FreeCADWasmDev/docs/current/efficiency-next-baseline.md

# Unattended Execution Timing

Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.

Cycles: 20; aggregate measured time: 2327.110 s.

| Phase | Total (s) | Share | Count | Average (s) | Maximum (s) |
|---|---:|---:|---:|---:|---:|
| agent/post-read | 534.728 | 22.98% | 61 | 8.766 | 53.468 |
| request/first-activity-wait | 329.519 | 14.16% | 3 | 109.840 | 179.850 |
| agent/editing | 204.550 | 8.79% | 10 | 20.455 | 44.336 |
| scheduler/provider-backoff | 196.704 | 8.45% | 3 | 65.568 | 116.734 |
| agent/decision | 190.923 | 8.20% | 32 | 5.966 | 21.478 |
| agent/failure-recovery | 174.068 | 7.48% | 6 | 29.011 | 54.060 |
| other | 164.402 | 7.06% | 24 | 6.850 | 110.144 |
| agent/initial-decision | 158.860 | 6.83% | 12 | 13.238 | 32.796 |
| agent/post-edit | 60.077 | 2.58% | 7 | 8.582 | 11.981 |
| agent/synthesis | 50.228 | 2.16% | 10 | 5.023 | 18.965 |
| agent/finalization | 49.644 | 2.13% | 9 | 5.516 | 20.807 |
| pre-agent-pipeline/build | 47.095 | 2.02% | 5 | 9.419 | 46.455 |
| build | 46.935 | 2.02% | 1 | 46.935 | 46.935 |
| agent/idle-stop | 36.161 | 1.55% | 2 | 18.081 | 26.004 |
| post-pipeline/build | 23.459 | 1.01% | 2 | 11.730 | 23.295 |
| preparation/continue | 14.029 | 0.60% | 18 | 0.779 | 3.476 |
| pre-agent-pipeline/business-acceptance | 12.642 | 0.54% | 5 | 2.528 | 4.737 |
| post-pipeline/capability-registry | 8.552 | 0.37% | 3 | 2.851 | 2.855 |
| preparation/implementationPacket | 6.624 | 0.28% | 18 | 0.368 | 0.610 |
| pre-agent-pipeline/business-audit | 3.213 | 0.14% | 5 | 0.643 | 0.708 |
| post-pipeline/business-acceptance | 2.556 | 0.11% | 2 | 1.278 | 1.286 |
| scheduler/process-start | 2.520 | 0.11% | 15 | 0.168 | 0.346 |
| pre-agent-pipeline/artifact-sync | 2.133 | 0.09% | 5 | 0.427 | 1.926 |
| post-pipeline/failure-reconciliation | 1.790 | 0.08% | 3 | 0.597 | 0.742 |
| artifact-manifest | 1.706 | 0.07% | 1 | 1.706 | 1.706 |
| source/read | 1.542 | 0.07% | 68 | 0.023 | 0.858 |
| post-pipeline/artifact-sync | 1.180 | 0.05% | 2 | 0.590 | 1.128 |
| preparation/batchPreflight | 0.756 | 0.03% | 18 | 0.042 | 0.044 |
| post-pipeline/module-registry | 0.252 | 0.01% | 3 | 0.084 | 0.084 |
| pre-agent-pipeline/preflight | 0.187 | 0.01% | 5 | 0.037 | 0.038 |
| post-pipeline/preflight | 0.075 | 0.00% | 2 | 0.037 | 0.038 |

## Wall-Clock Coverage

First cycle start to last observed event: 3665.870 s.
Inside observed cycles: 1977.140 s; between cycles: 1688.730 s.

| Previous Cycle | Next Cycle | Gap (s) |
|---:|---:|---:|
| 4981 | 4982 | 60.286 |
| 4982 | 4983 | 120.425 |
| 4983 | 4984 | 4.828 |
| 4984 | 4985 | 21.205 |
| 4985 | 4986 | 1333.384 |
| 4986 | 4987 | 10.579 |
| 4987 | 4988 | 3.102 |
| 4988 | 4993 | 27.701 |
| 4993 | 4994 | 5.969 |
| 4994 | 4995 | 5.897 |
| 4995 | 4997 | 61.661 |
| 4997 | 4998 | 1.292 |
| 4998 | 4999 | 1.700 |
| 4999 | 5000 | 30.700 |

## Cycle 4981

Task: FW-P6-FPA-Y; batch: {'id': '2c258ef07e314e58142f5d7f', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 120.054 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.128 |
| batchPreflight | 0.044 |
| implementationPacket | 0.145 |

### waitingTiming

| Step | Seconds |
|---|---:|
| scheduler/provider-backoff | 59.979 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.175 | scheduler.cycle.started | thread.started |
| 0.203 | 119.850 | turn.started | scheduler.cycle.completed |

## Cycle 4982

Task: UNATTENDED-OPTIMIZATION; batch: {'id': '2c258ef07e314e58142f5d7f', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 180.057 s; file changes: 0.

