Import LinuxCNC source tree

debian/tests/linuxcnc-test-ui.py

@@ -0,0 +1,88 @@
+#!/usr/bin/env python3
+
+import linuxcnc
+import linuxcnc_util
+import hal
+
+import time
+import sys
+import os
+
+#
+# connect to LinuxCNC
+#
+
+c = linuxcnc.command()
+s = linuxcnc.stat()
+e = linuxcnc.error_channel()
+l = linuxcnc_util.LinuxCNC(command=c, status=s, error=e)
+
+#
+# Create and connect test feedback comp
+#
+h = hal.component("test-ui")
+h.newpin("Xpos", hal.HAL_FLOAT, hal.HAL_IN)
+h.newpin("Ypos", hal.HAL_FLOAT, hal.HAL_IN)
+h.newpin("Zpos", hal.HAL_FLOAT, hal.HAL_IN)
+h.newpin("counter", hal.HAL_FLOAT, hal.HAL_IN)
+h.ready()
+os.system("halcmd source ./linuxcnc-test.hal")
+
+def print_state():
+    sys.stderr.write(
+        "line=%d; Xpos=%.2f; Ypos=%.2f; Zpos=%.2f; counter=%d\n" %
+        (s.current_line, h["Xpos"], h["Ypos"], h["Zpos"], h["counter"]))
+
+#
+# Come out of E-stop, turn the machine on, home, and switch to Auto mode.
+#
+
+c.state(linuxcnc.STATE_ESTOP_RESET)
+c.state(linuxcnc.STATE_ON)
+c.home(0)
+c.home(1)
+c.home(2)
+l.wait_for_home([1, 1, 1, 0, 0, 0, 0, 0, 0])
+c.mode(linuxcnc.MODE_AUTO)
+        
+
+#
+# run the .ngc test file, starting from the special line
+#
+
+c.program_open('linuxcnc-test.ngc')
+
+epsilon = 0.000001
+def mod_5_is_0(x):
+    return abs((x+epsilon) % 5) < 2*epsilon
+
+# Take first step
+c.auto(linuxcnc.AUTO_STEP)
+
+count = 0
+while True:
+    s.poll()
+    (x, y) = (h["Xpos"], h["Ypos"])
+    if mod_5_is_0(x) and mod_5_is_0(y):
+        # Both axes on goal; make next step and let motion start
+        sys.stderr.write("Taking step from X%.2f Y%.2f\n" % (x, y))
+        c.auto(linuxcnc.AUTO_STEP)
+        time.sleep(0.1)
+
+    print_state()
+
+    count += 1
+    if count >= 1000:  # Shouldn't happen, but prevent runaways
+        sys.stderr.write("Finished:  Exceeded max cycles\n")
+        sys.exit(1)
+    if s.interp_state == linuxcnc.INTERP_IDLE:
+        sys.stderr.write("Finished:  Detected program finish\n")
+        break
+
+    time.sleep(0.1)
+
+if h["counter"] != 25:
+    sys.stderr.write("End counter incorrect:  %d != 25\n" % h["counter"])
+    sys.exit(1)
+
+sys.exit(0)