1038 lines
56 KiB
Markdown
1038 lines
56 KiB
Markdown
# Unattended Execution Timing
|
|
|
|
Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.
|
|
|
|
Cycles: 20; aggregate measured time: 2028.648 s.
|
|
|
|
| Phase | Total (s) | Share | Count | Average (s) | Maximum (s) |
|
|
|---|---:|---:|---:|---:|---:|
|
|
| agent/post-read | 552.570 | 27.24% | 120 | 4.605 | 62.229 |
|
|
| agent/editing | 537.905 | 26.52% | 18 | 29.884 | 79.883 |
|
|
| post-pipeline/build | 241.125 | 11.89% | 12 | 20.094 | 45.696 |
|
|
| agent/initial-decision | 118.444 | 5.84% | 16 | 7.403 | 16.737 |
|
|
| agent/decision | 102.478 | 5.05% | 29 | 3.534 | 15.612 |
|
|
| pre-agent-pipeline/build | 95.912 | 4.73% | 4 | 23.978 | 33.841 |
|
|
| agent/synthesis | 74.028 | 3.65% | 20 | 3.701 | 15.934 |
|
|
| post-pipeline/cmake-regenerate | 65.837 | 3.25% | 3 | 21.946 | 27.621 |
|
|
| agent/finalization | 53.522 | 2.64% | 16 | 3.345 | 20.325 |
|
|
| preparation/continue | 34.525 | 1.70% | 19 | 1.817 | 3.792 |
|
|
| agent/post-edit | 30.341 | 1.50% | 12 | 2.528 | 12.138 |
|
|
| post-pipeline/business-acceptance | 24.215 | 1.19% | 12 | 2.018 | 8.256 |
|
|
| agent/failure-recovery | 20.895 | 1.03% | 4 | 5.224 | 7.873 |
|
|
| pre-agent-pipeline/business-acceptance | 19.605 | 0.97% | 4 | 4.901 | 14.328 |
|
|
| post-pipeline/artifact-sync | 16.936 | 0.83% | 12 | 1.411 | 4.210 |
|
|
| pre-agent-pipeline/cmake-regenerate | 10.662 | 0.53% | 1 | 10.662 | 10.662 |
|
|
| pre-agent-pipeline/artifact-sync | 8.653 | 0.43% | 3 | 2.884 | 7.458 |
|
|
| preparation/implementationPacket | 7.451 | 0.37% | 19 | 0.392 | 0.457 |
|
|
| pre-agent-pipeline/business-audit | 2.692 | 0.13% | 4 | 0.673 | 0.711 |
|
|
| scheduler/process-start | 2.641 | 0.13% | 16 | 0.165 | 0.367 |
|
|
| post-pipeline/business-audit | 2.573 | 0.13% | 4 | 0.643 | 0.686 |
|
|
| other | 2.010 | 0.10% | 16 | 0.126 | 1.170 |
|
|
| source/read | 2.009 | 0.10% | 127 | 0.016 | 1.936 |
|
|
| preparation/batchPreflight | 0.825 | 0.04% | 19 | 0.043 | 0.046 |
|
|
| post-pipeline/preflight | 0.645 | 0.03% | 13 | 0.050 | 0.069 |
|
|
| pre-agent-pipeline/preflight | 0.149 | 0.01% | 3 | 0.050 | 0.064 |
|
|
| post-pipeline/acceptance-contract-preflight | 0.000 | 0.00% | 2 | 0.000 | 0.000 |
|
|
|
|
## Wall-Clock Coverage
|
|
|
|
First cycle start to last observed event: 2185.014 s.
|
|
Inside observed cycles: 1498.497 s; between cycles: 686.517 s.
|
|
|
|
| Previous Cycle | Next Cycle | Gap (s) |
|
|
|---:|---:|---:|
|
|
| 5384 | 5385 | 77.374 |
|
|
| 5385 | 5386 | 43.379 |
|
|
| 5386 | 5387 | 35.867 |
|
|
| 5387 | 5388 | 39.223 |
|
|
| 5388 | 5389 | 8.058 |
|
|
| 5389 | 5390 | 41.723 |
|
|
| 5390 | 5391 | 11.796 |
|
|
| 5391 | 5393 | 41.649 |
|
|
| 5393 | 5394 | 65.706 |
|
|
| 5394 | 5396 | 112.933 |
|
|
| 5396 | 5398 | 61.389 |
|
|
| 5398 | 5399 | 5.914 |
|
|
| 5399 | 5400 | 30.834 |
|
|
| 5400 | 5401 | 46.022 |
|
|
| 5401 | 5403 | 64.650 |
|
|
|
|
## Cycle 5384
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.298 s; between-event time: 139.828 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.792 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.376 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.065 |
|
|
| post-pipeline/build | 33.267 |
|
|
| post-pipeline/artifact-sync | 1.839 |
|
|
| post-pipeline/business-acceptance | 1.236 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | other | 0.068 | 0.001 | 0 | /bin/bash -lc 'node --check tools/meshpart-business-cases.mjs' |
|
|
| 2 | other | 0.158 | 0.292 | 0 | /bin/bash -lc 'web/node_modules/.bin/tsc --target ES2022 --module ESNext --moduleResolution Bundler --strict --skipLibCheck --noEmit web/src/meshpart-facade.ts' |
|
|
| 3 | source/read | 3.514 | 0.001 | 64 | /bin/bash -lc 'git diff --check' |
|
|
| 4 | other | 0.058 | 0.001 | 0 | /bin/bash -lc "node -e 'const fs=require(\"node:fs\"); const c=JSON.parse(fs.readFileSync(\"docs/business-acceptance/MeshPart.json\",\"utf8\")); if(c.coveredIds.length"'!==1 \|\| !fs.existsSync(c.command[1])) process.exit(1); console.log("MeshPart contract JSON and script path valid");'"'" |
|
|
| 5 | source/read | 15.612 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- docs/business-acceptance/MeshPart.json tools/meshpart-business-cases.mjs web/src/meshpart-facade.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.157 | scheduler.cycle.started | thread.started |
|
|
| 0.172 | 16.737 | turn.started | agent_message |
|
|
| 16.909 | 79.883 | item.completed | file_change |
|
|
| 96.796 | 0.068 | item.completed | command_execution |
|
|
| 96.866 | 0.158 | command:other | command_execution |
|
|
| 97.316 | 14.006 | command:other | agent_message |
|
|
| 111.322 | 3.514 | item.completed | command_execution |
|
|
| 114.838 | 0.058 | command:source/read | command_execution |
|
|
| 114.897 | 15.612 | command:other | command_execution |
|
|
| 130.510 | 8.259 | command:source/read | agent_message |
|
|
| 138.769 | 0.622 | item.completed | turn.completed |
|
|
| 139.392 | 0.735 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5385
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '2a13bf74874253ae0d192210', 'module': 'Fem', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
|
|
Observed command time (union): 0.011 s; between-event time: 64.098 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.533 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.321 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.043 |
|
|
| post-pipeline/build | 31.092 |
|
|
| post-pipeline/artifact-sync | 1.290 |
|
|
| post-pipeline/business-acceptance | 0.701 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 2.131 | 0.000 | 0 | /bin/bash -lc 'rg -n "feminout\|Fem BREP\|fem.brep\|Z88" freecad-source/src/WebAssembly/FreeCADCoreProbe freecad-source/src/Mod/Fem \| head -80' |
|
|
| 2 | source/read | 6.825 | 0.003 | 0 | /bin/bash -lc "sed -n '1,240p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp; sed -n '1,220p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemDesktopCommands.cpp" |
|
|
| 3 | source/read | 6.055 | 0.001 | 0 | /bin/bash -lc 'rg -n "feminout\|importZ88\|Z88\|txt" freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp' |
|
|
| 4 | source/read | 2.908 | 0.001 | 0 | /bin/bash -lc "sed -n '1680,1810p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp; rg -n \"Fem.*feminout\|feminout\|FemGenericFamilyProbe\" freecad-source/src/WebAssembly/CMakeLists.txt freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 5 | source/read | 12.138 | 0.001 | 64 | /bin/bash -lc 'git diff --check && git diff -- freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp' |
