wangdequan/FreeCADWasmDev
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
72152ef356d2cfa8e2344c7596b3d48f5b3a620e
FreeCADWasmDev/docs/current/efficiency-development-lane.md
wangdequan 9a7c4f0335 Save FreeCAD Web workspace sources and user validation evidence 
IFC native binding remains incomplete; preserve accurate test results.
2026-09-15 22:01:58 +08:00

56 KiB
Raw Blame History

Unattended Execution Timing

Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.

Cycles: 20; aggregate measured time: 2028.648 s.

Phase Total (s) Share Count Average (s) Maximum (s)
agent/post-read 552.570 27.24% 120 4.605 62.229
agent/editing 537.905 26.52% 18 29.884 79.883
post-pipeline/build 241.125 11.89% 12 20.094 45.696
agent/initial-decision 118.444 5.84% 16 7.403 16.737
agent/decision 102.478 5.05% 29 3.534 15.612
pre-agent-pipeline/build 95.912 4.73% 4 23.978 33.841
agent/synthesis 74.028 3.65% 20 3.701 15.934
post-pipeline/cmake-regenerate 65.837 3.25% 3 21.946 27.621
agent/finalization 53.522 2.64% 16 3.345 20.325
preparation/continue 34.525 1.70% 19 1.817 3.792
agent/post-edit 30.341 1.50% 12 2.528 12.138
post-pipeline/business-acceptance 24.215 1.19% 12 2.018 8.256
agent/failure-recovery 20.895 1.03% 4 5.224 7.873
pre-agent-pipeline/business-acceptance 19.605 0.97% 4 4.901 14.328
post-pipeline/artifact-sync 16.936 0.83% 12 1.411 4.210
pre-agent-pipeline/cmake-regenerate 10.662 0.53% 1 10.662 10.662
pre-agent-pipeline/artifact-sync 8.653 0.43% 3 2.884 7.458
preparation/implementationPacket 7.451 0.37% 19 0.392 0.457
pre-agent-pipeline/business-audit 2.692 0.13% 4 0.673 0.711
scheduler/process-start 2.641 0.13% 16 0.165 0.367
post-pipeline/business-audit 2.573 0.13% 4 0.643 0.686
other 2.010 0.10% 16 0.126 1.170
source/read 2.009 0.10% 127 0.016 1.936
preparation/batchPreflight 0.825 0.04% 19 0.043 0.046
post-pipeline/preflight 0.645 0.03% 13 0.050 0.069
pre-agent-pipeline/preflight 0.149 0.01% 3 0.050 0.064
post-pipeline/acceptance-contract-preflight 0.000 0.00% 2 0.000 0.000

Wall-Clock Coverage

First cycle start to last observed event: 2185.014 s. Inside observed cycles: 1498.497 s; between cycles: 686.517 s.

Previous Cycle Next Cycle Gap (s)
5384 5385 77.374
5385 5386 43.379
5386 5387 35.867
5387 5388 39.223
5388 5389 8.058
5389 5390 41.723
5390 5391 11.796
5391 5393 41.649
5393 5394 65.706
5394 5396 112.933
5396 5398 61.389
5398 5399 5.914
5399 5400 30.834
5400 5401 46.022
5401 5403 64.650

Cycle 5384

Task: FW-P6-FPA-Y; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.298 s; between-event time: 139.828 s; file changes: 1.

preparationTiming

Step Seconds
continue 3.792
batchPreflight 0.042
implementationPacket 0.376

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.065
post-pipeline/build 33.267
post-pipeline/artifact-sync 1.839
post-pipeline/business-acceptance 1.236

