462 lines
144 KiB
JavaScript
462 lines
144 KiB
JavaScript
import { createHash } from 'node:crypto'
|
|
import { readFile, stat } from 'node:fs/promises'
|
|
import { resolve } from 'node:path'
|
|
|
|
const root = resolve(new URL('..', import.meta.url).pathname)
|
|
const report = JSON.parse(await readFile(resolve(root, 'config/freecad-ordered-operation-pair-classification.json'), 'utf8'))
|
|
const fail = (message) => { throw new Error(`FreeCAD ordered operation pair classification: ${message}`) }
|
|
const sha256 = (value) => createHash('sha256').update(value).digest('hex')
|
|
const summariesMatchWithinTolerance = (left, right, tolerance = 1e-6) => (
|
|
left?.isValid === right?.isValid
|
|
&& ['solids', 'faces', 'edges', 'vertices'].every((key) => left?.[key] === right?.[key])
|
|
&& ['volume', 'area'].every((key) => Math.abs(left?.[key] - right?.[key]) <= tolerance)
|
|
&& left?.bounds?.length === right?.bounds?.length
|
|
&& left.bounds.every((value, index) => Math.abs(value - right.bounds[index]) <= tolerance)
|
|
)
|
|
if (report.schemaVersion !== 1 || report.baseline?.freecadVersion !== '1.1.1' || report.baseline.commit !== '0108fd4b4850cc46e625b60e53cea7a7bbe69f8d' || !/^8\./.test(report.baseline.occtVersion)) fail('baseline is invalid.')
|
|
for (const harness of [report.nativeProbe?.executor, report.nativeProbe?.matrix, report.nativeProbe?.resave]) {
|
|
const path = resolve(root, harness?.path ?? '')
|
|
const [content, bytes] = await Promise.all([readFile(path), stat(path).then(({ size }) => size)])
|
|
if (bytes !== harness.bytes || sha256(content) !== harness.sha256) fail(`${harness.path} provenance is stale.`)
|
|
}
|
|
for (const artifact of report.nativeProbe?.artifacts ?? []) {
|
|
const path = resolve(root, 'native/occt-history/dist', artifact.name)
|
|
const [content, bytes] = await Promise.all([readFile(path), stat(path).then(({ size }) => size)])
|
|
if (bytes !== artifact.bytes || sha256(content) !== artifact.sha256) fail(`${artifact.name} provenance is stale.`)
|
|
}
|
|
const expectedPairs = [
|
|
{ pair: 'fuse->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [12, 11, 12] },
|
|
{ pair: 'fuse->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'fuse->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [10, 9, 10] },
|
|
{ pair: 'fuse->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'fuse->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'fuse->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'fuse->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'fuse->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'fuse->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'fuse->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'fuse->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'fuse->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'fuse->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'fuse->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'fuse->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'fuse->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'fuse->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'fuse->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'fuse->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'cut->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'cut->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [3, 4, 3] },
|
|
{ pair: 'cut->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [4, 5, 4] },
|
|
{ pair: 'cut->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'cut->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'cut->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'cut->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'cut->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'cut->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'cut->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'cut->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'cut->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'cut->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'cut->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'cut->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'cut->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'cut->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'cut->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'common->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'common->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'common->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'common->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'common->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'common->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'common->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'common->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'common->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'common->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'common->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'common->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'common->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'common->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'common->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'common->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'common->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'common->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'common->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepAlgoAPI_Common', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'rotate->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'rotate->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'rotate->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'rotate->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'rotate->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'rotate->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'rotate->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'rotate->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'rotate->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'BRep_API: command not done' },
|
|
{ pair: 'rotate->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'rotate->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'rotate->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'rotate->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'rotate->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'rotate->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'rotate->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'rotate->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'rotate->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'pad->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'pad->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'pad->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'pad->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'pad->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'pad->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'pad->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'pad->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'pad->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'pad->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'pad->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pad->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pad->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'pad->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'pad->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'pad->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'pad->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'pad->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