|
|
| 6 | source/read | 6.295 | 0.001 | 0 | /bin/bash -lc "sed -n '1698,1710p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.152 | scheduler.cycle.started | thread.started |
|
|
| 0.183 | 5.954 | turn.started | agent_message |
|
|
| 6.137 | 2.131 | item.completed | command_execution |
|
|
| 8.269 | 6.825 | command:source/read | command_execution |
|
|
| 15.098 | 6.055 | command:source/read | command_execution |
|
|
| 21.154 | 4.659 | command:source/read | agent_message |
|
|
| 25.813 | 2.908 | item.completed | command_execution |
|
|
| 28.724 | 6.798 | command:source/read | agent_message |
|
|
| 35.521 | 3.220 | item.completed | file_change |
|
|
| 38.746 | 12.138 | item.completed | command_execution |
|
|
| 50.885 | 6.295 | command:source/read | command_execution |
|
|
| 57.182 | 5.904 | command:source/read | agent_message |
|
|
| 63.086 | 0.422 | item.completed | turn.completed |
|
|
| 63.508 | 0.601 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5386
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '235b8608095d21baa8dab65a', 'module': 'Fem', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
|
|
Observed command time (union): 0.017 s; between-event time: 100.091 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.565 |
|
|
| batchPreflight | 0.043 |
|
|
| implementationPacket | 0.341 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.044 |
|
|
| post-pipeline/build | 22.592 |
|
|
| post-pipeline/artifact-sync | 1.557 |
|
|
| post-pipeline/business-acceptance | 2.425 |
|
|
| post-pipeline/business-audit | 0.608 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 4.045 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
|
|
| 2 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1,140p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
|
|
| 3 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "rg -n 'z88\|numpy\|femmesh\|feminout' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp" |
|
|
| 4 | source/read | 0.154 | 0.001 | 0 | /bin/bash -lc "sed -n '1,100p' docs/business-acceptance/Fem.json" |
|
|
| 5 | source/read | 10.190 | 0.002 | 0 | /bin/bash -lc "sed -n '1,110p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 6 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1680,1820p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp" |
|
|
| 7 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' freecad-source/src/Mod/Fem/femmesh/meshtools.py" |
|
|
| 8 | source/read | 0.155 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' freecad-source/src/Mod/Fem/feminout/importZ88Mesh.py" |
|
|
| 9 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,95p' freecad-source/src/Mod/Fem/feminout/importToolsFem.py" |
|
|
| 10 | source/read | 10.621 | 0.001 | 0 | /bin/bash -lc "rg -n 'np\\.\|geomtools\\.\|"'^def '"' freecad-source/src/Mod/Fem/femmesh/meshtools.py" |
|
|
| 11 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc 'git diff -- freecad-source/src/Mod/Fem/femmesh/meshtools.py docs/business-acceptance/Fem.json' |
|
|
| 12 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "rg -n 'meshtools.py\|importZ88Mesh\|femtools/geomtools' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 13 | other | 11.559 | 0.001 | 0 | /bin/bash -lc "python3 - <<'PY' import ast from pathlib import Path path = Path('freecad-source/src/Mod/Fem/femmesh/meshtools.py') source = path.read_text() tree = ast.parse(source) lines = source.splitlines() patch = ['*** Begin Patch', '*** Update File: ' + str(path), '@@', '-import numpy as np', '-', ' import FreeCAD', '-', '-from femtools import geomtools'] for function in tree.body: if not isinstance(function, (ast.FunctionDef, ast.AsyncFunctionDef)): continue names = {node.id for node in ast.walk(function) if isinstance(node, ast.Name) and isinstance(node.ctx, ast.Load)} imports = [] if 'np' in names: imports.append(' import numpy as np') if 'geomtools' in names: imports.append(' from femtools import geomtools') if not imports: continue statement = function.body[0] if isinstance(statement, ast.Expr) and isinstance(statement.value, ast.Constant) and isinstance(statement.value.value, str): index = statement.end_lineno else: index = statement.lineno - 1 patch += ['@@'] + [' ' + line for line in lines[max(function.lineno - 1, index - 3):index]] + ['+' + line for line in imports] + ['+'] + [' ' + line for line in lines[index:index + 2]] patch += ['*** End Patch'] print('\\n'.join(patch)) PY" |
|
|
| 14 | source/read | 0.036 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/Mod/Fem/femmesh/meshtools.py docs/business-acceptance/Fem.json' |
|
|
| 15 | other | 0.155 | 0.001 | 0 | /bin/bash -lc "python3 - <<'PY' import ast import json from pathlib import Path path = Path('freecad-source/src/Mod/Fem/femmesh/meshtools.py') tree = ast.parse(path.read_text(), filename=str(path)) for node in tree.body: if isinstance(node, (ast.FunctionDef, ast.AsyncFunctionDef)): names = {item.id for item in ast.walk(node) if isinstance(item, ast.Name) and isinstance(item.ctx, ast.Load)} imports = {alias.asname or alias.name for item in ast.walk(node) if isinstance(item, (ast.Import, ast.ImportFrom)) for alias in item.names} assert names.intersection({'np', 'geomtools'}) <= imports, node.name elif isinstance(node, ast.Import): assert all(alias.name "'!= '"'numpy' for alias in node.names) elif isinstance(node, ast.ImportFrom): assert node.module "'!= '"'femtools' json.loads(Path('docs/business-acceptance/Fem.json').read_text()) print('Python syntax, deferred dependency scope, and contract JSON checks passed.') PY" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.154 | scheduler.cycle.started | thread.started |
|
|
| 0.190 | 5.484 | turn.started | agent_message |
|
|
| 5.674 | 4.045 | item.completed | command_execution |
|
|
| 9.720 | 0.153 | command:source/read | command_execution |
|
|
| 9.874 | 0.153 | command:source/read | command_execution |
|
|
| 10.028 | 0.154 | command:source/read | command_execution |
|
|
| 10.184 | 10.190 | command:source/read | command_execution |
|
|
| 20.376 | 0.153 | command:source/read | command_execution |
|
|
| 20.529 | 0.153 | command:source/read | command_execution |
|
|
| 20.683 | 0.155 | command:source/read | command_execution |
|
|
| 20.840 | 0.154 | command:source/read | command_execution |
|
|