### waitingTiming

| Step | Seconds |
|---|---:|
| scheduler/provider-backoff | 116.734 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.176 | scheduler.cycle.started | thread.started |
| 0.197 | 179.860 | turn.started | scheduler.cycle.completed |

## Cycle 4983

Task: FW-P6-FPA-Y; batch: {'id': '2c258ef07e314e58142f5d7f', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.531 s; between-event time: 179.582 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.130 |
| batchPreflight | 0.042 |
| implementationPacket | 0.144 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 4.023 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/provided-source-index.md && printf '\\n--- related files ---\\n' && rg -n \"cam-python\|CamRuntime\|CAM\|failureReconciliation\|module-batch\" docs tools freecad-source web 2>/dev/null \| head -240" |
| 2 | source/read | 17.891 | 0.003 | 0 | /bin/bash -lc "rg --files \| rg 'cam\|Cam\|module-batch\|failure_reconciliation' \| head -200; sed -n '1,220p' tools/failure_reconciliation.py" |
| 3 | other | 23.353 | 0.001 | 0 | /bin/bash -lc 'python3 tools/failure_reconciliation.py --help \| tail -40' |
| 4 | other | 8.051 | 0.520 | 1 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 788b37eda261d9c3606c 3458d6647cb18139f55c 74e115e78279f57e1b33 --disposition superseded --reason '该历史事件是诊断脚本引用不存在的源码路径/过时批次上下文导致，当前 CAM 实现与用例已由现存 facade、worker 和 gate 源码承载；不代表当前业务失败。' --source web/src/cam-python-family-batch-facade.ts && python3 tools/failure_reconciliation.py --check --module CAM" |
| 5 | other | 30.833 | 0.002 | 0 | /bin/bash -lc "python3 - <<'PY' import json p=json.load(open('docs/current/failure-reconciliation.json')) for k in ['788b37eda261d9c3606c','3458d6647cb18139f55c','74e115e78279f57e1b33','e4a142ef5eaad9bc168c']:  print(k,p.get('resolutions',{}).get(k) or p.get('failures',{}).get(k)) PY" |
| 6 | other | 17.412 | 0.001 | 0 | /bin/bash -lc "python3 - <<'PY' import json p=json.load(open('docs/current/failure-reconciliation.json')); print(p.keys()) PY" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.178 | scheduler.cycle.started | thread.started |
| 0.204 | 32.796 | turn.started | agent_message |
| 33.000 | 4.023 | item.completed | command_execution |
| 37.025 | 17.891 | command:source/read | command_execution |
| 54.920 | 23.353 | command:source/read | command_execution |
| 78.274 | 18.965 | command:other | agent_message |
| 97.239 | 8.051 | item.completed | command_execution |
| 105.811 | 30.833 | command:other | command_execution |
| 136.646 | 17.412 | command:other | command_execution |
| 154.059 | 26.053 | command:other | scheduler.cycle.completed |

## Cycle 4984

Task: FW-P6-FPA-Y; batch: {'id': '411b91a55e558b568969077c', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 0.000 s; between-event time: 30.041 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.547 |
| batchPreflight | 0.043 |
| implementationPacket | 0.310 |

### waitingTiming

| Step | Seconds |
|---|---:|
| scheduler/provider-backoff | 19.991 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.173 | scheduler.cycle.started | thread.started |
| 0.202 | 29.839 | turn.started | scheduler.cycle.completed |

## Cycle 4985

Task: FW-P6-FPA-Y; batch: {'id': '411b91a55e558b568969077c', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 0.008 s; between-event time: 106.047 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.178 |
| batchPreflight | 0.043 |
| implementationPacket | 0.310 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.084 |
| post-pipeline/capability-registry | 2.855 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.094 | 0.001 | 0 | /bin/bash -lc "rg -n 'TechDraw_(GeometricHatch\|Hatch\|Image\|StackBottom\|StackDown\|StackGroup\|StackTop\|StackUp)\|StackOrder\|DrawViewImage\|DrawGeomHatch' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 2 | source/read | 7.550 | 0.002 | 0 | /bin/bash -lc "rg -n 'TechDraw\|Stack\|Hatch\|Image\|source\|Command' docs/current/provided-source-index.md web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx" |
| 3 | source/read | 9.015 | 0.001 | 0 | /bin/bash -lc "sed -n '2940,3175p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 4 | source/read | 2.469 | 0.001 | 0 | /bin/bash -lc "sed -n '295,340p;505,535p' web/src/workbench-shell.tsx" |
| 5 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "rg -n -A 65 -B 5 'CmdTechDrawImage::activated' freecad-source/src/Mod/TechDraw/Gui/CommandDecorate.cpp" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.161 | scheduler.cycle.started | thread.started |
| 0.184 | 5.874 | turn.started | agent_message |
| 6.058 | 3.094 | item.completed | command_execution |
| 9.153 | 7.550 | command:source/read | command_execution |
| 16.705 | 9.015 | command:source/read | command_execution |
| 25.723 | 10.992 | command:source/read | agent_message |
| 36.714 | 2.469 | item.completed | command_execution |
| 39.185 | 0.136 | command:source/read | command_execution |
| 39.322 | 29.651 | command:source/read | agent_message |
| 68.973 | 24.796 | item.completed | file_change |
| 93.781 | 10.476 | item.completed | agent_message |
| 104.257 | 0.676 | item.completed | turn.completed |
| 104.933 | 1.121 | turn.completed | scheduler.cycle.completed |

## Cycle 4986

Task: UNATTENDED-OPTIMIZATION; batch: {'id': '411b91a55e558b568969077c', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
Observed command time (union): 175.225 s; between-event time: 247.950 s; file changes: 6.