'pad->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'pocket->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'pocket->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'pocket->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'pocket->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'pocket->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'pocket->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'pocket->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'pocket->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'pocket->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'pocket->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'pocket->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pocket->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pocket->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'pocket->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'pocket->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'pocket->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'pocket->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'pocket->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'pocket->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'loft->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'loft->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'loft->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'loft->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'loft->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'loft->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'loft->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'loft->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'loft->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'loft->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'loft->fillet', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freecadProfileAccepted: true, wasmCrashSignature: 'table index is out of bounds' },
|
|
{ pair: 'loft->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'loft->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'loft->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'loft->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'loft->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'loft->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'loft->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'loft->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_ThruSections', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'pipe->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'pipe->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'pipe->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'pipe->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'pipe->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'pipe->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'pipe->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'pipe->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'pipe->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'pipe->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'pipe->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pipe->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pipe->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'pipe->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'pipe->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'pipe->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [1.5, 1, 1.5] },
|
|
{ pair: 'pipe->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'pipe->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'pipe->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakePipe', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'revolution->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'revolution->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'revolution->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'revolution->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'revolution->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'revolution->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [2, 1, 2] },
|
|
{ pair: 'revolution->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'revolution->pipe', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'revolution->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'revolution->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'revolution->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'revolution->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'revolution->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'revolution->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'revolution->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'revolution->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'revolution->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [10, 15, 10] },
|
|
{ pair: 'revolution->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [0, 0.5, 0] },
|
|
{ pair: 'revolution->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'groove->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'groove->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'groove->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'groove->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'groove->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'groove->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'groove->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'groove->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'groove->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'groove->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'groove->fillet', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freeCadDiagnostic: 'BRep_API: command not done' },
|
|
{ pair: 'groove->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'BRep_API: command not done', wasmCrashSignature: 'memory access out of bounds' },
|
|
{ pair: 'groove->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'groove->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'groove->thickness', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freecadProfileAccepted: true, wasmCrashSignature: 'memory access out of bounds' },
|
|
{ pair: 'groove->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'groove->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [90, 120, 90] },
|
|
{ pair: 'groove->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'groove->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', firstInputCount: 2, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'fillet->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'fillet->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'fillet->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'fillet->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'fillet->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'fillet->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'fillet->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'fillet->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'fillet->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'fillet->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'fillet->fillet', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freeCadDiagnostic: 'There are no suitable edges for chamfer or fillet' },
|
|
{ pair: 'fillet->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'There are no suitable edges for chamfer or fillet' },
|
|
{ pair: 'fillet->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'fillet->draft', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5], nativeTypeId: 'PartDesign::Draft', freeCadDiagnostic: '', inputShapeTransfer: 'partdesign-feature-summary-exact-with-explicit-brep-drift' },
