Import LinuxCNC source tree

configs/sim/qtdragon/README

@@ -0,0 +1,11 @@
+QtDragon sample configs
+
+Fantastic large screen for mills/routers designed by forum personality Persei.
+
+Qtdragon screen is resizable.
+Optional choice of basic or versa probe screens.
+Optional laser sight control
+Optional toolplate Z setting
+Optional auto lift spindle at pause
+bolt circle and basic facing wizards
+

configs/sim/qtdragon/qtdragon_multi_joint/README

@@ -0,0 +1,7 @@
+QtDragon sample configs
+
+Various versions of different gantry and rotational axis options
+
+qtdragon_XYYZ
+qtdragon_XYZY
+qtdragon_XYZYA

configs/sim/qtdragon/qtdragon_multi_joint/on_abort.ngc

@@ -0,0 +1,31 @@
+o<on_abort> sub
+
+
+o100 if [#1 eq 5]
+    (machine on)
+o100 elseif [#1 eq 6]
+    (machine off)
+o100 elseif [#1 eq 7]
+    (estopped)
+o100 elseif [#1 eq 8]
+    (msg,Process Aborted)
+o100 else
+    (DEBUG,Abort Parameter is %d[#1])
+o100 endif
+
+o<on_abort> endsub
+m2
+
+These are potential abort number:
+
+        EMC_ABORT_TASK_EXEC_ERROR = 1,
+        EMC_ABORT_AUX_ESTOP = 2,
+        EMC_ABORT_MOTION_OR_IO_RCS_ERROR = 3,
+        EMC_ABORT_TASK_STATE_OFF = 4,
+        EMC_ABORT_TASK_STATE_ESTOP_RESET = 5,
+        EMC_ABORT_TASK_STATE_ESTOP = 6,
+        EMC_ABORT_TASK_STATE_NOT_ON = 7,
+        EMC_ABORT_TASK_ABORT = 8,
+        EMC_ABORT_INTERPRETER_ERROR = 9,        // interpreter failed during readahead
+        EMC_ABORT_INTERPRETER_ERROR_MDI = 10,   // interpreter failed during MDI execution
+        EMC_ABORT_USER = 100  // user-defined abort codes start here

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_postgui.hal

@@ -0,0 +1,22 @@
+net spindle-speed-limited  =>  spindle.0.speed-out-rps => spindle.0.speed-in
+
+# the unlink pin commands are only used, because they are connected 
+# in core_sim.hal and we use this file to simulate
+unlinkp iocontrol.0.tool-change
+unlinkp iocontrol.0.tool-changed
+unlinkp iocontrol.0.tool-prep-number
+
+net tool-change      hal_manualtoolchange.change   <=  iocontrol.0.tool-change 
+net tool-changed     hal_manualtoolchange.changed  <=  iocontrol.0.tool-changed
+net tool-prep-number hal_manualtoolchange.number   <=  iocontrol.0.tool-prep-number
+
+# external offset spindle auto raise on pause
+net spindle-pause     qtdragon.spindle-inhibit       =>   spindle.0.inhibit
+net eoffset_clear     qtdragon.eoffset-clear         =>   axis.z.eoffset-clear
+net eoffset_count     qtdragon.eoffset-spindle-count =>   axis.z.eoffset-counts
+net eoffset           qtdragon.eoffset-value         <=   axis.z.eoffset
+net eoffset-state     qtdragon.eoffset-is-active     <=   motion.eoffset-active
+
+setp axis.z.eoffset-enable 1
+setp axis.z.eoffset-scale 1.0
+

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini

@@ -0,0 +1,255 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYYZ kinstype=BOTH
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-xyyz-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyzw.ini

