296 lines
7.9 KiB
INI
296 lines
7.9 KiB
INI
# This config file was created 2017-02-05 00:32:40.919119 by the update_ini script
|
|
# The original config files may be found in the /home/chris/linuxcnc-mk/configs/sim/qtscreen/qtdefault.old directory
|
|
|
|
# EMC controller parameters for a simulated machine.
|
|
|
|
# General note: Comments can either be preceded with a # or ; - either is
|
|
# acceptable, although # is in keeping with most linux config files.
|
|
|
|
# General section -------------------------------------------------------------
|
|
[EMC]
|
|
|
|
|
|
# Version of this INI file
|
|
VERSION = 1.1
|
|
|
|
# Name of machine, for use with display, etc.
|
|
MACHINE = LinuxCNC-HAL-SIM-AXIS
|
|
|
|
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
|
#define EMC_DEBUG_CONFIG 0x00000002
|
|
#define EMC_DEBUG_VERSIONS 0x00000008
|
|
#define EMC_DEBUG_TASK_ISSUE 0x00000010
|
|
#define EMC_DEBUG_NML 0x00000040
|
|
#define EMC_DEBUG_MOTION_TIME 0x00000080
|
|
#define EMC_DEBUG_INTERP 0x00000100
|
|
#define EMC_DEBUG_RCS 0x00000200
|
|
#define EMC_DEBUG_INTERP_LIST 0x00000800
|
|
#define EMC_DEBUG_IOCONTROL 0x00001000
|
|
#define EMC_DEBUG_OWORD 0x00002000
|
|
#define EMC_DEBUG_REMAP 0x00004000
|
|
#define EMC_DEBUG_PYTHON 0x00008000
|
|
#define EMC_DEBUG_NAMEDPARAM 0x00010000
|
|
#define EMC_DEBUG_GDBONSIGNAL 0x00020000
|
|
#define EMC_DEBUG_PYTHON_TASK 0x00040000
|
|
#define EMC_DEBUG_ALL 0x7FFFFFFF /* it's an int for %i to work
|
|
|
|
DEBUG = 0x00002000
|
|
#DEBUG = 0
|
|
|
|
# Sections for display options ------------------------------------------------
|
|
[DISPLAY]
|
|
|
|
# Name of display program, e.g., xemc
|
|
DISPLAY = qtvcp -d
|
|
PREFERENCE_FILE_PATH = WORKINGFOLDER/qt_cnc.pref
|
|
# Cycle time, in seconds, that display will sleep between polls
|
|
CYCLE_TIME = 0.100
|
|
|
|
# Path to help file
|
|
HELP_FILE = doc/help.txt
|
|
|
|
# Initial display setting for position, RELATIVE or MACHINE
|
|
POSITION_OFFSET = RELATIVE
|
|
|
|
# Initial display setting for position, COMMANDED or ACTUAL
|
|
POSITION_FEEDBACK = ACTUAL
|
|
|
|
# Highest value that will be allowed for feed override, 1.0 = 100%
|
|
MAX_FEED_OVERRIDE = 2.0
|
|
|
|
DEFAULT_SPINDLE_0_SPEED = 200
|
|
SPINDLE_INCREMENT = 100
|
|
MIN_SPINDLE_0_SPEED = 300
|
|
MAX_SPINDLE_0_SPEED = 3000
|
|
MIN_SPINDLE_0_OVERRIDE = 0.5
|
|
MAX_SPINDLE_0_OVERRIDE = 1.5
|
|
|
|
MAX_LINEAR_VELOCITY = 1
|
|
DEFAULT_LINEAR_VELOCITY = .25
|
|
|
|
# Prefix to be used
|
|
PROGRAM_PREFIX = ../../nc_files/
|
|
|
|
# Introductory graphic
|
|
INTRO_GRAPHIC = linuxcnc.gif
|
|
INTRO_TIME = 5
|
|
|
|
#EDITOR = geany
|
|
TOOL_EDITOR = tooledit
|
|
|
|
INCREMENTS = 0.1 in, 0.01 in, 0.001 in, 0.0001 in, 1 mm, 0.1 mm, 0.01 mm
|
|
|
|
# set up 3 user popup message dialogs
|
|
MESSAGE_BOLDTEXT = NONE
|
|
MESSAGE_TEXT = This is a statusbar test
|
|
MESSAGE_DETAILS = STATUS DETAILS
|
|
MESSAGE_TYPE = status
|
|
MESSAGE_PINNAME = statustest
|
|
|
|
MESSAGE_BOLDTEXT = NONE
|
|
MESSAGE_TEXT = This is a yes no dialog test
|
|
MESSAGE_DETAILS = Y/N DETAILS
|
|
MESSAGE_TYPE = yesnodialog
|
|
MESSAGE_PINNAME = yndialogtest
|
|
|
|
MESSAGE_BOLDTEXT = This is the short text
|
|
MESSAGE_TEXT = This is the longer text of the both type test. It can be longer then the status bar text
|
|
MESSAGE_DETAILS = BOTH DETAILS
|
|
MESSAGE_TYPE = okdialog status
|
|
MESSAGE_PINNAME = bothtest
|
|
|
|
[MDI_COMMAND_LIST]
|
|
MDI_COMMAND = G0 X0Y0Z0
|
|
MDI_COMMAND = G0 X1Y1Z1
|
|
|
|
[FILTER]
|
|
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
|
|
PROGRAM_EXTENSION = .py Python Script
|
|
|
|
png = image-to-gcode
|
|
gif = image-to-gcode
|
|
jpg = image-to-gcode
|
|
py = python
|
|
|
|
# Task controller section -----------------------------------------------------
|
|
|
|
[RS274NGC]
|
|
|
|
# File containing interpreter variables
|
|
PARAMETER_FILE = sim.var
|
|
SUBROUTINE_PATH = ~/linuxcnc/nc_files/macros/lathe:~/linuxcnc/nc_files/macros/probe::~/linuxcnc/nc_files/examples/macros/mill
