Import LinuxCNC source tree

configs/sim/qtdragon_hd/qtdragon_hd_xyz/README

@@ -0,0 +1,11 @@
+QtDragonHD sample configs
+
+Fantastic large screen for mills/routers designed by forum personality Persei.
+Optional choice of basic or versa probe screens.
+Optional laser sight control
+Optional toolplate Z setting
+Optional auto lift spindle at pause
+bolt circle and basic facing wizards
+
+
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAB.hal

@@ -0,0 +1,64 @@
+# core HAL config file for simulation
+
+# first load all the RT modules that will be needed
+# kinematics
+loadrt [KINS]KINEMATICS
+#autoconverted  trivkins
+# motion controller, get name and thread periods from ini file
+loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS
+# load 6 differentiators (for velocity and accel signals
+loadrt ddt names=ddt_x,ddt_xv,ddt_y,ddt_yv,ddt_z,ddt_zv
+# load additional blocks
+loadrt hypot names=vel_xy,vel_xyz
+
+# add motion controller functions to servo thread
+addf motion-command-handler servo-thread
+addf motion-controller servo-thread
+# link the differentiator functions into the code
+addf ddt_x servo-thread
+addf ddt_xv servo-thread
+addf ddt_y servo-thread
+addf ddt_yv servo-thread
+addf ddt_z servo-thread
+addf ddt_zv servo-thread
+addf vel_xy servo-thread
+addf vel_xyz servo-thread
+
+# create HAL signals for position commands from motion module
+# loop position commands back to motion module feedback
+net Xpos joint.0.motor-pos-cmd => joint.0.motor-pos-fb ddt_x.in
+net Ypos joint.1.motor-pos-cmd => joint.1.motor-pos-fb ddt_y.in
+net Zpos joint.2.motor-pos-cmd => joint.2.motor-pos-fb ddt_z.in
+net Apos joint.3.motor-pos-cmd => joint.3.motor-pos-fb
+net Bpos joint.4.motor-pos-cmd => joint.4.motor-pos-fb
+#net Cpos joint.5.motor-pos-cmd => joint.5.motor-pos-fb
+#net Upos joint.6.motor-pos-cmd => joint.6.motor-pos-fb
+#net Vpos joint.7.motor-pos-cmd => joint.7.motor-pos-fb
+#net Wpos joint.8.motor-pos-cmd => joint.8.motor-pos-fb
+
+# send the position commands thru differentiators to
+# generate velocity and accel signals
+net Xvel ddt_x.out => ddt_xv.in vel_xy.in0
+net Xacc <= ddt_xv.out
+net Yvel ddt_y.out => ddt_yv.in vel_xy.in1
+net Yacc <= ddt_yv.out
+net Zvel ddt_z.out => ddt_zv.in vel_xyz.in0
+net Zacc <= ddt_zv.out
+
+# Cartesian 2- and 3-axis velocities
+net XYvel vel_xy.out => vel_xyz.in1
+net XYZvel <= vel_xyz.out
+
+# estop loopback
+net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
+
+# create signals for tool loading loopback
+net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
+net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
+
+net spindle-fwd spindle.0.forward
+net spindle-rev spindle.0.reverse
+#net spindle-speed spindle.0.speed-out
+
+net flood iocontrol.0.coolant-flood
+net mist iocontrol.0.coolant-mist