@@ -0,0 +1,283 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp -d qtdragon
+TITLE = QtDragon XYYZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYYZW kinstype=BOTH
+JOINTS = 5
+
+[EMCIO]
+EMCIO = io
+CYCLE_TIME = 0.100
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYYZW
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim-5.hal
+HALFILE = simulated-xyyz-5-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+#******************************************
+[AXIS_W]
+MAX_VELOCITY = 20.0
+MAX_ACCELERATION = 120.0
+MIN_LIMIT = 0.0
+MAX_LIMIT = 20.0
+
+[JOINT_4]
+TYPE = LINEAR
+HOME = .20
+FERROR = 10.0
+MIN_FERROR = 1.0
+MAX_ERROR = 0.0127
+MAX_VELOCITY = 20
+MAX_ACCELERATION = 120.0
+# The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION
+# If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger.
+STEPGEN_MAX_VEL = 25
+STEPGEN_MAX_ACC = 150.00
+MAX_OUTPUT = 0.0
+STEP_SCALE = 200
+MIN_LIMIT = 0.0
+MAX_LIMIT = 20.0
+HOME_OFFSET = -0.25000
+
+HOME_SEQUENCE = 3

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini

@@ -0,0 +1,254 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZY Gantry
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZY kinstype=BOTH
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZY
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-gantry-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini

@@ -0,0 +1,278 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZYA Gantry/Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZYA kinstype=BOTH
+JOINTS = 5
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZYA
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-gantry-home.hal
+# our HAL simulation library doesn't connect this - so we do
+POSTGUI_HALCMD = net joint_4_pos joint.4.motor-pos-cmd => joint.4.motor-pos-fb
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_4]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_yyxz.ini

@@ -0,0 +1,255 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon YYXZ
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=YYXZ kinstype=BOTH
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = YYXZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-xyyz-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_2]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_0]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_multi_joint/tool.tbl

@@ -0,0 +1,4 @@
+T1 P1 X0 Y0 Z0.51100 A0 B0 C0 U0 V0 W0 D10.00000 I0 J0 Q0 ;1/8 end mill 
+T2 P2 X0 Y0 Z0.10000 A0 B0 C0 U0 V0 W0 D0.06250 I0 J0 Q0 ;1/16 end mill 
+T3 P3 X0 Y0 Z1.27300 A0 B0 C0 U0 V0 W0 D0.20100 I0 J0 Q0 ;#7 tap drill 
+T4 P4 X0 Y0 Z3.00000 A0 B0 C0 U0 V0 W0 D4.00000 I0 J0 Q0 ;4" Face Mill 

configs/sim/qtdragon/qtdragon_tool_probe/README

@@ -0,0 +1,8 @@
+QtDragon sample configs
+
+qtdragon_auto_tool_probe:
+
+Demonstrates custom remap to automatically probe tool length at tool changes:
+
+
+

configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini

@@ -0,0 +1,277 @@
+# Linuxcnc controller parameters for a simulated machine using QtDragon screen
+
+# General note: Comments can either be preceded with a # or ; - either is
+# acceptable, although # is in keeping with most linux config files.
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZ Auto Tool Probe
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# The path must also be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ~/linuxcnc/nc_files/examples/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH =\
+~/linuxcnc/nc_files/examples/ngcgui_lib:\
+~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs:\
+~/linuxcnc/nc_files/examples/remap-subroutines:\
+~/linuxcnc/nc_files/examples/remap_lib
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+# this remaps m6 to do auto probing after tool change
+REMAP=M6 modalgroup=6 prolog=change_prolog ngc=qt_auto_probe_tool epilog=change_epilog
+
+# required for python remaps
+[PYTHON]
+# The path to start a search for user modules. ie python's sys.path.insert(0,PATH)
+#PATH_PREPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python
+
+# The path start point for all remap searches ie. python's sys.path.append() 
+PATH_APPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python
+# path to the tremap's 'oplevel file
+TOPLEVEL = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python/toplevel.py
+# set remap debug level
+#LOG_LEVEL = 1000
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+# added to simulate probing
+POSTGUI_HALCMD = loadusr qtvcp test_probe
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+
+USE_PROBE = versaprobe
+#USE_PROBE = basicprobe
+
+# where in absolute machine units to change the tool
+[CHANGE_POSITION]
+# Abs (G53) coordinates remap tool change point
+X = 10
+Y = 10
+Z = 8
+
+# where in absolute machine units to probe the tool
+[VERSA_TOOLSETTER]
+X = 300
+Y = 300
+Z = -50
+# how high to lift when moving to the tool setter
+Z_MAX_CLEAR = 9.999
+# tool setter diameter for diameter probing
+DIAMETER = 25
+# maximum machine units to lower while probing
+MAXPROBE =  40
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift and auto leveling
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_postgui.hal

