Files
linuxcncAllWasm/configs/sim/axis/axis_mm_scurve.hal
2026-08-20 06:17:39 +08:00

18 lines
508 B
Plaintext

loadrt trivkins coordinates=XYZ
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=3 num_dio=10 num_aio=10 num_spindles=1
addf motion-command-handler servo-thread
addf motion-controller servo-thread
net x-pos-fb joint.0.motor-pos-fb <= joint.0.motor-pos-cmd
net y1-pos-fb joint.1.motor-pos-fb <= joint.1.motor-pos-cmd
net z-pos-fb joint.2.motor-pos-fb <= joint.2.motor-pos-cmd
setp iocontrol.0.emc-enable-in 1