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.126 | 0.002 | 0 | /bin/bash -lc "sed -n '1,220p' docs/UNATTENDED_WORKFLOW.md && sed -n '1,180p' docs/current/provided-source-index.md && cat docs/current/periodic-optimization/optimization-000022-context.json" |
| 2 | source/read | 6.549 | 0.002 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --help && cat docs/business-acceptance/TechDraw.json && cat web/package.json && sed -n '1,120p' tools/run_business_acceptance.py" |
| 3 | source/read | 9.230 | 0.004 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'stack\|Stack\|techDrawImages' --paths web/src/workbench-shell.tsx web/src/desktop-command-dispatcher.ts web/src/techdraw-python-family-facade.ts --max-count 100 && sed -n '290,370p' web/src/workbench-shell.tsx && sed -n '2940,3045p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp && cat tools/techdraw-business-cases.mjs" |
| 4 | source/read | 5.407 | 0.002 | 0 | /bin/bash -lc "sed -n '1,200p' freecad-source/src/Mod/TechDraw/App/DrawViewImage.cpp && sed -n '312,370p' freecad-source/src/Mod/TechDraw/Gui/CommandDecorate.cpp && sed -n '1,150p' web/tools/sync-assets.mjs && sed -n '1,120p' tools/wasm-probe-runtime.mjs && rg -n 'pythonFamilyBatch\|desktopCommand\|dispatchTechDrawDesktop\|status.*success' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawKernelProbe.cpp && rg --files tools \| rg 'techdraw\|sync.*artifact'" |
| 5 | source/read | 11.353 | 0.002 | 0 | /bin/bash -lc "sed -n '1570,1615p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp && sed -n '1,180p' tools/techdraw-browser-cases.mjs && sed -n '1,110p' freecad-source/src/Mod/TechDraw/Gui/QGIViewImage.cpp && ls tools/*techdraw* tools/*artifact* && sed -n '1,100p' freecad-source/src/Mod/TechDraw/App/DrawViewImage.h" |
| 6 | build | 0.159 | 46.935 | 0 | /bin/bash -lc 'cmake --build freecad-source/build-web/techdraw-native-configure --target FreeCADWebTechDrawRuntimeProbe -j 4' |
| 7 | artifact-manifest | 8.961 | 1.706 | 0 | /bin/bash -lc 'node web/tools/sync-assets.mjs' |
| 8 | other | 13.081 | 2.351 | 0 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:techdraw.createRecompute TechDraw:desktop:TechDraw_Image --reuse' |
| 9 | source/read | 11.888 | 0.002 | 0 | /bin/bash -lc "sed -n '110,180p' tools/techdraw-browser-cases.mjs && sed -n '175,240p' web/src/desktop-command-dispatcher.ts && sed -n '410,465p' web/src/workbench-shell.tsx && sed -n '570,615p' web/src/workbench-shell.tsx && sed -n '1,130p' tools/inspect_web_module_artifacts.py && sed -n '130,175p' freecad-source/src/Mod/TechDraw/Gui/QGIViewImage.cpp" |
| 10 | source/read | 12.666 | 0.002 | 0 | /bin/bash -lc "sed -n '95,113p' tools/techdraw-browser-cases.mjs && sed -n '480,570p' web/src/workbench-shell.tsx && sed -n '95,170p' web/src/desktop-command-dispatcher.ts && sed -n '1,90p' web/vite.config.ts" |
| 11 | other | 0.047 | 0.001 | 127 | /bin/bash -lc './node_modules/.bin/vite --host 127.0.0.1 --port 5197 --strictPort' |
| 12 | other | 0.160 | 30.667 | 1 | /bin/bash -lc 'python3 tools/inspect_web_module_artifacts.py --module TechDraw --output docs/current/periodic-optimization/optimization-000022-artifacts.json && FREECAD_BROWSER_ORIGIN=http://127.0.0.1:5197 node tools/techdraw-browser-cases.mjs' |
| 13 | other | 0.000 | 3.822 | 0 | /bin/bash -lc 'web/node_modules/.bin/tsc --noEmit --project web/tsconfig.json' |
| 14 | other | 0.000 | 4.061 | 1 | /bin/bash -lc 'FREECAD_BROWSER_ORIGIN=http://127.0.0.1:5197 node tools/techdraw-browser-cases.mjs' |
| 15 | source/read | 0.000 | 0.002 | 0 | /bin/bash -lc "sed -n '345,460p' web/src/techdraw-python-family-facade.ts && cat web/src/techdraw-python.worker.ts && sed -n '1,100p' web/src/techdraw.worker.ts" |
| 16 | other | 0.000 | 3.840 | 1 | /bin/bash -lc 'FREECAD_TECHDRAW_BROWSER_CASE=image FREECAD_BROWSER_ORIGIN=http://127.0.0.1:5197 node tools/techdraw-browser-cases.mjs' |
| 17 | other | 0.000 | 110.144 | 130 | /bin/bash -lc '/home/mes123456/FreeCADWasmDev/working/FreeCAD/web/node_modules/.bin/vite /home/mes123456/FreeCADWasmDev/working/FreeCAD/web --host 127.0.0.1 --port 5197 --strictPort' |
| 18 | other | 0.000 | 2.159 | 1 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:techdraw.createRecompute TechDraw:desktop:TechDraw_Image --reuse' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.175 | scheduler.cycle.started | thread.started |
| 0.209 | 5.444 | turn.started | agent_message |
| 5.653 | 2.126 | item.completed | command_execution |
| 7.782 | 6.549 | command:source/read | command_execution |
| 14.334 | 9.230 | command:source/read | command_execution |
| 23.569 | 9.596 | command:source/read | agent_message |
| 33.165 | 5.407 | item.completed | command_execution |
| 38.574 | 11.353 | command:source/read | command_execution |
| 49.930 | 16.864 | command:source/read | file_change |
| 66.800 | 0.159 | item.completed | command_execution |
| 113.895 | 2.149 | command:build | file_change |
| 116.046 | 8.961 | item.completed | command_execution |
| 126.774 | 13.081 | command:artifact-manifest | command_execution |
| 142.207 | 11.888 | command:other | command_execution |
| 154.097 | 12.666 | command:source/read | command_execution |
| 166.767 | 12.453 | command:source/read | agent_message |
| 179.219 | 33.310 | item.completed | file_change |
| 212.579 | 0.160 | command:other | command_execution |
| 336.888 | 29.736 | command:other | agent_message |
| 366.623 | 44.336 | item.completed | file_change |
| 410.960 | 9.913 | item.completed | agent_message |
| 420.874 | 0.743 | item.completed | turn.completed |
| 421.617 | 1.558 | turn.completed | scheduler.cycle.completed |