| 20.995 | 10.621 | command:source/read | command_execution |
|
|
| 31.617 | 0.153 | command:source/read | command_execution |
|
|
| 31.771 | 0.154 | command:source/read | command_execution |
|
|
| 31.926 | 17.674 | command:source/read | agent_message |
|
|
| 49.600 | 11.559 | item.completed | command_execution |
|
|
| 61.161 | 30.532 | command:other | file_change |
|
|
| 91.733 | 0.155 | command:source/read | command_execution |
|
|
| 91.889 | 6.454 | command:other | agent_message |
|
|
| 98.344 | 0.520 | item.completed | turn.completed |
|
|
| 98.864 | 1.244 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5387
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.006 s; between-event time: 47.057 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.667 |
|
|
| batchPreflight | 0.043 |
|
|
| implementationPacket | 0.385 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.040 |
|
|
| post-pipeline/build | 30.265 |
|
|
| post-pipeline/artifact-sync | 1.166 |
|
|
| post-pipeline/business-acceptance | 1.320 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.947 | 0.000 | 0 | /bin/bash -lc "sed -n '400,465p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 2 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
|
|
| 3 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/OCCT_GEOMETRY_BOUNDARY.md" |
|
|
| 4 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 5 | source/read | 0.035 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp docs/current/measure-8db7edb6c2b2f3ca91ee99d5-boundaries.md' |
|
|
| 6 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '433,452p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.149 | scheduler.cycle.started | thread.started |
|
|
| 0.174 | 5.921 | turn.started | agent_message |
|
|
| 6.095 | 3.947 | item.completed | command_execution |
|
|
| 10.043 | 0.154 | command:source/read | command_execution |
|
|
| 10.198 | 0.153 | command:source/read | command_execution |
|
|
| 10.351 | 0.157 | command:source/read | command_execution |
|
|
| 10.510 | 6.538 | command:source/read | agent_message |
|
|
| 17.048 | 16.798 | item.completed | file_change |
|
|
| 33.885 | 0.153 | command:source/read | command_execution |
|
|
| 34.039 | 11.991 | command:source/read | agent_message |
|
|
| 46.030 | 0.352 | item.completed | turn.completed |
|
|
| 46.383 | 0.680 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5388
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.008 s; between-event time: 89.051 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.559 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.381 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.041 |
|
|
| post-pipeline/build | 0.192 |
|
|
| post-pipeline/artifact-sync | 0.052 |
|
|
| post-pipeline/business-acceptance | 1.313 |
|
|
| post-pipeline/business-audit | 0.632 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 2.701 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' tools/measure-business-cases.mjs" |
|
|
| 2 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "rg -n 'createRecompute\|position1\|position2\|distance\|recompute\|resourcesReleased' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 3 | source/read | 7.198 | 0.001 | 0 | /bin/bash -lc "sed -n '275,320p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 4 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' web/src/facade-envelope.ts" |
|
|
| 5 | other | 0.062 | 0.001 | 0 | /bin/bash -lc 'node --check tools/measure-business-cases.mjs' |
|
|
| 6 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc 'git diff --check -- tools/measure-business-cases.mjs' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.145 | scheduler.cycle.started | thread.started |
|
|
| 0.160 | 8.237 | turn.started | agent_message |
|
|
| 8.398 | 2.701 | item.completed | command_execution |
|
|
| 11.100 | 0.152 | command:source/read | command_execution |
|
|
| 11.253 | 7.198 | command:source/read | command_execution |
|
|
| 18.453 | 0.153 | command:source/read | command_execution |
|
|
| 18.607 | 10.459 | command:source/read | agent_message |
|
|
| 29.066 | 3.604 | item.completed | scheduler.stderr |
|
|
| 32.671 | 37.770 | scheduler.stderr | file_change |
|
|
| 70.442 | 0.062 | item.completed | command_execution |
|
|
| 70.505 | 0.153 | command:other | command_execution |
|
|
| 70.659 | 16.468 | command:source/read | agent_message |
|
|
| 87.127 | 0.419 | item.completed | turn.completed |
|
|
| 87.546 | 1.513 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5389
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.583 s; between-event time: 99.536 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.681 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.389 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.040 |
|
|
| post-pipeline/build | 34.294 |
|
|
| post-pipeline/artifact-sync | 3.028 |
|
|
| post-pipeline/business-acceptance | 1.420 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 4.043 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.153 | 0.001 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 3 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '1,240p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp" |
|
|
| 4 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "sed -n '1,170p' tools/meshpart-business-cases.mjs" |
|
|
| 5 | source/read | 10.165 | 0.001 | 0 | /bin/bash -lc "sed -n '240,315p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp" |
|
|
| 6 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "rg -n 'facade success\|MeshPartBusinessInput' docs/current/business-evidence -g '*.json'" |
|
|
| 7 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,145p' tools/wasm-probe-runtime.mjs" |
|
|
| 8 | other | 10.131 | 0.540 | 0 | /bin/bash -lc "node --input-type=module -e 'import {loadWasmProbe} from \"./tools/wasm-probe-runtime.mjs\"; const {kernel}=await loadWasmProbe(\"freecad-source/build-web/configure/bin\",\"FreeCADWebMeshPartRuntimeProbe\",{printErr:console.error}); try { console.log(kernel.ccall(\"fc_web_dispatch_json\",\"string\",[\"string\"],[JSON.stringify({cmd:\"meshpart.createRecompute\",args:{schema:\"freecad-web-meshpart/create-recompute/v1\",module:\"MeshPart\",action:\"create/recompute\",shape:\"Part::Box\",method:\"Standard\",size:[2,3,4],documentName:\"MeshPartBusinessInput\",keepDocument:true}})])); } finally {kernel.PThread?.terminateAllThreads?.();process.exit(0);}'" |
|
|
