901 lines
53 KiB
Markdown
901 lines
53 KiB
Markdown
# Unattended Execution Timing
|
||
|
||
Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.
|
||
|
||
Cycles: 20; aggregate measured time: 2533.760 s.
|
||
|
||
| Phase | Total (s) | Share | Count | Average (s) | Maximum (s) |
|
||
|---|---:|---:|---:|---:|---:|
|
||
| request/first-activity-wait | 654.279 | 25.82% | 5 | 130.856 | 130.869 |
|
||
| agent/post-read | 513.604 | 20.27% | 79 | 6.501 | 64.574 |
|
||
| agent/initial-decision | 365.031 | 14.41% | 13 | 28.079 | 119.705 |
|
||
| agent/idle-stop | 207.174 | 8.18% | 3 | 69.058 | 130.661 |
|
||
| agent/editing | 184.411 | 7.28% | 9 | 20.490 | 48.262 |
|
||
| agent/decision | 137.396 | 5.42% | 39 | 3.523 | 24.218 |
|
||
| scheduler/provider-backoff | 118.200 | 4.67% | 5 | 23.640 | 39.976 |
|
||
| pre-agent-pipeline/build | 101.377 | 4.00% | 2 | 50.689 | 54.128 |
|
||
| agent/synthesis | 78.082 | 3.08% | 13 | 6.006 | 13.715 |
|
||
| agent/failure-recovery | 59.619 | 2.35% | 4 | 14.905 | 22.474 |
|
||
| agent/post-edit | 43.416 | 1.71% | 7 | 6.202 | 16.712 |
|
||
| other | 20.831 | 0.82% | 28 | 0.744 | 7.401 |
|
||
| preparation/continue | 12.515 | 0.49% | 18 | 0.695 | 3.359 |
|
||
| pre-agent-pipeline/business-acceptance | 9.724 | 0.38% | 2 | 4.862 | 7.727 |
|
||
| agent/finalization | 7.173 | 0.28% | 8 | 0.897 | 1.489 |
|
||
| preparation/implementationPacket | 5.597 | 0.22% | 18 | 0.311 | 0.862 |
|
||
| post-pipeline/failure-reconciliation | 3.092 | 0.12% | 6 | 0.515 | 1.542 |
|
||
| pre-agent-pipeline/artifact-sync | 3.035 | 0.12% | 2 | 1.518 | 1.848 |
|
||
| post-pipeline/capability-registry | 2.844 | 0.11% | 1 | 2.844 | 2.844 |
|
||
| scheduler/process-start | 2.629 | 0.10% | 18 | 0.146 | 0.157 |
|
||
| source/read | 1.962 | 0.08% | 86 | 0.023 | 0.933 |
|
||
| pre-agent-pipeline/business-audit | 0.847 | 0.03% | 2 | 0.423 | 0.424 |
|
||
| preparation/batchPreflight | 0.762 | 0.03% | 18 | 0.042 | 0.043 |
|
||
| post-pipeline/module-registry | 0.084 | 0.00% | 1 | 0.084 | 0.084 |
|
||
| pre-agent-pipeline/preflight | 0.076 | 0.00% | 2 | 0.038 | 0.038 |
|
||
| post-pipeline/acceptance-contract-preflight | 0.000 | 0.00% | 2 | 0.000 | 0.000 |
|
||
|
||
## Wall-Clock Coverage
|
||
|
||
First cycle start to last observed event: 2547.894 s.
|
||
Inside observed cycles: 2277.538 s; between cycles: 270.356 s.
|
||
|
||
| Previous Cycle | Next Cycle | Gap (s) |
|
||
|---:|---:|---:|
|
||
| 5024 | 5025 | 0.550 |
|
||
| 5025 | 5026 | 24.471 |
|
||
| 5026 | 5027 | 1.304 |
|
||
| 5027 | 5028 | 4.058 |
|
||
| 5028 | 5030 | 66.148 |
|
||
| 5030 | 5031 | 5.012 |
|
||
| 5031 | 5033 | 68.605 |
|
||
| 5033 | 5034 | 21.110 |
|
||
| 5034 | 5035 | 1.309 |
|
||
| 5035 | 5036 | 1.108 |
|
||
| 5036 | 5037 | 2.476 |
|
||
| 5037 | 5038 | 21.236 |
|
||
| 5038 | 5039 | 41.126 |
|
||
| 5039 | 5040 | 0.720 |
|
||
| 5040 | 5041 | 6.943 |
|
||
| 5041 | 5042 | 1.704 |
|
||
| 5042 | 5043 | 2.477 |
|
||
|
||
## Cycle 5024
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '43fd797161bd022c152bae6f', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 0.014 s; between-event time: 49.030 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.641 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.160 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 0.166 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | other | 1.525 | 0.000 | 0 | /bin/bash -lc pwd |
|
||
| 2 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc 'rg --files -g AGENTS.md -g provided-source-index.md -g WEB_BUSINESS_MIGRATION_RULES.md -g failure_reconciliation.py -g record_runtime_issue.py' |
|
||
| 3 | source/read | 8.857 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/provided-source-index.md" |
|
||
| 4 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
||
| 5 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/failure_reconciliation.py" |
|
||
| 6 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/record_runtime_issue.py" |
|
||
| 7 | other | 12.494 | 0.002 | 0 | /bin/bash -lc "node -e 'const fs=require(\"fs\"); const d=JSON.parse(fs.readFileSync(\"docs/current/freecad-web-scheduler-failures.json\")); for(const k of [\"2e587b1ad69c6574189b\",\"7c314934c31aa1f654ae\",\"55331822b024b5e0e018\",\"673c6b9cd65adc245b42\"]) console.log(JSON.stringify({key:k,...d.failures[k]}));'" |
|
||
| 8 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '300,510p' tools/failure_reconciliation.py" |
|
||
| 9 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "rg --files docs/business-acceptance tools web/src freecad-source/src/WebAssembly/FreeCADCoreProbe docs/p6 -g '*cam*' -g '*CAM*' -g '*Cam*'" |
|
||
| 10 | source/read | 9.598 | 0.001 | 0 | /bin/bash -lc 'python3 tools/fast_source_search.py --help' |
|
||
| 11 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' tools/run_p6_cam_geometry_recompute_module_batch_gate.mjs" |
|
||
| 12 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' web/src/cam-python-family-batch-facade.ts" |
|
||
| 13 | other | 0.137 | 0.001 | 0 | /bin/bash -lc "node -e 'const fs=require(\"fs\"); for(const p of [\"tools/run_p6_cam_generic_object_module_batch_gate.mjs\",\"web/src/cam.worker.ts\",\"web/src/cam-python-family-facade.ts\",\"freecad-source/src/WebAssembly/FreeCADCoreProbe/CamKernelProbe.cpp\",\"docs/p6/cam-generic-object-module-batch-f2747e2b270bf77f3a18a277-runtime.json\",\"tools/run_p6_cam_geometry_value_module_batch_gate.mjs\",\"freecad-source/src/WebAssembly/FreeCADCoreProbe/cam-runtime-smoke.js\",\"docs/business-acceptance/CAM.json\"]) console.log(p,fs.existsSync(p)); const d=JSON.parse(fs.readFileSync(\"docs/current/feature-capability-registry.json\"));console.log(JSON.stringify(d.records.filter(r=>r.module===\"CAM\").map(r=>({id:r.id,command:r.command}))))'" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.156 | scheduler.cycle.started | thread.started |
|
||
| 0.183 | 6.589 | turn.started | agent_message |
|
||
| 6.771 | 1.525 | item.completed | command_execution |
|
||
| 8.297 | 0.138 | command:other | command_execution |
|
||
| 8.436 | 8.857 | command:source/read | command_execution |
|
||