## Cycle 4987

Task: FW-P6-FPA-Y; batch: {'id': '7ce988078568634df76f3730', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 5.242 s; between-event time: 71.810 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 3.309 |
| batchPreflight | 0.042 |
| implementationPacket | 0.142 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/failure-reconciliation | 0.742 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | other | 2.592 | 0.001 | 0 | /bin/bash -lc 'pwd;' |
| 2 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md" |
| 3 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' tools/failure_reconciliation.py" |
| 4 | source/read | 10.173 | 0.001 | 0 | /bin/bash -lc "rg -n 'add_argument\|args.source\|args.review\|reviewEvidence' tools/failure_reconciliation.py" |
| 5 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/business-acceptance/TechDraw.json" |
| 6 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "sed -n '1,140p' tools/techdraw-business-cases.mjs" |
| 7 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "rg -n 'TechDraw\|techdraw' web/public/modules/manifest.json" |
| 8 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "rg --files -g AGENTS.md -g '"'!freecad-source/**'"' -g '"'!FreeCADBaseLib/**'"' -g '"'!node_modules/**'"' -g '"'!web/node_modules/**'"'" |
| 9 | source/read | 9.505 | 0.001 | 0 | /bin/bash -lc "sed -n '410,515p' tools/failure_reconciliation.py" |
| 10 | source/read | 0.156 | 0.359 | 0 | /bin/bash -lc 'sha256sum freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.js freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.wasm web/public/kernel/FreeCADWebTechDrawRuntimeProbe.js web/public/kernel/FreeCADWebTechDrawRuntimeProbe.wasm' |
| 11 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 12 | other | 21.478 | 0.389 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 38090726fd56e4cfebe6 --disposition superseded --reason '已核对当前 argparse：--source 为 action=append，每个路径必须重复 --source；原命令将多个路径放在单个 --source 后导致解析失败。本次使用正确参数逐条提交复核，替代该失败诊断；不据此关闭原命令拟复核的其它失败或声明业务通过。' --source tools/failure_reconciliation.py" |
| 13 | other | 0.156 | 1.262 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 607fba7cdc043a11367f --disposition superseded --reason '已按本地索引及 TechDraw manifest 核对实际发布地址为 web/public/kernel 而非旧命令的 web/public/modules/TechDraw。当前构建目录与 kernel 的 JS SHA256 均为 f723c54ad3b6811faf3f3c7363e41f4c36aafd8b7094997d9e289c44d4bb905d，WASM 均为 9a88ac501faae042d3aa12866b45ec1783b645506329e3c3647ae01fc2b4d12c；正确路径的哈希检查成功，替代旧路径诊断，仅证明产物存在且同步。' --source web/public/modules/manifest.json --source tools/techdraw-business-cases.mjs --source web/public/kernel/FreeCADWebTechDrawRuntimeProbe.js --source web/public/kernel/FreeCADWebTechDrawRuntimeProbe.wasm" |
| 14 | other | 0.158 | 1.267 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 979b0accfeff81d31042 --disposition superseded --reason '本次已成功读取 docs/business-acceptance/TechDraw.json 和 tools/techdraw-business-cases.mjs；当前合同声明 node 业务入口及 TechDraw 构建目标，脚本复用 wasm-probe-runtime 加载实际 kernel 产物。旧文件缺失诊断被当前已存在的合同及用例替代；未执行用例，不声明业务验收通过。' --source docs/business-acceptance/TechDraw.json --source tools/techdraw-business-cases.mjs" |
| 15 | other | 0.158 | 1.274 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review c5cd53c7c119197e872e --disposition superseded --reason '已核对 main 的 argparse：没有 --list 选项；当前支持 --module TechDraw 输出模块 remaining，支持 --keys 定点核对并以 --check 检查闭环。本次改用受支持的定点检查替代旧 --list 诊断，失败由调用参数导致，不是 TechDraw 业务执行失败。' --source tools/failure_reconciliation.py" |
| 16 | other | 0.156 | 0.591 | 0 | /bin/bash -lc 'python3 tools/failure_reconciliation.py --check --keys 38090726fd56e4cfebe6 607fba7cdc043a11367f 979b0accfeff81d31042 c5cd53c7c119197e872e' |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.160 | scheduler.cycle.started | thread.started |
| 0.183 | 5.791 | turn.started | agent_message |
| 5.975 | 2.592 | item.completed | command_execution |
| 8.569 | 0.136 | command:other | command_execution |
| 8.706 | 0.136 | command:source/read | command_execution |
| 8.842 | 10.173 | command:source/read | command_execution |
| 19.016 | 0.137 | command:source/read | command_execution |
| 19.154 | 0.136 | command:source/read | command_execution |
| 19.290 | 0.136 | command:source/read | command_execution |
| 19.427 | 0.136 | command:source/read | command_execution |
| 19.650 | 9.505 | command:source/read | command_execution |
| 29.156 | 0.156 | command:source/read | command_execution |
| 29.671 | 0.138 | command:source/read | command_execution |
| 29.810 | 8.327 | command:source/read | agent_message |
| 38.137 | 21.478 | item.completed | command_execution |
| 60.005 | 0.156 | command:other | command_execution |
| 61.424 | 0.158 | command:other | command_execution |
| 62.849 | 0.158 | command:other | command_execution |
| 64.281 | 0.156 | command:other | command_execution |
| 65.029 | 10.079 | command:other | agent_message |
| 75.109 | 0.813 | item.completed | turn.completed |
| 75.922 | 1.130 | turn.completed | scheduler.cycle.completed |