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 other 0.068 0.001 0 /bin/bash -lc 'node --check tools/meshpart-business-cases.mjs'
2 other 0.158 0.292 0 /bin/bash -lc 'web/node_modules/.bin/tsc --target ES2022 --module ESNext --moduleResolution Bundler --strict --skipLibCheck --noEmit web/src/meshpart-facade.ts'
3 source/read 3.514 0.001 64 /bin/bash -lc 'git diff --check'
4 other 0.058 0.001 0 /bin/bash -lc "node -e 'const fs=require("node:fs"); const c=JSON.parse(fs.readFileSync("docs/business-acceptance/MeshPart.json","utf8")); if(c.coveredIds.length"'!==1 || !fs.existsSync(c.command[1])) process.exit(1); console.log("MeshPart contract JSON and script path valid");'"'"
5 source/read 15.612 0.001 0 /bin/bash -lc 'git diff --check -- docs/business-acceptance/MeshPart.json tools/meshpart-business-cases.mjs web/src/meshpart-facade.ts freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.157 scheduler.cycle.started thread.started
0.172 16.737 turn.started agent_message
16.909 79.883 item.completed file_change
96.796 0.068 item.completed command_execution
96.866 0.158 command:other command_execution
97.316 14.006 command:other agent_message
111.322 3.514 item.completed command_execution
114.838 0.058 command:source/read command_execution
114.897 15.612 command:other command_execution
130.510 8.259 command:source/read agent_message
138.769 0.622 item.completed turn.completed
139.392 0.735 turn.completed scheduler.cycle.completed

Cycle 5385

Task: FW-P6-FPA-Y; batch: {'id': '2a13bf74874253ae0d192210', 'module': 'Fem', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}. Observed command time (union): 0.011 s; between-event time: 64.098 s; file changes: 1.

preparationTiming

Step Seconds
continue 3.533
batchPreflight 0.042
implementationPacket 0.321

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.043
post-pipeline/build 31.092
post-pipeline/artifact-sync 1.290
post-pipeline/business-acceptance 0.701

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 2.131 0.000 0 /bin/bash -lc 'rg -n "feminout|Fem BREP|fem.brep|Z88" freecad-source/src/WebAssembly/FreeCADCoreProbe freecad-source/src/Mod/Fem | head -80'
2 source/read 6.825 0.003 0 /bin/bash -lc "sed -n '1,240p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp; sed -n '1,220p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemDesktopCommands.cpp"
3 source/read 6.055 0.001 0 /bin/bash -lc 'rg -n "feminout|importZ88|Z88|txt" freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp'
4 source/read 2.908 0.001 0 /bin/bash -lc "sed -n '1680,1810p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp; rg -n "Fem.*feminout|feminout|FemGenericFamilyProbe" freecad-source/src/WebAssembly/CMakeLists.txt freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
5 source/read 12.138 0.001 64 /bin/bash -lc 'git diff --check && git diff -- freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp'
6 source/read 6.295 0.001 0 /bin/bash -lc "sed -n '1698,1710p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.152 scheduler.cycle.started thread.started
0.183 5.954 turn.started agent_message
6.137 2.131 item.completed command_execution
8.269 6.825 command:source/read command_execution
15.098 6.055 command:source/read command_execution
21.154 4.659 command:source/read agent_message
25.813 2.908 item.completed command_execution
28.724 6.798 command:source/read agent_message
35.521 3.220 item.completed file_change
38.746 12.138 item.completed command_execution
50.885 6.295 command:source/read command_execution
57.182 5.904 command:source/read agent_message
63.086 0.422 item.completed turn.completed
63.508 0.601 turn.completed scheduler.cycle.completed

Cycle 5386

Task: FW-P6-FPA-Y; batch: {'id': '235b8608095d21baa8dab65a', 'module': 'Fem', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}. Observed command time (union): 0.017 s; between-event time: 100.091 s; file changes: 1.

preparationTiming

Step Seconds
continue 3.565
batchPreflight 0.043
implementationPacket 0.341

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.044
post-pipeline/build 22.592
post-pipeline/artifact-sync 1.557
post-pipeline/business-acceptance 2.425
post-pipeline/business-audit 0.608