| 9 | other | 0.060 | 0.001 | 0 | /bin/bash -lc 'node --check tools/meshpart-business-cases.mjs' |
|
|
| 10 | source/read | 0.153 | 0.000 | 64 | /bin/bash -lc 'git diff --check' |
|
|
| 11 | source/read | 6.669 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp tools/meshpart-business-cases.mjs' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.163 | scheduler.cycle.started | thread.started |
|
|
| 0.190 | 7.536 | turn.started | agent_message |
|
|
| 7.726 | 4.043 | item.completed | command_execution |
|
|
| 11.770 | 0.153 | command:source/read | command_execution |
|
|
| 11.925 | 0.156 | command:source/read | command_execution |
|
|
| 12.081 | 0.153 | command:source/read | command_execution |
|
|
| 12.236 | 10.165 | command:source/read | command_execution |
|
|
| 22.402 | 0.154 | command:source/read | command_execution |
|
|
| 22.558 | 0.154 | command:source/read | command_execution |
|
|
| 22.737 | 10.131 | command:source/read | command_execution |
|
|
| 33.410 | 12.407 | command:other | agent_message |
|
|
| 45.817 | 37.790 | item.completed | file_change |
|
|
| 83.611 | 0.060 | item.completed | command_execution |
|
|
| 83.672 | 0.153 | command:other | command_execution |
|
|
| 83.832 | 6.669 | command:source/read | command_execution |
|
|
| 90.503 | 7.539 | command:source/read | agent_message |
|
|
| 98.042 | 0.520 | item.completed | turn.completed |
|
|
| 98.562 | 1.558 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5390
|
|
|
|
Task: UNATTENDED-OPTIMIZATION; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 3.126 s; between-event time: 146.993 s; file changes: 2.
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 2.265 | 0.003 | 0 | /bin/bash -lc "sed -n '1,220p' docs/UNATTENDED_WORKFLOW.md && sed -n '1,180p' docs/current/provided-source-index.md && cat docs/current/periodic-optimization/optimization-000050-context.json" |
|
|
| 2 | source/read | 8.052 | 0.005 | 0 | /bin/bash -lc "cat docs/WEB_BUSINESS_MIGRATION_RULES.md docs/OCCT_GEOMETRY_BOUNDARY.md; sed -n '1,360p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp; python3 tools/fast_source_search.py --help; python3 tools/run_business_acceptance.py --help" |
|
|
| 3 | source/read | 9.915 | 0.003 | 0 | /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'MeshPart\|sync\|artifact\|build-dir\|BUILD' --paths tools/run_business_acceptance.py tools/wasm-probe-runtime.mjs tools/meshpart-business-cases.mjs --context 2 --max-count 65; python3 -c 'import json,pathlib; p=pathlib.Path(\"docs/current/business-acceptance.json\"); d=json.loads(p.read_text()); print(json.dumps(d,ensure_ascii=False)[-18000:])'" |
|
|
| 4 | other | 5.577 | 1.170 | 1 | /bin/bash -lc 'node tools/meshpart-business-cases.mjs' |
|
|
| 5 | source/read | 7.873 | 0.002 | 0 | /bin/bash -lc "sed -n '1,155p' tools/meshpart-business-cases.mjs; sed -n '1,150p' tools/wasm-probe-runtime.mjs; python3 tools/fast_source_search.py 'meshFromShape\|LinearDeflection\|AngularDeflection' --path freecad-source/src/Mod/MeshPart/App/AppMeshPartPy.cpp --context 6 --max-count 18; rg --files tools -g '*sync*' -g '*pipeline*'" |
|
|
| 6 | source/read | 5.408 | 0.003 | 0 | /bin/bash -lc "sed -n '1,220p' web/src/facade-envelope.ts; sed -n '90,220p' freecad-source/src/Mod/MeshPart/App/AppMeshPartPy.cpp; sed -n '1,160p' tools/run_business_acceptance.py; python3 tools/fast_source_search.py 'sync.*py\|artifact-sync\|FREECAD.*BUILD\|FREECAD.*DIR' --path tools/run_incremental_module_pipeline.py --context 2 --max-count 20; python3 -c 'import json; d=json.load(open(\"web/public/modules/manifest.json\")); print(json.dumps(d[\"modules\"][\"MeshPart\"],indent=2))'" |
|
|
| 7 | source/read | 0.157 | 1.936 | 0 | /bin/bash -lc 'python3 tools/inspect_web_module_artifacts.py --module MeshPart; sha256sum freecad-source/build-web/configure/bin/FreeCADWebMeshPartRuntimeProbe.{js,wasm,worker.js} web/public/kernel/FreeCADWebMeshPartRuntimeProbe.{js,wasm,worker.js}; python3 tools/run_business_acceptance.py --module MeshPart --ids MeshPart:meshpart.createRecompute --reuse' |
|
|
| 8 | source/read | 21.912 | 0.001 | 0 | /bin/bash -lc "python3 -c 'import json; d=json.load(open(\"docs/current/business-evidence/db0135e9c16a1c071760b775-20260909T002101204948.json\")); print(\"evidence keys:\",list(d)); print(\"stderr:\",d.get(\"stderr\")); print(\"cases:\",[(r[\"capabilityId\"],r[\"status\"],len(r[\"cases\"]),sum(len(c[\"assertions\"]) for c in r[\"cases\"])) for r in d[\"results\"]]); print(\"areas:\",[c.get(\"actual\",{}).get(\"result\",{}).get(\"area\") for r in d[\"results\"] for c in r[\"cases\"]])'; python3 tools/run_business_acceptance.py --module MeshPart --ids MeshPart:meshpart.createRecompute --reuse; git diff --check -- tools/meshpart-business-cases.mjs" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.159 | scheduler.cycle.started | thread.started |
|
|
| 0.192 | 7.656 | turn.started | agent_message |
|
|
| 7.847 | 2.265 | item.completed | command_execution |
|
|
| 10.116 | 8.052 | command:source/read | command_execution |
|
|
| 18.173 | 9.915 | command:source/read | command_execution |
|
|
| 28.091 | 5.577 | command:source/read | command_execution |
|
|
| 34.838 | 7.873 | command:other | command_execution |
|
|
| 42.713 | 7.692 | command:source/read | agent_message |
|
|
| 50.405 | 5.408 | item.completed | command_execution |
|
|
| 55.816 | 17.735 | command:source/read | file_change |
|
|
| 73.552 | 0.157 | item.completed | command_execution |
|
|
| 75.646 | 21.912 | command:source/read | command_execution |
|
|
| 97.560 | 10.392 | command:source/read | agent_message |
|
|
| 107.953 | 30.725 | item.completed | file_change |
|
|
| 138.679 | 9.928 | item.completed | agent_message |
|
|
| 148.607 | 0.419 | item.completed | turn.completed |
|
|
| 149.026 | 1.093 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5391
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'fc1022803c4e331856d7aa8a', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.008 s; between-event time: 115.067 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.494 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.396 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/acceptance-contract-preflight | 0.000 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 4.863 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' tools/measure-business-cases.mjs" |
|
|
| 3 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' web/src/measure-persistence-facade.ts" |
|
|