## Cycle 4988

Task: FW-P6-FPA-Y; batch: {'id': 'dbbb44fdc4bf66614bf8dabc', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 11}.
Observed command time (union): 0.009 s; between-event time: 85.051 s; file changes: 2.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 1.099 |
| batchPreflight | 0.042 |
| implementationPacket | 0.550 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/preflight | 0.037 |
| post-pipeline/build | 0.164 |
| post-pipeline/artifact-sync | 0.052 |
| post-pipeline/business-acceptance | 1.286 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 4.051 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
| 2 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' tools/part-business-cases.mjs" |
| 3 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/Part.json' |
| 4 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "rg -n 'Part_Export\|Part_Import\|CurveNet\|saveReopen\|part.io\|part.save\|export\|import' web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx" |
| 5 | source/read | 10.923 | 0.001 | 0 | /bin/bash -lc "rg -n 'ImportCurveNet\|Part_Import\|Part_Export\|save\|document\|fileContent' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp" |
| 6 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '75,220p' web/src/desktop-command-dispatcher.ts" |
| 7 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '330,490p' web/src/workbench-shell.tsx" |
| 8 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "rg -n 'saveReopen\|document\|format\|content' web/src/part-python-family-facade.ts web/src/part-save-facade.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
| 9 | source/read | 7.417 | 0.001 | 0 | /bin/bash -lc "sed -n '245,305p' web/src/workbench-shell.tsx" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.163 | scheduler.cycle.started | thread.started |
| 0.192 | 6.832 | turn.started | agent_message |
| 7.024 | 4.051 | item.completed | command_execution |
| 11.076 | 0.139 | command:source/read | command_execution |
| 11.215 | 0.138 | command:source/read | command_execution |
| 11.354 | 0.138 | command:source/read | command_execution |
| 11.493 | 10.923 | command:source/read | command_execution |
| 22.418 | 0.137 | command:source/read | command_execution |
| 22.556 | 0.138 | command:source/read | command_execution |
| 22.694 | 0.140 | command:source/read | command_execution |
| 22.835 | 12.555 | command:source/read | agent_message |
| 35.391 | 19.132 | item.completed | file_change |
| 54.525 | 7.417 | item.completed | command_execution |
| 61.944 | 10.299 | command:source/read | file_change |
| 72.244 | 11.171 | item.completed | agent_message |
| 83.414 | 0.623 | item.completed | turn.completed |
| 84.038 | 1.022 | turn.completed | scheduler.cycle.completed |

## Cycle 4989

Task: FW-P6-FPA-Y; batch: {'id': '134d419c8569a1279fca36a8', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.415 |
| batchPreflight | 0.041 |
| implementationPacket | 0.496 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 4990

Task: FW-P6-FPA-Y; batch: {'id': '7ec9fdcd9c6935d577ce0a3b', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.412 |
| batchPreflight | 0.042 |
| implementationPacket | 0.493 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 4991

Task: FW-P6-FPA-Y; batch: {'id': 'f0c973d91d81e02d77383b27', 'module': 'Draft', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.412 |
| batchPreflight | 0.042 |
| implementationPacket | 0.493 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 4992

Task: FW-P6-FPA-Y; batch: {'id': 'aa718a128ddc3267efe2d2ff', 'module': 'CAM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.416 |
| batchPreflight | 0.041 |
| implementationPacket | 0.477 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 4993