@@ -0,0 +1,22 @@
+net spindle-speed-limited  =>  spindle.0.speed-out-rps => spindle.0.speed-in
+
+# the unlink pin commands are only used, because they are connected 
+# in core_sim.hal and we use this file to simulate
+unlinkp iocontrol.0.tool-change
+unlinkp iocontrol.0.tool-changed
+unlinkp iocontrol.0.tool-prep-number
+
+net tool-change      hal_manualtoolchange.change   <=  iocontrol.0.tool-change 
+net tool-changed     hal_manualtoolchange.changed  <=  iocontrol.0.tool-changed
+net tool-prep-number hal_manualtoolchange.number   <=  iocontrol.0.tool-prep-number
+
+# external offset spindle auto raise on pause
+net spindle-pause     qtdragon.spindle-inhibit       =>   spindle.0.inhibit
+net eoffset_clear     qtdragon.eoffset-clear         =>   axis.z.eoffset-clear
+net eoffset_count     qtdragon.eoffset-spindle-count =>   axis.z.eoffset-counts
+net eoffset           qtdragon.eoffset-value         <=   axis.z.eoffset
+net eoffset-state     qtdragon.eoffset-is-active     <=   motion.eoffset-active
+
+setp axis.z.eoffset-enable 1
+setp axis.z.eoffset-scale 1.0
+

configs/sim/qtdragon/qtdragon_tool_probe/tool.tbl

@@ -0,0 +1,5 @@
+T1   P1   D+10.000000 Z-51.233083 ;1/8 End Mill 
+T2   P2   D+0.062500 Z+0.100000 ;1/16 End Mill 
+T3   P3   D+0.201000 Z+1.273000 ;#7 Tap Drill 
+T4   P4   D+4.000000 Z+3.000000 ;4" Face Mill 
+T99 P99   D2.00000 ;2mm Probe 

configs/sim/qtdragon/qtdragon_xyz/README

@@ -0,0 +1,7 @@
+QtDragon sample configs
+
+Basic test config for XYZ:
+
+qtdragon_metric
+qtdragon_inch
+

configs/sim/qtdragon/qtdragon_xyz/macros/go_to_position.ngc

@@ -0,0 +1,24 @@
+; Testfile go to position
+; will jog the machine to a given position
+
+O<go_to_position> sub
+
+G17
+G21
+G54
+G61
+G40
+G49
+G80
+G90
+
+;#1 = <X-Pos>
+;#2 = <Y-Pos>
+;#3 = <Z-Pos>
+
+(DEBUG, Will now move machine to %fX = #1 , Y = #2 , Z = #3)
+G0 X #1 Y #2 Z #3
+
+O<go_to_position> endsub
+
+M2

configs/sim/qtdragon/qtdragon_xyz/macros/hello_world.ngc

@@ -0,0 +1,24 @@
+; Testfile "hello world"
+; will just give messages 
+
+O<hello_world> sub
+
+G17
+G21
+G54
+G61
+G40
+G49
+G80
+G90
+
+G0 X10
+
+(MSG, Hello World)
+
+G0X-10
+
+O<hello_world> endsub
+
+M2
+

configs/sim/qtdragon/qtdragon_xyz/macros/increment.ngc

@@ -0,0 +1,22 @@
+; Testfile "increment"
+; will move the machine in relative coordinates
+
+O<increment> sub
+
+G17
+G21
+G54
+G61
+G40
+G49
+G80
+G90
+
+G91 G0 X#1 Y#2
+G90
+
+(DEBUG, %fX was [#1] and Y was [#2])
+
+O<increment> endsub
+
+M2