| 17.295 | 0.138 | command:source/read | command_execution |
|
||
| 17.433 | 0.137 | command:source/read | command_execution |
|
||
| 17.572 | 0.138 | command:source/read | command_execution |
|
||
| 17.710 | 12.494 | command:source/read | command_execution |
|
||
| 30.207 | 0.138 | command:other | command_execution |
|
||
| 30.346 | 0.138 | command:source/read | command_execution |
|
||
| 30.485 | 8.175 | command:source/read | agent_message |
|
||
| 38.660 | 9.598 | item.completed | command_execution |
|
||
| 48.260 | 0.140 | command:source/read | command_execution |
|
||
| 48.401 | 0.137 | command:source/read | command_execution |
|
||
| 48.538 | 0.137 | command:source/read | command_execution |
|
||
| 48.677 | 0.367 | command:other | scheduler.cycle.completed |
|
||
|
||
## Cycle 5025
|
||
|
||
Task: UNATTENDED-OPTIMIZATION; batch: {'id': '43fd797161bd022c152bae6f', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 0.000 s; between-event time: 131.054 s; file changes: 0.
|
||
|
||
### waitingTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| scheduler/provider-backoff | 18.255 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.156 | scheduler.cycle.started | thread.started |
|
||
| 0.193 | 130.861 | turn.started | scheduler.cycle.completed |
|
||
|
||
## Cycle 5026
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '1cc3d2a141cef88addd2b0d1', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
|
||
Observed command time (union): 0.007 s; between-event time: 180.063 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.534 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.311 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 5.011 | 0.001 | 0 | /bin/bash -lc 'rg -n "ExtentGroup\|HorizontalExtent\|StackBottom\|StackDown\|StackGroup\|StackTop\|StackUp\|VerticalExtent\|dispatch_json\|DesktopCommand" freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx web/src/techdraw-python.worker.ts' |
|
||
| 2 | source/read | 55.241 | 0.003 | 0 | /bin/bash -lc "sed -n '3160,3460p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp; sed -n '140,210p' web/src/desktop-command-dispatcher.ts" |
|
||
| 3 | source/read | 64.574 | 0.001 | 0 | /bin/bash -lc "sed -n '3460,3545p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.165 | scheduler.cycle.started | thread.started |
|
||
| 0.186 | 41.587 | turn.started | agent_message |
|
||
| 41.773 | 5.011 | item.completed | command_execution |
|
||
| 46.786 | 55.241 | command:source/read | command_execution |
|
||
| 102.031 | 64.574 | command:source/read | command_execution |
|
||
| 166.606 | 13.464 | command:source/read | scheduler.cycle.completed |
|
||
|
||
## Cycle 5027
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '5b08831a9b75992a626bd068', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 3.705 s; between-event time: 86.392 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.467 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.160 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 1.542 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | other | 1.328 | 0.000 | 0 | /bin/bash -lc 'pwd;' |
|
||
| 2 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc 'rg --files -g AGENTS.md -g provided-source-index.md -g WEB_BUSINESS_MIGRATION_RULES.md -g failure_reconciliation.py -g record_runtime_issue.py' |
|
||
| 3 | source/read | 6.798 | 0.003 | 0 | /bin/bash -lc 'cat docs/current/provided-source-index.md docs/WEB_BUSINESS_MIGRATION_RULES.md' |
|
||
| 4 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,260p' tools/failure_reconciliation.py" |
|
||
| 5 | source/read | 11.183 | 0.001 | 0 | /bin/bash -lc "sed -n '1,210p' tools/fast_source_search.py" |
|
||
| 6 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '320,510p' tools/failure_reconciliation.py" |
|
||
| 7 | other | 0.138 | 0.001 | 0 | /bin/bash -lc "node -e 'const fs=require(\"fs\"); const m=JSON.parse(fs.readFileSync(\"web/public/modules/manifest.json\")); console.log(JSON.stringify(m.modules.TechDraw,null,2)); const f=JSON.parse(fs.readFileSync(\"docs/current/freecad-web-scheduler-failures.json\")); for(const k of [\"ed737fe4c31e06c34085\",\"1888508f0541ad402479\",\"1adb53e1cdbdf69efa49\",\"607fba7cdc043a11367f\"]) console.log(k,JSON.stringify(f.failures[k]));'" |
|
||
| 8 | source/read | 12.761 | 0.001 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'useTechDrawSvgStackDispatcher\|useTechDrawStackDispatcher' --path web/src --max-count 65 --context 1" |
|
||
| 9 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py 'TaskDimReference\|References2D\|References3D' --path freecad-source/src/Mod/TechDraw/Gui/TaskDimReference.cpp --path tools/techdraw-browser-cases.mjs --max-count 35 --context 1" |
|
||
| 10 | source/read | 0.139 | 0.307 | 0 | /bin/bash -lc 'sha256sum freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.js freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.wasm web/public/kernel/FreeCADWebTechDrawRuntimeProbe.js web/public/kernel/FreeCADWebTechDrawRuntimeProbe.wasm web/public/kernel/FreeCADWebTechDrawRuntimeProbe.worker.js' |
|
||
| 11 | other | 1.259 | 0.001 | 1 | /bin/bash -lc 'test -f freecad-source/src/Mod/TechDraw/Gui/TaskDimReference.cpp' |
|
||
| 12 | other | 14.285 | 2.188 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 607fba7cdc043a11367f --disposition superseded --reason '旧 sha256sum 诊断使用 web/public/modules/TechDraw 下的错误产物路径。当前 provided-source-index 指明发布目录 web/public/kernel，manifest 的 TechDraw 全部五个 Worker 均引用 /kernel/FreeCADWebTechDrawRuntimeProbe。2026-09-08 实际 sha256sum 成功：构建目录 techdraw-native-configure/bin 与 web/public/kernel 的 JS 均为 1c5af7cb25656435b68f4f6b6f3e07d5755e82d910158116cadfa79526967133，WASM 均为 4a49f62ddff09e75e55c815b0d13ebbbbe118a029ffe5e66ac2667d105172578，发布 pthread Worker 为 547f7c66230fd5acfd2243af7c110eb073c865d51cc895e5dc0f6e9caecae19b，均符合 manifest。该证据替代旧路径诊断，仅确认产物位置与一致性，不宣称业务验收通过。' --source docs/current/provided-source-index.md --source web/public/modules/manifest.json --source freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.js --source freecad-source/build-web/techdraw-native-configure/bin/FreeCADWebTechDrawRuntimeProbe.wasm --source web/public/kernel/FreeCADWebTechDrawRuntimeProbe.js --source web/public/kernel/FreeCADWebTechDrawRuntimeProbe.wasm --source web/public/kernel/FreeCADWebTechDrawRuntimeProbe.worker.js" |
