Import LinuxCNC source tree

tests/remap/fail/body-ngc/README

@@ -0,0 +1 @@
+Exercise failed remap NGC procedure - must properly return to top level

tests/remap/fail/body-ngc/expected

@@ -0,0 +1,20 @@
+executing
+    1 N..... USE_LENGTH_UNITS(CANON_UNITS_MM)
+    2 N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+    3 N..... SET_G92_OFFSET(0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+    4 N..... SET_XY_ROTATION(0.0000)
+    5 N..... SET_FEED_REFERENCE(CANON_XYZ)
+    6 N..... ON_RESET()
+    7 N..... MESSAGE(" before M400: call_level= 0.000000 remap_level=0.000000")
+    8 N..... MESSAGE(" in rm400: call_level= 1.000000 remap_level=1.000000")
+Attempt to divide by zero
+#100 = [1/0]
+    9 N..... MESSAGE(" after failed M400: call_level= 0.000000 remap_level=0.000000")
+   10 N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+   11 N..... SET_XY_ROTATION(0.0000)
+   12 N..... SET_FEED_MODE(0, 0)
+   13 N..... SET_FEED_RATE(0.0000)
+   14 N..... STOP_SPINDLE_TURNING(0)
+   15 N..... SET_SPINDLE_MODE(0 0.0000)
+   16 N..... PROGRAM_END()
+   17 N..... ON_RESET()

tests/remap/fail/body-ngc/rm400.ngc

@@ -0,0 +1,6 @@
+o<rm400> sub
+(debug, in rm400: call_level= #<_call_level> remap_level=#<_remap_level>)
+#100 = [1/0]
+o<rm400> endsub
+m2
+%

tests/remap/fail/body-ngc/test.ini

@@ -0,0 +1,9 @@
+[EMC]
+DEBUG=0
+LOG_LEVEL=0
+
+[RS274NGC]
+SUBROUTINE_PATH = .
+
+REMAP=M400  modalgroup=5  ngc=rm400
+

tests/remap/fail/body-ngc/test.ngc

@@ -0,0 +1,4 @@
+(debug, before M400: call_level= #<_call_level> remap_level=#<_remap_level>)
+M400
+(debug, after failed M400: call_level= #<_call_level> remap_level=#<_remap_level>)
+M2

tests/remap/fail/body-ngc/test.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+rs274 -i test.ini -n 0 -g test.ngc 2>&1
+exit "${PIPESTATUS[0]}"