Import LinuxCNC source tree

tests/motion-logger/basic/.gitignore

@@ -0,0 +1,5 @@
+result.*
+sim.var*
+out.motion-logger
+expected.builtin-startup
+

tests/motion-logger/basic/README

@@ -0,0 +1,14 @@
+
+This directory uses the "motion-logger" test program to log the Motion
+commands that come out of Task, as a result of running various ngc
+G-code files.
+
+Each test consists of a file named "$TEST.ngc" and a matching file named
+"expected.$TEST".  The $TEST.ngc file is run, and the resulting Motion
+commands are logged to a file named "result.$TEST".  If there is any
+discrepancy, the test fails.
+
+In between running each .ngc file, a special file named "reset.ngc"
+is run, intending to restore Task, Interp, and the Canon interface to
+their default startup state, to be ready to run the next .ngc file.
+

tests/motion-logger/basic/checkresult

@@ -0,0 +1,4 @@
+#!/bin/sh
+# Success or failure of this test is handled in the test.sh script, if we
+# get this far it's a success.
+exit 0

tests/motion-logger/basic/expected.builtin-startup.in

@@ -0,0 +1,227 @@
+SET_NUM_JOINTS 9
+SET_NUM_SPINDLES 1
+SET_VEL vel=0, ini_maxvel=1.2
+SET_VEL_LIMIT vel=4
+SET_ACC acc=1e+99
+SET_JERK jerk=1e+09
+SET_PLANNER_TYPE planner_type=0
+SET_SCURVE_PEAK_SCALE scale=1
+SETUP_ARC_BLENDS
+SET_MAX_FEED_OVERRIDE 1
+SETUP_SET_PROBE_ERR_INHIBIT 0 0
+SET_WORLD_HOME x=0, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0
+SET_JOINT_BACKLASH joint=0, backlash=0
+SET_JOINT_POSITION_LIMITS joint=0, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=0, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=0, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=0, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=0, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=0, vel=4
+SET_JOINT_ACC_LIMIT joint=0, acc=1000
+SET_JOINT_JERK_LIMIT joint=0, jerk=0
+JOINT_ACTIVATE joint=0
+SET_JOINT_BACKLASH joint=1, backlash=0
+SET_JOINT_POSITION_LIMITS joint=1, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=1, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=1, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=1, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=1, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=1, vel=4
+SET_JOINT_ACC_LIMIT joint=1, acc=1000
+SET_JOINT_JERK_LIMIT joint=1, jerk=0
+JOINT_ACTIVATE joint=1
+SET_JOINT_BACKLASH joint=2, backlash=0
+SET_JOINT_POSITION_LIMITS joint=2, min=-4, max=0
+SET_JOINT_POSITION_LIMITS joint=2, min=-4, max=4
+SET_JOINT_MAX_FERROR joint=2, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=2, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=2, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=2, vel=4
+SET_JOINT_ACC_LIMIT joint=2, acc=1000
+SET_JOINT_JERK_LIMIT joint=2, jerk=0
+JOINT_ACTIVATE joint=2
+SET_JOINT_BACKLASH joint=3, backlash=0
+SET_JOINT_POSITION_LIMITS joint=3, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=3, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=3, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=3, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=3, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=3, vel=4
+SET_JOINT_ACC_LIMIT joint=3, acc=1000
+SET_JOINT_JERK_LIMIT joint=3, jerk=0
+JOINT_ACTIVATE joint=3
+SET_JOINT_BACKLASH joint=4, backlash=0
+SET_JOINT_POSITION_LIMITS joint=4, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=4, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=4, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=4, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=4, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=4, vel=4
+SET_JOINT_ACC_LIMIT joint=4, acc=1000
+SET_JOINT_JERK_LIMIT joint=4, jerk=0
+JOINT_ACTIVATE joint=4
+SET_JOINT_BACKLASH joint=5, backlash=0
+SET_JOINT_POSITION_LIMITS joint=5, min=-4, max=0
+SET_JOINT_POSITION_LIMITS joint=5, min=-4, max=4
+SET_JOINT_MAX_FERROR joint=5, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=5, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=5, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=5, vel=4
+SET_JOINT_ACC_LIMIT joint=5, acc=1000
+SET_JOINT_JERK_LIMIT joint=5, jerk=0
+JOINT_ACTIVATE joint=5
+SET_JOINT_BACKLASH joint=6, backlash=0
+SET_JOINT_POSITION_LIMITS joint=6, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=6, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=6, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=6, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=6, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=6, vel=4
+SET_JOINT_ACC_LIMIT joint=6, acc=1000
+SET_JOINT_JERK_LIMIT joint=6, jerk=0
+JOINT_ACTIVATE joint=6
+SET_JOINT_BACKLASH joint=7, backlash=0