|
||
| 13 | other | 0.157 | 1.194 | 0 | /bin/bash -lc 'python3 tools/failure_reconciliation.py --keys ed737fe4c31e06c34085 1888508f0541ad402479 1adb53e1cdbdf69efa49 607fba7cdc043a11367f' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.151 | scheduler.cycle.started | thread.started |
|
||
| 0.174 | 5.795 | turn.started | agent_message |
|
||
| 5.969 | 1.328 | item.completed | command_execution |
|
||
| 7.298 | 0.138 | command:other | command_execution |
|
||
| 7.436 | 6.798 | command:source/read | command_execution |
|
||
| 14.238 | 0.138 | command:source/read | command_execution |
|
||
| 14.378 | 11.183 | command:source/read | command_execution |
|
||
| 25.562 | 0.138 | command:source/read | command_execution |
|
||
| 25.701 | 0.138 | command:source/read | command_execution |
|
||
| 25.840 | 12.761 | command:other | command_execution |
|
||
| 38.603 | 0.138 | command:source/read | command_execution |
|
||
| 38.741 | 0.139 | command:source/read | command_execution |
|
||
| 39.187 | 10.607 | command:source/read | agent_message |
|
||
| 49.794 | 1.259 | item.completed | command_execution |
|
||
| 51.056 | 8.472 | command:other | agent_message |
|
||
| 59.528 | 14.285 | item.completed | command_execution |
|
||
| 76.002 | 0.157 | command:other | command_execution |
|
||
| 77.354 | 10.841 | command:other | agent_message |
|
||
| 88.194 | 0.830 | item.completed | turn.completed |
|
||
| 89.024 | 1.073 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5028
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'dbbb44fdc4bf66614bf8dabc', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 11}.
|
||
Observed command time (union): 0.011 s; between-event time: 130.109 s; file changes: 3.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.502 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.862 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/acceptance-contract-preflight | 0.000 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 1.686 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
||
| 2 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc 'cat docs/WEB_BUSINESS_MIGRATION_RULES.md docs/business-acceptance/Part.json tools/part-business-cases.mjs' |
|
||
| 3 | source/read | 7.840 | 0.001 | 0 | /bin/bash -lc "rg -n 'saveReopen\|ImportCurveNet\|Part_Export\|Part_Import\|sourcePath\|IGES\|OBJ' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands* web/src/part-save-facade.ts tools/*part*" |
|
||
| 4 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc 'cat web/src/part-save-facade.ts web/src/part-io-facade.ts' |
|
||
| 5 | source/read | 11.937 | 0.002 | 0 | /bin/bash -lc "sed -n '1250,1330p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp; sed -n '1560,1600p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp; sed -n '1640,1690p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp; sed -n '2880,2970p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp" |
|
||
| 6 | source/read | 0.138 | 0.001 | 0 | /bin/bash -lc "rg -n 'document\|save\|export\|import' web/src/part-document* tools/*part*business* freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.h; rg -n 'Part_Import\|Part_Export\|ImportCurveNet' freecad-source/src/Mod/Part/Gui/Command*.cpp; rg -n 'PartDesktop\|part.desktop\|document' web/src/desktop-command-dispatcher.ts web/src/part-worker.ts; ls -l freecad-source/build-web/configure/bin/FreeCADWebPart*" |
|
||
| 7 | other | 0.055 | 0.001 | 0 | /bin/bash -lc 'node --check tools/part-business-cases.mjs' |
|
||
| 8 | source/read | 0.139 | 0.000 | 64 | /bin/bash -lc 'git diff --check' |
|
||
| 9 | source/read | 0.036 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- docs/business-acceptance/Part.json tools/part-business-cases.mjs web/src/part-io-facade.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.161 | scheduler.cycle.started | thread.started |
|
||
| 0.185 | 6.043 | turn.started | agent_message |
|
||
| 6.229 | 1.686 | item.completed | command_execution |
|
||
| 7.915 | 0.137 | command:source/read | command_execution |
|
||
| 8.054 | 7.840 | command:source/read | command_execution |
|
||
| 15.896 | 0.138 | command:source/read | command_execution |
|
||
| 16.035 | 11.937 | command:source/read | command_execution |
|
||
| 27.975 | 0.138 | command:source/read | command_execution |
|
||
| 28.114 | 10.449 | command:source/read | agent_message |
|
||
| 38.563 | 48.262 | item.completed | file_change |
|
||
| 86.833 | 16.474 | item.completed | file_change |
|
||
| 103.308 | 0.055 | item.completed | command_execution |
|
||
| 103.365 | 0.139 | command:other | command_execution |
|
||
| 103.505 | 9.422 | command:source/read | agent_message |
|
||
| 112.927 | 8.201 | item.completed | file_change |
|
||
| 121.172 | 7.423 | command:source/read | agent_message |
|
||
| 128.595 | 0.726 | item.completed | turn.completed |
|
||
| 129.321 | 0.799 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5029
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '134d419c8569a1279fca36a8', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
|
||
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 3.359 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.819 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
|
||
## Cycle 5030
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '82bacc06e574d94e082112c9', 'module': 'Part', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 2.078 s; between-event time: 64.991 s; file changes: 1.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.650 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.160 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 0.170 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 1.263 | 0.000 | 0 | /bin/bash -lc 'pwd; rg --files -g AGENTS.md -g provided-source-index.md -g failure_reconciliation.py -g WEB_BUSINESS_MIGRATION_RULES.md -g fast_source_search.py' |
|
||