configs/sim/qtdragon/qtdragon_xyz/macros/lost.ngc

@@ -0,0 +1,24 @@
+; Testfile Lost
+; will jog to machine zero and set all axis to zero
+
+O<lost> sub
+
+G17
+G21
+G54
+G61
+G40
+G49
+G80
+G90
+
+(MSG, Will now move to machine zero)
+G53 G0 X0 Y0 Z0
+(MSG, will now set all axis to zero)
+G10 L20 P0 X0 Y0 Z0
+(MSG, all done)
+
+
+O<lost> endsub
+
+M2

configs/sim/qtdragon/qtdragon_xyz/macros/macro_Instructions.txt

@@ -0,0 +1,39 @@
+This is a small instruction to include macros in Qtdragon.
+
+In your INI File you need to introduce a section called [MACROS]
+and for every macro you'll need to include a one-liner like so:
+
+MACRO = jog_around ,MOVE\nTHERE
+or 
+MACRO = increment xinc yinc ,INCR
+
+where xinc and yinc are placeholders
+Anything after the comma is the button text.
+
+During execution of the macro, you will be asked to enter the values. 
+
+You are allowed to introduce 9 macros! 
+If you enter more macros, only the first 9 will appear with button in gmoccapy.
+
+In the [RS274NGC] section you may want to give a path to your macros like so:
+
+[RS274NGC]
+SUBROUTINE_PATH = nc_files/subroutines 
+
+or you place your macros in the nc_files folder.
+
+Each macro must have it's own file in one of the mentioned folders and they are normal subroutines, so the must begin with:
+
+O<jog_around> sub
+
+and end with
+
+O<jog_around> endsub
+M2
+
+The name of the file must be jog_around.ngc.
+And an macro must contain at least one movement of one axis.
+
+macro name in INI file have to be the same as the file name and the sub must have also the same name (case sensitive!)!
+
+

configs/sim/qtdragon/qtdragon_xyz/macros/move_around.ngc

@@ -0,0 +1,28 @@
+; Testfile "move around"
+; will just move a little bit around
+
+O<move_around> sub
+
+G17
+G21
+G54
+G61
+G40
+G49
+G80
+G90
+
+G91 G0 X 25
+Y-25
+Z-25
+Y25
+X-25
+Z25
+F250
+G2 I 25
+
+(MSG, It is done!)
+
+O<move_around> endsub
+
+M2

configs/sim/qtdragon/qtdragon_xyz/on_abort.ngc

@@ -0,0 +1,31 @@
+o<on_abort> sub
+
+
+o100 if [#1 eq 5]
+    (machine on)
+o100 elseif [#1 eq 6]
+    (machine off)
+o100 elseif [#1 eq 7]
+    (estopped)
+o100 elseif [#1 eq 8]
+    (msg,Process Aborted)
+o100 else
+    (DEBUG,Abort Parameter is %d[#1])
+o100 endif
+
+o<on_abort> endsub
+m2
+
+These are potential abort number:
+
+        EMC_ABORT_TASK_EXEC_ERROR = 1,
+        EMC_ABORT_AUX_ESTOP = 2,
+        EMC_ABORT_MOTION_OR_IO_RCS_ERROR = 3,
+        EMC_ABORT_TASK_STATE_OFF = 4,
+        EMC_ABORT_TASK_STATE_ESTOP_RESET = 5,
+        EMC_ABORT_TASK_STATE_ESTOP = 6,
+        EMC_ABORT_TASK_STATE_NOT_ON = 7,
+        EMC_ABORT_TASK_ABORT = 8,
+        EMC_ABORT_INTERPRETER_ERROR = 9,        // interpreter failed during readahead
+        EMC_ABORT_INTERPRETER_ERROR_MDI = 10,   // interpreter failed during MDI execution
+        EMC_ABORT_USER = 100  // user-defined abort codes start here

configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini

@@ -0,0 +1,266 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon_inch
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZ Inch
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/second
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 1.00
+DEFAULT_LINEAR_VELOCITY = 0.25
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+# optional user dialogs (3), controlled by HAL pins
+# persistent
+MESSAGE_BOLDTEXT = Critical and Persistent
+MESSAGE_TEXT = This is a persistent dialog test
+MESSAGE_DETAILS = There seems to be something wrong\n You must fix it to clear message
+MESSAGE_TYPE = nonedialog
+MESSAGE_PINNAME = nonedialogtest
+MESSAGE_ICON = CRITICAL
+
+# yes no choice
+MESSAGE_BOLDTEXT = Do You Want To Make A Choice?
+MESSAGE_TEXT = This is a yes no dialog test
+MESSAGE_DETAILS = Y/N DETAILS
+MESSAGE_TYPE = yesnodialog
+MESSAGE_PINNAME = yndialogtest
+MESSAGE_ICON = QUESTION
+
+# acknowledge
+MESSAGE_BOLDTEXT = This is an information message
+MESSAGE_TEXT = This is low priority
+MESSAGE_DETAILS = press ok to clear
+MESSAGE_TYPE = okdialog status
+MESSAGE_PINNAME = bothtest
+MESSAGE_ICON = INFO
+
+# optional tab showing an external qtvcp panel
+EMBED_TAB_NAME=Vismach demo
+EMBED_TAB_COMMAND=qtvcp vismach_mill_xyz
+EMBED_TAB_LOCATION=tabWidget_utilities
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z2;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G20 G40 G43H0 G54 G64P0.0005 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = inch
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.01
+MAX_LIMIT = 20.0
+MAX_VELOCITY = 2.5
+MAX_ACCELERATION = 20
+
+[AXIS_Y]
+MIN_LIMIT = -0.01
+MAX_LIMIT = 25.0
+MAX_VELOCITY = 2.5
+MAX_ACCELERATION = 20.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -4.5
+MAX_LIMIT = 0.5
+MAX_VELOCITY = 1.5
+MAX_ACCELERATION = 20.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.01
+MAX_LIMIT = 20.0
+MAX_VELOCITY = 2.5
+MAX_ACCELERATION = 20.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 2.75
+STEPGEN_MAX_ACC = 24.0
+FERROR = 0.050
+MIN_FERROR = 0.010
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 0.75
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 0.75
+HOME_LATCH_VEL = 0.5
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.01
+MAX_LIMIT = 25.0
+MAX_VELOCITY = 2.5
+MAX_ACCELERATION = 20.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 2.75
+STEPGEN_MAX_ACC = 24.0
+FERROR = 0.050
+MIN_FERROR = 0.010
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 0.75
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 0.75
+HOME_LATCH_VEL = 0.5
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -4.5
+MAX_LIMIT = 0.5
+MAX_VELOCITY = 1.5
+MAX_ACCELERATION = 20.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 1.5
+STEPGEN_MAX_ACC = 24.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -0.5
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 0.75
+HOME_LATCH_VEL = 0.5
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini

@@ -0,0 +1,264 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon_metric
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZ Metric
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+# optional user dialogs (3), controlled by HAL pins
+MESSAGE_BOLDTEXT = Critical and Persistent
+MESSAGE_TEXT = This is a persistent dialog test
+MESSAGE_DETAILS = There seems to be something wrong\n You must fix it to clear message
+MESSAGE_TYPE = nonedialog
+MESSAGE_PINNAME = nonedialogtest
+MESSAGE_ICON = CRITICAL
+
+MESSAGE_BOLDTEXT = Do You Want To Make A Choice?
+MESSAGE_TEXT = This is a yes no dialog test
+MESSAGE_DETAILS = Y/N DETAILS
+MESSAGE_TYPE = yesnodialog
+MESSAGE_PINNAME = yndialogtest
+MESSAGE_ICON = QUESTION
+
+MESSAGE_BOLDTEXT = This is an information message
+MESSAGE_TEXT = This is low priority
+MESSAGE_DETAILS = press ok to clear
+MESSAGE_TYPE = okdialog status
+MESSAGE_PINNAME = bothtest
+MESSAGE_ICON = INFO
+
+# optional tab showing an external qtvcp panel
+EMBED_TAB_NAME=Vismach demo
+EMBED_TAB_COMMAND=qtvcp vismach_mill_xyz
+EMBED_TAB_LOCATION=tabWidget_utilities
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+

configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric_debug.ini

@@ -0,0 +1,272 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon_metric
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp -d qtdragon
+TITLE = QtDragon XYZ Metric
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.0
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+# optional user dialogs (3), controlled by HAL pins
+MESSAGE_BOLDTEXT = Critical and Persistent
+MESSAGE_TEXT = This is a persistent dialog test
+MESSAGE_DETAILS = There seems to be something wrong\n You must fix it to clear message
+MESSAGE_TYPE = nonedialog
+MESSAGE_PINNAME = nonedialogtest
+MESSAGE_ICON = CRITICAL
+
+MESSAGE_BOLDTEXT = Do You Want To Make A Choice?
+MESSAGE_TEXT = This is a yes no dialog test
+MESSAGE_DETAILS = Y/N DETAILS
+MESSAGE_TYPE = yesnodialog
+MESSAGE_PINNAME = yndialogtest
+MESSAGE_ICON = QUESTION
+
+MESSAGE_BOLDTEXT = This is an information message
+MESSAGE_TEXT = This is low priority
+MESSAGE_DETAILS = press ok to clear
+MESSAGE_TYPE = okdialog status
+MESSAGE_PINNAME = bothtest
+MESSAGE_ICON = INFO
+
+# optional tab showing an external qtvcp panel
+EMBED_TAB_NAME=Vismach demo
+EMBED_TAB_COMMAND=qtvcp vismach_mill_xyz
+EMBED_TAB_LOCATION=tabWidget_utilities
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[MACROS]
+MACRO_COMMAND_MACRO6 = go_to_position x-pos y-pos z-pos, Go To \nPosition
+MACRO_COMMAND_MACRO2 = lost, LOST
+MACRO_COMMAND_MACRO3 = increment x-incr y-incr, INCR
+MACRO_COMMAND_MACRO4 = macro_4
+MACRO_COMMAND_MACRO5 = macro_5
+
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZ
+JOINTS = 3
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs:./macros
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZ
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+HALBRIDGE = hal_bridge
+
+# loads the HAL machine simulation
+HALFILE = core_sim.hal
+HALFILE = simulated_home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+# used by external offsets for auto spindle lift
+OFFSET_AV_RATIO  = 0.2
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.00000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.000000
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+

configs/sim/qtdragon/qtdragon_xyz/qtdragon_postgui.hal

@@ -0,0 +1,22 @@
+net spindle-speed-limited  =>  spindle.0.speed-out-rps => spindle.0.speed-in
+
+# the unlink pin commands are only used, because they are connected 
+# in core_sim.hal and we use this file to simulate
+unlinkp iocontrol.0.tool-change
+unlinkp iocontrol.0.tool-changed
+unlinkp iocontrol.0.tool-prep-number
+
+net tool-change      hal_manualtoolchange.change   <=  iocontrol.0.tool-change 
+net tool-changed     hal_manualtoolchange.changed  <=  iocontrol.0.tool-changed
+net tool-prep-number hal_manualtoolchange.number   <=  iocontrol.0.tool-prep-number
+
+# external offset spindle auto raise on pause
+net spindle-pause     qtdragon.spindle-inhibit       =>   spindle.0.inhibit
+net eoffset_clear     qtdragon.eoffset-clear         =>   axis.z.eoffset-clear
+net eoffset_count     qtdragon.eoffset-spindle-count =>   axis.z.eoffset-counts
+net eoffset           qtdragon.eoffset-value         <=   axis.z.eoffset
+net eoffset-state     qtdragon.eoffset-is-active     <=   motion.eoffset-active
+
+setp axis.z.eoffset-enable 1
+setp axis.z.eoffset-scale 1.0
+

configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini

@@ -0,0 +1,257 @@
+# This file was created with the 7i96 Wizard on Jun 10 2019 11:12:47
+# Changes to most things are ok and will be read by the wizard
+
+[EMC]
+VERSION = 1.1
+MACHINE = qtdragon
+DEBUG = 0x00000000
+
+[DISPLAY]
+# sets qtdragon as screen. for debug output to terminal add -d or -v
+# sets window title
+# sets icon in task manager
+DISPLAY = qtvcp qtdragon
+TITLE = QtDragon XYZA Rotational Axis
+ICON = silver_dragon.png
+
+# qtdragon saves most preference to this file
+PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+
+# min/max percentage overrides allowed in qtdragon 1 = 100%
+MAX_FEED_OVERRIDE       = 1.2
+MIN_SPINDLE_0_OVERRIDE    = 0.5
+MAX_SPINDLE_0_OVERRIDE    = 1.2
+
+# manual spindle speed will start at this RPM
+DEFAULT_SPINDLE_0_SPEED   = 12000
+
+# spindle up/down increment in RPM
+SPINDLE_INCREMENT = 200
+
+# min max apindle speed manually allowed 
+MIN_SPINDLE_0_SPEED = 1000
+MAX_SPINDLE_0_SPEED = 20000
+
+# max spindle power in Watts
+MAX_SPINDLE_POWER = 2000
+
+# min/max/default jog velocities in qtdragon in units/sec
+MIN_LINEAR_VELOCITY     = 0
+MAX_LINEAR_VELOCITY     = 60.00
+DEFAULT_LINEAR_VELOCITY = 25.0
+
+DEFAULT_ANGULAR_VELOCITY = 10
+MIN_ANGULAR_VELOCITY = 1
+MAX_ANGULAR_VELOCITY = 360
+
+# incremental jog step length options
+INCREMENTS = 10 mm, 1.0 mm, 0.10 mm, 0.01 mm, 1.0 inch, 0.1 inch, 0.01 inch
+ANGULAR_INCREMENTS = 0.1 deg, 1 deg, 10 deg, 22.5 deg, 30 deg, 45 deg, 90 deg
+
+# Display grid increments
+GRIDS = 0, .1 mm, 1 mm, 2 mm, 5 mm, 10 mm, .25 in, .5 in
+
+CYCLE_TIME = 100
+INTRO_GRAPHIC = silver_dragon.png
+INTRO_TIME = 2
+
+# default program search path
+PROGRAM_PREFIX = ~/linuxcnc/nc_files
+
+# NGCGUI subroutine path.
+# Thr path must also  be in [RS274NGC] SUBROUTINE_PATH
+NGCGUI_SUBFILE_PATH = ../../../nc_files/ngcgui_lib/
+# pre selected programs tabs
+# specify filenames only, files must be in the NGCGUI_SUBFILE_PATH
+NGCGUI_SUBFILE = slot.ngc
+NGCGUI_SUBFILE = qpocket.ngc
+
+# qtdragon saves MDI cxommands to this file
+MDI_HISTORY_FILE = mdi_history.dat
+# qtdragon saves rnning logs to this file
+LOG_FILE = qtdragon.log
+
+[MDI_COMMAND_LIST]
+# for macro buttons on main oage up to 10 possible
+MDI_COMMAND_MACRO0 = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+MDI_COMMAND_MACRO1 = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[FILTER]
+# Controls what programs are shown inqtdragon file manager
+PROGRAM_EXTENSION = .ngc,.nc,.tap G-Code File (*.ngc,*.nc,*.tap)
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+
+# specifies what special 'filter' programs runs based on program ending
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python3
+
+[KINS]
+KINEMATICS = trivkins coordinates=XYZA
+JOINTS = 4
+
+[EMCIO]
+TOOL_TABLE = tool.tbl
+
+[RS274NGC]
+# motion controller saves parameters to this file
+PARAMETER_FILE = qtdragon.var
+
+# start up G/M codes when first loaded
+RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
+
+# subroutine/remap path list
