62 lines
2.0 KiB
Plaintext
62 lines
2.0 KiB
Plaintext
# core HAL config file for simulation
|
|
|
|
# first load all the RT modules that will be needed
|
|
# kinematics
|
|
loadrt trivkins
|
|
# motion controller, get name and thread periods from INI file
|
|
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES
|
|
# load 6 differentiators (for velocity and accel signals
|
|
loadrt ddt count=6
|
|
# load additional blocks
|
|
loadrt hypot count=2
|
|
loadrt comp count=3
|
|
loadrt or2 count=1
|
|
|
|
# add motion controller functions to servo thread
|
|
addf motion-command-handler servo-thread
|
|
addf motion-controller servo-thread
|
|
# link the differentiator functions into the code
|
|
addf ddt.0 servo-thread
|
|
addf ddt.1 servo-thread
|
|
addf ddt.2 servo-thread
|
|
addf ddt.3 servo-thread
|
|
addf ddt.4 servo-thread
|
|
addf ddt.5 servo-thread
|
|
addf hypot.0 servo-thread
|
|
addf hypot.1 servo-thread
|
|
|
|
# create HAL signals for position commands from motion module
|
|
# loop position commands back to motion module feedback
|
|
net Xpos joint.0.motor-pos-cmd => joint.0.motor-pos-fb ddt.0.in
|
|
net Ypos joint.1.motor-pos-cmd => joint.1.motor-pos-fb ddt.2.in
|
|
net Zpos joint.2.motor-pos-cmd => joint.2.motor-pos-fb ddt.4.in
|
|
|
|
# send the position commands thru differentiators to
|
|
# generate velocity and accel signals
|
|
net Xvel ddt.0.out => ddt.1.in hypot.0.in0
|
|
net Xacc <= ddt.1.out
|
|
net Yvel ddt.2.out => ddt.3.in hypot.0.in1
|
|
net Yacc <= ddt.3.out
|
|
net Zvel ddt.4.out => ddt.5.in hypot.1.in0
|
|
net Zacc <= ddt.5.out
|
|
|
|
# Cartesian 2- and 3-axis velocities
|
|
net XYvel hypot.0.out => hypot.1.in1
|
|
net XYZvel <= hypot.1.out
|
|
|
|
# estop loopback
|
|
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
|
|
|
|
# create signals for tool loading loopback
|
|
net tool-prepare <= iocontrol.0.tool-prepare
|
|
net tool-prepared => iocontrol.0.tool-prepared
|
|
|
|
net tool-change <= iocontrol.0.tool-change
|
|
net tool-changed => iocontrol.0.tool-changed
|
|
|
|
net tool-number <= iocontrol.0.tool-number
|
|
net tool-prep-number <= iocontrol.0.tool-prep-number
|
|
net tool-prep-pocket <= iocontrol.0.tool-prep-pocket
|
|
net tool-from-pocket <= iocontrol.0.tool-from-pocket
|
|
|