| 2 | source/read | 7.983 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
||
| 3 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' tools/failure_reconciliation.py" |
|
||
| 4 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md; sed -n '1,160p' tools/fast_source_search.py" |
|
||
| 5 | source/read | 13.867 | 0.003 | 0 | /bin/bash -lc "sed -n '240,470p' tools/failure_reconciliation.py; jq '.failures \| with_entries(select(.key == \"8885068bf120ba1a6bfb\" or .key == \"2d515e7619a0a83f6106\" or .key == \"2fcc11c7c72cd9b2809a\" or .key == \"37107495f7e52253829b\"))' docs/current/freecad-web-scheduler-failures.json" |
|
||
| 6 | source/read | 0.141 | 0.001 | 0 | /bin/bash -lc "rg -n 'TopoShapeShell\|getFreeEdges\|getBadEdges\|HashableShape\|ShapeEnum\|SingleShapeCompound' freecad-source/src/Mod/Part/App/TopoShapeShell.cpp freecad-source/src/Mod/Part/App/TopoShapeShellPyImp.cpp freecad-source/src/Mod/Part/BOPTools/Utils.py freecad-source/src/Mod/Part/PartEnums.py; rg -n -m 4 'PartBoxProbe\|part.pythonFamily\|FreeCADWebPartBoxProbe' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartBoxProbe.cpp; stat -c '%n %s' freecad-source/build-web/configure/CMakeCache.txt freecad-source/build-web/configure/build.ninja web/public/kernel/FreeCADWebPartBoxProbe.js web/public/kernel/FreeCADWebPartBoxProbe.wasm" |
|
||
| 7 | other | 0.081 | 0.001 | 0 | /bin/bash -lc "python3 -c 'from tools.failure_reconciliation import classify, read, entries, SOURCE; rows=entries(read(SOURCE)); key=\"8885068bf120ba1a6bfb\"; assert classify(rows[key])[0] == \"diagnostic_tool\"; assert classify({\"command\":\"node web/public/kernel/probe.js\", \"lastError\":rows[key][\"lastError\"]})[0] == \"business_runtime\"; print(\"classification checks passed\")'" |
|
||
| 8 | source/read | 0.158 | 0.933 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 8885068bf120ba1a6bfb --disposition superseded --reason '原始命令在枚举 src/Mod 时触发 fast_source_search.py 的 5000 文件范围保护，未执行 Part 业务。已依据本地资料索引定位 FreeCADCoreProbe 和 Part 具体入口；该宽范围检索由索引定点定位流程替代。分类器现按实际工具与明确超限消息归为诊断，不代表业务通过。' --source tools/fast_source_search.py --source docs/current/provided-source-index.md --source tools/failure_reconciliation.py" |
|
||
| 9 | other | 0.157 | 0.585 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 2d515e7619a0a83f6106 --disposition superseded --reason 'argparse 的 --source 使用 action=append，每次仅接收一个路径；旧命令在单个 --source 后传入多个路径，解析即退出。本次使用重复 --source 成功提交审查，替代错误调用；不据此关闭该旧命令所引用的其它构建或业务失败。' --source tools/failure_reconciliation.py --source docs/current/provided-source-index.md" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
|
||
| 0.183 | 5.263 | turn.started | agent_message |
|
||
| 5.446 | 1.263 | item.completed | command_execution |
|
||
| 6.710 | 7.983 | command:source/read | command_execution |
|
||
| 14.695 | 0.139 | command:source/read | command_execution |
|
||
| 14.834 | 0.138 | command:source/read | command_execution |
|
||
| 14.973 | 13.867 | command:source/read | command_execution |
|
||
| 28.843 | 0.141 | command:source/read | command_execution |
|
||
| 28.985 | 11.171 | command:source/read | agent_message |
|
||
| 40.156 | 24.288 | item.completed | file_change |
|
||
| 64.446 | 0.081 | item.completed | command_execution |
|
||
| 64.528 | 0.158 | command:other | command_execution |
|
||
| 65.620 | 0.157 | command:source/read | command_execution |
|
||
| 66.363 | 0.158 | command:other | command_execution |
|
||
|
||
## Cycle 5031
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '9b81e397445349c9189e89e9', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
|
||
Observed command time (union): 0.008 s; between-event time: 158.064 s; file changes: 2.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.534 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.316 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/module-registry | 0.084 |
|
||
| post-pipeline/capability-registry | 2.844 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 5.462 | 0.001 | 0 | /bin/bash -lc 'rg -n "TechDraw_(AlignVertexesHorizontally\|GeometricHatch\|Hatch\|StackBottom\|StackDown\|StackGroup\|StackTop\|ToggleFrame)\|TechDrawDesktopCommands\|family dispatch\|desktop" freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx web/src/techdraw-python-family-facade.ts web/src/techdraw-python.worker.ts' |
|
||
| 2 | source/read | 31.670 | 0.003 | 0 | /bin/bash -lc "sed -n '3060,3270p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp; sed -n '3270,3460p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp; sed -n '175,210p' web/src/desktop-command-dispatcher.ts" |
|
||
| 3 | source/read | 15.191 | 0.001 | 0 | /bin/bash -lc "rg -n 'TechDraw_(AlignVertexesHorizontally\|ToggleFrame)\|implementationBoundary' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp \| tail -20" |
|
||
| 4 | source/read | 8.903 | 0.001 | 0 | /bin/bash -lc "sed -n '3490,3590p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.151 | scheduler.cycle.started | thread.started |
|
||
| 0.174 | 18.796 | turn.started | agent_message |
|
||
| 18.969 | 5.462 | item.completed | command_execution |
|
||
| 24.433 | 31.670 | command:source/read | command_execution |
|
||
| 56.107 | 18.261 | command:source/read | agent_message |
|
||
| 74.368 | 25.790 | item.completed | file_change |
|
||
| 100.164 | 15.191 | item.completed | command_execution |
|
||
| 115.356 | 8.903 | command:source/read | command_execution |
|
||
| 124.261 | 15.037 | command:source/read | file_change |
|
||
| 139.304 | 16.712 | item.completed | agent_message |
|
||
| 156.017 | 1.204 | item.completed | turn.completed |
|
||
| 157.221 | 0.851 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5032
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'd31e8c571e264673ce0e24ce', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
|
||
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.507 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.225 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
|
||
## Cycle 5033
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '2d8630f5ceb0dd8cb0df08e9', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-mixed', 'records': 8}.
