Import LinuxCNC source tree

tests/m70-m73/m73-flood-mist-restore.0/README

@@ -0,0 +1,2 @@
+test for restoring both M7 and M8 after being turned off in a sub
+with M73 autorestore set

tests/m70-m73/m73-flood-mist-restore.0/expected

@@ -0,0 +1,31 @@
+ N..... USE_LENGTH_UNITS(CANON_UNITS_MM)
+ N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+ N..... SET_G92_OFFSET(0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+ N..... SET_XY_ROTATION(0.0000)
+ N..... SET_FEED_REFERENCE(CANON_XYZ)
+ N..... ON_RESET()
+ N..... COMMENT("mist on")
+ N..... MIST_ON()
+ N..... COMMENT("flood on")
+ N..... FLOOD_ON()
+ N..... COMMENT("mist+flood off")
+ N..... MIST_OFF()
+ N..... FLOOD_OFF()
+ N..... SET_FEED_RATE(0.0000)
+ N..... SET_SPINDLE_SPEED(0, 0.0000)
+ N..... MIST_ON()
+ N..... SET_MOTION_CONTROL_MODE(CANON_CONTINUOUS, 0.000000)
+ N..... SET_NAIVECAM_TOLERANCE(0.0000)
+ N..... FLOOD_ON()
+ N..... COMMENT("mist+flood must be on again here since restored by M73:")
+ N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
+ N..... SET_XY_ROTATION(0.0000)
+ N..... SET_FEED_MODE(0, 0)
+ N..... SET_FEED_RATE(0.0000)
+ N..... STOP_SPINDLE_TURNING(0)
+ N..... SET_SPINDLE_MODE(0 0.0000)
+ N..... MIST_OFF()
+ N..... FLOOD_OFF()
+ N..... PROGRAM_END()
+ N..... ON_RESET()
+ N..... ON_RESET()

tests/m70-m73/m73-flood-mist-restore.0/test.ngc

@@ -0,0 +1,19 @@
+;py,from interpreter import *
+
+o1000 sub
+M73
+M9 (mist+flood off)
+o1000 endsub
+
+
+m7 (mist on)
+m8 (flood on)
+
+o1000 call
+
+(mist+flood must be on again here since restored by M73:)
+
+;py,assert this.params["_mist"] == 1.0
+;py,assert this.params["_flood"] == 1.0
+
+m2

tests/m70-m73/m73-flood-mist-restore.0/test.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+rs274 -g test.ngc | awk '{$1=""; print}'
+exit "${PIPESTATUS[0]}"