debuglevel.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/hal_manualtoolchange.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/image-to-gcode.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/lintini.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/linuxcnctop.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/mdi.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/teach-in.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/__pycache__/tracking-test.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/haltest.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/mdi.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/axis/scripts/tracking-test.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__init__.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/dialogs.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/getiniinfo.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/gmoccapy.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/icon_theme_helper.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/notification.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/player.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/preferences.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/__pycache__/widgets.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/gmoccapy.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gmoccapy/release_notes.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gremlin/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gremlin/__pycache__/gremlin-runcpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gremlin/__pycache__/gremlin.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gremlin/__pycache__/qt5_graphics.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gremlin/gremlin-run",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/__pycache__/emc_interface.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/__pycache__/gscreen.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/__pycache__/keybindings.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/__pycache__/mdi.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/__pycache__/preferences.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/gscreen.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/gscreen/gscreen2.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/mdro/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/mdro/__pycache__/mdro.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/ADDING_A_MESA_CARD.md",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/build_HAL.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/build_INI.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/data.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/pages.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/pncconf.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/private_data.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/__pycache__/tests.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/a_axis.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/a_motor.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/base.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/dialogs.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/external.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/finished.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/help.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/main_page.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/mesa0.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/mesa1.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/options.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/7i76_map.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/7i77.xcf",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/7i77_map.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/HomeAxisTravel_V2.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/HomeAxisTravel_V3.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/axisdiagram1.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/blank_card.xcf",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-advanced.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-axisconfig.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-axismotor.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-basic.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-extcontrols.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-gui.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-load.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-mesa.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-realtime.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-thcad.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-ubuttons.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/help-welcome.txt",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pncconf-help/lathe_diagram.png",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pport1.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/pport2.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/realtime.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/s_motor.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/screen.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/sserial_tab.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/start.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/thcad.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/ubuttons.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/vcp.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/x_axis.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/x_motor.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/y_axis.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/y_motor.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/z_axis.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pncconf/z_motor.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__init__.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/__init__.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/commands.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/master.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/panelui_validate.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/pyui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/__pycache__/widgets.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/_panelui.ini",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/panelui_spec.ini",
|
|
"src:file:linuxcnc/src/emc/usr_intf/pyui/pyui.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/M190",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/M190cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/pmx485-test.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/qtplasmac-cfg2prefs.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/qtplasmac-materials.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/qtplasmac-plasmac2qt.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtplasmac/__pycache__/qtplasmac_gcode.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtvcp/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/qtvcp/__pycache__/qtvcp.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/TODO",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/__pycache__/build_HAL.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/__pycache__/build_INI.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/__pycache__/import_mach.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/__pycache__/pages.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/__pycache__/stepconf.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisa.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisu.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisv.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisx.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisy.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/axisz.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/base.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/finished.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/halui_page.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/import_mach.py",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/main_page.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/options.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/pport1.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/pport2.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/spindle.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/start.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/thcad.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/stepconf/ubuttons.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/Submakefile",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/emc_interface.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/filechooser.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/hal_interface.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/listing.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/mdi.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/preferences.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/__pycache__/touchy.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/design.notes",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/touchy.glade",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/touchy.gladep",
|
|
"src:file:linuxcnc/src/emc/usr_intf/touchy/touchy.hal.example",
|
|
"src:file:linuxcnc/src/hal/Submakefile",
|
|
"src:file:linuxcnc/src/hal/classicladder/HISTORY.txt",
|
|
"src:file:linuxcnc/src/hal/classicladder/README.txt",
|
|
"src:file:linuxcnc/src/hal/classicladder/Submakefile",
|
|
"src:file:linuxcnc/src/hal/classicladder/configplc",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/IndexedVar_used_in_function.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/example.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/example2.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/example_many_sections.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/example_sequential.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/modbus_rtu_serial.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/projects_examples/test_call_subroutines.clp",
|
|
"src:file:linuxcnc/src/hal/classicladder/zEMC_README.txt",
|
|
"src:file:linuxcnc/src/hal/components/.gitignore",
|
|
"src:file:linuxcnc/src/hal/components/Submakefile",
|
|
"src:file:linuxcnc/src/hal/components/conv.comp.in",
|
|
"src:file:linuxcnc/src/hal/components/mkconv.sh",
|
|
"src:file:linuxcnc/src/hal/components/spindle.h",
|
|
"src:file:linuxcnc/src/hal/components/stylesheet.9",
|
|
"src:file:linuxcnc/src/hal/drivers/.gitignore",
|
|
"src:file:linuxcnc/src/hal/drivers/Submakefile",
|
|
"src:file:linuxcnc/src/hal/drivers/hal_pi_gpio_demo.hal",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/ChangeLog",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/README",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/Submakefile",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/TODO",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/README",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/README.regmap",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-a1.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-a2.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-a3.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-b1.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-b2.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-b3.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-c1.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-c2.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-c3.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-d2.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/case-d3.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/index.html",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/doc/encoder/legend.png",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/firmware/7i43/CPLD/I43CPLD2.JED",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/firmware/7i43/CPLD/I43CPLD4.JED",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/firmware/7i43/CPLD/SOURCE/7I43.ISE",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/firmware/7i43/CPLD/SOURCE/I43CPLD.UCF",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/firmware/7i43/CPLD/SOURCE/I43CPLD.VHD",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/README.adoc",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/__pycache__/modcompile.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/analogue.mod",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/mesa_modbus.c.tmpl",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/mesa_modbus.mod.sample",
|
|
"src:file:linuxcnc/src/hal/drivers/mesa-hostmot2/modbus/relayboard.mod",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/.gitignore",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/pluto_servo.pin",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/pluto_servo.qpf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/pluto_servo.qsf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/pluto_servo.rbf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/pluto_servo.srf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/quad.v",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/register-layout.txt",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/servo.v",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_servo_firmware/wdt.v",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/main.v",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/pluto_step.qpf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/pluto_step.qsf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/pluto_step.rbf",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/register-layout.txt",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/stepgen.v",
|
|
"src:file:linuxcnc/src/hal/drivers/pluto_step_firmware/test_stepgen.v",
|
|
"src:file:linuxcnc/src/hal/drivers/rbf2h.py",
|
|
"src:file:linuxcnc/src/hal/meson.build",
|
|
"src:file:linuxcnc/src/hal/user_comps/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/gladevcp.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/hal_input.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/mitsub_vfd.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/mqtt-publisher.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/pmx485.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/pyvcp.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/scorbot-er-3.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/sim-torch.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/__pycache__/z_level_compensation.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/huanyang-vfd/README.md",
|
|
"src:file:linuxcnc/src/hal/user_comps/huanyang-vfd/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/huanyang-vfd/config-files/custom.hal",
|
|
"src:file:linuxcnc/src/hal/user_comps/huanyang-vfd/config-files/custom_postgui.hal",
|
|
"src:file:linuxcnc/src/hal/user_comps/huanyang-vfd/config-files/panel.xml",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/LogBook.txt",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/examples/mb2hal_example_01_arduino.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/examples/mb2hal_example_01_arduino/mb2hal_example_01_arduino.ino",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/mb2hal_HOWTO.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/tests/mb2hal_test_01.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/tests/mb2hal_test_02.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/tests/mb2hal_test_03.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/mb2hal/tests/mb2hal_test_04.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/pi500_vfd/.gitignore",
|
|
"src:file:linuxcnc/src/hal/user_comps/pi500_vfd/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/pi500_vfd/pi500_vfd.1",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfdb_vfd/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/dump-params.mio",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11-all-options.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11-rs232.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11-rs485.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11-tcp-client.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11-tcp-server.ini",
|
|
"src:file:linuxcnc/src/hal/user_comps/vfs11_vfd/vfs11_vfd.hal",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/5axisgui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/hbmgui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/hexagui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/lineardelta.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/maho600gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/max5gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/melfagui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/millturngui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/puma560gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/pumagui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/rotarydelta.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/scaragui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/xyzab-tdr-gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/xyzac-trt-gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/__pycache__/xyzbc-trt-gui.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/hexagui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/melfagui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/puma560gui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/pumagui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/scaragui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/xyzac-trt-gui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/vismach/xyzbc-trt-gui.py",
|
|
"src:file:linuxcnc/src/hal/user_comps/wj200_vfd/.gitignore",
|
|
"src:file:linuxcnc/src/hal/user_comps/wj200_vfd/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/wj200_vfd/wj200_vfd.1",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/README.md",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/Submakefile",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/buttons-layout-diagram.txt",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/components-diagram-hal-mode.txt",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/components-diagram-simulation-mode.txt",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/display-layout-diagram.txt",
|
|
"src:file:linuxcnc/src/hal/user_comps/xhc-whb04b-6/example-configuration.md",
|
|
"src:file:linuxcnc/src/hal/utils/.gitignore",
|
|
"src:file:linuxcnc/src/hal/utils/Submakefile",
|
|
"src:file:linuxcnc/src/hal/utils/__pycache__/elbpcom.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/hal/utils/halcompile.g",
|
|
"src:file:linuxcnc/src/install-sh",
|
|
"src:file:linuxcnc/src/libnml/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/buffer/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/buffer/locmem.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/locmem.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/memsem.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/memsem.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/phantom.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/phantom.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/physmem.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/physmem.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/recvn.c",
|
|
"src:file:linuxcnc/src/libnml/buffer/recvn.h",
|
|
"src:file:linuxcnc/src/libnml/buffer/rem_msg.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/sendn.c",
|
|
"src:file:linuxcnc/src/libnml/buffer/sendn.h",
|
|
"src:file:linuxcnc/src/libnml/buffer/shmem.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/shmem.hh",
|
|
"src:file:linuxcnc/src/libnml/buffer/tcpmem.cc",
|
|
"src:file:linuxcnc/src/libnml/buffer/tcpmem.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/cms/cms.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_aup.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_aup.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_cfg.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_cfg.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_dup.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_dup.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_in.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_pm.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_srv.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_srv.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_up.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_up.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_user.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_xup.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cms_xup.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cmsdiag.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/cmsdiag.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/cmssvrp.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/tcp_opts.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/tcp_opts.hh",
|
|
"src:file:linuxcnc/src/libnml/cms/tcp_srv.cc",
|
|
"src:file:linuxcnc/src/libnml/cms/tcp_srv.hh",
|
|
"src:file:linuxcnc/src/libnml/inifile/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/inifile/inifile.cc",
|
|
"src:file:linuxcnc/src/libnml/inifile/inifile.h",
|
|
"src:file:linuxcnc/src/libnml/inifile/inifile.hh",
|
|
"src:file:linuxcnc/src/libnml/inifile/inivar.cc",
|
|
"src:file:linuxcnc/src/libnml/inifile/meson.build",
|
|
"src:file:linuxcnc/src/libnml/linklist/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/linklist/linklist.cc",
|
|
"src:file:linuxcnc/src/libnml/linklist/linklist.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/nml/cmd_msg.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/cmd_msg.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/meson.build",
|
|
"src:file:linuxcnc/src/libnml/nml/nml.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/nml.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/nml_oi.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/nml_oi.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/nml_srv.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/nml_srv.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/nml_type.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/nmldiag.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/nmldiag.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/nmlmsg.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/nmlmsg.hh",
|
|
"src:file:linuxcnc/src/libnml/nml/stat_msg.cc",
|
|
"src:file:linuxcnc/src/libnml/nml/stat_msg.hh",
|
|
"src:file:linuxcnc/src/libnml/os_intf/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_sem.c",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_sem.h",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_shm.c",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_shm.h",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_timer.c",
|
|
"src:file:linuxcnc/src/libnml/os_intf/_timer.h",
|
|
"src:file:linuxcnc/src/libnml/os_intf/inetfile.hh",
|
|
"src:file:linuxcnc/src/libnml/os_intf/inetnull.cc",
|
|
"src:file:linuxcnc/src/libnml/os_intf/sem.cc",
|
|
"src:file:linuxcnc/src/libnml/os_intf/sem.hh",
|
|
"src:file:linuxcnc/src/libnml/os_intf/shm.cc",
|
|
"src:file:linuxcnc/src/libnml/os_intf/shm.hh",
|
|
"src:file:linuxcnc/src/libnml/os_intf/timer.cc",
|
|
"src:file:linuxcnc/src/libnml/os_intf/timer.hh",
|
|
"src:file:linuxcnc/src/libnml/posemath/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/posemath/_posemath.c",
|
|
"src:file:linuxcnc/src/libnml/posemath/gomath.c",
|
|
"src:file:linuxcnc/src/libnml/posemath/gomath.h",
|
|
"src:file:linuxcnc/src/libnml/posemath/gotypes.h",
|
|
"src:file:linuxcnc/src/libnml/posemath/meson.build",
|
|
"src:file:linuxcnc/src/libnml/posemath/posemath.cc",
|
|
"src:file:linuxcnc/src/libnml/posemath/posemath.h",
|
|
"src:file:linuxcnc/src/libnml/posemath/sincos.c",
|
|
"src:file:linuxcnc/src/libnml/posemath/sincos.h",
|
|
"src:file:linuxcnc/src/libnml/rcs/Submakefile",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcs.hh",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcs_exit.cc",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcs_exit.hh",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcs_print.cc",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcs_print.hh",
|
|
"src:file:linuxcnc/src/libnml/rcs/rcsversion.h",
|
|
"src:file:linuxcnc/src/libnml/read.me",
|
|
"src:file:linuxcnc/src/m4/ax_boost_base.m4",
|
|
"src:file:linuxcnc/src/m4/ax_boost_python.m4",
|
|
"src:file:linuxcnc/src/m4/ax_cxx_compile_stdcxx.m4",
|
|
"src:file:linuxcnc/src/m4/ax_cxx_compile_stdcxx_17.m4",
|
|
"src:file:linuxcnc/src/m4/ax_python.m4",
|
|
"src:file:linuxcnc/src/m4/ax_python_devel.m4",
|
|
"src:file:linuxcnc/src/m4/ax_require_defined.m4",
|
|
"src:file:linuxcnc/src/meson.build",
|
|
"src:file:linuxcnc/src/modsilent.py",
|
|
"src:file:linuxcnc/src/module_helper/Submakefile",
|
|
"src:file:linuxcnc/src/module_helper/module_helper.c",
|
|
"src:file:linuxcnc/src/module_helper/tests",
|
|
"src:file:linuxcnc/src/move-if-change",
|
|
"src:file:linuxcnc/src/objects/5axiskins.sym",
|
|
"src:file:linuxcnc/src/objects/5axiskins.tmp",
|
|
"src:file:linuxcnc/src/objects/5axiskins.ver",
|
|
"src:file:linuxcnc/src/objects/abs.sym",
|
|
"src:file:linuxcnc/src/objects/abs.tmp",
|
|
"src:file:linuxcnc/src/objects/abs.ver",
|
|
"src:file:linuxcnc/src/objects/abs_s32.sym",
|
|
"src:file:linuxcnc/src/objects/abs_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/abs_s32.ver",
|
|
"src:file:linuxcnc/src/objects/abs_s64.sym",
|
|
"src:file:linuxcnc/src/objects/abs_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/abs_s64.ver",
|
|
"src:file:linuxcnc/src/objects/and2.sym",
|
|
"src:file:linuxcnc/src/objects/and2.tmp",
|
|
"src:file:linuxcnc/src/objects/and2.ver",
|
|
"src:file:linuxcnc/src/objects/anglejog.sym",
|
|
"src:file:linuxcnc/src/objects/anglejog.tmp",
|
|
"src:file:linuxcnc/src/objects/anglejog.ver",
|
|
"src:file:linuxcnc/src/objects/axistest.sym",
|
|
"src:file:linuxcnc/src/objects/axistest.tmp",
|
|
"src:file:linuxcnc/src/objects/axistest.ver",
|
|
"src:file:linuxcnc/src/objects/bg.msg",
|
|
"src:file:linuxcnc/src/objects/bin2gray.sym",
|
|
"src:file:linuxcnc/src/objects/bin2gray.tmp",
|
|
"src:file:linuxcnc/src/objects/bin2gray.ver",
|
|
"src:file:linuxcnc/src/objects/biquad.sym",
|
|
"src:file:linuxcnc/src/objects/biquad.tmp",
|
|
"src:file:linuxcnc/src/objects/biquad.ver",
|
|
"src:file:linuxcnc/src/objects/bitslice.sym",
|
|
"src:file:linuxcnc/src/objects/bitslice.tmp",
|
|
"src:file:linuxcnc/src/objects/bitslice.ver",
|
|
"src:file:linuxcnc/src/objects/bitwise.sym",
|
|
"src:file:linuxcnc/src/objects/bitwise.tmp",
|
|
"src:file:linuxcnc/src/objects/bitwise.ver",
|
|
"src:file:linuxcnc/src/objects/bldc.sym",
|
|
"src:file:linuxcnc/src/objects/bldc.tmp",
|
|
"src:file:linuxcnc/src/objects/bldc.ver",
|
|
"src:file:linuxcnc/src/objects/blend.sym",
|
|
"src:file:linuxcnc/src/objects/blend.tmp",
|
|
"src:file:linuxcnc/src/objects/blend.ver",
|
|
"src:file:linuxcnc/src/objects/boss_plc.sym",
|
|
"src:file:linuxcnc/src/objects/boss_plc.tmp",
|
|
"src:file:linuxcnc/src/objects/boss_plc.ver",
|
|
"src:file:linuxcnc/src/objects/carousel.sym",
|
|
"src:file:linuxcnc/src/objects/carousel.tmp",
|
|
"src:file:linuxcnc/src/objects/carousel.ver",
|
|
"src:file:linuxcnc/src/objects/charge_pump.sym",
|
|
"src:file:linuxcnc/src/objects/charge_pump.tmp",
|
|
"src:file:linuxcnc/src/objects/charge_pump.ver",
|
|
"src:file:linuxcnc/src/objects/clarke2.sym",
|
|
"src:file:linuxcnc/src/objects/clarke2.tmp",
|
|
"src:file:linuxcnc/src/objects/clarke2.ver",
|
|
"src:file:linuxcnc/src/objects/clarke3.sym",
|
|
"src:file:linuxcnc/src/objects/clarke3.tmp",
|
|
"src:file:linuxcnc/src/objects/clarke3.ver",
|
|
"src:file:linuxcnc/src/objects/clarkeinv.sym",
|
|
"src:file:linuxcnc/src/objects/clarkeinv.tmp",
|
|
"src:file:linuxcnc/src/objects/clarkeinv.ver",
|
|
"src:file:linuxcnc/src/objects/classicladder_rt.sym",
|
|
"src:file:linuxcnc/src/objects/classicladder_rt.tmp",
|
|
"src:file:linuxcnc/src/objects/classicladder_rt.ver",
|
|
"src:file:linuxcnc/src/objects/comp.sym",
|
|
"src:file:linuxcnc/src/objects/comp.tmp",
|
|
"src:file:linuxcnc/src/objects/comp.ver",
|
|
"src:file:linuxcnc/src/objects/constant.sym",
|
|
"src:file:linuxcnc/src/objects/constant.tmp",
|
|
"src:file:linuxcnc/src/objects/constant.ver",
|
|
"src:file:linuxcnc/src/objects/conv_bit_float.sym",
|
|
"src:file:linuxcnc/src/objects/conv_bit_float.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_bit_float.ver",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_bit_s64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_bit_u64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_float_s32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_float_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_float_s32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_float_s64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_float_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_float_s64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_float_u32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_float_u32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_float_u32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_float_u64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_float_u64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_float_u64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s32_bit.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s32_bit.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s32_bit.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s32_float.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s32_float.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s32_float.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s32_s64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s32_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s32_s64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s32_u64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s64_bit.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s64_bit.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s64_bit.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s64_float.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s64_float.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s64_float.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s64_s32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s64_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s64_s32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_s64_u64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u32_bit.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u32_bit.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u32_bit.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u32_float.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u32_float.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u32_float.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u32_s64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u32_u64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u32_u64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u32_u64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u64_bit.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u64_bit.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u64_bit.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u64_float.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u64_float.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u64_float.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s32.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s64.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s64.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u64_s64.ver",
|
|
"src:file:linuxcnc/src/objects/conv_u64_u32.sym",
|
|
"src:file:linuxcnc/src/objects/conv_u64_u32.tmp",
|
|
"src:file:linuxcnc/src/objects/conv_u64_u32.ver",
|
|
"src:file:linuxcnc/src/objects/corexy_by_hal.sym",
|
|
"src:file:linuxcnc/src/objects/corexy_by_hal.tmp",
|
|
"src:file:linuxcnc/src/objects/corexy_by_hal.ver",
|
|
"src:file:linuxcnc/src/objects/corexykins.sym",
|
|
"src:file:linuxcnc/src/objects/corexykins.tmp",
|
|
"src:file:linuxcnc/src/objects/corexykins.ver",
|
|
"src:file:linuxcnc/src/objects/counter.sym",
|
|
"src:file:linuxcnc/src/objects/counter.tmp",
|
|
"src:file:linuxcnc/src/objects/counter.ver",
|
|
"src:file:linuxcnc/src/objects/cs.msg",
|
|
"src:file:linuxcnc/src/objects/da.msg",
|
|
"src:file:linuxcnc/src/objects/dbounce.sym",
|
|
"src:file:linuxcnc/src/objects/dbounce.tmp",
|
|
"src:file:linuxcnc/src/objects/dbounce.ver",
|
|
"src:file:linuxcnc/src/objects/ddt.sym",
|
|
"src:file:linuxcnc/src/objects/ddt.tmp",
|
|
"src:file:linuxcnc/src/objects/ddt.ver",
|
|
"src:file:linuxcnc/src/objects/de.msg",
|
|
"src:file:linuxcnc/src/objects/deadzone.sym",
|
|
"src:file:linuxcnc/src/objects/deadzone.tmp",
|
|
"src:file:linuxcnc/src/objects/deadzone.ver",
|
|
"src:file:linuxcnc/src/objects/debounce.sym",
|
|
"src:file:linuxcnc/src/objects/debounce.tmp",
|
|
"src:file:linuxcnc/src/objects/debounce.ver",
|
|
"src:file:linuxcnc/src/objects/demux.sym",
|
|
"src:file:linuxcnc/src/objects/demux.tmp",
|
|
"src:file:linuxcnc/src/objects/demux.ver",
|
|
"src:file:linuxcnc/src/objects/differential.sym",
|
|
"src:file:linuxcnc/src/objects/differential.tmp",
|
|
"src:file:linuxcnc/src/objects/differential.ver",
|
|
"src:file:linuxcnc/src/objects/div2.sym",
|
|
"src:file:linuxcnc/src/objects/div2.tmp",
|
|
"src:file:linuxcnc/src/objects/div2.ver",
|
|
"src:file:linuxcnc/src/objects/edge.sym",
|
|
"src:file:linuxcnc/src/objects/edge.tmp",
|
|
"src:file:linuxcnc/src/objects/edge.ver",
|
|
"src:file:linuxcnc/src/objects/emc/canterp/canterp.d",
|
|
"src:file:linuxcnc/src/objects/emc/canterp/canterp.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/emcIniFile.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/emcIniFile.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/iniaxis.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/iniaxis.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inihal.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inihal.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inijoint.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inijoint.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inispindle.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/inispindle.o",
|
|
"src:file:linuxcnc/src/objects/emc/ini/initraj.d",
|
|
"src:file:linuxcnc/src/objects/emc/ini/initraj.o",
|
|
"src:file:linuxcnc/src/objects/emc/iotask/ioControl.d",
|
|
"src:file:linuxcnc/src/objects/emc/iotask/ioControl.o",
|
|
"src:file:linuxcnc/src/objects/emc/iotask/ioControl_v2.d",
|
|
"src:file:linuxcnc/src/objects/emc/iotask/ioControl_v2.o",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/genserfuncs.d",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/genserfuncs.o",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/lineardeltakins.d",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/lineardeltakins.o",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/rotarydeltakins.d",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/rotarydeltakins.o",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/ugenserkins.d",
|
|
"src:file:linuxcnc/src/objects/emc/kinematics/ugenserkins.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion-logger/motion-logger.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion-logger/motion-logger.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/axis.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/axis.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/dbuf.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/dbuf.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/emcmotglb.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/emcmotglb.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/emcmotutil.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/emcmotutil.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/simple_tp.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/simple_tp.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/stashf.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/stashf.o",
|
|
"src:file:linuxcnc/src/objects/emc/motion/usrmotintf.d",
|
|
"src:file:linuxcnc/src/objects/emc/motion/usrmotintf.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/canon_position.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/canon_position.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emc.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emc.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcargs.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcargs.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcglb.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcglb.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcops.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcops.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcpose.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/emcpose.o",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/interpl.d",
|
|
"src:file:linuxcnc/src/objects/emc/nml_intf/interpl.o",
|
|
"src:file:linuxcnc/src/objects/emc/pythonplugin/python_plugin.d",
|
|
"src:file:linuxcnc/src/objects/emc/pythonplugin/python_plugin.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/canonmodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/canonmodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/gcodemodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/gcodemodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_arc.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_arc.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_array.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_array.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_base.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_base.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_check.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_check.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_convert.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_convert.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_cycles.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_cycles.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_execute.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_execute.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_find.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_find.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_g7x.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_g7x.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_inspection.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_inspection.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_internal.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_internal.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_inverse.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_inverse.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_namedparams.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_namedparams.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_o_word.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_o_word.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_python.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_python.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_queue.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_queue.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_read.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_read.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_remap.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_remap.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_setup.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_setup.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_write.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interp_write.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interpmodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/interpmodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/modal_state.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/modal_state.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/nurbs_additional_functions.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/nurbs_additional_functions.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyarrays.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyarrays.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyblock.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyblock.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyemctypes.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyemctypes.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyinterp1.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyinterp1.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyparamclass.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/pyparamclass.o",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/rs274ngc_pre.d",
|
|
"src:file:linuxcnc/src/objects/emc/rs274ngc/rs274ngc_pre.o",
|
|
"src:file:linuxcnc/src/objects/emc/sai/driver.d",
|
|
"src:file:linuxcnc/src/objects/emc/sai/driver.o",
|
|
"src:file:linuxcnc/src/objects/emc/sai/dummyemcstat.d",
|
|
"src:file:linuxcnc/src/objects/emc/sai/dummyemcstat.o",
|
|
"src:file:linuxcnc/src/objects/emc/sai/saicanon.d",
|
|
"src:file:linuxcnc/src/objects/emc/sai/saicanon.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/backtrace.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/backtrace.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/emccanon.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/emccanon.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/emcsvr.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/emcsvr.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/emctask.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/emctask.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/emctaskmain.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/emctaskmain.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskclass.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskclass.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskintf.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskintf.o",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskmodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/task/taskmodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_common.d",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_common.o",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_db.d",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_db.o",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_mmap.d",
|
|
"src:file:linuxcnc/src/objects/emc/tooldata/tooldata_mmap.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/axis/extensions/_toglmodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/axis/extensions/_toglmodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/axis/extensions/emcmodule.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/axis/extensions/emcmodule.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emclcd.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emclcd.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcrsh.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcrsh.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcsched.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcsched.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcsh.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/emcsh.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/halui.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/halui.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/schedrmt.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/schedrmt.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/shcom.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/shcom.o",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/sockets.d",
|
|
"src:file:linuxcnc/src/objects/emc/usr_intf/sockets.o",
|
|
"src:file:linuxcnc/src/objects/encoder.sym",
|
|
"src:file:linuxcnc/src/objects/encoder.tmp",
|
|
"src:file:linuxcnc/src/objects/encoder.ver",
|
|
"src:file:linuxcnc/src/objects/encoder_ratio.sym",
|
|
"src:file:linuxcnc/src/objects/encoder_ratio.tmp",
|
|
"src:file:linuxcnc/src/objects/encoder_ratio.ver",
|
|
"src:file:linuxcnc/src/objects/enum.sym",
|
|
"src:file:linuxcnc/src/objects/enum.tmp",
|
|
"src:file:linuxcnc/src/objects/enum.ver",
|
|
"src:file:linuxcnc/src/objects/eoffset_per_angle.sym",
|
|
"src:file:linuxcnc/src/objects/eoffset_per_angle.tmp",
|
|
"src:file:linuxcnc/src/objects/eoffset_per_angle.ver",
|
|
"src:file:linuxcnc/src/objects/es.msg",
|
|
"src:file:linuxcnc/src/objects/estop_latch.sym",
|
|
"src:file:linuxcnc/src/objects/estop_latch.tmp",
|
|
"src:file:linuxcnc/src/objects/estop_latch.ver",
|
|
"src:file:linuxcnc/src/objects/feedcomp.sym",
|
|
"src:file:linuxcnc/src/objects/feedcomp.tmp",
|
|
"src:file:linuxcnc/src/objects/feedcomp.ver",
|
|
"src:file:linuxcnc/src/objects/fi.msg",
|
|
"src:file:linuxcnc/src/objects/filter_kalman.sym",
|
|
"src:file:linuxcnc/src/objects/filter_kalman.tmp",
|
|
"src:file:linuxcnc/src/objects/filter_kalman.ver",
|
|
"src:file:linuxcnc/src/objects/flipflop.sym",
|
|
"src:file:linuxcnc/src/objects/flipflop.tmp",
|
|
"src:file:linuxcnc/src/objects/flipflop.ver",
|
|
"src:file:linuxcnc/src/objects/fr.msg",
|
|
"src:file:linuxcnc/src/objects/gantry.sym",
|
|
"src:file:linuxcnc/src/objects/gantry.tmp",
|
|
"src:file:linuxcnc/src/objects/gantry.ver",
|
|
"src:file:linuxcnc/src/objects/gearchange.sym",
|
|
"src:file:linuxcnc/src/objects/gearchange.tmp",
|
|
"src:file:linuxcnc/src/objects/gearchange.ver",
|
|
"src:file:linuxcnc/src/objects/genhexkins.sym",
|
|
"src:file:linuxcnc/src/objects/genhexkins.tmp",
|
|
"src:file:linuxcnc/src/objects/genhexkins.ver",
|
|
"src:file:linuxcnc/src/objects/genserkins.sym",
|
|
"src:file:linuxcnc/src/objects/genserkins.tmp",
|
|
"src:file:linuxcnc/src/objects/genserkins.ver",
|
|
"src:file:linuxcnc/src/objects/gray2bin.sym",
|
|
"src:file:linuxcnc/src/objects/gray2bin.tmp",
|
|
"src:file:linuxcnc/src/objects/gray2bin.ver",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/arithm_eval.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/arithm_eval.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/arrays.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/arrays.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/calc.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/calc.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/calc_sequential.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/calc_sequential.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/classicladder.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/classicladder.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/classicladder_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/classicladder_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/config_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/config_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/drawing.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/drawing.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/drawing_sequential.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/drawing_sequential.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_copy.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_copy.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_sequential.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/edit_sequential.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/editproperties_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/editproperties_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/emc_mods.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/emc_mods.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files_project.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files_project.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files_sequential.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/files_sequential.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/manager.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/manager.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/manager_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/manager_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/menu_and_toolbar_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/menu_and_toolbar_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/print_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/print_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/protocol_modbus_master.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/protocol_modbus_master.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/protocol_modbus_slave.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/protocol_modbus_slave.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/serial_linux.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/serial_linux.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/socket_modbus_master.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/socket_modbus_master.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/socket_server.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/socket_server.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/spy_vars_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/spy_vars_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/symbols.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/symbols.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/symbols_gtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/symbols_gtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/vars_access.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/vars_access.o",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/vars_names.d",
|
|
"src:file:linuxcnc/src/objects/hal/classicladder/vars_names.o",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/abs_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/and2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/and2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/anglejog.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/anglejog.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/axistest.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/axistest.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/bin2gray.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/bin2gray.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/biquad.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/biquad.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/bitslice.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/bitslice.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/bitwise.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/bitwise.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/bldc.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/bldc.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/blend.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/blend.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/carousel.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/carousel.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/charge_pump.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/charge_pump.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarke2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarke2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarke3.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarke3.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarkeinv.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/clarkeinv.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/comp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/comp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/constant.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/constant.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_u32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_u32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_u64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_bit_u64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_u32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_u32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_u64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_float_u64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_bit.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_bit.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_u32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_u32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_u64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s32_u64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_bit.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_bit.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_u32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_u32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_u64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_s64_u64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_bit.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_bit.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_u64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u32_u64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_bit.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_bit.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_s32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_s32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_s64.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_s64.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_u32.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/conv_u64_u32.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/corexy_by_hal.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/corexy_by_hal.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/dbounce.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/dbounce.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/ddt.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/ddt.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/deadzone.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/deadzone.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/demux.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/demux.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/differential.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/differential.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/div2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/div2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/edge.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/edge.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/eoffset_per_angle.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/eoffset_per_angle.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/estop_latch.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/estop_latch.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/feedcomp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/feedcomp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/filter_kalman.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/filter_kalman.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/flipflop.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/flipflop.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/gantry.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/gantry.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/gearchange.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/gearchange.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/gray2bin.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/gray2bin.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/histobins.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/histobins.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/homecomp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/homecomp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/hypot.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/hypot.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/ilowpass.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/ilowpass.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/integ.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/integ.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/invert.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/invert.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/joyhandle.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/joyhandle.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/knob2float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/knob2float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/laserpower.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/laserpower.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/latencybins.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/latencybins.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/led_dim.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/led_dim.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit1.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit1.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit3.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit3.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit_axis.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/limit_axis.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/lincurve.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/lincurve.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/logic.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/logic.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/lowpass.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/lowpass.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/lut5.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/lut5.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/maj3.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/maj3.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/match8.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/match8.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/matrixkins.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/matrixkins.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/max31855.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/max31855.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mesa_pktgyro_test.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mesa_pktgyro_test.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/message.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/message.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/millturn.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/millturn.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/minmax.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/minmax.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/moveoff.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/moveoff.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mult2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mult2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/multiclick.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/multiclick.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/multiswitch.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/multiswitch.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux16.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux16.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux4.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux4.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux8.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/mux8.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/near.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/near.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/not.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/not.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/offset.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/offset.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/ohmic.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/ohmic.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/oneshot.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/oneshot.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/or2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/or2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/orient.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/orient.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/panelui.d",
|
|
"src:file:linuxcnc/src/objects/hal/components/panelui.o",
|
|
"src:file:linuxcnc/src/objects/hal/components/plasmac.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/plasmac.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/raster.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/raster.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/reset.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/reset.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/safety_latch.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/safety_latch.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sample_hold.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sample_hold.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sampler_usr.d",
|
|
"src:file:linuxcnc/src/objects/hal/components/sampler_usr.o",
|
|
"src:file:linuxcnc/src/objects/hal/components/scale.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/scale.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/scaled_s32_sums.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/scaled_s32_sums.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/select8.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/select8.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_axis_hardware.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_axis_hardware.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_home_switch.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_home_switch.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_matrix_kb.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_matrix_kb.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_parport.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_parport.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_spindle.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sim_spindle.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/simple_tp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/simple_tp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/sphereprobe.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sphereprobe.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/spindle.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/spindle.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/spindle_monitor.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/spindle_monitor.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/steptest.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/steptest.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/streamer_usr.d",
|
|
"src:file:linuxcnc/src/objects/hal/components/streamer_usr.o",
|
|
"src:file:linuxcnc/src/objects/hal/components/sum2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/sum2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/thc.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/thc.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/thcud.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/thcud.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/threadtest.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/threadtest.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/time.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/time.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/timedelay.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/timedelay.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/timedelta.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/timedelta.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/tof.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/tof.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/toggle.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/toggle.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/toggle2nist.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/toggle2nist.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/ton.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/ton.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/tp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/tp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/tristate_bit.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/tristate_bit.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/tristate_float.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/tristate_float.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/updown.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/updown.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/userkins.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/userkins.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/wcomp.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/wcomp.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/xhc_hb04_util.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/xhc_hb04_util.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/xor2.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/xor2.mak",
|
|
"src:file:linuxcnc/src/objects/hal/components/xyzab_tdr_kins.c",
|
|
"src:file:linuxcnc/src/objects/hal/components/xyzab_tdr_kins.mak",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/mesa_7i65.c",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/mesa_7i65.mak",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/mesa_uart.c",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/mesa_uart.mak",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/serport.c",
|
|
"src:file:linuxcnc/src/objects/hal/drivers/serport.mak",
|
|
"src:file:linuxcnc/src/objects/hal/hal_lib.d",
|
|
"src:file:linuxcnc/src/objects/hal/hal_lib.o",
|
|
"src:file:linuxcnc/src/objects/hal/halmodule.d",
|
|
"src:file:linuxcnc/src/objects/hal/halmodule.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/gs2_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/gs2_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/huanyang-vfd/hy_comm.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/huanyang-vfd/hy_comm.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/huanyang-vfd/hy_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/huanyang-vfd/hy_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/hy_gt_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/hy_gt_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_hal.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_hal.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_init.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_init.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_modbus.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/mb2hal/mb2hal_modbus.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/pi500_vfd/pi500_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/pi500_vfd/pi500_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/sendkeys.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/sendkeys.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/shuttle.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/shuttle.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/svd-ps_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/svd-ps_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/thermistor.c",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/vfdb_vfd/vfdb_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/vfdb_vfd/vfdb_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/vfs11_vfd/vfs11_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/vfs11_vfd/vfs11_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/wj200_vfd/wj200_vfd.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/wj200_vfd/wj200_vfd.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-hb04.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-hb04.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/hal.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/hal.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/main.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/main.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/pendant-types.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/pendant-types.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/pendant.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/pendant.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/usb.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/usb.o",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/xhc-whb04b6.d",
|
|
"src:file:linuxcnc/src/objects/hal/user_comps/xhc-whb04b-6/xhc-whb04b6.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/__pycache__/halcompile.cpython-312.pyc",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_commands.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_commands.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_completion.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_completion.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_main.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcmd_main.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halcompile.py",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halrmt.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halrmt.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halsh.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/halsh.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/meter.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/meter.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/miscgtk.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/miscgtk.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_disp.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_disp.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_files.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_files.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_horiz.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_horiz.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_trig.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_trig.o",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_vert.d",
|
|
"src:file:linuxcnc/src/objects/hal/utils/scope_vert.o",
|
|
"src:file:linuxcnc/src/objects/hal_bb_gpio.sym",
|
|
"src:file:linuxcnc/src/objects/hal_bb_gpio.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_bb_gpio.ver",
|
|
"src:file:linuxcnc/src/objects/hal_gm.sym",
|
|
"src:file:linuxcnc/src/objects/hal_gm.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_gm.ver",
|
|
"src:file:linuxcnc/src/objects/hal_gpio.sym",
|
|
"src:file:linuxcnc/src/objects/hal_gpio.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_gpio.ver",
|
|
"src:file:linuxcnc/src/objects/hal_lib.sym",
|
|
"src:file:linuxcnc/src/objects/hal_lib.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_lib.ver",
|
|
"src:file:linuxcnc/src/objects/hal_parport.sym",
|
|
"src:file:linuxcnc/src/objects/hal_parport.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_parport.ver",
|
|
"src:file:linuxcnc/src/objects/hal_pi_gpio.sym",
|
|
"src:file:linuxcnc/src/objects/hal_pi_gpio.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_pi_gpio.ver",
|
|
"src:file:linuxcnc/src/objects/hal_ppmc.sym",
|
|
"src:file:linuxcnc/src/objects/hal_ppmc.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_ppmc.ver",
|
|
"src:file:linuxcnc/src/objects/hal_speaker.sym",
|
|
"src:file:linuxcnc/src/objects/hal_speaker.tmp",
|
|
"src:file:linuxcnc/src/objects/hal_speaker.ver",
|
|
"src:file:linuxcnc/src/objects/histobins.sym",
|
|
"src:file:linuxcnc/src/objects/histobins.tmp",
|
|
"src:file:linuxcnc/src/objects/histobins.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_7i43.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_7i43.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_7i43.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_7i90.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_7i90.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_7i90.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_eth.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_eth.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_eth.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_pci.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_pci.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_pci.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_rpspi.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_rpspi.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_rpspi.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_spi.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_spi.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_spi.ver",
|
|
"src:file:linuxcnc/src/objects/hm2_test.sym",
|
|
"src:file:linuxcnc/src/objects/hm2_test.tmp",
|
|
"src:file:linuxcnc/src/objects/hm2_test.ver",
|
|
"src:file:linuxcnc/src/objects/homecomp.sym",
|
|
"src:file:linuxcnc/src/objects/homecomp.tmp",
|
|
"src:file:linuxcnc/src/objects/homecomp.ver",
|
|
"src:file:linuxcnc/src/objects/homemod.sym",
|
|
"src:file:linuxcnc/src/objects/homemod.tmp",
|
|
"src:file:linuxcnc/src/objects/homemod.ver",
|
|
"src:file:linuxcnc/src/objects/hostmot2.sym",
|
|
"src:file:linuxcnc/src/objects/hostmot2.tmp",
|
|
"src:file:linuxcnc/src/objects/hostmot2.ver",
|
|
"src:file:linuxcnc/src/objects/hu.msg",
|
|
"src:file:linuxcnc/src/objects/hypot.sym",
|
|
"src:file:linuxcnc/src/objects/hypot.tmp",
|
|
"src:file:linuxcnc/src/objects/hypot.ver",
|
|
"src:file:linuxcnc/src/objects/ilowpass.sym",
|
|
"src:file:linuxcnc/src/objects/ilowpass.tmp",
|
|
"src:file:linuxcnc/src/objects/ilowpass.ver",
|
|
"src:file:linuxcnc/src/objects/integ.sym",
|
|
"src:file:linuxcnc/src/objects/integ.tmp",
|
|
"src:file:linuxcnc/src/objects/integ.ver",
|
|
"src:file:linuxcnc/src/objects/invert.sym",
|
|
"src:file:linuxcnc/src/objects/invert.tmp",
|
|
"src:file:linuxcnc/src/objects/invert.ver",
|
|
"src:file:linuxcnc/src/objects/it.msg",
|
|
"src:file:linuxcnc/src/objects/ja.msg",
|
|
"src:file:linuxcnc/src/objects/joyhandle.sym",
|
|
"src:file:linuxcnc/src/objects/joyhandle.tmp",
|
|
"src:file:linuxcnc/src/objects/joyhandle.ver",
|
|
"src:file:linuxcnc/src/objects/knob2float.sym",
|
|
"src:file:linuxcnc/src/objects/knob2float.tmp",
|
|
"src:file:linuxcnc/src/objects/knob2float.ver",
|
|
"src:file:linuxcnc/src/objects/laserpower.sym",
|
|
"src:file:linuxcnc/src/objects/laserpower.tmp",
|
|
"src:file:linuxcnc/src/objects/laserpower.ver",
|
|
"src:file:linuxcnc/src/objects/latencybins.sym",
|
|
"src:file:linuxcnc/src/objects/latencybins.tmp",
|
|
"src:file:linuxcnc/src/objects/latencybins.ver",
|
|
"src:file:linuxcnc/src/objects/lcd.sym",
|
|
"src:file:linuxcnc/src/objects/lcd.tmp",
|
|
"src:file:linuxcnc/src/objects/lcd.ver",
|
|
"src:file:linuxcnc/src/objects/led_dim.sym",
|
|
"src:file:linuxcnc/src/objects/led_dim.tmp",
|
|
"src:file:linuxcnc/src/objects/led_dim.ver",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/locmem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/locmem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/memsem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/memsem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/phantom.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/phantom.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/physmem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/physmem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/recvn.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/recvn.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/sendn.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/sendn.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/shmem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/shmem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/tcpmem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/buffer/tcpmem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_aup.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_aup.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_cfg.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_cfg.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_dup.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_dup.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_in.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_in.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_pm.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_pm.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_srv.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_srv.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_up.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_up.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_xup.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cms_xup.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cmsdiag.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/cmsdiag.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/tcp_opts.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/tcp_opts.o",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/tcp_srv.d",
|
|
"src:file:linuxcnc/src/objects/libnml/cms/tcp_srv.o",
|
|
"src:file:linuxcnc/src/objects/libnml/inifile/inifile.d",
|
|
"src:file:linuxcnc/src/objects/libnml/inifile/inifile.o",
|
|
"src:file:linuxcnc/src/objects/libnml/inifile/inivar.d",
|
|
"src:file:linuxcnc/src/objects/libnml/inifile/inivar.o",
|
|
"src:file:linuxcnc/src/objects/libnml/linklist/linklist.d",
|
|
"src:file:linuxcnc/src/objects/libnml/linklist/linklist.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/cmd_msg.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/cmd_msg.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml_oi.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml_oi.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml_srv.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nml_srv.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nmldiag.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nmldiag.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nmlmsg.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/nmlmsg.o",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/stat_msg.d",
|
|
"src:file:linuxcnc/src/objects/libnml/nml/stat_msg.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_sem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_sem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_shm.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_shm.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_timer.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/_timer.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/sem.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/sem.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/shm.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/shm.o",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/timer.d",
|
|
"src:file:linuxcnc/src/objects/libnml/os_intf/timer.o",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/_posemath.d",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/_posemath.o",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/gomath.d",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/gomath.o",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/posemath.d",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/posemath.o",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/sincos.d",
|
|
"src:file:linuxcnc/src/objects/libnml/posemath/sincos.o",
|
|
"src:file:linuxcnc/src/objects/libnml/rcs/rcs_exit.d",
|
|
"src:file:linuxcnc/src/objects/libnml/rcs/rcs_exit.o",
|
|
"src:file:linuxcnc/src/objects/libnml/rcs/rcs_print.d",
|
|
"src:file:linuxcnc/src/objects/libnml/rcs/rcs_print.o",
|
|
"src:file:linuxcnc/src/objects/limit1.sym",
|
|
"src:file:linuxcnc/src/objects/limit1.tmp",
|
|
"src:file:linuxcnc/src/objects/limit1.ver",
|
|
"src:file:linuxcnc/src/objects/limit2.sym",
|
|
"src:file:linuxcnc/src/objects/limit2.tmp",
|
|
"src:file:linuxcnc/src/objects/limit2.ver",
|
|
"src:file:linuxcnc/src/objects/limit3.sym",
|
|
"src:file:linuxcnc/src/objects/limit3.tmp",
|
|
"src:file:linuxcnc/src/objects/limit3.ver",
|
|
"src:file:linuxcnc/src/objects/limit_axis.sym",
|
|
"src:file:linuxcnc/src/objects/limit_axis.tmp",
|
|
"src:file:linuxcnc/src/objects/limit_axis.ver",
|
|
"src:file:linuxcnc/src/objects/lincurve.sym",
|
|
"src:file:linuxcnc/src/objects/lincurve.tmp",
|
|
"src:file:linuxcnc/src/objects/lincurve.ver",
|
|
"src:file:linuxcnc/src/objects/lineardeltakins.sym",
|
|
"src:file:linuxcnc/src/objects/lineardeltakins.tmp",
|
|
"src:file:linuxcnc/src/objects/lineardeltakins.ver",
|
|
"src:file:linuxcnc/src/objects/logic.sym",
|
|
"src:file:linuxcnc/src/objects/logic.tmp",
|
|
"src:file:linuxcnc/src/objects/logic.ver",
|
|
"src:file:linuxcnc/src/objects/lowpass.sym",
|
|
"src:file:linuxcnc/src/objects/lowpass.tmp",
|
|
"src:file:linuxcnc/src/objects/lowpass.ver",
|
|
"src:file:linuxcnc/src/objects/lut5.sym",
|
|
"src:file:linuxcnc/src/objects/lut5.tmp",
|
|
"src:file:linuxcnc/src/objects/lut5.ver",
|
|
"src:file:linuxcnc/src/objects/maj3.sym",
|
|
"src:file:linuxcnc/src/objects/maj3.tmp",
|
|
"src:file:linuxcnc/src/objects/maj3.ver",
|
|
"src:file:linuxcnc/src/objects/match8.sym",
|
|
"src:file:linuxcnc/src/objects/match8.tmp",
|
|
"src:file:linuxcnc/src/objects/match8.ver",
|
|
"src:file:linuxcnc/src/objects/matrix_kb.sym",
|
|
"src:file:linuxcnc/src/objects/matrix_kb.tmp",
|
|
"src:file:linuxcnc/src/objects/matrix_kb.ver",
|
|
"src:file:linuxcnc/src/objects/matrixkins.sym",
|
|
"src:file:linuxcnc/src/objects/matrixkins.tmp",
|
|
"src:file:linuxcnc/src/objects/matrixkins.ver",
|
|
"src:file:linuxcnc/src/objects/max31855.sym",
|
|
"src:file:linuxcnc/src/objects/max31855.tmp",
|
|
"src:file:linuxcnc/src/objects/max31855.ver",
|
|
"src:file:linuxcnc/src/objects/maxkins.sym",
|
|
"src:file:linuxcnc/src/objects/maxkins.tmp",
|
|
"src:file:linuxcnc/src/objects/maxkins.ver",
|
|
"src:file:linuxcnc/src/objects/mesa_7i65.sym",
|
|
"src:file:linuxcnc/src/objects/mesa_7i65.tmp",
|
|
"src:file:linuxcnc/src/objects/mesa_7i65.ver",
|
|
"src:file:linuxcnc/src/objects/mesa_pktgyro_test.sym",
|
|
"src:file:linuxcnc/src/objects/mesa_pktgyro_test.tmp",
|
|
"src:file:linuxcnc/src/objects/mesa_pktgyro_test.ver",
|
|
"src:file:linuxcnc/src/objects/mesa_uart.sym",
|
|
"src:file:linuxcnc/src/objects/mesa_uart.tmp",
|
|
"src:file:linuxcnc/src/objects/mesa_uart.ver",
|
|
"src:file:linuxcnc/src/objects/message.sym",
|
|
"src:file:linuxcnc/src/objects/message.tmp",
|
|
"src:file:linuxcnc/src/objects/message.ver",
|
|
"src:file:linuxcnc/src/objects/millturn.sym",
|
|
"src:file:linuxcnc/src/objects/millturn.tmp",
|
|
"src:file:linuxcnc/src/objects/millturn.ver",
|
|
"src:file:linuxcnc/src/objects/minmax.sym",
|
|
"src:file:linuxcnc/src/objects/minmax.tmp",
|
|
"src:file:linuxcnc/src/objects/minmax.ver",
|
|
"src:file:linuxcnc/src/objects/modmath.sym",
|
|
"src:file:linuxcnc/src/objects/modmath.tmp",
|
|
"src:file:linuxcnc/src/objects/modmath.ver",
|
|
"src:file:linuxcnc/src/objects/module_helper/module_helper.d",
|
|
"src:file:linuxcnc/src/objects/module_helper/module_helper.o",
|
|
"src:file:linuxcnc/src/objects/motmod.sym",
|
|
"src:file:linuxcnc/src/objects/motmod.tmp",
|
|
"src:file:linuxcnc/src/objects/motmod.ver",
|
|
"src:file:linuxcnc/src/objects/moveoff.sym",
|
|
"src:file:linuxcnc/src/objects/moveoff.tmp",
|
|
"src:file:linuxcnc/src/objects/moveoff.ver",
|
|
"src:file:linuxcnc/src/objects/mult2.sym",
|
|
"src:file:linuxcnc/src/objects/mult2.tmp",
|
|
"src:file:linuxcnc/src/objects/mult2.ver",
|
|
"src:file:linuxcnc/src/objects/multiclick.sym",
|
|
"src:file:linuxcnc/src/objects/multiclick.tmp",
|
|
"src:file:linuxcnc/src/objects/multiclick.ver",
|
|
"src:file:linuxcnc/src/objects/multiswitch.sym",
|
|
"src:file:linuxcnc/src/objects/multiswitch.tmp",
|
|
"src:file:linuxcnc/src/objects/multiswitch.ver",
|
|
"src:file:linuxcnc/src/objects/mux16.sym",
|
|
"src:file:linuxcnc/src/objects/mux16.tmp",
|
|
"src:file:linuxcnc/src/objects/mux16.ver",
|
|
"src:file:linuxcnc/src/objects/mux2.sym",
|
|
"src:file:linuxcnc/src/objects/mux2.tmp",
|
|
"src:file:linuxcnc/src/objects/mux2.ver",
|
|
"src:file:linuxcnc/src/objects/mux4.sym",
|
|
"src:file:linuxcnc/src/objects/mux4.tmp",
|
|
"src:file:linuxcnc/src/objects/mux4.ver",
|
|
"src:file:linuxcnc/src/objects/mux8.sym",
|
|
"src:file:linuxcnc/src/objects/mux8.tmp",
|
|
"src:file:linuxcnc/src/objects/mux8.ver",
|
|
"src:file:linuxcnc/src/objects/mux_generic.sym",
|
|
"src:file:linuxcnc/src/objects/mux_generic.tmp",
|
|
"src:file:linuxcnc/src/objects/mux_generic.ver",
|
|
"src:file:linuxcnc/src/objects/nb.msg",
|
|
"src:file:linuxcnc/src/objects/near.sym",
|
|
"src:file:linuxcnc/src/objects/near.tmp",
|
|
"src:file:linuxcnc/src/objects/near.ver",
|
|
"src:file:linuxcnc/src/objects/not.sym",
|
|
"src:file:linuxcnc/src/objects/not.tmp",
|
|
"src:file:linuxcnc/src/objects/not.ver",
|
|
"src:file:linuxcnc/src/objects/objects/hal/user_comps/thermistor.d",
|
|
"src:file:linuxcnc/src/objects/objects/hal/user_comps/thermistor.o",
|
|
"src:file:linuxcnc/src/objects/offset.sym",
|
|
"src:file:linuxcnc/src/objects/offset.tmp",
|
|
"src:file:linuxcnc/src/objects/offset.ver",
|
|
"src:file:linuxcnc/src/objects/ohmic.sym",
|
|
"src:file:linuxcnc/src/objects/ohmic.tmp",
|
|
"src:file:linuxcnc/src/objects/ohmic.ver",
|
|
"src:file:linuxcnc/src/objects/oneshot.sym",
|
|
"src:file:linuxcnc/src/objects/oneshot.tmp",
|
|
"src:file:linuxcnc/src/objects/oneshot.ver",
|
|
"src:file:linuxcnc/src/objects/or2.sym",
|
|
"src:file:linuxcnc/src/objects/or2.tmp",
|
|
"src:file:linuxcnc/src/objects/or2.ver",
|
|
"src:file:linuxcnc/src/objects/orient.sym",
|
|
"src:file:linuxcnc/src/objects/orient.tmp",
|
|
"src:file:linuxcnc/src/objects/orient.ver",
|
|
"src:file:linuxcnc/src/objects/pentakins.sym",
|
|
"src:file:linuxcnc/src/objects/pentakins.tmp",
|
|
"src:file:linuxcnc/src/objects/pentakins.ver",
|
|
"src:file:linuxcnc/src/objects/pid.sym",
|
|
"src:file:linuxcnc/src/objects/pid.tmp",
|
|
"src:file:linuxcnc/src/objects/pid.ver",
|
|
"src:file:linuxcnc/src/objects/pl.msg",
|
|
"src:file:linuxcnc/src/objects/plasmac.sym",
|
|
"src:file:linuxcnc/src/objects/plasmac.tmp",
|
|
"src:file:linuxcnc/src/objects/plasmac.ver",
|
|
"src:file:linuxcnc/src/objects/pt_BR.msg",
|
|
"src:file:linuxcnc/src/objects/pt_br.msg",
|
|
"src:file:linuxcnc/src/objects/pumakins.sym",
|
|
"src:file:linuxcnc/src/objects/pumakins.tmp",
|
|
"src:file:linuxcnc/src/objects/pumakins.ver",
|
|
"src:file:linuxcnc/src/objects/pwmgen.sym",
|
|
"src:file:linuxcnc/src/objects/pwmgen.tmp",
|
|
"src:file:linuxcnc/src/objects/pwmgen.ver",
|
|
"src:file:linuxcnc/src/objects/raster.sym",
|
|
"src:file:linuxcnc/src/objects/raster.tmp",
|
|
"src:file:linuxcnc/src/objects/raster.ver",
|
|
"src:file:linuxcnc/src/objects/reset.sym",
|
|
"src:file:linuxcnc/src/objects/reset.tmp",
|
|
"src:file:linuxcnc/src/objects/reset.ver",
|
|
"src:file:linuxcnc/src/objects/ro.msg",
|
|
"src:file:linuxcnc/src/objects/rosekins.sym",
|
|
"src:file:linuxcnc/src/objects/rosekins.tmp",
|
|
"src:file:linuxcnc/src/objects/rosekins.ver",
|
|
"src:file:linuxcnc/src/objects/rotarydeltakins.sym",
|
|
"src:file:linuxcnc/src/objects/rotarydeltakins.tmp",
|
|
"src:file:linuxcnc/src/objects/rotarydeltakins.ver",
|
|
"src:file:linuxcnc/src/objects/rotatekins.sym",
|
|
"src:file:linuxcnc/src/objects/rotatekins.tmp",
|
|
"src:file:linuxcnc/src/objects/rotatekins.ver",
|
|
"src:file:linuxcnc/src/objects/rtapi/rtapi_pci.d",
|
|
"src:file:linuxcnc/src/objects/rtapi/rtapi_pci.o",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_app.d",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_app.o",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_parport.d",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_parport.o",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_string.d",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_rtapi_string.o",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_ulapi.d",
|
|
"src:file:linuxcnc/src/objects/rtapi/uspace_ulapi.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/5axiskins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/5axiskins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/corexykins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/corexykins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/cubic.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/cubic.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genhexkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genhexkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genserfuncs.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genserfuncs.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genserkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/genserkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/kins_util.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/kins_util.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/lineardeltakins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/lineardeltakins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/maxkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/maxkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/pentakins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/pentakins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/pumakins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/pumakins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rosekins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rosekins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rotarydeltakins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rotarydeltakins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rotatekins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/rotatekins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/scarakins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/scarakins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/scorbot-kins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/scorbot-kins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/switchkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/switchkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/tripodkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/tripodkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/trivkins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/trivkins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/trtfuncs.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/trtfuncs.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/userkfuncs.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/userkfuncs.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/xyzac-trt-kins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/xyzac-trt-kins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/xyzbc-trt-kins.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/kinematics/xyzbc-trt-kins.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/axis.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/axis.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/command.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/command.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/control.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/control.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/dbuf.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/dbuf.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/emcmotutil.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/emcmotutil.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/homemod.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/homemod.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/homing.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/homing.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/motion.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/motion.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/simple_tp.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/simple_tp.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/stashf.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/motion/stashf.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/nml_intf/emcpose.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/nml_intf/emcpose.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/blendmath.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/blendmath.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/spherical_arc.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/spherical_arc.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tc.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tc.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tcq.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tcq.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tp.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tp.o",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tpmod.d",
|
|
"src:file:linuxcnc/src/objects/rtemc/tp/tpmod.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/arithm_eval.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/arithm_eval.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/arrays.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/arrays.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/calc.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/calc.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/calc_sequential.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/calc_sequential.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/manager.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/manager.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/module_hal.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/module_hal.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/symbols.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/symbols.o",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/vars_access.d",
|
|
"src:file:linuxcnc/src/objects/rthal/classicladder/vars_access.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/boss_plc.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/boss_plc.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/counter.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/counter.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/debounce.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/debounce.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/encoder.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/encoder.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/encoder_ratio.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/encoder_ratio.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/enum.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/enum.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/lcd.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/lcd.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/matrix_kb.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/matrix_kb.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/modmath.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/modmath.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/mux_generic.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/mux_generic.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/pid.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/pid.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/pwmgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/pwmgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/sampler.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/sampler.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/siggen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/siggen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/sim_encoder.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/sim_encoder.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/stepgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/stepgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/streamer.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/streamer.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/supply.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/supply.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/threads.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/threads.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/watchdog.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/watchdog.o",
|
|
"src:file:linuxcnc/src/objects/rthal/components/weighted_sum.d",
|
|
"src:file:linuxcnc/src/objects/rthal/components/weighted_sum.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/cpuinfo.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/cpuinfo.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_bb_gpio.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_bb_gpio.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_gm.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_gm.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_gpio.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_gpio.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_parport.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_parport.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_pi_gpio.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_pi_gpio.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_ppmc.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_ppmc.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_speaker.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/hal_speaker.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/abs_encoder.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/abs_encoder.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/bitfile.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/bitfile.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/bspi.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/bspi.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/dpll.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/dpll.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/encoder.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/encoder.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_7i43.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_7i43.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_7i90.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_7i90.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_eth.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_eth.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_pci.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_pci.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_rpspi.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_rpspi.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_spi.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_spi.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_test.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hm2_test.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hostmot2.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/hostmot2.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/inm.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/inm.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/inmux.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/inmux.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/ioport.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/ioport.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/led.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/led.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/oneshot.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/oneshot.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/outm.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/outm.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/periodm.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/periodm.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pins.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pins.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pktuart.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pktuart.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pwmgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/pwmgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/raw.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/raw.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/rcpwmgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/rcpwmgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/resolver.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/resolver.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/setsserial.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/setsserial.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/sserial.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/sserial.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/ssr.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/ssr.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/stepgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/stepgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/tp_pwmgen.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/tp_pwmgen.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/tram.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/tram.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/uart.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/uart.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/watchdog.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/watchdog.o",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/xy2mod.d",
|
|
"src:file:linuxcnc/src/objects/rthal/drivers/mesa-hostmot2/xy2mod.o",
|
|
"src:file:linuxcnc/src/objects/rthal/hal_lib.d",
|
|
"src:file:linuxcnc/src/objects/rthal/hal_lib.o",
|
|
"src:file:linuxcnc/src/objects/rthal/utils/scope_rt.d",
|
|
"src:file:linuxcnc/src/objects/rthal/utils/scope_rt.o",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/_posemath.d",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/_posemath.o",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/gomath.d",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/gomath.o",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/sincos.d",
|
|
"src:file:linuxcnc/src/objects/rtlibnml/posemath/sincos.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/abs_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/and2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/and2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/anglejog.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/anglejog.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/axistest.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/axistest.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bin2gray.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bin2gray.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/biquad.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/biquad.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bitslice.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bitslice.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bitwise.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bitwise.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bldc.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/bldc.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/blend.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/blend.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/carousel.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/carousel.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/charge_pump.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/charge_pump.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarke2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarke2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarke3.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarke3.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarkeinv.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/clarkeinv.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/comp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/comp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/constant.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/constant.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_u32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_u32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_u64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_bit_u64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_u32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_u32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_u64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_float_u64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_bit.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_bit.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_u32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_u32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_u64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s32_u64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_bit.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_bit.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_u32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_u32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_u64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_s64_u64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_bit.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_bit.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_u64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u32_u64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_bit.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_bit.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_s32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_s32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_s64.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_s64.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_u32.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/conv_u64_u32.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/corexy_by_hal.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/corexy_by_hal.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/dbounce.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/dbounce.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ddt.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ddt.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/deadzone.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/deadzone.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/demux.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/demux.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/differential.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/differential.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/div2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/div2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/edge.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/edge.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/eoffset_per_angle.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/eoffset_per_angle.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/estop_latch.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/estop_latch.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/feedcomp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/feedcomp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/filter_kalman.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/filter_kalman.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/flipflop.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/flipflop.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gantry.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gantry.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gearchange.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gearchange.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gray2bin.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/gray2bin.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/histobins.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/histobins.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/homecomp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/homecomp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/hypot.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/hypot.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ilowpass.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ilowpass.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/integ.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/integ.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/invert.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/invert.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/joyhandle.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/joyhandle.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/knob2float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/knob2float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/laserpower.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/laserpower.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/latencybins.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/latencybins.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/led_dim.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/led_dim.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit1.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit1.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit3.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit3.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit_axis.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/limit_axis.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lincurve.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lincurve.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/logic.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/logic.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lowpass.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lowpass.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lut5.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/lut5.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/maj3.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/maj3.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/match8.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/match8.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/matrixkins.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/matrixkins.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/max31855.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/max31855.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mesa_pktgyro_test.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mesa_pktgyro_test.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/message.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/message.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/millturn.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/millturn.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/minmax.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/minmax.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/moveoff.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/moveoff.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mult2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mult2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/multiclick.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/multiclick.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/multiswitch.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/multiswitch.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux16.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux16.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux4.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux4.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux8.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/mux8.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/near.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/near.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/not.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/not.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/offset.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/offset.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ohmic.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ohmic.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/oneshot.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/oneshot.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/or2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/or2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/orient.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/orient.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/plasmac.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/plasmac.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/raster.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/raster.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/reset.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/reset.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/safety_latch.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/safety_latch.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sample_hold.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sample_hold.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/scale.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/scale.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/scaled_s32_sums.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/scaled_s32_sums.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/select8.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/select8.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_axis_hardware.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_axis_hardware.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_home_switch.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_home_switch.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_matrix_kb.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_matrix_kb.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_parport.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_parport.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_spindle.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sim_spindle.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/simple_tp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/simple_tp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sphereprobe.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sphereprobe.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/spindle.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/spindle.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/spindle_monitor.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/spindle_monitor.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/steptest.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/steptest.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sum2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/sum2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/thc.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/thc.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/thcud.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/thcud.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/threadtest.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/threadtest.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/time.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/time.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/timedelay.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/timedelay.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/timedelta.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/timedelta.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tof.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tof.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/toggle.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/toggle.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/toggle2nist.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/toggle2nist.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ton.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/ton.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tristate_bit.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tristate_bit.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tristate_float.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/tristate_float.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/updown.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/updown.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/userkins.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/userkins.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/wcomp.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/wcomp.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xhc_hb04_util.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xhc_hb04_util.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xor2.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xor2.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xyzab_tdr_kins.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/components/xyzab_tdr_kins.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/mesa_7i65.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/mesa_7i65.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/mesa_uart.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/mesa_uart.o",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/serport.d",
|
|
"src:file:linuxcnc/src/objects/rtobjects/hal/drivers/serport.o",
|
|
"src:file:linuxcnc/src/objects/ru.msg",
|
|
"src:file:linuxcnc/src/objects/safety_latch.sym",
|
|
"src:file:linuxcnc/src/objects/safety_latch.tmp",
|
|
"src:file:linuxcnc/src/objects/safety_latch.ver",
|
|
"src:file:linuxcnc/src/objects/sample_hold.sym",
|
|
"src:file:linuxcnc/src/objects/sample_hold.tmp",
|
|
"src:file:linuxcnc/src/objects/sample_hold.ver",
|
|
"src:file:linuxcnc/src/objects/sampler.sym",
|
|
"src:file:linuxcnc/src/objects/sampler.tmp",
|
|
"src:file:linuxcnc/src/objects/sampler.ver",
|
|
"src:file:linuxcnc/src/objects/scale.sym",
|
|
"src:file:linuxcnc/src/objects/scale.tmp",
|
|
"src:file:linuxcnc/src/objects/scale.ver",
|
|
"src:file:linuxcnc/src/objects/scaled_s32_sums.sym",
|
|
"src:file:linuxcnc/src/objects/scaled_s32_sums.tmp",
|
|
"src:file:linuxcnc/src/objects/scaled_s32_sums.ver",
|
|
"src:file:linuxcnc/src/objects/scarakins.sym",
|
|
"src:file:linuxcnc/src/objects/scarakins.tmp",
|
|
"src:file:linuxcnc/src/objects/scarakins.ver",
|
|
"src:file:linuxcnc/src/objects/scope_rt.sym",
|
|