+SUBROUTINE_PATH = ../../../../nc_files/probe/basic_probe/macros:~/linuxcnc/nc_files/examples/ngcgui_lib:~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs
+
+# on abort, this ngc file is called. required for basic/versa probe
+ON_ABORT_COMMAND=O <on_abort> call
+
+[EMCMOT]
+EMCMOT = motmod
+SERVO_PERIOD = 1000000
+COMM_TIMEOUT = 1.0
+COMM_WAIT = 0.010
+BASE_PERIOD = 100000
+#NUM_AIO = 12
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.010
+
+[TRAJ]
+COORDINATES = XYZA
+LINEAR_UNITS = metric
+ANGULAR_UNITS = degree
+MAX_LINEAR_VELOCITY = 60.00
+DEFAULT_LINEAR_VELOCITY = 50.00
+SPINDLES = 1
+
+[HAL]
+HALUI = halui
+# loads the HAL machine simulation
+HALFILE = gantrysim.hal
+HALFILE = simulated-gantry-home.hal
+
+# this file is loaded after qtdragon has made it's HAl pins
+# you can add multiple entries
+POSTGUI_HALFILE = qtdragon_postgui.hal
+
+# this command is run after qtdragon has made it's HAl pins
+# any HAL conmmand can be used
+# you can add multiple entries
+# uncomment this one to print all HAL pins that start with qt
+#POSTGUI_HALCMD = show pin qt
+
+[HALUI]
+# no content
+
+[PROBE]
+# pick basic probe or versa probe or remove for none
+#USE_PROBE = versaprobe
+USE_PROBE = basicprobe
+
+[AXIS_X]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Y]
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_Z]
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+
+[AXIS_A]
+MAX_VELOCITY = 60
+MAX_ACCELERATION = 500.0
+
+[JOINT_0]
+AXIS = X
+MIN_LIMIT = -0.001
+MAX_LIMIT = 520.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.000000
+HOME_LATCH_VEL = 10.000
+HOME_SEQUENCE = 2
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_1]
+AXIS = Y
+MIN_LIMIT = -0.001
+MAX_LIMIT = 630.0
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 72.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = 20.0
+HOME_OFFSET = -0.1
+HOME_SEARCH_VEL = -20.00
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = -1
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_2]
+AXIS = Z
+MIN_LIMIT = -115.0
+MAX_LIMIT = 10.0
+MAX_VELOCITY = 40.0
+MAX_ACCELERATION = 500.0
+TYPE = LINEAR
+SCALE = 160.0
+STEPGEN_MAX_VEL = 48.0
+STEPGEN_MAX_ACC = 600.0
+FERROR = 1.0
+MIN_FERROR = 0.5
+MAX_OUTPUT = 0
+MAX_ERROR = 0.0127
+HOME = -10.0
+HOME_OFFSET = 0.1
+HOME_SEARCH_VEL = 20.000000
+HOME_LATCH_VEL = 10.00
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+
+[JOINT_3]
+TYPE = ANGULAR
+MAX_VELOCITY = 60.0
+MAX_ACCELERATION = 500.0
+INPUT_SCALE = 40
+OUTPUT_SCALE = 1.0
+FERROR = 5.0
+MIN_FERROR = 1.0
+HOME = 0
+HOME_SEARCH_VEL = 0.0
+HOME_LATCH_VEL = 0.0
+HOME_SEQUENCE = 0
+HOME_USE_INDEX = False
+HOME_IGNORE_LIMITS = False
+

configs/sim/qtdragon/qtdragon_xyz/tool.tbl

@@ -0,0 +1,5 @@
+T10 P0 X0 Y0 Z0 A0 B0 C0 U0 V0 W0 D0 I0 J0 Q0 ;New Tool 
+T1 P1 X0 Y0 Z0.51100 A0 B0 C0 U0 V0 W0 D10.00000 I0 J0 Q0 ;1/8 end mill 
+T2 P2 X0 Y0 Z0.10000 A0 B0 C0 U0 V0 W0 D0.06250 I0 J0 Q0 ;1/16 end mill 
+T3 P3 X0 Y0 Z1.27300 A0 B0 C0 U0 V0 W0 D0.20100 I0 J0 Q0 ;#7 tap drill 
+T4 P4 X0 Y0 Z3.00000 A0 B0 C0 U0 V0 W0 D4.00000 I0 J0 Q0 ;4" Face Mill