|
|
{ pair: 'fillet->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true },
|
|
{ pair: 'fillet->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'fillet->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'fillet->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeFillet', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'chamfer->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'chamfer->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'chamfer->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'chamfer->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'chamfer->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'chamfer->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'chamfer->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'chamfer->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'chamfer->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'chamfer->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'chamfer->fillet', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freecadProfileAccepted: true, wasmCrashSignature: 'memory access out of bounds' },
|
|
{ pair: 'chamfer->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'BRep_API: command not done', wasmCrashSignature: 'memory access out of bounds' },
|
|
{ pair: 'chamfer->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'chamfer->draft', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5], nativeTypeId: 'PartDesign::Draft', freeCadDiagnostic: '', inputShapeTransfer: 'partdesign-feature-summary-exact-with-explicit-brep-drift' },
|
|
{ pair: 'chamfer->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
|
{ pair: 'chamfer->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'chamfer->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'chamfer->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [6, 7, 6] },
|
|
{ pair: 'chamfer->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepFilletAPI_MakeChamfer', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'hole->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'hole->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'hole->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'hole->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'hole->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'hole->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'hole->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'hole->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'hole->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'hole->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'hole->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'hole->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'hole->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'hole->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'hole->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'hole->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'hole->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'hole->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [6, 7, 6] },
|
|
{ pair: 'hole->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'draft->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'draft->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'draft->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'draft->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'draft->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'draft->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'draft->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'draft->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'draft->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'draft->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'draft->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'draft->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'draft->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'draft->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'draft->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'draft->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'draft->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'draft->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'draft->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_DraftAngle', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'thickness->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'thickness->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'thickness->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'thickness->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'thickness->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'thickness->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'thickness->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'thickness->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'thickness->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'thickness->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'thickness->fillet', decision: 'rejected', reasonCode: 'native-builder-wasm-abort-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freecadProfileAccepted: true, freecadSelectedEdges: [1], wasmCrashSignature: 'null function or function signature mismatch' },
|
|
{ pair: 'thickness->chamfer', decision: 'rejected', reasonCode: 'native-builder-cpp-exception-with-freecad-profile-acceptance-and-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freecadProfileAccepted: true, freecadSelectedEdges: [1] },
|
|
{ pair: 'thickness->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'thickness->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'thickness->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true },
|
|
{ pair: 'thickness->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'thickness->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'thickness->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'thickness->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepOffsetAPI_MakeThickSolid', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'linear-pattern->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [16, 15, 16] },
|
|
{ pair: 'linear-pattern->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'linear-pattern->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [10, 9, 10] },
|
|
{ pair: 'linear-pattern->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'linear-pattern->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'linear-pattern->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'linear-pattern->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'linear-pattern->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'linear-pattern->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'linear-pattern->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'linear-pattern->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'linear-pattern->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'linear-pattern->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'linear-pattern->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'linear-pattern->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
|
{ pair: 'linear-pattern->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'linear-pattern->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'linear-pattern->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'linear-pattern->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'polar-pattern->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'polar-pattern->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'polar-pattern->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'polar-pattern->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'polar-pattern->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'polar-pattern->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'polar-pattern->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'polar-pattern->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'polar-pattern->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'BRep_API: command not done' },