configs/sim/qtdragon_hd/qtdragon_hd_xyz/core_sim_XYZAC.hal

@@ -0,0 +1,64 @@
+# core HAL config file for simulation
+
+# first load all the RT modules that will be needed
+# kinematics
+loadrt [KINS]KINEMATICS
+#autoconverted  trivkins
+# motion controller, get name and thread periods from ini file
+loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS
+# load 6 differentiators (for velocity and accel signals
+loadrt ddt names=ddt_x,ddt_xv,ddt_y,ddt_yv,ddt_z,ddt_zv
+# load additional blocks
+loadrt hypot names=vel_xy,vel_xyz
+
+# add motion controller functions to servo thread
+addf motion-command-handler servo-thread
+addf motion-controller servo-thread
+# link the differentiator functions into the code
+addf ddt_x servo-thread
+addf ddt_xv servo-thread
+addf ddt_y servo-thread
+addf ddt_yv servo-thread
+addf ddt_z servo-thread
+addf ddt_zv servo-thread
+addf vel_xy servo-thread
+addf vel_xyz servo-thread
+
+# create HAL signals for position commands from motion module
+# loop position commands back to motion module feedback
+net Xpos joint.0.motor-pos-cmd => joint.0.motor-pos-fb ddt_x.in
+net Ypos joint.1.motor-pos-cmd => joint.1.motor-pos-fb ddt_y.in
+net Zpos joint.2.motor-pos-cmd => joint.2.motor-pos-fb ddt_z.in
+net Apos joint.3.motor-pos-cmd => joint.3.motor-pos-fb
+net Cpos joint.4.motor-pos-cmd => joint.4.motor-pos-fb
+#net Cpos joint.5.motor-pos-cmd => joint.5.motor-pos-fb
+#net Upos joint.6.motor-pos-cmd => joint.6.motor-pos-fb
+#net Vpos joint.7.motor-pos-cmd => joint.7.motor-pos-fb
+#net Wpos joint.8.motor-pos-cmd => joint.8.motor-pos-fb
+
+# send the position commands thru differentiators to
+# generate velocity and accel signals
+net Xvel ddt_x.out => ddt_xv.in vel_xy.in0
+net Xacc <= ddt_xv.out
+net Yvel ddt_y.out => ddt_yv.in vel_xy.in1
+net Yacc <= ddt_yv.out
+net Zvel ddt_z.out => ddt_zv.in vel_xyz.in0
+net Zacc <= ddt_zv.out
+
+# Cartesian 2- and 3-axis velocities
+net XYvel vel_xy.out => vel_xyz.in1
+net XYZvel <= vel_xyz.out
+
+# estop loopback
+net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
+
+# create signals for tool loading loopback
+net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
+net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
+
+net spindle-fwd spindle.0.forward
+net spindle-rev spindle.0.reverse
+#net spindle-speed spindle.0.speed-out
+
+net flood iocontrol.0.coolant-flood
+net mist iocontrol.0.coolant-mist

configs/sim/qtdragon_hd/qtdragon_hd_xyz/on_abort.ngc

@@ -0,0 +1,31 @@
+o<on_abort> sub
+
+
+o100 if [#1 eq 5]
+    (machine on)
+o100 elseif [#1 eq 6]
+    (machine off)
+o100 elseif [#1 eq 7]
+    (estopped)
+o100 elseif [#1 eq 8]
+    (msg,Process Aborted)
+o100 else
+    (DEBUG,Abort Parameter is %d[#1])
+o100 endif
+
+o<on_abort> endsub
+m2
+
+These are potential abort number:
+
+        EMC_ABORT_TASK_EXEC_ERROR = 1,
+        EMC_ABORT_AUX_ESTOP = 2,
+        EMC_ABORT_MOTION_OR_IO_RCS_ERROR = 3,
+        EMC_ABORT_TASK_STATE_OFF = 4,
+        EMC_ABORT_TASK_STATE_ESTOP_RESET = 5,
+        EMC_ABORT_TASK_STATE_ESTOP = 6,
+        EMC_ABORT_TASK_STATE_NOT_ON = 7,
+        EMC_ABORT_TASK_ABORT = 8,
+        EMC_ABORT_INTERPRETER_ERROR = 9,        // interpreter failed during readahead
+        EMC_ABORT_INTERPRETER_ERROR_MDI = 10,   // interpreter failed during MDI execution
+        EMC_ABORT_USER = 100  // user-defined abort codes start here