|
||
Observed command time (union): 0.000 s; between-event time: 131.062 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.502 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.316 |
|
||
|
||
### waitingTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| scheduler/provider-backoff | 19.990 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.151 | scheduler.cycle.started | thread.started |
|
||
| 0.182 | 130.879 | turn.started | scheduler.cycle.completed |
|
||
|
||
## Cycle 5034
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '2ab1d3fb8721d98f0121b67c', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 0.001 s; between-event time: 180.078 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.688 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.162 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 2.766 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/provided-source-index.md; python3 tools/failure_reconciliation.py --help; rg -n \"useTechDraw(Svg)?StackDispatcher\|TaskDimReference\|References2D\|References3D\" web/src docs/business-acceptance tools freecad-source/src/Mod/TechDraw 2>/dev/null" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
|
||
| 0.183 | 114.054 | turn.started | agent_message |
|
||
| 114.237 | 2.766 | item.completed | command_execution |
|
||
| 117.004 | 63.075 | command:source/read | scheduler.cycle.completed |
|
||
|
||
## Cycle 5035
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'c61b65093c2d44aae26dc4df', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
|
||
Observed command time (union): 0.001 s; between-event time: 140.140 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.504 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.307 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 2.010 | 0.000 | 0 | /bin/bash -lc 'rg -n "Part\|failureReconciliation\|implementationGaps\|observedIssues\|previousAttempt" docs/current docs/business-acceptance tools 2>/dev/null \| head -200' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.146 | scheduler.cycle.started | thread.started |
|
||
| 0.176 | 7.202 | turn.started | agent_message |
|
||
| 7.379 | 2.010 | item.completed | command_execution |
|
||
| 9.389 | 130.752 | command:source/read | scheduler.cycle.completed |
|
||
|
||
## Cycle 5036
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'cfffb76f8793ba4bdb97a7c9', 'module': 'Part', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 0.014 s; between-event time: 60.104 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.667 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.162 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 0.519 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | other | 2.929 | 0.000 | 0 | /bin/bash -lc pwd |
|
||
| 2 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md" |
|
||
| 3 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,210p' tools/failure_reconciliation.py" |
|
||
| 4 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "rg --files -g AGENTS.md -g '*failure*' docs/current tools" |
|
||
| 5 | source/read | 21.855 | 0.002 | 0 | /bin/bash -lc "sed -n '290,390p' tools/failure_reconciliation.py" |
|
||
| 6 | other | 0.140 | 0.001 | 0 | /bin/bash -lc "python3 -c 'import json,pathlib; keys=[\"4e29eab8fbf1470495e4\",\"78fd06ffd9e08c3d9934\",\"868203cd453d688f042f\",\"8c5ab9cfa7592bd3388c\"]; p=json.loads(pathlib.Path(\"docs/current/freecad-web-scheduler-failures.json\").read_text()); f=p.get(\"failures\",{}); print(json.dumps({k:f.get(k) for k in keys},ensure_ascii=False,indent=2))'" |
|
||
| 7 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,140p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
||
| 8 | source/read | 0.139 | 0.000 | 2 | /bin/bash -lc 'ls AGENTS.md tools/AGENTS.md docs/AGENTS.md docs/current/AGENTS.md' |
|
||
| 9 | source/read | 19.251 | 0.001 | 0 | /bin/bash -lc "sed -n '405,485p' tools/failure_reconciliation.py" |
|
||
| 10 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "rg -n 'extrude\|makePrism' freecad-source/src/Mod/Part/App/TopoShape.h freecad-source/src/Mod/Part/App/TopoShape.cpp" |
|
||
| 11 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "sed -n '1,95p' tools/part-python-family-facade-smoke-worker.mjs" |
|
||
| 12 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,90p' tools/wasm-probe-runtime.mjs" |
|
||
| 13 | other | 0.139 | 0.001 | 0 | /bin/bash -lc "python3 -c 'from pathlib import Path; import json; paths=[\"tools/check_web_link_closure.py\",\"tools/wasm-probe-runtime.mjs\",\"tools/record_runtime_issue.py\",\"docs/business-acceptance/Part.json\",\"tools/run_p6_part_module_gate.mjs\",\"tools/run_p6_part_python_facade_smoke.mjs\"]; print(json.dumps([{ \"path\":s,\"exists\":Path(s).is_file(),\"bytes\":len(Path(s).read_bytes()) if Path(s).is_file() else None} for s in paths],indent=2)); p=Path(\"docs/business-acceptance/Part.json\"); print(p.read_text()[:4500] if p.is_file() else \"missing\")'" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.152 | scheduler.cycle.started | thread.started |
|
||
| 0.181 | 13.614 | turn.started | agent_message |
|
||
| 13.795 | 2.929 | item.completed | command_execution |
|
||
| 16.725 | 0.139 | command:other | command_execution |
|
||
| 16.865 | 0.139 | command:source/read | command_execution |
|
||
| 17.005 | 0.140 | command:source/read | command_execution |
|
||
| 17.146 | 21.855 | command:source/read | command_execution |
|
||
| 39.003 | 0.140 | command:source/read | command_execution |
|
||
| 39.144 | 0.139 | command:other | command_execution |
|
||
| 39.284 | 0.139 | command:source/read | command_execution |
|
||
| 39.424 | 19.251 | command:source/read | command_execution |
|
||
| 58.676 | 0.140 | command:source/read | command_execution |
