wangdequan/linuxcncAllWasm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Import LinuxCNC source tree

Browse Source
This commit is contained in:
Wang Dequan
2026-08-20 06:17:39 +08:00
commit 2c814634c3
9429 changed files with 10556013 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
configs/by_interface/mesa/hm2-stepper/README Normal file
View File

@@ -0,0 +1,15 @@
This configuration drives a 3-axis stepper machine using a Mesa Anything IO board with the HostMot2 firmware. No limit switches are used, so this should work with very basic hardware. The config will only run if you have the card installed and have installed the firmware.
See LinuxCNC_Documentation.pdf - 11.4 Mesa HostMot2 Driver section for more information.
These configs have 0 Encoders, 0 PWMs, and 3 StepGens
5i22-big For the 1.5M gate version
5i22-small For the 1.0M gate version
7i43-big For the 400k gate version
7i43-small For the 200k gate version
3x20-small For the 1.0M gate version