Import LinuxCNC source tree
This commit is contained in:
Wang Dequan
195
configs/by_interface/pluto/pluto_inch/pluto_inch.ini
Normal file
195
configs/by_interface/pluto/pluto_inch/pluto_inch.ini
Normal file
@@ -0,0 +1,195 @@
|
||||
# EMC controller parameters for generic controller. Make these what you need
|
||||
# for your system.
|
||||
# General note: Comments can either be preceded with a # or ; - either is
|
||||
# acceptable, although # is in keeping with most linux config files.
|
||||
# Settings with a + at the front of the comment are likely needed to get
|
||||
# changed by the user.
|
||||
# Settings with a - at the front are highly unneeded to be changed
|
||||
###############################################################################
|
||||
# General section
|
||||
###############################################################################
|
||||
|
||||
[EMC]
|
||||
#- Version of this INI file
|
||||
VERSION = 1.1
|
||||
#+ Name of machine, for use with display, etc.
|
||||
MACHINE = LinuxCNC-HAL-STEP-PLUTO
|
||||
#+ Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
|
||||
DEBUG = 0
|
||||
# DEBUG = 0x00000007
|
||||
# DEBUG = 0x7FFFFFFF
|
||||
###############################################################################
|
||||
# Sections for display options
|
||||
###############################################################################
|
||||
|
||||
[DISPLAY]
|
||||
DISPLAY = axis
|
||||
# Cycle time, in seconds, that display will sleep between polls
|
||||
CYCLE_TIME = 0.200
|
||||
#- Path to help file
|
||||
HELP_FILE = doc/help.txt
|
||||
#- Initial display setting for position, RELATIVE or MACHINE
|
||||
POSITION_OFFSET = RELATIVE
|
||||
#- Initial display setting for position, COMMANDED or ACTUAL
|
||||
POSITION_FEEDBACK = ACTUAL
|
||||
#+ Highest value that will be allowed for feed override, 1.0 = 100%
|
||||
MAX_FEED_OVERRIDE = 1.2
|
||||
#- Prefix to be used
|
||||
PROGRAM_PREFIX = ../../nc_files/
|
||||
#- Introductory graphic
|
||||
INTRO_GRAPHIC = linuxcnc.gif
|
||||
INTRO_TIME = 5
|
||||
# Editor to be used with Axis
|
||||
#EDITOR = geany
|
||||
###############################################################################
|
||||
# Task controller section
|
||||
###############################################################################
|
||||
|
||||
[FILTER]
|
||||
#No Content
|
||||
|
||||
[RS274NGC]
|
||||
#- File containing interpreter variables
|
||||
PARAMETER_FILE = stepper.var
|
||||
###############################################################################
|
||||
# Motion control section
|
||||
###############################################################################
|
||||
|
||||
[EMCMOT]
|
||||
#- Name of the motion controller to use (only one exists for nontrivkins)
|
||||
EMCMOT = motmod
|
||||
#- Timeout for comm to emcmot, in seconds
|
||||
COMM_TIMEOUT = 1.0
|
||||
#- Servo task period, in nanosecs
|
||||
SERVO_PERIOD = 1000000
|
||||
###############################################################################
|
||||
# Hardware Abstraction Layer section
|
||||
###############################################################################
|
||||
|
||||
[TASK]
|
||||
# Name of task controller program, e.g., milltask
|
||||
TASK = milltask
|
||||
#- Cycle time, in seconds, that task controller will sleep between polls
|
||||
CYCLE_TIME = 0.010
|
||||
###############################################################################
|
||||
# Part program interpreter section
|
||||
###############################################################################
|
||||
|
||||
[HAL]