| 4 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "rg -n 'saveReopen\|save.reopen\|persistence\|position1\|document' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 5 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 6 | source/read | 11.344 | 0.001 | 0 | /bin/bash -lc "sed -n '265,325p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 7 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "sed -n '500p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 8 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "rg -n 'measure.saveReopen\|dispatchMeasurePersistence\|MEASURE_PERSISTENCE_FIXTURE' web/src tools/*measure* docs/business-acceptance/Measure.json" |
|
|
| 9 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "rg -n 'saveAs\\(\|openDocument\\(' freecad-source/src/App/Document.h freecad-source/src/App/Application.h" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.150 | scheduler.cycle.started | thread.started |
|
|
| 0.181 | 5.456 | turn.started | agent_message |
|
|
| 5.637 | 4.863 | item.completed | command_execution |
|
|
| 10.501 | 0.152 | command:source/read | command_execution |
|
|
| 10.654 | 0.156 | command:source/read | command_execution |
|
|
| 10.811 | 0.153 | command:source/read | command_execution |
|
|
| 10.964 | 0.152 | command:source/read | command_execution |
|
|
| 11.117 | 11.344 | command:source/read | command_execution |
|
|
| 22.462 | 0.152 | command:source/read | command_execution |
|
|
| 22.615 | 0.152 | command:source/read | command_execution |
|
|
| 22.768 | 0.152 | command:source/read | command_execution |
|
|
| 22.920 | 14.663 | command:source/read | agent_message |
|
|
| 37.583 | 57.145 | item.completed | file_change |
|
|
| 94.733 | 20.342 | scheduler.stderr | scheduler.cycle.completed |
|
|
|
|
## Cycle 5392
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.560 |
|
|
| batchPreflight | 0.043 |
|
|
| implementationPacket | 0.401 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
|
|
## Cycle 5393
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'fc1022803c4e331856d7aa8a', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.008 s; between-event time: 88.061 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.975 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.397 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.040 |
|
|
| post-pipeline/build | 0.156 |
|
|
| post-pipeline/artifact-sync | 0.053 |
|
|
| post-pipeline/business-acceptance | 1.408 |
|
|
| post-pipeline/business-audit | 0.647 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.941 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.153 | 0.001 | 0 | /bin/bash -lc 'cat tools/measure-business-cases.mjs web/src/measure-persistence-facade.ts docs/business-acceptance/Measure.json docs/WEB_BUSINESS_MIGRATION_RULES.md' |
|
|
| 3 | source/read | 0.152 | 0.000 | 0 | /bin/bash -lc "rg -n 'saveReopen\|Persistence\|persistence\|save.reopen' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp tools/*measure* web/src/measure*" |
|
|
| 4 | source/read | 6.228 | 0.002 | 0 | /bin/bash -lc "sed -n '240,375p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp" |
|
|
| 5 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc 'cat tools/wasm-probe-runtime.mjs web/src/measure-facade.ts' |
|
|
| 6 | other | 0.061 | 0.001 | 0 | /bin/bash -lc 'node --check tools/measure-business-cases.mjs' |
|
|
| 7 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc 'git diff --check -- tools/measure-business-cases.mjs docs/business-acceptance/Measure.json' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.139 | scheduler.cycle.started | thread.started |
|
|
| 0.165 | 5.725 | turn.started | agent_message |
|
|
| 5.890 | 3.941 | item.completed | command_execution |
|
|
| 9.832 | 0.153 | command:source/read | command_execution |
|
|
| 9.986 | 0.152 | command:source/read | command_execution |
|
|
| 10.139 | 6.228 | command:source/read | command_execution |
|
|
| 16.369 | 0.153 | command:source/read | command_execution |
|
|
| 16.523 | 10.462 | command:source/read | agent_message |
|
|
| 26.985 | 52.535 | item.completed | file_change |
|
|
| 79.521 | 0.061 | item.completed | command_execution |
|
|
| 79.583 | 0.153 | command:other | command_execution |
|
|
| 79.737 | 7.048 | command:source/read | agent_message |
|
|
| 86.785 | 0.381 | item.completed | turn.completed |
|
|
| 87.166 | 0.902 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5394
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '50435b8c109aa0db05152515', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
|
|
Observed command time (union): 0.026 s; between-event time: 109.129 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.695 |
|
|
| batchPreflight | 0.042 |
|
|
| implementationPacket | 0.366 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.044 |
|
|
| post-pipeline/build | 45.696 |
|
|
| post-pipeline/artifact-sync | 4.210 |
|
|
| post-pipeline/business-acceptance | 2.193 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.559 | 0.002 | 0 | /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json" |
|
|
| 2 | source/read | 0.157 | 0.000 | 64 | /bin/bash -lc 'git status --short' |
|
|
| 3 | source/read | 0.014 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md" |
|
|
| 4 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '110,215p' tools/techdraw-business-cases.mjs" |
|
|
| 5 | source/read | 7.620 | 0.001 | 0 | /bin/bash -lc "sed -n '1480,1740p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp" |
|
|
| 6 | source/read | 0.162 | 0.000 | 0 | /bin/bash -lc 'cat web/src/techdraw-native-facade.ts' |
|
|
| 7 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc "sed -n '350,440p' web/src/workbench-shell.tsx" |
|
|
| 8 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc 'cat docs/OCCT_GEOMETRY_BOUNDARY.md' |
|
|
| 9 | source/read | 7.194 | 0.001 | 0 | /bin/bash -lc "rg -n 'exportDrawing\|viewPartAs\|DXF\|dxf' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp" |
|
|
| 10 | other | 0.163 | 0.000 | 0 | /bin/bash -lc "node -e 'const p=require(\"./docs/current/module-implementation-packet.json\"); console.log(JSON.stringify({sourceRecords:p.sourceRecords,excerpts:p.editableExcerpts.filter(x=>x.path.includes(\"Runtime\"))},null,2))' " |
|
|
| 11 | source/read | 5.547 | 0.004 | 0 | /bin/bash -lc "sed -n '250,492p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp" |
|
|