Task: FW-P6-FPA-Y; batch: {'id': '3b7342aa75909159d2591cde', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 1.936 s; between-event time: 81.155 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.917 |
| batchPreflight | 0.041 |
| implementationPacket | 0.435 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/failure-reconciliation | 0.681 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | other | 3.428 | 0.000 | 0 | /bin/bash -lc pwd |
| 2 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
| 3 | source/read | 0.136 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' tools/failure_reconciliation.py" |
| 4 | source/read | 0.138 | 0.001 | 0 | /bin/bash -lc "sed -n '1,160p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
| 5 | source/read | 12.530 | 0.001 | 0 | /bin/bash -lc "rg -n 'review\|add_argument\|sources' tools/failure_reconciliation.py" |
| 6 | source/read | 0.138 | 0.001 | 0 | /bin/bash -lc "rg -n 'FreeCADWebCAMProbe\|FreeCADWebCamRuntimeProbe\|CAMRuntimeProbe' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt docs/business-acceptance/CAM.json freecad-source/build-web/cam-configure-r1/build.ninja freecad-source/build-web/configure/build.ninja" |
| 7 | other | 0.137 | 0.001 | 0 | /bin/bash -lc "python3 -c 'import json; p=json.load(open(\"docs/current/freecad-web-scheduler-failures.json\")); f=p[\"failures\"]; keys=[\"feb130ea304a50d6e48e\",\"80cd5c3661d63eaa6f81\",\"e7b8840afdd70a86cb67\",\"071582dc5d48c58dae62\"]; print(json.dumps({k:f.get(k) for k in keys},ensure_ascii=False,indent=2))'" |
| 8 | source/read | 11.201 | 0.001 | 0 | /bin/bash -lc 'cat docs/business-acceptance/CAM.json' |
| 9 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "rg -n 'Box.h\|Path.h\|FeaturePartBox\|FreeCADWebCAMProbe\|load\|worker' freecad-source/src/WebAssembly/FreeCADCoreProbe/CAMRuntimeProbe.cpp tools/cam-business-cases.mjs tools/check_web_link_closure.py web/src/cam-python-family-batch-facade.ts" |
| 10 | source/read | 0.138 | 0.001 | 0 | /bin/bash -lc "rg --files freecad-source/src/Mod/Part/App freecad-source/src/Mod/CAM/App tools -g '*Box*' -g '*Path.h' -g '*cam*worker*' -g AGENTS.md" |
| 11 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '395,450p' tools/failure_reconciliation.py" |
| 12 | source/read | 7.726 | 0.001 | 0 | /bin/bash -lc "sed -n '1,160p' tools/record_runtime_issue.py" |
| 13 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' tools/check_web_link_closure.py" |
| 14 | other | 0.137 | 0.001 | 0 | /bin/bash -lc "python3 -c 'from pathlib import Path; p=Path(\"freecad-source/src/Mod/Part/App\"); print(\"Box-related headers:\", [str(x) for x in p.glob(\"*Box*.h\")]); paths=[\"freecad-source/src/Mod/Part/App/Box.h\",\"freecad-source/src/Mod/CAM/App/Path.h\",\"tools/cam-business-cases.mjs\",\"freecad-source/build-web/cam-configure-r1/bin/FreeCADWebCAMProbe.js\",\"web/public/kernel/FreeCADWebCAMProbe.wasm\"]; print(\"\\n\".join(str(Path(x).is_file())+\" \"+x for x in paths))'" |
| 15 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,55p' freecad-source/src/WebAssembly/FreeCADCoreProbe/CAMRuntimeProbe.cpp" |
| 16 | other | 20.639 | 1.260 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 80cd5c3661d63eaa6f81 --disposition superseded --reason '历史 sed 读取诊断使用不存在的 Part/App/Box.h；当前本地实际头文件为 FeaturePartBox.h，CAMRuntimeProbe.cpp 和 CAM/App/Path.h 均存在。记录中的 Python 初始化文本是源码输出，不能视作实际运行异常。以正确源码路径替代旧读取诊断，不声明 CAM 业务通过。' --source freecad-source/src/Mod/Part/App/FeaturePartBox.h --source freecad-source/src/Mod/CAM/App/Path.h --source freecad-source/src/WebAssembly/FreeCADCoreProbe/CAMRuntimeProbe.cpp" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.159 | scheduler.cycle.started | thread.started |
| 0.192 | 5.892 | turn.started | agent_message |
| 6.084 | 3.428 | item.completed | command_execution |
| 9.514 | 0.137 | command:other | command_execution |
| 9.651 | 0.136 | command:source/read | command_execution |
| 9.789 | 0.138 | command:source/read | command_execution |
| 9.928 | 12.530 | command:source/read | command_execution |
| 22.459 | 0.138 | command:source/read | command_execution |
| 22.597 | 0.137 | command:source/read | command_execution |
| 22.735 | 11.201 | command:other | command_execution |
| 33.937 | 0.139 | command:source/read | command_execution |
| 34.077 | 0.138 | command:source/read | command_execution |
| 34.299 | 0.139 | command:source/read | command_execution |
| 34.439 | 8.762 | command:source/read | agent_message |
| 43.201 | 7.726 | item.completed | command_execution |
| 50.929 | 0.138 | command:source/read | command_execution |
| 51.067 | 0.137 | command:source/read | command_execution |
| 51.205 | 0.137 | command:other | command_execution |
| 51.343 | 9.114 | command:source/read | agent_message |
| 60.457 | 20.639 | item.completed | command_execution |
| 82.357 | 0.158 | command:other | command_execution |

## Cycle 4994

Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
Observed command time (union): 0.004 s; between-event time: 137.070 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.529 |
| batchPreflight | 0.042 |
| implementationPacket | 0.607 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.084 |
| post-pipeline/capability-registry | 2.843 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 20.167 | 0.001 | 0 | /bin/bash -lc 'rg -n "TechDraw_(ActiveView\|ArchView\|BrokenView\|ComplexSection\|DraftView\|ExportPageSVG\|PrintAll\|ProjectShape\|ProjectionGroup\|SectionGroup\|SectionView\|View)\|desktop" freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp web/src/desktop-command-dispatcher.ts web/src/techdraw-python-family-facade.ts web/src/techdraw-python.worker.ts web/src/workbench-shell.tsx' |
| 2 | source/read | 12.788 | 0.002 | 0 | /bin/bash -lc "sed -n '840,930p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp; sed -n '3160,3225p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.354 | scheduler.cycle.started | thread.started |
| 0.388 | 12.380 | turn.started | agent_message |
| 12.768 | 20.167 | item.completed | command_execution |
| 32.937 | 12.788 | command:source/read | command_execution |
| 45.728 | 53.468 | command:source/read | agent_message |
| 99.196 | 17.754 | item.completed | file_change |
| 116.956 | 20.118 | item.completed | scheduler.cycle.completed |