"src:file:linuxcnc/src/objects/scope_rt.tmp",
|
|
"src:file:linuxcnc/src/objects/scope_rt.ver",
|
|
"src:file:linuxcnc/src/objects/scorbot-kins.sym",
|
|
"src:file:linuxcnc/src/objects/scorbot-kins.tmp",
|
|
"src:file:linuxcnc/src/objects/scorbot-kins.ver",
|
|
"src:file:linuxcnc/src/objects/select8.sym",
|
|
"src:file:linuxcnc/src/objects/select8.tmp",
|
|
"src:file:linuxcnc/src/objects/select8.ver",
|
|
"src:file:linuxcnc/src/objects/serport.sym",
|
|
"src:file:linuxcnc/src/objects/serport.tmp",
|
|
"src:file:linuxcnc/src/objects/serport.ver",
|
|
"src:file:linuxcnc/src/objects/setsserial.sym",
|
|
"src:file:linuxcnc/src/objects/setsserial.tmp",
|
|
"src:file:linuxcnc/src/objects/setsserial.ver",
|
|
"src:file:linuxcnc/src/objects/siggen.sym",
|
|
"src:file:linuxcnc/src/objects/siggen.tmp",
|
|
"src:file:linuxcnc/src/objects/siggen.ver",
|
|
"src:file:linuxcnc/src/objects/sim_axis_hardware.sym",
|
|
"src:file:linuxcnc/src/objects/sim_axis_hardware.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_axis_hardware.ver",
|
|
"src:file:linuxcnc/src/objects/sim_encoder.sym",
|
|
"src:file:linuxcnc/src/objects/sim_encoder.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_encoder.ver",
|
|
"src:file:linuxcnc/src/objects/sim_home_switch.sym",
|
|
"src:file:linuxcnc/src/objects/sim_home_switch.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_home_switch.ver",
|
|
"src:file:linuxcnc/src/objects/sim_matrix_kb.sym",
|
|
"src:file:linuxcnc/src/objects/sim_matrix_kb.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_matrix_kb.ver",
|
|
"src:file:linuxcnc/src/objects/sim_parport.sym",
|
|
"src:file:linuxcnc/src/objects/sim_parport.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_parport.ver",
|
|
"src:file:linuxcnc/src/objects/sim_spindle.sym",
|
|
"src:file:linuxcnc/src/objects/sim_spindle.tmp",
|
|
"src:file:linuxcnc/src/objects/sim_spindle.ver",
|
|
"src:file:linuxcnc/src/objects/simple_tp.sym",
|
|
"src:file:linuxcnc/src/objects/simple_tp.tmp",
|
|
"src:file:linuxcnc/src/objects/simple_tp.ver",
|
|
"src:file:linuxcnc/src/objects/sk.msg",
|
|
"src:file:linuxcnc/src/objects/sphereprobe.sym",
|
|
"src:file:linuxcnc/src/objects/sphereprobe.tmp",
|
|
"src:file:linuxcnc/src/objects/sphereprobe.ver",
|
|
"src:file:linuxcnc/src/objects/spindle.sym",
|
|
"src:file:linuxcnc/src/objects/spindle.tmp",
|
|
"src:file:linuxcnc/src/objects/spindle.ver",
|
|
"src:file:linuxcnc/src/objects/spindle_monitor.sym",
|
|
"src:file:linuxcnc/src/objects/spindle_monitor.tmp",
|
|
"src:file:linuxcnc/src/objects/spindle_monitor.ver",
|
|
"src:file:linuxcnc/src/objects/sr.msg",
|
|
"src:file:linuxcnc/src/objects/stepgen.sym",
|
|
"src:file:linuxcnc/src/objects/stepgen.tmp",
|
|
"src:file:linuxcnc/src/objects/stepgen.ver",
|
|
"src:file:linuxcnc/src/objects/steptest.sym",
|
|
"src:file:linuxcnc/src/objects/steptest.tmp",
|
|
"src:file:linuxcnc/src/objects/steptest.ver",
|
|
"src:file:linuxcnc/src/objects/streamer.sym",
|
|
"src:file:linuxcnc/src/objects/streamer.tmp",
|
|
"src:file:linuxcnc/src/objects/streamer.ver",
|
|
"src:file:linuxcnc/src/objects/sum2.sym",
|
|
"src:file:linuxcnc/src/objects/sum2.tmp",
|
|
"src:file:linuxcnc/src/objects/sum2.ver",
|
|
"src:file:linuxcnc/src/objects/supply.sym",
|
|
"src:file:linuxcnc/src/objects/supply.tmp",
|
|
"src:file:linuxcnc/src/objects/supply.ver",
|
|
"src:file:linuxcnc/src/objects/sv.msg",
|
|
"src:file:linuxcnc/src/objects/thc.sym",
|
|
"src:file:linuxcnc/src/objects/thc.tmp",
|
|
"src:file:linuxcnc/src/objects/thc.ver",
|
|
"src:file:linuxcnc/src/objects/thcud.sym",
|
|
"src:file:linuxcnc/src/objects/thcud.tmp",
|
|
"src:file:linuxcnc/src/objects/thcud.ver",
|
|
"src:file:linuxcnc/src/objects/threads.sym",
|
|
"src:file:linuxcnc/src/objects/threads.tmp",
|
|
"src:file:linuxcnc/src/objects/threads.ver",
|
|
"src:file:linuxcnc/src/objects/threadtest.sym",
|
|
"src:file:linuxcnc/src/objects/threadtest.tmp",
|
|
"src:file:linuxcnc/src/objects/threadtest.ver",
|
|
"src:file:linuxcnc/src/objects/time.sym",
|
|
"src:file:linuxcnc/src/objects/time.tmp",
|
|
"src:file:linuxcnc/src/objects/time.ver",
|
|
"src:file:linuxcnc/src/objects/timedelay.sym",
|
|
"src:file:linuxcnc/src/objects/timedelay.tmp",
|
|
"src:file:linuxcnc/src/objects/timedelay.ver",
|
|
"src:file:linuxcnc/src/objects/timedelta.sym",
|
|
"src:file:linuxcnc/src/objects/timedelta.tmp",
|
|
"src:file:linuxcnc/src/objects/timedelta.ver",
|
|
"src:file:linuxcnc/src/objects/tof.sym",
|
|
"src:file:linuxcnc/src/objects/tof.tmp",
|
|
"src:file:linuxcnc/src/objects/tof.ver",
|
|
"src:file:linuxcnc/src/objects/toggle.sym",
|
|
"src:file:linuxcnc/src/objects/toggle.tmp",
|
|
"src:file:linuxcnc/src/objects/toggle.ver",
|
|
"src:file:linuxcnc/src/objects/toggle2nist.sym",
|
|
"src:file:linuxcnc/src/objects/toggle2nist.tmp",
|
|
"src:file:linuxcnc/src/objects/toggle2nist.ver",
|
|
"src:file:linuxcnc/src/objects/ton.sym",
|
|
"src:file:linuxcnc/src/objects/ton.tmp",
|
|
"src:file:linuxcnc/src/objects/ton.ver",
|
|
"src:file:linuxcnc/src/objects/tp.sym",
|
|
"src:file:linuxcnc/src/objects/tp.tmp",
|
|
"src:file:linuxcnc/src/objects/tp.ver",
|
|
"src:file:linuxcnc/src/objects/tpmod.sym",
|
|
"src:file:linuxcnc/src/objects/tpmod.tmp",
|
|
"src:file:linuxcnc/src/objects/tpmod.ver",
|
|
"src:file:linuxcnc/src/objects/tr.msg",
|
|
"src:file:linuxcnc/src/objects/tripodkins.sym",
|
|
"src:file:linuxcnc/src/objects/tripodkins.tmp",
|
|
"src:file:linuxcnc/src/objects/tripodkins.ver",
|
|
"src:file:linuxcnc/src/objects/tristate_bit.sym",
|
|
"src:file:linuxcnc/src/objects/tristate_bit.tmp",
|
|
"src:file:linuxcnc/src/objects/tristate_bit.ver",
|
|
"src:file:linuxcnc/src/objects/tristate_float.sym",
|
|
"src:file:linuxcnc/src/objects/tristate_float.tmp",
|
|
"src:file:linuxcnc/src/objects/tristate_float.ver",
|
|
"src:file:linuxcnc/src/objects/trivkins.sym",
|
|
"src:file:linuxcnc/src/objects/trivkins.tmp",
|
|
"src:file:linuxcnc/src/objects/trivkins.ver",
|
|
"src:file:linuxcnc/src/objects/updown.sym",
|
|
"src:file:linuxcnc/src/objects/updown.tmp",
|
|
"src:file:linuxcnc/src/objects/updown.ver",
|
|
"src:file:linuxcnc/src/objects/userkins.sym",
|
|
"src:file:linuxcnc/src/objects/userkins.tmp",
|
|
"src:file:linuxcnc/src/objects/userkins.ver",
|
|
"src:file:linuxcnc/src/objects/vi.msg",
|
|
"src:file:linuxcnc/src/objects/watchdog.sym",
|
|
"src:file:linuxcnc/src/objects/watchdog.tmp",
|
|
"src:file:linuxcnc/src/objects/watchdog.ver",
|
|
"src:file:linuxcnc/src/objects/wcomp.sym",
|
|
"src:file:linuxcnc/src/objects/wcomp.tmp",
|
|
"src:file:linuxcnc/src/objects/wcomp.ver",
|
|
"src:file:linuxcnc/src/objects/weighted_sum.sym",
|
|
"src:file:linuxcnc/src/objects/weighted_sum.tmp",
|
|
"src:file:linuxcnc/src/objects/weighted_sum.ver",
|
|
"src:file:linuxcnc/src/objects/xhc_hb04_util.sym",
|
|
"src:file:linuxcnc/src/objects/xhc_hb04_util.tmp",
|
|
"src:file:linuxcnc/src/objects/xhc_hb04_util.ver",
|
|
"src:file:linuxcnc/src/objects/xor2.sym",
|
|
"src:file:linuxcnc/src/objects/xor2.tmp",
|
|
"src:file:linuxcnc/src/objects/xor2.ver",
|
|
"src:file:linuxcnc/src/objects/xyzab_tdr_kins.sym",
|
|
"src:file:linuxcnc/src/objects/xyzab_tdr_kins.tmp",
|
|
"src:file:linuxcnc/src/objects/xyzab_tdr_kins.ver",
|
|
"src:file:linuxcnc/src/objects/xyzac-trt-kins.sym",
|
|
"src:file:linuxcnc/src/objects/xyzac-trt-kins.tmp",
|
|
"src:file:linuxcnc/src/objects/xyzac-trt-kins.ver",
|
|
"src:file:linuxcnc/src/objects/xyzbc-trt-kins.sym",
|
|
"src:file:linuxcnc/src/objects/xyzbc-trt-kins.tmp",
|
|
"src:file:linuxcnc/src/objects/xyzbc-trt-kins.ver",
|
|
"src:file:linuxcnc/src/objects/zh_CN.msg",
|
|
"src:file:linuxcnc/src/objects/zh_HK.msg",
|
|
"src:file:linuxcnc/src/objects/zh_TW.msg",
|
|
"src:file:linuxcnc/src/objects/zh_cn.msg",
|
|
"src:file:linuxcnc/src/objects/zh_hk.msg",
|
|
"src:file:linuxcnc/src/objects/zh_tw.msg",
|
|
"src:file:linuxcnc/src/po/.gitignore",
|
|
"src:file:linuxcnc/src/po/README",
|
|
"src:file:linuxcnc/src/po/README_es",
|
|
"src:file:linuxcnc/src/po/Submakefile",
|
|
"src:file:linuxcnc/src/po/bg.po",
|
|
"src:file:linuxcnc/src/po/cs.po",
|
|
"src:file:linuxcnc/src/po/da.po",
|
|
"src:file:linuxcnc/src/po/de.po",
|
|
"src:file:linuxcnc/src/po/es.po",
|
|
"src:file:linuxcnc/src/po/fi.po",
|
|
"src:file:linuxcnc/src/po/fixpaths.py",
|
|
"src:file:linuxcnc/src/po/fr.po",
|
|
"src:file:linuxcnc/src/po/git-merge-po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/bg.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/cs.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/da.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/de.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/es.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/fi.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/fr.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/gmoccapy.pot",
|
|
"src:file:linuxcnc/src/po/gmoccapy/hu.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/it.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/ja.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/nb.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/pl.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/pt_BR.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/ro.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/ru.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/sk.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/sr.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/sv.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/tr.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/vi.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/zh_CN.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/zh_HK.po",
|
|
"src:file:linuxcnc/src/po/gmoccapy/zh_TW.po",
|
|
"src:file:linuxcnc/src/po/hu.po",
|
|
"src:file:linuxcnc/src/po/it.po",
|
|
"src:file:linuxcnc/src/po/ja.po",
|
|
"src:file:linuxcnc/src/po/linuxcnc.pot",
|
|
"src:file:linuxcnc/src/po/nb.po",
|
|
"src:file:linuxcnc/src/po/pl.po",
|
|
"src:file:linuxcnc/src/po/pt_BR.po",
|
|
"src:file:linuxcnc/src/po/ro.po",
|
|
"src:file:linuxcnc/src/po/ru.po",
|
|
"src:file:linuxcnc/src/po/sk.po",
|
|
"src:file:linuxcnc/src/po/sr.po",
|
|
"src:file:linuxcnc/src/po/sv.po",
|
|
"src:file:linuxcnc/src/po/tr.po",
|
|
"src:file:linuxcnc/src/po/vi.po",
|
|
"src:file:linuxcnc/src/po/zh_CN.po",
|
|
"src:file:linuxcnc/src/po/zh_HK.po",
|
|
"src:file:linuxcnc/src/po/zh_TW.po",
|
|
"src:file:linuxcnc/src/rtapi/README",
|
|
"src:file:linuxcnc/src/rtapi/Submakefile",
|
|
"src:file:linuxcnc/src/rtapi/examples/extint/extint.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/fifo/common.h",
|
|
"src:file:linuxcnc/src/rtapi/examples/fifo/fifotask.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/fifo/fifousr.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/semaphore/README",
|
|
"src:file:linuxcnc/src/rtapi/examples/semaphore/common.h",
|
|
"src:file:linuxcnc/src/rtapi/examples/semaphore/master.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/semaphore/slave.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/shmem/common.h",
|
|
"src:file:linuxcnc/src/rtapi/examples/shmem/shmemtask.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/shmem/shmemusr.c",
|
|
"src:file:linuxcnc/src/rtapi/examples/timer/timertask.c",
|
|
"src:file:linuxcnc/src/rtapi/mathstubs.c",
|
|
"src:file:linuxcnc/src/rtapi/meson.build",
|
|
"src:file:linuxcnc/src/rtapi/rtai_rtapi.c",
|
|
"src:file:linuxcnc/src/rtapi/rtai_ulapi.c",
|
|
"src:file:linuxcnc/src/rtapi/rtapi.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_app.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_atomic.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_bitops.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_bool.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_byteorder.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_common.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_ctype.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_device.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_errno.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_firmware.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_gfp.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_io.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_limits.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_list.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_math.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_math64.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_math_i386.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_mutex.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_parport.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_pci.cc",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_pci.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_proc.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_rtai_shm_wrap.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_slab.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_stdint.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_string.h",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_uspace.hh",
|
|
"src:file:linuxcnc/src/rtapi/rtapi_vsnprintf.h",
|
|
"src:file:linuxcnc/src/rtapi/uspace_common.h",
|
|
"src:file:linuxcnc/src/rtapi/uspace_rtai.cc",
|
|
"src:file:linuxcnc/src/rtapi/uspace_rtapi_app.cc",
|
|
"src:file:linuxcnc/src/rtapi/uspace_rtapi_parport.cc",
|
|
"src:file:linuxcnc/src/rtapi/uspace_rtapi_string.c",
|
|
"src:file:linuxcnc/src/rtapi/uspace_ulapi.c",
|
|
"src:file:linuxcnc/src/rtapi/uspace_xenomai.cc",
|
|
"src:file:linuxcnc/src/tests/mathtest.c",
|
|
"src:file:linuxcnc/tests/.gitignore",
|
|
"src:file:linuxcnc/tests/README",
|
|
"src:file:linuxcnc/tests/Submakefile",
|
|
"src:file:linuxcnc/tests/abort/on_abort_command-crazy-move/subroutines/on_abort.ngc",
|
|
"src:file:linuxcnc/tests/alias.0/expected",
|
|
"src:file:linuxcnc/tests/alias.0/test.hal",
|
|
"src:file:linuxcnc/tests/basic/README",
|
|
"src:file:linuxcnc/tests/basic/expected",
|
|
"src:file:linuxcnc/tests/basic/test.hal",
|
|
"src:file:linuxcnc/tests/counter-encoder.0/README",
|
|
"src:file:linuxcnc/tests/counter-encoder.0/expected",
|
|
"src:file:linuxcnc/tests/counter-encoder.0/test.hal",
|
|
"src:file:linuxcnc/tests/edge/README",
|
|
"src:file:linuxcnc/tests/hal-backslash/expected",
|
|
"src:file:linuxcnc/tests/hal-backslash/test.hal",
|
|
"src:file:linuxcnc/tests/halmodule.1/expected",
|
|
"src:file:linuxcnc/tests/halmodule.1/stream_reader.py",
|
|
"src:file:linuxcnc/tests/halmodule.1/stream_test.py",
|
|
"src:file:linuxcnc/tests/halmodule.1/stream_writer.py",
|
|
"src:file:linuxcnc/tests/halmodule.1/test.hal",
|
|
"src:file:linuxcnc/tests/halrun-getopt-reset/README",
|
|
"src:file:linuxcnc/tests/halrun-getopt-reset/expected",
|
|
"src:file:linuxcnc/tests/halrun-getopt-reset/test.hal",
|
|
"src:file:linuxcnc/tests/ilowpass/low-gain/README",
|
|
"src:file:linuxcnc/tests/ilowpass/low-gain/expected",
|
|
"src:file:linuxcnc/tests/ilowpass/low-gain/test.hal",
|
|
"src:file:linuxcnc/tests/ilowpass/wrap-around/README",
|
|
"src:file:linuxcnc/tests/ilowpass/wrap-around/expected",
|
|
"src:file:linuxcnc/tests/ilowpass/wrap-around/test.hal",
|
|
"src:file:linuxcnc/tests/interp/mdi-oword-m66/subs/obug.ngc",
|
|
"src:file:linuxcnc/tests/interp/oword-mdi-sub-update/subs/test1-orig.ngc",
|
|
"src:file:linuxcnc/tests/interp/plug/README",
|
|
"src:file:linuxcnc/tests/limit3/limit-accel-and-max/expected",
|
|
"src:file:linuxcnc/tests/limit3/limit-accel-and-max/test.hal",
|
|
"src:file:linuxcnc/tests/limit3/limit-max-velocity/expected",
|
|
"src:file:linuxcnc/tests/limit3/limit-max-velocity/test.hal",
|
|
"src:file:linuxcnc/tests/linuxcncrsh-tcp/subs/M100",
|
|
"src:file:linuxcnc/tests/linuxcncrsh/subs/M100",
|
|
"src:file:linuxcnc/tests/loadrt.1/expected",
|
|
"src:file:linuxcnc/tests/loadrt.1/test.hal",
|
|
"src:file:linuxcnc/tests/mdi-queue/.gitignore",
|
|
"src:file:linuxcnc/tests/mdi-queue/shared-checkresult",
|
|
"src:file:linuxcnc/tests/mdi-queue/subs/M100",
|
|
"src:file:linuxcnc/tests/mdi-queue/subs/queue-buster.ngc",
|
|
"src:file:linuxcnc/tests/mdi-queue/tool.tbl",
|
|
"src:file:linuxcnc/tests/modparam.0/expected",
|
|
"src:file:linuxcnc/tests/modparam.0/test.hal",
|
|
"src:file:linuxcnc/tests/module-loading/.gitignore",
|
|
"src:file:linuxcnc/tests/module-loading/encoder/PIN_NAME_REGEX.names",
|
|
"src:file:linuxcnc/tests/module-loading/encoder/PIN_NAME_REGEX.num_chan",
|
|
"src:file:linuxcnc/tests/module-loading/encoder_ratio/PIN_NAME_REGEX.names",
|
|
"src:file:linuxcnc/tests/module-loading/encoder_ratio/PIN_NAME_REGEX.num_chan",
|
|
"src:file:linuxcnc/tests/module-loading/or2/README",
|
|
"src:file:linuxcnc/tests/module-loading/pid/PIN_NAME_REGEX.names",
|
|
"src:file:linuxcnc/tests/module-loading/pid/PIN_NAME_REGEX.num_chan",
|
|
"src:file:linuxcnc/tests/module-loading/shared-test.sh",
|
|
"src:file:linuxcnc/tests/module-loading/siggen/PIN_NAME_REGEX.names",
|
|
"src:file:linuxcnc/tests/module-loading/siggen/PIN_NAME_REGEX.num_chan",
|
|
"src:file:linuxcnc/tests/module-loading/sim_encoder/PIN_NAME_REGEX.names",
|
|
"src:file:linuxcnc/tests/module-loading/sim_encoder/PIN_NAME_REGEX.num_chan",
|
|
"src:file:linuxcnc/tests/motion-logger/mountaindew/subs/m442.ngc",
|
|
"src:file:linuxcnc/tests/motion-logger/startup-gcode-abort/nc_files/init.ngc",
|
|
"src:file:linuxcnc/tests/motion/.gitignore",
|
|
"src:file:linuxcnc/tests/motion/README",
|
|
"src:file:linuxcnc/tests/multiclick/README",
|
|
"src:file:linuxcnc/tests/multiclick/expected",
|
|
"src:file:linuxcnc/tests/multiclick/input-signals",
|
|
"src:file:linuxcnc/tests/multiclick/test.hal",
|
|
"src:file:linuxcnc/tests/mux/README",
|
|
"src:file:linuxcnc/tests/mux/expected",
|
|
"src:file:linuxcnc/tests/mux/input-signals",
|
|
"src:file:linuxcnc/tests/mux/test.hal",
|
|
"src:file:linuxcnc/tests/pyhal/expected",
|
|
"src:file:linuxcnc/tests/pyhal/test",
|
|
"src:file:linuxcnc/tests/raster/expected",
|
|
"src:file:linuxcnc/tests/raster/raster.hal",
|
|
"src:file:linuxcnc/tests/raster/test",
|
|
"src:file:linuxcnc/tests/save.1/README",
|
|
"src:file:linuxcnc/tests/save.1/expected",
|
|
"src:file:linuxcnc/tests/save.1/skip",
|
|
"src:file:linuxcnc/tests/save.1/test.hal",
|
|
"src:file:linuxcnc/tests/stepgen.0/expected",
|
|
"src:file:linuxcnc/tests/stepgen.0/test.hal",
|
|
"src:file:linuxcnc/tests/t0/.gitignore",
|
|
"src:file:linuxcnc/tests/t0/README",
|
|
"src:file:linuxcnc/tests/t0/shared-checkresult",
|
|
"src:file:linuxcnc/tests/t0/shared-test.sh",
|
|
"src:file:linuxcnc/tests/t0/subs/M100",
|
|
"src:file:linuxcnc/tests/timedelay.0/expected",
|
|
"src:file:linuxcnc/tests/timedelay.0/test.hal",
|
|
"src:file:linuxcnc/tests/toolchanger/.gitignore",
|
|
"src:file:linuxcnc/tests/toolchanger/README",
|
|
"src:file:linuxcnc/tests/toolchanger/shared-checkresult",
|
|
"src:file:linuxcnc/tests/toolchanger/simpockets.tbl.original",
|
|
"src:file:linuxcnc/tests/toolchanger/subs/M100",
|
|
"src:file:linuxcnc/tests/toolchanger/toolno-pocket-differ/shared-test.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/9axis.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XY.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XYZ.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XYZ_fast.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XYZ_medium.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XYZ_nospindle.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XYZ_uneven.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XY_slowZ.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/XZ.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/add_hal_symlinks.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/axis-A.tcl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/axis-X.tcl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/axis-Y.tcl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/axis-Z.tcl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/axis_mm.ini",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/core_sim_components.hal",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/postgui.hal",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/sim.tbl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/test_status.tcl",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/configs/vcp.xml",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/XYtests/51MeanderAve.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/arc_maxvel_xy.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/arc_time.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/basic_xy.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/full_xy.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/full_xz.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/full_yz.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/simple_arc2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-feed/simple_arc3.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-concave-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-convex-concave.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-convex-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-neartangent.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-planeswitch.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-sawtooth.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-arc-test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/arc-terminal.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/blur_torus.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/line-arc-burnin.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/linearc-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/linearc-end-overrun.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/linearc-stellabee.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/linearc.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/arc-intersections/tort-sam-mach3.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/abc_tangent.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/adjustment.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/arc-with-spiral.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/bad_spirals_1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/bad_spirals_comp.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/bad_spirals_lathe.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/default_tolerance_check.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/feed-tracking-test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/helix_slowdown.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/lineno-test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/modal_state_test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/parabolic_split1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/rgh.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/ripple1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/simple_blend.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/spiral_aggressive.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/tangent_check.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/diagnostic/test-active-states.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/interp_state/sloc_testing.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/interp_state/sloc_toolchange.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/3D_Chips.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/Cereal.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/LHchips4.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/Pasta.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/arc_parabolic.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/bezel_ex_37tick.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/blur_torus.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/cap.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/circle_small_segments_ncd.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/contour.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/line-contouring-xz.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/random_lines_0.001in.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/short_segments_0.001.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/spiral-circular-segments.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/spiral_circular_segments.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/spiral_lines.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/stellabee1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/straight_short_lines_X.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/test_12mmflat.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/tight-corner-tolerance.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/tort-sam-mach3.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/tort.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/trochoidal.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/wheels.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/zigzag_0.002_0.0005.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/performance/zigzag_0.002_0.001.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-concave-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-convex-concave.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-convex-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-neartangent.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-planeswitch.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-sawtooth.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-arc-test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-slowdown.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc-terminal.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc_parabolic_blend.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc_splitting_0.90.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arc_test_1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/arceye-circle-slowdown.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/axis_letter.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/corner_decel.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/cradek_accel_issue.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/dodecagon_0.1in.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/g0_corners.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/line-arc.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/linearc-convex.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/linearc-end-overrun.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/linearc-stellabee.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/linearc.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/long-kink.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/naive_cam_corner1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/naive_cam_corner2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/naive_cam_reversal.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/parabolic-tight.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/parabolic_bump.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/parabolic_test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/parabolic_varying.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/ramp_test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/rapid_3d_corners.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/rick_combine.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/sam-circle_lines.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/sam-tolerance-issue.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/sam_tangent_slowdown.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/sawtooth.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/single_circle.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/spindle-wait.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/spiral_tangent_test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/spiral_tight_circular.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/square.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/square_spiral.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/steve.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/straight_segments.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/tangent_arcs.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/tangent_helix.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/test_diamond.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/test_sharp_corner_rapid.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/test_template.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/tolerance_parabolic_check.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/tolerance_parabolic_check2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/zero_length_move.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/quick-tests/zigzag_square.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/speed-tests/sam-tail-slowdown.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/g33_blend.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/g33_simple.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/g95_blend.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/rigidtap_test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/spindle-wait.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/spiral_spindleon.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/straight_spindleon.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/spindle/tapping.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/test-active-states.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/546_simplfied.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/arc_vel_violation2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/bug424_long.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/circular_tolerance_check.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/feedtest.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/full_reverse.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/machinekit_412.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/maxvel_violation_helical.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/maxvel_violation_helical2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/maxvel_violation_line.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/maxvel_violation_line2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/quick_arc.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/rickg-arcs.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam-master-violation.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_vel_violation.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_violation1.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_violation2.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_violation2_verbatim.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_violation3.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/sam_zero_length_move.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/spreadsheeterrors.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/stellabee-kink-test.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/stellabee-violation-spirals.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/stop-err.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/tangent_lines_smooth.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/tap-discrimant-error-orig.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/tkalcevic_realtime_error.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/violation_checks/z_jump_tangent_improvement.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/wz-tests/130207L.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/wz-tests/130207LZW.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/wz-tests/xw.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/nc_files/wz-tests/xz.ngc",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/accel_err_jump.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/create_3d_line.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/create_3d_random_walk.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/estimate_depth.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/make_peak_img.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/plot_movement.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/octave/process_log.m",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_activate.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_arc_data.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_displacement.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_lengths.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_state.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_tangent_angle.sh",
|
|
"src:file:linuxcnc/tests/trajectory-planner/circular-arcs/util/save_vel.sh",
|
|
"src:file:linuxcnc/unit_tests/catch.hpp",
|
|
"src:file:linuxcnc/unit_tests/greatest.h",
|
|
"src:file:wasm-core/CMakeLists.txt",
|
|
"src:file:wasm-core/include/sim_api.h",
|
|
"src:file:wasm-core/include/sim_event.h",
|
|
"src:file:wasm-core/include/sim_hal.h",
|
|
"src:file:wasm-core/include/sim_posemath.h",
|
|
"src:file:wasm-core/include/sim_protocol.h",
|
|
"src:file:wasm-core/src/sim_api.c",
|
|
"src:file:wasm-core/src/sim_event.c",
|
|
"src:file:wasm-core/src/sim_hal.c",
|
|
"src:file:wasm-core/src/sim_posemath.c",
|
|
"src:file:wasm-core/src/sim_protocol.c",
|
|
"src:file:wasm-core/tests/sim_api_test.c",
|
|
"src:file:wasm-core/tests/sim_event_test.c",
|
|
"src:file:wasm-core/tests/sim_hal_test.c",
|
|
"src:file:wasm-core/tests/sim_posemath_test.c",
|
|
"src:file:wasm-core/tests/sim_protocol_test.c",
|
|
"src:file:web/worker/capabilities.mjs",
|
|
"src:file:web/worker/error-map.mjs",
|
|
"src:file:web/worker/replay.mjs",
|
|
"src:file:web/worker/sim-session.mjs",
|
|
"src:file:web/worker/sim-worker.mjs",
|
|
"src:file:web/worker/test_replay.mjs",
|
|
"src:file:web/worker/test_runtime_mapping.mjs",
|
|
"src:file:web/worker/test_sim_session.mjs",
|
|
"src:file:web/worker/test_wasm_session.mjs",
|
|
"src:file:web/workspace/journal.mjs",
|
|
"src:file:web/workspace/recovery.mjs",
|
|
"src:file:web/workspace/test_recovery.mjs",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/anglejog",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/anglejog/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:15:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/anglejog/anglejog.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/anglejog/LIB:basic_sim.tcl -no_sim_spindle -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:24:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/anglejog/anglejog.ini:35:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/anglejog/anglejog.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:27:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:34:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:39:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:40:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/check_xyz_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:42:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis.ini:50:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:29:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/locking_indexer.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_9axis.ini:43:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/position9.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:30:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/axis_mm.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/canterp.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:24:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/canterp.ini:82:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/classicladder/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:13:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:20:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/classicladder/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:21:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:22:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/classicladder/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini:32:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:3:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/db_demo/db_nonran.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini:4:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/db_demo",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:3:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/db_demo/db_ran.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/db_demo/db_ran.ini:4:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/db_demo",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:17:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/external_offsets/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/external_offsets/halscope -i dynamic_offsets.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_sim_spindle",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini:5:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/external_offsets/sim_pin --title \"MPG Simulator\" ",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:20:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/external_offsets",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/external_offsets/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:23:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini:6:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:15:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/external_offsets/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:2:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini:3:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:22:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/external_offsets",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/external_offsets/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:25:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/external_offsets/sim_pin ini.x.max_acceleration ini.x.max_velocity",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/external_offsets/opa.ini:6:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:10:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:11:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/extrajoints",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/extrajoints/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:3:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini:4:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\" ",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/extrajoints",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:16:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/extrajoints/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:3:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:4:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\" ",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini:9:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:10:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:11:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/extrajoints",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/extrajoints/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:3:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:4:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\" ",
|
|
"src:resource:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini:5:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j5 extrajoints\" ",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/foam/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/foam/foam.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/foam/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/foam/axis_foam.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/foam/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:20:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:21:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:22:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:23:ini:filter_command:linuxcnc/configs/sim/axis/gantry/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gantry/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/gantry/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/gantry/halscope -i gantry_jjog.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:21:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:22:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:23:ini:filter_command:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:24:ini:filter_command:linuxcnc/configs/sim/axis/gantry/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gantry/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/gantry/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gantry/gantry_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:26:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini:40:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc.ini:14:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc.ini:8:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/geometry/xyzc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini:14:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini:8:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/geometry/xyzc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/gladevcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:39:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/gladevcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/gladevcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:5:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini:5:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/gladevcp",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:39:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/gladevcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/probe.ini:96:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/gladevcp/probe_gui.sh",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:25:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:38:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/gladevcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini:95:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.sh",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/halui_pyvcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:14:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/halui_pyvcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:21:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/halui_pyvcp/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:22:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/halui_pyvcp/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini:36:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:90:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/hal-histogram -geometry +50+50",
|
|
"src:resource:linuxcnc/configs/sim/axis/histogram_demo.ini:91:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/hal-histogram -geometry +10+10",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/historical_lathe.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:93:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_hal_demo.ini:93:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin ~dup2",
|
|
"src:resource:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:28:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.joint/mode=Pulse ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.teleop/mode=Pulse ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:3:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:7:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini:7:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:xhc-hb04.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini:5:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:10:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/laser/laser.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/laser/laser.ini:9:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/laser/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/lathe-fanucy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:20:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:20:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/lathe-fanucy",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/lathe-fanucy/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe-fanucy/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini:39:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:30:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe.ini:40:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/lathe_multispindle/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/lathe_multispindle/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe_multispindle/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe_multispindle/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/sim_ldelta.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:95:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:125:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/sim_ldelta.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:52:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin >/dev/null ",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:52:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/sim_pin >/dev/null ~dup2",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ldelta_demo.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:11:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/minimal_xyz.ini:6:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:6:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini:7:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:7:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:8:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini:9:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:6:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini:7:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:7:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:8:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini:9:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:6:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halshow ./moveoff.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:7:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini:8:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/sim_pin ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:12:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:7:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:8:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini:9:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:7:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:8:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini:9:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:30:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:41:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:42:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:42:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:51:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini:59:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:31:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:42:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:43:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gcmc_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:43:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:43:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:52:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini:61:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:30:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ngcgui/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:31:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/lathe",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:31:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:3:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:40:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:20:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:31:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:32:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:32:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:31:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:42:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:43:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:43:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:4:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:52:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:60:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini:9:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/orphans/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:37:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/orphans/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/acc_test.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/orphans/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:21:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/orphans/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/orphans/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/orphans/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/axis_noio.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:126:ini:TOOL:TOOL_TABLE:linuxcnc/configs/sim/axis/orphans/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:16:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:25:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/orphans/rack-toolchange/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:25:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:40:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini:49:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/orphans/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/orphans/check_xyz_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:37:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/orphans/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/orphans/medium.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/orphans/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:17:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:19:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:28:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:37:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/pentapod/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/pentapod/pentapod.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/pentapod",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/pentapod/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:50:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/pentapod/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/pentapod/pentapod.ini:54:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:13:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:14:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:15:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:21:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:26:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/axis/plasma/imperial_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:36:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:49:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/plasma/imperial_position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:8:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/plasma/imperial_parameters.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:9:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/plasma",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/imperial.ini:9:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:13:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:14:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:15:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:21:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:26:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/axis/plasma/metric_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:2:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:36:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:49:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/plasma/metric_position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:8:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/plasma/metric_parameters.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:9:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/plasma",
|
|
"src:resource:linuxcnc/configs/sim/axis/plasma/metric.ini:9:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:37:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/profile_axis.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:28:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/qtvcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/qtvcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:28:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/qtvcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/qtvcp/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/rdelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:37:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/random_tc.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/anglejog/anglejog_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/axis_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/canterp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/classicladder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/cooling.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/3joint_xyz.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/base.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_editor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/circles.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dyn_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffset.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_monitor.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/eoffsets_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/jwp_z_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/opa_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/external_offsets/queuebuster.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/extrajoints/extrajoints.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/axis_foam.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/foam/foam.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gantry/gantry_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/meter_scale.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/probe.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/gladevcp/test_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/pyvcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/histogram_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/historical_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_hal_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/axis_owordsub_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo-ns.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/osubdemo.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/t3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/tdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/toolchange-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2-tc.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/iocontrolv2/v2_oword_gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xhc-hb04-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx_jog.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/laser.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/pyvcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/raster_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/laser/vector_test2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe-fanucy/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/lathe_multispindle/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ldelta_demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/minimal_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_6.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_7.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_display_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/moveoff_gladevcp_8.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/moveoff/removeshort.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/axis_resize.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/fullscreen.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/acc_test.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noio.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_noiocontrol.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/gladevcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/core_sim_test.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/embedding.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/python/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange-noioctl.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/iov2.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/medium.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/customtask.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/nulluserfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/plugins.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/sqltoolaccess.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/task.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/tooltable.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/pysubs/userfuncs.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/orphans/taskcall.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/panelui_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/panelui-demo/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/pentapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/pentapod/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_block.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_bolt.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_circle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_ellipse.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_gusset.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_line.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_polygon.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_rectangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_sector.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_settings.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_slot.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_star.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conv_triangle.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/conversational.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/custom/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/block.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/boltcircle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/chips_plasma.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/circle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/closer.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/e.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ellipse.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/gusset.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/line.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/n.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/ne.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/nw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/polygon.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/rectangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/s.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/save.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/se.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sector.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/slot.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/star.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/sw.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/triangle.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_p.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_t.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/view_z.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/images/w.png",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/lib/sim/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/migrate.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/plasmac2/plasmac2.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_commands.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_hal.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/plasma/user_periodic.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/postgui_calib_helper.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/profile_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/random_tc.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/lathe.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/nstools.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/sim_mm_test.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:0:directory_member:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:111:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:1:hal:loadusr:linuxcnc/configs/sim/axis/halui_pyvcp/vcp.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:22:hal:loadusr:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.clp",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:27:hal:source:linuxcnc/configs/sim/axis/panelui-demo/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/sim_rdelta.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/rdelta.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines/g843.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/cycle/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/cycle/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/cycle/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/cycle/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/cycle/locking_indexer.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/cycle/position9.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini:47:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/cycle/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/extend_m60.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/prepare.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setfeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/setspeed.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines/settool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/extend-builtins/show.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/extend-builtins/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/extend-builtins/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:44:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/extend-builtins/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:45:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/remap/extend-builtins/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:50:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/extend-builtins/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini:55:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/extend-builtins/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/change_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m400.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/m410.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines/prepare_min.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/oword.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/getting-started/python/util.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/getting-started/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/getting-started/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/getting-started/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:46:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/getting-started/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/manual_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines/restore.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/gladevcp-handler.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_files/tcdemo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/rack_change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_getput_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines/tool_holder_clear_move.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.glade",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/rack-toolchange/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/rack-toolchange/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/rack-toolchange/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:37:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/remap/rack-toolchange/gladevcp.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/rack-toolchange/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_files/examples.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:0:directory_member:linuxcnc/configs/sim/axis/remap/stop-lookahead/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/remap/stop-lookahead/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/remap/stop-lookahead/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_subroutines",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/remap/stop-lookahead/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/remap/stop-lookahead/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/remap/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:0:directory_member:linuxcnc/configs/sim/axis/rose_engine/rcone_demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/rose_engine/halshow rose_engine.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:26:ini:RS274NGC:PARAMETER_FILE:/tmp/rose.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/rose_engine",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/rose_engine/rose.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/rose_engine/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simtcl/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini:0:directory_member:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simtcl/LIB:core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simtcl/LIB:axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini:6:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/simtcl/LIB:simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:0:directory_member:linuxcnc/configs/sim/axis/spindle_orient/orient.ui",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/spindle_orient/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib/common_nc_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/spindle_orient/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/spindle_orient/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/spindle_orient/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/spindle_orient/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:37:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/spindle_orient/orient.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:42:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/spindle_orient/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/spindle_orient/orient.ini:47:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/twopass/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/twopass/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/load_for_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/twopass/twopass_excluded.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/twopass/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/twopass/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/twopass/twopass.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:11:ini:DISPLAY:PROGRAM_PREFIX:/home/rolf/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:39:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:19:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/demos/xyzab-tdr-demo.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/emc2.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:16:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:19:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:24:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini:63:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:21:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini:65:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzac_switchkins_test_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/xyzbc_switchkins.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/centering.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_ac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/helix_bc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzac_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs/xyzbc_switchkins_sub.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt-headless_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt_cmds.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:21:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/switchkins_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini:65:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:10:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/VMC_toolchange",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:21:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:22:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:24:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:34:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini:9:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/arm.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/base.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/carousel.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/head.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/saddle.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/table.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:10:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/VMC_toolchange",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:21:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:22:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/sim_vmc.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:24:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:34:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini:9:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini:10:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/hbm/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/hbm/hbm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini:19:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/hbm/hbm.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini:29:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/hbm/hbm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini:9:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/hexapod-sim/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:15:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/hexapod-sim/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/hexapod-sim/kinematics.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:32:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link1.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link2.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link3.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link4.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link5.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link6.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/link7.stl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:30:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/melfa-sim",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:31:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/melfa-sim/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:52:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:7:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/melfa-sim/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/example.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/millturn.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/millturn/millturn-postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:13:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/millturn/millturn.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:14:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:1:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/vismach/millturn/halshow ./millturn.halshow",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:31:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/axis/vismach/millturn",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:32:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/millturn/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:53:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/millturn/millturn.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/millturn/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini:9:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/millturn/millturn.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/puma/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/puma/puma.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:33:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:34:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:54:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:7:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/puma/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:19:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/puma/puma560.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:31:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:32:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini:9:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:11:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:13:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/puma/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/puma/puma560.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:30:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:31:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:8:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini:9:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link1.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link2.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link3.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link4.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link5.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link6.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_link7.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_seam_weld.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/puma_text.obj",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/puma/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:43:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:44:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:50:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/puma/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:55:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/puma/puma.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:63:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma_dh.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/puma/puma_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini:83:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/puma/puma.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:11:ini:DISPLAY:PROGRAM_PREFIX:/home/rolf/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/rolfmill/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:42:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/axis/vismach/rolfmill/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini:83:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/rolfmill/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/axis/vismach/scara/scara.xml",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:12:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/axis/vismach/scara/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:18:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/vismach/scara/scara.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/vismach/scara/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/axis/vismach/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/vismach/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/vismach/scara/scara.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/vismach/scara/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:0:directory_member:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/axis/wrapped_rotary/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.var",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:26:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.hal",
|
|
"src:resource:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini:40:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/axis/wrapped_rotary/gantry_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:15:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:15:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:3:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:0:directory_member:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:15:ini:APPLICATIONS:APP:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:4:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini:5:ini:HAL:HALFILE:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/ConfigParser_New.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_router_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_toolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/easygui.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/estimate_time.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/extents.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/globals.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m101.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m102.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m103.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m104.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m105.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m106.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/craftsmancnc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81a.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex1.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81mult.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/eight.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2-3.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-threads.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/nurbs01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/twelve.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/linuxcnc screen.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/sim_core.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/spindle_control.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/tool.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/toolchange.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/cnc_settings.ini:0:directory_member:linuxcnc/configs/sim/craftsman/vfd_controller.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/ConfigParser_New.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cnc_settings.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_router_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_toolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/easygui.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/estimate_time.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/extents.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/globals.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m101.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m102.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m103.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m104.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m105.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m106.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/craftsmancnc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81a.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex1.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81mult.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/eight.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2-3.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-threads.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/nurbs01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/twelve.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/linuxcnc screen.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/sim_core.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/spindle_control.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/tool.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/toolchange.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:0:directory_member:linuxcnc/configs/sim/craftsman/vfd_controller.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:11:ini:DISPLAY:PROGRAM_PREFIX:/home/craftsman900/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:13:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/craftsman/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/craftsman/craftsmancnc.var",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:26:ini:RS274NGC:SUBROUTINE_PATH:/home/craftsman/linuxcnc/configs/craftsmancnc/macros/",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/craftsman/craftsmancnc.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/craftsman/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/craftsman/cm_axis_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/craftsman/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/craftsman/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/craftsman/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/ConfigParser_New.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cm_axis_panel.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/cnc_settings.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsman_router_icon.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.glade",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/craftsmancnc.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/easygui.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/estimate_time.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/extents.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/globals.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m101.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m102.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m103.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m104.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m105.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/macros/m106.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/craftsmancnc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81a.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex1.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81ex2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/G81mult.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/eight.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2-3.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g2.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/g76-threads.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/nurbs01.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/gcodes_files/twelve.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/linuxcnc screen.png",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen1.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen2.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/screens/screen3.jpg",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/spindle_control.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/tool.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/toolchange.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:0:directory_member:linuxcnc/configs/sim/craftsman/vfd_controller.py",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:10:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/craftsman/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/configs/sim/craftsman/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:14:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/craftsman/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/craftsman/craftsmancnc.var",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/craftsman/macros",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/craftsman/sim_core.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/craftsman/craftsman_spindle.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/craftsman/craftsman_toolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/craftsman/craftsmancnc.ini:47:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/craftsman/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/6_axis.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/8_axis.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:33:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/9_axis.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:25:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:42:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:10:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:20:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:21:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:38:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini:9:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:37:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:42:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:32:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:33:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:40:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:42:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:43:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:50:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:53:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:12:ini:DISPLAY:PROGRAM_PREFIX:/home/emcmesa/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:21:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:32:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:33:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:40:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:42:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:49:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:52:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:31:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:32:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:42:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:42:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:42:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:44:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:51:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:52:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:53:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:54:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:61:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:64:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini:6:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:34:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:27:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:37:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:47:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:10:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.para",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:13:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:13:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:19:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:20:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:30:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:31:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:42:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:43:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:44:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:51:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:54:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/6_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/8_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/9_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_6.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_7.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_8.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_9.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/core_sim_XYZCW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy2.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/h_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/jogwheel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/left_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/change.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/go_to_position.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/halo_world.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/i_am_lost.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/goto_x_y_z.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/i_am_lost.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/images/macro_8.png",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/increment.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/jog_around.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_0.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_1.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_10.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_11.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_12.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_13.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_14.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_15.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_2.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_3.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_4.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_5.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_6.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_7.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_8.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/macro_9.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/macros/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pendant.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/tool_sensor.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/v_buttonlist.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/dro.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:13:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:13:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/vcp_box.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:18:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:19:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:30:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:39:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:40:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/button.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:22:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:23:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/boring.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/chamfer.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_C.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/drilling.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/facing.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/grooving.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_c.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_cw.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/radius.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe_CW.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/threading.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/lathe_configs/turning.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:17:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:17:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:26:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/core_sim_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/simulated_home_lathe.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:42:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_GANTRY_sim.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:25:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/LinuxCNC-HAL-SIM-SCARA.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/spindle_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:15:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:15:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara_sim_4.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:32:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:6:hal:source:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/boat-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/impeller-7bl-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzac.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples/test-xyzbc.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/sim-xyzac-trt.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/emc2.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:16:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:17:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:19:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:32:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:0:directory_member:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy.pref",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/plasma.py",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:18:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:19:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gmoccapy/plasma_config/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:29:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gmoccapy/plasma_config/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:30:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gmoccapy/macros",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/plasma_config/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/gmoccapy/plasma_config/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:46:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gmoccapy/plasma_config/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gmoccapy/plasma_config/torches.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.glade",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.hal",
|
|
"src:resource:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gmoccapy/plasma_config/signals.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gladevcp-test.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/auto_zref.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/laserzero.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/tool_sensor.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/touch_plate.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/bg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-ins.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-light.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-spin.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menubar.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menuitem.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/notebook.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/null.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-tree.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed (copy).png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_horizontal.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_vertical.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/thumb.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/statusbar/resizer.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-close-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-max-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-min-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-unmax-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/metacity-theme-1.xml",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-close-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-maximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-minimize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-unmaximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:24:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:33:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:40:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:42:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:43:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:50:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen.ini:53:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim-9gscreen.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/locking_indexer.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:37:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position9.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:20:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:38:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:20:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:31:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:38:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini:41:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:32:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:39:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:15:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:22:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:23:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:24:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:25:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:26:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:33:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:36:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:6:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini:7:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:32:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/gscreen_custom/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gladevcp-test.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/auto_zref.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/laserzero.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/tool_sensor.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/touch_plate.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/bg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-ins.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-light.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-spin.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menubar.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menuitem.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/notebook.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/null.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-tree.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed (copy).png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_horizontal.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_vertical.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/thumb.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/statusbar/resizer.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-close-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-max-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-min-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-unmax-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/metacity-theme-1.xml",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-close-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-maximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-minimize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-unmaximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/gscreen/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:33:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:39:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gladevcp-test.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_down2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_left2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_right2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/arrow_up2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/blank.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/button4.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/check2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/default.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/green_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/in.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/obutton2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/option2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/radio2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/red_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin1.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/spin3.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/trough.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_theme/gtk-2.0/yellow_button2.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/auto_zref.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/laserzero.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/tool_sensor.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/touch_plate.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/bg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-ins.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-light.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-spin.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menubar.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menuitem.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/notebook.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/null.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-tree.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed (copy).png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_horizontal.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_vertical.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/thumb.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/statusbar/resizer.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-close-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-max-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-min-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-unmax-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/metacity-theme-1.xml",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-close-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-maximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-minimize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-unmaximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/spartan.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/gscreen/vcp_box.glade",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:40:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/gscreen_mm.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:14:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gscreen",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gscreen/industrial_lathe_wear",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:41:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/lathe-fanucy.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:41:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:42:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:51:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:51:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:53:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:67:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/ngcgui/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:70:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:0:directory_member:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:0:directory_member:linuxcnc/configs/sim/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:10:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:41:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:42:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:51:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:51:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:53:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:67:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/ngcgui/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:70:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/pyngcgui_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/auto_zref.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/laserzero.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/tool_sensor.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/macros/touch_plate.ngc",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up-disable.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/arrow/arrow-up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/bg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-ins.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-light.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button-spin.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/button/button.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/c_box/c_box.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/entry/entry.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/line-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menubar.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/menubar/menuitem.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/notebook.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top-active.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/notebook/tab-top.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/null.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/progressbar-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-tree.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/progressbar/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed (copy).png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/radio/radio.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/slider-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-horiz.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scale/trough-vert.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_down_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_left_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_right_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/arrow_up_clicked.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_horizontal.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/scrollbar_vertical.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/thumb.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-h.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/scrollbar/trough-v.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/gtk-2.0/statusbar/resizer.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-bottom.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-left.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/border-right.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/bottom-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-pressed.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-bkg.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-close-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-max-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-min-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/button-unmax-icon.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/metacity-theme-1.xml",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_center_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_left_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/title_right_dimple_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_center_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_left_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/titlebar_right_gradient_unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-left-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/top-grip-right-corner.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-close-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-maximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-minimize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:0:directory_member:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon_theme/metacity-1/window-chrome-unmaximize-unfocused.png",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:16:ini:DISPLAY:PROGRAM_PREFIX:/home/jim/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:17:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/silverdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:27:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/silverdragon/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:28:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/gscreen/silverdragon/macros",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/silverdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/silverdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:57:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/gscreen/silverdragon/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini:60:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gscreen/silverdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:0:directory_member:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:10:hal:source:linuxcnc/configs/sim/gscreen/spartan/sim_hardware.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:15:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:17:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.var",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/spartan/spartan.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/gscreen/spartan/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/gscreen/spartan/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/gscreen/spartan/spartan.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/gscreen/spartan/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_2.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:13:ini:DISPLAY:PROGRAM_PREFIX:/media/imac/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini:48:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_2.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:12:ini:DISPLAY:PROGRAM_PREFIX:/root/emc2/ngc/",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:25:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:35:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/pyvcp_demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:44:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini:47:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:0:directory_member:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:15:ini:DISPLAY:PROGRAM_PREFIX:/media/imac/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:28:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:38:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.hal",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:6:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_1.xml",
|
|