|
||
| 58.817 | 0.140 | command:source/read | command_execution |
|
||
| 58.957 | 0.139 | command:source/read | command_execution |
|
||
| 59.097 | 0.139 | command:source/read | command_execution |
|
||
| 59.238 | 0.880 | command:other | scheduler.cycle.completed |
|
||
|
||
## Cycle 5037
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
|
||
Observed command time (union): 0.000 s; between-event time: 131.061 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.543 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.335 |
|
||
|
||
### waitingTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| scheduler/provider-backoff | 19.990 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.162 | scheduler.cycle.started | thread.started |
|
||
| 0.196 | 130.866 | turn.started | scheduler.cycle.completed |
|
||
|
||
## Cycle 5038
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
|
||
Observed command time (union): 0.000 s; between-event time: 131.060 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.177 |
|
||
| batchPreflight | 0.042 |
|
||
| implementationPacket | 0.330 |
|
||
|
||
### waitingTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| scheduler/provider-backoff | 39.976 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.142 | scheduler.cycle.started | thread.started |
|
||
| 0.178 | 130.882 | turn.started | scheduler.cycle.completed |
|
||
|
||
## Cycle 5039
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '346a63afe9d0487228e4c4e3', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 2.881 s; between-event time: 92.212 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.701 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.164 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 0.173 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | other | 1.789 | 0.000 | 0 | /bin/bash -lc pwd |
|
||
| 2 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "rg --files -g AGENTS.md -g provided-source-index.md -g WEB_BUSINESS_MIGRATION_RULES.md -g failure_reconciliation.py -g record_runtime_issue.py -g '*techdraw*business*' -g TechDraw.json -g manifest.json" |
|
||
| 3 | source/read | 7.834 | 0.001 | 0 | /bin/bash -lc "sed -n '1,210p' docs/current/provided-source-index.md" |
|
||
| 4 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' tools/failure_reconciliation.py" |
|
||
| 5 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/business-acceptance/TechDraw.json" |
|
||
| 6 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
||
| 7 | source/read | 8.745 | 0.001 | 0 | /bin/bash -lc "rg -n 'TechDraw\|techdraw' web/public/modules/manifest.json tools/techdraw-business-cases.mjs" |
|
||
| 8 | source/read | 0.140 | 0.000 | 0 | /bin/bash -lc "rg -n 'review\|add_argument\|sources' tools/failure_reconciliation.py" |
|
||
| 9 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "rg -n 'DrawHatchTest' freecad-source/src/Mod/TechDraw" |
|
||
| 10 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' tools/techdraw-business-cases.mjs" |
|
||
| 11 | other | 7.121 | 0.476 | 0 | /bin/bash -lc "node --input-type=module -e 'import fs from \"node:fs\"; import crypto from \"node:crypto\"; const m=JSON.parse(fs.readFileSync(\"web/public/modules/manifest.json\",\"utf8\")); const mods=m.modules??m; const t=Array.isArray(mods)?mods.filter(x=>x.module===\"TechDraw\"\|\|x.name===\"TechDraw\"):mods.TechDraw; console.log(JSON.stringify(t,null,2)); for(const dir of [\"freecad-source/build-web/techdraw-native-configure/bin\",\"web/public/kernel\"]){const names=fs.readdirSync(dir).filter(n=>n.startsWith(\"FreeCADWebTechDrawRuntimeProbe\"));for(const name of names){const p=dir+\"/\"+name; console.log(p,crypto.createHash(\"sha256\").update(fs.readFileSync(p)).digest(\"hex\"));}}'" |
|
||
| 12 | other | 0.140 | 0.000 | 0 | /bin/bash -lc 'python3 tools/failure_reconciliation.py --help' |
|
||
| 13 | other | 24.218 | 0.585 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 607fba7cdc043a11367f --disposition superseded --reason '旧 sha256sum 检查 web/public/modules/TechDraw 错误路径。当前 manifest 的 TechDraw 所有 Worker 指向 /kernel/；本次实际计算 build-web/techdraw-native-configure/bin 与 web/public/kernel 的 JS、WASM、pthread Worker SHA256，三者分别为 ae15dc146a149c679fe83601cc6ba20f44be9c306b4b9c0f2d1bda3ce0753958、6b3448b066e8e5dba4531a3fa985d4302f72b187a2b1a502ce9114cab2c13b73、547f7c66230fd5acfd2243af7c110eb073c865d51cc895e5dc0f6e9caecae19b，与 manifest 一致。仅替代路径诊断，不声明业务通过。' --source web/public/modules/manifest.json --source docs/current/provided-source-index.md" |
|
||
| 14 | other | 0.157 | 0.596 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review 979b0accfeff81d31042 --disposition superseded --reason '本次成功读取 docs/business-acceptance/TechDraw.json 与 tools/techdraw-business-cases.mjs；合同已有 node command、实际构建 tree/target 和两个 coveredIds。脚本复用 wasm-probe-runtime.mjs 加载 TechDraw 构建并调用 native dispatcher，包含参数变化、重算、异常与文档隔离断言。原文件不存在的读取诊断已过期；业务是否通过仍由外层真实验收决定。' --source docs/business-acceptance/TechDraw.json --source tools/techdraw-business-cases.mjs" |
|
||
| 15 | other | 0.158 | 0.591 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review c5cd53c7c119197e872e --disposition superseded --reason '本次成功执行工具 --help，当前接口提供 --module 与 --keys，不提供 --list。历史失败源于诊断命令传入无效 --list 参数，按当前 --module TechDraw --keys 接口核对记录即可替代，不涉及 TechDraw 运行时失败。' --source tools/failure_reconciliation.py" |
|
||
| 16 | source/read | 0.157 | 0.596 | 0 | /bin/bash -lc "python3 tools/failure_reconciliation.py --review ecf4a464949efb7a7036 --disposition not_applicable --reason '原始错误明确为 fast_source_search 对 freecad-source 超过 5000 文件的范围保护拒绝，并非 DrawHatchTest 缺失或 TechDraw 业务执行失败。已读取资料索引，后续业务检索应限定 freecad-source/src/Mod/TechDraw 等相关目录。本回合新增定点搜索被读取预算拦截，未取得符号检索结果，不声称该测试存在、缺失或业务通过；仅将此搜索工具事件排除出业务故障。' --source docs/current/provided-source-index.md --source tools/failure_reconciliation.py" |