|
|
{ pair: 'polar-pattern->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'polar-pattern->fillet', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Fillet', freeCadDiagnostic: 'BRep_API: command not done', freecadSelectedEdges: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26], wasmCrashSignature: 'null function or function signature mismatch' },
|
|
{ pair: 'polar-pattern->chamfer', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4], nativeTypeId: 'Part::Chamfer', freeCadDiagnostic: 'BRep_API: command not done', freecadSelectedEdges: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26] },
|
|
{ pair: 'polar-pattern->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'polar-pattern->draft', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5], nativeTypeId: 'PartDesign::Draft', freeCadDiagnostic: '', inputShapeTransfer: 'partdesign-feature-summary-exact-with-explicit-brep-drift' },
|
|
{ pair: 'polar-pattern->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization', kernelNoOpComparison: 'topology-and-metrics-within-1e-6' },
|
|
{ pair: 'polar-pattern->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'polar-pattern->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'polar-pattern->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'polar-pattern->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'mirrored->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [8, 7, 8] },
|
|
{ pair: 'mirrored->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'mirrored->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [7, 6, 7] },
|
|
{ pair: 'mirrored->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'mirrored->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'mirrored->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'mirrored->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'mirrored->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'mirrored->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'Solids are not Processed' },
|
|
{ pair: 'mirrored->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'mirrored->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'mirrored->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'mirrored->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'mirrored->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'mirrored->thickness', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4] },
|
|
{ pair: 'mirrored->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'mirrored->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'mirrored->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'multi-transform->fuse', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Fuse', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [16, 15, 16] },
|
|
{ pair: 'multi-transform->cut', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'toolSize', mutationTrajectory: [4, 3, 4] },
|
|
{ pair: 'multi-transform->common', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepAlgoAPI_Common', secondInputCount: 2, mutationParameter: 'toolOffsetX', mutationTrajectory: [10, 9, 10] },
|
|
{ pair: 'multi-transform->rotate', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [15, 22.5, 15] },
|
|
{ pair: 'multi-transform->pad', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakePrism', secondInputCount: 1, mutationParameter: 'length', mutationTrajectory: [5, 7.5, 5], nativeTypeId: 'PartDesign::Pad', freeCadDiagnostic: 'FeatureExtrusion: Length: Could not extrude the sketch!' },
|
|
{ pair: 'multi-transform->pocket', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakePrism+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'length', mutationTrajectory: [5, 4, 5] },
|
|
{ pair: 'multi-transform->loft', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'accepted', secondBuilder: 'BRepOffsetAPI_ThruSections', secondInputCount: 2, mutationParameter: 'ruled', mutationTrajectory: [false, true, false], nativeTypeId: 'Part::Loft', freeCadDiagnostic: 'Profile shape is not a single vertex, edge, wire nor face.' },
|
|
{ pair: 'multi-transform->pipe', decision: 'rejected', reasonCode: 'freecad-input-precondition-reject-with-kernel-diagnostic-and-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'freecad-document', kernelOutcome: 'invalid-result', secondBuilder: 'BRepOffsetAPI_MakePipe', secondInputCount: 2, mutationParameter: 'spineLength', mutationTrajectory: [15, 12, 15], nativeTypeId: 'Part::Sweep', freeCadDiagnostic: 'A fatal error occurred when making the sweep' },
|
|
{ pair: 'multi-transform->revolution', decision: 'rejected', reasonCode: 'native-builder-and-freecad-profile-reject-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-builder', secondBuilder: 'BRepPrimAPI_MakeRevol', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [360, 270, 360], nativeTypeId: 'Part::Revolution', freeCadDiagnostic: 'BRep_API: command not done' },
|
|
{ pair: 'multi-transform->groove', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeRevol+BRepAlgoAPI_Cut', secondInputCount: 2, mutationParameter: 'angle', mutationTrajectory: [360, 180, 360] },
|
|
{ pair: 'multi-transform->fillet', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeFillet', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'multi-transform->chamfer', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepFilletAPI_MakeChamfer', secondInputCount: 1, mutationParameter: 'distance', mutationTrajectory: [0.4, 0.6, 0.4] },
|
|
{ pair: 'multi-transform->hole', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepPrimAPI_MakeCylinder+BRepAlgoAPI_Cut', secondInputCount: 1, mutationParameter: 'radius', mutationTrajectory: [1, 1.5, 1] },
|
|
{ pair: 'multi-transform->draft', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepOffsetAPI_DraftAngle', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [5, 8, 5] },
|
|
{ pair: 'multi-transform->thickness', decision: 'rejected', reasonCode: 'native-and-freecad-profile-no-op-with-clean-resave', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, rejectionAuthority: 'occt-no-op', kernelOutcome: 'no-op', secondBuilder: 'BRepOffsetAPI_MakeThickSolid', secondInputCount: 1, mutationParameter: 'offset', mutationTrajectory: [-0.4, -0.6, -0.4], nativeTypeId: 'Part::Thickness', freeCadDiagnostic: 'Valid', freecadProfileNoOp: true, rollbackShape: 'geometry-and-summary-exact-with-explicit-brep-reserialization' },
|
|
{ pair: 'multi-transform->linear-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'translationX', mutationTrajectory: [8, 9, 8] },
|
|
{ pair: 'multi-transform->polar-pattern', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'angle', mutationTrajectory: [30, 45, 30] },
|
|
{ pair: 'multi-transform->mirrored', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse', secondInputCount: 1, mutationParameter: 'planeOriginX', mutationTrajectory: [5, 6, 5] },
|
|
{ pair: 'multi-transform->multi-transform', decision: 'accepted', reasonCode: 'native-builders-mutation-naming-and-fcstd-resave-pass', firstBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', firstInputCount: 1, secondBuilder: 'BRepBuilderAPI_Transform+BRepAlgoAPI_Fuse(ordered)', secondInputCount: 1, mutationParameter: 'multiTranslationX', mutationTrajectory: [8, 9, 8] },
|
|
]
|
|
if (report.nativeProbe?.artifacts?.length !== 3 || report.classifications?.length !== expectedPairs.length) fail('native artifacts or classification prefix is incomplete.')
