32 lines
1.4 KiB
Plaintext
32 lines
1.4 KiB
Plaintext
net spindle-speed-limited => spindle.0.speed-out-rps => spindle.0.speed-in
|
|
|
|
# the unlink pin commands are only used, because they are connected
|
|
# in core_sim.hal and we use this file to simulate
|
|
unlinkp iocontrol.0.tool-change
|
|
unlinkp iocontrol.0.tool-changed
|
|
unlinkp iocontrol.0.tool-prep-number
|
|
|
|
net tool-change hal_manualtoolchange.change <= iocontrol.0.tool-change
|
|
net tool-changed hal_manualtoolchange.changed <= iocontrol.0.tool-changed
|
|
net tool-prep-number hal_manualtoolchange.number <= iocontrol.0.tool-prep-number
|
|
|
|
# external offset stuff
|
|
net eoffset_clear qtdragon.eoffset-clear => axis.z.eoffset-clear
|
|
net eoffset_count qtdragon.eoffset-spindle-count => axis.z.eoffset-counts
|
|
net eoffset qtdragon.eoffset-value <= axis.z.eoffset
|
|
#net limited qtdragon.led-limits-tripped <= motion.eoffset-limited
|
|
setp axis.z.eoffset-enable 1
|
|
setp axis.z.eoffset-scale 1.0
|
|
|
|
loadusr -Wn sim_panel qtvcp -a -o hide=groupBoxSelection -o hide=groupBoxControl -o rates=.001,.01,.1 sim_panel
|
|
net MPG sim_panel.MPG-s qtdragon.mpg-in
|
|
net MPG axis.x.jog-counts
|
|
net MPG axis.y.jog-counts
|
|
net MPG axis.z.jog-counts
|
|
|
|
net mpg-rate axis.x.jog-scale axis.y.jog-scale axis.z.jog-scale sim_panel.increments
|
|
|
|
net mpg-x qtdragon.axis_select_x-axis axis.x.jog-enable
|
|
net mpg-y qtdragon.axis_select_y-axis axis.y.jog-enable
|
|
net mpg-z qtdragon.axis_select_z-axis axis.z.jog-enable
|