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 4.045 0.001 0 /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md"
2 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1,140p' docs/OCCT_GEOMETRY_BOUNDARY.md"
3 source/read 0.153 0.000 0 /bin/bash -lc "rg -n 'z88|numpy|femmesh|feminout' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp"
4 source/read 0.154 0.001 0 /bin/bash -lc "sed -n '1,100p' docs/business-acceptance/Fem.json"
5 source/read 10.190 0.002 0 /bin/bash -lc "sed -n '1,110p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
6 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1680,1820p' freecad-source/src/WebAssembly/FreeCADCoreProbe/FemGenericFamilyProbe.cpp"
7 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1,160p' freecad-source/src/Mod/Fem/femmesh/meshtools.py"
8 source/read 0.155 0.001 0 /bin/bash -lc "sed -n '1,180p' freecad-source/src/Mod/Fem/feminout/importZ88Mesh.py"
9 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,95p' freecad-source/src/Mod/Fem/feminout/importToolsFem.py"
10 source/read 10.621 0.001 0 /bin/bash -lc "rg -n 'np\.|geomtools\.|"'^def '"' freecad-source/src/Mod/Fem/femmesh/meshtools.py"
11 source/read 0.153 0.000 0 /bin/bash -lc 'git diff -- freecad-source/src/Mod/Fem/femmesh/meshtools.py docs/business-acceptance/Fem.json'
12 source/read 0.154 0.000 0 /bin/bash -lc "rg -n 'meshtools.py|importZ88Mesh|femtools/geomtools' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
13 other 11.559 0.001 0 /bin/bash -lc "python3 - <<'PY' import ast from pathlib import Path path = Path('freecad-source/src/Mod/Fem/femmesh/meshtools.py') source = path.read_text() tree = ast.parse(source) lines = source.splitlines() patch = ['*** Begin Patch', '*** Update File: ' + str(path), '@@', '-import numpy as np', '-', ' import FreeCAD', '-', '-from femtools import geomtools'] for function in tree.body: if not isinstance(function, (ast.FunctionDef, ast.AsyncFunctionDef)): continue names = {node.id for node in ast.walk(function) if isinstance(node, ast.Name) and isinstance(node.ctx, ast.Load)} imports = [] if 'np' in names: imports.append(' import numpy as np') if 'geomtools' in names: imports.append(' from femtools import geomtools') if not imports: continue statement = function.body[0] if isinstance(statement, ast.Expr) and isinstance(statement.value, ast.Constant) and isinstance(statement.value.value, str): index = statement.end_lineno else: index = statement.lineno - 1 patch += ['@@'] + [' ' + line for line in lines[max(function.lineno - 1, index - 3):index]] + ['+' + line for line in imports] + ['+'] + [' ' + line for line in lines[index:index + 2]] patch += ['*** End Patch'] print('\n'.join(patch)) PY"
14 source/read 0.036 0.001 0 /bin/bash -lc 'git diff --check -- freecad-source/src/Mod/Fem/femmesh/meshtools.py docs/business-acceptance/Fem.json'
15 other 0.155 0.001 0 /bin/bash -lc "python3 - <<'PY' import ast import json from pathlib import Path path = Path('freecad-source/src/Mod/Fem/femmesh/meshtools.py') tree = ast.parse(path.read_text(), filename=str(path)) for node in tree.body: if isinstance(node, (ast.FunctionDef, ast.AsyncFunctionDef)): names = {item.id for item in ast.walk(node) if isinstance(item, ast.Name) and isinstance(item.ctx, ast.Load)} imports = {alias.asname or alias.name for item in ast.walk(node) if isinstance(item, (ast.Import, ast.ImportFrom)) for alias in item.names} assert names.intersection({'np', 'geomtools'}) <= imports, node.name elif isinstance(node, ast.Import): assert all(alias.name "'!= '"'numpy' for alias in node.names) elif isinstance(node, ast.ImportFrom): assert node.module "'!= '"'femtools' json.loads(Path('docs/business-acceptance/Fem.json').read_text()) print('Python syntax, deferred dependency scope, and contract JSON checks passed.') PY"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.154 scheduler.cycle.started thread.started
0.190 5.484 turn.started agent_message
5.674 4.045 item.completed command_execution
9.720 0.153 command:source/read command_execution
9.874 0.153 command:source/read command_execution
10.028 0.154 command:source/read command_execution
10.184 10.190 command:source/read command_execution
20.376 0.153 command:source/read command_execution
20.529 0.153 command:source/read command_execution
20.683 0.155 command:source/read command_execution
20.840 0.154 command:source/read command_execution
20.995 10.621 command:source/read command_execution
31.617 0.153 command:source/read command_execution
31.771 0.154 command:source/read command_execution
31.926 17.674 command:source/read agent_message
49.600 11.559 item.completed command_execution
61.161 30.532 command:other file_change
91.733 0.155 command:source/read command_execution
91.889 6.454 command:other agent_message
98.344 0.520 item.completed turn.completed
98.864 1.244 turn.completed scheduler.cycle.completed