|
||||
# The run script first uses halcmd to execute any HALFILE
|
||||
# files, and then to execute any individual HALCMD commands.
|
||||
#
|
||||
# list of hal config files to run through halcmd
|
||||
#+ files are executed in the order in which they appear
|
||||
HALFILE = pluto_pinout.hal
|
||||
HALFILE =
|
||||
#- list of halcmd commands to execute
|
||||
# commands are executed in the order in which they appear
|
||||
#HALCMD = save neta
|
||||
###############################################################################
|
||||
# Trajectory planner section
|
||||
###############################################################################
|
||||
|
||||
[HALUI]
|
||||
#No Content
|
||||
|
||||
[TRAJ]
|
||||
#+ machine specific settings
|
||||
# COORDINATES = X Y Z A B C
|
||||
COORDINATES = X Y Z
|
||||
HOME = 0 0 0
|
||||
LINEAR_UNITS = inch
|
||||
ANGULAR_UNITS = degree
|
||||
DEFAULT_LINEAR_VELOCITY = 1.2
|
||||
MAX_LINEAR_VELOCITY = 1.2
|
||||
DEFAULT_LINEAR_ACCELERATION = 15.0
|
||||
MAX_LINEAR_ACCELERATION = 20.0
|
||||
###############################################################################
|
||||
# Axes sections
|
||||
###############################################################################
|
||||
#+ First axis
|
||||
|
||||
[EMCIO]
|
||||
#- tool table file
|
||||
TOOL_TABLE = stepper.tbl
|
||||
|
||||
[KINS]
|
||||
KINEMATICS = trivkins
|
||||
JOINTS = 3
|
||||
|
||||
[AXIS_X]
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
MAX_VELOCITY = .5667
|
||||
MAX_ACCELERATION = 20.0
|
||||
|
||||
[JOINT_0]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.000
|
||||
MAX_VELOCITY = .5667
|
||||
MAX_ACCELERATION = 20.0
|
||||
BACKLASH = 0.000
|
||||
SCALE = 6400
|
||||
OUTPUT_SCALE = 1.000
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
FERROR = 0.050
|
||||
MIN_FERROR = 0.010
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
#+ Second axis
|
||||
|
||||
[AXIS_Y]
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
MAX_VELOCITY = .5667
|
||||
MAX_ACCELERATION = 20.0
|
||||
|
||||
[JOINT_1]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.000
|
||||
MAX_VELOCITY = .5667
|
||||
MAX_ACCELERATION = 20.0
|
||||
BACKLASH = 0.000
|
||||
SCALE = 6400
|
||||
OUTPUT_SCALE = 1.000
|
||||
MIN_LIMIT = -10.0
|
||||
MAX_LIMIT = 10.0
|
||||
FERROR = 0.050
|
||||
MIN_FERROR = 0.010
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
#+ Third axis
|
||||
|
||||
[AXIS_Z]
|
||||
MIN_LIMIT = -2.0
|
||||
MAX_LIMIT = 4.0
|
||||
MAX_VELOCITY = .3667
|
||||
MAX_ACCELERATION = 15.0
|
||||
|
||||
[JOINT_2]
|
||||
TYPE = LINEAR
|
||||
HOME = 0.0
|
||||
MAX_VELOCITY = .3667
|
||||
MAX_ACCELERATION = 15.0
|
||||
BACKLASH = 0.000
|
||||
SCALE = 8000
|
||||
OUTPUT_SCALE = 1.000
|
||||
MIN_LIMIT = -2.0
|
||||
MAX_LIMIT = 4.0
|
||||
FERROR = 0.050
|
||||
MIN_FERROR = 0.010
|
||||
HOME_OFFSET = 0.0
|
||||
HOME_SEARCH_VEL = 0.0
|
||||
HOME_LATCH_VEL = 0.0
|
||||
HOME_USE_INDEX = NO
|
||||
HOME_IGNORE_LIMITS = NO
|
||||
###############################################################################
|
||||
# section for main IO controller parameters
|
||||
###############################################################################
|
||||
40
configs/by_interface/pluto/pluto_inch/pluto_pinout.hal
Normal file
40
configs/by_interface/pluto/pluto_inch/pluto_pinout.hal
Normal file
@@ -0,0 +1,40 @@
|
||||
# first load the core RT modules that will be needed
|
||||
# kinematics
|
||||
loadrt [KINS]KINEMATICS
|
||||
# motion controller, get name and thread periods from ini file
|
||||
loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS
|
||||
|
||||
loadrt pluto_step
|
||||
addf pluto-step.read servo-thread
|
||||
addf motion-command-handler servo-thread
|
||||
addf motion-controller servo-thread
|
||||
addf pluto-step.write servo-thread
|
||||
|
||||
setp pluto-step.stepgen.0.scale [JOINT_0]SCALE
|
||||
setp pluto-step.stepgen.1.scale [JOINT_1]SCALE
|
||||
setp pluto-step.stepgen.2.scale [JOINT_2]SCALE
|
||||
|
||||
net Xpos-cmd joint.0.motor-pos-cmd => pluto-step.stepgen.0.position-cmd
|
||||
net Ypos-cmd joint.1.motor-pos-cmd => pluto-step.stepgen.1.position-cmd
|
||||
net Zpos-cmd joint.2.motor-pos-cmd => pluto-step.stepgen.2.position-cmd
|
||||
|
||||
net Xpos-fb pluto-step.stepgen.0.position-fb => joint.0.motor-pos-fb
|
||||
net Ypos-fb pluto-step.stepgen.1.position-fb => joint.1.motor-pos-fb
|
||||
net Zpos-fb pluto-step.stepgen.2.position-fb => joint.2.motor-pos-fb
|
||||
|
||||
net Xen joint.0.amp-enable-out => pluto-step.stepgen.0.enable
|
||||
net Yen joint.1.amp-enable-out => pluto-step.stepgen.1.enable
|
||||
net Zen joint.2.amp-enable-out => pluto-step.stepgen.2.enable
|
||||
|
||||
# create a signal for the estop loopback
|
||||
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
|
||||
|
||||
# create signals for tool prepare loopback
|
||||
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
|
||||
|
||||
# create a signal for "spindle on"
|
||||
net spindle_on spindle.0.on => pluto-step.dout.00
|
||||
|
||||
setp pluto-step.stepgen.steplen 20000
|
||||
setp pluto-step.stepgen.stepspace 20000
|
||||
setp pluto-step.stepgen.dirtime 20000
|
||||
Reference in New Issue
Block a user