feat: close ordered pairs and property codec batches
This commit is contained in:
@@ -6,6 +6,13 @@ const root = resolve(new URL('..', import.meta.url).pathname)
|
||||
const report = JSON.parse(await readFile(resolve(root, 'config/freecad-ordered-operation-pair-classification.json'), 'utf8'))
|
||||
const fail = (message) => { throw new Error(`FreeCAD ordered operation pair classification: ${message}`) }
|
||||
const sha256 = (value) => createHash('sha256').update(value).digest('hex')
|
||||
const summariesMatchWithinTolerance = (left, right, tolerance = 1e-6) => (
|
||||
left?.isValid === right?.isValid
|
||||
&& ['solids', 'faces', 'edges', 'vertices'].every((key) => left?.[key] === right?.[key])
|
||||
&& ['volume', 'area'].every((key) => Math.abs(left?.[key] - right?.[key]) <= tolerance)
|
||||
&& left?.bounds?.length === right?.bounds?.length
|
||||
&& left.bounds.every((value, index) => Math.abs(value - right.bounds[index]) <= tolerance)
|
||||
)
|
||||
if (report.schemaVersion !== 1 || report.baseline?.freecadVersion !== '1.1.1' || report.baseline.commit !== '0108fd4b4850cc46e625b60e53cea7a7bbe69f8d' || !/^8\./.test(report.baseline.occtVersion)) fail('baseline is invalid.')
|
||||
for (const harness of [report.nativeProbe?.executor, report.nativeProbe?.matrix, report.nativeProbe?.resave]) {
|
||||
const path = resolve(root, harness?.path ?? '')
|
||||
@@ -227,6 +234,154 @@ const expectedPairs = [
|
||||
{ pair: 'chamfer->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'chamfer->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'chamfer->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'chamfer->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'chamfer->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'chamfer->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'chamfer->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'chamfer->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'chamfer->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'chamfer->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'chamfer->fillet', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freecadProfileAccepted: true, wasmCrashSignature: 'memory access out of bounds' },
|
||||
{ pair: 'chamfer->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'BRep_API: command not done', wasmCrashSignature: 'memory access out of bounds' },
|
||||
{ pair: 'chamfer->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'chamfer->draft', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5], nativeTypeId: 'PartDesign::Draft', freeCadDiagnostic: '', inputShapeTransfer: 'partdesign-feature-summary-exact-with-explicit-brep-drift' },
|
||||
{ pair: 'chamfer->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
||||
{ pair: 'chamfer->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'chamfer->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'chamfer->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [6, 7, 6] },
|
||||
{ pair: 'chamfer->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'hole->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'hole->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'hole->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'hole->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'hole->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'hole->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'hole->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'hole->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'hole->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'hole->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'hole->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'hole->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'hole->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'hole->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'hole->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
||||
{ pair: 'hole->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'hole->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'hole->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [6, 7, 6] },
|
||||
{ pair: 'hole->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'draft->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'draft->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'draft->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'draft->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'draft->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'draft->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'draft->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'draft->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'draft->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'draft->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'draft->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'draft->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'draft->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'draft->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'draft->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
||||
{ pair: 'draft->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'draft->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'draft->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'draft->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'thickness->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'thickness->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'thickness->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'thickness->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'thickness->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'thickness->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'thickness->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'thickness->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'thickness->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'thickness->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'thickness->fillet', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freecadProfileAccepted: true, freecadSelectedEdges: [1], wasmCrashSignature: 'null function or function signature mismatch' },