Cycle 5387

Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.006 s; between-event time: 47.057 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.667
batchPreflight 0.043
implementationPacket 0.385

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.040
post-pipeline/build 30.265
post-pipeline/artifact-sync 1.166
post-pipeline/business-acceptance 1.320

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.947 0.000 0 /bin/bash -lc "sed -n '400,465p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
2 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md"
3 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1,160p' docs/OCCT_GEOMETRY_BOUNDARY.md"
4 source/read 0.157 0.000 0 /bin/bash -lc "sed -n '1,160p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
5 source/read 0.035 0.001 0 /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp docs/current/measure-8db7edb6c2b2f3ca91ee99d5-boundaries.md'
6 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '433,452p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.149 scheduler.cycle.started thread.started
0.174 5.921 turn.started agent_message
6.095 3.947 item.completed command_execution
10.043 0.154 command:source/read command_execution
10.198 0.153 command:source/read command_execution
10.351 0.157 command:source/read command_execution
10.510 6.538 command:source/read agent_message
17.048 16.798 item.completed file_change
33.885 0.153 command:source/read command_execution
34.039 11.991 command:source/read agent_message
46.030 0.352 item.completed turn.completed
46.383 0.680 turn.completed scheduler.cycle.completed

Cycle 5388

Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.008 s; between-event time: 89.051 s; file changes: 1.

preparationTiming

Step Seconds
continue 3.559
batchPreflight 0.042
implementationPacket 0.381

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.041
post-pipeline/build 0.192
post-pipeline/artifact-sync 0.052
post-pipeline/business-acceptance 1.313
post-pipeline/business-audit 0.632

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 2.701 0.001 0 /bin/bash -lc "sed -n '1,180p' tools/measure-business-cases.mjs"
2 source/read 0.152 0.000 0 /bin/bash -lc "rg -n 'createRecompute|position1|position2|distance|recompute|resourcesReleased' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
3 source/read 7.198 0.001 0 /bin/bash -lc "sed -n '275,320p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
4 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1,240p' web/src/facade-envelope.ts"
5 other 0.062 0.001 0 /bin/bash -lc 'node --check tools/measure-business-cases.mjs'
6 source/read 0.153 0.000 0 /bin/bash -lc 'git diff --check -- tools/measure-business-cases.mjs'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.145 scheduler.cycle.started thread.started
0.160 8.237 turn.started agent_message
8.398 2.701 item.completed command_execution
11.100 0.152 command:source/read command_execution
11.253 7.198 command:source/read command_execution
18.453 0.153 command:source/read command_execution
18.607 10.459 command:source/read agent_message
29.066 3.604 item.completed scheduler.stderr
32.671 37.770 scheduler.stderr file_change
70.442 0.062 item.completed command_execution
70.505 0.153 command:other command_execution
70.659 16.468 command:source/read agent_message
87.127 0.419 item.completed turn.completed
87.546 1.513 turn.completed scheduler.cycle.completed

Cycle 5389

Task: FW-P6-FPA-Y; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.583 s; between-event time: 99.536 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.681
batchPreflight 0.042
implementationPacket 0.389

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.040
post-pipeline/build 34.294
post-pipeline/artifact-sync 3.028
post-pipeline/business-acceptance 1.420