|
||
| 17 | other | 0.157 | 0.024 | 0 | /bin/bash -lc 'python3 tools/failure_reconciliation.py --module TechDraw --keys 607fba7cdc043a11367f 979b0accfeff81d31042 c5cd53c7c119197e872e ecf4a464949efb7a7036' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.153 | scheduler.cycle.started | thread.started |
|
||
| 0.184 | 6.527 | turn.started | agent_message |
|
||
| 6.711 | 1.789 | item.completed | command_execution |
|
||
| 8.501 | 0.139 | command:other | command_execution |
|
||
| 8.641 | 7.834 | command:source/read | command_execution |
|
||
| 16.477 | 0.139 | command:source/read | command_execution |
|
||
| 16.618 | 0.138 | command:source/read | command_execution |
|
||
| 16.757 | 0.138 | command:source/read | command_execution |
|
||
| 16.896 | 8.745 | command:source/read | command_execution |
|
||
| 25.643 | 0.140 | command:source/read | command_execution |
|
||
| 25.783 | 0.139 | command:source/read | command_execution |
|
||
| 25.923 | 0.139 | command:source/read | command_execution |
|
||
| 26.062 | 9.523 | command:source/read | agent_message |
|
||
| 35.586 | 7.121 | item.completed | command_execution |
|
||
| 43.184 | 0.140 | command:other | command_execution |
|
||
| 43.325 | 8.444 | command:other | agent_message |
|
||
| 51.768 | 24.218 | item.completed | command_execution |
|
||
| 76.571 | 0.157 | command:other | command_execution |
|
||
| 77.325 | 0.158 | command:other | command_execution |
|
||
| 78.075 | 0.157 | command:other | command_execution |
|
||
| 78.828 | 0.157 | command:source/read | command_execution |
|
||
| 79.009 | 13.715 | command:other | agent_message |
|
||
| 92.725 | 0.867 | item.completed | turn.completed |
|
||
| 93.592 | 1.501 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5040
|
||
|
||
Task: UNATTENDED-OPTIMIZATION; batch: {'id': '346a63afe9d0487228e4c4e3', 'module': 'TechDraw', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 14.594 s; between-event time: 249.538 s; file changes: 2.
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 0.868 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/periodic-optimization/optimization-000025-context.json" |
|
||
| 2 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/UNATTENDED_WORKFLOW.md" |
|
||
| 3 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
||
| 4 | source/read | 0.137 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/periodic-optimization/optimization-000025-work.json" |
|
||
| 5 | source/read | 10.360 | 0.001 | 0 | /bin/bash -lc 'python3 tools/fast_source_search.py --help' |
|
||
| 6 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' docs/business-acceptance/TechDraw.json " |
|
||
| 7 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' tools/techdraw-business-cases.mjs" |
|
||
| 8 | source/read | 12.115 | 0.002 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'image\|Image\|owner' --paths web/src/techdraw-facade.ts tools/techdraw-browser-cases.mjs freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp --context 3 --max-count 90" |
|
||
| 9 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'reuse\|build-dir\|public\|artifact\|add_argument' --paths tools/run_business_acceptance.py tools/inspect_web_module_artifacts.py --context 2 --max-count 65" |
|
||
| 10 | other | 0.795 | 0.001 | 0 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --help' |
|
||
| 11 | other | 0.157 | 0.146 | 0 | /bin/bash -lc 'python3 tools/inspect_web_module_artifacts.py --module TechDraw' |
|
||
| 12 | other | 13.292 | 7.032 | 0 | /bin/bash -lc 'env FREECAD_TECHDRAW_BUSINESS_BUILD=web/public/kernel python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:techdraw.createRecompute TechDraw:desktop:TechDraw_Image --reuse' |
|
||
| 13 | other | 0.157 | 7.401 | 0 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:techdraw.createRecompute TechDraw:desktop:TechDraw_Image --reuse' |
|
||
| 14 | other | 13.035 | 0.001 | 0 | /bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:techdraw.createRecompute TechDraw:desktop:TechDraw_Image --reuse' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
|
||
| 0.187 | 119.705 | turn.started | agent_message |
|
||
| 119.892 | 0.868 | item.completed | command_execution |
|
||
| 120.761 | 0.138 | command:source/read | command_execution |
|
||
| 120.900 | 0.138 | command:source/read | command_execution |
|
||
| 121.038 | 0.137 | command:source/read | command_execution |
|
||
| 121.176 | 10.360 | command:source/read | command_execution |
|
||
| 131.537 | 0.139 | command:source/read | command_execution |
|
||
| 131.676 | 0.139 | command:source/read | command_execution |
|
||
| 131.816 | 12.115 | command:source/read | command_execution |
|
||
| 143.933 | 0.138 | command:source/read | command_execution |
|
||
| 144.072 | 13.604 | command:source/read | agent_message |
|
||
| 157.676 | 0.795 | item.completed | command_execution |
|
||
| 158.472 | 0.157 | command:other | command_execution |
|
||
| 158.776 | 13.292 | command:other | command_execution |
|
||
| 179.101 | 10.729 | command:other | agent_message |
|
||
| 189.829 | 6.250 | item.completed | file_change |
|
||
| 196.081 | 0.157 | item.completed | command_execution |
|
||
| 203.642 | 13.035 | command:other | command_execution |
|
||
| 216.678 | 8.479 | command:other | agent_message |
|
||
| 225.156 | 25.604 | item.completed | file_change |
|
||
| 250.762 | 11.158 | item.completed | agent_message |
|
||
| 261.920 | 1.032 | item.completed | turn.completed |
|
||
| 262.952 | 1.180 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5041
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'c61b65093c2d44aae26dc4df', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 16}.