"src:resource:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini:8:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab_2.xml",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtaxis/gantry/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:18:ini:filter_command:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:19:ini:filter_command:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:20:ini:filter_command:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:21:ini:filter_command:linuxcnc/configs/sim/qtaxis/gantry/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtaxis/gantry/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/gantry/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/gantry/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/gantry/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:40:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtaxis/gantry/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtaxis/gantry/WORKINGFOLDER/qtaxis_gantry.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:19:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtaxis/non-trivial/scara/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:24:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtaxis/non-trivial/scara/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:25:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtaxis/non-trivial/scara/qtdragon_scara.log",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:33:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:39:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.var",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtaxis/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:60:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/non-trivial/scara/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini:66:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:24:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtaxis/xyz/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:52:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtaxis/xyz/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:53:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtaxis/xyz/WORKINGFOLDER/qtaxis.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/xyz/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/xyz/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:63:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtaxis/xyz/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:65:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtaxis/xyz/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:74:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtaxis/xyz/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini:78:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtaxis/xyz/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-xyyz-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:63:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:45:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:63:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:67:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:45:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:63:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:64:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:66:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:66:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:66:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:82:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:83:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini:84:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:63:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:64:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:66:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:66:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:66:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:82:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:83:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini:84:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:27:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:31:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:32:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:47:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:49:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:49:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:49:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:67:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:63:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAB.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:30:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:45:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:46:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAC.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:0:directory_member:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:23:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd.log",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:45:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:63:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/WORKINGFOLDER/qtdragon_hd.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_filter.py",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/custom_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/imperial_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/machine.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/metric_tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-imperial.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac-metric.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/qtvcp.prefs",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_no_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:0:directory_member:linuxcnc/configs/sim/qtplasmac/sim_stepgen.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:7:hal:loadusr:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini:9:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:0:directory_member:linuxcnc/configs/sim/qttouchy/qttouchy.pref",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:16:hal:loadusr:linuxcnc/configs/sim/qttouchy/sim_panel.ui",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:16:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:17:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qttouchy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:45:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qttouchy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:46:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:54:ini:HAL:HALFILE:linuxcnc/configs/sim/qttouchy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:55:ini:HAL:HALFILE:linuxcnc/configs/sim/qttouchy/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:56:ini:HAL:HALFILE:linuxcnc/configs/sim/qttouchy/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:57:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qttouchy/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qttouchy/WORKINGFOLDER/qttouchy.pref",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:66:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qttouchy/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qttouchy/qttouchy.ini:70:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qttouchy/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:16:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:17:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:44:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:53:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:54:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:55:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:56:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:57:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/blender.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:66:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/blender.ini:70:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:20:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:21:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:30:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/qtvcp_screens",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:30:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:30:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:30:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:33:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:45:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:46:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:52:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:55:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/WORKINGFOLDER/qtlathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:20:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:25:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:26:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/qtdragon_scara.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:34:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:40:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:61:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini:67:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:39:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:48:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:4:ini:DISPLAY:DISPLAY:linuxcnc/configs/sim/qtvcp_screens/qt_cnc_800x600.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:52:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_800x600.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:18:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:19:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:20:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:21:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:29:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:30:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:31:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:40:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis_gantry.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:24:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:53:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:54:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:63:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:66:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:75:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini:79:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:17:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:18:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:44:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:45:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:58:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/WORKINGFOLDER/qtaxis_lathe.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:60:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:60:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal~dup2",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:69:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini:73:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:19:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:20:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:48:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:49:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:57:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:58:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:59:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:60:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:62:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:73:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini:77:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:19:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:20:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:47:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:48:ini:RS274NGC:SUBROUTINE_PATH:",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/macros/mill",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:48:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/probe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:56:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:57:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:58:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:59:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:60:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:69:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini:73:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:11:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:12:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:31:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:32:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:38:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:41:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:42:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/locking_indexer.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:46:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position9.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_9axis.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:13:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:14:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:21:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:22:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:23:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:24:ini:filter_command:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:32:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_gantry.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:24:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim_mm.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:31:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:36:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:45:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position_mm.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_mm.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:27:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:29:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:30:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:67:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:68:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:70:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:70:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:87:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:88:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini:89:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:27:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:29:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:30:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:44:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:45:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:47:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:47:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap-subroutines",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:47:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/remap_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:67:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:68:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:28:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:30:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:33:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:50:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:52:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:52:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:69:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:70:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:71:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:27:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:29:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:30:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:64:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:65:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:67:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:84:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:85:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini:86:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:51:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:53:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:70:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:71:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-xyyz-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:72:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:51:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:53:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:71:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:72:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:73:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:29:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:31:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:34:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:36:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:52:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:53:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:72:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:73:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:74:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:50:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:51:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:53:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:70:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:71:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:72:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:29:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:31:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:34:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:36:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:52:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:53:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:72:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:73:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:74:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini:7:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:54:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:67:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:68:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:77:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini:81:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:18:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:19:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:58:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:59:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:59:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:68:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:69:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:70:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:71:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:72:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:81:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini:85:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:18:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:19:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:58:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:59:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:59:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:68:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:69:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:70:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:71:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:72:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:81:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini:85:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:54:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:55:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:64:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:67:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:68:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:77:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini:81:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/tester.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:16:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:17:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:43:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:44:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/probe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:52:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:53:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:54:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:55:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:56:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtx11mill.pref",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:65:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini:69:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/background.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/blender.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toolchange.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/428remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/429remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs/430remap.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/lathe-wear.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-16x16.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-24x24.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-32x32.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/axis-48x48.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/close.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/resume_inhibit.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_ccw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/spindle_cw.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_error.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_info.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/std_warning.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_p.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_x.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_y2.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_axis_z2.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_blockdelete.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_clear.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_estop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_open.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_optpause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_pause.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_power.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_reload.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_rotate.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_run.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_step.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_stop.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_verify.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomin.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/images/tool_zoomout.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis/qtaxis_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/silver_dragon.png",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtdragon/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp.glade",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gvcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathehandler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/lathemacro.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/pyngcgui.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp_handler_1.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc/qtdefault_ngc_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtvcp_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim-9axis.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/configs/sim/qtvcp_screens/sim_mm.tbl",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:0:directory_member:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:15:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:16:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/qtvcp_screens/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:27:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/macros/lathe",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:36:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:37:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:38:ini:HAL:HALFILE:linuxcnc/configs/sim/qtvcp_screens/check_constraints.hal",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:47:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/qtvcp_screens/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:4:ini:DISPLAY:DISPLAY:linuxcnc/configs/sim/qtvcp_screens/tester.ui",
|
|
"src:resource:linuxcnc/configs/sim/qtvcp_screens/tester.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/screwcompX.dat",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tripod.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:23:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/tklinuxcnc/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/tklinuxcnc/sim_ldelta.hal",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:28:ini:HAL:HALFILE:linuxcnc/configs/sim/tklinuxcnc/axis_manualtoolchange.hal",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:8:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:95:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini:9:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/screwcompX.dat",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tripod.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:13:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/tklinuxcnc/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:20:ini:HAL:HALFILE:linuxcnc/configs/sim/tklinuxcnc/servo_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini:30:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/screwcompX.dat",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tripod.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:12:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:13:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:15:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/tklinuxcnc/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:22:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/tklinuxcnc/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/screwcompX.dat",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:10:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:11:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:16:ini:filter_command:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:17:ini:filter_command:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:18:ini:filter_command:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:19:ini:filter_command:linuxcnc/configs/sim/tklinuxcnc/toolpaths.py",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:21:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/tklinuxcnc/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:27:ini:HAL:HALFILE:linuxcnc/configs/sim/tklinuxcnc/tripodsim.hal",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/tripod.ini:37:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
|
|
"src:resource:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini:0:directory_member:linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-gremlin.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:10:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:11:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/gladevcp_lib",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:18:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:26:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:6:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:6:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:6:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/gladevcp/gladevcp-touchy.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:7:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini:8:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/gladevcp-touchy.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:11:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:11:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/gladevcp/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:19:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:27:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:5:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:6:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini:9:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/gladevcp/touchy-gremlin.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:112:ini:APPLICATIONS:APP:linuxcnc/configs/sim/touchy/ngcgui/hwsim.sh",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:21:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:33:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:42:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:5:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:106:ini:APPLICATIONS:APP:linuxcnc/configs/sim/touchy/ngcgui/hwsim.sh",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:25:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:33:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/ngcgui/sim-lathe.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:34:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/lathe",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:34:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:3:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:43:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:53:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:5:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:113:ini:APPLICATIONS:APP:linuxcnc/configs/sim/touchy/ngcgui/hwsim.sh",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:114:ini:APPLICATIONS:APP:linuxcnc/configs/sim/touchy/ngcgui/moveoff_gui ",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:21:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:22:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:24:ini:RS274NGC:SUBROUTINE_PATH:linuxcnc/nc_files/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:26:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/ngcgui/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:34:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:35:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/ngcgui/LIB:hookup_moveoff.tcl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:5:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini:7:ini:DISPLAY:EMBED_TAB_COMMAND:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/gremlin_view.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/hitcounter.py",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/lathe.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/manual-example.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/manual-example.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/sim.tbl",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/gladevcp-touchy.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-gremlin.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy-misc.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:0:directory_member:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_popupkeyboard.ui",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:12:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/touchy/sim.var",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:17:ini:HAL:HALFILE:linuxcnc/configs/sim/touchy/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:18:ini:HAL:HALCMD:linuxcnc/configs/sim/touchy/touchy_test_panel.glade",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:19:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/touchy/touchy_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:7:ini:DISPLAY:PROGRAM_PREFIX:linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:8:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/touchy/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/touchy/touchy.ini:92:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/simpockets.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:28:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:29:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:43:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:44:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:46:ini:RS274NGC:SUBROUTINE_PATH:nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:62:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:63:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker.ini:64:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:23:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:25:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:27:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:28:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:51:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:52:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:54:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/examples/remap-subroutines",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:54:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:54:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/remap_lib",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:6:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:73:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:74:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini:75:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:29:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:47:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:49:ini:RS274NGC:SUBROUTINE_PATH:nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:67:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated_home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini:68:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:71:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:72:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:74:ini:RS274NGC:SUBROUTINE_PATH:nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:89:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/woodpecker/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:91:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:92:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini:93:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:60:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:61:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:63:ini:RS274NGC:SUBROUTINE_PATH:/home/.../linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:63:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:63:ini:RS274NGC:SUBROUTINE_PATH:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:64:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/metric_parameters.txt",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:77:ini:TRAJ:POSITION_FILE:linuxcnc/configs/sim/woodpecker/position.txt",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:80:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:81:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini:82:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:24:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:26:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:29:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:31:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:46:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:47:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:49:ini:RS274NGC:SUBROUTINE_PATH:nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:65:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:66:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini:67:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/1280x1024_5axis/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/compensate.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/core_sim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/gantrysim-xyzab.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/WoodPecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/help_files/images/lcnc_swoop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/mpg.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/numstr.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/on_abort.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/remap.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/stdglue.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/python/toplevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/qtvcp/screens/woodpecker/resources.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/simulated-gantry-xyzab-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ball_end_mill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/ballend_straight.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/center_drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/chamfer-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/drill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/endmill.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/gauge.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/chamfer-90-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-1.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-3.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-4.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-5.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-6.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-7.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/mill_tools/endmill-8.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/not_found.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_downcut_2F.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/spiral_upcut.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/surfacing.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/tapered_ball_end.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/upcut_spiral.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-60.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/tool_icons/vbit-90deg.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Left_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_actionButton.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_basicProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_calculator.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileDialog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_fileManager.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_focusOverlay.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_gcodeGraphics.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_ledWidget.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_machineLog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_macro.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_mdiTouchy.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_nurbsEditor.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_offsetpage.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_runFromLine.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolChange.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_toolOffset.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/qtvcp_versaProbe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/QTvcp Widgets_files/statusImageSwitcher.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/Right_arrow.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/a_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/atc_spindle_tool.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/brushed_metal.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/checked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/clear.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/configure-2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/dimensions.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/exit_application.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/extra_probe_depth.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/fullscreen_preview.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/linuxcnc-wizard.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_xy_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/max_z_distance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/rabbit_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_0.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_45.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/raster_90.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_fwd.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_pause.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_rev.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/spindle_stop.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/step_off_width.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/tool_probe.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/turtle_jog.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/unchecked.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/woodpecker2.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/x_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/xy_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_d.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/y_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_clearance.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_minus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/images/z_plus_jog_button.png",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_/woodpecker_handler.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_postgui.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.py",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/configs/sim/woodpecker/zlevel.ui",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:0:directory_member:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:27:ini:DISPLAY:INTRO_GRAPHIC:linuxcnc/configs/sim/woodpecker/linuxcnc.gif",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:29:ini:DISPLAY:PROGRAM_PREFIX:~/linuxcnc/nc_files",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:32:ini:DISPLAY:MDI_HISTORY_FILE:linuxcnc/configs/sim/woodpecker/mdi_history.dat",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:34:ini:DISPLAY:LOG_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.log",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:49:ini:EMCIO:TOOL_TABLE:linuxcnc/configs/sim/woodpecker/tool.tbl",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:50:ini:RS274NGC:PARAMETER_FILE:linuxcnc/configs/sim/woodpecker/woodpecker.var",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:52:ini:RS274NGC:SUBROUTINE_PATH:nc_files/probe/basic_probe/macros",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:5:ini:DISPLAY:PREFERENCE_FILE_PATH:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:68:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/gantrysim.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:69:ini:HAL:HALFILE:linuxcnc/configs/sim/woodpecker/simulated-gantry-home.hal",
|
|
"src:resource:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini:70:ini:HAL:POSTGUI_HALFILE:linuxcnc/configs/sim/woodpecker/woodpecker_postgui_ya.hal",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:105:function:tofile",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:108:function:tofilename",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:37:class:BitFile",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:49:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:51:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:53:function:__delitem__",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:56:function:chunkorder",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:63:function:fromstring",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:84:function:fromfile",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:88:function:fromfilename",
|
|
"src:symbol:linuxcnc/lib/python/bitfile.py:91:function:tostring",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:102:class:Entry",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:103:function:invoke",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:106:class:Label",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:107:function:setfocus",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:110:class:Button",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:112:class:ArrowButton",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:114:class:ProgressBar",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:116:class:ScrollView",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:118:class:Separator",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:122:class:_Frame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:123:function:getframe",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:127:class:_Items",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:128:function:itemcget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:131:function:itemconfigure",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:142:class:MainFrame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:143:function:addindicator",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:147:function:getindicator",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:151:function:getmenu",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:155:function:setmenustate",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:158:function:showstatusbar",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:161:function:showtoolbar",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:164:class:LabelFrame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:165:function:align",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:168:class:TitleFrame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:170:class:PanelFrame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:172:class:ScrolledWindow",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:173:function:setwidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:176:class:ScrollableFrame",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:177:function:see",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:182:function:xview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:185:function:yview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:188:class:PanedWindow",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:189:function:add",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:193:function:getframe",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:197:class:ButtonBox",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:198:function:add",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:202:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:205:function:index",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:208:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:212:function:invoke",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:215:function:setfocus",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:218:class:PagesManager",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:219:function:add",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:223:function:compute_size",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:226:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:229:function:getframe",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:233:function:pages",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:236:function:raise_page",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:241:class:NoteBook",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:242:function:bindtabs",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:245:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:248:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:252:function:move",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:255:function:see",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:258:function:raise_page",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:264:class:Dialog",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:265:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:270:function:enddialog",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:273:function:withdraw",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:276:class:StatusBar",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:278:class:LabelEntry",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:280:class:ComboBox",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:281:function:bind_entry",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:284:function:getlistbox",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:295:function:getvalue",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:298:function:post",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:301:function:setvalue",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:304:function:unpost",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:307:class:SpinBox",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:308:function:bind_entry",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:311:function:setvalue",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:314:function:getvalue",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:317:class:Tree",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:318:function:bind_image",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:321:function:bind_text",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:324:function:closetree",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:327:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:330:function:edit",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:334:function:exists",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:337:function:index",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:340:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:344:function:move",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:347:function:nodes",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:350:function:opentree",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:353:function:parent",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:356:function:reorder",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:359:function:see",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:362:function:selection_add",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:365:function:selection_clear",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:368:function:selection_get",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:36:function:returnswidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:371:function:selection_includes",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:374:function:selection_remove",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:377:function:selection_set",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:37:function:w",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:380:function:selection_toggle",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:383:function:toggle",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:386:function:visible",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:389:function:xview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:392:function:yview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:395:class:ListBox",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:396:function:bind_image",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:399:function:bind_text",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:402:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:405:function:edit",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:409:function:exists",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:412:function:index",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:415:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:419:function:items",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:422:function:move",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:425:function:reorder",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:428:function:see",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:431:function:selection_add",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:434:function:selection_clear",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:437:function:selection_get",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:43:function:makeswidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:440:function:selection_includes",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:443:function:selection_remove",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:446:function:selection_set",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:449:function:selection_toggle",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:44:function:w",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:452:function:xview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:455:function:yview",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:458:class:MessageDialog",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:459:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:463:class:ProgressDialog",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:464:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:468:class:PasswordDialog",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:469:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:473:class:SelectFont",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:474:class:SelectColor",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:475:function:setcolor",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:478:function:SelectColorMenu",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:53:function:nametowidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:83:function:makewidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:94:class:BWidget",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:95:function:_require",
|
|
"src:symbol:linuxcnc/lib/python/bwidget.py:97:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/__init__.py:16:function:excluded_filename",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1020:function:on_xpym1_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1066:function:on_xmyp1_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1113:function:on_xmym1_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1159:function:on_xy_hole_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1253:function:on_angle_yp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:128:function:error_poll",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1300:function:on_angle_ym_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1346:function:on_angle_xp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1392:function:on_angle_xm_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1439:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:1553:function:get_handlers",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:158:function:calc_cross_rott",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:167:function:rott_point",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:183:function:rott00_point",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:191:function:probed_position_with_offsets",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:216:function:on_chk_set_zero_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:222:function:on_chk_auto_rott_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:228:function:set_zerro",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:247:function:rotate_coord_system",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:268:function:on_spbtn1_search_vel_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:276:function:on_spbtn1_probe_vel_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:283:function:on_spbtn1_probe_max_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:290:function:on_spbtn1_probe_latch_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:297:function:on_spbtn1_probe_diam_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:304:function:on_spbtn1_xy_clearance_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:311:function:on_spbtn1_edge_lenght_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:318:function:on_spbtn1_z_clearance_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:325:function:on_spbtn_offs_x_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:332:function:on_spbtn_offs_y_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:339:function:on_spbtn_offs_z_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:346:function:on_spbtn_offs_angle_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:353:function:on_spbtn1_search_vel_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:358:function:on_spbtn1_probe_vel_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:363:function:on_spbtn1_probe_max_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:368:function:on_spbtn1_probe_latch_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:374:function:on_spbtn1_probe_diam_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:379:function:on_spbtn1_xy_clearance_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:384:function:on_spbtn1_edge_lenght_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:389:function:on_spbtn1_z_clearance_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:38:class:ps_preferences",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:394:function:on_spbtn_offs_x_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:399:function:on_spbtn_offs_y_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:404:function:on_spbtn_offs_z_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:409:function:on_spbtn_offs_angle_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:414:function:gcode",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:424:function:ocode",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:437:function:z_clearance_down",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:446:function:z_clearance_up",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:455:function:lenght_x",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:468:function:lenght_y",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:483:function:on_btn1_set_x_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:490:function:on_btn1_set_y_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:497:function:on_btn1_set_z_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:504:function:on_btn1_set_angle_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:530:function:on_down_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:541:function:on_xp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:54:function:getpref",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:570:function:on_yp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:599:function:on_xm_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:628:function:on_ym_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:659:function:on_xpyp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:68:function:putpref",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:710:function:on_xpym_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:73:class:ProbeScreenClass",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:75:function:get_preference_file_path",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:760:function:on_xmyp_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:811:function:on_xmym_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:862:function:on_xy_center_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:89:function:get_display",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:96:function:add_history",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/builtin-panels/versa-probe/versa_probe_screen.py:974:function:on_xpyp1_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:106:function:num_pad_only",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:125:function:integer_entry_only",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:132:function:set_editable",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:136:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:140:function:set_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:152:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:162:function:get_preset_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:165:function:compute",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:206:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:210:function:displayOperand",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:224:function:displayText_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:227:function:displayText",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:231:function:displayClr",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:234:function:displayBackspace",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:244:function:displayLeftBracket",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:247:function:displayRightBracket",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:250:function:displaySeven",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:253:function:displayEight",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:256:function:displayNine",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:259:function:displayFour",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:262:function:displayFive",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:265:function:displaySix",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:268:function:displayOne",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:271:function:displayTwo",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:274:function:displayThree",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:277:function:displayZero",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:280:function:displayDot",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:283:function:displayPi",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:286:function:displayDiv",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:289:function:displayMultiply",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:292:function:displayMinus",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:295:function:displayEqual",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:298:function:displayAdd",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:301:function:displayMmInch",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:305:function:displayInchMm",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:309:function:on_ok_button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:313:function:on_cancel_button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:317:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:324:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:335:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:37:class:Calculator",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/calculatorwidget.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:105:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:271:function:_on_eventbox_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:281:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:289:function:convert_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:294:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:347:function:_get_current_system",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:357:function:_get_current_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:366:function:_set_labels",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:386:function:set_style",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:431:function:_user_system_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:434:function:_position",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:491:function:_not_all_homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:502:function:_all_homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:509:function:_homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:50:class:Combi_DRO",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:519:function:set_to_inch",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:534:function:set_auto_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:546:function:set_to_diameter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:561:function:toggle_readout",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:590:function:change_axisletter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:602:function:set_joint_no",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:612:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:623:function:get_order",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:635:function:set_order",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:651:function:get_position",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:671:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/combi_dro.py:703:function:clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:23:class:Info",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:27:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:41:class:Status",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:55:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:60:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:76:class:Action",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/core.py:80:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:135:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:142:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:193:function:set_style",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:220:function:rgba_to_hex",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:225:function:str_to_rgba",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:230:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:253:function:position",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:294:function:_homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:309:function:set_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:313:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:317:function:set_to_inch",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:320:function:set_to_mm",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:323:function:set_to_diameter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:326:function:set_to_radius",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:329:function:set_style",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:357:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:46:class:HAL_DRO",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/drowidget.py:79:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:10:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:13:function:get_object",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:16:function:get_objects",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:19:function:connect_signals",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:22:function:widget_name",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gladebuilder.py:8:class:GladeBuilder",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:112:function:SET_MACHINE_UNHOMED",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:125:function:SET_AUTO_MODE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:130:function:TOGGLE_LIMITS_OVERRIDE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:142:function:SET_MDI_MODE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:145:function:SET_MANUAL_MODE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:156:function:CALL_MDI_LIST",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:165:function:CALL_MDI",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:170:function:CALL_MDI_WAIT",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:194:function:CALL_INI_MDI",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:208:function:CALL_OWORD",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:241:function:UPDATE_VAR_FILE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:245:function:OPEN_PROGRAM",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:269:function:SAVE_PROGRAM",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:26:class:_Lcnc_Action",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:27:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:314:function:SET_AXIS_ORIGIN",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:325:function:SET_TOOL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:337:function:SET_DIRECT_TOOL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:347:function:RUN",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:356:function:STEP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:364:function:ABORT",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:367:function:PAUSE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:374:function:SET_MAX_VELOCITY_RATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:377:function:SET_RAPID_RATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:380:function:SET_FEED_RATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:383:function:SET_SPINDLE_RATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:386:function:SET_JOG_RATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:389:function:SET_JOG_RATE_ANGULAR",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:38:function:SET_ESTOP_STATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:392:function:SET_JOG_INCR",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:398:function:SET_JOG_INCR_ANGULAR",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:404:function:SET_SPINDLE_ROTATION",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:407:function:SET_SPINDLE_FASTER",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:427:function:SET_SPINDLE_SLOWER",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:447:function:SET_SPINDLE_STOP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:44:function:SET_MACHINE_STATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:450:function:SET_USER_SYSTEM",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:458:function:ZERO_G92_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:462:function:ZERO_ROTATIONAL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:466:function:ZERO_G5X_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:476:function:RECORD_CURRENT_MODE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:481:function:RESTORE_RECORDED_MODE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:484:function:SET_SELECTED_JOINT",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:490:function:SET_SELECTED_AXIS",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:498:function:DO_JOG",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:50:function:SET_MOTION_TELEOP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:520:function:JOG",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:532:function:STOP_JOG",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:537:function:TOGGLE_FLOOD",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:540:function:SET_FLOOD_ON",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:543:function:SET_FLOOD_OFF",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:546:function:TOGGLE_MIST",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:549:function:SET_MIST_ON",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:552:function:SET_MIST_OFF",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:555:function:RELOAD_TOOLTABLE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:558:function:TOGGLE_OPTIONAL_STOP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:561:function:SET_OPTIONAL_STOP_ON",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:564:function:SET_OPTIONAL_STOP_OFF",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:567:function:TOGGLE_BLOCK_DELETE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:570:function:SET_BLOCK_DELETE_ON",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:573:function:SET_BLOCK_DELETE_OFF",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:576:function:RELOAD_DISPLAY",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:579:function:SET_GRAPHICS_VIEW",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:591:function:SET_GRAPHICS_GRID_SIZE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:594:function:ADJUST_GRAPHICS_PAN",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:597:function:ADJUST_GRAPHICS_ROTATE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:600:function:SHUT_SYSTEM_DOWN_PROMPT",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:616:function:SHUT_SYSTEM_DOWN_NOW",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:61:function:SET_MACHINE_HOMING",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:620:function:UPDATE_MACHINE_LOG",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:625:function:SET_LATHE_MIRROR_X",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:632:function:UNSET_LATHE_MIRROR_X",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:640:function:SET_DISPLAY_MESSAGE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:644:function:SET_ERROR_MESSAGE",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:654:function:get_jog_info",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:659:function:jnum_check",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:674:function:ensure_mode",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:685:function:open_filter_program",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:692:function:_load_filter_result",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:703:function:_mktemp",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:712:function:change_mode_after",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:716:function:command_stopped",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:730:function:generate_list",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:745:function:read_stdout",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:750:function:read_stderror",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:755:function:parse_line",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:772:function:touchoff_started",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:775:function:touchoff_finished",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:781:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:784:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:790:class:Progress",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:791:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:798:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:805:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:808:function:nextphase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:814:function:done",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:818:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:836:class:FilterProgram",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:837:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:858:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:882:function:finish",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:897:function:error",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/gtk_action.py:920:function:mess",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:101:function:safe_handler",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:102:function:_f",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:108:function:set_active_safe",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:113:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:127:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:143:class:_EMC_Action",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:145:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:150:function:set_active_safe",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:152:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:155:class:_EMC_ToggleAction",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:157:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:165:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:168:class:_EMC_RadioAction",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:170:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:175:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:180:class:EMC_Stat",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:182:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:186:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:189:function:_action",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:190:class:_C",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:192:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:202:class:EMC_ToggleAction_ESTOP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:204:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:212:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:220:class:EMC_ToggleAction_Power",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:222:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:233:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:241:class:EMC_RadioAction_ESTOP",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:243:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:250:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:253:class:EMC_RadioAction_ESTOP_RESET",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:255:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:262:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:265:class:EMC_RadioAction_ON",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:267:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:276:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:279:class:EMC_RadioAction_OFF",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:281:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:290:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:293:function:running",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:297:function:ensure_mode",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:306:class:EMC_Action_Python",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:322:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:337:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:350:class:EMC_Action_Run",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:357:function:set_restart_line",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:361:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:366:class:EMC_Action_Step",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:368:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:375:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:379:class:EMC_Action_Pause",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:37:class:_EMCStaticHolder",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:381:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:389:class:EMC_Action_Resume",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:38:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:391:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:401:class:EMC_Action_Stop",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:403:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:407:class:EMC_ToggleAction_Run",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:413:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:429:function:file_loaded_check",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:432:function:set_restart_line",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:436:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:440:class:EMC_ToggleAction_Stop",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:442:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:44:function:get",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:456:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:460:class:EMC_ToggleAction_Pause",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:462:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:481:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:487:class:HalTemplate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:490:class:FloatComp",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:491:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:493:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:497:class:EMC_Action_MDI",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:501:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:510:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:516:class:EMC_ToggleAction_MDI",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:51:class:_EMCStatic",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:524:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:528:function:on_toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:536:function:wait_complete",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:53:function:get",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:544:class:EMC_Action_UnHome",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:548:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:556:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:561:function:prompt_areyousure",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:56:class:_EMC_ActionBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:575:class:EMC_Action_Home",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:581:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:589:function:homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:596:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:607:class:State_Sensitive_Table",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:616:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:63:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:71:function:machine_on",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:75:function:is_auto_mode",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:80:function:is_file_loaded",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:88:function:is_all_homed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_actions.py:98:function:no_home_required",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:100:function:text_at",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:114:function:_expose_prepare",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:135:function:set_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:157:function:_load_gradient",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:180:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:187:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:210:function:set_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:214:function:set_target_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:218:function:get_value_diff",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:222:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:228:class:HAL_HBar",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:232:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:299:class:HAL_VBar",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:303:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:33:function:Gdk_color_tuple",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:38:class:HAL_Bar",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_bar.py:85:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:101:function:get_scaled_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:105:function:get_delta_scaled_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:108:function:set_label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:111:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:127:function:button_press",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:144:function:button_release",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:156:function:_scroll",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:169:function:start_drag",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:188:function:motion_notify",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:192:function:emit_count_changed_signal",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:230:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:309:function:redraw_canvas",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:318:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:326:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:355:function:count_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:359:function:scale_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:35:class:Hal_Dial",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:363:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:62:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:93:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_dial.py:97:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:105:function:mktemp",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:111:function:load_file",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:123:function:_load_file",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:131:function:refilter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:136:function:load_filters",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:142:function:get_filter_program",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:149:function:_load_filters",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:150:function:_e2p",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:169:class:EMC_FileChooserDialog",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:171:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:176:function:on_response",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:180:class:EMC_FileChooserButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:182:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:187:function:on_file_set",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:190:class:EMC_Action_Open",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:194:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:201:function:_load_filters",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:203:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:219:class:EMC_Action_Reload",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:221:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:224:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:35:class:FilterProgram",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:56:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:73:function:finish",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:86:function:error",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:97:class:_EMC_FileChooser",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_filechooser.py:98:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:112:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:116:function:tick_poll",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:129:function:snapshot",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:137:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:181:function:t2x",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:237:function:text_at",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:251:function:draw_graph",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:269:function:draw_xticks",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:281:function:draw_yticks",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:304:function:time_string",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:311:function:time_strings_clean",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:315:function:set_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:319:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:326:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:34:function:Gdk_color_tuple",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:39:function:mround",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:49:class:HAL_Graph",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_graph.py:90:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:115:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:139:function:reloadfile",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:146:function:fileloaded",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:155:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:164:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:191:function:dro_format",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:273:function:update_highlight_variable",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:279:function:realize",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:283:function:_load",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:286:function:report_gcode_error",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:46:function:get_linuxcnc_ini_file",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin.py:61:class:HAL_Gremlin",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:106:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:114:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:123:function:go_gremlin_view",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:131:function:remove_unwanted_label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:136:function:start_GremlinView",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:45:class:HAL_GremlinPlus",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_gremlin_plus.py:88:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:144:function:do_enter_notify_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:147:function:do_leave_notify_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:151:function:do_button_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:179:function:do_button_release_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:198:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:208:function:set_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:227:function:modify_hsv_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:304:function:update_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:313:function:update_widget_size",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:324:function:set_active",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:327:function:get_active",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:330:function:set_light_on",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:333:function:get_light_on",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:336:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:341:function:set_on_text",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:348:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:355:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:372:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:390:function:button_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:392:function:enable_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:394:function:light_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:52:class:HAL_LightButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_lightbutton.py:97:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:128:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:151:function:submit",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:202:function:select",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:210:function:on_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:255:function:on_button_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:268:function:load_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:270:function:load_status",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:272:function:load_halshow",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:278:function:_get_iter_last",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:286:function:_change_font_entry",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:291:function:_change_font_tree",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:297:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:305:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:323:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:53:class:EMC_MDIHistory",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_mdihistory.py:75:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:113:function:set_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:137:function:angle",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:176:function:draw_zone",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:184:function:draw_tick",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:192:function:text_at",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:206:function:draw_arrow",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:217:function:set_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:221:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:228:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:254:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:31:function:Gdk_color_tuple",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:36:class:HAL_Meter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:76:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:88:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_meter.py:94:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:102:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:112:function:go_ngcgui",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:121:function:start_NgcGui",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:36:class:PyNgcGui",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:79:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_pyngcgui.py:94:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:106:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:113:function:set_language",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:124:function:set_style_scheme",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:129:function:get_filename",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:137:function:load_file",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:158:function:line_down",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:165:function:line_up",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:170:function:get_line_number",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:174:function:set_line_number",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:179:function:check_offset",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:185:function:highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:200:function:button_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:208:function:update_iter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:217:function:modified_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:227:function:text_search",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:272:function:replace_text_search",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:289:function:undo",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:294:function:redo",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:298:function:safe_write",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:313:class:EMC_Action_Save",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:318:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:322:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:325:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:330:function:save",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:336:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:343:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:351:class:EMC_Action_SaveAs",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:357:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:362:function:on_activate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:41:class:EMC_SourceView",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:51:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:85:function:add_mark_category",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:92:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_sourceview.py:99:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:101:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:115:class:_HalSpeedControlBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:116:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:120:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:124:class:HAL_HBox",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:128:class:HAL_Table",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:132:class:HAL_HideTable",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:136:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:140:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:147:class:HAL_ComboBox",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:154:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:161:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:168:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:173:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:183:class:HAL_Button",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:186:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:188:function:_f",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:194:class:HALIO_Button",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:197:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:200:function:_f",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:206:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:210:class:HAL_CheckButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:213:class:HAL_SpinButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:216:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:221:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:227:class:HAL_RadioButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:230:class:HAL_ToggleButton",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:233:class:HAL_HScale",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:237:class:HALIO_HScale",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:241:class:HAL_VScale",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:244:class:HAL_ProgressBar",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:266:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:273:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:27:class:_HalWidgetBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:280:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:289:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:28:function:hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:325:class:HAL_Label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:336:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:33:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:343:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:351:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:37:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:41:class:_HalToggleBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:42:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:48:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:53:class:_HalScaleBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:54:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:59:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:63:class:_HalIOScaleBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:64:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:70:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:81:class:_HalSensitiveBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:82:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:87:class:_HalJogWheelBase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/hal_widgets.py:88:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:255:function:_init_button_state",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:266:function:_button_press",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:273:function:_on_activate_cursor_item",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:276:function:_get_icon",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:288:function:_create_store",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:292:function:_fill_store",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:365:function:check_button_state",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:393:function:state_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:406:function:show_buttonbox",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:412:function:show_filelabel",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:418:function:on_btn_home_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:422:function:on_btn_jump_to_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:426:function:get_iter_last",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:434:function:on_btn_sel_prev_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:457:function:on_btn_sel_next_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:508:function:set_icon_size",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:516:function:set_directory",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:520:function:set_filetypes",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:524:function:refresh_filelist",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:527:function:get_selected",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:530:function:on_btn_select_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:547:function:on_btn_exit_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:552:function:_on_item_activated",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:565:function:_on_selection_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:570:function:on_btn_dir_up_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:574:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:581:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:609:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:68:class:IconFileSelection",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/iconview.py:95:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:104:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:109:function:get_scaled_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:115:function:set_label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:119:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:147:function:_draw_frame",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:194:function:_draw_dot",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:202:function:_draw_arrow",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:236:function:_button_press",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:242:function:_button_release",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:246:function:_motion",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:262:function:_scroll",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:272:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:280:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:307:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:37:class:JogWheel",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:67:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/jogwheel.py:97:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:18:class:HAL_LED",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:283:function:set_active",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:287:function:set_sensitive",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:291:function:set_blink_rate",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:300:function:blink",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:315:function:set_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:337:function:set_dia",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:342:function:set_shape",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:346:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:355:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:384:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:53:function:post_create",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:56:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/led.py:80:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:109:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:132:function:submit",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:155:function:select",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:158:function:on_key_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:167:function:on_button_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:173:function:load_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:175:function:load_status",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:177:function:load_halshow",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:185:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:186:function:macro_callback",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:42:class:MacroSelect",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/macro_widget.py:48:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:35:class:GladePanel",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:36:function:on_window_destroy",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:41:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:60:function:get_handler_obj",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:63:function:set_handler",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:66:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:70:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/makepins.py:72:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:162:function:reload_offsets",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:220:function:set_filename",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:227:function:read_file",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:273:function:set_col_visible",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:286:function:set_row_visible",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:297:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:302:function:set_editing",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:323:function:col_editted",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:332:function:system_to_p",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:399:function:zero_g92",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:416:function:zero_rot",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:434:function:periodic_check",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:456:function:convert_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:464:function:color_parse",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:470:function:set_highlight_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:474:function:set_foreground_color",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:478:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:485:function:set_to_inch",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:489:function:set_to_mm",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:492:function:set_display_follows_program_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:495:function:set_display_independent_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:499:function:hide_buttonbox",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:506:function:mark_active",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:518:function:get_selected",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:528:function:on_selection_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:535:function:set_names",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:541:function:get_names",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:548:function:on_treeview2_button_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:54:class:OffsetPage",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:557:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:566:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:583:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:585:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:591:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetpage_widget.py:83:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:107:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:130:function:get_offsets",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:145:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:150:function:set_to_inch",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:154:function:set_to_mm",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:158:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:33:class:HAL_Offset",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:51:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:82:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/offsetwidget.py:90:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:106:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:128:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:136:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:146:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:28:class:Override",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:55:function:set_type",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/overridewidget.py:84:function:update_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:101:function:store_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:105:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:109:function:widget_defaults",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:125:class:IniFile",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:134:function:_gen_spec",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:152:function:restore_state",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:181:function:save_state",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:200:function:create_default_ini",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:214:function:read_ini",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:259:function:write",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:267:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:38:class:UselessIniError",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:41:class:BadDescriptorDictError",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:50:function:warn",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:54:function:dbg",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:60:function:set_debug",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:65:function:select_widgets",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/persistence.py:91:function:accessors",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:112:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:157:function:_update_widget",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:162:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:179:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:188:function:_draw_widget",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:254:function:set_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:265:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:270:function:_on_value_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:278:function:_on_scale_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:284:function:on_btn_plus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:288:function:on_btn_plus_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:298:function:increase",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:312:function:on_btn_minus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:316:function:on_btn_minus_released",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:326:function:decrease",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:340:function:_on_plus_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:347:function:_on_minus_changed",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:354:function:_convert_to_rgb",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:363:function:get_color_tuple",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:367:function:set_digits",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:375:function:set_adjustment",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:386:function:hide_button",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:38:class:SpeedControl",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:397:function:update_button",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:411:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:423:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/speedcontrol.py:464:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:32:class:State_Label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:52:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:60:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:66:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:73:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/state_label.py:82:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:31:class:Status_Label",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:43:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:47:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:59:function:update",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:65:function:_set_user_system_text",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:69:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:76:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/status_label.py:85:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:130:function:compare",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:177:function:match_type",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:184:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:186:function:match_value_cb",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:199:function:get_selected_tool",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:201:function:match_value_cb",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:213:function:set_selected_tool",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:217:function:match_tool",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:230:function:add",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:235:function:set_filename",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:239:function:warning_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:251:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:320:function:save",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:363:function:display_toggle",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:371:function:set_lathe_display",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:388:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:398:function:set_title_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:409:function:set_tab_font",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:41:class:ToolEdit",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:422:function:set_visible",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:428:function:set_col_visible",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:444:function:on_treeview2_button_press_event",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:454:function:col_editted",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:491:function:toggled",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:497:function:periodic_check",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:510:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:520:function:file_current_check",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:527:function:toolfile_stale",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:535:function:get_toolinfo",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:53:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:546:function:hide_buttonbox",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:553:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:564:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:586:function:on_tree_navigate_key_press",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/tooledit_widget.py:703:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/xembed.py:102:function:forward",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/xembed.py:12:function:reparent",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/xembed.py:43:function:add_plug",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/xembed.py:57:function:keyboard_forward",
|
|
"src:symbol:linuxcnc/lib/python/gladevcp/xembed.py:87:function:gtk2xlib",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:100:function:glRotateScene",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:101:function:snap",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:127:function:sub",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:130:function:dot",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:136:function:glDistFromLine",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:141:function:v3distsq",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:145:class:GlNavBase",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:148:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:187:function:basic_lighting",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:205:function:set_background",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:215:function:set_centerpoint",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:226:function:set_latitudelimits",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:241:function:set_eyepoint",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:247:function:set_eyepoint_from_extents",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:256:function:reset",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:266:function:recordMouse",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:270:function:startRotate",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:273:function:scale",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:292:function:rotate",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:301:function:translate",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:323:function:set_viewangle",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:330:function:get_viewangle",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:333:function:get_zoom_distance",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:337:function:set_zoom_distance",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:341:function:zoomin",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:345:function:zoomout",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:349:function:startZoom",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:353:function:continueZoom",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:358:function:getRotateMode",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:360:function:translateOrRotate",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:366:function:rotateOrTranslate",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:373:function:get_total_translation",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:376:function:set_view_x",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:388:function:set_view_y",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:402:function:set_view_y2",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:414:function:set_view_z",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:423:function:set_view_z2",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:434:function:set_view_p",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:85:function:pango_font_pre",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:8:function:use_pango_font",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:90:function:pango_font_post",
|
|
"src:symbol:linuxcnc/lib/python/glnav.py:93:function:glTranslateScene",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:111:function:warning_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:131:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:146:function:yesno_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:173:function:show_user_message",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:195:function:restart_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:199:function:restart_down",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:206:function:restart_up",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:213:function:on_enter_button",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:33:class:Dialogs",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:41:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:46:function:system_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/dialogs.py:73:function:entry_dialog",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:112:function:get_joint_axis_relation",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:175:function:get_trivial_kinematics",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:197:function:get_no_force_homing",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:203:function:get_position_feedback_actual",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:212:function:get_lathe",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:218:function:get_backtool_lathe",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:224:function:get_lathe_wear_offsets",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:230:function:get_jog_vel",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:244:function:get_max_jog_vel",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:253:function:get_default_ang_jog_vel",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:261:function:get_max_ang_jog_vel",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:269:function:get_min_ang_jog_vel",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:277:function:get_default_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:285:function:get_max_spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:293:function:get_min_spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:300:function:get_max_feed_override",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:307:function:get_embedded_tabs",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:329:function:get_parameter_file",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:335:function:get_program_prefix",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:347:function:get_file_ext",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:362:function:get_increments",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:377:function:get_toolfile",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:383:function:get_tool_sensor_data",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:390:function:get_macros",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:40:class:GetIniInfo",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:419:function:get_subroutine_paths",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:429:function:get_axis_2_min_limit",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:42:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:436:function:get_RS274_start_code",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:442:function:get_user_messages",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:457:function:get_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:466:function:get_user_command_file",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:472:function:get_user_css_file",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:49:function:get_cycle_time",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:59:function:get_postgui_halfile",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:63:function:get_preference_file_path",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:77:function:get_coordinates",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:87:function:get_joints",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/getiniinfo.py:94:function:get_axis_list",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/icon_theme_helper.py:27:function:find_valid_icon_themes",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/icon_theme_helper.py:40:function:find_handler_id_by_signal",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/icon_theme_helper.py:45:function:load_symbolic_from_icon_theme",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:102:function:_show_message",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:175:function:add_message",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:196:function:del_first",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:205:function:del_last",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:217:function:del_message",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:241:function:_on_btn_close_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:246:function:_refill_messages",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:270:function:do_get_property",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:277:function:do_set_property",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:312:function:main",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:42:class:Notification",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/notification.py:78:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/player.py:43:class:Player",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/player.py:45:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/player.py:55:function:run",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/player.py:59:function:set_sound",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/player.py:63:function:on_message",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/preferences.py:18:class:preferences",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/preferences.py:27:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/preferences.py:34:function:getpref",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/preferences.py:48:function:putpref",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/widgets.py:28:class:Widgets",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/widgets.py:30:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/widgets.py:33:function:__getattr__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/widgets.py:39:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gmoccapy/widgets.py:45:function:__iter__",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:100:class:Gremlin",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:109:function:add_attribute",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:113:function:get_attributes",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:117:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:133:function:C",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:222:function:activate",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:228:function:swapbuffers",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:232:function:deactivate",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:235:function:winfo_width",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:238:function:winfo_height",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:241:function:reshape",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:249:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:256:function:_redraw",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:260:function:clear_live_plotter",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:263:function:map",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:266:function:poll",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:285:function:realize",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:305:function:set_current_view",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:310:function:load",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:344:function:from_internal_linear_unit",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:350:function:calculate_gcode_properties",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:351:function:dist",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:355:function:from_internal_units",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:441:function:get_program_alpha",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:442:function:get_num_joints",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:443:function:get_geometry",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:452:function:get_joints_mode",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:453:function:get_show_commanded",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:454:function:get_show_extents",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:455:function:get_gcode_properties",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:456:function:get_show_limits",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:457:function:get_show_live_plot",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:458:function:get_show_machine_speed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:459:function:get_show_metric",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:460:function:get_show_program",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:461:function:get_show_rapids",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:462:function:get_show_relative",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:463:function:get_show_tool",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:464:function:get_show_distance_to_go",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:465:function:get_grid_size",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:467:function:get_view",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:471:function:is_lathe",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:472:function:is_foam",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:473:function:get_current_tool",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:477:function:get_highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:479:function:get_a_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:480:function:get_b_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:481:function:get_c_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:483:function:get_font_info",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:486:function:get_show_offsets",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:488:function:select_prime",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:492:function:select_fire",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:498:function:select_cancel",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:501:function:pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:515:function:motion",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:615:function:scroll",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:620:function:report_gcode_error",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:628:function:zoom_in",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:631:function:zoom_out",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:634:function:start_continuous_zoom",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:637:function:continuous_zoom",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:640:function:set_mouse_start",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:643:function:set_prime",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:649:function:pan",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:652:function:rotate_view",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:76:class:DummyProgress",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:77:function:nextphase",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:78:function:progress",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:80:class:StatCanon",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:81:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:87:function:is_lathe",