|
|
for (const [index, entry] of report.classifications.entries()) {
|
|
const expected = expectedPairs[index]
|
|
const [firstOperation, secondOperation] = expected.pair.split('->')
|
|
const firstBuilder = expected.firstBuilder ?? 'BRepAlgoAPI_Fuse'
|
|
const firstInputCount = expected.firstInputCount ?? 2
|
|
if (entry.taskId !== `TSN-PAIR-${expected.pair.replace('->', '-')}` || entry.pair !== expected.pair || entry.classification !== expected.decision || entry.reasonCode !== expected.reasonCode || entry.nativeDecision !== expected.decision || entry.first?.operation !== firstOperation || entry.first.builder !== firstBuilder || entry.first.inputCount !== firstInputCount || entry.first.historyProvider !== 'occt-native' || entry.first.summary?.isValid !== true || entry.first.historyRecords < 1) fail(`${expected.pair} decision contract is invalid.`)
|
|
if (expected.decision === 'rejected') {
|
|
if ('second' in entry || 'mutation' in entry || 'naming' in entry) fail(`${expected.pair} fabricates evidence for a result that FreeCAD rejected.`)
|
|
const rejection = entry.rejection
|
|
if (rejection?.scope !== 'second-operation-only' || rejection.authority !== expected.rejectionAuthority || rejection.parameter !== expected.mutationParameter || JSON.stringify(rejection.trajectory) !== JSON.stringify(expected.mutationTrajectory)) fail(`${expected.pair} rejection trajectory is invalid.`)
|
|
if (expected.rejectionAuthority === 'occt-builder') {
|
|
if (rejection.stable !== true || rejection.attempts?.length !== 3) fail(`${expected.pair} OCCT rejection is unstable.`)
|
|
for (const [attemptIndex, attempt] of rejection.attempts.entries()) {
|
|
const wasmAbort = typeof expected.wasmCrashSignature === 'string'
|
|
if (attempt.operation !== secondOperation || attempt.builder !== expected.secondBuilder || attempt.inputCount !== expected.secondInputCount || attempt.parameter !== expected.mutationParameter || attempt.parameterValue !== expected.mutationTrajectory[attemptIndex] || attempt.runtime !== 'occt-native' || attempt.outcome !== 'rejected' || attempt.resultProduced !== false || attempt.shapeProduced !== false || attempt.historyProduced !== false || attempt.rejectionStage !== 'builder' || attempt.exceptionTransport !== (wasmAbort ? 'emscripten-wasm-abort' : 'emscripten-cpp-exception') || attempt.thrownType !== (wasmAbort ? 'RuntimeError' : 'number') || (wasmAbort && attempt.crashSignature !== expected.wasmCrashSignature)) fail(`${expected.pair} OCCT attempt ${attemptIndex} is invalid.`)
|
|
for (const absent of ['summary', 'historyProvider', 'historyRecords', 'historySha256', 'namingStatus', 'namingEvidenceSha256', 'namingSemanticSha256', 'resultStep', 'resultBrep', 'shape', 'history']) if (absent in attempt) fail(`${expected.pair} OCCT attempt ${attemptIndex} fabricates ${absent}.`)
|
|
}
|
|
} else {
|
|
if (rejection.kernelRestoredExactly !== true || rejection.kernelAttempts?.length !== 3) fail(`${expected.pair} OCCT diagnostic trajectory is incomplete.`)
|
|
for (const [attemptIndex, attempt] of rejection.kernelAttempts.entries()) {
|
|
const validKernelShape = expected.kernelOutcome !== 'invalid-result'
|
|
const expectedAuthority = expected.kernelOutcome === 'no-op' ? 'kernel-no-op' : expected.kernelOutcome === 'accepted' ? 'kernel-superset-only' : 'kernel-invalid-result'
|
|
const tolerantNoOp = expected.kernelNoOpComparison === 'topology-and-metrics-within-1e-6'
|
|
const noOpMatchesInput = tolerantNoOp
|
|