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_postgui.hal

@@ -0,0 +1,58 @@
+# load components
+########################################################################
+
+loadrt logic names=logic-and personality=0x102
+addf logic-and servo-thread
+
+# load a summing component for adding spindle lift and Z compensation
+loadrt scaled_s32_sums
+addf scaled-s32-sums.0 servo-thread
+
+loadusr -Wn z_level_compensation z_level_compensation
+# method parameter must be one of nearest(2), linear(1), cubic (0)
+setp z_level_compensation.fade-height 0.0
+setp z_level_compensation.method 1
+
+# connect signals
+########################################################################
+
+net spindle-speed-limited  =>  spindle.0.speed-out-rps => spindle.0.speed-in
+
+# the unlink pin commands are only used, because they are connected 
+# in core_sim.hal and we use this file to simulate
+unlinkp iocontrol.0.tool-change
+unlinkp iocontrol.0.tool-changed
+unlinkp iocontrol.0.tool-prep-number
+
+net tool-change      hal_manualtoolchange.change   <=  iocontrol.0.tool-change 
+net tool-changed     hal_manualtoolchange.changed  <=  iocontrol.0.tool-changed
+net tool-prep-number hal_manualtoolchange.number   <=  iocontrol.0.tool-prep-number
+
+net eoffset-clear    axis.z.eoffset-clear
+net eoffset-counts   axis.z.eoffset-counts
+setp axis.z.eoffset-scale .001
+net eoffset-total          axis.z.eoffset
+net eoffset-total          qtdragon.eoffset-value
+setp axis.z.eoffset-enable True
+
+## external offsets for spindle pause function
+##################################################
+net eoffset-clear     qtdragon.eoffset-clear
+net eoffset-spindle-count   <= qtdragon.eoffset-spindle-count    
+net spindle-pause     qtdragon.spindle-inhibit        =>  spindle.0.inhibit
+net eoffset-state     qtdragon.eoffset-is-active      <=  motion.eoffset-active
+
+## Z level compensation
+####################################################
+net eoffset-clr2            z_level_compensation.clear      => logic-and.in-01
+net xpos-cmd                z_level_compensation.x-pos      <= axis.x.pos-cmd
+net ypos-cmd                z_level_compensation.y-pos      <= axis.y.pos-cmd
+net zpos-cmd                z_level_compensation.z-pos      <= axis.z.pos-cmd
+net z_compensation_on       z_level_compensation.enable-in  <= qtdragon.comp-on
+net eoffset-zlevel-count    z_level_compensation.counts     => qtdragon.eoffset-zlevel-count
+
+net eoffset-spindle-count   scaled-s32-sums.0.in0
+net eoffset-zlevel-count    scaled-s32-sums.0.in1
+setp scaled-s32-sums.0.scale0 1000
+net eoffset-counts          scaled-s32-sums.0.out-s
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical.ini

@@ -0,0 +1,241 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp  qtdragon_hd_vert
+TITLE = QtDragon HD Vertical: XYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd_vert.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+#Prevent tool mark disappearing with small tool diameter in g-code preview widget
+GCODE_VIEW_TOOL_MIN_DIA = 2.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon_hd.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons
+MDI_COMMAND = G0 Z25 X0 Y0;Z0,Goto\nZero
+MDI_COMMAND = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMach\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+EMCIO = io
+CYCLE_TIME = 0.100
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical_xyza.ini

@@ -0,0 +1,265 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon_hd_vert
+TITLE = QtDragon HD: XYZA Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+#Prevent tool mark disappearing with small tool diameter in g-code preview widget
+GCODE_VIEW_TOOL_MIN_DIA = 2.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZA
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+#NUM_AIO = 12
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZA
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-gantry-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini

@@ -0,0 +1,239 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp -d qtdragon_hd
+TITLE = QtDragon HD: XYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+#Prevent tool mark disappearing with small tool diameter in g-code preview widget
+GCODE_VIEW_TOOL_MIN_DIA = 2.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon_hd.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons
+MDI_COMMAND_MACRO0 = G0 Z25 X0 Y0;Z0,Goto\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMach\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini

@@ -0,0 +1,262 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon_hd
+TITLE = QtDragon HD: XYZA Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZA
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+#NUM_AIO = 12
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZA
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-gantry-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini

@@ -0,0 +1,278 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon_hd
+TITLE = QtDragon XYZAB Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZAB
+JOINTS = 5
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+#NUM_AIO = 12
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZAB
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = core_sim_XYZAB.hal
+HALFILE = simulated_home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[AXIS_B]
+MAX_VELOCITY = 90.0
+MAX_ACCELERATION = 1200.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_4]
+TYPE =                          ANGULAR
+HOME =                          0.0
+MAX_VELOCITY =                  90.0
+MAX_ACCELERATION =              1200.0
+BACKLASH = 0.000
+INPUT_SCALE =                   40
+OUTPUT_SCALE = 1.000
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME_OFFSET =                    0.0
+HOME_SEARCH_VEL =                0.0
+HOME_LATCH_VEL =                 0.0
+HOME_USE_INDEX =                 NO
+HOME_IGNORE_LIMITS =             NO
+HOME_SEQUENCE = 0
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini

@@ -0,0 +1,278 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon_hd
+TITLE = QtDragon XYZA Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZAC
+JOINTS = 5
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+#NUM_AIO = 12
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZAC
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = core_sim_XYZAC.hal
+HALFILE = simulated_home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[AXIS_C]
+MAX_VELOCITY = 90.0
+MAX_ACCELERATION = 1200.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_4]
+TYPE =                          ANGULAR
+HOME =                          0.0
+MAX_VELOCITY =                  90.0
+MAX_ACCELERATION =              1200.0
+BACKLASH = 0.000
+INPUT_SCALE =                   40
+OUTPUT_SCALE = 1.000
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME_OFFSET =                    0.0
+HOME_SEARCH_VEL =                0.0
+HOME_LATCH_VEL =                 0.0
+HOME_USE_INDEX =                 NO
+HOME_IGNORE_LIMITS =             NO
+HOME_SEQUENCE = 0
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_next_xyz.ini

@@ -0,0 +1,231 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp -d qtdragon_next
+TITLE = QtDragon HD: XYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon_hd.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons
+MDI_COMMAND_MACRO0 = G0 Z25 X0 Y0;Z0,Goto\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMach\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+#POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_xyz/tool.tbl

@@ -0,0 +1,4 @@
+T1 P1 X0 Y0 Z0.51100 A0 B0 C0 U0 V0 W0 D10.00000 I0 J0 Q0 ;1/8 end mill 
+T2 P2 X0 Y0 Z0.10000 A0 B0 C0 U0 V0 W0 D0.06250 I0 J0 Q0 ;1/16 end mill 
+T3 P3 X0 Y0 Z1.27300 A0 B0 C0 U0 V0 W0 D0.20100 I0 J0 Q0 ;#7 tap drill 
+T4 P4 X0 Y0 Z3.00000 A0 B0 C0 U0 V0 W0 D4.00000 I0 J0 Q0 ;4" Face Mill 

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/README

@@ -0,0 +1,12 @@
+QtDragonHD sample configs
+
+Fantastic large screen for mills/routers designed by forum personality Persei.
+Optional choice of basic or versa probe screens.
+Optional laser sight control
+Optional toolplate Z setting
+Optional auto lift spindle at pause
+bolt circle and basic facing wizards
+
+Demo of z level compensation using probed_points file.
+Probed point is made with included gcode ripper.
+

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/on_abort.ngc

@@ -0,0 +1,31 @@
+o<on_abort> sub
+
+
+o100 if [#1 eq 5]
+    (machine on)
+o100 elseif [#1 eq 6]
+    (machine off)
+o100 elseif [#1 eq 7]
+    (estopped)
+o100 elseif [#1 eq 8]
+    (msg,Process Aborted)
+o100 else
+    (DEBUG,Abort Parameter is %d[#1])
+o100 endif
+
+o<on_abort> endsub
+m2
+
+These are potential abort number:
+
+        EMC_ABORT_TASK_EXEC_ERROR = 1,
+        EMC_ABORT_AUX_ESTOP = 2,
+        EMC_ABORT_MOTION_OR_IO_RCS_ERROR = 3,
+        EMC_ABORT_TASK_STATE_OFF = 4,
+        EMC_ABORT_TASK_STATE_ESTOP_RESET = 5,
+        EMC_ABORT_TASK_STATE_ESTOP = 6,
+        EMC_ABORT_TASK_STATE_NOT_ON = 7,
+        EMC_ABORT_TASK_ABORT = 8,
+        EMC_ABORT_INTERPRETER_ERROR = 9,        // interpreter failed during readahead
+        EMC_ABORT_INTERPRETER_ERROR_MDI = 10,   // interpreter failed during MDI execution
+        EMC_ABORT_USER = 100  // user-defined abort codes start here

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/probe_points.txt

@@ -0,0 +1,25 @@
+-50.000000 -50.000000 -0.032200 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-25.000000 -50.000000 -0.008866 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+0.000000 -50.000000 0.011133 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+25.000000 -50.000000 0.037800 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+50.000000 -50.000000 0.041133 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-50.000000 -25.000000 -0.028867 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-25.000000 -25.000000 -0.002200 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+0.000000 -25.000000 0.024467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+25.000000 -25.000000 0.054467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+50.000000 -25.000000 0.044467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-50.000000 0.000000 -0.045533 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-25.000000 0.000000 -0.012200 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-0.000000 0.000000 0.021133 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+25.000000 0.000000 0.044467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+50.000000 0.000000 0.034467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-50.000000 25.000000 -0.055533 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-25.000000 25.000000 -0.025533 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+0.000000 25.000000 0.007800 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+25.000000 25.000000 0.034467 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+50.000000 25.000000 0.041134 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-50.000000 50.000000 -0.068867 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+-25.000000 50.000000 -0.038866 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+0.000000 50.000000 -0.008866 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+25.000000 50.000000 0.027800 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
+50.000000 50.000000 0.031133 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_postgui.hal