+SET_JOINT_POSITION_LIMITS joint=7, min=-40, max=0
+SET_JOINT_POSITION_LIMITS joint=7, min=-40, max=40
+SET_JOINT_MAX_FERROR joint=7, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=7, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=7, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=7, vel=4
+SET_JOINT_ACC_LIMIT joint=7, acc=1000
+SET_JOINT_JERK_LIMIT joint=7, jerk=0
+JOINT_ACTIVATE joint=7
+SET_JOINT_BACKLASH joint=8, backlash=0
+SET_JOINT_POSITION_LIMITS joint=8, min=-4, max=0
+SET_JOINT_POSITION_LIMITS joint=8, min=-4, max=4
+SET_JOINT_MAX_FERROR joint=8, maxFerror=0.05
+SET_JOINT_MIN_FERROR joint=8, minFerror=0.01
+SET_JOINT_HOMING_PARAMS joint=8, offset=0 home=0, final_vel=-1, search_vel=0, latch_vel=0, flags=0x00000000, sequence=999, volatile=0
+SET_JOINT_VEL_LIMIT joint=8, vel=4
+SET_JOINT_ACC_LIMIT joint=8, acc=1000
+SET_JOINT_JERK_LIMIT joint=8, jerk=0
+JOINT_ACTIVATE joint=8
+SET_AXIS_POSITION_LIMITS axis=0, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=0, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=0 vel=4
+SET_AXIS_ACC_LIMIT axis=0, acc=1000
+SET_AXIS_LOCKING_JOINT axis=0, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=0, jerk=0
+SET_AXIS_POSITION_LIMITS axis=1, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=1, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=1 vel=4
+SET_AXIS_ACC_LIMIT axis=1, acc=1000
+SET_AXIS_LOCKING_JOINT axis=1, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=1, jerk=0
+SET_AXIS_POSITION_LIMITS axis=2, min=-4, max=0
+SET_AXIS_POSITION_LIMITS axis=2, min=-4, max=4
+SET_AXIS_VEL_LIMIT axis=2 vel=4
+SET_AXIS_ACC_LIMIT axis=2, acc=1000
+SET_AXIS_LOCKING_JOINT axis=2, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=2, jerk=0
+SET_AXIS_POSITION_LIMITS axis=3, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=3, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=3 vel=4
+SET_AXIS_ACC_LIMIT axis=3, acc=1000
+SET_AXIS_LOCKING_JOINT axis=3, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=3, jerk=0
+SET_AXIS_POSITION_LIMITS axis=4, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=4, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=4 vel=4
+SET_AXIS_ACC_LIMIT axis=4, acc=1000
+SET_AXIS_LOCKING_JOINT axis=4, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=4, jerk=0
+SET_AXIS_POSITION_LIMITS axis=5, min=-4, max=0
+SET_AXIS_POSITION_LIMITS axis=5, min=-4, max=4
+SET_AXIS_VEL_LIMIT axis=5 vel=4
+SET_AXIS_ACC_LIMIT axis=5, acc=1000
+SET_AXIS_LOCKING_JOINT axis=5, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=5, jerk=0
+SET_AXIS_POSITION_LIMITS axis=6, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=6, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=6 vel=4
+SET_AXIS_ACC_LIMIT axis=6, acc=1000
+SET_AXIS_LOCKING_JOINT axis=6, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=6, jerk=0
+SET_AXIS_POSITION_LIMITS axis=7, min=-40, max=0
+SET_AXIS_POSITION_LIMITS axis=7, min=-40, max=40
+SET_AXIS_VEL_LIMIT axis=7 vel=4
+SET_AXIS_ACC_LIMIT axis=7, acc=1000
+SET_AXIS_LOCKING_JOINT axis=7, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=7, jerk=0
+SET_AXIS_POSITION_LIMITS axis=8, min=-4, max=0
+SET_AXIS_POSITION_LIMITS axis=8, min=-4, max=4
+SET_AXIS_VEL_LIMIT axis=8 vel=4
+SET_AXIS_ACC_LIMIT axis=8, acc=1000
+SET_AXIS_LOCKING_JOINT axis=8, locking_joint=-1
+SET_AXIS_JERK_LIMIT axis=8, jerk=0
+SET_SPINDLE_PARAMS, 1.00e+99, 0.00e+00, -1.00e+99, 0.00e+00
+JOG_ABORT joint=0
+JOG_ABORT joint=1
+JOG_ABORT joint=2
+JOG_ABORT joint=3
+JOG_ABORT joint=4
+JOG_ABORT joint=5
+JOG_ABORT joint=6
+JOG_ABORT joint=7
+JOG_ABORT joint=8
+JOG_ABORT joint=9
+JOG_ABORT joint=10
+JOG_ABORT joint=11
+JOG_ABORT joint=12
+JOG_ABORT joint=13
+JOG_ABORT joint=14
+JOG_ABORT joint=15
+ABORT
+SPINDLE_OFF
+DISABLE
+JOINT_UNHOME joint=-2
+FREE
+JOG_ABORT joint=0
+JOG_ABORT joint=1
+JOG_ABORT joint=2
+JOG_ABORT joint=3
+JOG_ABORT joint=4
+JOG_ABORT joint=5
+JOG_ABORT joint=6
+JOG_ABORT joint=7
+JOG_ABORT joint=8
+JOG_ABORT joint=9
+JOG_ABORT joint=10
+JOG_ABORT joint=11
+JOG_ABORT joint=12
+JOG_ABORT joint=13
+JOG_ABORT joint=14
+JOG_ABORT joint=15
+ABORT
+SPINDLE_OFF
+
+#
+# The test UI then sends an NML command to move Task to the On state, which
+# turns on Motion and all the amps.
+#
+
+ENABLE
+
+#
+# The test UI finally switches mode to Auto, which switches Motion to Coord
+# and aborts.
+#
+
+COORD
+JOG_ABORT joint=0
+JOG_ABORT joint=1
+JOG_ABORT joint=2
+JOG_ABORT joint=3
+JOG_ABORT joint=4
+JOG_ABORT joint=5
+JOG_ABORT joint=6
+JOG_ABORT joint=7
+JOG_ABORT joint=8
+JOG_ABORT joint=9
+JOG_ABORT joint=10
+JOG_ABORT joint=11
+JOG_ABORT joint=12
+JOG_ABORT joint=13
+JOG_ABORT joint=14
+JOG_ABORT joint=15
+ABORT

