38 lines
1.2 KiB
Plaintext
38 lines
1.2 KiB
Plaintext
# HAL config file for ServoToGo STG ISA board
|
|
#
|
|
# install driver, this should autodetect the board
|
|
# if that doesn't work, try using base=0xABC, where ABC matches your setup
|
|
# loadrt hal_stg base=0x200
|
|
loadrt hal_stg
|
|
|
|
# add functions to servo thread so they will be evaluated
|
|
# every servo period
|
|
# read inputs first
|
|
addf stg.capture-position servo-thread 1
|
|
# write outputs last
|
|
addf stg.write-dacs servo-thread -1
|
|
|
|
# connect position feedback signals to encoders
|
|
net Xpos-fb <= stg.0.position
|
|
net Ypos-fb <= stg.1.position
|
|
net Zpos-fb <= stg.2.position
|
|
|
|
# get feedback scaling from ini file
|
|
setp stg.0.position-scale [JOINT_0]INPUT_SCALE
|
|
setp stg.1.position-scale [JOINT_1]INPUT_SCALE
|
|
setp stg.2.position-scale [JOINT_2]INPUT_SCALE
|
|
|
|
# connect PID output signals to DACs
|
|
net Xoutput => stg.0.dac-value
|
|
net Youtput => stg.1.dac-value
|
|
net Zoutput => stg.2.dac-value
|
|
|
|
# set output scaling from ini file
|
|
setp stg.0.dac-gain [JOINT_0]OUTPUT_SCALE
|
|
setp stg.1.dac-gain [JOINT_1]OUTPUT_SCALE
|
|
setp stg.2.dac-gain [JOINT_2]OUTPUT_SCALE
|
|
# set output offset to zero
|
|
setp stg.0.dac-offset [JOINT_0]OUTPUT_OFFSET
|
|
setp stg.1.dac-offset [JOINT_1]OUTPUT_OFFSET
|
|
setp stg.2.dac-offset [JOINT_2]OUTPUT_OFFSET
|