? attempt.noOpComparison === expected.kernelNoOpComparison && summariesMatchWithinTolerance(attempt.summary, entry.first.summary)
|
|
: JSON.stringify(attempt.summary) === JSON.stringify(entry.first.summary)
|
|
if (attempt.operation !== secondOperation || attempt.builder !== expected.secondBuilder || attempt.inputCount !== expected.secondInputCount || attempt.parameter !== expected.mutationParameter || attempt.parameterValue !== expected.mutationTrajectory[attemptIndex] || attempt.runtime !== 'occt-native' || attempt.outcome !== expected.kernelOutcome || attempt.resultProduced !== true || attempt.shapeProduced !== true || attempt.validShapeProduced !== validKernelShape || attempt.historyProduced !== true || attempt.historyProvider !== 'occt-native' || attempt.summary?.isValid !== validKernelShape || attempt.historyRecords < 1 || !attempt.historySha256 || attempt.authority !== expectedAuthority || (expected.kernelOutcome === 'no-op' && !noOpMatchesInput)) fail(`${expected.pair} OCCT compatibility attempt ${attemptIndex} is invalid.`)
|
|
}
|
|
}
|
|
const persistence = rejection.persistence
|
|
const diagnostic = persistence?.diagnostic
|
|
const freecadProfileAccepted = expected.freecadProfileAccepted === true
|
|
const freecadProfileNoOp = expected.freecadProfileNoOp === true
|
|
const noOpSourceBrepReserialized = expected.rollbackShape === 'geometry-and-summary-exact-with-explicit-brep-reserialization' && persistence?.checks?.sourceShapeRestored === false && persistence?.checks?.sourceShapeSummaryRestored === true && persistence?.checks?.sourceShapeGeometricallyRestored === true && persistence?.rollback?.sourceBrepReserialized === true
|
|
const persistenceChecksPass = Object.values(persistence?.checks ?? {}).every(Boolean) || (freecadProfileAccepted && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'nativeFeatureRejected').every(([, value]) => value === true)) || (freecadProfileNoOp && persistence?.checks?.freecadProfileNoOp === true && persistence?.checks?.freecadProfileAccepted === false && persistence?.checks?.nativeFeatureRejected === false && Object.entries(persistence?.checks ?? {}).filter(([key]) => !['nativeFeatureRejected', 'freecadProfileAccepted', ...(noOpSourceBrepReserialized ? ['sourceShapeRestored'] : [])].includes(key)).every(([, value]) => value === true)) || (!freecadProfileAccepted && !freecadProfileNoOp && persistence?.checks?.nativeFeatureRejected === true && Object.entries(persistence?.checks ?? {}).filter(([key]) => key !== 'freecadProfileAccepted').every(([, value]) => value === true))
|
|
if (persistence?.status !== 'pass' || persistence.decision !== 'rejected' || persistence.pair !== entry.pair || persistence.operation !== secondOperation || persistence.nativeTypeId !== expected.nativeTypeId || persistence.freecadVersion !== '1.1.1' || !persistenceChecksPass) fail(`${expected.pair} FCStd rejection evidence is incomplete.`)
|
|
if (diagnostic?.nativeTypeId !== expected.nativeTypeId || diagnostic.parameter?.name !== expected.mutationParameter || diagnostic.parameter.value !== expected.mutationTrajectory[0] || diagnostic.inputShape?.solids !== 1 || diagnostic.recomputeResult !== true || !diagnostic.objects?.some(({ name, typeId }) => name === 'PairResult' && typeId === expected.nativeTypeId)) fail(`${expected.pair} did not capture a real FreeCAD profile evaluation.`)
|
|
if (expected.freecadSelectedEdges && JSON.stringify(diagnostic.input?.selectedEdges) !== JSON.stringify(expected.freecadSelectedEdges)) fail(`${expected.pair} FreeCAD selected-edge fixture changed.`)
|
|
if (freecadProfileNoOp) {