| 12 | source/read | 8.366 | 0.002 | 0 | /bin/bash -lc "sed -n '1,240p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp" |
|
|
| 13 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc 'git diff --stat -- freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/workbench-shell.tsx web/src/techdraw-native-facade.ts' |
|
|
| 14 | source/read | 3.106 | 0.001 | 0 | /bin/bash -lc "sed -n '380,560p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp" |
|
|
| 15 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '1,190p' freecad-source/src/Mod/TechDraw/App/TechDrawExport.cpp" |
|
|
| 16 | source/read | 10.966 | 0.001 | 0 | /bin/bash -lc "sed -n '560,710p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp" |
|
|
| 17 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '240,275p' web/src/desktop-command-dispatcher.ts" |
|
|
| 18 | source/read | 0.039 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/workbench-shell.tsx tools/techdraw-business-cases.mjs docs/current/techdraw-export-boundary.md' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.167 | scheduler.cycle.started | thread.started |
|
|
| 0.197 | 5.522 | turn.started | agent_message |
|
|
| 5.720 | 3.559 | item.completed | command_execution |
|
|
| 9.282 | 0.157 | command:source/read | command_execution |
|
|
| 9.454 | 0.156 | command:source/read | command_execution |
|
|
| 9.610 | 7.620 | command:source/read | command_execution |
|
|
| 17.233 | 0.162 | command:source/read | command_execution |
|
|
| 17.395 | 0.157 | command:source/read | command_execution |
|
|
| 17.553 | 0.157 | command:source/read | command_execution |
|
|
| 17.711 | 7.194 | command:source/read | command_execution |
|
|
| 24.906 | 0.163 | command:source/read | command_execution |
|
|
| 25.069 | 5.547 | command:other | command_execution |
|
|
| 30.621 | 8.366 | command:source/read | command_execution |
|
|
| 38.989 | 0.157 | command:source/read | command_execution |
|
|
| 39.147 | 10.779 | command:source/read | agent_message |
|
|
| 49.926 | 3.106 | item.completed | command_execution |
|
|
| 53.034 | 0.156 | command:source/read | command_execution |
|
|
| 53.191 | 10.966 | command:source/read | command_execution |
|
|
| 64.159 | 0.155 | command:source/read | command_execution |
|
|
| 64.315 | 10.297 | command:source/read | agent_message |
|
|
| 74.613 | 26.154 | item.completed | file_change |
|
|
| 100.813 | 7.228 | command:source/read | agent_message |
|
|
| 108.041 | 0.459 | item.completed | turn.completed |
|
|
| 108.500 | 0.654 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5395
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}.
|
|
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 3.671 |
|
|
| batchPreflight | 0.045 |
|
|
| implementationPacket | 0.422 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
|
|
## Cycle 5396
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '50435b8c109aa0db05152515', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
|
|
Observed command time (union): 0.015 s; between-event time: 89.065 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.732 |
|
|
| batchPreflight | 0.046 |
|
|
| implementationPacket | 0.382 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/cmake-regenerate | 10.636 |
|
|
| post-pipeline/preflight | 0.063 |
|
|
| post-pipeline/build | 30.348 |
|
|
| post-pipeline/artifact-sync | 2.743 |
|
|
| post-pipeline/business-acceptance | 8.256 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.769 | 0.001 | 0 | /bin/bash -lc "sed -n '1,100p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "rg -n 'init\\(\|endRun\|template\|HEADER\|ENTITIES' freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.cpp" |
|
|
| 3 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '1,100p' web/src/techdraw-native-facade.ts" |
|
|
| 4 | source/read | 6.523 | 0.001 | 0 | /bin/bash -lc "rg -n 'DxfPlate\|template\|void CDxfWrite::init\|endRun\|ENTITIES' freecad-source/src/Mod/Import/App/dxf/dxf.cpp freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.h freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 5 | source/read | 11.574 | 0.001 | 0 | /bin/bash -lc "sed -n '70,205p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp" |
|
|
| 6 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "rg -n 'DxfPlate\|set.*Dir\|m_.*[Dd]ir\|ImpExpDxfWrite::ImpExp' freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.cpp freecad-source/src/Mod/Import/App/dxf/dxf.cpp" |
|
|
| 7 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "rg -n 'TechDrawRuntime\|TechDrawRuntimeProbe\|techdraw.*embed\|TechDraw/Templates' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 8 | source/read | 7.246 | 0.001 | 0 | /bin/bash -lc "sed -n '1000,1145p' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 9 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '205,280p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp" |
|
|
| 10 | source/read | 6.872 | 0.001 | 0 | /bin/bash -lc "sed -n '1145,1208p' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 11 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '320,380p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp" |
|
|
| 12 | source/read | 0.036 | 0.001 | 0 | /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt web/src/techdraw-native-facade.ts docs/current/techdraw-export-boundary.md' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.168 | scheduler.cycle.started | thread.started |
|
|
| 0.188 | 9.642 | turn.started | agent_message |
|
|
| 9.830 | 3.769 | item.completed | command_execution |
|
|
| 13.601 | 0.156 | command:source/read | command_execution |
|
|
| 13.758 | 0.155 | command:source/read | command_execution |
|
|
| 13.914 | 6.523 | command:source/read | command_execution |
|
|
| 20.439 | 11.574 | command:source/read | command_execution |
|
|
| 32.014 | 0.155 | command:source/read | command_execution |
|
|
| 32.170 | 0.155 | command:source/read | command_execution |
|
|
| 32.325 | 7.246 | command:source/read | command_execution |
|
|
| 39.573 | 0.156 | command:source/read | command_execution |
|
|
| 39.730 | 6.872 | command:source/read | command_execution |
|
|
| 46.604 | 0.155 | command:source/read | command_execution |
|
|
| 46.760 | 7.585 | command:source/read | agent_message |
|
|
| 54.345 | 25.961 | item.completed | file_change |
|
|
| 80.347 | 7.322 | command:source/read | agent_message |
|
|
| 87.669 | 0.608 | item.completed | turn.completed |
|
|
| 88.277 | 0.802 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5397