|
||||
{ pair: 'thickness->chamfer', decision: 'rejected', reasonCode: 'native-builder-cpp-exception-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freecadProfileAccepted: true, freecadSelectedEdges: [1] },
|
||||
{ pair: 'thickness->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'thickness->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'thickness->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true },
|
||||
{ pair: 'thickness->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'thickness->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'thickness->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'thickness->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'linear-pattern->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [16, 15, 16] },
|
||||
{ pair: 'linear-pattern->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'linear-pattern->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [10, 9, 10] },
|
||||
{ pair: 'linear-pattern->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'linear-pattern->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'linear-pattern->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'linear-pattern->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'linear-pattern->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'linear-pattern->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'linear-pattern->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'linear-pattern->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'linear-pattern->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'linear-pattern->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'linear-pattern->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'linear-pattern->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
||||
{ pair: 'linear-pattern->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'linear-pattern->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'linear-pattern->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'linear-pattern->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'polar-pattern->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'polar-pattern->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'polar-pattern->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'polar-pattern->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'polar-pattern->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'polar-pattern->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'polar-pattern->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'polar-pattern->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'polar-pattern->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'BRep_API: command not done' },
|
||||
{ pair: 'polar-pattern->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'polar-pattern->fillet', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freeCadDiagnostic: 'BRep_API: command not done', freecadSelectedEdges: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26], wasmCrashSignature: 'null function or function signature mismatch' },
|
||||
{ pair: 'polar-pattern->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'BRep_API: command not done', freecadSelectedEdges: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26] },
|
||||
{ pair: 'polar-pattern->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'polar-pattern->draft', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5], nativeTypeId: 'PartDesign::Draft', freeCadDiagnostic: '', inputShapeTransfer: 'partdesign-feature-summary-exact-with-explicit-brep-drift' },
|
||||
{ pair: 'polar-pattern->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization', kernelNoOpComparison: 'topology-and-metrics-within-1e-6' },
|
||||
{ pair: 'polar-pattern->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'polar-pattern->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'polar-pattern->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'polar-pattern->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'mirrored->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
||||
{ pair: 'mirrored->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'mirrored->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
||||
{ pair: 'mirrored->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'mirrored->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'mirrored->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'mirrored->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'mirrored->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'mirrored->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
||||
{ pair: 'mirrored->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'mirrored->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'mirrored->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'mirrored->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'mirrored->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'mirrored->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
||||
{ pair: 'mirrored->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'mirrored->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'mirrored->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'multi-transform->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [16, 15, 16] },
|
||||
{ pair: 'multi-transform->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
||||
{ pair: 'multi-transform->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [10, 9, 10] },
|
||||
{ pair: 'multi-transform->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
||||