|
|
if (diagnostic.shapeNull !== false || diagnostic.shapeValid !== true || diagnostic.statusString !== 'Valid' || !diagnostic.state?.includes('Up-to-date') || JSON.stringify(diagnostic.resultShape) !== JSON.stringify(diagnostic.inputShape)) fail(`${expected.pair} FreeCAD no-op evidence is incomplete.`)
|
|
} else if (freecadProfileAccepted) {
|
|
if (persistence.checks.nativeFeatureRejected !== false || persistence.checks.freecadProfileAccepted !== true || diagnostic.shapeNull !== false || diagnostic.shapeValid !== true || diagnostic.statusString !== 'Valid' || !diagnostic.state?.includes('Up-to-date')) fail(`${expected.pair} FreeCAD profile acceptance evidence is incomplete.`)
|
|
} else if (diagnostic.shapeNull !== true || diagnostic.shapeValid !== false || !diagnostic.state?.includes('Invalid') || diagnostic.statusString === 'Valid') {
|
|
fail(`${expected.pair} did not capture a real rejected FreeCAD recompute.`)
|
|
}
|
|
if (Object.hasOwn(expected, 'freeCadDiagnostic') && diagnostic.statusString !== expected.freeCadDiagnostic) fail(`${expected.pair} FreeCAD profile diagnostic changed.`)
|
|
if (expected.inputShapeTransfer === 'partdesign-feature-summary-exact-with-explicit-brep-drift') {
|
|
const input = diagnostic.input
|
|
if (input?.name !== 'DraftBase' || input.typeId !== 'PartDesign::Feature' || JSON.stringify(input.subelements) !== JSON.stringify(['Face1']) || input.sourceName !== persistence.source?.name || input.shapeSummaryTransferredExactly !== true || typeof input.sourceBrepSha256 !== 'string' || typeof input.draftBaseBrepSha256 !== 'string' || input.sourceBrepSha256 === input.draftBaseBrepSha256) fail(`${expected.pair} PartDesign input Shape transfer evidence is incomplete.`)
|
|
}
|
|
if (persistence.source?.shape?.solids !== 1 || !persistence.source.shape.brepSha256) fail(`${expected.pair} source Shape evidence is incomplete.`)
|
|
if (expected.rollbackShape === 'geometry-and-summary-exact-with-explicit-brep-reserialization') {
|
|
const before = persistence.rollback?.before
|
|
const after = persistence.rollback?.after
|
|
const symmetricDifference = persistence.rollback?.sourceShapeSymmetricDifference
|
|
const withoutBrep = (shape) => Object.fromEntries(Object.entries(shape ?? {}).filter(([key]) => key !== 'brepSha256'))
|
|
if (JSON.stringify(before?.objects) !== JSON.stringify(after?.objects) || JSON.stringify(withoutBrep(before?.sourceShape)) !== JSON.stringify(withoutBrep(after?.sourceShape)) || before?.sourceShape?.brepSha256 === after?.sourceShape?.brepSha256 || persistence.rollback?.sourceBrepReserialized !== true || persistence.rollback?.sourceShapeTopologicallyEqual !== false || symmetricDifference?.beforeMinusAfterVolume !== 0 || symmetricDifference?.afterMinusBeforeVolume !== 0 || persistence.checks.sourceShapeSummaryRestored !== true || persistence.checks.sourceShapeGeometricallyRestored !== true || persistence.checks.sourceShapeRestored !== false) fail(`${expected.pair} did not classify the source BREP reserialization precisely.`)
|
|
} else if (JSON.stringify(persistence.rollback?.before) !== JSON.stringify(persistence.rollback?.after)) fail(`${expected.pair} abort did not restore the source object set and Shape.`)
|
|
const phases = persistence.phases
|
|
if (JSON.stringify(phases?.initial) !== JSON.stringify(phases?.reopened) || JSON.stringify(phases?.initial) !== JSON.stringify(phases?.resaved) || phases.initial.objects?.length !== persistence.rollback.before.objects.length || phases.initial.objects?.some(({ typeId }) => typeId === 'PartDesign::Body' || typeId === 'PartDesign::Pad' || typeId === 'Part::Loft' || typeId === 'Part::Revolution')) fail(`${expected.pair} polluted the clean FCStd save/reopen/resave chain.`)