|
|
"src:symbol:linuxcnc/lib/python/gremlin.py:89:function:change_tool",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:116:function:get_linuxcnc_ini_file",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:133:class:GremlinView",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:136:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:319:function:_periodic",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:370:function:preview_file",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:382:function:_gboxquit",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:385:function:_topwindowquit",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:389:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:392:function:on_zoomin_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:398:function:on_zoomout_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:404:function:on_pan_x_minus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:411:function:on_pan_x_plus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:418:function:on_pan_y_minus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:425:function:on_pan_y_plus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:432:function:on_clear_live_plotter_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:435:function:on_enable_dro_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:442:function:on_show_machine_speed_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:449:function:on_show_distance_to_go_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:456:function:on_show_limits_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:463:function:on_show_extents_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:470:function:on_show_tool_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:477:function:on_show_metric_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:484:function:on_select_p_view_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:487:function:on_select_x_view_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:490:function:on_select_y_view_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:493:function:on_select_z_view_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:496:function:on_select_z2_view_clicked",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:499:function:set_view_per_w",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:505:function:standalone_gremlin_view",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:509:function:usage",
|
|
"src:symbol:linuxcnc/lib/python/gremlin_view.py:99:function:ini_check",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:100:function:jogging",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:104:function:override_limits",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:109:function:spindle_forward",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:114:function:spindle_off",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:119:function:spindle_reverse",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:124:function:spindle_faster",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:129:function:spindle_slower",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:134:function:set_motion_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:140:function:continuous_jog_velocity",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:153:function:continuous_jog",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:169:function:stop_jog",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:16:class:emc_control",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:173:function:incremental_jog",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:186:function:quill_up",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:193:function:feed_hold",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:197:function:feed_override",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:201:function:rapid_override",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:205:function:spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:209:function:max_velocity",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:213:function:reload_tooltable",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:217:function:opstop",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:221:function:blockdel",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:225:function:abort",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:228:function:single_block",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:243:function:cycle_start",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:257:function:re_start",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:270:function:set_restart_line",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:274:function:set_manual_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:282:function:set_mdi_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:288:function:set_auto_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:294:function:get_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:298:function:is_machine_off",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:307:class:emc_status",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:308:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:319:function:get_feedrate",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:322:function:get_spindlerate",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:325:function:get_maxvelocity",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:328:function:dro_inch",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:331:function:dro_mm",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:334:function:set_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:340:function:convert_units_list",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:347:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:34:function:mask",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:353:function:get_linear_units",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:356:function:dro_commanded",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:359:function:dro_actual",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:362:function:get_current_tool",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:366:function:get_current_system",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:376:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:38:function:mdi_active",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:41:function:unmask",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:44:function:mist_on",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:48:function:mist_off",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:52:function:flood_on",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:56:function:flood_off",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:60:function:estop",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:64:function:estop_reset",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:68:function:machine_off",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:72:function:machine_on",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:76:function:home_all",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:82:function:unhome_all",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:88:function:home_selected",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/emc_interface.py:94:function:unhome_selected",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:104:function:add_conversion",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:16:class:Keycalls",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:32:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:34:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:40:class:Keybinding",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:41:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:56:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:58:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:66:class:Keylookup",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:67:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:71:function:get_call",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:78:function:get_binding",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:85:function:convert",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:92:function:add_binding",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/keybindings.py:98:function:add_call",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:101:function:get_words",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:118:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:121:function:set_word",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:124:function:set_polar",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:127:function:issue",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:151:function:set_tool_touchoff",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:161:function:set_axis_origin",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:169:function:go_to_position",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:177:function:set_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:185:function:set_user_system",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:193:function:index_tool",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:202:function:arbitrary_mdi",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:208:class:mdi_control",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:209:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:224:function:mdi_is_reading",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:230:function:set_mdi_mode",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:236:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:242:function:touchoff",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:248:function:set_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:251:function:go_to_position",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:254:function:set_user_system",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:261:function:index_tool",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:268:function:user_command",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:274:function:not_editing",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:278:function:editing",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:27:class:mdi",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:284:function:get_text",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:288:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:301:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:305:function:back",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:310:function:fill_out",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:320:function:next",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:325:function:ok",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:329:function:decimal",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:334:function:minus",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:344:function:keypad",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:349:function:gp",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:352:function:g",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:360:function:m",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:363:function:t",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:366:function:o",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:376:function:select",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:383:function:set_tool",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:397:function:set_origin",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:90:function:add_macros",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/mdi.py:98:function:get_description",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/preferences.py:19:class:preferences",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/preferences.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/preferences.py:35:function:getpref",
|
|
"src:symbol:linuxcnc/lib/python/gscreen/preferences.py:55:function:putpref",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:33:class:_ItemWrap",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:34:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:40:function:_item_wrap",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:45:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:54:class:Pin",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:55:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:60:class:Param",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:61:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:66:class:component",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:67:function:newpin",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:68:function:newparam",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:70:function:getpin",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:71:function:getparam",
|
|
"src:symbol:linuxcnc/lib/python/hal.py:72:function:getpins",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1000:function:get_max_velocity",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1003:function:set_selected_joint",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1007:function:get_selected_joint",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1010:function:set_selected_axis",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1014:function:get_selected_axis",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1017:function:is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1021:function:is_all_homed",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1024:function:is_homing",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1030:function:machine_is_on",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1033:function:estop_is_clear",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1037:function:is_man_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1041:function:is_mdi_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1045:function:is_auto_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1049:function:is_on_and_idle",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1053:function:is_auto_running",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1057:function:is_auto_paused",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1060:function:is_interp_running",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1064:function:is_interp_paused",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1068:function:is_interp_reading",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1072:function:is_interp_waiting",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1076:function:is_interp_idle",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1080:function:is_file_loaded",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1087:function:is_metric_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1090:function:is_spindle_on",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1094:function:get_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1098:function:is_joint_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1105:function:is_world_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1112:function:is_status_valid",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1115:function:is_limits_override_set",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1118:function:is_hard_limits_tripped",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1121:function:get_current_tool",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1125:function:set_tool_touchoff",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1140:function:set_axis_origin",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1154:function:do_jog",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1168:function:get_jjogmode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1177:function:jnum_for_axisnum",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1192:function:get_jog_info",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1198:function:get_probed_position",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1202:function:get_probed_position_with_offsets",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1218:function:_rott00_point",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1226:function:shutdown",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1229:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1231:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1234:class:GStat",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:1236:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:247:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:274:function:set_timer",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:277:function:merge",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:35:class:GPin",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:401:function:update",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:42:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:50:function:update",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:57:function:update_all",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:72:function:update_start",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:739:function:forced_update",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:79:function:update_stop",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:82:class:GComponent",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:83:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:88:function:newpin",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:899:function:get_position",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:89:function:getpin",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:91:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:939:function:check_for_modes",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:93:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:940:function:running",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:94:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:952:function:get_current_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:955:function:get_previous_mode",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:959:function:set_jograte",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:963:function:get_jograte",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:966:function:set_jograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:96:class:_GStat",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:970:function:get_jograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:973:function:get_jog_increment_angular",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:976:function:set_jog_increment_angular",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:987:function:set_jog_increments",
|
|
"src:symbol:linuxcnc/lib/python/hal_glib.py:997:function:get_jog_increment",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:120:function:plot_digit",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:126:function:plot_string",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:162:function:string_len",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:174:function:center_string",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:25:class:Hershey",
|
|
"src:symbol:linuxcnc/lib/python/hershey.py:26:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:102:function:mapcode",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:111:class:Event",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:115:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:123:function:read",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:131:function:write",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:148:function:__repr__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:20:function:SZ",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:22:function:get_name",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:26:function:get_phys",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:31:function:get_uniq",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:35:function:get_bits",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:59:function:get_keys",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:62:class:InputId",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:65:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:70:function:get",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:733:function:i",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:74:function:__repr__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:755:function:invert",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:768:function:humanize",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:770:function:maybe_int",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:775:function:find",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:77:class:AbsInfo",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:80:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:845:function:decode",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:850:class:InputDevice",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:851:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:863:function:fileno",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:864:function:readable",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:868:function:get_bits",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:869:function:get_absinfo",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:86:function:__repr__",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:870:function:read_event",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:878:function:write_event",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:91:function:get",
|
|
"src:symbol:linuxcnc/lib/python/linux_event.py:96:function:set",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:105:function:wait_for_axis_to_stop",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:12:class:LinuxCNC_Exception",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:134:function:jog_axis",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:16:class:LinuxCNC",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:197:function:wait_for_axis_to_stop_at",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:21:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:236:function:wait_for_interp_state",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:263:function:wait_for_tool_in_spindle",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:37:function:wait_for_linuxcnc_startup",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:68:function:all_joints_homed",
|
|
"src:symbol:linuxcnc/lib/python/linuxcnc_util.py:84:function:wait_for_home",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:21:class:MultiFileBuilder",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:22:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:26:function:set_translation_domain",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:29:function:connect_signals",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:32:function:add_from_file",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:39:function:add_from_string",
|
|
"src:symbol:linuxcnc/lib/python/multifilebuilder.py:46:function:get_object",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:101:function:find_prefix",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:111:function:source_lib_tcl",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:114:function:start",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:23:class:_Emptyclass",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:25:function:newinstance",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:32:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:36:class:TclCommands",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:43:class:Variables",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:44:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:48:class:Widgets",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:49:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:53:function:makecommand",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:62:function:makevar",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:73:function:makebool",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:75:function:makeint",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:77:function:makefloat",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:79:function:makestring",
|
|
"src:symbol:linuxcnc/lib/python/nf.py:82:function:makewidget",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/block.py:232:function:scale_shape",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/block.py:43:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/bolt_circle.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/circle.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/ellipse.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/gusset.py:250:function:get_offset_coordinates",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/gusset.py:267:function:get_angle",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/gusset.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:100:function:do_arc_3_points",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:167:function:do_arc_2_points_radius",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:218:function:do_arc_by_angle_radius",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:257:function:first_segment",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:283:function:next_segment",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:295:function:last_segment",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:39:function:do_line_point_to_point",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/line.py:68:function:do_line_by_angle",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/polygon.py:200:function:get_points",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/polygon.py:209:function:get_offset",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/polygon.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/rectangle.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/run_from_line.py:207:function:run_from_line_set",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/run_from_line.py:24:function:run_from_line_get",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/run_from_line.py:295:function:set_leadin_coordinates",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/run_from_line.py:309:function:set_spindle_start",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/run_from_line.py:328:function:get_rfl_pos",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/sector.py:192:function:get_offset_coordinates",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/sector.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/slot.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/star.py:200:function:get_points",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/star.py:213:function:get_offset",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/star.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/triangle.py:281:function:get_offset_coordinates",
|
|
"src:symbol:linuxcnc/lib/python/plasmac/triangle.py:37:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1036:function:write_gs2_vfd",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1061:function:write_mitsub_vfd",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1068:function:write_readme",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1140:function:build_pid",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1206:function:connect_joint",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1207:function:get",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1561:function:connect_input",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1564:function:write_pins",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1656:function:connect_output",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1659:function:write_pins",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1820:function:qtplasmac_connections",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1951:function:qtplasmac_prefs",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1952:function:putPrefs",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1978:function:plasmac_ohmic_sense",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1984:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:1986:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:27:class:HAL",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:41:function:write_halfile",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_HAL.py:42:function:writebackup",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:14:function:write_inifile",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:391:function:write_one_joint",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:392:function:get",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:4:class:INI",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:539:function:write_one_axis",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:542:function:get",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:563:function:find_limits",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:564:function:get",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:576:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:578:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/build_INI.py:5:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:1084:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:1086:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:27:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:37:class:Data",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:38:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:733:function:set_axis_unit_defaults",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:777:function:load",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:779:function:str2bool",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:904:function:add_md5sum",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/data.py:907:function:save",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1018:function:mesa0_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1042:function:on_mesapanel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1045:function:on_mesa0_discovery_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1053:function:mesa1_init",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1059:function:mesa1_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1070:function:mesa1_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1094:function:on_mesa1_discovery_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1102:function:pport1_init",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1134:function:pport1_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1162:function:pport1_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1189:function:on_pp1_direction_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1195:function:on_pport_panel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1200:function:pport2_init",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1230:function:pport2_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1252:function:pport2_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1278:function:on_pp2_direction_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1284:function:on_parportpanel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1289:function:thcad_init",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1292:function:thcad_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1303:function:thcad_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1313:function:x_motor_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1320:function:x_motor_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1323:function:on_xcalculatescale_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1324:function:on_xaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1325:function:on_xaxistune_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1326:function:on_xaxis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1330:function:x_axis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1343:function:x_axis_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1348:function:y_motor_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1355:function:y_motor_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1358:function:on_ycalculatescale_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1359:function:on_yaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1360:function:on_yaxistune_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1361:function:on_yaxis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1365:function:y_axis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1377:function:y_axis_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:137:function:on_button_back_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1382:function:z_motor_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1389:function:z_motor_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1392:function:on_zcalculatescale_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1393:function:on_zaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1394:function:on_zaxistune_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1395:function:on_zaxis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1399:function:z_axis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1412:function:z_axis_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1417:function:a_motor_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1424:function:a_motor_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1427:function:on_acalculatescale_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1428:function:on_aaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1429:function:on_aaxistune_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1430:function:on_aaxis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1434:function:a_axis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1441:function:a_axis_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1446:function:s_motor_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1450:function:s_motor_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1453:function:on_scalculatescale_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1454:function:on_saxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1455:function:on_saxistune_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1456:function:on_saxis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1457:function:on_suseatspeed_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1458:function:on_suseoutputrange2_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1462:function:options_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1483:function:options_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1545:function:realtime_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1573:function:realtime_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1607:function:finished_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1609:function:finished_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1618:function:on_update_tune_params",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1620:function:on_tune_jogminus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1622:function:on_tune_jogminus_released",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1624:function:on_tune_jogplus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1626:function:on_tune_jogplus_released",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1628:function:on_tuneinvertmotor_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1634:function:update_oloop_params",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1636:function:on_oloop_enableamp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1638:function:on_oloop_jogminus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:163:function:set_buttons_sensitive",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1640:function:on_oloop_jogminus_released",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1642:function:on_oloop_jogplus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1644:function:on_oloop_jogplus_released",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1646:function:on_resetbutton_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1648:function:on_resetbutton_released",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1653:function:on_discovery_interface_combobox_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1657:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:1659:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:173:function:page_set_state",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:187:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:219:function:intro_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:221:function:intro_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:227:function:start_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:232:function:start_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:258:function:base_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:294:function:base_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:340:function:on_mesa_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:350:function:on_pp1_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:360:function:on_pp2_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:371:function:on_pp3_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:379:function:on_machinename_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:383:function:on_address_search_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:395:function:on_latency_test_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:400:function:latency_running_callback",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:407:function:on_calculate_ideal_period",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:416:function:on_units_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:41:class:Pages",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:425:function:screen_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:42:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:509:function:screen_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:570:function:on_loadladder_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:572:function:on_combo_screentype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:59:function:on_button_help_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:61:function:on_help_window_delete_event",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:635:function:on_halui_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:639:function:on_classicladder_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:64:function:on_print_7i76_button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:66:function:on_print_7i77_button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:674:function:on_xusecomp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:675:function:on_yusecomp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:676:function:on_zusecomp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:677:function:on_ausecomp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:678:function:on_xusebacklash_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:679:function:on_yusebacklash_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:680:function:on_zusebacklash_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:681:function:on_ausebacklash_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:683:function:on_xdrivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:684:function:on_ydrivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:685:function:on_zdrivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:686:function:on_adrivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:687:function:on_sdrivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:689:function:on_xbldc_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:68:function:on_button_save_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:690:function:on_ybldc_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:691:function:on_zbldc_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:692:function:on_abldc_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:693:function:on_sbldc_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:698:function:vcp_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:715:function:vcp_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:71:function:on_window1_destroy",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:762:function:on_gladevcp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:764:function:on_pyvcp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:777:function:on_displaypanel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:779:function:on_displaygladevcp_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:785:function:ubuttons_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:791:function:ubuttons_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:799:function:external_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:872:function:external_finish",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:88:function:on_button_fwd_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:923:function:on_addrule_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:926:function:on_joystickjog_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:932:function:on_externaljog_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:938:function:on_externalso_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:941:function:on_externalmvo_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:944:function:on_externalfo_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:947:function:on_externalmpg_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:950:function:on_spindle_vfd_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:954:function:on_external_options_toggled",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:971:function:on_joysearch_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:973:function:on_joysticktest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:976:function:search_for_serial_device_name",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:988:function:mesa0_init",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:994:function:mesa0_prepare",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/pages.py:996:function:lookup",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/private_data.py:1381:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/private_data.py:1383:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/private_data.py:28:class:Private_Data",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/private_data.py:29:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1066:function:update_axis_params",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1067:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1113:function:oloop_jogminus",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1116:function:oloop_jogplus",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1120:function:oloop_resetencoder",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1124:function:oloop_enableamp",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1130:function:hal_test_signals",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1142:function:write_pins",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1210:function:launch_mesa_panel",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1241:function:on_mesapanel_returned",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:124:function:testpanel",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1258:class:hal_interface",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1259:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1264:class:Data2",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1265:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1272:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1274:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1277:class:LED",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1279:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1295:function:expose",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1329:function:set_active",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1335:function:set_color",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1343:function:set_dia",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1347:class:PyApp",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1349:function:switch_callback",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1360:function:pwm_callback",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1370:function:stp_callback",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1378:function:quit",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1385:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1406:function:make_blank",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1416:function:make_enc",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1434:function:make_stp",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1453:function:make_pwm",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1477:function:make_led",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1493:function:make_switch",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:1511:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:155:function:display_gladevcp_panel",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:205:function:gladevcptestpanel",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:29:class:TESTS",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:30:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:406:function:load_ladder",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:44:function:parporttest",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:466:function:tune_axis",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:467:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:755:function:update_tune_test_params",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:878:function:tune_jogminus",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:881:function:tune_jogplus",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:885:function:toggle_tuneinvertmotor",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:886:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:901:function:test_axis",
|
|
"src:symbol:linuxcnc/lib/python/pncconf/tests.py:902:function:get_value",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:134:function:support_coord_buttons",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:167:function:set_theme",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:177:function:on_response",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:182:function:on_delete",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:184:function:on_close",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:186:function:run",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:202:function:on_click",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:207:function:label_to_method",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:218:function:do_unknown_label",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:221:function:do_number",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:226:function:do_backspace",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:229:function:do_sign",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:239:function:do_save",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:245:function:do_cancel",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:249:function:do_clear",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:252:function:do_axis_letter",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:259:function:get_result",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:262:function:coord_value",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:67:class:PopupKeyboard",
|
|
"src:symbol:linuxcnc/lib/python/popupkeyboard.py:68:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/propertywindow.py:21:function:properties",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:103:function:__port",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:106:function:read",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:116:function:peek",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:126:function:peek_commit",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:131:function:write",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:137:function:readable",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:143:function:writable",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:149:function:size",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:152:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:158:function:waitReadable",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:164:function:waitWritable",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:172:class:component",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:173:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:181:function:__del__",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:185:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:193:function:ready",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:198:function:name",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:202:function:pinNew",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:223:function:sigNew",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:232:function:sigLink",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:238:function:halMalloc",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:43:class:HalException",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:48:class:halType",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:63:class:pinDir",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:71:class:pin",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:72:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:80:function:fullname",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:84:function:value",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:91:function:value",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:98:class:port",
|
|
"src:symbol:linuxcnc/lib/python/pyhal.py:99:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1067:function:addto_spath",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1076:function:get_editor",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1079:function:get_ini_file",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1082:function:get_subroutine_path",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1085:function:get_user_m_path",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1088:function:find_file_in_path",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1117:function:get_subfiles",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1124:function:get_preamble",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1130:function:get_postamble",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1136:function:get_font",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1142:function:get_ngcgui_options",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1145:function:get_gcmc_include_path",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1149:function:get_program_prefix",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1162:class:PreFile",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1164:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1168:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1172:function:read",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1189:class:PstFile",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1191:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1195:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1199:function:read",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1216:class:SubFile",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1218:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1249:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1256:function:flagerror",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1260:function:specialcomments_ngc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1268:function:re_read",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1274:function:read_ngc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1378:function:read_gcmc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1438:class:FileSet",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1440:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1449:class:OneParmEntry",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1451:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1499:function:grabit",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1506:function:popkeyboard",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1519:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:153:function:exception_show",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1553:function:getentry",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1556:function:setentry",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1559:function:clear_pentry",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1567:function:make_pentry",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1600:class:EntryFields",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1602:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1634:function:make_entryfields",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1675:function:getentry_byidx",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1678:function:clear_pentry_byidx",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1681:function:make_pentry_byidx",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1684:function:getstuff_byidx",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1688:function:get_box",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1691:function:clear_parm_entries",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1695:function:set_parm_entries",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1708:class:TestButtons",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1710:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1742:function:btest",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:176:function:save_a_copy",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1813:function:delete",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1818:class:ControlPanel",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:1820:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:192:function:get_linuxcnc_ini_file",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2005:function:separate_image",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2017:function:wdestroy",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2020:function:set_message",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2023:function:reread_files",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2039:function:restart_features",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2051:function:toggle_autosend",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2055:function:toggle_expandsub",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2059:function:checkb_toggle",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2064:function:create_feature",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:208:function:dummy_send",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2113:function:savesection_ngc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:211:function:default_send",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2145:function:savesection_gcmc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2271:function:finalize_features",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:228:function:send_to_axis",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2415:function:write_to_file",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2433:function:file_choose",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:243:function:file_save",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2506:class:OnePg",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2508:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2646:function:periodic_check",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2679:function:any_event",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2717:function:handle_key",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2742:function:edit_any_file",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2751:function:edit_std_file",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2756:function:show_special_keys",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2771:function:set_page_label",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2774:function:save_onepage_tablabel",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2778:function:update_tab_label",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:278:function:is_comment",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2796:function:make_fileset",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2806:function:fill_entrypage",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2822:function:clear_entrypage",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2826:function:update_onepage",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:285:function:get_info_item",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2866:function:clear_entries",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2883:function:move_left",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2892:function:move_right",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2901:function:clone_page",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2911:function:new_empty_page",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2914:function:remove_page",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2933:class:NgcGui",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:2936:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:294:function:check_sub_start",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:302:function:check_sub_end",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:310:function:check_for_label",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3173:function:update_fonts",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3176:function:page_switched",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3194:function:add_page",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3235:function:make_unique_tab_name",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3254:class:SaveSection",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3256:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:325:function:check_positional_parm_range",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:335:function:find_positional_parms",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3375:function:usage",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:3408:function:standalone_pyngcgui",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:401:function:user_message",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:423:function:dt",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:426:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:430:function:find_image",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:442:function:sized_image",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:462:function:show_dir",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:501:function:dprint",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:505:function:vprint",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:509:function:spath_from_inifile",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:542:function:mpath_from_inifile",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:567:function:spath_from_files",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:599:function:long_name",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:609:function:show_parent",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:620:function:all_coords",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:626:function:show_position",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:648:function:coord_value",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:667:function:make_g_styles",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:711:function:mod_font_by_category",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:753:function:update_fonts",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:759:function:clean_tmpgcmc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:769:function:find_gcmc",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:793:class:CandidateDialog",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:795:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:851:function:get_file_result",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:882:function:row_activated",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:886:function:run",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:889:function:destroy",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:893:class:CandidateFiles",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:895:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:901:function:refresh",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:906:function:make_tree",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:957:function:get_tree_data",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:973:class:LinuxcncInterface",
|
|
"src:symbol:linuxcnc/lib/python/pyngcgui.py:975:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:116:function:mdi_active",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:119:function:mist_on",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:122:function:mist_off",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:125:function:flood_on",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:128:function:flood_off",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:131:function:estop",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:134:function:estop_reset",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:137:function:machine_off",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:140:function:machine_on",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:143:function:home_all",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:147:function:unhome_all",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:151:function:home_selected",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:155:function:unhome_selected",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:159:function:jogging",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:162:function:override_limits",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:166:function:spindle_forward_adjust",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:177:function:spindle_forward",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:183:function:spindle_stop",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:187:function:spindle_reverse",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:193:function:spindle_reverse_adjust",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:204:function:spindle_faster",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:208:function:spindle_slower",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:212:function:set_linear_jog_velocity",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:221:function:set_angular_jog_velocity",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:22:function:DBG",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:230:function:continuous_jog",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:248:function:incremental_jog",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:264:function:quill_up",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:269:function:feed_hold",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:272:function:feed_override",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:275:function:rapid_override",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:278:function:spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:27:function:load_handlers",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:281:function:max_velocity",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:284:function:reload_tooltable",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:287:function:optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:290:function:block_delete",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:293:function:abort",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:296:function:pause",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:299:function:resume",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:302:function:single_block",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:30:function:add_handler",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:317:function:smart_cycle_start",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:332:function:re_start",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:340:function:mdi_and_return",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:352:function:mdi",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:367:function:set_restart_line",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:371:function:set_manual_mode",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:377:function:set_mdi_mode",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:383:function:set_auto_mode",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:389:function:get_mode",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:393:function:ok_for_mdi",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:399:function:is_spindle_running",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:407:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:415:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:417:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:420:function:get_jjogmode",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:429:function:jnum_for_axisnum",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:445:function:get_jog_info",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:87:class:Trampoline",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:88:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:91:function:__call__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:96:class:CNC_COMMANDS",
|
|
"src:symbol:linuxcnc/lib/python/pyui/commands.py:97:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:145:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:167:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:173:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:177:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:179:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:183:function:main",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:26:function:DBG",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:30:class:keyboard",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:34:function:validate",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:38:function:build",
|
|
"src:symbol:linuxcnc/lib/python/pyui/master.py:42:function:build_widget",
|
|
"src:symbol:linuxcnc/lib/python/pyui/panelui_validate.py:19:function:list_check",
|
|
"src:symbol:linuxcnc/lib/python/pyui/panelui_validate.py:30:function:numerical_check",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:123:function:find_method",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:12:class:_WidgetBase",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:136:function:toggle_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:13:function:hal_init",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:142:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:206:function:stringToPython",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:207:function:convert",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:230:class:GROUP",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:231:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:247:function:add_list",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:252:function:toggle_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:264:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:274:class:TOGGLE_BUTTONS",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:279:class:MOMENTARY_BUTTONS",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:280:function:toggle_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:291:class:RADIO_BUTTONS",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:292:function:toggle_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:7:function:DBG",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:80:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:84:function:toggle_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:88:function:set_state",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:91:function:hal_update",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:95:class:_ToggleBase",
|
|
"src:symbol:linuxcnc/lib/python/pyui/widgets.py:96:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1015:function:return_pressed",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1023:function:command",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1026:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1039:function:wheel_up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1045:function:wheel_down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1054:class:pyvcp_number",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1057:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1070:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1078:class:pyvcp_u32",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1081:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1094:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1102:class:pyvcp_s32",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1105:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1118:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1125:class:pyvcp_timer",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1133:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1157:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:116:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1186:class:pyvcp_bar",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1210:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1269:function:set_fill",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1284:function:bar_coords",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1303:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1327:class:pyvcp_led",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1336:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1357:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1375:class:pyvcp_rectled",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1386:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1407:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1428:class:pyvcp_checkbutton",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1439:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1460:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1482:class:pyvcp_button",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1491:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1508:function:pressed",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1514:function:released",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1520:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1533:class:pyvcp_scale",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1553:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1593:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1604:function:wheel_up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1607:function:wheel_down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1611:class:pyvcp_table",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1637:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1653:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1677:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1679:class:pyvcp_tablerow",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1680:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1681:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1683:class:pyvcp_tablespan",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1684:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1686:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1688:class:pyvcp_tablesticky",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1689:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1691:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1693:class:pyvcp_include",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1694:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1728:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1730:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1733:class:_pyvcp_dummy",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1734:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1735:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1736:function:pack",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1738:class:pyvcp_title",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1739:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1743:class:pyvcp_axisoptions",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1744:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1748:class:pyvcp_option",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1749:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1752:class:pyvcp_image",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1754:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1757:class:_pyvcp_image",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1758:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1770:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1779:class:pyvcp_image_bit",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:1781:class:pyvcp_image_u32",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:216:function:chgScaleDn",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:224:function:chgScaleUp",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:233:function:resetScale",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:240:function:resetValue",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:247:function:dot_coords",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:255:function:bdown",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:261:function:bup",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:264:function:motion",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:275:function:wheel_up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:278:function:wheel_down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:281:function:down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:293:function:up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:305:function:update_dot",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:311:function:update_dro",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:316:function:update_scale",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:321:function:draw_ticks",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:336:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:351:class:pyvcp_meter",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:369:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:409:function:rad2deg",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:411:function:value2angle",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:421:function:p2c",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:426:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:432:function:draw_region",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:444:function:draw_ticks",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:467:class:pyvcp_jogwheel",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:490:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:573:function:update_jogscale",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:581:function:update_dro",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:586:function:reset_dro",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:594:function:resetValue",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:599:function:dot_coords",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:606:function:bdown",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:60:class:pyvcp_dial",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:611:function:motion",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:621:function:wheel_up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:624:function:wheel_down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:627:function:down",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:635:function:up",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:643:function:update_dot",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:649:function:draw_ticks",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:657:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:676:class:pyvcp_radiobutton",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:678:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:706:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:720:function:changed",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:729:class:pyvcp_label",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:738:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:749:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:762:class:pyvcp_multilabel",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:775:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:811:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:841:class:pyvcp_vbox",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:849:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:856:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:859:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:871:class:pyvcp_boxfill",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:872:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:874:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:876:class:pyvcp_boxanchor",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:877:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:879:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:881:class:pyvcp_boxexpand",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:882:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:884:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:888:class:pyvcp_hbox",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:896:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:903:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:906:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:918:class:pyvcp_labelframe",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:922:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:925:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:927:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:930:class:pyvcp_tabs",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:931:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:937:function:update",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:939:function:add",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:944:function:getcontainer",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:953:class:pyvcp_spinbox",
|
|
"src:symbol:linuxcnc/lib/python/pyvcp_widgets.py:967:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1000:function:set_prime",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1006:function:select_prime",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1012:function:select_fire",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1019:function:select_cancel",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1022:function:wheelEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1031:function:mousePressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1041:function:mouseReleaseEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1049:function:mouseDoubleClickEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:104:class:DummyProgress",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1053:function:mouseMoveEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:105:function:nextphase",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1067:function:user_plot",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:106:function:progress",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1070:function:panView",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1073:function:rotateView",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1076:function:recordCurrentViewSettings",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1087:function:getRecordedViewSettings",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:108:class:Progress",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1091:function:setRecordedView",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:109:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1100:function:getCurrentViewSettings",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1109:function:presetViewSettings",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1119:function:setView",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1128:function:makeObject",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:116:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1186:function:quad",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1199:function:lathe_quad",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1213:function:extrude",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1224:function:setfont",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1227:function:getfont",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1229:function:resetfont",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1233:function:setfontlarge",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1236:function:getfontlarge",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:1238:function:resetfontlarge",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:123:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:126:function:nextphase",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:132:function:done",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:136:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:142:class:StatCanon",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:143:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:153:function:is_lathe",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:155:function:change_tool",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:160:function:do_cancel",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:164:function:check_abort",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:168:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:177:function:output_notify_message",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:183:class:Lcnc_3dGraphics",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:190:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:194:function:C",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:316:function:addTimer",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:321:function:poll",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:338:function:showEvent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:344:function:load",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:412:function:output_notify_message",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:416:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:419:function:from_internal_linear_unit",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:425:function:calculate_gcode_properties",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:426:function:dist",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:430:function:from_internal_units",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:46:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:510:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:525:function:realize",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:543:function:get_font_info",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:545:function:get_program_alpha",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:546:function:get_num_joints",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:547:function:get_joints_mode",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:548:function:get_show_commanded",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:549:function:get_show_extents",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:550:function:get_gcode_properties",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:551:function:get_show_limits",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:552:function:get_show_live_plot",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:553:function:get_show_machine_speed",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:554:function:get_show_metric",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:555:function:get_show_program",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:556:function:get_show_rapids",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:557:function:get_show_relative",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:558:function:get_show_tool",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:559:function:get_show_distance_to_go",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:560:function:get_grid_size",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:561:function:get_show_offsets",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:562:function:get_view",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:565:function:get_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:573:function:is_lathe",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:574:function:is_foam",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:575:function:get_current_tool",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:579:function:get_highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:580:function:get_a_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:581:function:get_b_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:582:function:get_c_axis_wrapped",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:583:function:set_current_view",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:587:function:clear_live_plotter",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:591:function:winfo_width",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:594:function:winfo_height",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:598:function:activate",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:600:function:deactivate",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:602:function:swapbuffers",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:606:function:_redraw",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:613:function:joint_dro_format_OFF",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:632:function:dro_format",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:732:function:minimumSizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:735:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:738:function:normalizeAngle",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:745:function:setXRotation",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:752:function:setYRotation",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:759:function:setZRotation",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:766:function:setZoom",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:771:function:initializeGL",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:778:function:paintGL",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:79:function:createSlider",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:803:function:redraw_perspective",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:861:function:redraw_ortho",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:90:function:createZoomSlider",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:917:function:basic_lighting",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:931:function:resizeGL",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:944:function:set_alpha_mode",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:948:function:set_inhibit_selection",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:951:function:get_plot_colors",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:954:function:get_default_plot_colors",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:955:function:C",
|
|
"src:symbol:linuxcnc/lib/python/qt5_graphics.py:968:function:set_plot_colors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:102:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:110:function:error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:113:function:getError",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:116:function:get",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:119:function:set",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:122:function:get_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:125:class:_QHal",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:137:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:142:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:152:function:newpin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:182:function:getpin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:184:function:getvalue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:190:function:setp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:196:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:200:function:makeUniqueName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:214:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:215:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:217:class:Qhal",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:220:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:230:class:Status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:239:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:244:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:261:function:set_timer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:26:class:Info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:271:function:poll_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:275:function:block_error_polling",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:279:function:unblock_error_polling",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:289:class:Path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:293:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:303:class:Action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:307:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:30:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:319:class:Tool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:323:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:39:class:QPin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:45:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:53:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:59:function:text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:65:function:error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:69:function:update_all",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:85:function:update_start",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:94:function:update_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/core.py:99:class:DummyPin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:128:function:_register_messages",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:137:function:os_jump",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:160:function:jump",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:180:function:on_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:193:function:play_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:197:function:play_ready",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:201:function:play_attention",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:205:function:play_ring",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:209:function:play_done",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:213:function:play_login",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:217:function:play_logout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:221:function:play_bell",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:228:function:beep_ring",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:235:function:beep_start",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:240:function:beep",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:246:function:os_speak",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:263:function:speak_cancel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:270:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:273:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:71:function:speak_synth_callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:80:class:Player",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:81:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/audio_player.py:96:function:set_sounds",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:103:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:105:function:homed_on_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:112:function:start_process",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:121:function:process_started",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:125:function:read_stdout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:130:function:read_stderror",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:135:function:process_finished",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:140:function:parse_input",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:162:function:chk_enable_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:166:function:btn_read_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:173:function:set_position_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:193:function:start",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:210:function:show_result",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:217:function:add_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:222:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:224:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:37:class:Auto_Measure",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/auto_height/auto_height.py:38:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:102:function:new_thread",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:114:function:load_haltool_args",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:19:class:Aux_program_loader",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:20:function:_init_",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:24:function:load_ladder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:30:function:load_gcode_ripper",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:37:function:load_halshow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:44:function:load_calibration",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:48:function:load_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:52:function:load_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:59:function:load_halscope",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:66:function:load_tooledit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:69:function:load_test_button",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:75:function:load_test_led",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:81:function:load_test_dial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/aux_program_loader.py:87:function:keyboard_onboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/colored_formatter.py:54:function:COLORIZE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/colored_formatter.py:69:class:ColoredFormatter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/colored_formatter.py:71:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/colored_formatter.py:76:function:format",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/colored_formatter.py:95:function:color_words",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:104:function:set_validator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:121:function:raster_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:130:function:validate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:196:function:create_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:210:function:send_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:224:function:calculate_toolpath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:22:class:Facing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:23:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:258:function:btn_help_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:261:function:raster_0",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:274:function:raster_45",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:353:function:raster_90",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:366:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:370:function:_mktemp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:42:function:init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/facing.py:88:function:units_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:157:function:units_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:167:function:set_validator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:187:function:clear_all",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:197:function:validate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:25:class:Preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:26:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:277:function:create_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:291:function:send_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:305:function:calculate_toolpath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:31:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:336:function:output_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:338:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:369:function:_mktemp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:376:function:btn_help_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:379:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:40:function:draw_main_circle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:49:function:draw_crosshair",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:70:function:draw_holes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:88:function:set_num_holes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:91:function:set_first_angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:94:class:Hole_Circle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_circle.py:95:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:111:function:send_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:119:function:preview_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:127:function:validate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:233:function:create_gcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:243:function:estimate_runtime",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:256:function:load_tool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:290:function:calculate_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:32:class:Hole_Enlarge",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:33:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:340:function:units_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:352:function:direction_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:356:function:mist_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:360:function:flood_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:364:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:368:function:make_temp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:374:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:377:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcode_utility/hole_enlarge.py:97:function:create_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcodes.py:10:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcodes.py:13:function:setup_list",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcodes.py:20:function:list_row_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/gcodes.py:9:class:GCodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:198:class:_Keycalls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:199:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:215:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:218:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:223:class:Keylookup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:224:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:229:function:call",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:242:function:convert",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:251:function:get_call",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:259:function:add_call",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:266:function:del_call",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:274:function:manage_function_calls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/keybindings.py:29:function:key_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:17:class:MachineLogger",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:18:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:22:function:log_it",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:39:function:initial_greeting",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:67:function:log_message_time",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:77:function:log_message_date",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:87:function:log_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/machine_log.py:96:function:delete_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/mdi_text.py:122:function:gcode_words",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/mdi_text.py:185:function:gcode_descriptions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/mdi_text.py:1:function:gcode_titles",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:126:function:showDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:145:function:msgbtn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:152:function:message_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:161:function:dialog_return",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:181:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:184:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:192:function:callreturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:19:class:Message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:20:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:36:function:message_setup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:77:function:dummy",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:78:function:calluser",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/message.py:89:function:on_printmessage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:108:function:build_error_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:119:function:build_hard_limits_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:130:function:build_general_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:141:function:show_yn_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:152:function:show_ok_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:162:function:show_toolchange_notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:177:function:yesClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:181:function:noClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:185:function:okClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:189:function:cancelClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:193:function:jogPauseClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:197:function:handle_closed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:200:function:closeClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:205:function:OnClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:210:function:action_callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:216:function:last5_callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:228:function:destroyClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:23:class:Notify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:240:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:268:function:show_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:278:function:show_last",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:294:function:external_close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:305:function:add_alarm_entry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:313:function:cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:44:function:notify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:60:function:new_critical",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:71:function:new_hard_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:82:function:new_normal",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:91:function:notify_yn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/notify.py:98:function:notify_ok",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:22:class:Access",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:44:function:getpref",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:66:function:getall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:76:function:putpref",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/preferences.py:86:function:removepref",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:132:function:fill_parm_fields",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:140:function:empty_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:145:function:new_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:152:function:new_lineedit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:167:function:parm_edited",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:179:class:SubFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:180:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:216:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:223:function:re_read",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:229:function:read_gcmc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:232:function:read_ngc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:308:function:flag_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:312:function:specialcomments_ngc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:319:class:FileSet",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:320:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:326:class:PreFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:327:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:332:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:336:function:read",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:351:class:PstFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:352:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:357:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:361:function:read",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:375:class:SaveSection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:376:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:42:class:OnePg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:43:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:450:class:NgcGui",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:451:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:489:function:add_configd_tabs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:525:function:add_page",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:531:function:file_choose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:55:function:update_onepage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:599:function:reread_files",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:613:function:close_tab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:621:function:tab_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:640:function:create_feature",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:662:function:finalize_features",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:772:function:restart_features",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:77:function:make_fileset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:784:function:savesection_ngc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:794:function:write_to_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:807:function:warp_info_frame",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:813:function:warp_tabs_frame",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:818:function:check_linuxcnc_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:826:function:check_linuxcnc_paths_pass",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:831:function:check_linuxcnc_paths_fail",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:838:function:check_positional_parm_range",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:83:function:create_parms",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:848:function:check_for_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:862:function:check_sub_end",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:870:function:check_sub_start",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:878:function:default_send",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:895:function:dt",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:898:function:find_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:910:function:find_positional_parms",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:956:function:get_file_open",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:965:function:get_file_save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:974:function:get_info_item",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:982:function:is_comment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:989:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_ngcgui/ngcgui.py:993:function:save_a_copy",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:106:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:17:class:PDFView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:18:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:32:function:loadSample",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:39:function:loadView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:52:function:refreshPages",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:68:function:zoomFactor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:71:function:setZoomFactor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_pdf/PDFViewer.py:77:function:pdf_view",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py:180:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/fanuc_200f.py:182:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py:125:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py:127:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py:33:class:HalToolCylinder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py:34:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/gantry_5axis.py:38:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/mill_xyz.py:229:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/mill_xyz.py:231:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/millturn.py:251:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/millturn.py:253:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/millturn.py:46:class:HalToolCylinder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/millturn.