wangdequan
232f42f45a
结论：已继续补齐 LinuxCNC 源码派生的 genhexkins 与 pentakins 原生 runtime baseline，构建、vendor 同步、语义守卫和 native probe 验证均通过。
67 lines
3.3 KiB
Markdown
67 lines
3.3 KiB
Markdown
# Drift Report
|
|
|
|
## Current Status
|
|
|
|
As of the current upstream baseline, no byte-level drift is allowed between
|
|
files listed in `tools/source-manifest.txt` and the matching files under
|
|
`../linuxcnc/`.
|
|
|
|
The enforced upstream baseline is:
|
|
|
|
```text
|
|
60597ee0718873d2449058c824262a275e5e4bad
|
|
```
|
|
|
|
`tools/verify_vendor_sync.sh` enforces this by comparing every manifest file
|
|
against upstream during native validation.
|
|
|
|
## Allowed Standalone Boundaries
|
|
|
|
The following differences are intentional runtime boundaries, not LinuxCNC
|
|
semantic rewrites:
|
|
|
|
| Boundary | Standalone treatment |
|
|
| --- | --- |
|
|
| RTAPI | Minimal compatibility shim in `runtime/core/shims/rtapi.h`. |
|
|
| HAL lookup | Standalone HAL adapter for `_hal[...]` named parameter reads. |
|
|
| INI lookup | Standalone INI adapter around vendored LinuxCNC INI parser behavior. |
|
|
| Canonical output | Canonical calls are captured as test events instead of driving hardware. |
|
|
| Python/remap | Python/remap hooks are stubbed at the runtime edge. |
|
|
| Dynamic interpreter path | `interp_base.cc` probe uses standalone `EMC2_HOME` compile-time path boundary. |
|
|
| Realtime scheduler | TP probes seed deterministic status/config data instead of running LinuxCNC realtime process topology. |
|
|
| Kinematics component lifecycle | Kinematics modules are initialized through LinuxCNC module entry points where native runtime probes exist, while HAL component init/ready/exit, HAL pin allocation, and RTAPI module metadata are handled by standalone shims. |
|
|
| Go math C/C++ linkage | `genserkins` runtime probing compiles vendored `gomath.c` through a narrow C++ wrapper so LinuxCNC `genserfuncs.c` can link to the upstream Go math symbols without editing vendored source. |
|
|
| Switchkins iterative forward | `genhexkins` runtime probing follows LinuxCNC switchkins iterative-forward behavior, including the first-call warmup path before asserting roundtrip convergence. |
|
|
| Browser storage | OPFS remains outside the native core and is not yet connected. |
|
|
|
|
## Enforced Non-Drift Rules
|
|
|
|
- Do not edit `../linuxcnc/`.
|
|
- Do not patch vendored files without adding a patch under `patches/` and
|
|
documenting the reason.
|
|
- Do not add standalone `Interp::convert_g()`.
|
|
- Do not add `.c` or `.cc` manifest files without a source compile probe.
|
|
- Do not sync from a different upstream commit without updating
|
|
`tools/upstream-baseline.txt` and `docs/scope-and-baseline.md`.
|
|
|
|
## Known Gaps
|
|
|
|
- No browser/WASM parity tests yet.
|
|
- No JS SDK validation yet.
|
|
- No OPFS persistence validation yet.
|
|
- Identity/trivial, `5axiskins`, TRT `xyzac`/`xyzbc`, delta, SCARA, PUMA,
|
|
serial, hexapod, pentapod, and related kinematics sources now have native
|
|
source-probe coverage.
|
|
- Full machine baselines beyond the current identity/trivial, `5axiskins`,
|
|
TRT, delta, SCARA, PUMA, serial `genserkins`, hexapod `genhexkins`,
|
|
pentapod `pentakins`, and other existing runtime probes are not established.
|
|
- Fixture expectations are currently checked against the standalone vendored
|
|
source path, not by running a native LinuxCNC binary for every fixture.
|
|
|
|
## Current Drift Conclusion
|
|
|
|
Within the native extracted-core scope, the port currently has no permitted
|
|
byte-level drift from vendored LinuxCNC source files. All current behavior
|
|
coverage is guarded by upstream baseline validation, vendor sync validation,
|
|
source compile probes, native harnesses, and fixture checks.
|