|
|
continue
|
|
}
|
|
if (entry.second?.operation !== secondOperation || entry.second.builder !== expected.secondBuilder || entry.second.inputCount !== expected.secondInputCount || entry.second.historyProvider !== 'occt-native') fail(`${expected.pair} accepted second operation is invalid.`)
|
|
if (entry.second.summary?.isValid !== true || entry.second.historyRecords < 1 || entry.mutation?.changed !== true || entry.mutation?.restoredExactly !== true) fail(`${expected.pair} builder or mutation evidence is incomplete.`)
|
|
if (entry.mutation.scope !== 'second-operation-only' || entry.mutation.parameter !== expected.mutationParameter || JSON.stringify(entry.mutation.trajectory) !== JSON.stringify(expected.mutationTrajectory) || entry.mutation.beforeValue !== expected.mutationTrajectory[0] || entry.mutation.editedValue !== expected.mutationTrajectory[1] || entry.mutation.restoredValue !== expected.mutationTrajectory[2]) fail(`${expected.pair} mutation trajectory is invalid.`)
|
|
if (entry.mutation.editedEvidence?.operation !== secondOperation || entry.mutation.restoredEvidence?.operation !== secondOperation || entry.mutation.editedEvidence?.builder !== expected.secondBuilder || entry.mutation.restoredEvidence?.builder !== expected.secondBuilder || entry.mutation.editedEvidence?.inputCount !== expected.secondInputCount || entry.mutation.restoredEvidence?.inputCount !== expected.secondInputCount || entry.mutation.editedEvidence?.historyProvider !== 'occt-native' || entry.mutation.restoredEvidence?.historyProvider !== 'occt-native') fail(`${expected.pair} mutation history provider is invalid.`)
|
|
if (entry.second.namingSemanticSha256 !== entry.mutation.restoredEvidence?.namingSemanticSha256) fail(`${expected.pair} semantic naming evidence did not restore to nominal.`)
|
|
if (entry.naming?.upstreamEvidenceRestored !== true || entry.naming?.downstreamEvidence !== true || entry.naming?.jsonRoundtripStable !== true) fail(`${expected.pair} naming evidence is incomplete.`)
|
|
if (entry.persistence?.status !== 'pass' || entry.persistence.decision !== 'accepted' || entry.persistence.pair !== entry.pair || entry.persistence.freecadVersion !== '1.1.1' || !Object.values(entry.persistence.checks ?? {}).every(Boolean)) fail(`${expected.pair} FCStd persistence evidence is incomplete.`)
|
|
const phases = entry.persistence.phases
|
|
if (JSON.stringify(phases?.initial) !== JSON.stringify(phases?.reopened) || JSON.stringify(phases?.initial) !== JSON.stringify(phases?.resaved) || phases.initial.namingEvidenceSha256 !== entry.second.namingEvidenceSha256) fail(`${expected.pair} FCStd phases changed Shape or naming evidence.`)
|
|
}
|
|
const expectedSummary = { registeredOperations: 19, orderedPairs: 361, classifiedPairs: 357, accepted: 260, rejected: 97, unknown: 4 }
|
|
if (JSON.stringify(report.summary) !== JSON.stringify(expectedSummary)) fail('summary is inconsistent.')
|
|
console.log(JSON.stringify({ status: 'freecad-ordered-operation-pair-classification-pass', completedTasks: report.classifications.map(({ taskId }) => taskId), pairs: report.classifications.map(({ pair, classification }) => ({ pair, classification })), nativeBuilderRuns: report.classifications.length * 4, fcstdPhases: report.classifications.length * 3, remainingPairs: report.summary.unknown }, null, 2))
|