tests/motion-logger/basic/expected.g0

@@ -0,0 +1,4 @@
+SET_LINE x=1, y=2, z=3, a=4, b=5, c=6, u=7, v=8, w=9, id=2, motion_type=1, vel=1.66296, ini_maxvel=1.66296, acc=415.74, turn=-1
+SET_LINE x=0.1, y=0.2, z=0.3, a=0.4, b=0.5, c=0.6, u=0.7, v=0.8, w=0.9, id=4, motion_type=1, vel=1.66296, ini_maxvel=1.66296, acc=415.74, turn=-1
+SET_SPINDLESYNC sync=0.000000, flags=0x00000000
+SPINDLE_OFF

tests/motion-logger/basic/expected.g1

@@ -0,0 +1,5 @@
+SET_LINE x=1, y=2, z=3, a=4, b=5, c=6, u=7, v=8, w=9, id=2, motion_type=2, vel=0.0166667, ini_maxvel=1.66296, acc=415.74, turn=-1
+SET_LINE x=0.1, y=2, z=0.3, a=0.4, b=5, c=0.6, u=0.7, v=8, w=0.9, id=3, motion_type=2, vel=0.0333333, ini_maxvel=1.40546, acc=351.364, turn=-1
+SET_LINE x=10, y=2, z=0.3, a=10, b=5, c=0.6, u=10, v=8, w=0.9, id=5, motion_type=2, vel=0.00166667, ini_maxvel=4, acc=1000, turn=-1
+SET_SPINDLESYNC sync=0.000000, flags=0x00000000
+SPINDLE_OFF

tests/motion-logger/basic/expected.reset

@@ -0,0 +1,3 @@
+SET_OFFSET x=0, y=0, z=0, a=0, b=0, c=0 u=0, v=0, w=0
+SET_SPINDLESYNC sync=0.000000, flags=0x00000000
+SPINDLE_OFF