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/millturn.py:53:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:100:function:traverse",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1015:class:AsciiOBJ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1016:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1040:function:parse_int",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1044:function:parse_slash",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1047:function:parse_face",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1050:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1075:class:HalTranslate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1076:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1082:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1095:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1099:class:HalRotate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1100:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1106:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1119:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1123:class:HalToolCylinder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1128:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1134:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:113:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1153:function:set_tool_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1158:class:HalToolTriangle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1159:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:1166:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:124:function:set_volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:128:class:Translate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:129:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:133:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:137:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:141:class:Scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:142:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:146:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:150:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:153:class:Rotate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:154:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:158:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:163:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:167:class:Track",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:173:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:179:function:angle_to",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:187:function:map_coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:194:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:222:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:226:class:CoordsBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:227:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:236:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:239:function:_coord",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:250:class:CylinderX",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:251:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:280:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:290:class:CylinderY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:291:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:295:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:324:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:332:class:CylinderZ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:333:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:358:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:367:class:Sphere",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:368:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:377:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:386:class:TriangleXY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:387:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:447:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:463:class:TriangleXZ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:464:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:468:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:476:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:483:class:TriangleYZ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:484:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:488:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:496:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:502:class:ArcX",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:503:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:588:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:609:class:Box",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:610:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:664:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:673:class:BoxCentered",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:674:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:681:class:BoxCenteredXY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:682:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:689:class:Capture",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:690:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:693:function:capture",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:696:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:709:function:invert",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:725:class:Hud",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:730:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:740:function:show",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:745:function:hide",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:748:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:751:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:820:class:HalHud",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:824:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:839:function:add_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:844:function:show_top",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:848:function:show",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:852:function:hide",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:855:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:859:function:set_background_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:85:function:pango_font_pre",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:863:function:set_text_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:866:function:set_char_width",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:869:function:set_char_height",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:872:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:875:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:90:function:pango_font_post",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:952:class:Color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:953:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:957:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:95:class:Collection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:961:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:965:class:AsciiSTL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:966:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:96:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:997:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/primitives.py:9:function:use_pango_font",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:122:function:getOpenglInfo",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:137:function:minimumSizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:140:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:143:function:winfo_width",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:146:function:winfo_height",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:149:function:setXRotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:156:function:setYRotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:15:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:163:function:setZRotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:170:function:setZoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:174:function:zoomin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:180:function:zoomout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:186:function:set_latitudelimits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:198:function:initializeGL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:216:function:paintGL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:259:function:drawObjects",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:346:function:plotclear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:349:function:resizeGL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:362:function:mousePressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:365:function:mouseMoveEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:388:function:mouseDoubleClickEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:392:function:wheelEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:401:function:normalizeAngle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:409:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:54:function:createSlider",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:65:function:setZoomRange",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:68:class:GLWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/qt_vismach.py:74:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/scara.py:193:class:Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qt_vismach/scara.py:195:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:128:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:32:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:55:function:mirror_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:63:function:flip_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:71:function:undo_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_block.py:78:function:get_parameters",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_bolt.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_bolt.py:57:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_bolt.py:66:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_bolt.py:69:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:100:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:57:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:70:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:73:function:overcut_toggled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_circle.py:87:function:cut_type_toggled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py:55:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py:58:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_ellipse.py:70:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_gusset.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_gusset.py:55:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_gusset.py:68:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_gusset.py:71:function:rad_button_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_gusset.py:78:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:104:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:119:function:line_type_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:137:function:add_shape_to_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:149:function:undo_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:168:function:clear_widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:175:function:set_start_point",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:183:function:set_line_point_to_point",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:192:function:set_line_by_angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:202:function:set_arc_3_points",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:213:function:set_arc_2_points_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:227:function:set_arc_by_angle_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:241:function:set_arc_widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:251:function:error_set",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:254:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_line.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_polygon.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_polygon.py:56:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_polygon.py:69:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_polygon.py:72:function:mode_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_polygon.py:79:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py:64:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py:78:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py:81:function:rad_button_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_rectangle.py:93:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_sector.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_sector.py:54:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_sector.py:67:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_sector.py:70:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:114:function:centLeft_toggled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:121:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:27:function:save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:71:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:77:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:88:function:load",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_settings.py:98:function:show",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_slot.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_slot.py:55:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_slot.py:68:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_slot.py:71:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_star.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_star.py:55:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_star.py:68:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_star.py:71:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_triangle.py:29:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_triangle.py:56:function:auto_preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_triangle.py:74:function:entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conv_triangle.py:77:function:widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:126:function:conv_save_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:150:function:conv_settings_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:164:function:conv_send_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:172:function:conv_block_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:193:function:conv_shape_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:254:function:conv_preview_button",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:275:function:conv_active_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:287:function:conv_button_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:304:function:conv_restore_buttons",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:308:function:conv_enable_tabs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:323:function:conv_entry_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:407:function:conv_is_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:414:function:conv_is_int",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:421:function:conv_undo_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:461:function:conv_add_shape_to_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:484:function:conv_accept",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:48:function:conv_setup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:494:function:conv_clear_widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:528:function:conv_auto_preview_button",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:540:function:conv_widgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/conversational.py:93:function:conv_new_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:142:function:dlg_scribe_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:176:function:dlg_probe_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:217:function:dlg_set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:244:function:get_reply",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:265:function:camera_search",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:291:function:camera_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:31:function:dialog_show",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:324:function:camera_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:333:function:camera_btn_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:337:function:do_tool_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:62:function:dlg_cancel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:74:function:dlg_laser_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/set_offsets.py:97:function:dlg_camera_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/tooltips.py:171:function:set_tool_tips",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/tooltips.py:30:function:tool_tips_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/tooltips.py:36:function:clear_tool_tips",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:154:function:move_options_to_prefs_file_iniwrite",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:179:function:get_offsets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:198:function:remove_qtplasmac_link_iniwrite",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:224:function:rs274ngc_startup_code_iniwrite",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:245:function:move_prefs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:279:function:split_prefs_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:28:function:move_default_material",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:321:function:add_component_hal_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:360:function:add_component_hal_file_iniwrite",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:69:function:move_port",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/qtplasmac/updater.py:81:function:move_options_to_prefs_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1102:function:Open_Config_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:110:function:next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1252:function:File_Read_Probe_data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1372:function:WriteGCode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:141:function:fmessage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1477:function:WriteExportCode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1491:function:menu_CopyClipboard_GCode_Base",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1493:function:menu_CopyClipboard_GCode_Left",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1495:function:menu_CopyClipboard_GCode_Right",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1498:function:CopyClipboard_GCode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1506:function:Quit_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1510:function:ZOOM_ITEMS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1518:function:ZOOM",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1528:function:menu_View_Zoom_in",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1533:function:menu_View_Zoom_out",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1538:function:_mouseZoomIn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1541:function:_mouseZoomOut",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1544:function:mouseZoomStart",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1549:function:mouseZoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1558:function:mousePanStart",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1562:function:mousePan",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1573:function:Recalculate_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1576:function:Settings_ReLoad_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1587:function:Close_Current_Window_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1593:function:Stop_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1599:function:Entry_GscaleXY_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:159:function:debug_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1608:function:Entry_GscaleXY_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1611:function:Entry_GscaleZ_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1620:function:Entry_GscaleZ_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1623:function:Entry_GscaleF_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1632:function:Entry_GscaleF_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1635:function:Entry_Rotate_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1644:function:Entry_Rotate_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1647:function:Entry_SplitA_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1656:function:Entry_SplitA_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1659:function:Entry_SplitX_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1668:function:Entry_SplitX_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1672:function:Entry_SplitY_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1681:function:Entry_SplitY_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1688:function:Entry_Feed_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1694:function:Entry_Feed_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1697:function:Entry_Zsafe_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:169:function:message_box",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1703:function:Entry_Zsafe_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1708:function:Entry_Wrap_DIA_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1717:function:Entry_Wrap_DIA_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1721:function:Entry_probe_nX_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1730:function:Entry_probe_nX_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1734:function:Entry_probe_nY_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1743:function:Entry_probe_nY_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1747:function:Entry_ProbeDepth_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1756:function:Entry_ProbeDepth_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1760:function:Entry_ProbeOffsetX_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1766:function:Entry_ProbeOffsetX_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1769:function:Entry_ProbeOffsetY_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:176:function:message_ask_ok_cancel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1775:function:Entry_ProbeOffsetY_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1778:function:Entry_ProbeOffsetZ_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1784:function:Entry_ProbeOffsetZ_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1790:function:Entry_ProbeSafe_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1796:function:Entry_ProbeSafe_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1799:function:Entry_ProbeFeed_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1805:function:Entry_ProbeFeed_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1808:function:Entry_ProbeIStep_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1814:function:Entry_ProbeIStep_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1827:function:Entry_ArcAngle_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1833:function:Entry_ArcAngle_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1836:function:Entry_Accuracy_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1845:function:Entry_Accuracy_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1848:function:Entry_DPlaces_L_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:184:function:error_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1857:function:Entry_DPlaces_L_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1860:function:Entry_DPlaces_R_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1869:function:Entry_DPlaces_R_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1872:function:Entry_DPlaces_F_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1881:function:Entry_DPlaces_F_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1890:function:Entry_SR_Tool_DIA_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1899:function:Entry_SR_Tool_DIA_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1906:function:Entry_SR_Step_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1915:function:Entry_SR_Step_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1920:function:Entry_SR_Remove_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1929:function:Entry_SR_Remove_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:192:function:Stop_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1934:function:Entry_SR_MIN_X_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1940:function:Entry_SR_MIN_X_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1945:function:Entry_SR_MAX_X_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1951:function:Entry_SR_MAX_X_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1956:function:Entry_SR_ZSafe_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1965:function:Entry_SR_ZSafe_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:196:function:Ignore_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1971:function:Entry_SR_Feed_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1980:function:Entry_SR_Feed_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1985:function:Entry_SR_PlungeFeed_Check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:1994:function:Entry_SR_PlungeFeed_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2002:function:Check_All_Variables",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2058:function:Entry_recalc_var_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2062:function:Entry_units_var_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2071:function:menu_File_Open_G_Code_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2082:function:Open_G_Code_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2114:function:menu_File_Save_G_Code_Base",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2117:function:menu_File_Save_G_Code_Left",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2120:function:menu_File_Save_G_Code_Right",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2123:function:menu_File_Save_G_Code_Wrap",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2128:function:menu_File_Save_Export_Write",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2133:function:menu_File_Save_G_Code_round",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2139:function:menu_File_Save_G_Code_Probe_n_Cut",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2142:function:menu_File_Save_G_Code_Adjusted",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2145:function:menu_File_Save_G_Code_ProbeOnly",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2148:function:menu_File_Read_Probe_data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2162:function:menu_Clear_Probe_data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2169:function:File_Save_G_Code_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2227:function:File_Save_Export_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:226:function:cmp_new",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2271:function:menu_File_Quit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2275:function:menu_View_Refresh_Callback",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2278:function:menu_View_Refresh",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2283:function:menu_Mode_Change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2290:function:menu_View_Recalculate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2293:function:menu_Help_About",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2301:function:menu_Help_About",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2315:function:menu_Help_Web",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2318:function:KEY_F1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2321:function:KEY_F2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2324:function:KEY_F5",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2328:function:KEY_ZOOM_IN",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2331:function:KEY_ZOOM_OUT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2334:function:KEY_CTRL_G",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2338:function:bindConfigure",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2343:function:Master_Configure",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:237:function:Transform",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:245:function:Get_Angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:252:class:Line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:253:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:259:function:__repr__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:263:class:Application",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:264:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:276:function:createWidgets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2806:function:ISO_COORDS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2839:function:Plot_Line_ISO",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2871:function:Plot_Arc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2951:function:Plot_Circ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2966:function:Recalculate_RQD_Nocalc",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2970:function:Recalculate_RQD_Click",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2975:function:Recalc_RQD",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:2982:function:Plot_Data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3210:function:DoIt",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3478:function:GEN_Settings_Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3635:function:STOCK_Round_Window",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3795:class:G_Code_Rip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3796:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:3808:function:Read_G_Code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4280:function:get_center",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4323:function:split_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4461:function:probe_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4696:function:get_ix_iy",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4702:function:scale_rotate_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4825:function:scale_translate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4885:function:scale_trans_coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4891:function:scale_rot_coords",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:4899:function:generate_probing_gcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5034:function:generategcode_probe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5190:function:generategcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5400:function:generate_dxf_write_gcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5551:function:generate_csv_write_gcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5578:function:generate_round_gcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5730:function:app_gcode_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5756:function:get_arc_intersects",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5822:function:arc2lines",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5908:function:get_line_intersect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5933:function:apleft",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5937:function:apright",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5941:function:apboth",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5946:function:rm_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5954:function:insert_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5960:function:coordop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5971:function:coordunop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:5986:function:FUNCTION_EVAL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:6039:function:EXPRESSION_EVAL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:6357:function:list_split",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:6372:function:Transform",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:6380:function:Get_Angle2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:6393:function:main_is_frozen",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:950:function:entry_set",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/ripper/gcode_ripper.py:994:function:Write_Config_File",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:104:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:123:function:show",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:146:function:close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:154:function:onClose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:158:function:setUrgency",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:164:function:setSoundFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:168:function:setSoundName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:172:function:setIconPath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:176:function:setQIcon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:180:function:setLocation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:185:function:setCategory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:189:function:setTimeout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:195:function:setHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:199:function:addAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:210:function:_makeActionsList",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:218:function:_onActionInvoked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:236:function:onHelp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:242:function:onIgnore",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:249:function:onClose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:38:class:Urgency",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:43:class:UninitializedError",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:48:function:init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:74:function:_onActionInvoked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:85:function:_onNotificationClosed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/sys_notify.py:97:class:Notification",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:338:function:configure_submenu",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:373:function:configure_statusbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:391:function:actOnEstop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:401:function:statusOfEstop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:407:function:actOnPower",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:40:class:ToolBarActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:410:function:actOnLoad",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:413:function:actOnReload",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:416:function:actOnProperties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:41:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:447:function:actOnRun",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:450:function:actOnStep",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:453:function:actOnPause",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:456:function:actOnAbort",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:459:function:actOnBlockDelete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:465:function:actOnOptionalStop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:471:function:actOnLoadCalibration",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:474:function:actOnLoadHalmeter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:477:function:actOnLoadStatus",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:480:function:actOnLoadHalshow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:483:function:actOnLoadHalscope",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:486:function:actOnLoadExtTooledit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:489:function:actOnLoadClassicladder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:492:function:actOnZoomIn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:495:function:actOnZoomOut",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:498:function:actOnViewX",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:501:function:actOnViewY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:504:function:actOnViewY2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:507:function:actOnViewZ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:510:function:actOnViewZ2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:513:function:actOnViewp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:516:function:actOnViewClear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:519:function:actOnViewOffsets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:525:function:actOnLargeDRO",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:531:function:actOnQuit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:534:function:actOnSystemShutdown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:546:function:actOnAbout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:54:function:configure_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:573:function:actOnRunFromLine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:577:function:actOnToolOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:580:function:actOnOriginOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:583:function:actOnCalculatorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:586:function:actOnAlphaMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:58:function:homed_on_loaded_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:592:function:actOnInhibitSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:598:function:actOnShowDimensions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:604:function:actOnMessageClose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:607:function:actOnMessageRecall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:610:function:actOnHomeAll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:613:function:actOnUnHomeAll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:618:function:actOnHomeSelected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:632:function:actOnUnHomeSelected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:63:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:644:function:actOnManualMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:647:function:actOnMDIMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:650:function:actOnAutoMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:653:function:actOnJointMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:656:function:actOnAxisMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:662:function:addHomeActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:663:function:home",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:676:function:addUnHomeActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:677:function:unHome",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:67:function:update_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:690:function:addZeroSystemsActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:70:function:update_selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:727:function:updateRecentPaths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:728:function:loadRecent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:758:function:addRecentPaths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:765:function:saveRecentPaths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:770:function:addGridSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:771:function:setSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:788:function:parse_increment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:812:function:conversion",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:828:function:addMessageControlsClose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:829:function:close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:842:function:addMessageControlsRecall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/toolbar_actions.py:843:function:last",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:107:function:process_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:135:function:CALL_MDI_WAIT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:162:function:prechecks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:176:function:postreset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:179:function:touchoff",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:196:function:probe_z",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:238:function:probe_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:262:function:update_data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:269:function:collect_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:277:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:279:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:36:class:TouchOffSubprog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:74:function:set_timeout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/touchoff_subprogram.py:77:function:process",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:15:class:virt_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:16:function:_init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:19:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:22:function:command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:28:function:init_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/virtual_keyboard.py:52:function:kill_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/datetime.py:10:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/datetime.py:28:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/datetime.py:51:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/datetime.py:9:class:DateTime",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:120:function:replace",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:135:function:replaceAll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:13:class:Find",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:146:function:moveCursor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:14:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:24:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/find.py:71:function:find",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/table.py:11:class:Table",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/table.py:12:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/table.py:19:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/table.py:68:function:insert",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/wordcount.py:15:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/wordcount.py:66:function:getText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/wordcount.py:7:class:WordCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/ext/wordcount.py:8:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:166:function:initFormatbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:21:class:Main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:23:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:284:function:initMenubar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:321:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:32:function:initToolbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:352:function:changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:355:function:closeEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:388:function:context",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:483:function:removeRow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:498:function:removeCol",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:513:function:insertRow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:528:function:insertCol",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:543:function:toggleToolbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:550:function:toggleFormatbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:557:function:toggleStatusbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:564:function:new",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:570:function:open",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:585:function:save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:606:function:preview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:616:function:printHandler",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:624:function:cursorPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:634:function:wordCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:642:function:insertImage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:674:function:fontColorChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:682:function:highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:688:function:bold",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:698:function:italic",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:704:function:underline",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:710:function:strike",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:721:function:superScript",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:741:function:subScript",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:761:function:alignLeft",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:764:function:alignRight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:767:function:alignCenter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:770:function:alignJustify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:773:function:indent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:807:function:handleDedent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:829:function:dedent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:856:function:bulletList",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:863:function:numberList",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/writer/writer.py:871:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:104:function:forward",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:115:class:X11ClientMessage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:116:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:121:function:send_client_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:21:function:reparent_qt_to_x11",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:57:class:XEmbedForwarding",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:61:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:77:function:catch_keypress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:81:function:catch_keyrelease",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/lib/xembed.py:84:function:build_event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/logger.py:113:function:getLogFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/logger.py:35:function:verbose",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/logger.py:57:function:getLogger",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/logger.py:65:function:setGlobalLevel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/logger.py:71:function:initBaseLogger",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1031:function:on_trueColorClick",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1037:function:on_falseColorClick",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1043:function:updateWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:109:function:showPopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:113:function:hidePopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1166:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1169:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1173:class:ActionButtonMenuEntry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1175:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1182:function:preferredEditAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1185:function:taskActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1188:function:updateOptions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1193:class:ActionButtonTaskMenuFactory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1194:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1197:function:createExtension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1209:class:RoundButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1210:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1214:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:121:function:selectIndex",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1223:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1226:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1229:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1232:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1235:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1238:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1241:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1244:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1247:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:1250:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:125:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:134:function:addItems",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:143:function:select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:151:function:updateLastPick",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:154:function:getLastPick",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:158:class:ActionButtonDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:159:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:210:function:buildtab1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:25:class:ActionButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:29:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:36:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:46:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:50:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:525:function:selectionChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:544:function:buildtab2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:56:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:60:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:64:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:68:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:73:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:77:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:82:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:845:function:statusSelectionChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:856:function:buildtab3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:87:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:91:class:TreeComboBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:92:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:941:function:launchDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/actionbutton_plugin.py:948:function:onSetOptions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:14:class:HalBarPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/bar_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:14:class:BasicProbePlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/basic_probe_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:11:class:CamViewPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/camview_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:15:class:StateEnableGridLayoutPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:16:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:20:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:25:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:28:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:31:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:34:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:37:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:40:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:43:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:46:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:49:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:52:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:59:class:JointEnableWidgetPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:60:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:64:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:69:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:72:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:75:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:78:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:81:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:84:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:87:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:90:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:93:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/container_plugin.py:96:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:14:class:DetachTabWidgetPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/detach_tabs_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:101:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:104:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:111:class:FileDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:113:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:118:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:11:class:DialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:124:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:127:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:130:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:133:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:136:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:139:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:142:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:145:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:151:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:154:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:161:class:CamViewDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:163:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:168:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:174:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:177:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:180:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:183:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:186:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:189:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:192:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:195:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:201:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:204:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:211:class:MacroTabDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:213:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:218:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:224:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:227:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:230:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:233:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:236:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:239:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:242:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:245:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:251:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:254:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:261:class:OriginOffsetDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:263:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:268:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:274:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:277:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:280:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:283:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:286:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:289:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:292:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:295:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:301:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:304:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:311:class:ToolOffsetDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:313:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:318:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:324:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:327:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:330:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:333:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:336:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:339:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:342:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:345:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:351:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:354:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:361:class:VersaProbeDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:363:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:368:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:374:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:377:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:380:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:383:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:386:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:389:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:392:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:395:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:401:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:404:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:411:class:EntryDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:413:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:417:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:422:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:425:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:428:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:431:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:434:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:437:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:440:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:443:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:449:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:452:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:61:class:ToolDialogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:63:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:68:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:74:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:77:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:80:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:83:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:86:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:89:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:92:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/dialog_plugin.py:95:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:14:class:GCodeGraphicsPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/graphics_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:14:class:HALLabelPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/hal_label_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:11:class:JogIncrementsPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/jogincrements_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:13:class:JoyPadPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:14:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:23:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:26:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:29:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:32:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:35:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:38:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:41:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:44:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:47:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:50:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:56:class:HALPadPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:57:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:61:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:66:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:69:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:72:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:75:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:78:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:81:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:84:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:87:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:90:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/joypad_plugin.py:93:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:11:class:LEDPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/led_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:13:class:NurbsEditorPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:14:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:23:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:26:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:29:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:32:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:35:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:38:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:41:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:44:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:47:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/nurbs_editor_plugin.py:50:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:11:class:FocusOverlayPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/overlay_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:11:class:GaugePlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:17:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:22:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:25:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:28:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:31:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:34:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:37:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:40:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:43:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:49:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_gauge_plugin.py:52:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:11:class:RoundProgressBarPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:34:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:37:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:40:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:43:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:46:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:49:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:55:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/round_progress_bar_plugin.py:58:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:114:function:updateWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:137:class:screenOptionsMenuEntry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:139:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:147:function:preferredEditAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:150:function:taskActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:153:function:updateLocation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:158:class:screenOptionsTaskMenuFactory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:160:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:163:function:createExtension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:17:class:LcncScreenOptionsPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:18:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:22:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:34:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:37:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:40:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:43:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:46:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:49:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:52:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:55:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:58:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:61:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:65:class:screenOptionsDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/screenoptions_plugin.py:67:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:104:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:110:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:114:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:118:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:122:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:126:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:130:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:135:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:139:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:144:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:149:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:156:class:CheckBoxPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:157:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:161:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:166:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:169:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:172:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:175:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:178:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:181:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:184:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:187:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:190:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:193:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:200:class:RadioButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:201:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:205:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:210:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:213:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:216:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:219:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:222:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:225:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:228:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:231:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:234:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:237:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:244:class:LCDNumberPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:245:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:249:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:254:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:257:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:260:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:263:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:266:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:269:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:272:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:275:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:278:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:281:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:288:class:SliderPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:289:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:293:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:298:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:301:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:304:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:307:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:310:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:313:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:316:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:319:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:31:class:IndicatedPushButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:322:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:334:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:341:class:LcncGridLayoutPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:342:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:346:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:351:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:354:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:357:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:360:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:363:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:366:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:369:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:372:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:375:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:378:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:385:class:GeneralHALOutputPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:386:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:390:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:395:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:398:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:401:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:404:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:407:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:410:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:413:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:416:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:419:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:422:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:429:class:GeneralHALInputPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:42:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:430:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:434:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:439:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:442:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:445:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:448:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:451:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:454:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:457:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:460:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:463:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:466:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:473:class:XEmbedPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:474:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:478:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:483:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:486:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:489:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:48:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:492:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:495:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:498:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:501:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:504:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:507:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:510:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:517:class:RadioAxisSelectorPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:518:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:522:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:527:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:52:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:530:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:533:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:536:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:539:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:542:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:545:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:548:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:551:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:554:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:561:class:AxisToolButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:562:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:566:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:56:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:571:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:574:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:577:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:580:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:583:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:586:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:589:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:592:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:595:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:598:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:605:class:OffsetToolButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:606:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:60:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:610:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:615:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:618:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:621:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:624:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:627:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:630:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:633:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:636:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:639:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:642:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:649:class:FileManagerPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:64:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:650:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:654:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:659:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:662:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:665:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:668:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:671:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:674:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:677:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:680:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:683:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:686:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:68:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:693:class:ImageSwitcherPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:694:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:698:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:703:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:706:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:711:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:714:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:717:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:720:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:723:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:726:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:729:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:73:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:741:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:748:class:StatusImageSwitcherPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:749:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:753:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:758:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:761:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:766:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:769:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:772:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:775:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:778:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:77:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:781:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:784:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:787:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:794:class:DialPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:795:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:799:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:804:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:807:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:810:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:813:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:816:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:819:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:822:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:825:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:828:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:82:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:831:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:838:class:DoubleScalePlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:839:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:843:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:848:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:851:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:854:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:857:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:860:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:863:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:866:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:869:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:872:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:875:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:87:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:882:class:MachineLogPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:883:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:887:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:892:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:895:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:898:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:901:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:904:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:907:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:910:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:913:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:916:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:919:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:93:class:PushButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/simplewidgets_plugin.py:97:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:11:class:StateLabelPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:23:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:26:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:29:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:32:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:35:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:38:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:41:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:44:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:50:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_label_plugin.py:53:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:11:class:StateLEDPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:51:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/state_led_plugin.py:54:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:11:class:StatusAdjustmentBarPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:23:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:26:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:31:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:34:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:37:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:40:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:43:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:46:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:52:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_adjustment_bar_plugin.py:55:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:109:function:count",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:112:function:property",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:123:function:indexOf",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:131:function:setChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:134:function:isChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:137:function:hasReset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:140:function:isAttribute",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:143:function:propertyGroup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:153:function:setProperty",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:172:function:getVisible",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:175:function:isVisible",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:181:function:propertyName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:184:function:do_alt_text_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:190:class:StatusLabelMenuEntry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:192:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:199:function:preferredEditAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:202:function:taskActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:205:function:updateOptions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:210:class:StatusLabelTaskMenuFactory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:211:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:214:function:createExtension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:223:class:TreeComboBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:224:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:23:class:StatusLabelPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:240:function:showPopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:244:function:hidePopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:252:function:selectIndex",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:256:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:25:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:265:function:addItems",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:274:function:select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:282:class:StatusLabelDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:283:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:30:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:320:function:buildtab1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:39:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:42:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:45:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:473:function:launchDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:480:function:selectionChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:48:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:499:function:updateWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:51:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:538:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:541:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:54:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:57:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:60:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:66:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:69:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:74:class:GstatLabelPropertySheetExtension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:75:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:80:function:createExtension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:91:class:GstatLabelPropertySheet",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_label_plugin.py:93:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:11:class:StatusSliderPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:18:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:23:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:26:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:29:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:32:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:35:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:38:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:41:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:44:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:50:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/status_slider_plugin.py:53:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:15:class:TabWidgetPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:16:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:20:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:25:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:28:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:31:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:34:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:37:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:40:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:43:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:46:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:49:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/tab_widget_plugin.py:65:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:15:class:SystemToolButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:16:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:20:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:25:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:28:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:31:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:34:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:37:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:40:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:43:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:46:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:49:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:52:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:58:class:ActionToolButtonPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:59:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:63:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:68:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:71:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:74:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:77:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:80:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:83:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:86:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:89:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:92:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/toolbutton_plugin.py:95:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:14:class:VersaProbePlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/versa_probe_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:14:class:VirtualKeyboardPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:15:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:19:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:24:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:27:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:30:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:33:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:36:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:39:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:42:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:45:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:48:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/virtualkeyboard_plugin.py:51:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:10:class:WebWidgetPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:11:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:15:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:20:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:23:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:26:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:29:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:32:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:35:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:38:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:41:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:44:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/web_widget_plugin.py:47:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:100:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:103:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:106:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:113:class:MDIHistoryPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:114:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:118:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:123:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:126:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:129:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:132:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:135:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:138:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:141:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:144:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:147:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:150:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:157:class:MDITouchyPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:158:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:162:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:167:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:170:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:173:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:176:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:179:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:182:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:185:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:188:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:191:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:194:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:201:class:GcodeEditorPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:202:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:206:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:211:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:214:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:217:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:220:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:223:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:226:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:229:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:232:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:235:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:238:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:245:class:GcodeDisplayPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:246:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:250:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:255:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:258:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:25:class:LcncDROLabelPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:261:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:264:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:267:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:26:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:270:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:273:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:276:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:279:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:282:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:288:class:GEditorPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:289:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:293:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:298:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:301:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:304:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:307:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:30:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:310:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:313:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:316:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:319:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:322:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:325:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:331:class:StatusStackedPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:332:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:336:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:341:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:344:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:347:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:350:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:353:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:356:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:359:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:35:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:362:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:365:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:368:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:375:class:WidgetSwitcherPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:376:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:380:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:385:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:388:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:38:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:391:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:394:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:397:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:400:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:403:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:406:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:409:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:417:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:41:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:424:class:OriginOffsetViewPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:425:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:429:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:434:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:437:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:440:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:443:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:446:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:449:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:44:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:452:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:455:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:458:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:461:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:468:class:ToolOffsetViewPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:469:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:473:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:478:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:47:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:481:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:484:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:487:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:490:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:493:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:496:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:499:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:502:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:505:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:50:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:512:class:MacroTabPlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:513:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:517:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:522:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:525:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:528:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:531:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:534:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:537:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:53:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:540:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:543:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:546:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:549:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:56:function:isContainer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:59:function:domXml",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:62:function:includeFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:69:class:MDILinePlugin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:70:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:74:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:79:function:isInitialized",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:82:function:createWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:85:function:name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:88:function:group",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:91:function:icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:94:function:toolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/plugins/widgets_plugin.py:97:function:whatsThis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1001:function:touchoff_finished",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1010:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1013:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1019:class:Progress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1020:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1027:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1034:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1037:function:nextphase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1043:function:done",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1047:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1065:class:FilterProgram",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1066:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1087:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1111:function:finish",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1126:function:error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:1153:function:mess",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:128:function:SET_MACHINE_UNHOMED",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:141:function:SET_AUTO_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:146:function:TOGGLE_LIMITS_OVERRIDE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:158:function:SET_MDI_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:161:function:SET_MANUAL_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:172:function:CALL_MDI_LIST",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:181:function:CALL_MDI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:189:function:CALL_MDI_WAIT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:216:function:CALL_INI_MDI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:230:function:CALL_OWORD",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:263:function:UPDATE_VAR_FILE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:267:function:OPEN_PROGRAM",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:291:function:SAVE_PROGRAM",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:30:class:_Lcnc_Action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:336:function:SET_AXIS_ORIGIN",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:347:function:SET_TOOL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:359:function:SET_DIRECT_TOOL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:369:function:RUN",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:378:function:STEP",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:386:function:ABORT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:389:function:PAUSE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:396:function:SET_MAX_VELOCITY_RATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:399:function:SET_RAPID_RATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:402:function:SET_FEED_RATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:405:function:SET_SPINDLE_RATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:409:function:SET_JOG_RATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:413:function:SET_JOG_RATE_FASTER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:419:function:SET_JOG_RATE_SLOWER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:425:function:SET_JOG_RATE_ANGULAR",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:429:function:SET_JOG_RATE_ANGULAR_FASTER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:42:function:SET_DEBUG_LEVEL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:435:function:SET_JOG_RATE_ANGULAR_SLOWER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:440:function:SET_JOG_INCR",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:446:function:SET_JOG_INCR_ANGULAR",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:452:function:SET_SPINDLE_ROTATION",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:455:function:SET_SPINDLE_FASTER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:45:function:SET_ESTOP_STATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:475:function:SET_SPINDLE_SLOWER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:495:function:SET_SPINDLE_STOP",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:498:function:SET_USER_SYSTEM",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:506:function:ZERO_G92_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:510:function:ZERO_ROTATIONAL_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:514:function:ZERO_G5X_OFFSET",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:524:function:RECORD_CURRENT_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:529:function:RESTORE_RECORDED_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:532:function:SET_SELECTED_JOINT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:538:function:SET_SELECTED_AXIS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:546:function:DO_JOG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:54:function:SET_MACHINE_STATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:568:function:JOG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:580:function:STOP_JOG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:585:function:TOGGLE_FLOOD",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:588:function:SET_FLOOD_ON",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:591:function:SET_FLOOD_OFF",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:594:function:TOGGLE_MIST",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:597:function:SET_MIST_ON",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:600:function:SET_MIST_OFF",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:603:function:RELOAD_TOOLTABLE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:606:function:TOGGLE_OPTIONAL_STOP",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:609:function:SET_OPTIONAL_STOP_ON",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:612:function:SET_OPTIONAL_STOP_OFF",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:615:function:TOGGLE_BLOCK_DELETE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:618:function:SET_BLOCK_DELETE_ON",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:621:function:SET_BLOCK_DELETE_OFF",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:624:function:RELOAD_DISPLAY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:627:function:SET_GRAPHICS_VIEW",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:63:function:TOGGLE_TELEOP_MODE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:640:function:SET_GRAPHICS_GRID_SIZE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:643:function:ADJUST_GRAPHICS_PAN",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:646:function:ADJUST_GRAPHICS_ROTATE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:649:function:SHUT_SYSTEM_DOWN_PROMPT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:665:function:SHUT_SYSTEM_DOWN_NOW",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:669:function:UPDATE_MACHINE_LOG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:66:function:SET_MOTION_TELEOP",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:674:function:CALL_DIALOG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:681:function:HIDE_POINTER",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:687:function:PLAY_SOUND",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:693:function:PLAY_ERROR",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:696:function:PLAY_DONE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:699:function:PLAY_READY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:702:function:PLAY_ATTENTION",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:705:function:PLAY_LOGIN",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:708:function:PLAY_LOGOUT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:711:function:SPEAK",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:714:function:BEEP",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:717:function:BEEP_RING",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:720:function:BEEP_START",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:723:function:SET_LATHE_MIRROR_X",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:730:function:UNSET_LATHE_MIRROR_X",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:738:function:DISABLE_AUTOREPEAT_KEYS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:742:function:ENABLE_AUTOREPEAT_KEYS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:747:function:SET_DISPLAY_MESSAGE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:751:function:SET_ERROR_MESSAGE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:754:function:SET_TEMPARARY_MESSAGE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:757:function:TOUCHPLATE_TOUCHOFF",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:77:function:SET_MACHINE_HOMING",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:784:function:ADD_WIDGET_TO_TAB",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:807:function:SET_BLUR",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:817:function:SET_TINT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:828:function:SET_SHADOW",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:841:function:GET_ABOUT_INFO",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:860:function:_step_jograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:877:function:get_jog_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:882:function:jnum_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:897:function:ensure_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:908:function:open_filter_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:915:function:_load_filter_result",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:926:function:_mktemp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:935:function:change_mode_after",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:939:function:command_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:953:function:generate_list",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:968:function:read_stdout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:973:function:read_stderror",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:978:function:parse_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_action.py:998:function:touchoff_started",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:26:class:_IStat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:27:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:523:function:get_error_safe_setting",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:536:function:get_safe_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:544:function:get_safe_int",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:551:function:convert_machine_to_metric",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:557:function:convert_machine_to_imperial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:563:function:convert_metric_to_machine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:569:function:convert_imperial_to_machine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:575:function:convert_9_metric_to_machine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:582:function:convert_9_imperial_to_machine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:589:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:592:function:convert_units_9",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:598:function:get_filter_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:605:function:get_all_valid_extensions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:618:function:get_filters_extensions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:635:function:get_qt_filter_extensions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:651:function:program_extension_valid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:659:function:get_jnum_from_axisnum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:668:function:check_known_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:686:function:is_in_known_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:692:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:695:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_istat.py:82:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:103:function:registerHalWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:106:function:getRegisteredHalWidgetList",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:110:function:keyPressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:113:function:keyReleaseEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:117:function:keyPressTrap",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:120:function:keyReleaseTrap",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:124:function:shutdown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:130:function:sync_qsettings",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:140:function:load_resources",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:141:function:qrccompile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:16:class:Trampoline",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:197:function:instance",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:20:function:__call__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:214:function:apply_styles",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:25:class:MyEventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:267:function:load_extension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:26:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:274:function:_load_handlers",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:279:function:add_handler",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:33:function:process_event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:348:function:call_user_command_",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:365:function:makeMainPage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:373:class:MainPage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:374:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:384:function:instance",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:400:function:load_extension",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:407:function:_load_handlers",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:412:function:add_handler",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:43:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:479:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:482:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:485:class:VCPWindow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:489:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:494:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:499:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:81:class:_VCPWindow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makegui.py:82:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:140:function:shutdown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:158:function:record_preference_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:173:function:set_preference_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:179:function:geometry_parsing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:180:function:go",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:207:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:210:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:38:class:QTPanel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_makepins.