Import LinuxCNC source tree

configs/sim/axis/xhc-hb04/layout2.inc

@@ -0,0 +1,72 @@
+[XHC_HB04_BUTTONS]
+# use button names according to layout file LIB:xhc-hb04-layout{n}.cfg
+# note: "start-pause" is connected for standard behavior
+#        controlling halui.pause/halui.resume/halui.run
+# these are examples, edit as required:
+
+goto-zero   = halui.mdi-command-00
+# synthesized per-axis buttons for goto-zero button:
+goto-zero-x = ""
+goto-zero-y = ""
+goto-zero-z = ""
+goto-zero-a = ""
+
+start-pause = std_start_pause
+rewind      = halui.program.step
+# probe-input for simulating a probe:
+probe-z     = motion.probe-input
+macro-3     = halui.mdi-command-03
+
+half        = halui.spindle.0.stop
+# synthesized per-axis buttons for half button:
+half-x      = ""
+half-y      = ""
+half-z      = ""
+half-a      = ""
+
+zero        = ""
+# synthesized per-axis buttons for zero button:
+zero-x      = halui.mdi-command-12
+zero-y      = halui.mdi-command-13
+zero-z      = halui.mdi-command-14
+zero-a      = halui.mdi-command-15
+
+safe-z      = halui.mdi-command-10
+# in this sim, home-all only works first time, hold down till finished:
+home        = halui.home-all
+macro-1     = halui.mdi-command-01
+macro-2     = halui.mdi-command-02
+spindle     = halui.spindle.0.start
+step        = xhc-hb04.stepsize-up
+mode        = ""
+macro-6     = halui.mdi-command-06
+macro-7     = halui.mdi-command-07
+stop        = halui.program.stop
+reset       = halui.estop.activate
+
+[HALUI]
+# these are examples, edit as required:
+# a halui hal pin is created for each MDI_COMMAND below
+# halui.mdi-command-00, halui.mdi-command-01,... etc
+MDI_COMMAND=G0 X0 Y0 Z0
+MDI_COMMAND=(debug, example: mdi-01)
+MDI_COMMAND=(debug, example: mdi-02)
+#03 M110: clears notifications
+MDI_COMMAND=M110
+MDI_COMMAND=(debug, example: mdi-04)
+MDI_COMMAND=(debug, example: mdi-05)
+MDI_COMMAND=(debug, example: mdi-06)
+#07 M101: example print to stdout
+MDI_COMMAND=M101
+MDI_COMMAND=(debug, example: mdi-08)
+MDI_COMMAND=(debug, example: mdi-09)
+MDI_COMMAND=(debug, example: mdi-10)
+MDI_COMMAND=(debug, example: mdi-11)
+#12
+MDI_COMMAND= G10 L20 P0 X0
+#13
+MDI_COMMAND= G10 L20 P0 Y0
+#14
+MDI_COMMAND= G10 L20 P0 Z0
+#15
+MDI_COMMAND= G10 L20 P0 C0