|
||
Observed command time (union): 0.018 s; between-event time: 96.072 s; file changes: 1.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.523 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.310 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/acceptance-contract-preflight | 0.000 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 1.674 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md" |
|
||
| 2 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
||
| 3 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "rg -n 'missingIds\|issue_coverage_required\|failureReconciliation\|moduleRecovery\|previousAttempt' docs/current docs/business-acceptance/Part.json tools/part-business-cases.mjs" |
|
||
| 4 | source/read | 8.687 | 0.001 | 0 | /bin/bash -lc 'ls docs/current' |
|
||
| 5 | source/read | 0.139 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/business-acceptance/Part.json" |
|
||
| 6 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/part-business-cases.mjs" |
|
||
| 7 | source/read | 8.220 | 0.006 | 0 | /bin/bash -lc "sed -n '1,230p' docs/current/module-implementation-packet.json" |
|
||
| 8 | source/read | 13.573 | 0.001 | 0 | /bin/bash -lc "rg --files tools -g '*part*cases*' -g '*part*desktop*'" |
|
||
| 9 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "sed -n '343,500p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp" |
|
||
| 10 | source/read | 0.138 | 0.000 | 0 | /bin/bash -lc "rg -n 'Box2\|Box3\|BoxSelection\|CrossSections\|CoordinateSystem\|CheckGeometry\|CompOffset\|CompJoin\|CompSplit\|Builder\|Chamfer\|Boolean' freecad-source/src/WebAssembly/FreeCADCoreProbe/PartDesktopCommands.cpp" |
|
||
| 11 | other | 2.352 | 0.001 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); for(const e of p.editableExcerpts\|\|[]) if(e.path.includes(\"PartDesktop\")\|\|e.path.includes(\"family-facade\")) console.log(JSON.stringify(e)); console.log(Object.keys(p))'" |
|
||
| 12 | other | 0.062 | 0.001 | 0 | /bin/bash -lc 'node --check tools/part-business-cases.mjs' |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.150 | scheduler.cycle.started | thread.started |
|
||
| 0.181 | 8.934 | turn.started | agent_message |
|
||
| 9.115 | 1.674 | item.completed | command_execution |
|
||
| 10.790 | 0.139 | command:source/read | command_execution |
|
||
| 10.930 | 0.138 | command:source/read | command_execution |
|
||
| 11.068 | 8.687 | command:source/read | command_execution |
|
||
| 19.757 | 0.139 | command:source/read | command_execution |
|
||
| 19.896 | 0.138 | command:source/read | command_execution |
|
||
| 20.035 | 8.220 | command:source/read | command_execution |
|
||
| 28.260 | 13.573 | command:source/read | command_execution |
|
||
| 41.835 | 0.138 | command:source/read | command_execution |
|
||
| 41.974 | 0.138 | command:source/read | command_execution |
|
||
| 42.113 | 15.051 | command:source/read | agent_message |
|
||
| 57.164 | 2.352 | item.completed | command_execution |
|
||
| 59.517 | 9.910 | command:other | agent_message |
|
||
| 69.427 | 14.504 | item.completed | file_change |
|
||
| 83.932 | 0.062 | item.completed | command_execution |
|
||
| 83.995 | 10.375 | command:other | agent_message |
|
||
| 94.370 | 0.931 | item.completed | turn.completed |
|
||
| 95.301 | 0.789 | turn.completed | scheduler.cycle.completed |
|
||
|
||
## Cycle 5042
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': '4eda40a94b18af525c195e8b', 'module': 'Part', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
|
||
Observed command time (union): 0.176 s; between-event time: 111.938 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.475 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.165 |
|
||
|
||
### postPipelineTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| post-pipeline/failure-reconciliation | 0.522 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
| 1 | source/read | 2.815 | 0.000 | 0 | /bin/bash -lc "rg -n \"FreeCADWebPartBoxProbe\|part.pythonFamily\|ENVIRONMENT\|configure/bin\" docs freecad-source web tools --glob '"'!**/node_modules/**'"'" |
|
||
| 2 | source/read | 18.380 | 0.001 | 0 | /bin/bash -lc 'python3 tools/fast_source_search.py "FreeCADWebPartBoxProbe" "part.pythonFamily" "ENVIRONMENT"' |
|
||
| 3 | source/read | 10.728 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md; python3 tools/failure_reconciliation.py --help" |
|
||
| 4 | source/read | 20.192 | 0.001 | 0 | /bin/bash -lc 'ls web/public/kernel/FreeCADWebPartBoxProbe*; rg -n "wasm-probe-runtime\|ENVIRONMENT" tools freecad-source/src/WebAssembly \| head' |
|
||
| 5 | source/read | 5.342 | 0.077 | 1 | /bin/bash -lc "rg -n \"wasm-probe-runtime\" . --glob '*.mjs' --glob '*.js' \| head; python3 tools/failure_reconciliation.py --review 34ab3de54cc19a928cb1 5536db4ee9041779201d a3da0805549d006e7158 --disposition superseded --reason '当前构建系统实际使用 freecad-source/build-web/configure；configure/bin 为历史错误请求路径，且旧 link rule 已不存在。' --source docs/current/provided-source-index.md" |
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.162 | scheduler.cycle.started | thread.started |
|
||
| 0.194 | 10.922 | turn.started | agent_message |
|
||
| 11.116 | 2.815 | item.completed | command_execution |
|
||
| 13.933 | 18.380 | command:source/read | command_execution |
|
||
| 32.314 | 10.728 | command:source/read | command_execution |
|
||
| 43.043 | 20.192 | command:source/read | command_execution |
|
||
| 63.237 | 20.890 | command:source/read | agent_message |
|
||
| 84.127 | 5.342 | item.completed | command_execution |
|
||
| 89.547 | 22.474 | command:source/read | command_execution |
|
||
|
||
## Cycle 5043
|
||
|
||
Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
|
||
Observed command time (union): 0.000 s; between-event time: 131.062 s; file changes: 0.
|
||
|
||
### preparationTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| continue | 0.541 |
|
||
| batchPreflight | 0.043 |
|
||
| implementationPacket | 0.333 |
|
||
|
||
### waitingTiming
|
||
|
||
| Step | Seconds |
|
||
|---|---:|
|
||
| scheduler/provider-backoff | 19.989 |
|
||
|
||
### Commands
|
||
|
||
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
||
|---:|---|---:|---:|---:|---|
|
||
|
||
### Between-Event Intervals
|
||
|
||
| Offset (s) | Seconds | After | Before |
|
||
|---:|---:|---|---|
|
||
| 0.000 | 0.158 | scheduler.cycle.started | thread.started |
|
||
| 0.206 | 130.856 | turn.started | scheduler.cycle.completed |
|