217 lines
5.1 KiB
INI
217 lines
5.1 KiB
INI
# This config file was created 2018-11-21 06:26:44.941844 by the update_ini script
|
|
# The original config files may be found in the /home/john/linuxcnc/configs/rolfmill/rolfmill.old directory
|
|
|
|
# EMC controller parameters for a simulated machine.
|
|
|
|
# General note: Comments can either be preceded with a # or ; - either is
|
|
# acceptable, although # is in keeping with most linux config files.
|
|
|
|
# General section -------------------------------------------------------------
|
|
[EMC]
|
|
|
|
|
|
# Version of this INI file
|
|
VERSION = 1.0
|
|
|
|
# Name of machine, for use with display, etc.
|
|
MACHINE = 3axis-tutorial
|
|
|
|
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
|
# DEBUG = 0x7FFFFFFF
|
|
DEBUG = 0
|
|
|
|
# Sections for display options ------------------------------------------------
|
|
[DISPLAY]
|
|
|
|
# Name of display program, e.g., xemc
|
|
DISPLAY = axis
|
|
|
|
# Cycle time, in seconds, that display will sleep between polls
|
|
CYCLE_TIME = 0.100
|
|
|
|
# Path to help file
|
|
HELP_FILE = doc/help.txt
|
|
|
|
# Initial display setting for position, RELATIVE or MACHINE
|
|
POSITION_OFFSET = RELATIVE
|
|
|
|
# Initial display setting for position, COMMANDED or ACTUAL
|
|
POSITION_FEEDBACK = ACTUAL
|
|
|
|
# Highest value that will be allowed for feed override, 1.0 = 100%
|
|
MAX_FEED_OVERRIDE = 1.2
|
|
MAX_SPINDLE_OVERRIDE = 1.0
|
|
# Prefix to be used
|
|
PROGRAM_PREFIX =/home/rolf/linuxcnc/nc_files #need to change
|
|
|
|
# Introductory graphic
|
|
INTRO_GRAPHIC = linuxcnc.gif
|
|
INTRO_TIME = 5
|
|
|
|
#EDITOR = geany
|
|
|
|
INCREMENTS = 1 mm, .01 in, .1mm, 1 mil, .1 mil, 1/8000 in
|
|
|
|
[FILTER]
|
|
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
|
|
PROGRAM_EXTENSION = .py Python Script
|
|
|
|
png = image-to-gcode
|
|
gif = image-to-gcode
|
|
jpg = image-to-gcode
|
|
py = python3
|
|
|
|
# Task controller section -----------------------------------------------------
|
|
|
|
[RS274NGC]
|
|
|
|
# File containing interpreter variables
|
|
PARAMETER_FILE = 3axis-tutorial_mm.var
|
|
|
|
# Motion control section ------------------------------------------------------
|
|
[EMCMOT]
|
|
|
|
|
|
EMCMOT = motmod
|
|
|
|
# Timeout for comm to emcmot, in seconds
|
|
COMM_TIMEOUT = 1.0
|
|
|
|
|
|
# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
|
|
BASE_PERIOD = 0
|
|
# Servo task period, in nano-seconds
|
|
SERVO_PERIOD = 1000000
|
|
|
|
# Hardware Abstraction Layer section --------------------------------------------------
|
|
[TASK]
|
|
|
|
# Name of task controller program, e.g., milltask
|
|
TASK = milltask
|
|
|
|
# Cycle time, in seconds, that task controller will sleep between polls
|
|
CYCLE_TIME = 0.001
|
|
|
|
# Part program interpreter section --------------------------------------------
|
|
|
|
[HAL]
|
|
|
|
# The run script first uses halcmd to execute any HALFILE
|
|
# files, and then to execute any individual HALCMD commands.
|
|
#
|
|
|
|
# list of hal config files to run through halcmd
|
|
# files are executed in the order in which they appear
|
|
HALFILE = 3axis-tutorial.hal
|
|
|
|
# list of halcmd commands to execute
|
|
# commands are executed in the order in which they appear
|
|
#HALCMD = save neta
|
|
|
|
# Single file that is executed after the GUI has started. Only supported by
|
|
# AXIS at this time (only AXIS creates a HAL component of its own)
|
|
#POSTGUI_HALFILE = test_postgui.hal
|
|
|
|
HALUI = halui
|
|
|
|
# Trajectory planner section --------------------------------------------------
|
|
|
|
[HALUI]
|
|
#No Content
|
|
|
|
[TRAJ]
|
|
|
|
|
|
AXES = 3
|
|
COORDINATES = X Y Z
|
|
HOME = 0 0 0
|
|
LINEAR_UNITS = mm
|
|
ANGULAR_UNITS = degree
|
|
DEFAULT_LINEAR_VELOCITY = 30.48
|
|
MAX_LINEAR_VELOCITY = 53.34
|
|
DEFAULT_ACCELERATION = 508
|
|
MAX_LINEAR_ACCELERATION = 508
|
|
POSITION_FILE = position_mm.txt
|
|
ARC_BLEND_ENABLE = 1
|
|
ARC_BLEND_FALLBACK_ENABLE = 1
|
|
ARC_BLEND_OPTIMIZATION_DEPTH = 50
|
|
#Use this setting for no smoothing (for debugging and stress-testing)
|
|
ARC_BLEND_SMOOTHING_THRESHOLD = .75
|
|
#Use this setting for "normal" smoothing, i.e. if we blend over more than 40% of a segment
|
|
#ARC_BLEND_SMOOTHING_THRESHOLD = 0.40
|
|
|
|
# Axes sections ---------------------------------------------------------------
|
|
|
|
[EMCIO]
|
|
# tool table file
|
|
TOOL_TABLE = tool.tbl
|
|
TOOL_CHANGE_POSITION = 0 0 0
|
|
|
|
|
|
[KINS]
|
|
KINEMATICS = trivkins
|
|
#This is a best-guess at the number of joints, it should be checked
|
|
JOINTS = 3
|
|
|
|
[AXIS_X]
|
|
MIN_LIMIT = -500.0
|
|
MAX_LIMIT = 500.0
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
|
|
[JOINT_0]
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
STEPGEN_MAXACCEL = 937.5
|
|
SCALE = 80.0
|
|
FERROR = 1
|
|
MIN_FERROR = .25
|
|
MIN_LIMIT = -500.0
|
|
MAX_LIMIT = 500.0
|
|
HOME_OFFSET = 0.0
|
|
|
|
[AXIS_Y]
|
|
MIN_LIMIT = -100.0
|
|
MAX_LIMIT = 100.0
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
|
|
[JOINT_1]
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
STEPGEN_MAXACCEL = 937.5
|
|
SCALE = 80.0
|
|
FERROR = 1
|
|
MIN_FERROR = .25
|
|
MIN_LIMIT = -100.0
|
|
MAX_LIMIT = 100.0
|
|
HOME_OFFSET = 0.0
|
|
|
|
[AXIS_Z]
|
|
MIN_LIMIT = -240.0
|
|
MAX_LIMIT = 0.001
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
|
|
[JOINT_2]
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 25.0
|
|
MAX_ACCELERATION = 750.0
|
|
STEPGEN_MAXACCEL = 937.5
|
|
SCALE = 80.0
|
|
FERROR = 1
|
|
MIN_FERROR = .25
|
|
MIN_LIMIT = -240.0
|
|
MAX_LIMIT = 0.001
|
|
HOME_OFFSET = 0.0
|
|
|
|
# section for main IO controller parameters -----------------------------------
|