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:315:function:find_widget_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:332:function:find_image_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:348:function:find_embed_panel_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:36:class:_PStat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:374:function:find_embed_handler_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:403:function:find_screen_dirs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:407:function:find_panel_dirs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:411:function:find_vismach_files",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_pstat.py:74:function:set_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:111:function:_reload",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:194:function:CONVERT_TO_WEAR_TYPE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:252:function:CONVERT_TO_STANDARD_TYPE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:303:function:_save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:345:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:354:function:emit_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:35:class:_TStat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:361:function:periodic_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:68:function:GET_TOOL_INFO",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:73:function:GET_TOOL_ARRAY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:77:function:GET_TOOL_MODELS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:80:function:SAVE_TOOLFILE",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:83:function:ADD_TOOL",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qt_tstat.py:88:function:DELETE_TOOLS",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:12:class:HandlerClass",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:23:function:initialized__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:26:function:halbuttonclicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:29:function:estop_toggled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:36:function:machineon_toggled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:43:function:home_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/qtvcp_handler.py:50:function:get_handlers",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1001:function:get_jog_joint_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1003:function:reset_jog_joint_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1006:function:set_jog_selected_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1010:function:get_jog_selected_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1012:function:reset_jog_selected_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1015:function:set_jog_selected_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1019:function:get_jog_selected_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1021:function:reset_jog_selected_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1024:function:set_run",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1028:function:get_run",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1030:function:reset_run",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1033:function:set_run_from_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1037:function:get_run_from_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1039:function:reset_run_from_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1042:function:set_run_from_slot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1046:function:get_run_from_slot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1048:function:reset_run_from_slot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1052:function:set_abort",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1056:function:get_abort",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1058:function:reset_abort",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1061:function:set_pause",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1065:function:get_pause",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1067:function:reset_pause",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1070:function:set_step",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1074:function:get_step",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1076:function:reset_step",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1079:function:set_launch_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1083:function:get_launch_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1085:function:reset_launch_halmeter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1088:function:set_launch_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1092:function:get_launch_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1094:function:reset_launch_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1097:function:set_launch_halshow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1101:function:get_launch_halshow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1103:function:reset_launch_halshow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1106:function:set_launch_halscope",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1110:function:get_launch_halscope",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1112:function:reset_launch_halscope",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1115:function:set_launch_calibration",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1119:function:get_launch_calibration",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1121:function:reset_launch_calibration",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1124:function:set_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1128:function:get_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1130:function:reset_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1133:function:set_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1137:function:get_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1139:function:reset_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1142:function:set_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1146:function:get_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1148:function:reset_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1151:function:set_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1153:function:get_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1155:function:reset_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1158:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1161:function:get_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1163:function:reset_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1166:function:set_jog_incr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1170:function:get_jog_incr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1172:function:reset_jog_incr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1175:function:set_jog_rate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1179:function:get_jog_rate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1181:function:reset_jog_rate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1184:function:set_feed_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1188:function:get_feed_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1190:function:reset_feed_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1193:function:set_rapid_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1197:function:get_rapid_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1199:function:reset_rapid_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1202:function:set_max_velocity_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1206:function:get_max_velocity_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1208:function:reset_max_velocity_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1211:function:set_spindle_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1215:function:get_spindle_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1217:function:reset_spindle_over",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1220:function:set_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1224:function:get_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1226:function:reset_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1229:function:set_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1233:function:get_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1235:function:reset_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1238:function:set_spindle_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1242:function:get_spindle_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1244:function:reset_spindle_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1247:function:set_spindle_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1251:function:get_spindle_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1253:function:reset_spindle_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1256:function:set_spindle_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1260:function:get_spindle_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1262:function:reset_spindle_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1265:function:set_toggle_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1267:function:get_toggle_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1269:function:reset_toggle_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1272:function:set_limits_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1276:function:get_limits_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1278:function:reset_limits_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1281:function:set_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1285:function:get_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1287:function:reset_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1290:function:set_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1294:function:get_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1296:function:reset_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1299:function:set_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1303:function:get_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1305:function:reset_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1308:function:set_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1312:function:get_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1314:function:reset_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1317:function:set_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1321:function:get_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1323:function:reset_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1326:function:set_ini_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1330:function:get_ini_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1332:function:reset_ini_mdi_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1335:function:set_dro_absolute",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1339:function:get_dro_absolute",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1341:function:reset_dro_absolute",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1344:function:set_dro_relative",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1348:function:get_dro_relative",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1350:function:reset_dro_relative",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1353:function:set_dro_dtg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1357:function:get_dro_dtg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1359:function:reset_dro_dtg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1362:function:set_exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1366:function:get_exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1368:function:reset_exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1371:function:set_machine_log_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1375:function:get_machine_log_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1377:function:reset_machine_log_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1380:function:set_lathe_mirror_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1384:function:get_lathe_mirror_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1386:function:reset_lathe_mirror_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:138:function:nextCheckState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1390:function:set_incr_imperial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1392:function:get_incr_imperial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1394:function:reset_incr_imperial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1397:function:set_incr_mm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1399:function:get_incr_mm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1401:function:reset_incr_mm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1404:function:set_incr_angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1406:function:get_incr_angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1408:function:reset_incr_angle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1411:function:set_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1413:function:get_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1415:function:reset_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1418:function:set_float_alt",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1420:function:get_float_alt",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1422:function:reset_float_alt",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1425:function:set_view_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1429:function:get_view_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1431:function:reset_view_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1434:function:set_view_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1441:function:get_view_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1443:function:reset_view_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1446:function:set_command_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1448:function:get_command_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1450:function:reset_command_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1453:function:set_ini_mdi_num",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1455:function:get_ini_mdi_num",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1457:function:reset_ini_mdi_num",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1526:function:set_template_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1528:function:get_template_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1530:function:reset_template_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1547:function:set_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1550:function:get_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1552:function:reset_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1556:function:set_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1558:function:get_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1560:function:reset_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1568:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:1570:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:159:function:_designer_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:171:function:_safecheck",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:192:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:195:function:_checkincrements",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:209:function:homed_on_loaded_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:213:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:217:function:limits_override_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:227:function:spindle_control_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:436:function:safecheck",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:450:function:action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:45:class:ActionButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:709:function:updateRunFromLine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:713:function:updateRunFromLine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:721:function:jog_selected_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:736:function:jog_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:752:function:incr_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:785:function:setText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:792:function:_set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:796:function:_set_alt_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:803:function:setMDILabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:829:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:852:function:set_estop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:856:function:get_estop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:858:function:reset_estop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:861:function:set_machine_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:865:function:get_machine_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:867:function:reset_machine_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:870:function:set_home",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:874:function:get_home",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:876:function:reset_home",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:879:function:set_unhome",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:883:function:get_unhome",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:885:function:reset_unhome",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:888:function:set_home_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:892:function:get_home_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:894:function:reset_home_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:897:function:set_unhome_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:901:function:get_unhome_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:903:function:reset_unhome_select",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:907:function:set_zero_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:911:function:get_zero_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:913:function:reset_zero_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:916:function:set_zero_g5x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:920:function:get_zero_g5x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:922:function:reset_zero_g5x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:925:function:set_zero_g92",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:929:function:get_zero_g92",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:931:function:reset_zero_g92",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:934:function:set_zero_zrot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:938:function:get_zero_zrot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:940:function:reset_zero_zrot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:943:function:set_load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:947:function:get_load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:949:function:reset_load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:952:function:set_macro_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:956:function:get_macro_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:958:function:reset_macro_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:961:function:set_origin_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:965:function:get_origin_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:967:function:reset_origin_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:970:function:set_tool_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:974:function:get_tool_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:976:function:reset_tool_offset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:979:function:set_camview_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:983:function:get_camview_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:985:function:reset_camview_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:988:function:set_jog_joint_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:992:function:get_jog_joint_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:994:function:reset_jog_joint_pos",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button.py:997:function:set_jog_joint_neg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:27:class:RoundButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:36:function:action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:40:function:resizeEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:44:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:62:function:setImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:64:function:getImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:66:function:resetImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:69:function:setFalseImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:71:function:getFalseImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:73:function:resetFalseImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_button_round.py:80:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:38:class:ActionToolButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:43:function:buildMenu",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:53:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:54:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:59:function:recordView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:62:function:setView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:74:function:setViewAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:76:function:getViewAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/action_tool_button.py:81:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:123:function:on_click_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:128:function:on_click_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:132:function:on_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:135:function:on_click_set_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:142:function:timerEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:152:function:_setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:157:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:169:function:setHigh",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:172:function:setLow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:175:function:setMaximum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:180:function:setMinimum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:185:function:setStep",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:188:class:StatusAdjustmentBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:189:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:203:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:246:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:252:function:_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:275:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:282:function:setrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:286:function:getrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:288:function:resetrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:291:function:setfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:295:function:getfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:297:function:resetfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:300:function:setspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:304:function:getspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:306:function:resetspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:309:function:setjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:313:function:getjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:315:function:resetjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:318:function:setjograteangular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:322:function:getjograteangular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:324:function:resetjograteangular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:327:function:setmaxv",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:331:function:getmaxv",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:333:function:resetmaxv",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:336:function:setshowtoggle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:338:function:getshowtoggle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:340:function:resetshowtoggle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:343:function:setsettingmenu",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:345:function:getsettingmenu",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:347:function:resetsettingmenu",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:352:function:settexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:355:function:gettexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:357:function:resettexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:360:function:setsteprate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:362:function:getsteprate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:364:function:resetsteprate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:383:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:385:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:389:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:44:class:LabeledBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:45:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:54:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:61:function:drawText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:67:class:HAdjustmentBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:69:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/adjustment_bar.py:87:function:buildWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:105:function:_enableGroup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:111:function:Zero",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:118:function:SetOrigin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:130:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:141:function:Divide",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:153:function:Last",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:161:function:Home",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:167:function:Unhome",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:174:function:_a_from_j",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:189:function:selectJoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:214:function:ChangeState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:230:function:modeChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:238:function:_switch_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:250:function:set_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:254:function:get_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:256:function:reset_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:260:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:263:function:get_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:265:function:reset_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:269:function:set_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:271:function:get_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:273:function:reset_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:277:function:set_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:279:function:get_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:281:function:reset_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:285:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:287:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:291:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:40:class:AxisToolButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:41:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:84:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/axis_tool_button.py:85:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:173:function:setSteps",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:192:function:value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:197:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:204:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:210:function:minimum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:213:function:maximum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:216:function:setRange",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:220:function:setFormat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:223:function:getInvertedAppearance",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:225:function:setInvertedAppearance",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:228:function:resetInvertedAppearance",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:22:class:Bar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:238:function:set_step_color_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:244:function:get_step_color_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:246:function:reset_step_color_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:24:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:250:function:getBackgroundColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:254:function:setBackgroundColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:258:function:getMax",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:260:function:setMax",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:262:function:resetMax",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:265:function:getMin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:267:function:setMin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:269:function:resetMin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:272:function:getVertical",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:274:function:setVertical",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:277:function:resetVertical",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:291:class:HALPinType",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:297:class:HalBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:306:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:311:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:324:function:updateDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:327:function:set_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:329:function:get_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:331:function:reset_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:334:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:336:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:338:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/bar.py:45:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:113:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:114:function:homed_on_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:146:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:170:function:start_process",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:179:function:start_probe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:196:function:process_started",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:199:function:read_stdout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:204:function:read_stderror",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:209:function:process_finished",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:214:function:parse_input",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:243:function:set_statusbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:251:function:probe_help_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:254:function:cmb_probe_select_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:257:function:probe_btn_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:263:function:boss_pocket_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:270:function:ridge_valley_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:277:function:cal_btn_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:284:function:clear_results_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:288:function:clear_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:294:function:clear_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:300:function:clear_all",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:309:function:get_parms",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:316:function:show_results",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:326:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:329:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:332:class:HelpDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:333:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:346:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:351:function:buildWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:389:function:next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:418:function:close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:422:function:showDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:44:class:BasicProbe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/basic_probe.py:45:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:129:function:digitClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:142:function:unaryOperatorClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:163:function:additiveOperatorClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:17:class:Calculator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:190:function:multiplicativeOperatorClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:207:function:equalClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:20:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:232:function:pointClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:241:function:changeSignClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:252:function:axisClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:275:function:axisTriggered",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:278:function:backspaceClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:289:function:convertClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:310:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:317:function:clearAll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:325:function:clearMemory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:328:function:readMemory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:332:function:setMemory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:336:function:addToMemory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:340:function:createButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:349:function:createAxisButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:365:function:abortOperation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:369:function:getDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/calculator.py:379:function:calculate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:101:function:wheelEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:122:function:mousePressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:134:function:mouseDoubleClickEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:142:function:limitChecks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:151:function:nextFrameSlot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:176:function:convertToRGB",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:180:function:convertToGray",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:183:function:blur",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:186:function:canny",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:189:function:makeImage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:194:function:makeCVImage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:197:function:rescaleFrame",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:203:function:zoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:226:function:findCircles",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:244:function:blobInit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:274:function:findBlob",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:290:function:showEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:302:function:hideEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:309:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:319:function:drawText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:335:function:drawCircle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:346:function:drawCrossHair",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:361:function:rotation_increments_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:372:function:setCircleColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:375:function:setCrossColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:378:function:setPointerColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:381:function:saveImage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:394:function:set_wheel_rotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:396:function:get_wheel_rotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:398:function:reset_wheel_rotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:400:function:set_camnum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:402:function:get_camnum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:404:function:reset_camnum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:410:class:WebcamVideoStream",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:411:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:432:function:isOpened",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:438:function:openStream",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:448:function:start",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:453:function:_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:463:function:read",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:467:function:stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:472:function:writeFrame",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:476:function:list_ports",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:509:function:jump",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:55:class:CamView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:56:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/camview_widget.py:91:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:103:function:get_is_not_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:105:function:reset_is_not_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:110:function:set_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:112:function:get_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:114:function:reset_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:118:class:JointEnableWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:119:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:128:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:138:function:modeChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:152:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:159:function:set_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:161:function:get_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:163:function:reset_joint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:166:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:169:function:get_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:171:function:reset_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:174:function:set_joint_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:178:function:get_joint_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:180:function:reset_joint_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:183:function:set_axis_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:187:function:get_axis_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:189:function:reset_axis_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:192:function:set_axis_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:194:function:get_axis_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:196:function:reset_axis_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:199:function:set_joint_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:201:function:get_joint_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:203:function:reset_joint_available",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:217:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:219:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:35:class:StateEnableGridLayout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:48:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:63:function:idle_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:79:function:set_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:81:function:get_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:83:function:reset_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:88:function:set_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:92:function:get_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:94:function:reset_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/container_widgets.py:99:function:set_is_not_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:126:function:attachTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:165:class:DetachedTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:168:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:184:function:event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:19:function:setMovable",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:200:function:closeEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:206:class:TabBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:210:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:227:function:mouseDoubleClickEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:236:function:mousePressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:254:function:mouseMoveEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:28:function:moveTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:305:function:dragEnterEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:319:function:dropEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:323:class:SurfViewer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:324:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:45:function:detachTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:5:class:DetachTabWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:66:function:attachTab1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/detach_tabs.py:6:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:134:function:record_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:20:class:GeometryMixin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:21:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:26:function:get_default_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:30:function:set_default_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:42:function:get_current_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:49:function:read_preference_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialogMixin.py:56:function:set_geometry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1005:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1010:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1028:function:close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:102:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1032:function:load_dialog_nonblocking",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1036:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1048:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1054:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1056:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1059:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1061:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1063:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1066:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1068:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1070:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1081:class:MacroTabDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1082:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1108:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1115:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:111:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1124:function:_close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1130:function:_run",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1134:function:_setTitle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1137:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1151:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1157:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1159:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1162:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1164:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1166:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1169:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1171:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1173:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1183:class:VersaProbeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1184:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1203:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1208:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1211:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1217:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1220:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1233:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1239:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1241:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1244:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1246:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1248:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1251:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1253:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1255:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1265:class:EntryDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1266:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1298:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1307:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1318:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1335:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1379:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1381:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1383:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1386:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1388:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1390:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1393:function:set_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1395:function:get_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1397:function:reset_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1408:class:KeyboardDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1409:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:141:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1434:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1448:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1465:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1492:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1494:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1496:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1499:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1501:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1503:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1506:function:set_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1508:function:get_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1510:function:reset_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1522:class:CalculatorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1523:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1535:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1549:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1571:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1587:function:accept",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1600:function:reject",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1604:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1606:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1608:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1611:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1613:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1615:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1624:class:MachineLogDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1625:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1636:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1646:function:buildWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1678:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1692:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1707:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1709:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1711:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1714:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1716:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1718:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1729:class:RunFromLineDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1730:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1748:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1757:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1771:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1787:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1806:function:accept",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1813:function:Clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1818:function:preset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1829:class:AboutDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1830:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1843:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1849:function:buildWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1861:function:setText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1870:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1884:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1899:function:accept",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1903:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1905:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1907:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1910:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1912:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1914:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:1924:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:235:function:forceDetailsOpen",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:251:function:qualifiedReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:260:function:showEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:273:function:msgbtn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:305:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:311:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:313:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:316:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:318:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:320:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:323:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:325:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:327:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:337:class:CloseDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:338:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:347:class:ToolDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:348:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:367:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:393:function:tool_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:440:function:external_acknowledge",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:451:function:_processChange",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:470:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:505:function:showEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:510:function:msgbtn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:527:function:setFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:529:function:getFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:531:function:resetFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:536:function:setUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:538:function:getUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:540:function:resetUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:548:class:FileDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:549:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:575:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:587:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:609:function:showdialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:612:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:650:function:save_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:689:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:695:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:697:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:700:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:702:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:704:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:710:function:getLoadIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:712:function:setLoadIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:714:function:resetLoadIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:717:function:getSaveIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:719:function:setSaveIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:721:function:resetSaveIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:72:class:LcncDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:730:class:OriginOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:731:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:771:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:776:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:786:function:zeroPress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:787:function:calluser",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:791:function:zeroAxis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:794:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:79:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:802:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:807:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:809:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:817:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:823:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:825:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:828:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:830:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:832:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:835:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:837:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:839:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:850:class:ToolOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:851:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:900:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:904:function:_external_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:910:function:addTool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:913:function:deleteTool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:920:function:zeroPress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:921:function:calluser",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:925:function:zeroAxis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:928:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:938:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:940:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:948:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:954:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:956:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:959:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:961:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:963:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:966:function:getIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:968:function:setIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:970:function:resetIdName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:981:class:CamViewDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dialog_widget.py:982:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:103:function:motion_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:115:function:update_user",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:118:function:update_rotation",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:122:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:146:function:_status_reference_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:149:function:_switch_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:153:function:update_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:161:function:_switch_modes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:169:function:set_to_inch",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:176:function:set_to_mm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:183:function:set_to_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:188:function:set_to_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:193:function:set_joint_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:210:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:219:function:set_force_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:224:function:get_force_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:226:function:reset_force_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:230:function:set_force_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:235:function:get_force_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:237:function:reset_force_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:241:function:set_follow_m7m8_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:245:function:get_follow_m7m8_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:247:function:reset_follow_m7m8_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:251:function:set_follow_reference",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:253:function:get_follow_reference",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:255:function:reset_follow_reference",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:261:function:setjoint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:267:function:getjoint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:269:function:resetjoint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:274:function:setreference_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:276:function:getreference_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:278:function:resetreference_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:282:function:setmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:285:function:getmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:287:function:resetmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:291:function:setimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:294:function:getimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:296:function:resetimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:300:function:setangulartexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:303:function:getangulartexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:305:function:resetangulartexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:309:function:setisHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:311:function:getisHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:319:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:321:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:325:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:38:class:DROLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:65:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/dro_widget.py:97:function:_home_status_polish",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:180:function:reject",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:183:function:buttonClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:204:function:show_input_panel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:211:function:update_panel_position",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:233:class:TouchInterface",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:234:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:243:function:childEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:248:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:259:function:callDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:28:class:MyFlatPushButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:29:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:34:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:37:class:SoftInputWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:38:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/entry_widget.py:61:function:do_layout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/fake_status.py:168:function:poll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/fake_status.py:26:class:fakeStatus",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/fake_status.py:27:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:200:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:233:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:254:function:fillCombobox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:258:function:folderChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:263:function:updateDirectoryView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:273:function:filterChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:277:function:listClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:290:function:onUserClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:293:function:onMediaClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:297:function:onJumpClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:314:function:jumpTriggered",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:328:function:onActionClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:34:class:FileManager",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:351:function:_getPathActivated",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:364:function:recordCopyPath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:374:function:paste",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:384:function:addAction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:390:function:showList",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:398:function:showTable",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:401:function:showCopyControls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:411:function:showMediaDir",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:414:function:showUserDir",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:417:function:copyFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:428:function:scroll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:437:function:up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:442:function:down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:445:function:select_row",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:479:function:getCurrentSelected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:492:function:load",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:505:function:recordBookKeeping",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:513:function:connectSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:534:function:setDoubleClickSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:537:function:getDoubleClickSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:539:function:resetDoubleClickSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:545:function:setShowListView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:548:function:getShowListView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:550:function:resetShowListView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/file_manager.py:66:function:initUI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1000:function:openReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1004:function:pythonLexerCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1006:function:pythonLexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1009:function:redoCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1011:function:redo",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1014:function:replaceCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1016:function:replace",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1022:function:saveCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1024:function:save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1026:function:saveReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1032:function:undoCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1034:function:undo",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1039:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1045:function:editMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1050:function:readOnlyMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1055:function:getFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1060:function:getSaveFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1066:function:returnFromDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1078:function:killCheck",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1087:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1090:function:select_lineup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1093:function:select_linedown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1096:function:select_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1099:function:jump_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1102:function:get_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1105:function:set_margin_metric",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1108:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1111:function:isReadOnly",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1117:function:set_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1119:function:get_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1121:function:reset_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1127:function:set_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1129:function:get_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:1131:function:reset_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:164:class:EditorBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:198:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:255:function:set_lexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:275:function:refresh_styles",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:283:function:set_font_colors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:291:function:set_margin_width",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:294:function:set_margin_metric",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:299:function:on_lines_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:306:function:on_margin_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:321:function:mouseDoubleClickEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:324:function:new_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:327:function:load_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:341:function:save_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:348:function:replace_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:351:function:search",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:354:function:search_Next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:361:function:getColor0",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:363:function:setColor0",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:371:function:getColor1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:373:function:setColor1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:379:function:getColor2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:381:function:setColor2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:387:function:getColor3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:389:function:setColor3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:395:function:getColor4",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:397:function:setColor4",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:403:function:getColor5",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:405:function:setColor5",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:411:function:getColor6",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:413:function:setColor6",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:419:function:getColor7",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:421:function:setColor7",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:428:function:getColorMarginsForeground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:430:function:setColorMarginsForeground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:436:function:getColorBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:438:function:setColorBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:449:function:setColorMarginsBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:452:function:getColorMarginsBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:457:function:getColorSelectionBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:459:function:setColorSelectionBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:464:function:getColorSelectionForeground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:466:function:setColorSelectionForeground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:472:function:getColorMarkerBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:474:function:setColorMarkerBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:480:function:setDefaultFont",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:489:function:getDefaultFont",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:493:function:getFont0",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:495:function:setFont0",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:502:function:getFont1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:504:function:setFont1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:510:function:getFont2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:512:function:setFont2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:518:function:getFont3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:520:function:setFont3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:526:function:getFont4",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:528:function:setFont4",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:534:function:getFont5",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:536:function:setFont5",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:542:function:getFont6",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:544:function:setFont6",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:550:function:getFont7",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:552:function:setFont7",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:558:function:getFontMargins",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:560:function:setFontMargins",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:566:function:getSyntaxHighlightEnabled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:568:function:setSyntaxHighlightEnabled",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:581:class:GcodeDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:585:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:597:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:620:function:load_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:634:function:reload_last",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:644:function:load_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:64:class:GcodeLexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:654:function:load_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:663:function:load_preference",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:668:function:external_highlight_request",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:67:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:681:function:moveMarker",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:689:function:highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:702:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:705:function:run_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:708:function:set_line_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:711:function:line_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:721:function:select_lineup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:727:function:select_linedown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:733:function:jump_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:746:function:zoomIn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:749:function:zoomOut",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:756:function:set_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:758:function:get_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:760:function:reset_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:766:function:set_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:768:function:get_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:770:function:reset_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:778:class:GcodeEditor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:781:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:85:function:language",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:879:function:createGroup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:88:function:description",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:91:function:styleText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:943:function:caseCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:945:function:case",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:949:function:exitCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:951:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:957:function:findCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:959:function:find",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:964:function:previousCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:966:function:previous",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:973:function:gcodeLexerCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:975:function:gcodeLexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:978:function:nextCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:980:function:next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:986:function:newCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:988:function:new",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:996:function:openCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_editor.py:998:function:open",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:118:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:131:function:highlight_graphics",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:137:function:clear_highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:140:function:set_view_signal",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:212:function:load_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:220:function:set_metric_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:224:function:set_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:228:function:set_view",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:239:function:reloadfile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:248:function:updateSignals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:262:function:updateMouseMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:295:function:report_gcode_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:305:function:update_highlight_variable",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:314:function:select_fire",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:323:function:user_plot",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:326:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:330:function:get_joints_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:338:function:setview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:341:function:getview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:343:function:resetview",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:348:function:setdro",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:351:function:getdro",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:356:function:setdtg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:359:function:getdtg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:364:function:setmetric",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:367:function:getmetric",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:372:function:setoverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:375:function:getoverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:377:function:resetoverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:382:function:setShowOffsets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:385:function:getShowOffsets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:390:function:setShowSmallOrigin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:393:function:getShowSmallOrigin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:397:function:getOverlayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:399:function:setOverlayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:403:function:resetOverlayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:407:function:getBackgroundColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:409:function:setBackgroundColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:415:function:resetBackgroundColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:425:function:setGradientBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:428:function:getGradientBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:432:function:getJogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:434:function:setJogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:441:function:resetJogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:446:function:getFeedColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:448:function:setFeedColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:456:function:resetFeedColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:461:function:getRapidColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:463:function:setRapidColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:470:function:resetRapidColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:476:function:setInhibitControls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:479:function:getInhibitControls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:481:function:resetInhibitControls",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:487:function:setMouseButtonMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:490:function:getMouseButtonMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:492:function:resetMouseButtonMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:498:function:setMouseWheelInvertZoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:500:function:getMouseWheelInvertZoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:502:function:resetMouseWheelInvertZoom",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:50:class:GCodeGraphics",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:51:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:89:function:addTimer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/gcode_graphics.py:94:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:140:function:createActions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:222:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:236:function:caseCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:238:function:case",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:242:function:exitCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:244:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:256:function:findCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:258:function:find",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:263:function:previousCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:265:function:previous",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:272:function:gcodeLexerCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:274:function:gcodeLexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:277:function:nextCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:279:function:next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:285:function:newCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:287:function:new",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:295:function:openCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:297:function:open",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:299:function:openReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:303:function:pythonLexerCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:305:function:pythonLexer",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:308:function:redoCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:310:function:redo",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:313:function:replaceCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:315:function:replace",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:321:function:saveCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:323:function:save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:325:function:saveReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:331:function:undoCall",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:333:function:undo",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:338:function:saveSettings",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:343:function:restoreSettings",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:357:function:editMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:375:function:readOnlyMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:389:function:getFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:394:function:getSaveFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:400:function:popEntry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:412:function:returnFromDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:431:function:killCheck",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:442:function:emit_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:445:function:select_lineup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:448:function:select_linedown",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:451:function:select_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:454:function:jump_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:457:function:get_line",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:460:function:set_margin_width",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:463:function:set_font",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:468:function:set_background_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:471:function:isReadOnly",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:478:function:set_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:480:function:get_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:482:function:reset_auto_show_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:488:function:set_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:490:function:get_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:492:function:reset_auto_show_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:498:function:set_show_editor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:510:function:get_show_editor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:512:function:reset_show_editor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:57:class:GEditor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/geditor.py:60:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:100:function:reset_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:103:function:set_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:107:function:get_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:109:function:reset_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:122:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:124:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:33:class:GeneralHALInput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:45:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:61:function:pin_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:71:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:78:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:80:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:82:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:85:function:set_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:89:function:get_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:91:function:reset_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:94:function:set_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_input.py:98:function:get_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:101:function:set_istate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:103:function:get_istate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:105:function:reset_istate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:108:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:110:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:112:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:115:function:set_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:119:function:get_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:121:function:reset_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:124:function:set_s32_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:128:function:get_s32_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:131:function:set_float_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:133:function:get_float_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:135:function:reset_float_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:138:function:set_initial_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:140:function:get_initial_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:142:function:reset_initial_float",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:145:function:set_s32_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:147:function:get_s32_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:149:function:reset_s32_scale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:165:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:167:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:33:class:GeneralHALOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:34:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:44:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:63:function:_pin_bit_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:67:function:_pin_value_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:77:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:86:function:pin_bit_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:91:function:pin_value_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:95:function:set_pin_true",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/general_hal_output.py:98:function:set_pin_false",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:105:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:107:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:109:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:112:function:set_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:116:function:get_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:118:function:reset_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:121:function:set_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:125:function:get_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:127:function:reset_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:130:function:set_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:134:function:get_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:136:function:reset_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:139:function:set_use_multi_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:143:function:get_use_multi_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:145:function:reset_use_multi_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:148:function:set_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:150:function:get_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:152:function:reset_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:155:function:set_multi_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:157:function:get_multi_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:159:function:reset_multi_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:176:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:178:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:33:class:HALLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:34:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:45:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:65:function:_setText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:73:function:_changeText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:84:function:setDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:88:function:selectLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_label.py:97:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:115:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:124:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:176:function:setShowTypes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:183:function:setPinTypes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:194:function:setSignalTypes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:209:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:211:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:215:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:32:class:TreeComboBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:52:function:showPopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:57:function:hidePopup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:62:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:71:function:addItems",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:88:function:getSelectionData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:92:function:selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/hal_selectionbox.py:99:class:HALSelectionBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:100:function:reset_image_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:104:function:set_image_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:106:function:get_image_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:108:function:reset_image_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:116:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:118:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:123:class:StatusImageSwitcher",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:125:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:144:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:174:function:_designerInit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:182:function:switch_on_spindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:192:function:switch_on_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:196:function:switch_on_axis_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:201:function:switch_on_axis_unhomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:206:function:switch_on_hard_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:228:function:switch_on_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:231:function:switch_on_command_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:234:function:switch_on_feedmode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:238:function:switch_on_spindlemode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:250:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:262:function:set_spindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:266:function:get_spindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:268:function:reset_spindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:273:function:set_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:277:function:get_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:279:function:reset_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:284:function:set_axis_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:288:function:get_axis_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:290:function:reset_axis_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:296:function:set_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:300:function:get_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:302:function:reset_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:307:function:set_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:311:function:get_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:313:function:reset_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:319:function:set_command_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:323:function:get_command_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:325:function:reset_command_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:331:function:set_feedmode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:335:function:get_feedmode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:337:function:reset_feedmode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:342:function:set_spindlemode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:346:function:get_spindlemode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:348:function:reset_spindlemode_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:353:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:356:function:get_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:358:function:reset_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:366:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:368:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:374:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:44:class:ImageSwitcher",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:54:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:57:function:_designerInit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:61:function:show_image_by_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:90:function:set_default_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:93:function:set_image_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/image_switcher.py:98:function:get_image_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:118:function:parse_angular_increment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:127:function:parse_increment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:154:function:conversion",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:175:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:182:function:set_linear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:184:function:get_linear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:186:function:reset_linear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:36:class:JogIncrements",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:45:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:59:function:_switch_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:68:function:_checkincrements",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/jog_increments.py:91:function:selectionchange",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:114:function:_pressedOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:118:function:_releasedOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:122:function:get_active_btn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:130:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:142:function:create_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:169:function:draw_painter_paths",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:184:function:draw_icons",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:226:function:draw_highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:245:function:reset_highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:252:function:set_highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:286:function:set_button_icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:288:function:set_button_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:291:function:set_icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:304:function:set_tooltip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:308:function:setLight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:30:class:IndicatorPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:315:function:set_HighlightPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:321:function:get_HighlightPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:324:function:reset_HighlightPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:333:function:set_colorStateTrue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:336:function:set_colorStateFalse",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:340:function:set_colorState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:344:function:get_colorState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:347:function:reset_colorState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:353:function:setLeftImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:357:function:getLeftImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:362:function:resetLeftImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:365:function:setRightImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:369:function:getRightImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:371:function:resetRightImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:374:function:setCenterImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:378:function:getCenterImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:380:function:resetCenterImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:383:function:setTopImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:387:function:getTopImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:389:function:resetTopImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:392:function:setBottomImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:396:function:getBottomImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:398:function:resetBottomImagePath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:408:function:getFont",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:40:class:JoyPad",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:410:function:setFont",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:412:function:resetFont",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:416:function:setLeftText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:421:function:getLeftText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:423:function:resetLeftText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:427:function:setRightText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:432:function:getRightText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:434:function:resetRightText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:438:function:setCenterText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:443:function:getCenterText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:445:function:resetCenterText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:449:function:setTopText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:454:function:getTopText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:456:function:resetTopText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:460:function:setBottomText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:465:function:getBottomText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:467:function:resetBottomText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:478:function:set_true_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:482:function:set_true_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:486:function:get_true_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:489:function:reset_true_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:494:function:set_false_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:498:function:set_false_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:502:function:get_false_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:505:function:reset_false_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:509:function:set_text_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:512:function:get_text_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:514:function:reset_text_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:523:function:btn_pressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:527:function:btn_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:531:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:534:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:537:class:HALPinType",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:543:class:HALPad",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:553:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:56:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:572:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:588:function:_pressedOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:605:function:_releasedOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:622:function:setPinTrueOutput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:632:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:634:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:636:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:639:function:set_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:642:function:get_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:644:function:reset_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/joypad.py:91:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:117:function:minimumSizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:120:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:123:function:getDiameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:126:function:set_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:128:function:get_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:130:function:reset_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:134:function:setDiameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:138:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:142:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:146:function:getOffColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:150:function:setOffColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:154:function:getBorderColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:158:function:setBorderColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:162:function:getAlignment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:166:function:setAlignment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:170:function:resetAlignment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:175:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:179:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:182:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:186:function:toggleState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:190:function:isFlashing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:194:function:setFlashing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:207:function:setFlashState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:211:function:getFlashState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:214:function:getFlashRate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:218:function:setFlashRate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:222:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:224:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:226:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:32:class:LED",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:33:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:55:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:70:function:change_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/led_widget.py:80:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:102:function:set_machine_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:106:function:get_machine_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:108:function:reset_machine_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:112:function:set_integrator_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:116:function:get_integrator_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:118:function:reset_integrator_log",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:126:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:128:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:132:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:38:class:MachineLog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:48:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:54:function:_periodicCheck",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:67:function:md5sum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:75:function:loadLog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:84:function:loadIntegratorLog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/machine_log.py:95:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:102:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:105:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:121:class:MacroTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:122:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:163:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:166:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:188:function:buildStack",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:189:function:checkIfFloat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:305:function:_buildMenuPage",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:348:function:_buildErrorTab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:364:function:_findMacros",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:440:function:runMacro",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:463:function:runChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:467:function:saveChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:471:function:loadChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:475:function:closeChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:479:function:menuChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:489:function:menuButtonPress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:490:function:calluser",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:505:function:loadPressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:508:function:savePressed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:511:function:openReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:52:class:CustomButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:537:function:saveReturn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:53:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:559:function:setTitle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:563:function:getNumbers",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:572:function:getFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:583:function:getSaveFileName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:590:function:returnFromDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:609:function:set_style",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:62:function:setLayerNumber",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:657:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:659:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:72:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:87:class:CustomSVG",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:88:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/macro_widget.py:94:function:setLayerNumber",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:105:function:selectionChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:111:function:getSelected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:119:function:activated",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:124:function:run_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:128:function:select_row",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:156:function:line_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:159:function:line_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:168:function:set_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:170:function:get_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:172:function:reset_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:39:class:MDIHistory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:40:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:75:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_history.py:84:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:145:function:external_line_selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:150:function:keyPressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:157:function:line_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:161:function:line_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:165:function:setp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:212:function:unlinkp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:223:function:net",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:239:function:spindle_inhibit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:243:function:inhibit_spindle_commands",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:255:function:error_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:259:class:MDILine",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:260:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:270:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:282:function:request_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:291:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:308:function:set_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:310:function:get_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:312:function:reset_soft_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:318:function:set_dialog_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:320:function:get_dialog_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:322:function:reset_dialog_keyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:329:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:45:class:MDI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:70:function:getMDIText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_line.py:74:function:submit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:102:function:add_macros",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:110:function:get_description",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:113:function:get_words",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:133:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:136:function:set_word",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:139:function:set_polar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:142:function:issue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:170:class:MDITouchy",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:171:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:189:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:190:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:204:function:gxClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:207:function:grClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:210:function:mClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:213:function:tClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:216:function:pointClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:221:function:minusClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:231:function:nextClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:236:function:pointClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:241:function:clearClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:245:function:backClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:250:function:numKeyClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:256:function:setToolClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:260:function:setOriginClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:263:function:macroClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:266:function:calcClicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:277:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:287:function:run_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:291:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:300:function:fill_out",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:310:function:not_editing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:314:function:editing",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:320:function:get_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:323:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:337:function:cycle_ocodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:349:function:set_tool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:34:class:mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:367:function:set_origin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:384:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/mdi_touchy.py:386:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:102:function:setGraphicsDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:114:function:set_spinbuttons_default",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:138:function:checkChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:148:function:spinChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:152:function:gridSpinChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:157:function:block",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:159:function:unblock",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:162:function:invertX",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:171:function:invertY",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:180:function:resetView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:183:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:237:function:finalizeGcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:243:function:updateDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:246:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:254:function:on_makeButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:268:function:on_applyButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:273:function:on_closeButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:276:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:278:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:285:function:report_gcode_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:62:class:NurbsEditor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/nurbs_editor.py:63:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:108:function:zeroOffset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:116:function:setOffset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:125:function:adjustOffset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:134:function:setDirectOffset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:143:function:last",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:151:function:_get_current_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:165:function:_switch_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:177:function:set_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:180:function:get_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:182:function:reset_axis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:187:function:set_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:189:function:get_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:191:function:reset_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:195:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:197:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:201:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:38:class:OffsetToolButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:70:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:71:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/offset_tool_button.py:88:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:112:function:_convert_system",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:117:function:currentTool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:119:function:metricMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:122:function:createTable",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:166:function:showSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:186:function:callTextDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:195:function:callDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:205:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:218:function:highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:224:function:reload_offsets",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:287:function:read_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:331:function:dataChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:376:function:periodic_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:393:function:set_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:395:function:get_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:397:function:reset_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:401:function:set_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:403:function:get_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:405:function:reset_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:409:function:setmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:411:function:getmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:413:function:resetmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:417:function:setimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:419:function:getimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:421:function:resetimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:425:function:getColorHighlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:427:function:setColorHighlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:435:class:MyTableModel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:436:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:448:function:rowCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:451:function:columnCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:456:function:data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:472:function:flags",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:47:class:OriginOffsetView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:485:function:setData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:48:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:508:function:headerData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:65:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/origin_offsetview.py:99:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:107:function:event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:126:class:FocusOverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:127:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:149:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:181:function:_status_response",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:203:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:216:function:updateProgress",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:228:function:colorBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:233:function:draw_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:240:function:drawText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:257:function:box",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:294:function:okChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:296:function:cancelChecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:306:function:setState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:312:function:getState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:314:function:resetState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:317:function:getOverayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:320:function:setOverayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:322:function:resetOverayColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:325:function:setShowText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:328:function:getShowText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:330:function:resetShowText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:334:function:setshow_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:338:function:getshow_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:340:function:resetshow_image",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:343:function:set_image_transp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:347:function:get_image_transp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:349:function:reset_image_transp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:352:function:setshow_buttons",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:357:function:getshow_buttons",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:359:function:resetshow_buttons",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:362:function:setimage_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:369:function:getimage_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:371:function:resetimage_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:386:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:403:function:newOk",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:410:function:pop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:46:class:OverlayWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:47:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:65:function:newParent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/overlay_widget.py:77:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1134:function:probe_xp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1166:function:probe_yp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1198:function:probe_xm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1230:function:probe_ym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1260:function:probe_outside_xpyp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1317:function:probe_outside_xpym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:133:function:CALL_MDI_LIST",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1372:function:probe_outside_xmyp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1429:function:probe_outside_xmym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:146:function:CALL_MDI_WAIT",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1490:function:probe_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1532:function:probe_outside_length_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1590:function:probe_outside_length_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1650:function:probe_inside_length_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1702:function:probe_inside_length_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1754:function:probe_round_boss",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:175:function:goto_toolsetter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1762:function:probe_round_pocket",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1772:function:probe_rectangular_boss",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1789:function:probe_rectangular_pocket",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1806:function:probe_ridge_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1814:function:probe_ridge_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1822:function:probe_valley_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1830:function:probe_valley_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1838:function:probe_cal_round_pocket",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1853:function:probe_cal_square_pocket",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1868:function:probe_cal_round_boss",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1881:function:probe_cal_square_boss",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1896:function:get_new_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1918:function:probe_angle_front",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1936:function:probe_angle_back",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1954:function:probe_angle_left",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:1972:function:probe_angle_right",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:200:function:wait",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:206:function:probe_tool_z",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:209:function:probe_tool_with_toolsetter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:20:class:ProbeRoutines",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:21:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:266:function:probe_ts_z",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:28:function:set_timeout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:301:function:probe_tool_z_diam",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:31:function:z_clearance_up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:38:function:z_clearance_down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:45:function:length_x",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:471:function:probe_material_z",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:507:function:probe_angle_yp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:52:function:length_y",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:551:function:probe_angle_ym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:589:function:probe_angle_xp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:59:function:set_zero",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:632:function:probe_angle_xm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:677:function:probe_xy_hole",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:71:function:rotate_coord_system",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:791:function:probe_inside_xpyp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:841:function:probe_inside_xpym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:88:function:add_history",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:891:function:probe_inside_xmyp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:942:function:probe_inside_xmym",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:98:function:probe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_routines.py:995:function:probe_outside_xy_boss",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:142:function:process",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:186:function:process_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:204:function:update_data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:225:function:collect_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:244:function:prechecks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:258:function:postreset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:264:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:266:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:30:class:ProbeSubprog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/probe_subprog.