## Cycle 4995

Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
Observed command time (union): 0.023 s; between-event time: 126.035 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.172 |
| batchPreflight | 0.042 |
| implementationPacket | 0.610 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/module-registry | 0.084 |
| post-pipeline/capability-registry | 2.854 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 5.036 | 0.021 | 0 | /bin/bash -lc 'rg -n "implementation_required\|TechDraw_ActiveView\|fc_web_dispatch_json\|desktop" freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/desktop-command-dispatcher.ts web/src/techdraw-python-family-facade.ts web/src/techdraw-python.worker.ts' |
| 2 | source/read | 1.978 | 0.001 | 0 | /bin/bash -lc "sed -n '3460,3565p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.166 | scheduler.cycle.started | thread.started |
| 0.196 | 19.314 | turn.started | agent_message |
| 19.510 | 5.036 | item.completed | command_execution |
| 24.568 | 51.260 | command:source/read | agent_message |
| 75.828 | 1.978 | item.completed | command_execution |
| 77.807 | 34.061 | command:source/read | file_change |
| 111.874 | 11.981 | item.completed | agent_message |
| 123.855 | 0.726 | item.completed | turn.completed |
| 124.581 | 1.478 | turn.completed | scheduler.cycle.completed |

## Cycle 4996

Task: FW-P6-FPA-Y; batch: {'id': '7ec9fdcd9c6935d577ce0a3b', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.428 |
| batchPreflight | 0.041 |
| implementationPacket | 0.505 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|

## Cycle 4997

Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
Observed command time (union): 0.000 s; between-event time: 28.041 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.500 |
| batchPreflight | 0.042 |
| implementationPacket | 0.320 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.158 | scheduler.cycle.started | thread.started |
| 0.175 | 25.866 | turn.started | agent_message |
| 26.041 | 0.627 | item.completed | turn.completed |
| 26.668 | 1.373 | turn.completed | scheduler.cycle.completed |

## Cycle 4998

Task: FW-P6-FPA-Y; batch: {'id': '9970555a88788d5442ee1b4e', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 1.041 s; between-event time: 145.060 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.462 |
| batchPreflight | 0.042 |
| implementationPacket | 0.158 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/failure-reconciliation | 0.367 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.502 | 0.001 | 0 | /bin/bash -lc "sed -n '1,240p' docs/current/provided-source-index.md; printf '\\n--- techdraw files ---\\n'; rg --files web freecad-source tools docs/business-acceptance \| rg 'TechDraw\|techdraw\|DrawHatchTest\|business-acceptance' \| head -120" |
| 2 | source/read | 42.105 | 0.001 | 0 | /bin/bash -lc "rg --files web/src web/public freecad-source/src/WebAssembly tools docs/business-acceptance \| rg -i 'techdraw\|hatch\|business'; ls web/public/modules/TechDraw 2>/dev/null \|\| true; ls freecad-source/build-web/techdraw-native-configure/bin 2>/dev/null \| head" |
| 3 | source/read | 20.086 | 0.253 | 1 | /bin/bash -lc "sha256sum freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.js freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.wasm web/public/modules/TechDraw/FreeCADWebTechDrawRuntimeProbe.js web/public/modules/TechDraw/FreeCADWebTechDrawRuntimeProbe.wasm; test -f docs/business-acceptance/TechDraw.json && sed -n '1,220p' docs/business-acceptance/TechDraw.json; python3 tools/failure_reconciliation.py --check --module TechDraw" |
| 4 | other | 10.181 | 0.786 | 1 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 607fba7cdc043a11367f --disposition superseded --reason '探针构建产物已在索引确认的 freecad-source/build-web/techdraw-native-configure/bin 中存在；web/public/modules/TechDraw 发布路径当前不存在，属于旧发布路径诊断，不能代表当前业务失败。' --source docs/current/provided-source-index.md --source docs/business-acceptance/TechDraw.json --source freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.js; python3 tools/failure_reconciliation.py --review ecf4a464949efb7a7036 --disposition not_applicable --reason '该搜索命令因未限定索引确认的 TechDraw 源码子路径而触发 more-than-5000 工具保护；不是业务或运行时失败。当前验收合同和用例已由 docs/business-acceptance/TechDraw.json 定位。' --source docs/current/provided-source-index.md --source docs/business-acceptance/TechDraw.json; python3 tools/failure_reconciliation.py --check --module TechDraw" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.152 | scheduler.cycle.started | thread.started |
| 0.195 | 7.880 | turn.started | agent_message |
| 8.076 | 3.502 | item.completed | command_execution |
| 11.578 | 42.105 | command:source/read | command_execution |
| 53.684 | 20.086 | command:source/read | command_execution |
| 74.024 | 35.430 | command:source/read | agent_message |
| 109.454 | 10.181 | item.completed | command_execution |
| 120.421 | 23.849 | command:other | agent_message |
| 144.270 | 0.623 | item.completed | turn.completed |
| 144.893 | 1.208 | turn.completed | scheduler.cycle.completed |