{ pair: 'multi-transform->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
||||
{ pair: 'multi-transform->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
||||
{ pair: 'multi-transform->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
||||
{ pair: 'multi-transform->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
||||
{ pair: 'multi-transform->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'BRep_API: command not done' },
|
||||
{ pair: 'multi-transform->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
||||
{ pair: 'multi-transform->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'multi-transform->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
||||
{ pair: 'multi-transform->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
||||
{ pair: 'multi-transform->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
||||
{ pair: 'multi-transform->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
||||
{ pair: 'multi-transform->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
||||
{ pair: 'multi-transform->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
||||
{ pair: 'multi-transform->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
||||
{ pair: 'multi-transform->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
||||
]
|
||||
if (report.nativeProbe?.artifacts?.length !== 3 || report.classifications?.length !== expectedPairs.length) fail('native artifacts or classification prefix is incomplete.')
|
||||
for (const [index, entry] of report.classifications.entries()) {
|
||||
@@ -251,16 +406,22 @@ for (const [index, entry] of report.classifications.entries()) {
|
||||
for (const [attemptIndex, attempt] of rejection.kernelAttempts.entries()) {
|
||||
const validKernelShape = expected.kernelOutcome !== 'invalid-result'
|
||||
const expectedAuthority = expected.kernelOutcome === 'no-op' ? 'kernel-no-op' : expected.kernelOutcome === 'accepted' ? 'kernel-superset-only' : 'kernel-invalid-result'
|
||||
if (attempt.operation !== secondOperation || attempt.builder !== expected.secondBuilder || attempt.inputCount !== expected.secondInputCount || attempt.parameter !== expected.mutationParameter || attempt.parameterValue !== expected.mutationTrajectory[attemptIndex] || attempt.runtime !== 'occt-native' || attempt.outcome !== expected.kernelOutcome || attempt.resultProduced !== true || attempt.shapeProduced !== true || attempt.validShapeProduced !== validKernelShape || attempt.historyProduced !== true || attempt.historyProvider !== 'occt-native' || attempt.summary?.isValid !== validKernelShape || attempt.historyRecords < 1 || !attempt.historySha256 || attempt.authority !== expectedAuthority || (expected.kernelOutcome === 'no-op' && JSON.stringify(attempt.summary) !== JSON.stringify(entry.first.summary))) fail(`${expected.pair} OCCT compatibility attempt ${attemptIndex} is invalid.`)
|
||||
const tolerantNoOp = expected.kernelNoOpComparison === 'topology-and-metrics-within-1e-6'
|
||||
const noOpMatchesInput = tolerantNoOp
|
||||
? attempt.noOpComparison === expected.kernelNoOpComparison && summariesMatchWithinTolerance(attempt.summary, entry.first.summary)
|
||||
: JSON.stringify(attempt.summary) === JSON.stringify(entry.first.summary)
|
||||
if (attempt.operation !== secondOperation || attempt.builder !== expected.secondBuilder || attempt.inputCount !== expected.secondInputCount || attempt.parameter !== expected.mutationParameter || attempt.parameterValue !== expected.mutationTrajectory[attemptIndex] || attempt.runtime !== 'occt-native' || attempt.outcome !== expected.kernelOutcome || attempt.resultProduced !== true || attempt.shapeProduced !== true || attempt.validShapeProduced !== validKernelShape || attempt.historyProduced !== true || attempt.historyProvider !== 'occt-native' || attempt.summary?.isValid !== validKernelShape || attempt.historyRecords < 1 || !attempt.historySha256 || attempt.authority !== expectedAuthority || (expected.kernelOutcome === 'no-op' && !noOpMatchesInput)) fail(`${expected.pair} OCCT compatibility attempt ${attemptIndex} is invalid.`)
|
||||
}
|
||||
}
|
||||
const persistence = rejection.persistence
|
||||
const diagnostic = persistence?.diagnostic
|
||||
const freecadProfileAccepted = expected.freecadProfileAccepted === true
|
||||
const freecadProfileNoOp = expected.freecadProfileNoOp === true
|
||||
const persistenceChecksPass = Object.values(persistence?.checks ?? {}).every(Boolean) || (freecadProfileAccepted && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'nativeFeatureRejected').every(([, value]) => value === true)) || (freecadProfileNoOp && persistence?.checks?.freecadProfileNoOp === true && persistence?.checks?.freecadProfileAccepted === false && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => !['nativeFeatureRejected', 'freecadProfileAccepted'].includes(key)).every(([, value]) => value === true)) || (!freecadProfileAccepted && !freecadProfileNoOp && persistence?.checks?.nativeFeatureRejected === true && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'freecadProfileAccepted').every(([, value]) => value === true))
|
||||
const noOpSourceBrepReserialized = expected.rollbackShape === 'geometry-and-summary-exact-with-explicit-brep-reserialization' && persistence?.checks?.sourceShapeRestored === false && persistence?.checks?.sourceShapeSummaryRestored === true && persistence?.checks?.sourceShapeGeometricallyRestored === true && persistence?.rollback?.sourceBrepReserialized === true
|
||||
const persistenceChecksPass = Object.values(persistence?.checks ?? {}).every(Boolean) || (freecadProfileAccepted && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'nativeFeatureRejected').every(([, value]) => value === true)) || (freecadProfileNoOp && persistence?.checks?.freecadProfileNoOp === true && persistence?.checks?.freecadProfileAccepted === false && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => !['nativeFeatureRejected', 'freecadProfileAccepted', ...(noOpSourceBrepReserialized ? ['sourceShapeRestored'] : [])].includes(key)).every(([, value]) => value === true)) || (!freecadProfileAccepted && !freecadProfileNoOp && persistence?.checks?.nativeFeatureRejected === true && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'freecadProfileAccepted').every(([, value]) => value === true))