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'a400c0992c7b68289a26e028', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.644 |
|
|
| batchPreflight | 0.045 |
|
|
| implementationPacket | 0.434 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
|
|
## Cycle 5398
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '95ffc709b44f6a732d3e342f', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.008 s; between-event time: 65.074 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 1.041 |
|
|
| batchPreflight | 0.044 |
|
|
| implementationPacket | 0.357 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.044 |
|
|
| post-pipeline/build | 0.171 |
|
|
| post-pipeline/artifact-sync | 0.054 |
|
|
| post-pipeline/business-acceptance | 1.985 |
|
|
| post-pipeline/business-audit | 0.686 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.906 | 0.000 | 0 | /bin/bash -lc "sed -n '1,160p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.160 | 0.000 | 0 | /bin/bash -lc "sed -n '1,330p' tools/techdraw-business-cases.mjs" |
|
|
| 3 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,170p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 4 | source/read | 9.373 | 0.001 | 0 | /bin/bash -lc "sed -n '1,200p' web/src/techdraw-native-facade.ts" |
|
|
| 5 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/TechDraw.json' |
|
|
| 6 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "rg -n 'dxf\|DXF\|nativeImportExport' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp" |
|
|
| 7 | other | 0.067 | 0.000 | 0 | /bin/bash -lc 'node --check tools/techdraw-business-cases.mjs' |
|
|
| 8 | other | 0.156 | 0.000 | 0 | /bin/bash -lc "node -e 'JSON.parse(require(\"node:fs\").readFileSync(\"docs/business-acceptance/TechDraw.json\", \"utf8\"))'" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.170 | scheduler.cycle.started | thread.started |
|
|
| 0.216 | 7.147 | turn.started | agent_message |
|
|
| 7.363 | 3.906 | item.completed | command_execution |
|
|
| 11.269 | 0.160 | command:source/read | command_execution |
|
|
| 11.430 | 0.154 | command:source/read | command_execution |
|
|
| 11.586 | 9.373 | command:source/read | command_execution |
|
|
| 20.960 | 0.156 | command:source/read | command_execution |
|
|
| 21.117 | 0.155 | command:source/read | command_execution |
|
|
| 21.273 | 8.577 | command:source/read | agent_message |
|
|
| 29.849 | 23.972 | item.completed | file_change |
|
|
| 53.823 | 0.067 | item.completed | command_execution |
|
|
| 53.891 | 0.156 | command:other | command_execution |
|
|
| 54.048 | 9.463 | command:other | agent_message |
|
|
| 63.510 | 0.489 | item.completed | turn.completed |
|
|
| 64.000 | 1.082 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5399
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'b22b58ca194a3d2c07b5a574', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.013 s; between-event time: 134.138 s; file changes: 2.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 1.043 |
|
|
| batchPreflight | 0.043 |
|
|
| implementationPacket | 0.423 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/cmake-regenerate | 27.580 |
|
|
| post-pipeline/preflight | 0.068 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.472 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 3 | source/read | 0.153 | 0.000 | 0 | /bin/bash -lc "rg -n 'OpenSCAD\|importDxf\|business-cases/v1' tools docs/business-acceptance web/src/openscad-format-facade.ts" |
|
|
| 4 | source/read | 11.438 | 0.002 | 0 | /bin/bash -lc "sed -n '1,220p' tools/draft-business-cases.mjs" |
|
|
| 5 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/wasm-probe-runtime.mjs" |
|
|
| 6 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '266,400p' freecad-source/src/WebAssembly/FreeCADCoreProbe/OpenSCADRuntimeProbe.cpp" |
|
|
| 7 | source/read | 0.158 | 0.000 | 2 | /bin/bash -lc 'ls docs/business-acceptance/OpenSCAD.json tools/openscad-business-cases.mjs;' |
|
|
| 8 | source/read | 0.013 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/Draft.json' |
|
|
| 9 | source/read | 7.750 | 0.001 | 0 | /bin/bash -lc "sed -n '441,555p' freecad-source/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py" |
|
|
| 10 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc 'cat web/src/openscad-format-facade.ts' |
|
|
| 11 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "rg -n 'python\|exec\|FS\|EXPORTED' freecad-source/src/WebAssembly/FreeCADCoreProbe/OpenSCADRuntimeProbe.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt" |
|
|
| 12 | other | 0.059 | 0.000 | 0 | /bin/bash -lc 'node --check tools/openscad-business-cases.mjs' |
|
|
| 13 | other | 0.056 | 0.001 | 0 | /bin/bash -lc 'node --check tools/openscad-business-cases.mjs' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.185 | scheduler.cycle.started | thread.started |
|
|
| 0.225 | 6.311 | turn.started | agent_message |
|
|
| 6.536 | 3.472 | item.completed | command_execution |
|
|
| 10.009 | 0.155 | command:source/read | command_execution |
|
|
| 10.165 | 0.153 | command:source/read | command_execution |
|
|
| 10.319 | 11.438 | command:source/read | command_execution |
|
|
| 21.759 | 0.157 | command:source/read | command_execution |
|
|
| 21.917 | 0.155 | command:source/read | command_execution |
|
|
| 22.073 | 0.158 | command:source/read | command_execution |
|
|
| 22.245 | 7.750 | command:source/read | command_execution |
|
|
| 29.997 | 0.155 | command:source/read | command_execution |
|
|
| 30.152 | 0.154 | command:source/read | command_execution |
|
|
| 30.307 | 8.874 | command:source/read | agent_message |
|
|
| 39.182 | 64.364 | item.completed | file_change |
|
|
| 103.547 | 0.059 | item.completed | command_execution |
|
|
| 103.607 | 15.934 | command:other | agent_message |
|
|
| 119.542 | 4.172 | item.completed | file_change |
|
|
| 123.715 | 0.056 | item.completed | command_execution |
|
|
| 123.772 | 9.206 | command:other | agent_message |
|
|
| 132.978 | 0.409 | item.completed | turn.completed |
|
|
| 133.388 | 0.764 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5400
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'b22b58ca194a3d2c07b5a574', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.000 s; between-event time: 20.049 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.754 |
|
|
| batchPreflight | 0.045 |
|
|
| implementationPacket | 0.434 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/cmake-regenerate | 27.621 |