## Cycle 4999

Task: FW-P6-FPA-Y; batch: {'id': 'dbbb44fdc4bf66614bf8dabc', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 11}.
Observed command time (union): 0.012 s; between-event time: 75.037 s; file changes: 1.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 0.499 |
| batchPreflight | 0.042 |
| implementationPacket | 0.269 |

### postPipelineTiming

| Step | Seconds |
|---|---:|
| post-pipeline/preflight | 0.038 |
| post-pipeline/build | 23.295 |
| post-pipeline/artifact-sync | 1.128 |
| post-pipeline/business-acceptance | 1.270 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 2.209 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/part-business-cases.mjs" |
| 2 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/Part.json' |
| 3 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc 'cat docs/current/provided-source-index.md' |
| 4 | source/read | 7.493 | 0.001 | 0 | /bin/bash -lc "rg -n 'Part_Import\|Part_Export\|CurveNet\|saveReopen\|part\\.(document\|export\|import)\|session' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp" |
| 5 | source/read | 11.155 | 0.002 | 0 | /bin/bash -lc "sed -n '2300,2470p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
| 6 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '2885,3010p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
| 7 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,235p' web/src/desktop-command-dispatcher.ts" |
| 8 | source/read | 10.439 | 0.002 | 0 | /bin/bash -lc "sed -n '343,420p;1270,1325p;1565,1595p;1645,1690p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp" |
| 9 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "rg -n 'Part\|brep\|desktopDispatcher\|desktopCommandDispatcher\|execute\\(' web/src/workbench-shell.tsx" |
| 10 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,110p' freecad-source/src/Mod/Part/App/FeaturePartCurveNet.cpp" |
| 11 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '2210,2295p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.150 | scheduler.cycle.started | thread.started |
| 0.184 | 6.105 | turn.started | agent_message |
| 6.289 | 2.209 | item.completed | command_execution |
| 8.499 | 0.137 | command:source/read | command_execution |
| 8.637 | 0.138 | command:source/read | command_execution |
| 8.776 | 7.493 | command:source/read | command_execution |
| 16.271 | 11.155 | command:source/read | command_execution |
| 27.428 | 0.138 | command:source/read | command_execution |
| 27.567 | 0.137 | command:source/read | command_execution |
| 27.705 | 10.439 | command:source/read | command_execution |
| 38.146 | 0.139 | command:source/read | command_execution |
| 38.285 | 0.137 | command:source/read | command_execution |
| 38.423 | 0.138 | command:source/read | command_execution |
| 38.561 | 13.817 | command:source/read | agent_message |
| 52.378 | 1.851 | item.completed | file_change |
| 54.231 | 20.819 | item.completed | scheduler.cycle.completed |

## Cycle 5000

Task: FW-P6-FPA-Y; batch: {'id': '4eda40a94b18af525c195e8b', 'module': 'Part', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.864 s; between-event time: 179.256 s; file changes: 0.

### preparationTiming

| Step | Seconds |
|---|---:|
| continue | 3.476 |
| batchPreflight | 0.042 |
| implementationPacket | 0.160 |

### Commands

| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|---:|---|---:|---:|---:|---|
| 1 | source/read | 3.330 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md && printf '\\n--part refs--\\n' && rg -n \"PartBoxProbe\|part.pythonFamily\|FreeCADWebPartBoxProbe\" docs tools freecad-source web \| head -80" |
| 2 | source/read | 22.168 | 0.858 | 1 | /bin/bash -lc "python3 tools/fast_source_search.py 'PartBoxProbe\|part.pythonFamily\|FreeCADWebPartBoxProbe' --paths freecad-source/src/Mod freecad-source/src/WebAssembly web docs/business-acceptance freecad-source/build-web web/public/kernel" |
| 3 | source/read | 54.060 | 0.001 | 0 | /bin/bash -lc "rg -n 'PartBoxProbe\|part.pythonFamily\|FreeCADWebPartBoxProbe' freecad-source/src/WebAssembly web/src docs/business-acceptance freecad-source/build-web web/public/kernel 2>/dev/null \| head -100" |
| 4 | other | 43.617 | 0.001 | 0 | /bin/bash -lc "find freecad-source/src -iname '*Part*Probe*' -o -iname 'PartBoxProbe.cpp'; find web/public/kernel -name '*Part*' \| head; find freecad-source/build-web -maxdepth 3 -type f -name CMakeCache.txt" |
| 5 | source/read | 4.656 | 0.001 | 0 | /bin/bash -lc "test -f freecad-source/build-web/configure/CMakeCache.txt && echo cache-ok; rg -n 'PartBoxProbe' freecad-source/build-web/configure/CMakeFiles/TargetDirectories.txt freecad-source/build-web/configure/build.ninja 2>/dev/null \| head; sed -n '1,160p' tools/wasm-probe-runtime.mjs; python3 tools/failure_reconciliation.py --help" |

### Between-Event Intervals

| Offset (s) | Seconds | After | Before |
|---:|---:|---|---|
| 0.000 | 0.148 | scheduler.cycle.started | thread.started |
| 0.178 | 24.686 | turn.started | agent_message |
| 24.865 | 3.330 | item.completed | command_execution |
| 28.195 | 22.168 | command:source/read | command_execution |
| 51.222 | 54.060 | command:source/read | command_execution |
| 105.284 | 43.617 | command:source/read | command_execution |
| 148.902 | 16.353 | command:other | agent_message |
| 165.254 | 4.656 | item.completed | command_execution |
| 169.912 | 10.208 | command:source/read | scheduler.cycle.completed |