@@ -0,0 +1,58 @@
+# load components
+########################################################################
+
+loadrt logic names=logic-and personality=0x102
+addf logic-and servo-thread
+
+# load a summing component for adding spindle lift and Z compensation
+loadrt scaled_s32_sums
+addf scaled-s32-sums.0 servo-thread
+
+loadusr -Wn z_level_compensation z_level_compensation
+# method parameter must be one of nearest(2), linear(1), cubic (0)
+setp z_level_compensation.fade-height 0.0
+setp z_level_compensation.method 1
+
+# connect signals
+########################################################################
+
+net spindle-speed-limited  =>  spindle.0.speed-out-rps => spindle.0.speed-in
+
+# the unlink pin commands are only used, because they are connected 
+# in core_sim.hal and we use this file to simulate
+unlinkp iocontrol.0.tool-change
+unlinkp iocontrol.0.tool-changed
+unlinkp iocontrol.0.tool-prep-number
+
+net tool-change      hal_manualtoolchange.change   <=  iocontrol.0.tool-change 
+net tool-changed     hal_manualtoolchange.changed  <=  iocontrol.0.tool-changed
+net tool-prep-number hal_manualtoolchange.number   <=  iocontrol.0.tool-prep-number
+
+net eoffset-clear    axis.z.eoffset-clear
+net eoffset-counts   axis.z.eoffset-counts
+setp axis.z.eoffset-scale .001
+net eoffset-total          axis.z.eoffset
+net eoffset-total          qtdragon.eoffset-value
+setp axis.z.eoffset-enable True
+
+## external offsets for spindle pause function
+##################################################
+net eoffset-clear     qtdragon.eoffset-clear
+net eoffset-spindle-count   <= qtdragon.eoffset-spindle-count    
+net spindle-pause     qtdragon.spindle-inhibit      =>  spindle.0.inhibit
+net eoffset-state     qtdragon.eoffset-is-active    <=  motion.eoffset-active
+
+## Z level compensation
+####################################################
+net eoffset-clr2            z_level_compensation.clear      => logic-and.in-01
+net xpos-cmd                z_level_compensation.x-pos      <= axis.x.pos-cmd
+net ypos-cmd                z_level_compensation.y-pos      <= axis.y.pos-cmd
+net zpos-cmd                z_level_compensation.z-pos      <= axis.z.pos-cmd
+net z_compensation_on       z_level_compensation.enable-in  <= qtdragon.comp-on
+net eoffset-zlevel-count    z_level_compensation.counts     => qtdragon.eoffset-zlevel-count
+
+net eoffset-spindle-count   scaled-s32-sums.0.in0
+net eoffset-zlevel-count    scaled-s32-sums.0.in1
+setp scaled-s32-sums.0.scale0 1000
+net eoffset-counts          scaled-s32-sums.0.out-s
+

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini

@@ -0,0 +1,233 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon_hd as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp -d qtdragon_hd
+TITLE = QtDragon HD: XYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon_hd.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon_hd.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons
+MDI_COMMAND_MACRO0 = G0 Z25 X0 Y0;Z0,Goto\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMach\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_hd_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# uncomment to simulate probing
+#POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/tool.tbl

@@ -0,0 +1,4 @@
+T1 P1 X0 Y0 Z0.51100 A0 B0 C0 U0 V0 W0 D10.00000 I0 J0 Q0 ;1/8 end mill 
+T2 P2 X0 Y0 Z0.10000 A0 B0 C0 U0 V0 W0 D0.06250 I0 J0 Q0 ;1/16 end mill 
+T3 P3 X0 Y0 Z1.27300 A0 B0 C0 U0 V0 W0 D0.20100 I0 J0 Q0 ;#7 tap drill 
+T4 P4 X0 Y0 Z3.00000 A0 B0 C0 U0 V0 W0 D4.00000 I0 J0 Q0 ;4" Face Mill