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/qtvcp_icons.py:11:class:Icon",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/qtvcp_icons.py:12:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/qtvcp_icons.py:18:function:get_path",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:20:class:RadioAxisSelector",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:21:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:27:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:30:function:btnstate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:41:function:modeChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:44:function:setAxis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:47:function:getAxis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:49:function:resetAxis",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:52:function:setJoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:54:function:getJoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:56:function:resetJoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/radio_axis_selector.py:63:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:19:function:hexuuid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:22:function:splitext",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:25:class:TextEdit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:263:function:block_signals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:267:function:update_format",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:27:function:canInsertFromMimeData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:291:function:dialog_critical",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:297:function:file_open",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:313:function:file_save",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:327:function:file_saveas",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:347:function:file_print",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:34:function:insertFromMimeData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:350:function:update_title",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:353:function:edit_toggle_wrap",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:356:function:update_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:362:class:RichTextEditorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:363:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:377:function:showDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:389:function:p",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:68:class:MainWindow",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/richtext_selector.py:70:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:10:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:111:function:draw_digits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:130:function:draw_center",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:144:function:draw_setpoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:154:function:draw_needle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:165:function:draw_readout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:181:function:update_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:186:function:set_setpoint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:199:function:set_threshold",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:208:function:get_threshold",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:211:function:reset_threshold",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:215:function:set_max_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:218:function:get_max_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:221:function:reset_max_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:225:function:set_max_reading",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:229:function:get_max_reading",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:232:function:reset_max_reading",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:236:function:set_num_ticks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:242:function:get_num_ticks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:245:function:reset_num_ticks",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:249:function:set_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:253:function:get_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:256:function:reset_label",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:260:function:set_zone1_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:264:function:get_zone1_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:267:function:reset_zone1_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:271:function:set_zone2_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:275:function:get_zone2_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:278:function:reset_zone2_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:282:function:set_bezel_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:286:function:get_bezel_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:289:function:reset_bezel_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:292:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:295:function:set_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:298:function:get_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:301:function:reset_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:33:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:40:function:create_unit_array",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:49:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:63:function:draw_background",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:78:function:draw_zones",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:92:function:draw_gauge",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_gauge.py:9:class:Gauge",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:105:function:setFormat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:110:function:resetFormat",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:114:function:setDecimals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:119:function:setDonutThicknessRatio",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:123:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:159:function:drawBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:162:function:drawBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:177:function:drawValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:204:function:calculateInnerRect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:215:function:drawInnerBackground",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:226:function:drawText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:22:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:242:function:valueToText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:260:function:valueFormatChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:274:function:rebuildDataBrushIfNeeded",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:40:function:setRange",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:56:function:setMinimum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:59:function:setMaximum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:62:function:sizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:67:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:77:function:setNullPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:7:class:RoundProgressBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:84:function:setBarStyle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:89:function:setOutlinePenWidth",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:94:function:setDataPenWidth",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/round_progress.py:99:function:setDataColors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:38:class:RunFromLineDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:48:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:49:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:58:function:accept",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:71:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/runFromLine_dialog.py:73:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1001:function:reset_macroTabDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1004:function:get_macroTabDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1006:function:set_macroTabDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1010:function:set_camViewDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1012:function:get_camViewDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1014:function:reset_camViewDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1017:function:get_camViewDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1019:function:set_camViewDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1023:function:set_toolOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1025:function:get_toolOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1027:function:reset_toolOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1030:function:get_toolOffsetDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1032:function:set_toolOffsetDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1036:function:set_originOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1038:function:get_originOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1040:function:reset_originOffsetDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1043:function:get_originOffsetDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1045:function:set_originOffsetDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1049:function:set_calculatorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1051:function:get_calculatorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1053:function:reset_calculatorDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1056:function:get_calculatorDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1058:function:set_calculatorDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1062:function:set_machineLogDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1064:function:get_machineLogDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1066:function:reset_machineLogDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1069:function:get_machineLogDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1071:function:set_machineLogDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1075:function:set_runFromLineDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1077:function:get_runFromLineDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1079:function:reset_runFromLineDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1082:function:get_runFromLineDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1084:function:set_runFromLineDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1088:function:getHalCompName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1090:function:setHalCompName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1092:function:resetHalCompName",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1100:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:1102:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:152:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:295:function:_pref_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:314:function:_VCPObject_injection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:318:function:on_periodic",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:328:function:process_error",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:374:function:closeEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:440:function:_tool_file_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:450:function:add_xembed_tabs",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:492:function:_embed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:516:function:init_about_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:527:function:showAboutDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:531:function:init_tool_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:541:function:init_message_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:549:function:init_close_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:557:function:init_entry_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:566:function:init_file_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:574:function:init_focus_overlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:581:function:init_focus_effect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:585:function:init_keyboard_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:593:function:init_versaprobe_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:59:function:import_ZMQ",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:602:function:init_macrotab_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:610:function:init_camview_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:618:function:init_tooloffset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:626:function:init_originoffset_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:635:function:init_calculator_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:643:function:init_machinelog_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:651:function:init_runfromline_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:659:function:init_zmg_subscribe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:674:function:on_read_msg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:700:function:init_zmq_publish",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:709:function:zmq_write_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:722:function:_override_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:728:function:effect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:742:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:754:function:set_notify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:756:function:get_notify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:758:function:reset_notify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:75:class:ScreenOptions",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:761:function:set_max_messages",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:763:function:get_max_messages",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:765:function:reset_max_messages",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:768:function:set_close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:76:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:770:function:get_close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:772:function:reset_close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:775:function:set_errors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:777:function:get_errors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:779:function:reset_errors",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:782:function:set_play_sounds",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:784:function:get_play_sounds",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:786:function:reset_play_sounds",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:789:function:set_use_pref_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:791:function:get_use_pref_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:793:function:reset_use_pref_file",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:796:function:set_pref_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:798:function:get_pref_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:800:function:reset_pref_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:803:function:getColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:805:function:setColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:807:function:resetColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:810:function:set_send_zmg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:812:function:get_send_zmg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:815:function:set_receive_zmg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:817:function:get_receive_zmg",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:837:function:set_embed_prgm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:839:function:get_embed_prgm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:841:function:reset_embed_prgm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:844:function:set_default_tab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:846:function:get_default_tab",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:852:function:set_focusOverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:854:function:get_focusOverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:856:function:reset_focusOverlay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:860:function:set_focusEffect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:862:function:get_focusEffect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:864:function:reset_focusEffect",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:868:function:set_focusBlur",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:872:function:get_focusBlur",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:874:function:reset_focusBlur",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:878:function:set_focusTint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:882:function:get_focusTint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:884:function:reset_focusTint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:890:function:set_messageDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:892:function:get_messageDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:894:function:reset_messageDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:897:function:get_messageDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:899:function:set_messageDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:903:function:set_closeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:905:function:get_closeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:907:function:reset_closeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:911:function:set_entryDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:913:function:get_entryDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:915:function:reset_entryDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:918:function:set_entryDialogSoftkey",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:920:function:get_entryDialogSoftkey",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:922:function:reset_entryDialogSoftkey",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:925:function:get_entryDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:927:function:set_entryDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:931:function:set_toolDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:933:function:get_toolDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:935:function:reset_toolDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:938:function:get_toolDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:940:function:set_toolDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:943:function:setUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:945:function:getUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:947:function:resetUseDesktopNotify",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:950:function:setFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:952:function:getFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:954:function:resetFrameless",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:958:function:set_fileDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:960:function:get_fileDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:962:function:reset_fileDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:965:function:get_fileDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:967:function:set_fileDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:971:function:set_keyboardDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:973:function:get_keyboardDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:975:function:reset_keyboardDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:978:function:get_keyboardDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:980:function:set_keyboardDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:984:function:set_versaProbeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:986:function:get_versaProbeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:988:function:reset_versaProbeDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:991:function:get_versaProbeDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:993:function:set_versaProbeDialogColor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:997:function:set_macroTabDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/screen_options.py:999:function:get_macroTabDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1001:function:set_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1005:function:get_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1007:function:reset_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:100:function:reset_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1011:function:set_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1015:function:get_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1017:function:reset_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1021:function:set_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1025:function:get_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1027:function:reset_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1031:function:set_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1035:function:get_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1037:function:reset_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:103:function:set_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1041:function:set_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1045:function:get_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1047:function:reset_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1051:function:set_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1055:function:get_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1057:function:reset_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1061:function:set_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1065:function:get_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1067:function:reset_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1071:function:set_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1075:function:get_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1077:function:reset_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:107:function:get_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1081:function:set_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1085:function:get_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1087:function:reset_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1091:function:set_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1095:function:get_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1097:function:reset_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:109:function:reset_s32_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1101:function:set_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1105:function:get_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1107:function:reset_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1111:function:set_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1115:function:get_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1117:function:reset_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1123:function:set_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1125:function:get_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1127:function:reset_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:112:function:set_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1156:function:setisManual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1158:function:getisManual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1162:function:setisMDI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1164:function:getisMDI",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1168:function:setisAuto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:116:function:get_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1170:function:getisAuto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1174:function:setisEstop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1176:function:getisEstop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1180:function:setisStateOn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1182:function:getisStateOn",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1186:function:setisHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1188:function:getisHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:118:function:reset_float_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1192:function:setisAllHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1194:function:getisAllHomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1199:function:setisAllHomedSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1201:function:getisAllHomedSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1205:function:setisOnSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1207:function:getisOnSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1211:function:setisIdleSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1213:function:getisIdleSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1217:function:setisRunSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1219:function:getisRunSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:121:function:set_floatTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1223:function:setisAutoPauseSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1225:function:getisAutoPauseSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1229:function:setisManSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1231:function:getisManSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1235:function:setisMDISensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1237:function:getisMDISensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:123:function:get_floatTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1241:function:setisAutoSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1243:function:getisAutoSensitive",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1248:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1250:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1254:class:PushButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1255:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:125:function:reset_floatTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1262:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1273:function:connectSignals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1275:function:_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1285:class:ScaledLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1290:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1295:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1301:function:textSample",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1309:function:setMinSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1315:function:setMaxSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1321:function:resizeEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1367:function:setStyleFontSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1370:function:set_scaleText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1372:function:get_scaleText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1374:function:reset_scaleText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1377:function:set_testSample",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1379:function:get_testSample",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:1381:function:reset_testSample",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:139:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:141:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:144:class:CheckBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:145:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:149:class:RadioButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:150:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:154:class:Slider",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:155:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:158:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:170:function:updateValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:175:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:177:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:179:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:183:class:Dial",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:184:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:193:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:207:function:updateScale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:211:function:updateCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:235:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:237:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:239:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:243:class:DoubleScale",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:247:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:255:function:setInput",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:261:function:_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:266:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:268:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:270:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:274:class:GridLayout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:275:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:279:class:RichButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:280:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:289:function:setText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:292:function:text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:298:function:event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:310:function:set_richText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:312:function:get_richText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:314:function:reset_richText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:319:class:IndicatedPushButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:320:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:36:class:LCDNumber",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:390:function:setText",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:404:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:44:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:450:function:enable_logic_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:476:function:disconnectSignals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:487:function:connectSignals",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:488:function:_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:508:function:_init_state_change",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:509:function:only_false",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:549:function:_flip_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:556:function:_j_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:560:function:_j_unhomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:564:function:_check_override_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:571:function:_mode_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:589:function:_spindle_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:59:function:updateDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:600:function:_style_polish",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:609:function:python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:62:function:updateFloatDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:635:function:toggle_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:641:function:indicator_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:647:function:paintEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:653:function:paintIndicator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:735:function:set_indicator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:738:function:get_indicator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:740:function:reset_indicator",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:743:function:set_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:746:function:get_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:748:function:reset_shape",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:751:function:set_HAL_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:755:function:get_HAL_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:757:function:reset_HAL_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:760:function:set_ind_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:764:function:get_ind_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:766:function:reset_ind_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:769:function:set_state_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:773:function:get_state_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:775:function:reset_state_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:778:function:set_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:780:function:get_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:782:function:reset_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:785:function:get_on_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:787:function:set_on_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:790:function:get_off_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:792:function:set_off_color",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:796:function:set_indicator_size",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:799:function:get_indicator_size",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:801:function:reset_indicator_size",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:805:function:set_circle_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:808:function:get_circle_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:80:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:810:function:reset_circle_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:814:function:set_corner_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:817:function:get_corner_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:819:function:reset_corner_radius",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:823:function:set_h_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:826:function:get_h_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:828:function:reset_h_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:832:function:set_w_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:835:function:get_w_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:837:function:reset_w_fraction",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:841:function:set_right_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:844:function:get_right_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:846:function:reset_right_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:850:function:set_top_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:853:function:get_top_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:855:function:reset_top_edge_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:859:function:set_true_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:864:function:get_true_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:866:function:reset_true_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:869:function:set_false_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:874:function:get_false_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:876:function:reset_false_string",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:879:function:set_true_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:87:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:881:function:get_true_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:883:function:reset_true_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:886:function:set_false_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:888:function:get_false_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:890:function:reset_false_python_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:893:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:895:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:897:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:89:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:91:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:929:function:_toggle_status_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:943:function:set_invert_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:945:function:get_invert_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:947:function:reset_invert_status",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:94:function:set_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:951:function:set_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:955:function:get_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:957:function:reset_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:961:function:set_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:965:function:get_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:967:function:reset_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:971:function:set_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:975:function:get_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:977:function:reset_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:981:function:set_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:985:function:get_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:987:function:reset_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:98:function:get_bit_pin_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:991:function:set_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:995:function:get_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/simple_widgets.py:997:function:reset_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:102:function:get_false_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:104:function:reset_false_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:108:function:set_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:112:function:get_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:114:function:reset_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:118:function:set_metric_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:122:function:get_metric_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:124:function:reset_metric_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:128:function:set_css_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:132:function:get_css_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:134:function:reset_css_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:138:function:set_fpr_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:142:function:get_fpr_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:144:function:reset_fpr_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:148:function:set_diameter_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:152:function:get_diameter_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:154:function:reset_diameter_mode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:172:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:174:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:35:class:StateLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:47:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:48:function:_f",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:61:function:_set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:75:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:84:function:set_true_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:91:function:get_true_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:93:function:reset_true_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_label.py:96:function:set_false_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:132:function:_flip_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:137:function:change_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:142:function:joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:146:function:joints_unhomed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:150:function:check_override_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:157:function:mode_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:167:function:spindle_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:177:function:spindle_off",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:184:function:spindle_requested_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:189:function:spindle_override_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:192:function:spindle_actual_changed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:204:function:spindle_near_check",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:214:function:switch_on_hard_limits",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:232:function:_set_halpin_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:247:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:266:function:set_invert_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:268:function:get_invert_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:270:function:reset_invert_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:274:function:set_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:278:function:get_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:280:function:reset_is_paused",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:284:function:set_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:288:function:get_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:290:function:reset_is_estopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:294:function:set_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:298:function:get_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:300:function:reset_is_on",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:304:function:set_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:308:function:get_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:310:function:reset_is_idle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:314:function:set_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:318:function:get_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:320:function:reset_is_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:324:function:set_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:328:function:get_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:330:function:reset_is_flood",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:334:function:set_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:338:function:get_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:340:function:reset_is_mist",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:344:function:set_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:348:function:get_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:34:class:StateLED",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:350:function:reset_is_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:354:function:set_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:358:function:get_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:360:function:reset_is_optional_stop",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:364:function:set_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:368:function:get_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:370:function:reset_is_joint_homed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:374:function:set_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:378:function:get_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:380:function:reset_is_limits_overridden",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:384:function:set_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:388:function:get_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:390:function:reset_is_manual",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:394:function:set_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:398:function:get_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:400:function:reset_is_mdi",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:404:function:set_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:408:function:get_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:40:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:410:function:reset_is_auto",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:414:function:set_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:418:function:get_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:420:function:reset_is_spindle_stopped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:424:function:set_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:428:function:get_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:430:function:reset_is_spindle_fwd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:434:function:set_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:438:function:get_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:440:function:reset_is_spindle_rev",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:444:function:set_is_spindle_at_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:448:function:get_is_spindle_at_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:450:function:reset_is_spindle_at_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:454:function:set_neg_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:458:function:get_neg_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:460:function:reset_neg_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:464:function:set_pos_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:468:function:get_pos_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:470:function:reset_pos_limit_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:474:function:set_limits_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:478:function:get_limits_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:480:function:reset_limits_tripped",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:483:function:set_follow_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:487:function:get_follow_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:489:function:reset_follow_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:495:function:set_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:497:function:get_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:499:function:reset_joint_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:502:function:set_spindle_near_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:506:function:get_spindle_near_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:508:function:reset_spindle_near_percent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:511:function:set_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:513:function:get_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:515:function:reset_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:551:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:553:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:75:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/state_led.py:76:function:only_false",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:164:function:_set_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:167:function:_set_alt_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:171:function:_set_blend_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:176:function:_set_fcode_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:179:function:_set_feedrate_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:187:function:_set_feedunit_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:200:function:_set_actual_rpm",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:203:function:_set_user_system_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:207:function:_set_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:211:function:_switch_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:214:function:_switch_jog_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:218:function:_switch_tool_diam_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:226:function:_switch_tool_offsets_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:234:function:_switch_max_velocity_units",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:238:function:_tool_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:267:function:_tool_file_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:276:function:_set_tool_offset_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:284:function:_ss_tool_diam",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:290:function:_set_work_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:293:function:_ss_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:296:function:_set_surface_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:306:function:conversion",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:312:function:_file_loaded",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:317:function:_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:320:function:_set_timestamp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:323:function:_set_jograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:330:function:_set_max_velocity",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:337:function:_set_halpin_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:347:function:_set_motion_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:358:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:36:class:StatusLabel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:372:function:set_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:389:function:get_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:391:function:reset_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:394:function:set_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:406:function:get_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:408:function:reset_alt_textTemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:412:function:set_index",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:415:function:get_index",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:417:function:reset_index",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:422:function:set_feed_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:426:function:get_feed_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:428:function:reset_feed_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:432:function:set_rapid_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:436:function:get_rapid_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:438:function:reset_rapid_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:442:function:set_max_velocity_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:446:function:get_max_velocity_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:448:function:reset_max_velocity_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:452:function:set_spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:456:function:get_spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:458:function:reset_spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:462:function:set_jograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:466:function:get_jograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:468:function:reset_jograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:472:function:set_jograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:476:function:get_jograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:478:function:reset_jograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:482:function:set_jogincr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:486:function:get_jogincr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:488:function:reset_jogincr",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:492:function:set_jogincr_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:496:function:get_jogincr_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:498:function:reset_jogincr_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:502:function:set_tool_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:506:function:get_tool_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:508:function:reset_tool_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:512:function:set_current_feedrate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:516:function:get_current_feedrate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:518:function:reset_current_feedrate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:522:function:set_current_feedunit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:526:function:get_current_feedunit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:528:function:reset_current_feedunit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:532:function:set_requested_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:536:function:get_requested_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:538:function:reset_requested_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:542:function:set_actual_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:546:function:get_actual_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:548:function:reset_actual_spindle_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:552:function:set_user_system",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:556:function:get_user_system",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:558:function:reset_user_system",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:562:function:set_fcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:566:function:get_fcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:568:function:reset_fcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:572:function:set_blendcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:576:function:get_blendcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:578:function:reset_blendcode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:582:function:set_gcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:586:function:get_gcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:588:function:reset_gcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:592:function:set_mcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:596:function:get_mcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:598:function:reset_mcodes",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:602:function:set_tool_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:606:function:get_tool_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:608:function:reset_tool_diameter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:612:function:set_tool_comment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:616:function:get_tool_comment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:618:function:reset_tool_comment",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:622:function:set_actual_surface_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:626:function:get_actual_surface_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:628:function:reset_actual_surface_speed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:632:function:set_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:636:function:get_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:638:function:reset_filename",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:642:function:set_filepath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:646:function:get_filepath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:648:function:reset_filepath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:652:function:set_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:656:function:get_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:658:function:reset_machine_state",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:662:function:set_motion_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:666:function:get_motion_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:668:function:reset_motion_type",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:672:function:set_time_stamp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:676:function:get_time_stamp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:678:function:reset_time_stamp",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:682:function:set_tool_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:686:function:get_tool_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:688:function:reset_tool_offset",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:691:function:set_state_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:693:function:get_state_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:695:function:reset_state_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:698:function:set_motion_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:700:function:get_motion_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:702:function:reset_motion_label_l",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:706:function:set_gcode_selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:710:function:get_gcode_selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:712:function:reset_gcode_selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:716:function:set_halpin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:720:function:get_halpin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:722:function:reset_halpin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:725:function:set_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:727:function:get_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:729:function:reset_halpin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:779:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:781:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:81:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_label.py:83:function:_f",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:132:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:137:function:_action",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:157:function:get_alert_cmd",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:167:function:_style_polish",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:181:function:_toggle_properties",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:189:function:setrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:193:function:getrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:195:function:resetrapid",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:198:function:setfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:202:function:getfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:204:function:resetfeed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:207:function:setspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:211:function:getspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:213:function:resetspindle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:216:function:setjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:220:function:getjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:222:function:resetjograte",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:225:function:setjograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:229:function:getjograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:231:function:resetjograte_angular",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:234:function:setmax_velocity",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:238:function:getmax_velocity",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:240:function:resetmax_velocity",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:243:function:set_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:245:function:get_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:247:function:reset_halpin_option",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:250:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:252:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:254:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:266:function:setAlertState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:268:function:getAlertState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:271:function:setAlertUnder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:273:function:getAlertUnder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:275:function:resetAlertUnder",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:278:function:setAlertOver",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:280:function:getAlertOver",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:282:function:resetAlertOver",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:293:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:295:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:41:class:DoubleSlider",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:53:function:emitDoubleValueChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:57:function:value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:60:function:setMinimum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:63:function:setMaximum",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:66:function:setSingleStep",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:69:function:singleStep",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:72:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:75:class:StatusSlider",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:76:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_slider.py:92:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_stacked.py:34:class:StatusStacked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_stacked.py:35:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_stacked.py:41:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/status_stacked.py:42:function:_switch",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:131:function:selectionChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:138:function:on_styleTextView_textChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:142:function:on_applyButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:158:function:on_openButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:199:function:on_saveButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:231:function:on_closeButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:235:function:on_clearButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:239:function:on_copyButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:243:function:on_colorButton_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:250:function:loadStyleSheet",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:272:function:saveStyleSheet",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:59:class:StyleSheetEditor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:60:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:78:function:load_dialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/stylesheeteditor.py:95:function:setPath",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:100:function:_set_user_system_text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:105:function:ChangeState",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:116:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:118:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:122:function:main",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:39:class:SystemToolButton",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:40:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:57:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:60:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:73:function:G54",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:76:function:G55",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:79:function:G56",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:82:function:G57",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:85:function:G58",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:88:function:G59",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:91:function:G59_1",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:94:function:G59_2",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/system_tool_button.py:97:function:G59_3",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:19:class:TabWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:20:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:26:function:set_tabSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:28:function:get_tabSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:30:function:reset_tabSize",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:35:class:TabBar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tab_widget.py:40:function:tabSizeHint",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:110:function:currentTool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:113:function:metricMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:117:function:diameterMode",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:121:function:createAllView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:159:function:showSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:174:function:callTextDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:184:function:callDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:195:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:209:function:dataChanged",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:233:function:add_tool",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:238:function:delete_tools",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:245:function:get_checked_list",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:248:function:set_all_unchecked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:253:function:highlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:258:function:selected",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:264:function:scroll",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:273:function:up",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:284:function:down",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:293:function:toggleCurrent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:303:function:set_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:305:function:get_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:307:function:reset_dialog_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:311:function:set_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:313:function:get_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:315:function:reset_keyboard_code",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:319:function:setmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:321:function:getmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:323:function:resetmetrictemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:327:function:setimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:329:function:getimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:331:function:resetimperialtexttemplate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:335:function:getColorHighlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:337:function:setColorHighlight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:342:function:getColorSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:344:function:setColorSelection",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:352:class:MyTableModel",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:353:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:377:function:metricDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:381:function:diameterDisplay",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:386:function:listCheckedTools",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:393:function:uncheckAllTools",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:398:function:toggle",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:407:function:update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:423:function:rowCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:429:function:columnCount",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:435:function:data",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:505:function:flags",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:50:class:ItemEditorFactory",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:518:function:setData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:51:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:54:function:createEditor",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:566:function:headerData",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:574:function:sort",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:69:class:ToolOffsetView",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:70:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/tool_offsetview.py:88:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:115:function:text",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:118:function:value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:121:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:126:function:callDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:129:class:TouchDoubleSpinBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:130:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:133:function:init_settings",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:13:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:140:function:updateValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:141:function:convert",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:143:function:indexof",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:173:function:replace_at_index",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:176:function:getPosition",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:17:function:mousePressEvent",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:191:function:moveLeft",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:20:class:TouchSpinBox",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:219:function:moveRight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:21:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:247:function:moveLeft",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:258:function:setValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:261:function:entryUpdate",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:67:function:init_settings",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:72:function:updateValue",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:83:function:moveLeft",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:99:function:moveRight",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/touchEntry.py:9:class:LineEdit",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:109:function:eventFilter",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:118:function:_tool_info",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:127:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:128:function:homed_on_test",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:225:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:248:function:return_value",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:257:function:popEntry",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:268:function:buildToolTip",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:277:function:start_process",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:286:function:start_probe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:296:function:process_started",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:299:function:read_stdout",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:304:function:read_stderror",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:309:function:process_finished",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:314:function:parse_input",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:345:function:help_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:348:function:probe_btn_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:355:function:pbtn_set_x_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:358:function:pbtn_set_y_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:361:function:pbtn_set_z_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:364:function:pbtn_set_angle_released",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:377:function:input_next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:386:function:update_search_vel_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:391:function:update_probe_vel_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:396:function:update_probe_height_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:401:function:update_block_height_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:410:function:update_latch_return_dist_pin",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:422:function:set_statusbar",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:430:function:get_parms",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:441:function:check_probe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:447:function:show_results",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:459:function:pop_help",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:465:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:467:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:470:class:HelpDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:471:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:484:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:489:function:buildWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:49:class:VersaProbe",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:50:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:527:function:next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:553:function:close",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/versa_probe.py:557:function:showDialog",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:102:function:init_numbers",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:111:function:init_special",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:122:function:letter_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:128:function:special_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:136:function:button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:13:class:VirtualKeyboard",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:14:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:153:function:caps_lock_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:161:function:function_clicked",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:171:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:174:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/virtualkeyboard.py:97:function:init_letters",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/web_widget.py:27:class:WebWidget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/web_widget.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/web_widget.py:39:function:loadFile",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:101:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:103:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:106:class:_HalToggleBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:107:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:116:function:_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:120:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:122:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:124:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:128:class:_HalScaleBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:129:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:142:function:_pin_update",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:146:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:148:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:150:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:155:class:_HalSensitiveBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:156:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:164:function:set_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:166:function:get_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:168:function:reset_pin_name",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:35:class:_HalWidgetBase_",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:36:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:53:function:hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:72:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:76:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:80:function:_designer_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:84:function:get_full_pinname",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:93:class:_HalWidgetBase",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_baseclass.py:96:function:__new__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:105:function:show_named_widget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:124:function:show_default",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:139:function:show_next",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:146:function:get_current_object",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:149:function:get_current_number",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:156:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:158:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:34:class:WidgetSwitcher",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:37:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:45:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:61:function:register_widget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:67:function:search",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/widget_switcher.py:78:function:show_id_widget",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:101:function:_hal_cleanup",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:107:class:XEmbed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:108:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:112:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:124:function:send_x11_message",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:127:function:set_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:129:function:get_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:131:function:reset_command",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:24:class:XEmbeddable",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:25:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:28:function:_hal_init",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:31:function:embed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:42:function:let_program_embed",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:54:function:embed_program",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:69:function:event",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:85:function:launch",
|
|
"src:symbol:linuxcnc/lib/python/qtvcp/widgets/xembed.py:93:function:launch_xid",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:10:class:ProgrammerException",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:118:function:data",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:136:function:start",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:148:function:stop",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:14:class:FaultCodes",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:27:class:RasterProgrammer",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:46:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:65:function:__del__",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:68:function:exit",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:72:function:__waitEnabled",
|
|
"src:symbol:linuxcnc/lib/python/raster.py:83:function:begin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:100:function:alloccoloroverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:104:function:freecoloroverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:109:class:RawOpengl",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:114:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:121:function:tkRedraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:140:function:tkMap",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:144:function:tkExpose",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:150:class:Opengl",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:160:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:206:function:help",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:220:function:deactivate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:223:function:activate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:229:function:tkHandlePick",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:251:function:tkRecordMouse",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:256:function:tkStartRotate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:261:function:tkScale",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:264:function:do_AutoSpin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:275:function:tkAutoSpin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:27:class:Togl",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:298:function:tkRotate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:302:function:tkTranslate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:305:function:tkTranslateOrRotate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:308:function:tkRotateOrTranslate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:313:function:_redraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:316:function:tkRedraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:358:function:tkMap",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:364:function:tkExpose",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:377:function:tkPrint",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:382:function:zoomwheel",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:386:function:tkStartZoom",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:389:function:tkContinueZoom",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:392:function:tkZoomin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:395:function:tkZoomout",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:44:function:render",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:48:function:swapbuffers",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:52:function:makecurrent",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:56:function:alloccolor",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:60:function:freecolor",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:64:function:setcolor",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:68:function:loadbitmapfont",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:72:function:unloadbitmapfont",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:76:function:uselayer",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:80:function:showoverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:84:function:hideoverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:88:function:existsoverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:92:function:getoverlaytransparentvalue",
|
|
"src:symbol:linuxcnc/lib/python/rs274/OpenGLTk.py:96:function:ismappedoverlay",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:102:function:arc_rad",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:114:function:get_pts",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:120:function:one_quadrant",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:126:function:sign",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:154:function:arc_dir",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:171:function:arc_fmt",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:177:function:douglas",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:20:function:dist_lseg",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:270:class:Gcode",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:272:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:287:function:set_plane",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:293:function:begin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:305:function:flush",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:328:function:end",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:334:function:exactpath",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:340:function:continuous",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:347:function:rapid",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:352:function:move_common",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:380:function:set_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:385:function:cut",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:396:function:home",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:401:function:safety",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:40:function:rad1",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:55:class:Point",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:56:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:59:function:__str__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:60:function:__sub__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:62:function:__add__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:64:function:__mul__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:67:function:cross",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:69:function:dot",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:71:function:mag",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:73:function:mag2",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:76:function:cent1",
|
|
"src:symbol:linuxcnc/lib/python/rs274/author.py:93:function:arc_center",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1045:function:draw_grid_permuted",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1090:function:draw_grid",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1109:function:all_joints_homed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1114:function:one_or_more_on_limit",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1119:function:idx_for_home_or_limit_icon",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1175:function:show_icon_init",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1179:function:show_icon",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1191:function:redraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:147:function:comment",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1538:function:cache_tool",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1564:function:lathe_historical_config",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1572:function:jnum_for_aletter",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1583:function:posstrs",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1646:function:joint_dro_format",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1653:function:dro_format",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1720:function:draw_small_origin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1759:function:draw_axes",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:176:function:message",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:178:function:check_abort",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:180:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1830:function:make_cone",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:184:function:draw_lines",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1851:function:lathetool",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:187:function:colored_lines",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1913:function:extents_info",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1922:function:make_selection_list",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1932:function:make_main_list",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1943:function:load_preview",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:1957:function:from_internal_units",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:206:function:draw_dwells",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:209:function:calc_extents",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:239:function:unrotate_preview",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:267:function:tool_offset",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:282:function:set_spindle_rate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:283:function:set_feed_rate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:284:function:select_plane",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:286:function:change_tool",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:293:function:straight_traverse",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:300:function:rigid_tap",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:310:function:arc_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:319:function:straight_arcsegments",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:331:function:straight_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:339:function:user_defined_function",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:33:function:minmax",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:344:function:dwell",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:350:function:highlight",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:387:function:color_with_alpha",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:389:function:color",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:392:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:406:function:with_context",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:407:function:inner",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:415:function:with_context_swap",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:416:function:inner",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:426:class:GlCanonDraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:481:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:525:function:set_cone_basesize",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:530:function:init_glcanondraw",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:551:function:realize",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:557:function:set_canon",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:561:function:basic_lighting",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:573:function:select",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:614:function:dlist",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:621:function:stale_dlist",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:626:function:__del__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:630:function:update_highlight_variable",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:633:function:set_current_line",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:634:function:set_highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:662:function:redraw_perspective",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:688:function:redraw_ortho",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:717:function:color_limit",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:725:function:show_extents",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:83:class:GLCanon",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:85:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:936:function:to_internal_linear_unit",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:943:function:to_internal_units",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:951:function:soft_limits",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:952:function:fudge",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:963:function:get_foam_z",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:967:function:get_foam_w",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:971:function:get_grid",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:975:function:comp",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:980:function:param",
|
|
"src:symbol:linuxcnc/lib/python/rs274/glcanon.py:990:function:draw_grid_lines",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:102:function:set_g92_offset",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:105:function:next_line",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:109:function:set_plane",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:112:function:set_feed_rate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:115:function:comment",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:118:function:straight_traverse",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:121:function:straight_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:124:function:dwell",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:130:function:arc_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:137:class:StatMixin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:138:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:143:function:change_tool",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:153:function:get_tool",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:161:function:get_external_angular_units",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:164:function:get_external_length_units",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:167:function:get_axis_mask",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:170:function:get_block_delete",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:19:class:Translated",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:28:function:rotate_and_translate",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:56:function:straight_traverse",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:58:function:straight_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:60:function:set_g5x_offset",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:71:function:set_g92_offset",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:81:function:set_xy_rotation",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:87:class:ArcsToSegmentsMixin",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:91:function:set_plane",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:94:function:arc_feed",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:98:class:PrintCanon",
|
|
"src:symbol:linuxcnc/lib/python/rs274/interpret.py:99:function:set_g5x_offset",
|
|
"src:symbol:linuxcnc/lib/python/rs274/options.py:169:function:install",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:27:class:HAL",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:35:function:write_halfile",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:445:function:connect_joint",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:473:function:sim_hardware_halfile",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:561:function:connect_input",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:601:function:connect_output",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:645:function:min_lim_sig",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:657:function:max_lim_sig",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:670:function:qtplasmac_connections",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:821:function:qtplasmac_prefs",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:822:function:putPrefs",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:849:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_HAL.py:851:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:270:function:write_one_axis",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:272:function:get",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:31:class:INI",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:32:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:362:function:hz",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:373:function:minperiod",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:382:function:maxhz",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:385:function:ideal_maxvel",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:392:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:394:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/build_INI.py:39:function:write_inifile",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1002:function:spindle_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1033:function:spindle_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1045:function:on_usespindleatspeed_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1051:function:finished_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1053:function:finished_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1057:function:__getitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:1059:function:__setitem__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:122:function:set_buttons_sensitive",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:130:function:page_set_state",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:145:function:initialize",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:205:function:intro_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:207:function:intro_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:213:function:start_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:218:function:start_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:255:function:on_machinename_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:258:function:on_drivertype_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:264:function:base_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:287:function:base_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:318:function:on_pp2_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:326:function:on_pp3_checkbutton_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:334:function:on_latency_test_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:337:function:on_calculate_ideal_period",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:340:function:on_units_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:349:function:options_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:38:class:Pages",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:39:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:424:function:options_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:505:function:on_loadladder_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:508:function:on_display_pyvcp_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:511:function:on_classicladder_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:521:function:on_pyvcp_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:529:function:on_halui_toggled",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:52:function:on_window1_destroy",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:532:function:on_combobox_screens_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:551:function:halui_page_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:558:function:halui_page_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:573:function:on_halui_btnAdd_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:577:function:on_halui_btnDel_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:598:function:on_halui_btnUp_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:610:function:on_halui_btnDown_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:622:function:on_halui_row_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:633:function:pport1_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:63:function:on_button_fwd_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:657:function:pport1_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:686:function:on_exclusive_check_pp1",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:689:function:on_preselect_button_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:701:function:on_pp1_preset_io_combo_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:714:function:pport2_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:735:function:pport2_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:756:function:on_pp2_direction_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:762:function:on_exclusive_check_pp2",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:768:function:ubuttons_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:773:function:ubuttons_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:781:function:thcad_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:788:function:thcad_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:795:function:on_pp2_preset_io_combo_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:808:function:axisx_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:810:function:axisx_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:813:function:on_xsteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:814:function:on_xmicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:815:function:on_xpulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:816:function:on_xpulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:817:function:on_xleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:818:function:on_xmaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:819:function:on_xmaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:820:function:on_xaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:825:function:axisy_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:827:function:axisy_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:830:function:on_ysteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:831:function:on_ymicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:832:function:on_ypulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:833:function:on_ypulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:834:function:on_yleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:835:function:on_ymaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:836:function:on_ymaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:837:function:on_yaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:842:function:axisz_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:844:function:axisz_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:847:function:on_zsteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:848:function:on_zmicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:849:function:on_zpulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:850:function:on_zpulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:851:function:on_zleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:852:function:on_zmaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:853:function:on_zmaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:854:function:on_zaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:859:function:axisu_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:861:function:axisu_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:864:function:on_usteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:865:function:on_umicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:866:function:on_upulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:867:function:on_upulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:868:function:on_uleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:869:function:on_umaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:870:function:on_umaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:871:function:on_uaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:876:function:axisv_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:878:function:axisv_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:881:function:on_vsteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:882:function:on_vmicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:883:function:on_vpulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:884:function:on_vpulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:885:function:on_vleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:886:function:on_vmaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:887:function:on_vmaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:888:function:on_vaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:893:function:axisa_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:895:function:axisa_finish",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:898:function:on_asteprev_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:899:function:on_amicrostep_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:900:function:on_apulleyden_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:901:function:on_apulleynum_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:902:function:on_aleadscrew_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:903:function:on_amaxvel_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:904:function:on_amaxacc_changed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:905:function:on_aaxistest_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:911:function:on_jogminus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:915:function:on_jogminus_released",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:919:function:on_jogplus_pressed",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:922:function:on_jogplus_released",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:926:function:update_axis_params",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:929:function:axis_prepare",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:930:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:934:function:set_active",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:97:function:on_button_back_clicked",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:982:function:axis_done",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:983:function:get_text",
|
|
"src:symbol:linuxcnc/lib/python/stepconf/pages.py:984:function:get_active",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:101:function:do_cmd",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:120:function:startup_ack",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:129:function:tooldb_callbacks",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:137:function:tooldb_tools",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:142:function:tooldb_loop",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:20:function:do_reply",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:24:function:saveline",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:28:function:currentline",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:32:function:nak_reply",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:38:function:tool_cmd",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:57:function:get_cmd",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:70:function:put_cmds",
|
|
"src:symbol:linuxcnc/lib/python/tooldb.py:97:function:unknown_cmd",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:107:function:jogging",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:111:function:override_limits",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:116:function:spindle_forward",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:121:function:spindle_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:126:function:spindle_reverse",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:131:function:spindle_faster",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:136:function:spindle_slower",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:141:function:set_motion_mode",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:147:function:continuous_jog_velocity",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:155:function:continuous_jog",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:166:function:quill_up",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:173:function:feed_override",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:177:function:spindle_override",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:17:class:emc_control",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:181:function:max_velocity",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:185:function:reload_tooltable",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:189:function:opstop_on",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:18:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:193:function:opstop_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:197:function:blockdel_on",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:201:function:blockdel_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:205:function:abort",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:209:function:single_block",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:219:function:cycle_start",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:237:class:emc_status",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:238:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:270:function:dro_inch",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:273:function:dro_mm",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:276:function:set_machine_units",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:280:function:convert_units",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:283:function:dro_commanded",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:286:function:dro_actual",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:289:function:get_current_tool",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:293:function:get_current_system",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:303:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:35:function:mask",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:39:function:mdi_active",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:42:function:unmask",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:45:function:mist_on",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:49:function:mist_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:53:function:flood_on",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:57:function:flood_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:61:function:estop",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:65:function:estop_reset",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:69:function:machine_off",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:73:function:machine_on",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:77:function:home_all",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:84:function:unhome_all",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:91:function:home_selected",
|
|
