196 lines
6.2 KiB
INI
196 lines
6.2 KiB
INI
# EMC controller parameters for generic controller. Make these what you need
|
|
# for your system.
|
|
# General note: Comments can either be preceded with a # or ; - either is
|
|
# acceptable, although # is in keeping with most linux config files.
|
|
# Settings with a + at the front of the comment are likely needed to get
|
|
# changed by the user.
|
|
# Settings with a - at the front are highly unneeded to be changed
|
|
###############################################################################
|
|
# General section
|
|
###############################################################################
|
|
|
|
[EMC]
|
|
#- Version of this INI file
|
|
VERSION = 1.1
|
|
#+ Name of machine, for use with display, etc.
|
|
MACHINE = LinuxCNC-HAL-STEP-PLUTO
|
|
#+ Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
|
DEBUG = 0
|
|
# DEBUG = 0x00000007
|
|
# DEBUG = 0x7FFFFFFF
|
|
###############################################################################
|
|
# Sections for display options
|
|
###############################################################################
|
|
|
|
[DISPLAY]
|
|
DISPLAY = axis
|
|
# Cycle time, in seconds, that display will sleep between polls
|
|
CYCLE_TIME = 0.200
|
|
#- Path to help file
|
|
HELP_FILE = doc/help.txt
|
|
#- Initial display setting for position, RELATIVE or MACHINE
|
|
POSITION_OFFSET = RELATIVE
|
|
#- Initial display setting for position, COMMANDED or ACTUAL
|
|
POSITION_FEEDBACK = ACTUAL
|
|
#+ Highest value that will be allowed for feed override, 1.0 = 100%
|
|
MAX_FEED_OVERRIDE = 1.2
|
|
#- Prefix to be used
|
|
PROGRAM_PREFIX = ../../nc_files/
|
|
#- Introductory graphic
|
|
INTRO_GRAPHIC = linuxcnc.gif
|
|
INTRO_TIME = 5
|
|
# Editor to be used with Axis
|
|
#EDITOR = geany
|
|
###############################################################################
|
|
# Task controller section
|
|
###############################################################################
|
|
|
|
[FILTER]
|
|
#No Content
|
|
|
|
[RS274NGC]
|
|
#- File containing interpreter variables
|
|
PARAMETER_FILE = stepper.var
|
|
###############################################################################
|
|
# Motion control section
|
|
###############################################################################
|
|
|
|
[EMCMOT]
|
|
#- Name of the motion controller to use (only one exists for nontrivkins)
|
|
EMCMOT = motmod
|
|
#- Timeout for comm to emcmot, in seconds
|
|
COMM_TIMEOUT = 1.0
|
|
#- Servo task period, in nanosecs
|
|
SERVO_PERIOD = 1000000
|
|
###############################################################################
|
|
# Hardware Abstraction Layer section
|
|
###############################################################################
|
|
|
|
[TASK]
|
|
# Name of task controller program, e.g., milltask
|
|
TASK = milltask
|
|
#- Cycle time, in seconds, that task controller will sleep between polls
|
|
CYCLE_TIME = 0.010
|
|
###############################################################################
|
|
# Part program interpreter section
|
|
###############################################################################
|
|
|
|
[HAL]
|
|
# The run script first uses halcmd to execute any HALFILE
|
|
# files, and then to execute any individual HALCMD commands.
|
|
#
|
|
# list of hal config files to run through halcmd
|
|
#+ files are executed in the order in which they appear
|
|
HALFILE = pluto_pinout.hal
|
|
HALFILE =
|
|
#- list of halcmd commands to execute
|
|
# commands are executed in the order in which they appear
|
|
#HALCMD = save neta
|
|
###############################################################################
|
|
# Trajectory planner section
|
|
###############################################################################
|
|
|
|
[HALUI]
|
|
#No Content
|
|
|
|
[TRAJ]
|
|
#+ machine specific settings
|
|
# COORDINATES = X Y Z A B C
|
|
COORDINATES = X Y Z
|
|
HOME = 0 0 0
|
|
LINEAR_UNITS = inch
|
|
ANGULAR_UNITS = degree
|
|
DEFAULT_LINEAR_VELOCITY = 1.2
|
|
MAX_LINEAR_VELOCITY = 1.2
|
|
DEFAULT_LINEAR_ACCELERATION = 15.0
|
|
MAX_LINEAR_ACCELERATION = 20.0
|
|
###############################################################################
|
|
# Axes sections
|
|
###############################################################################
|
|
#+ First axis
|
|
|
|
[EMCIO]
|
|
#- tool table file
|
|
TOOL_TABLE = stepper.tbl
|
|
|
|
[KINS]
|
|
KINEMATICS = trivkins
|
|
JOINTS = 3
|
|
|
|
[AXIS_X]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = .5667
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_0]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = .5667
|
|
MAX_ACCELERATION = 20.0
|
|
BACKLASH = 0.000
|
|
SCALE = 6400
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
#+ Second axis
|
|
|
|
[AXIS_Y]
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
MAX_VELOCITY = .5667
|
|
MAX_ACCELERATION = 20.0
|
|
|
|
[JOINT_1]
|
|
TYPE = LINEAR
|
|
HOME = 0.000
|
|
MAX_VELOCITY = .5667
|
|
MAX_ACCELERATION = 20.0
|
|
BACKLASH = 0.000
|
|
SCALE = 6400
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -10.0
|
|
MAX_LIMIT = 10.0
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
#+ Third axis
|
|
|
|
[AXIS_Z]
|
|
MIN_LIMIT = -2.0
|
|
MAX_LIMIT = 4.0
|
|
MAX_VELOCITY = .3667
|
|
MAX_ACCELERATION = 15.0
|
|
|
|
[JOINT_2]
|
|
TYPE = LINEAR
|
|
HOME = 0.0
|
|
MAX_VELOCITY = .3667
|
|
MAX_ACCELERATION = 15.0
|
|
BACKLASH = 0.000
|
|
SCALE = 8000
|
|
OUTPUT_SCALE = 1.000
|
|
MIN_LIMIT = -2.0
|
|
MAX_LIMIT = 4.0
|
|
FERROR = 0.050
|
|
MIN_FERROR = 0.010
|
|
HOME_OFFSET = 0.0
|
|
HOME_SEARCH_VEL = 0.0
|
|
HOME_LATCH_VEL = 0.0
|
|
HOME_USE_INDEX = NO
|
|
HOME_IGNORE_LIMITS = NO
|
|
###############################################################################
|
|
# section for main IO controller parameters
|
|
###############################################################################
|