wangdequan/linuxcncAllWasm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Import LinuxCNC source tree

Browse Source
This commit is contained in:
Wang Dequan
2026-08-20 06:17:39 +08:00
commit 2c814634c3
9429 changed files with 10556013 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
nc_files/remap_lib/common_nc_subs/reset_state.ngc Normal file
View File

@@ -0,0 +1,25 @@
o<reset_state> sub
; if say a G38 probe was interrupted during a remap, this leaves the G38 modal state active
; clear it out here, and any other state you what to have established after an error
;
; executing an M2 here is NOT recommended here, so we replicate the steps taken by an M2
; but keep executing
G54 (origin offsets are set to the default)
G17 (select XY plane)
G90 (absolute)
G94 (feed mode: units/minute)
M48 (set feed and speed overrides)
G40 (cutter compensation off)
M5 (spindle off)
; M2 sets G1, but this fails with feed zero
; a G80 is the next best safe thing
G80 (cancel modal motion)
M9 (mist and coolant off)
o<reset_state> endsub
m2