"src:symbol:linuxcnc/lib/python/touchy/emc_interface.py:99:function:unhome_selected",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:18:class:filechooser",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:19:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:31:function:populate",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:45:function:select",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:57:function:select_and_show",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:78:function:up",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:84:function:down",
|
|
"src:symbol:linuxcnc/lib/python/touchy/filechooser.py:88:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:109:function:jogincrement",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:112:function:jogactive",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:115:function:periodic",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:17:class:hal_interface",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:18:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:92:function:wheel",
|
|
"src:symbol:linuxcnc/lib/python/touchy/hal_interface.py:98:function:jogaxis",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:106:function:on_select",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:109:function:clear_startline",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:113:function:get_startline",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:16:class:listing",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:17:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:31:function:populate",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:47:function:show_line",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:54:function:highlight_line",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:60:function:up",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:66:function:down",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:70:function:readfile",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:80:function:reload",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:83:function:previous",
|
|
"src:symbol:linuxcnc/lib/python/touchy/listing.py:94:function:next",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:103:function:get_description",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:106:function:get_words",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:123:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:126:function:set_word",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:129:function:set_polar",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:132:function:issue",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:157:class:mdi_control",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:158:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:173:function:not_editing",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:177:function:editing",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:183:function:get_text",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:187:function:set_text",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:200:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:204:function:back",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:209:function:fill_out",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:219:function:next",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:224:function:ok",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:228:function:decimal",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:233:function:minus",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:243:function:keypad",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:248:function:gp",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:251:function:g",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:259:function:m",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:262:function:t",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:265:function:o",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:275:function:select",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:282:function:set_tool",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:300:function:set_origin",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:30:class:mdi",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:31:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/mdi.py:95:function:add_macros",
|
|
"src:symbol:linuxcnc/lib/python/touchy/preferences.py:21:class:preferences",
|
|
"src:symbol:linuxcnc/lib/python/touchy/preferences.py:30:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/touchy/preferences.py:35:function:getpref",
|
|
"src:symbol:linuxcnc/lib/python/touchy/preferences.py:46:function:putpref",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:120:function:paramiterator",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:151:function:updater",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:162:function:create_vcp",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:42:function:read_file",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:68:function:nodeiterator",
|
|
"src:symbol:linuxcnc/lib/python/vcpparse.py:85:function:widget_creator",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:1014:function:main",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:101:class:HalRotate",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:102:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:1052:function:update",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:1062:function:quit",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:108:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:113:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:117:class:Rotate",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:118:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:122:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:127:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:131:class:Track",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:136:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:142:function:angle_to",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:150:function:map_coords",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:159:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:186:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:189:class:CoordsBase",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:190:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:199:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:202:function:_coord",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:208:class:CylinderX",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:209:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:238:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:248:class:CylinderY",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:249:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:253:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:27:class:Collection",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:282:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:28:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:290:class:CylinderZ",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:291:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:316:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:324:class:Sphere",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:325:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:32:function:traverse",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:334:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:343:class:TriangleXY",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:344:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:404:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:419:class:TriangleXZ",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:420:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:424:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:432:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:438:class:TriangleYZ",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:439:function:coords",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:443:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:451:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:457:class:ArcX",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:458:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:45:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:543:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:566:class:Box",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:567:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:56:function:set_volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:59:class:Translate",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:60:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:621:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:630:class:BoxCentered",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:631:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:637:class:BoxCenteredXY",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:638:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:644:class:Capture",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:645:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:648:function:capture",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:64:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:651:function:volume",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:663:function:invert",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:678:class:Hud",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:682:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:689:function:show",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:68:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:694:function:hide",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:697:function:clear",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:700:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:71:class:Scale",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:72:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:76:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:771:class:O",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:772:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:783:function:basic_lighting",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:804:function:redraw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:80:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:83:class:HalTranslate",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:84:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:890:function:plotclear",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:893:class:Color",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:894:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:898:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:902:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:905:class:AsciiSTL",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:906:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:90:function:apply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:937:function:draw",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:954:class:AsciiOBJ",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:955:function:__init__",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:97:function:unapply",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:980:function:parse_int",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:984:function:parse_slash",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:987:function:parse_face",
|
|
"src:symbol:linuxcnc/lib/python/vismach.py:990:function:draw"
|
|
],
|
|
"output_sha256": "39ab6b831f4eb53347dbb509855ca05bc557e25abc5d76837c45ce037a3e44a9",
|
|
"resolved_edges": 35685,
|
|
"schema": "dependency-closure-report.v1",
|
|
"unresolved": [
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/anglejog|12",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/anglejog"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/anglejog/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/anglejog/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/anglejog/anglejog.var|15",
|
|
"raw_value": "anglejog.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/anglejog/anglejog.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/anglejog/LIB:basic_sim.tcl -no_sim_spindle -no_use_hal_manualtoolchange|23",
|
|
"raw_value": "LIB:basic_sim.tcl -no_sim_spindle -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/anglejog/LIB:basic_sim.tcl -no_sim_spindle -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/anglejog/anglejog.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/anglejog/anglejog.tbl|35",
|
|
"raw_value": "anglejog.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/anglejog/anglejog.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|27",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal|38",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|39",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simulated_home.hal|40",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/check_xyz_constraints.hal|41",
|
|
"raw_value": "check_xyz_constraints.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/check_xyz_constraints.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/position.txt|50",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim-9axis.var|23",
|
|
"raw_value": "sim-9axis.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim-9axis.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/locking_indexer.hal|33",
|
|
"raw_value": "locking_indexer.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/locking_indexer.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_9axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/position9.txt|43",
|
|
"raw_value": "position9.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/position9.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim_mm.var|23",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/core_sim.hal|32",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal|33",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|34",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simulated_home.hal|35",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/axis_mm.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/position_mm.txt|45",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/canterp.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/canterp.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/canterp.var|18",
|
|
"raw_value": "canterp.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/canterp.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/canterp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|24",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/classicladder/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/classicladder/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.var|13",
|
|
"raw_value": "demo_sim_cl.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/classicladder/core_sim.hal|20",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/classicladder/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/classicladder/simulated_home.hal|22",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/classicladder/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/db_demo/db_nonran.var|3",
|
|
"raw_value": "db_nonran.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/db_demo/db_nonran.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/db_demo/db_nonran.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/db_demo|4",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/db_demo"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/db_demo/db_ran.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/db_demo/db_ran.var|3",
|
|
"raw_value": "db_ran.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/db_demo/db_ran.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/db_demo/db_ran.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/db_demo|4",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/db_demo"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var|17",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/external_offsets/halscope -i dynamic_offsets.halscope|2",
|
|
"raw_value": "halscope -i dynamic_offsets.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/halscope -i dynamic_offsets.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_sim_spindle|4",
|
|
"raw_value": "LIB:basic_sim.tcl -no_sim_spindle",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_sim_spindle"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim_pin --title \"MPG Simulator\"|1",
|
|
"raw_value": "sim_pin --title \"MPG Simulator\" \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim_pin --title \"MPG Simulator\""
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/external_offsets|20",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_use_hal_manualtoolchange|4",
|
|
"raw_value": "LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var|15",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl|2",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/opa.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/external_offsets|22",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/opa.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/opa.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/external_offsets/sim_pin ini.x.max_acceleration ini.x.max_velocity|2",
|
|
"raw_value": "sim_pin ini.x.max_acceleration ini.x.max_velocity",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/sim_pin ini.x.max_acceleration ini.x.max_velocity"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/external_offsets/opa.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/external_offsets/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl|10",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/extrajoints|15",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var|18",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow|3",
|
|
"raw_value": "halshow --fformat %.6f extrajoints.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\"|4",
|
|
"raw_value": "sim_pin --title \"j4 extrajoint\" \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\""
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/extrajoints|13",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var|16",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow|3",
|
|
"raw_value": "halshow --fformat %.6f extrajoints.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\"|4",
|
|
"raw_value": "sim_pin --title \"j4 extrajoint\" \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\""
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl|10",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/extrajoints|15",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var|18",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow|3",
|
|
"raw_value": "halshow --fformat %.6f extrajoints.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/halshow --fformat %.6f extrajoints.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\"|4",
|
|
"raw_value": "sim_pin --title \"j4 extrajoint\" \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j4 extrajoint\""
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j5 extrajoints\"|5",
|
|
"raw_value": "sim_pin --title \"j5 extrajoints\" \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/extrajoints/sim_pin --title \"j5 extrajoints\""
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/foam/axis_foam.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/foam/axis_foam.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/foam/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/foam/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/foam/axis_foam.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/foam/foam.var|24",
|
|
"raw_value": "foam.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/foam/foam.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/foam/axis_foam.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/foam/LIB:basic_sim.tcl|31",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/foam/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/foam/axis_foam.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/foam/sim.tbl|42",
|
|
"raw_value": "sim.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/foam/sim.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|20",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|21",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|22",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/toolpaths.py|23",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gantry/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/gantrysim.hal|31",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal|32",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal|33",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/gantry/sim.tbl|42",
|
|
"raw_value": "sim.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/gantry/halscope -i gantry_jjog.halscope|1",
|
|
"raw_value": "halscope -i gantry_jjog.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/halscope -i gantry_jjog.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|21",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|22",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py|23",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/axis/gantry/toolpaths.py|24",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gantry/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/gantrysim.hal|32",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal|33",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal|34",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/gantry/sim.tbl|44",
|
|
"raw_value": "sim.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/sim.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gantry/gantry_mm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gantry/gantry_mm.var|22",
|
|
"raw_value": "gantry_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gantry/gantry_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/geometry/xyzc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl|14",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/geometry/xyzc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/geometry/xyzc.var|8",
|
|
"raw_value": "xyzc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/geometry/xyzc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl|14",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/geometry/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/geometry/xyzc.var|8",
|
|
"raw_value": "xyzc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/geometry/xyzc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|26",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|26",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt|39",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|27",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl|34",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/gladevcp|24",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|26",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/probe.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt|39",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|25",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt|38",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/gladevcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/sim.var|14",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/core_sim.hal|21",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/simulated_home.hal|23",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/halui_pyvcp/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/hal-histogram -geometry +50+50|90",
|
|
"raw_value": "hal-histogram -geometry +50+50\\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/hal-histogram -geometry +50+50"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/histogram_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/hal-histogram -geometry +10+10|91",
|
|
"raw_value": "hal-histogram -geometry +10+10\\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/hal-histogram -geometry +10+10"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim-lathe.var|22",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/core_sim.hal|29",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|30",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simulated_home.hal|31",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/historical_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/lathe.hal|32",
|
|
"raw_value": "lathe.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin|93",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ini_hal_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin|93~dup2",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var|24",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal|34",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal|35",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt|44",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var|29",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal|38",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt|47",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var|29",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal|38",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt|47",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var|29",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal|38",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt|47",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var|28",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal|36",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal|37",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt|45",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/iocontrolv2/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.joint/mode=Pulse|1",
|
|
"raw_value": "sim_pin halui.mode.joint/mode=Pulse \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.joint/mode=Pulse"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var|25",
|
|
"raw_value": "xyzb.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.teleop/mode=Pulse|2",
|
|
"raw_value": "sim_pin halui.mode.teleop/mode=Pulse \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin halui.mode.teleop/mode=Pulse"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow|3",
|
|
"raw_value": "halshow xyzb.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl|7",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1|8",
|
|
"raw_value": "LIB:wheeljogpins.tcl 0.1",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin|1",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var|24",
|
|
"raw_value": "xyzb.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow|2",
|
|
"raw_value": "halshow xyzb.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/halshow xyzb.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl|6",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1|7",
|
|
"raw_value": "LIB:wheeljogpins.tcl 0.1",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/LIB:wheeljogpins.tcl 0.1"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow|1",
|
|
"raw_value": "halshow xyzx.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl|3",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:xhc-hb04.tcl|4",
|
|
"raw_value": "LIB:xhc-hb04.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:xhc-hb04.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/sim_pin|1",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow|2",
|
|
"raw_value": "halshow xyzx.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/halshow xyzx.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/laser/laser.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/laser/laser.var|18",
|
|
"raw_value": "laser.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/laser/laser.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/laser/laser.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/laser/LIB:basic_sim.tcl|9",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/laser/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis|20",
|
|
"raw_value": "../",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/lathe-fanucy|20",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe-fanucy"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/sim-lathe.var|22",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/LIB:basic_sim.tcl|29",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe-fanucy/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim-lathe.var|21",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|29",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/sim-lathe.var|24",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/axis_manualtoolchange.hal|33",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/simulated_home.hal|34",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.tbl|49",
|
|
"raw_value": "lathe.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/lathe_multispindle/lathe.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/sim_ldelta.hal|27",
|
|
"raw_value": "sim_ldelta.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_ldelta.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|28",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/sim_ldelta.hal|27",
|
|
"raw_value": "sim_ldelta.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_ldelta.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|28",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin >/dev/null|52",
|
|
"raw_value": "sim_pin >/dev/null \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_pin >/dev/null"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/sim_pin >/dev/null|52~dup2",
|
|
"raw_value": "sim_pin >/dev/null \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_pin >/dev/null"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ldelta_demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/minimal_xyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|11",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/minimal_xyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|6",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|6",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|7",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal|6",
|
|
"raw_value": "LIB:moveoff_external.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|7",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|8",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin|9",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|6",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/3_always_local.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|7",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal|6",
|
|
"raw_value": "LIB:moveoff_external.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|7",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|8",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/4_always_external.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin|9",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halshow ./moveoff.halshow|6",
|
|
"raw_value": "halshow ./moveoff.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halshow ./moveoff.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|7",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin|8",
|
|
"raw_value": "sim_pin \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/sim_pin"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|12",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/6_zretract.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal|6",
|
|
"raw_value": "LIB:moveoff_external.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal|6",
|
|
"raw_value": "LIB:moveoff_external.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|8",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|9",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl|5",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal|6",
|
|
"raw_value": "LIB:moveoff_external.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/LIB:moveoff_external.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui|8",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope|9",
|
|
"raw_value": "halscope -i ./moveoff.halscope",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/moveoff/halscope -i ./moveoff.halscope"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif|30",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var|41",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|42",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|42",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl|51",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif|31",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var|42",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gcmc_lib|43",
|
|
"raw_value": "../../nc_files/gcmc_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gcmc_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|43",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|43",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl|52",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/sim-lathe.var|30",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/lathe|31",
|
|
"raw_value": "../../nc_files/ngcgui_lib/lathe",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|31",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|3",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl|40",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif|20",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var|31",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|32",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|32",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl|41",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif|31",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var|42",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|43",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|43",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|4",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl|52",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl|31",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/position.txt|37",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/acc_test.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/orphans/sim.tbl|41",
|
|
"raw_value": "sim.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/sim.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|21",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/sim_mm.var|22",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/orphans/simulated_home.hal|30",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/axis_noio.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/position_mm.txt|40",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:TOOL:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/orphans/tool.tbl|126",
|
|
"raw_value": "tool.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|16",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/orphans/rack-toolchange/nc_subroutines|25",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/rack-toolchange/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|25",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/sim_mm.var|29",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/position_mm.txt|49",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/iocontrol-removed/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl|31",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/orphans/check_xyz_constraints.hal|32",
|
|
"raw_value": "check_xyz_constraints.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/check_xyz_constraints.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/orphans/position.txt|37",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/orphans/medium.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/orphans/sim.tbl|41",
|
|
"raw_value": "sim.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/orphans/sim.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.gif|17",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|19",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.var|28",
|
|
"raw_value": "linuxcnc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/panelui-demo/linuxcnc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/pentapod/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/pentapod/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/pentapod/pentapod.var|22",
|
|
"raw_value": "pentapod.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/pentapod/pentapod.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/pentapod|23",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/pentapod"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/pentapod/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/pentapod/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/pentapod/pentapod.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/pentapod/position.txt|50",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/pentapod/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal|14",
|
|
"raw_value": "qtplasmac_comp.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|21",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/imperial_mdi_history.txt|26",
|
|
"raw_value": "imperial_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/imperial_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/imperial_position.txt|49",
|
|
"raw_value": "imperial_position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/imperial_position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/imperial_parameters.txt|8",
|
|
"raw_value": "imperial_parameters.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/imperial_parameters.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/plasma|9",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/imperial.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal|14",
|
|
"raw_value": "qtplasmac_comp.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/qtplasmac_comp.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|21",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/metric_mdi_history.txt|26",
|
|
"raw_value": "metric_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/metric_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/metric_position.txt|49",
|
|
"raw_value": "metric_position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/metric_position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/plasma/metric_parameters.txt|8",
|
|
"raw_value": "metric_parameters.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma/metric_parameters.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/plasma|9",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/plasma"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/plasma/metric.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/profile_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/profile_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/profile_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/profile_axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/profile_axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/position.txt|37",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/sim.var|28",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl|35",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/sim.var|28",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl|35",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/qtvcp/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/qtvcp/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/random_tc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/random_tc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/random_tc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/random_tc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/random_tc.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/position.txt|37",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rdelta.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rdelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/sim_rdelta.hal|27",
|
|
"raw_value": "sim_rdelta.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/sim_rdelta.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rdelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal|28",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rdelta.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rdelta.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/cycle/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/cycle/sim-9axis.var|22",
|
|
"raw_value": "sim-9axis.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/sim-9axis.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines|23",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|23",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/cycle/LIB:basic_sim.tcl|34",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/cycle/locking_indexer.hal|35",
|
|
"raw_value": "locking_indexer.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/locking_indexer.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/cycle/cycle.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/cycle/position9.txt|41",
|
|
"raw_value": "position9.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/cycle/position9.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines|27",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|27",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/LIB:basic_sim.tcl|44",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/position.txt|50",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/extend-builtins/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/getting-started/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/getting-started/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/getting-started/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/getting-started/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines|26",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/getting-started/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|26",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/getting-started/LIB:basic_sim.tcl|41",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/getting-started/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/getting-started/demo.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/getting-started/position.txt|46",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/getting-started/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/sim_mm.var|23",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines|24",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|24",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/LIB:basic_sim.tcl|35",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/position_mm.txt|44",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/sim_mm.var|23",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines|24",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|24",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/LIB:basic_sim.tcl|35",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/position_mm.txt|45",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/rack-toolchange/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_subroutines|26",
|
|
"raw_value": "nc_subroutines",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/nc_subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|26",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/LIB:basic_sim.tcl|36",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/remap/stop-lookahead/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/rose_engine/halshow rose_engine.halshow|1",
|
|
"raw_value": "halshow rose_engine.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/rose_engine/halshow rose_engine.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:None|26",
|
|
"raw_value": "/tmp/rose.var",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/rose_engine|27",
|
|
"raw_value": ".",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/rose_engine"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/rose_engine/rose.tbl|33",
|
|
"raw_value": "rose.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/rose_engine/rose.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/rose_engine/LIB:basic_sim.tcl|3",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/rose_engine/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:core_sim.hal|4",
|
|
"raw_value": "LIB:core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:axis_manualtoolchange.hal|5",
|
|
"raw_value": "LIB:axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:simulated_home.hal|6",
|
|
"raw_value": "LIB:simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/simtcl/LIB:simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/spindle_orient/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs|24",
|
|
"raw_value": "../../nc_files/remap_lib/common_nc_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib/common_nc_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/spindle_orient/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/spindle_orient/core_sim.hal|34",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/spindle_orient/axis_manualtoolchange.hal|35",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/spindle_orient/simulated_home.hal|36",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/spindle_orient/orient.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/spindle_orient/position.txt|42",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/spindle_orient/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/twopass/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/twopass/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/twopass/core_sim.hal|33",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/twopass/sim_spindle_encoder.hal|34",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/twopass/axis_manualtoolchange.hal|35",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/twopass/simulated_home.hal|36",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/twopass/twopass.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/twopass/position.txt|44",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/twopass/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|11",
|
|
"raw_value": "/home/rolf/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial_mm.var|21",
|
|
"raw_value": "3axis-tutorial_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/position_mm.txt|39",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/3axis-tutorial/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs|19",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.var|24",
|
|
"raw_value": "5axis.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/LIB:basic_sim.tcl|31",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/nc_files|12",
|
|
"raw_value": "../../nc_files",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/emc2.gif|13",
|
|
"raw_value": "emc2.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/emc2.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs|16",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.var|19",
|
|
"raw_value": "xyzab-tdr.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/LIB:basic_sim.tcl|23",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/nc_files|13",
|
|
"raw_value": "../../nc_files",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif|14",
|
|
"raw_value": "emc2.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs|21",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl|30",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/nc_files|13",
|
|
"raw_value": "../../nc_files",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif|14",
|
|
"raw_value": "emc2.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/emc2.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs|21",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc.var|26",
|
|
"raw_value": "xyzbc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl|30",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif|10",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var|12",
|
|
"raw_value": "vmc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange|13",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif|10",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var|12",
|
|
"raw_value": "vmc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange|13",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/VMC_toolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/hbm/linuxcnc.gif|10",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hbm/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/hbm/hbm.var|12",
|
|
"raw_value": "hbm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hbm/hbm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs|15",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.var|21",
|
|
"raw_value": "hexapod.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/LIB:basic_sim.tcl|28",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.tbl|49",
|
|
"raw_value": "hexapod.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.var|12",
|
|
"raw_value": "melfa.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs|13",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim|30",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/linuxcnc.gif|31",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/LIB:basic_sim.tcl|7",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/melfa-sim/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/millturn/millturn.var|13",
|
|
"raw_value": "millturn.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn/millturn.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs|14",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/vismach/millturn/halshow ./millturn.halshow|1",
|
|
"raw_value": "halshow ./millturn.halshow",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn/halshow ./millturn.halshow"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/axis/vismach/millturn|31",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/millturn/linuxcnc.gif|32",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/millturn/LIB:basic_sim.tcl|8",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/millturn/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs|13",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma.var|18",
|
|
"raw_value": "puma.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|33",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif|34",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl|7",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs|13",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma560.var|19",
|
|
"raw_value": "puma560.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma560.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|31",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif|32",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl|8",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs|13",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma560.var|18",
|
|
"raw_value": "puma560.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma560.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|30",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif|31",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl|8",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|43",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif|44",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs|50",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma.var|55",
|
|
"raw_value": "puma.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/puma.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl|62",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/puma/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|11",
|
|
"raw_value": "/home/rolf/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill_mm.var|24",
|
|
"raw_value": "rolfmill_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/position_mm.txt|42",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/rolfmill/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/axis/vismach/scara/remap_subs|12",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/scara/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/vismach/scara/scara.var|18",
|
|
"raw_value": "scara.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/scara/scara.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/vismach/scara/LIB:basic_sim.tcl|28",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/scara/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/vismach/scara/scara.tbl|48",
|
|
"raw_value": "scara.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/scara/scara.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/vismach/scara/scara.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/vismach/scara/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/vismach/scara/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.var|22",
|
|
"raw_value": "wrapped_rotary.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/gantry_mm.tbl|40",
|
|
"raw_value": "gantry_mm.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/wrapped_rotary/gantry_mm.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04|15",
|
|
"raw_value": "monitor-xhc-hb04",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl|3",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl|4",
|
|
"raw_value": "LIB:xhc-hb04.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04|15",
|
|
"raw_value": "monitor-xhc-hb04",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl|3",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl|4",
|
|
"raw_value": "LIB:xhc-hb04.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04|15",
|
|
"raw_value": "monitor-xhc-hb04",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/monitor-xhc-hb04"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl|4",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl|5",
|
|
"raw_value": "LIB:xhc-hb04.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/axis/xhc-hb04/LIB:xhc-hb04.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|11",
|
|
"raw_value": "/home/craftsman900/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/craftsman/craftsmancnc.var|24",
|
|
"raw_value": "craftsmancnc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/craftsmancnc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|26",
|
|
"raw_value": "/home/craftsman/linuxcnc/configs/craftsmancnc/macros/",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/craftsman/custom.hal|35",
|
|
"raw_value": "custom.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/custom.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/craftsman/position.txt|47",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/craftsman/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/craftsman/linuxcnc.gif|10",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/configs/sim/craftsman/linuxcnc/nc_files|12",
|
|
"raw_value": "./linuxcnc/nc_files",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/craftsman/craftsmancnc.var|22",
|
|
"raw_value": "craftsmancnc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/craftsmancnc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/craftsman/craftsmancnc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/craftsman/macros|24",
|
|
"raw_value": "./macros/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/craftsman/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/6_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/6_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/6_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/6_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/8_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/8_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/8_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/8_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/9_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/9_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/9_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/9_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|25",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|42",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|10",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|20",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|21",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|38",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|9",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|26",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|44",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|45",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:DISPLAY:EMBED_TAB_COMMAND|unresolved:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.glade|7",
|
|
"raw_value": "pendant_5_axis.glade",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.glade"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini|resource:ini:DISPLAY:EMBED_TAB_COMMAND|unresolved:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.hal|7",
|
|
"raw_value": "pendant_5_axis.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/pendant_5_axis.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|24",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|42",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|24",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|32",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|33",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|50",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|12",
|
|
"raw_value": "/home/emcmesa/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|24",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|21",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/sim.var|32",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|33",
|
|
"raw_value": "./macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/core_sim.hal|40",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/simulated_home.hal|41",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/position.txt|49",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|31",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|32",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|42",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|42",
|
|
"raw_value": "../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|42",
|
|
"raw_value": "../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|44",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|61",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|24",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|27",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|44",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|19",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|20",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|30",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|31",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|51",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|18",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif|19",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/sim.var|29",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|30",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/position.txt|47",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|23",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|23",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|23",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|23",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|22",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|23",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|40",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var|25",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs|26",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros|26",
|
|
"raw_value": "macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt|42",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/lathe_configs/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|25",
|
|
"raw_value": "../../macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.var|24",
|
|
"raw_value": "scara.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/emc2.gif|11",
|
|
"raw_value": "emc2.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/emc2.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples|16",
|
|
"raw_value": "./examples",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/examples"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac.var|17",
|
|
"raw_value": "xyzac.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/LIB:basic_sim.tcl -no_use_hal_manualtoolchange|19",
|
|
"raw_value": "LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/LIB:basic_sim.tcl -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|18",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/linuxcnc.gif|19",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/sim.var|29",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gmoccapy/macros|30",
|
|
"raw_value": "./macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/simulated_home.hal|38",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/position.txt|46",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gmoccapy/plasma_config/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|24",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/sim.var|33",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/core_sim.hal|40",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal|41",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal|42",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/simulated_home.hal|43",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/position.txt|50",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim-9gscreen.var|24",
|
|
"raw_value": "sim-9gscreen.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim-9gscreen.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/LIB:basic_sim.tcl|30",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/locking_indexer.hal|31",
|
|
"raw_value": "locking_indexer.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/locking_indexer.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position9.txt|37",
|
|
"raw_value": "position9.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position9.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var|20",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal|27",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal|28",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal|29",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal|30",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt|38",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var|20",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal|27",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal|28",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal|29",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal|30",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt|38",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var|21",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal|28",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal|29",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal|30",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal|31",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt|39",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var|15",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal|22",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal|23",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal|24",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal|25",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt|33",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|6",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|7",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.var|21",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal|28",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal|29",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal|30",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal|31",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position_mm.txt|41",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.tbl|44",
|
|
"raw_value": "sim_mm.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/gscreen_custom/sim_mm.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/sim.var|24",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/LIB:basic_sim.tcl|32",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_lathe.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/position.txt|39",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/sim_mm.var|21",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/core_sim.hal|28",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal|29",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal|30",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/simulated_home.hal|31",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/gscreen_mm.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/position_mm.txt|40",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|14",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gscreen|24",
|
|
"raw_value": "../",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear|24",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/LIB:basic_sim.tcl|34",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/position.txt|41",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/industrial_lathe_wear/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|41",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif|42",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|51",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|51",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/sim.var|53",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl|61",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/position.txt|67",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|41",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif|42",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|51",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|51",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/sim.var|53",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl|61",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/ngcgui/position.txt|67",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/ngcgui/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|16",
|
|
"raw_value": "/home/jim/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/linuxcnc.gif|17",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/sim.var|27",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/macros|28",
|
|
"raw_value": "macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/core_sim.hal|37",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/simulated_home.hal|38",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/gscreen/silverdragon/position.txt|57",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/silverdragon/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.gif|15",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|17",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/gscreen/spartan/spartan.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.var|25",
|
|
"raw_value": "linuxcnc.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/gscreen/spartan/linuxcnc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|13",
|
|
"raw_value": "/media/imac/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var|26",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal|33",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal|34",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal|35",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt|45",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|12",
|
|
"raw_value": "/root/emc2/ngc/",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var|25",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal|32",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal|33",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal|34",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt|44",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:None|15",
|
|
"raw_value": "/media/imac/linuxcnc/nc_files",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var|28",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal|35",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal|36",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal|37",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt|47",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/pyvcp_demo/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtaxis/gantry/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py|18",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py|19",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py|20",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtaxis/gantry/toolpaths.py|21",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtaxis/gantry/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/gantry/gantrysim.hal|29",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/gantry/sim_spindle_encoder.hal|30",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/gantry/simulated-gantry-home.hal|31",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtaxis/gantry/WORKINGFOLDER/qtaxis_gantry.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtaxis_gantry.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/gantry/WORKINGFOLDER/qtaxis_gantry.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/silver_dragon.png|19",
|
|
"raw_value": "silver_dragon.png",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/silver_dragon.png"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/mdi_history.dat|24",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/qtdragon_scara.log|25",
|
|
"raw_value": "qtdragon_scara.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/qtdragon_scara.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs|33",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.var|39",
|
|
"raw_value": "scara.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtdragon_scara.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/LIB:basic_sim.tcl|60",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/non-trivial/scara/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|24",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtaxis/xyz/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtaxis/xyz/sim.var|52",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|53",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtaxis/xyz/WORKINGFOLDER/qtaxis.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtaxis.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/WORKINGFOLDER/qtaxis.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/xyz/core_sim.hal|61",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/xyz/sim_spindle_encoder.hal|62",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtaxis/xyz/simulated_home.hal|63",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtaxis/xyz/position.txt|74",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtaxis/xyz/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log|28",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var|43",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|45",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal|61",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-xyyz-home.hal|62",
|
|
"raw_value": "simulated-xyyz-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-xyyz-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log|28",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var|43",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|45",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal|61",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal|62",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal|64",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal|65",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.log|28",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.var|43",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe|45",
|
|
"raw_value": "\\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/core_sim.hal|64",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/simulated_home.hal|65",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log|28",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var|64",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|66",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|66",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|66",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal|82",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal|83",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log|28",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var|64",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|66",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|66",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|66",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal|82",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal|83",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|27",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat|31",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log|32",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var|47",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|49",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|49",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|49",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/gantrysim.hal|65",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated-gantry-home.hal|66",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/gantrysim.hal|64",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated-gantry-home.hal|65",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd.log|28",
|
|
"raw_value": "qtdragon_hd.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var|43",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|45",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim.hal|61",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal|62",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon_hd.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/gantrysim.hal|64",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated-gantry-home.hal|65",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon_hd.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon_hd.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal|65",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat|30",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log|31",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var|46",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|48",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal|65",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|23",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/mdi_history.dat|27",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd.log|28",
|
|
"raw_value": "qtdragon_hd.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon.var|43",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|45",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|45",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/core_sim.hal|61",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/simulated_home.hal|62",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/WORKINGFOLDER/qtdragon_hd.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon_hd.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/WORKINGFOLDER/qtdragon_hd.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt|9",
|
|
"raw_value": "imperial_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7~dup2",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt|9",
|
|
"raw_value": "metric_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7~dup3",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt|9",
|
|
"raw_value": "imperial_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7~dup4",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt|9",
|
|
"raw_value": "metric_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7~dup5",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt|9",
|
|
"raw_value": "imperial_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/imperial_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/sim_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui|7~dup6",
|
|
"raw_value": "qtplasmac_sim.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/qtplasmac_sim.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt|9",
|
|
"raw_value": "metric_mdi_history.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtplasmac/metric_mdi_history.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qtvcp_postgui.hal|resource:hal:loadusr|unresolved:linuxcnc/configs/sim/qttouchy/sim_panel.ui|16",
|
|
"raw_value": "sim_panel.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/sim_panel.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|16",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qttouchy/linuxcnc.gif|17",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qttouchy/sim.var|45",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|46",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qttouchy/core_sim.hal|54",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qttouchy/sim_spindle_encoder.hal|55",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qttouchy/simulated_home.hal|56",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qttouchy/WORKINGFOLDER/qttouchy.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qttouchy.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/WORKINGFOLDER/qttouchy.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qttouchy/qttouchy.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qttouchy/position.txt|66",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qttouchy/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|16",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|17",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|44",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|45",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|53",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|54",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|55",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/blender.pref|5",
|
|
"raw_value": "WORKINGFOLDER/blender.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/blender.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/blender.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|66",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|20",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/linuxcnc.gif|21",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens|30",
|
|
"raw_value": "../",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear|30",
|
|
"raw_value": "./",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/macros/lathe|30",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|30",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/sim.var|33",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/LIB:basic_sim.tcl -no_use_hal_manualtoolchange|45",
|
|
"raw_value": "LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/LIB:basic_sim.tcl -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/position.txt|52",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/WORKINGFOLDER/qtlathe.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtlathe.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/WORKINGFOLDER/qtlathe.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/silver_dragon.png|20",
|
|
"raw_value": "silver_dragon.png",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/silver_dragon.png"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/mdi_history.dat|25",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/qtdragon_scara.log|26",
|
|
"raw_value": "qtdragon_scara.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/qtdragon_scara.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs|34",
|
|
"raw_value": "./remap_subs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/remap_subs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.var|40",
|
|
"raw_value": "scara.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtdragon_scara.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/WORKINGFOLDER/qtdragon_scara.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/LIB:basic_sim.tcl|61",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini|resource:ini:EMCIO:TOOL_TABLE|unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.tbl|67",
|
|
"raw_value": "scara.tbl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|34",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|35",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/axis_manualtoolchange.hal|36",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|37",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|48",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:DISPLAY:DISPLAY|unresolved:linuxcnc/configs/sim/qtvcp_screens/qt_cnc_800x600.ui|4",
|
|
"raw_value": "qt_cnc_800x600.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qt_cnc_800x600.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_800x600.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qt_cnc_800x600.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_800x600.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|18",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|19",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|20",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py|21",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal|29",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|30",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal|31",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis_gantry.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtaxis_gantry.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis_gantry.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|24",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|53",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|54",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtaxis.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|62",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|63",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|64",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|75",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|17",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/linuxcnc.gif|18",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/sim.var|44",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|45",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/LIB:basic_sim.tcl -no_use_hal_manualtoolchange|58",
|
|
"raw_value": "LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/LIB:basic_sim.tcl -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/WORKINGFOLDER/qtaxis_lathe.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtaxis_lathe.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/WORKINGFOLDER/qtaxis_lathe.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/position.txt|69",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|19",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|20",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|48",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|49",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|57",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|58",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|59",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtaxis.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtaxis.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|73",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|19",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|20",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|47",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|48",
|
|
"raw_value": "",
|
|
"status": "empty",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/macros/mill|48",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/macros/mill",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/macros/mill"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|48",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/probe|48",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/probe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/probe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|56",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|57",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|58",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qt_cnc.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|69",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|11",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|12",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|32",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/LIB:basic_sim.tcl -no_use_hal_manualtoolchange|41",
|
|
"raw_value": "LIB:basic_sim.tcl -no_use_hal_manualtoolchange",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/LIB:basic_sim.tcl -no_use_hal_manualtoolchange"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/locking_indexer.hal|42",
|
|
"raw_value": "locking_indexer.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/locking_indexer.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position9.txt|46",
|
|
"raw_value": "position9.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position9.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_9axis.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qt_cnc_9axis.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_9axis.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|13",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|14",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|21",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|22",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py|23",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py|24",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal|32",
|
|
"raw_value": "gantrysim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/gantrysim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|33",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal|34",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_gantry.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qt_cnc_gantry.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_gantry.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_mm.var|24",
|
|
"raw_value": "sim_mm.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_mm.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|33",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|34",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|35",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position_mm.txt|45",
|
|
"raw_value": "position_mm.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position_mm.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_mm.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qt_cnc_mm.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qt_cnc_mm.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|27",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|29",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|30",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|68",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|70",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|70",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal|88",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|27",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|29",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|30",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|45",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|47",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap-subroutines|47",
|
|
"raw_value": "../../../../nc_files/remap-subroutines",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap-subroutines"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/remap_lib|47",
|
|
"raw_value": "../../../../nc_files/remap_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/remap_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal|67",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|28",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|30",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|32",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|33",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|50",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|52",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|52",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal|70",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|27",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|29",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|30",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|65",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|67",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal|85",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|32",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|34",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|51",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|53",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-xyyz-home.hal|71",
|
|
"raw_value": "simulated-xyyz-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-xyyz-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|32",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|34",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|51",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|53",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal|72",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|29",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|31",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|34",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|36",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|53",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|55",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal|73",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|32",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|34",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|51",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|53",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal|71",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif|29",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|31",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:DISPLAY:MDI_HISTORY_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat|34",
|
|
"raw_value": "mdi_history.dat",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/mdi_history.dat"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log|36",
|
|
"raw_value": "qtdragon.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var|53",
|
|
"raw_value": "qtdragon.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/probe/basic_probe/macros|55",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal|73",
|
|
"raw_value": "simulated-gantry-home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/simulated-gantry-home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref|7",
|
|
"raw_value": "WORKINGFOLDER/qtdragon.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtdragon/WORKINGFOLDER/qtdragon.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim.var|54",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|55",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|55",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/core_sim.hal|64",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim_spindle_encoder.hal|65",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/simulated_home.hal|66",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/position.txt|77",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|18",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif|19",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var|58",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|59",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|59",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal|68",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal|69",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal|70",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt|81",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|18",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif|19",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var|58",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|59",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|59",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal|68",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal|69",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal|70",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt|81",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var|54",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|55",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|55",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal|64",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal|65",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal|66",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt|77",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|16",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|17",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|43",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/probe|44",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/probe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/probe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|52",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|53",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|54",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtx11mill.pref|5",
|
|
"raw_value": "WORKINGFOLDER/qtx11mill.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/WORKINGFOLDER/qtx11mill.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|65",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py|0",
|
|
"raw_value": "linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap_lib/python-stdglue/stdglue.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|15",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif|16",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/macros/lathe|27",
|
|
"raw_value": "~/linuxcnc/nc_files/macros/lathe",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/macros/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal|35",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal|36",
|
|
"raw_value": "sim_spindle_encoder.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/sim_spindle_encoder.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal|37",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt|47",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/qtvcp_screens/tester.ini|resource:ini:DISPLAY:DISPLAY|unresolved:linuxcnc/configs/sim/qtvcp_screens/tester.ui|4",
|
|
"raw_value": "tester.ui",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/qtvcp_screens/tester.ui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var|23",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/sim_ldelta.hal|27",
|
|
"raw_value": "sim_ldelta.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/sim_ldelta.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/axis_manualtoolchange.hal|28",
|
|
"raw_value": "axis_manualtoolchange.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/axis_manualtoolchange.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|8",
|
|
"raw_value": "../../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/ldelta.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif|9",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var|13",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/servo_sim.hal|20",
|
|
"raw_value": "servo_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/servo_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|12",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif|13",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var|15",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/core_sim.hal|27",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|10",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif|11",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py|16",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py|17",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py|18",
|
|
"raw_value": "image-to-gcode.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/image-to-gcode.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:filter_command|unresolved:linuxcnc/configs/sim/tklinuxcnc/toolpaths.py|19",
|
|
"raw_value": "toolpaths.py",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/toolpaths.py"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var|21",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/tklinuxcnc/tripod.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/tklinuxcnc/tripodsim.hal|27",
|
|
"raw_value": "tripodsim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/tklinuxcnc/tripodsim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/gladevcp/sim.var|10",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/gladevcp_lib|11",
|
|
"raw_value": "../../nc_files/gladevcp_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/gladevcp_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal|18",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|7",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif|8",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/gladevcp/sim.var|12",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal|19",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|5",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/gladevcp/touchy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif|6",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/gladevcp/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|21",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|24",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|24",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl|33",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif|25",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim-lathe.var|33",
|
|
"raw_value": "sim-lathe.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim-lathe.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/lathe|34",
|
|
"raw_value": "../../nc_files/ngcgui_lib/lathe",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/lathe"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|34",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|3",
|
|
"raw_value": "../../nc_files",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl|43",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:APPLICATIONS:APP|unresolved:linuxcnc/configs/sim/touchy/ngcgui/moveoff_gui|114",
|
|
"raw_value": "moveoff_gui \\",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/moveoff_gui"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|21",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif|22",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib|24",
|
|
"raw_value": "../../nc_files/ngcgui_lib",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs|24",
|
|
"raw_value": "../../nc_files/ngcgui_lib/utilitysubs",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim.var|26",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl|34",
|
|
"raw_value": "LIB:basic_sim.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:basic_sim.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:hookup_moveoff.tcl|35",
|
|
"raw_value": "LIB:hookup_moveoff.tcl",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/ngcgui/LIB:hookup_moveoff.tcl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/touchy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/touchy/sim.var|12",
|
|
"raw_value": "sim.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/touchy.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/touchy/core_sim.hal|17",
|
|
"raw_value": "core_sim.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/core_sim.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/touchy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:linuxcnc/nc_files|7",
|
|
"raw_value": "../../nc_files/",
|
|
"status": "resolved_directory",
|
|
"to_source_id": "unresolved:linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/touchy/touchy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/touchy/linuxcnc.gif|8",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/touchy/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|24",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|29",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|44",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:nc_files/probe/basic_probe/macros|46",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal|63",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|23",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|25",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|28",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|52",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|54",
|
|
"raw_value": "/home/.../linuxcnc/nc_files/examples/remap-subroutines",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|54~dup2",
|
|
"raw_value": "/home/.../linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|54~dup3",
|
|
"raw_value": "/home/.../linuxcnc/nc_files/remap_lib",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|6",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal|74",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|24",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|31",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|47",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:nc_files/probe/basic_probe/macros|49",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini|resource:ini:HAL:HALFILE|unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal|67",
|
|
"raw_value": "simulated_home.hal",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/simulated_home.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|34",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|72",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:nc_files/probe/basic_probe/macros|74",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/woodpecker/position.txt|89",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|34",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|61",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:None|63",
|
|
"raw_value": "/home/.../linuxcnc/nc_files/probe/basic_probe/macros",
|
|
"status": "outside_repo",
|
|
"to_source_id": "unresolved:None"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib|63",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs|63",
|
|
"raw_value": "~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/metric_parameters.txt|64",
|
|
"raw_value": "metric_parameters.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/metric_parameters.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini|resource:ini:TRAJ:POSITION_FILE|unresolved:linuxcnc/configs/sim/woodpecker/position.txt|77",
|
|
"raw_value": "position.txt",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/position.txt"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|24",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|26",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|31",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|47",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:nc_files/probe/basic_probe/macros|49",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:directory_member|unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc|0",
|
|
"raw_value": "linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/nc_files/remap-subroutines/qt_auto_probe_tool.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:DISPLAY:INTRO_GRAPHIC|unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif|27",
|
|
"raw_value": "linuxcnc.gif",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:DISPLAY:PROGRAM_PREFIX|unresolved:~/linuxcnc/nc_files|29",
|
|
"raw_value": "~/linuxcnc/nc_files",
|
|
"status": "host_or_variable_path",
|
|
"to_source_id": "unresolved:~/linuxcnc/nc_files"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:DISPLAY:LOG_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log|34",
|
|
"raw_value": "woodpecker.log",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.log"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:RS274NGC:PARAMETER_FILE|unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var|50",
|
|
"raw_value": "woodpecker.var",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/woodpecker.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:RS274NGC:SUBROUTINE_PATH|unresolved:nc_files/probe/basic_probe/macros|52",
|
|
"raw_value": "../../../../nc_files/probe/basic_probe/macros",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:nc_files/probe/basic_probe/macros"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:file:linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini|resource:ini:DISPLAY:PREFERENCE_FILE_PATH|unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref|5",
|
|
"raw_value": "WORKINGFOLDER/woodpecker.pref",
|
|
"status": "missing",
|
|
"to_source_id": "unresolved:linuxcnc/configs/sim/woodpecker/WORKINGFOLDER/woodpecker.pref"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/.gitattributes|None",
|
|
"raw_value": "linuxcnc/.gitattributes",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/.gitattributes"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/.gitignore|None",
|
|
"raw_value": "linuxcnc/.gitignore",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/.gitignore"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/COPYING|None",
|
|
"raw_value": "linuxcnc/COPYING",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/COPYING"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/COPYING.more|None",
|
|
"raw_value": "linuxcnc/COPYING.more",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/COPYING.more"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/ISSUE_TEMPLATE.md|None",
|
|
"raw_value": "linuxcnc/ISSUE_TEMPLATE.md",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/ISSUE_TEMPLATE.md"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/README.md|None",
|
|
"raw_value": "linuxcnc/README.md",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/README.md"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/TODO|None",
|
|
"raw_value": "linuxcnc/TODO",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/TODO"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/linuxcnc-wizard.gif|None",
|
|
"raw_value": "linuxcnc/linuxcnc-wizard.gif",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/linuxcnc-wizard.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/linuxcnc.gif|None",
|
|
"raw_value": "linuxcnc/linuxcnc.gif",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/linuxcnc.gif"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/linuxcnc.xcf|None",
|
|
"raw_value": "linuxcnc/linuxcnc.xcf",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/linuxcnc.xcf"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/meson.build|test_input|unindexed:linuxcnc/linuxcncicon.png|None",
|
|
"raw_value": "linuxcnc/linuxcncicon.png",
|
|
"status": "unindexed",
|
|
"to_source_id": "unindexed:linuxcnc/linuxcncicon.png"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/abort/feed-rate/test.sh|test_config_ref|unresolved:linuxcnc/tests/abort/feed-rate/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/abort/feed-rate/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/abort/feed-rate/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/ccomp/early-exit/test.sh|test_config_ref|unresolved:linuxcnc/tests/ccomp/early-exit/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/ccomp/early-exit/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/ccomp/early-exit/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/classicladder/estop/test.sh|test_config_ref|unresolved:linuxcnc/tests/classicladder/estop/$0)/classicladder-estop.ini|None",
|
|
"raw_value": "linuxcnc/tests/classicladder/estop/$0)/classicladder-estop.ini",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/classicladder/estop/$0)/classicladder-estop.ini"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/halcompile/personalities_mod/test.sh|test_config_ref|unresolved:linuxcnc/tests/halcompile/personalities_mod/*.hal|None",
|
|
"raw_value": "linuxcnc/tests/halcompile/personalities_mod/*.hal",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/halcompile/personalities_mod/*.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/halcompile/userspace-count-names/test.sh|test_config_ref|unresolved:linuxcnc/tests/halcompile/userspace-count-names/*.hal|None",
|
|
"raw_value": "linuxcnc/tests/halcompile/userspace-count-names/*.hal",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/halcompile/userspace-count-names/*.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/hard-limits/test.sh|test_config_ref|unresolved:linuxcnc/tests/hard-limits/rs274ngc.var|None",
|
|
"raw_value": "linuxcnc/tests/hard-limits/rs274ngc.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/hard-limits/rs274ngc.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/interp/g52/g92-offset-persistence/test.sh|test_config_ref|unresolved:linuxcnc/tests/interp/g52/g92-offset-persistence/g92_offsets.var|None",
|
|
"raw_value": "linuxcnc/tests/interp/g52/g92-offset-persistence/g92_offsets.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/interp/g52/g92-offset-persistence/g92_offsets.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/interp/m98m99/11-main-program-oword/test.sh|test_config_ref|unresolved:linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-${t}.ngc|None",
|
|
"raw_value": "linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-${t}.ngc",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-${t}.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/interp/m98m99/11-main-program-oword/test.sh|test_config_ref|unresolved:linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-${t}.ngc|None",
|
|
"raw_value": "linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-${t}.ngc",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-${t}.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/interp/subroutine-return/test.sh|test_config_ref|unresolved:linuxcnc/tests/interp/subroutine-return/subs/sub.ngc|None",
|
|
"raw_value": "linuxcnc/tests/interp/subroutine-return/subs/sub.ngc",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/interp/subroutine-return/subs/sub.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/interp/subroutine-return/test.sh|test_config_ref|unresolved:linuxcnc/tests/interp/subroutine-return/test.ngc|None",
|
|
"raw_value": "linuxcnc/tests/interp/subroutine-return/test.ngc",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/interp/subroutine-return/test.ngc"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/io-startup/nonrandom/no-tool-in-P0/test.sh|test_config_ref|unresolved:linuxcnc/tests/io-startup/nonrandom/no-tool-in-P0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/io-startup/nonrandom/no-tool-in-P0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/io-startup/nonrandom/no-tool-in-P0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/io-startup/nonrandom/tool-in-P0/test.sh|test_config_ref|unresolved:linuxcnc/tests/io-startup/nonrandom/tool-in-P0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/io-startup/nonrandom/tool-in-P0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/io-startup/nonrandom/tool-in-P0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/io-startup/random/no-tool-in-P0/test.sh|test_config_ref|unresolved:linuxcnc/tests/io-startup/random/no-tool-in-P0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/io-startup/random/no-tool-in-P0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/io-startup/random/no-tool-in-P0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/io-startup/random/tool-in-P0/test.sh|test_config_ref|unresolved:linuxcnc/tests/io-startup/random/tool-in-P0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/io-startup/random/tool-in-P0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/io-startup/random/tool-in-P0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/limit3/checkresult|test_config_ref|unresolved:linuxcnc/tests/limit3/test.hal|None",
|
|
"raw_value": "linuxcnc/tests/limit3/test.hal",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/limit3/test.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/matrixkins/test.sh|test_config_ref|unresolved:linuxcnc/tests/matrixkins/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/matrixkins/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/matrixkins/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/mdi-queue-length/test.sh|test_config_ref|unresolved:linuxcnc/tests/mdi-queue-length/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/mdi-queue-length/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/mdi-queue-length/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/motion/g0/checkresult|test_config_ref|unresolved:linuxcnc/tests/motion/g0/%s/motion-test.ini|None",
|
|
"raw_value": "linuxcnc/tests/motion/g0/%s/motion-test.ini",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/motion/g0/%s/motion-test.ini"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/mqtt/test.sh|test_config_ref|unresolved:linuxcnc/tests/mqtt/simulator.var|None",
|
|
"raw_value": "linuxcnc/tests/mqtt/simulator.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/mqtt/simulator.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/overrun/test.sh|test_config_ref|unresolved:linuxcnc/tests/overrun/$TMPDIR/test.hal|None",
|
|
"raw_value": "linuxcnc/tests/overrun/$TMPDIR/test.hal",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/overrun/$TMPDIR/test.hal"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/startup-state/test.sh|test_config_ref|unresolved:linuxcnc/tests/startup-state/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/startup-state/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/startup-state/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/nonrandom/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/nonrandom/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/t0/nonrandom/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/nonrandom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/nonrandom/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/nonrandom/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/t0/nonrandom/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/nonrandom/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/random-with-t0/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/random-with-t0/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/t0/random-with-t0/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/random-with-t0/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/random-with-t0/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/random-with-t0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/t0/random-with-t0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/random-with-t0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/random-without-t0/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/random-without-t0/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/t0/random-without-t0/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/random-without-t0/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/t0/random-without-t0/test.sh|test_config_ref|unresolved:linuxcnc/tests/t0/random-without-t0/tool.tbl|None",
|
|
"raw_value": "linuxcnc/tests/t0/random-without-t0/tool.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/t0/random-without-t0/tool.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/tlo/test.sh|test_config_ref|unresolved:linuxcnc/tests/tlo/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/tlo/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/tlo/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/tlo/test.sh|test_config_ref|unresolved:linuxcnc/tests/tlo/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/tlo/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/tlo/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/tool-info/non-random/test.sh|test_config_ref|unresolved:linuxcnc/tests/tool-info/non-random/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/tool-info/non-random/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/tool-info/non-random/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/tool-info/random-no-startup-tool/test.sh|test_config_ref|unresolved:linuxcnc/tests/tool-info/random-no-startup-tool/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/tool-info/random-no-startup-tool/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/tool-info/random-no-startup-tool/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/tool-info/random-with-startup-tool/test.sh|test_config_ref|unresolved:linuxcnc/tests/tool-info/random-with-startup-tool/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/tool-info/random-with-startup-tool/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/tool-info/random-with-startup-tool/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/m61/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/m61/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/m61/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/m61/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/reload-tool/non-random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/reload-tool/non-random/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/reload-tool/non-random/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/reload-tool/non-random/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/reload-tool/non-random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/reload-tool/non-random/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/reload-tool/non-random/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/reload-tool/non-random/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/reload-tool/random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/reload-tool/random/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/reload-tool/random/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/reload-tool/random/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/reload-tool/random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/reload-tool/random/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/reload-tool/random/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/reload-tool/random/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom/simpockets.tbl"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/sim.var|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/toolno-pocket-differ/random/sim.var",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/sim.var"
|
|
},
|
|
{
|
|
"edge_id": "edge:src:test:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/test.sh|test_config_ref|unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/simpockets.tbl|None",
|
|
"raw_value": "linuxcnc/tests/toolchanger/toolno-pocket-differ/random/simpockets.tbl",
|
|
"status": "unresolved",
|
|
"to_source_id": "unresolved:linuxcnc/tests/toolchanger/toolno-pocket-differ/random/simpockets.tbl"
|
|
}
|
|
],
|
|
"unresolved_edges": 1475
|
|
}
|