tests/motion-logger/basic/expected.s

@@ -0,0 +1,15 @@
+SET_LINE x=1, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=2, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SPINDLE_ON speed=0.000000, css_factor=0.000000, xoffset=0.000000
+SET_LINE x=1.5, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=6, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SPINDLE_ON speed=0.000000, css_factor=0.000000, xoffset=0.000000
+SET_LINE x=2, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=10, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SPINDLE_ON speed=234.000000, css_factor=0.000000, xoffset=0.000000
+SET_LINE x=3, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=14, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SPINDLE_ON speed=321.000000, css_factor=0.000000, xoffset=0.000000
+SPINDLE_ON speed=432.000000, css_factor=0.000000, xoffset=0.000000
+SET_LINE x=4, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=19, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SPINDLE_OFF
+SPINDLE_ON speed=0.000000, css_factor=0.000000, xoffset=0.000000
+SET_LINE x=5, y=0, z=0, a=0, b=0, c=0, u=0, v=0, w=0, id=26, motion_type=1, vel=4, ini_maxvel=4, acc=1000, turn=-1
+SET_SPINDLESYNC sync=0.000000, flags=0x00000000
+SPINDLE_OFF

tests/motion-logger/basic/g0.ngc

@@ -0,0 +1,5 @@
+f5
+g0 x1 y2 z3 a4 b5 c6 u7 v8 w9
+f0.001
+g0 x0.1 y0.2 z0.3 a0.4 b0.5 c0.6 u0.7 v0.8 w0.9
+m2

tests/motion-logger/basic/g1.ngc

@@ -0,0 +1,6 @@
+f1
+g1 x1 y2 z3 a4 b5 c6 u7 v8 w9
+f2 g1 x0.1 z0.3 a0.4 c0.6 u0.7 w0.9
+f0.1
+g1 x10 a10 u10
+m2

tests/motion-logger/basic/mock-motion.hal

@@ -0,0 +1,3 @@
+loadusr -W motion-logger out.motion-logger
+setp iocontrol.0.emc-enable-in 1
+

tests/motion-logger/basic/reset.ngc

@@ -0,0 +1,17 @@
+
+;
+; This gcode program is intended to reset Task (including Canon) to a
+; sane, simple default analogous to system startup.
+;
+
+G90                                     ; absolute distance mode
+G91.1                                   ; arc centers are relative
+G40                                     ; cutter radius compensation off
+G53 G0 X0 Y0 Z0 A0 B0 C0 U0 V0 W0       ; move to machine home
+G92.1                                   ; clear G92 offsets
+G54                                     ; switch to coordinate system G54
+G10 L2 P1 X0 Y0 Z0 A0 B0 C0 U0 V0 W0 R0 ; set G54 to equal G53
+G49                                     ; disable tool offset compensation
+G80                                     ; cancel canned cycle
+
+M2

tests/motion-logger/basic/s.ngc

@@ -0,0 +1,27 @@
+; the G0 commands here are just to see the sequencing of commands coming out of task
+g0 x1
+; this will update the spindle speed via SPINDLE_ON with state False
+s123
+
+g0 x1.5
+; this will update the spindle speed via another SPINDLE_ON with state False
+s234
+
+g0 x2
+; this M3 will result in the SPINDLE_ON sent to Motion with state True
+m3
+
+g0 x3
+; this will update the spindle speed via another SPINDLE_ON with state True
+s321
+s432
+
+g0 x4
+; this will update the spindle via SPINDLE_OFF
+m5
+
+; this will update the spindle speed via SPINDLE_ON with state False
+s1234
+
+g0 x5
+m2

