158 lines
3.6 KiB
INI
158 lines
3.6 KiB
INI
# EMC controller parameters for a simulated machine.
|
|
|
|
# General note: Comments can either be preceded with a # or ; - either is
|
|
# acceptable, although # is in keeping with most linux config files.
|
|
|
|
# General section -------------------------------------------------------------
|
|
[EMC]
|
|
# Version of this INI file
|
|
VERSION = 1.1
|
|
|
|
# Name of machine, for use with display, etc.
|
|
MACHINE = LinuxCNC-HAL-SIM-TkLinuxCNC
|
|
|
|
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
|
DEBUG = 0
|
|
|
|
# Sections for display options ------------------------------------------------
|
|
[DISPLAY]
|
|
|
|
DISPLAY = tklinuxcnc
|
|
|
|
# Cycle time, in seconds, that display will sleep between polls
|
|
CYCLE_TIME = 0.100
|
|
|
|
# Path to help file
|
|
HELP_FILE = tklinuxcnc.txt
|
|
|
|
# Initial display setting for position, RELATIVE or MACHINE
|
|
POSITION_OFFSET = RELATIVE
|
|
|
|
# Initial display setting for position, COMMANDED or ACTUAL
|
|
POSITION_FEEDBACK = ACTUAL
|
|
|
|
# Highest value that will be allowed for feed override, 1.0 = 100%
|
|
MAX_FEED_OVERRIDE = 1.2
|
|
|
|
# Lowest value that will be allowed for spindle speed override, 1.0 = 100%
|
|
MIN_SPINDLE_OVERRIDE = 0.5
|
|
|
|
# Highest value that will be allowed for spindle speed override, 1.0 = 100%
|
|
MAX_SPINDLE_OVERRIDE = 1.5
|
|
|
|
# Prefix to be used
|
|
PROGRAM_PREFIX = ../../nc_files/
|
|
|
|
# Introductory graphic
|
|
INTRO_GRAPHIC = linuxcnc.gif
|
|
INTRO_TIME = 5
|
|
|
|
# Part program interpreter section --------------------------------------------
|
|
[RS274NGC]
|
|
# File containing interpreter variables
|
|
PARAMETER_FILE = sim.var
|
|
|
|
[EMCMOT]
|
|
EMCMOT = motmod
|
|
|
|
# Timeout for comm to emcmot, in seconds
|
|
COMM_TIMEOUT = 1.0
|
|
|
|
# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
|
|
BASE_PERIOD = 0
|
|
# Servo task period, in nano-seconds
|
|
SERVO_PERIOD = 1000000
|
|
|
|
# section for main IO controller parameters -----------------------------------
|
|
[EMCIO]
|
|
# tool table file
|
|
TOOL_TABLE = sim.tbl
|
|
|
|
[KINS]
|
|
KINEMATICS = trivkins
|
|
JOINTS = 3
|
|
|
|
[TASK]
|
|
|
|
# Name of task controller program, e.g., milltask
|
|
TASK = milltask
|
|
|
|
# Cycle time, in seconds, that task controller will sleep between polls
|
|
CYCLE_TIME = 0.010
|
|
|
|
# Hardware Abstraction Layer section --------------------------------------------------
|
|
[HAL]
|
|
# The run script first uses halcmd to execute any HALFILE
|
|
# files, and then to execute any individual HALCMD commands.
|
|
#
|
|
|
|
# list of hal config files to run through halcmd
|
|
# files are executed in the order in which they appear
|
|
HALFILE = core_sim.hal
|
|
|
|
# list of halcmd commands to execute
|
|
# commands are executed in the order in which they appear
|
|
#HALCMD = save neta
|
|
|
|
# Trajectory planner section --------------------------------------------------
|
|
[TRAJ]
|
|
COORDINATES = X Y Z
|
|
LINEAR_UNITS = inch
|
|
ANGULAR_UNITS = degree
|
|
DEFAULT_LINEAR_VELOCITY = 0.0167
|
|
MAX_LINEAR_VELOCITY = 1.2
|
|
DEFAULT_LINEAR_ACCELERATION = 20.0
|
|
MAX_LINEAR_ACCELERATION = 20.0
|
|
|
|
# Axes sections ---------------------------------------------------------------
|
|
[AXIS_X]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_0]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
|
|
[AXIS_Y]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_1]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
|
|
[AXIS_Z]
|
|
MIN_LIMIT = -2.0
|
|
MAX_LIMIT = 4.0
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_2]
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 1.2
|
|
MAX_ACCELERATION = 20.0
|
|
MIN_LIMIT = -2.0
|
|
MAX_LIMIT = 4.0
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|