|
|
| post-pipeline/preflight | 0.069 |
|
|
| post-pipeline/build | 12.889 |
|
|
| post-pipeline/artifact-sync | 0.890 |
|
|
| post-pipeline/business-acceptance | 1.012 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.200 | scheduler.cycle.started | thread.started |
|
|
| 0.230 | 8.677 | turn.started | agent_message |
|
|
| 8.907 | 2.299 | item.completed | file_change |
|
|
| 11.223 | 7.623 | item.completed | agent_message |
|
|
| 18.846 | 0.479 | item.completed | turn.completed |
|
|
| 19.325 | 0.725 | turn.completed | scheduler.cycle.completed |
|
|
|
|
## Cycle 5401
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': '3d7512021f4c6b311036a3af', 'module': 'Points', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
|
|
Observed command time (union): 0.016 s; between-event time: 143.067 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.667 |
|
|
| batchPreflight | 0.044 |
|
|
| implementationPacket | 0.421 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/acceptance-contract-preflight | 0.000 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.255 | 0.000 | 0 | /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md" |
|
|
| 2 | source/read | 0.160 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 3 | source/read | 0.158 | 0.000 | 0 | /bin/bash -lc 'ls docs/business-acceptance' |
|
|
| 4 | source/read | 0.159 | 0.000 | 0 | /bin/bash -lc "sed -n '1,220p' tools/wasm-probe-runtime.mjs" |
|
|
| 5 | source/read | 10.333 | 0.001 | 0 | /bin/bash -lc "rg -n 'desktopBatch\|Points_\|points.create\|points-business' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp tools web/src/points* docs/business-acceptance/Measure.json" |
|
|
| 6 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc "sed -n '395,570p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp" |
|
|
| 7 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/Measure.json tools/measure-business-cases.mjs' |
|
|
| 8 | source/read | 11.244 | 0.002 | 0 | /bin/bash -lc "sed -n '30,200p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp" |
|
|
| 9 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc "sed -n '200,375p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp" |
|
|
| 10 | source/read | 0.155 | 0.000 | 0 | /bin/bash -lc "sed -n '660,690p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp" |
|
|
| 11 | source/read | 0.157 | 0.000 | 0 | /bin/bash -lc "rg --files tools -g '*points*' -g '*Points*'" |
|
|
| 12 | source/read | 0.905 | 0.001 | 0 | /bin/bash -lc "sed -n '1,18p' web/src/points-facade.ts" |
|
|
| 13 | source/read | 0.033 | 0.001 | 0 | /bin/bash -lc "sed -n '1,9p' web/src/points-facade.ts" |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.379 | scheduler.cycle.started | thread.started |
|
|
| 0.407 | 6.006 | turn.started | agent_message |
|
|
| 6.413 | 3.255 | item.completed | command_execution |
|
|
| 9.669 | 0.160 | command:source/read | command_execution |
|
|
| 9.830 | 0.158 | command:source/read | command_execution |
|
|
| 9.988 | 0.159 | command:source/read | command_execution |
|
|
| 10.148 | 10.333 | command:source/read | command_execution |
|
|
| 20.483 | 0.156 | command:source/read | command_execution |
|
|
| 20.639 | 0.155 | command:source/read | command_execution |
|
|
| 20.795 | 11.244 | command:source/read | command_execution |
|
|
| 32.042 | 0.157 | command:source/read | command_execution |
|
|
| 32.200 | 0.155 | command:source/read | command_execution |
|
|
| 32.356 | 0.157 | command:source/read | command_execution |
|
|
| 32.514 | 11.156 | command:source/read | agent_message |
|
|
| 43.671 | 0.905 | item.completed | command_execution |
|
|
| 44.577 | 62.230 | command:source/read | scheduler.stderr |
|
|
| 106.807 | 16.028 | scheduler.stderr | file_change |
|
|
| 122.870 | 20.212 | command:source/read | scheduler.cycle.completed |
|
|
|
|
## Cycle 5402
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'a400c0992c7b68289a26e028', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.769 |
|
|
| batchPreflight | 0.044 |
|
|
| implementationPacket | 0.457 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
|
|
## Cycle 5403
|
|
|
|
Task: FW-P6-FPA-Y; batch: {'id': 'f7b097273390a65b913a7c69', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}.
|
|
Observed command time (union): 0.006 s; between-event time: 44.046 s; file changes: 1.
|
|
|
|
### preparationTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| continue | 0.683 |
|
|
| batchPreflight | 0.046 |
|
|
| implementationPacket | 0.368 |
|
|
|
|
### postPipelineTiming
|
|
|
|
| Step | Seconds |
|
|
|---|---:|
|
|
| post-pipeline/preflight | 0.044 |
|
|
| post-pipeline/build | 0.163 |
|
|
| post-pipeline/artifact-sync | 0.054 |
|
|
| post-pipeline/business-acceptance | 0.946 |
|
|
|
|
### Commands
|
|
|
|
| # | Phase | Wait Before (s) | Execute (s) | Exit | Command |
|
|
|---:|---|---:|---:|---:|---|
|
|
| 1 | source/read | 3.490 | 0.001 | 0 | /bin/bash -lc "sed -n '1,220p' tools/openscad-business-cases.mjs" |
|
|
| 2 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md" |
|
|
| 3 | source/read | 0.154 | 0.000 | 0 | /bin/bash -lc "sed -n '1,130p' docs/current/provided-source-index.md" |
|
|
| 4 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc 'cat docs/business-acceptance/OpenSCAD.json' |
|
|
| 5 | other | 0.061 | 0.000 | 0 | /bin/bash -lc 'node --check tools/openscad-business-cases.mjs' |
|
|
| 6 | source/read | 0.156 | 0.000 | 0 | /bin/bash -lc 'git diff --check -- tools/openscad-business-cases.mjs docs/business-acceptance/OpenSCAD.json' |
|
|
|
|
### Between-Event Intervals
|
|
|
|
| Offset (s) | Seconds | After | Before |
|
|
|---:|---:|---|---|
|
|
| 0.000 | 0.192 | scheduler.cycle.started | thread.started |
|
|
| 0.225 | 6.433 | turn.started | agent_message |
|
|
| 6.658 | 3.490 | item.completed | command_execution |
|
|
| 10.150 | 0.154 | command:source/read | command_execution |
|
|
| 10.305 | 0.154 | command:source/read | command_execution |
|
|
| 10.460 | 0.156 | command:source/read | command_execution |
|
|
| 10.617 | 11.047 | command:source/read | agent_message |
|
|
| 21.664 | 10.822 | item.completed | file_change |
|
|
| 32.488 | 0.061 | item.completed | command_execution |
|
|
| 32.550 | 0.156 | command:other | command_execution |
|
|
| 32.707 | 9.669 | command:source/read | agent_message |
|
|
| 42.376 | 0.457 | item.completed | turn.completed |
|
|
| 42.833 | 1.218 | turn.completed | scheduler.cycle.completed |
|