tests/motion-logger/basic/test-ui.py

@@ -0,0 +1,82 @@
+#!/usr/bin/env python3
+
+import linuxcnc
+import hal
+
+import time
+import sys
+import subprocess
+import os
+import signal
+import glob
+import re
+
+comp = hal.component("test-ui")
+comp.newpin("reopen-log", hal.HAL_BIT, hal.HAL_IO)
+comp.ready()
+
+os.system("halcmd net reopen-log test-ui.reopen-log motion-logger.reopen-log")
+
+# This will be the return value of this program.
+# Any failure sets it to 1.
+retval = 0
+
+
+def end_log(logfile_name):
+    c.wait_complete()
+    comp['reopen-log'] = True
+    while comp['reopen-log']: time.sleep(.01)
+    os.rename("out.motion-logger", 'result.%s' % logfile_name)
+    status = subprocess.call(['diff', '-u', 'expected.%s' % logfile_name, 'result.%s' % logfile_name], shell=False)
+    if status == 0:
+        print("sub-test %s ok" % logfile_name)
+    else:
+        print("unexpected output in logfile '%s'" % logfile_name)
+        global retval
+        retval = 1
+    sys.stdout.flush()
+
+
+#
+# connect to LinuxCNC
+#
+
+c = linuxcnc.command()
+s = linuxcnc.stat()
+e = linuxcnc.error_channel()
+
+
+#
+# Come out of E-stop, turn the machine on, and switch to Auto mode.
+#
+
+c.state(linuxcnc.STATE_ESTOP_RESET)
+c.state(linuxcnc.STATE_ON)
+c.mode(linuxcnc.MODE_AUTO)
+
+end_log('builtin-startup')
+
+
+#
+# run each .ngc test file in the test directory
+#
+
+for ngc in glob.glob('*.ngc'):
+    if ngc == 'reset.ngc': continue
+
+    m = re.match('(.*)\\.ngc', ngc)
+    basename = m.group(1)
+
+    c.program_open('reset.ngc')
+    c.auto(linuxcnc.AUTO_RUN, 0)
+    c.wait_complete()
+    end_log('reset')
+
+    c.program_open(ngc)
+    c.auto(linuxcnc.AUTO_RUN, 0)
+    c.wait_complete()
+    end_log(basename)
+
+
+sys.stderr.write("trying to exit")
+sys.exit(retval)

tests/motion-logger/basic/test.ini

@@ -0,0 +1,213 @@
+[EMC]
+VERSION = 1.1
+DEBUG = 0x0
+
+[DISPLAY]
+DISPLAY = ./test-ui.py
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.001
+
+[RS274NGC]
+PARAMETER_FILE = sim.var
+
+[EMCMOT]
+#EMCMOT = motmod
+COMM_TIMEOUT = 4.0
+BASE_PERIOD = 0
+SERVO_PERIOD = 1000000
+
+[EMCIO]
+TOOL_TABLE = simpockets.tbl
+TOOL_CHANGE_QUILL_UP = 1
+RANDOM_TOOLCHANGER = 0
+
+[HAL]
+HALFILE = mock-motion.hal
+#POSTGUI_HALFILE = postgui.hal
+
+[TRAJ]
+NO_FORCE_HOMING =       1
+COORDINATES =           X Y Z A B C U V W
+HOME =                  0 0 0 0 0 0 0 0 0
+LINEAR_UNITS =          inch
+ANGULAR_UNITS =         degree
+DEFAULT_LINEAR_VELOCITY = 1.2
+MAX_LINEAR_VELOCITY =   4
+
+[KINS]
+KINEMATICS = trivkins
+JOINTS = 9
+
+[AXIS_X]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_0]
+TYPE =             LINEAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_Y]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_1]
+TYPE =             LINEAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_Z]
+MIN_LIMIT = -4.0
+MAX_LIMIT = 4.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_2]
+TYPE =             LINEAR
+HOME =             0.0
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -4.0
+MAX_LIMIT =        4.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_A]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_3]
+TYPE =             ANGULAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_B]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_4]
+TYPE =             ANGULAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_C]
+MIN_LIMIT = -4.0
+MAX_LIMIT = 4.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_5]
+TYPE =             ANGULAR
+HOME =             0.0
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -4.0
+MAX_LIMIT =        4.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_U]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_6]
+TYPE =             LINEAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_V]
+MIN_LIMIT = -40.0
+MAX_LIMIT = 40.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_7]
+TYPE =             LINEAR
+HOME =             0.000
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -40.0
+MAX_LIMIT =        40.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+
+[AXIS_W]
+MIN_LIMIT = -4.0
+MAX_LIMIT = 4.0
+MAX_VELOCITY = 4
+MAX_ACCELERATION = 1000.0
+
+[JOINT_8]
+TYPE =             LINEAR
+HOME =             0.0
+MAX_VELOCITY =     4
+MAX_ACCELERATION = 1000.0
+BACKLASH =         0.000
+INPUT_SCALE =      4000
+OUTPUT_SCALE =     1.000
+MIN_LIMIT =        -4.0
+MAX_LIMIT =        4.0
+FERROR =           0.050
+MIN_FERROR =       0.010
+

tests/motion-logger/basic/test.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+rm -f out.motion-logger*
+
+for SRC in *.in; do
+    DEST=$(basename "${SRC}" .in)
+    rm -f "${DEST}"
+    grep -E -v '(^ *$)|(^ *#)' "${SRC}" > "${DEST}"
+done
+
+linuxcnc -r test.ini
+