|
|
# Motion control section ------------------------------------------------------
|
|
|
|
[EMCMOT]
|
|
|
|
EMCMOT = motmod
|
|
|
|
# Timeout for comm to emcmot, in seconds
|
|
COMM_TIMEOUT = 1.0
|
|
|
|
# Interval between tries to emcmot, in seconds
|
|
COMM_WAIT = 0.010
|
|
|
|
# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
|
|
BASE_PERIOD = 0
|
|
# Servo task period, in nano-seconds
|
|
SERVO_PERIOD = 1000000
|
|
|
|
# Hardware Abstraction Layer section --------------------------------------------------
|
|
|
|
[TASK]
|
|
|
|
# Name of task controller program, e.g., milltask
|
|
TASK = milltask
|
|
|
|
# Cycle time, in seconds, that task controller will sleep between polls
|
|
CYCLE_TIME = 0.001
|
|
|
|
# Part program interpreter section --------------------------------------------
|
|
|
|
[HAL]
|
|
|
|
# The run script first uses halcmd to execute any HALFILE
|
|
# files, and then to execute any individual HALCMD commands.
|
|
#
|
|
|
|
# list of hal config files to run through halcmd
|
|
# files are executed in the order in which they appear
|
|
HALFILE = core_sim.hal
|
|
HALFILE = sim_spindle_encoder.hal
|
|
#HALFILE = axis_manualtoolchange.hal
|
|
HALFILE = simulated_home.hal
|
|
HALFILE = check_constraints.hal
|
|
|
|
# list of halcmd commands to execute
|
|
# commands are executed in the order in which they appear
|
|
#HALCMD = save neta
|
|
|
|
# Single file that is executed after the GUI has started. Only supported by
|
|
# AXIS at this time (only AXIS creates a HAL component of its own)
|
|
POSTGUI_HALFILE = qtvcp_postgui.hal
|
|
|
|
HALUI = halui
|
|
|
|
# Trajectory planner section --------------------------------------------------
|
|
|
|
[HALUI]
|
|
#No Content
|
|
[TRAJ]
|
|
|
|
|
|
AXES = 3
|
|
COORDINATES = X Y Z
|
|
HOME = 0 0 0
|
|
LINEAR_UNITS = inch
|
|
ANGULAR_UNITS = degree
|
|
CYCLE_TIME = 0.010
|
|
DEFAULT_LINEAR_VELOCITY = 5
|
|
POSITION_FILE = position.txt
|
|
MAX_LINEAR_VELOCITY = 5
|
|
|
|
# Axes sections ---------------------------------------------------------------
|
|
|
|
# First axis
|
|
[EMCIO]
|
|
# tool table file
|
|
TOOL_TABLE = ../sim.tbl
|
|
TOOL_CHANGE_POSITION = 0 0 0
|
|
TOOL_CHANGE_QUILL_UP = 1
|
|
|
|
|
|
[KINS]
|
|
KINEMATICS = trivkins
|
|
#This is a best-guess at the number of joints, it should be checked
|
|
JOINTS = 3
|
|
|
|
[AXIS_X]
|
|
MIN_LIMIT = -40.0
|
|
MAX_LIMIT = 40.0
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
|
|
[JOINT_0]
|
|
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = 4000
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -40.0
|
|
MAX_LIMIT = 40.0
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 20.0
|
|
HOME_LATCH_VEL = 20.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
HOME_SEQUENCE = 1
|
|
|
|
# Second axis
|
|
[AXIS_Y]
|
|
MIN_LIMIT = -40.0
|
|
MAX_LIMIT = 40.0
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
|
|
[JOINT_1]
|
|
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = 4000
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -40.0
|
|
MAX_LIMIT = 40.0
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 20.0
|
|
HOME_LATCH_VEL = 20.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
HOME_SEQUENCE = 1
|
|
|
|
# Third axis
|
|
[AXIS_Z]
|
|
MIN_LIMIT = -8.0
|
|
MAX_LIMIT = 0.12
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
|
|
[JOINT_2]
|
|
|
|
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = 5
|
|
MAX_ACCELERATION = 50.0
|
|
BACKLASH = 0.000
|
|
INPUT_SCALE = 4000
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -8.0
|
|
|
|
# Normally the Z max should be 0.000!
|
|
# The only reason it's greater than 0 here is so that the splash screen
|
|
# gcode will run.
|
|
MAX_LIMIT = 0.12
|
|
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 1.0
|
|
HOME_SEARCH_VEL = 20.0
|
|
HOME_LATCH_VEL = 20.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
HOME_SEQUENCE = 0
|
|
|
|
# section for main IO controller parameters
|