40 lines
1.1 KiB
Plaintext
40 lines
1.1 KiB
Plaintext
# standard pinout config file for 3-axis steppers
|
|
# using a parport for I/O
|
|
#
|
|
# first load the parport driver
|
|
loadrt hal_parport cfg="0x0378"
|
|
#
|
|
# next connect the parport functions to threads
|
|
# read inputs first
|
|
addf parport.0.read base-thread 1
|
|
# write outputs last
|
|
addf parport.0.write base-thread -1
|
|
#
|
|
# finally connect physical pins to the signals
|
|
net Xstep parport.0.pin-03-out
|
|
net Xdir parport.0.pin-02-out
|
|
net Ystep parport.0.pin-05-out
|
|
net Ydir parport.0.pin-04-out
|
|
net Zstep parport.0.pin-07-out
|
|
net Zdir parport.0.pin-06-out
|
|
net Astep parport.0.pin-09-out
|
|
net Adir parport.0.pin-08-out
|
|
|
|
|
|
# create a signal for the estop loopback
|
|
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
|
|
|
|
# create signals for tool loading loopback
|
|
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
|
|
net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
|
|
|
|
# create a signal for "spindle on"
|
|
|
|
# commented out till we resolve this issue
|
|
# connect it to the iocontroller
|
|
net spindle_on spindle.0.on
|
|
# connect it to a physical pin
|
|
net spindle_on parport.0.pin-01-out
|
|
|
|
|