|
||||
if (persistence?.status !== 'pass' || persistence.decision !== 'rejected' || persistence.pair !== entry.pair || persistence.operation !== secondOperation || persistence.nativeTypeId !== expected.nativeTypeId || persistence.freecadVersion !== '1.1.1' || !persistenceChecksPass) fail(`${expected.pair} FCStd rejection evidence is incomplete.`)
|
||||
if (diagnostic?.nativeTypeId !== expected.nativeTypeId || diagnostic.parameter?.name !== expected.mutationParameter || diagnostic.parameter.value !== expected.mutationTrajectory[0] || diagnostic.inputShape?.solids !== 1 || diagnostic.recomputeResult !== true || !diagnostic.objects?.some(({ name, typeId }) => name === 'PairResult' && typeId === expected.nativeTypeId)) fail(`${expected.pair} did not capture a real FreeCAD profile evaluation.`)
|
||||
if (expected.freecadSelectedEdges && JSON.stringify(diagnostic.input?.selectedEdges) !== JSON.stringify(expected.freecadSelectedEdges)) fail(`${expected.pair} FreeCAD selected-edge fixture changed.`)
|
||||
if (freecadProfileNoOp) {
|
||||
if (diagnostic.shapeNull !== false || diagnostic.shapeValid !== true || diagnostic.statusString !== 'Valid' || !diagnostic.state?.includes('Up-to-date') || JSON.stringify(diagnostic.resultShape) !== JSON.stringify(diagnostic.inputShape)) fail(`${expected.pair} FreeCAD no-op evidence is incomplete.`)
|
||||
} else if (freecadProfileAccepted) {
|
||||
@@ -273,7 +434,14 @@ for (const [index, entry] of report.classifications.entries()) {
|
||||
const input = diagnostic.input
|
||||
if (input?.name !== 'DraftBase' || input.typeId !== 'PartDesign::Feature' || JSON.stringify(input.subelements) !== JSON.stringify(['Face1']) || input.sourceName !== persistence.source?.name || input.shapeSummaryTransferredExactly !== true || typeof input.sourceBrepSha256 !== 'string' || typeof input.draftBaseBrepSha256 !== 'string' || input.sourceBrepSha256 === input.draftBaseBrepSha256) fail(`${expected.pair} PartDesign input Shape transfer evidence is incomplete.`)
|
||||
}
|
||||
if (persistence.source?.shape?.solids !== 1 || !persistence.source.shape.brepSha256 || JSON.stringify(persistence.rollback?.before) !== JSON.stringify(persistence.rollback?.after)) fail(`${expected.pair} abort did not restore the source object set and Shape.`)
|
||||
if (persistence.source?.shape?.solids !== 1 || !persistence.source.shape.brepSha256) fail(`${expected.pair} source Shape evidence is incomplete.`)
|
||||
if (expected.rollbackShape === 'geometry-and-summary-exact-with-explicit-brep-reserialization') {
|
||||
const before = persistence.rollback?.before
|
||||
const after = persistence.rollback?.after
|
||||
const symmetricDifference = persistence.rollback?.sourceShapeSymmetricDifference
|
||||
const withoutBrep = (shape) => Object.fromEntries(Object.entries(shape ?? {}).filter(([key]) => key !== 'brepSha256'))
|
||||
if (JSON.stringify(before?.objects) !== JSON.stringify(after?.objects) || JSON.stringify(withoutBrep(before?.sourceShape)) !== JSON.stringify(withoutBrep(after?.sourceShape)) || before?.sourceShape?.brepSha256 === after?.sourceShape?.brepSha256 || persistence.rollback?.sourceBrepReserialized !== true || persistence.rollback?.sourceShapeTopologicallyEqual !== false || symmetricDifference?.beforeMinusAfterVolume !== 0 || symmetricDifference?.afterMinusBeforeVolume !== 0 || persistence.checks.sourceShapeSummaryRestored !== true || persistence.checks.sourceShapeGeometricallyRestored !== true || persistence.checks.sourceShapeRestored !== false) fail(`${expected.pair} did not classify the source BREP reserialization precisely.`)
|
||||
} else if (JSON.stringify(persistence.rollback?.before) !== JSON.stringify(persistence.rollback?.after)) fail(`${expected.pair} abort did not restore the source object set and Shape.`)
|
||||
const phases = persistence.phases
|
||||
if (JSON.stringify(phases?.initial) !== JSON.stringify(phases?.reopened) || JSON.stringify(phases?.initial) !== JSON.stringify(phases?.resaved) || phases.initial.objects?.length !== persistence.rollback.before.objects.length || phases.initial.objects?.some(({ typeId }) => typeId === 'PartDesign::Body' || typeId === 'PartDesign::Pad' || typeId === 'Part::Loft' || typeId === 'Part::Revolution')) fail(`${expected.pair} polluted the clean FCStd save/reopen/resave chain.`)
|
||||
continue
|
||||
@@ -288,6 +456,6 @@ for (const [index, entry] of report.classifications.entries()) {
|
||||
const phases = entry.persistence.phases
|
||||
if (JSON.stringify(phases?.initial) !== JSON.stringify(phases?.reopened) || JSON.stringify(phases?.initial) !== JSON.stringify(phases?.resaved) || phases.initial.namingEvidenceSha256 !== entry.second.namingEvidenceSha256) fail(`${expected.pair} FCStd phases changed Shape or naming evidence.`)
|
||||
}
|
||||
const expectedSummary = { registeredOperations: 19, orderedPairs: 361, classifiedPairs: 209, accepted: 157, rejected: 52, unknown: 152 }
|
||||
const expectedSummary = { registeredOperations: 19, orderedPairs: 361, classifiedPairs: 357, accepted: 260, rejected: 97, unknown: 4 }
|
||||
if (JSON.stringify(report.summary) !== JSON.stringify(expectedSummary)) fail('summary is inconsistent.')
|
||||
console.log(JSON.stringify({ status: 'freecad-ordered-operation-pair-classification-pass', completedTasks: report.classifications.map(({ taskId }) => taskId), pairs: report.classifications.map(({ pair, classification }) => ({ pair, classification })), nativeBuilderRuns: report.classifications.length * 4, fcstdPhases: report.classifications.length * 3, remainingPairs: report.summary.unknown }, null, 2))
|
||||
|
||||
Reference in New Issue
Block a user