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 4.043 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md"
2 source/read 0.153 0.001 0 /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
3 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '1,240p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp"
4 source/read 0.153 0.000 0 /bin/bash -lc "sed -n '1,170p' tools/meshpart-business-cases.mjs"
5 source/read 10.165 0.001 0 /bin/bash -lc "sed -n '240,315p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp"
6 source/read 0.154 0.000 0 /bin/bash -lc "rg -n 'facade success|MeshPartBusinessInput' docs/current/business-evidence -g '*.json'"
7 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,145p' tools/wasm-probe-runtime.mjs"
8 other 10.131 0.540 0 /bin/bash -lc "node --input-type=module -e 'import {loadWasmProbe} from "./tools/wasm-probe-runtime.mjs"; const {kernel}=await loadWasmProbe("freecad-source/build-web/configure/bin","FreeCADWebMeshPartRuntimeProbe",{printErr:console.error}); try { console.log(kernel.ccall("fc_web_dispatch_json","string",["string"],[JSON.stringify({cmd:"meshpart.createRecompute",args:{schema:"freecad-web-meshpart/create-recompute/v1",module:"MeshPart",action:"create/recompute",shape:"Part::Box",method:"Standard",size:[2,3,4],documentName:"MeshPartBusinessInput",keepDocument:true}})])); } finally {kernel.PThread?.terminateAllThreads?.();process.exit(0);}'"
9 other 0.060 0.001 0 /bin/bash -lc 'node --check tools/meshpart-business-cases.mjs'
10 source/read 0.153 0.000 64 /bin/bash -lc 'git diff --check'
11 source/read 6.669 0.001 0 /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp tools/meshpart-business-cases.mjs'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.163 scheduler.cycle.started thread.started
0.190 7.536 turn.started agent_message
7.726 4.043 item.completed command_execution
11.770 0.153 command:source/read command_execution
11.925 0.156 command:source/read command_execution
12.081 0.153 command:source/read command_execution
12.236 10.165 command:source/read command_execution
22.402 0.154 command:source/read command_execution
22.558 0.154 command:source/read command_execution
22.737 10.131 command:source/read command_execution
33.410 12.407 command:other agent_message
45.817 37.790 item.completed file_change
83.611 0.060 item.completed command_execution
83.672 0.153 command:other command_execution
83.832 6.669 command:source/read command_execution
90.503 7.539 command:source/read agent_message
98.042 0.520 item.completed turn.completed
98.562 1.558 turn.completed scheduler.cycle.completed

Cycle 5390

Task: UNATTENDED-OPTIMIZATION; batch: {'id': '13be94f374056cf89f344ebc', 'module': 'MeshPart', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 3.126 s; between-event time: 146.993 s; file changes: 2.

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 2.265 0.003 0 /bin/bash -lc "sed -n '1,220p' docs/UNATTENDED_WORKFLOW.md && sed -n '1,180p' docs/current/provided-source-index.md && cat docs/current/periodic-optimization/optimization-000050-context.json"
2 source/read 8.052 0.005 0 /bin/bash -lc "cat docs/WEB_BUSINESS_MIGRATION_RULES.md docs/OCCT_GEOMETRY_BOUNDARY.md; sed -n '1,360p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeshPartRuntimeProbe.cpp; python3 tools/fast_source_search.py --help; python3 tools/run_business_acceptance.py --help"
3 source/read 9.915 0.003 0 /bin/bash -lc "python3 tools/fast_source_search.py --pattern 'MeshPart|sync|artifact|build-dir|BUILD' --paths tools/run_business_acceptance.py tools/wasm-probe-runtime.mjs tools/meshpart-business-cases.mjs --context 2 --max-count 65; python3 -c 'import json,pathlib; p=pathlib.Path("docs/current/business-acceptance.json"); d=json.loads(p.read_text()); print(json.dumps(d,ensure_ascii=False)[-18000:])'"
4 other 5.577 1.170 1 /bin/bash -lc 'node tools/meshpart-business-cases.mjs'
5 source/read 7.873 0.002 0 /bin/bash -lc "sed -n '1,155p' tools/meshpart-business-cases.mjs; sed -n '1,150p' tools/wasm-probe-runtime.mjs; python3 tools/fast_source_search.py 'meshFromShape|LinearDeflection|AngularDeflection' --path freecad-source/src/Mod/MeshPart/App/AppMeshPartPy.cpp --context 6 --max-count 18; rg --files tools -g 'sync' -g 'pipeline'"
6 source/read 5.408 0.003 0 /bin/bash -lc "sed -n '1,220p' web/src/facade-envelope.ts; sed -n '90,220p' freecad-source/src/Mod/MeshPart/App/AppMeshPartPy.cpp; sed -n '1,160p' tools/run_business_acceptance.py; python3 tools/fast_source_search.py 'sync.*py|artifact-sync|FREECAD.*BUILD|FREECAD.*DIR' --path tools/run_incremental_module_pipeline.py --context 2 --max-count 20; python3 -c 'import json; d=json.load(open("web/public/modules/manifest.json")); print(json.dumps(d["modules"]["MeshPart"],indent=2))'"
7 source/read 0.157 1.936 0 /bin/bash -lc 'python3 tools/inspect_web_module_artifacts.py --module MeshPart; sha256sum freecad-source/build-web/configure/bin/FreeCADWebMeshPartRuntimeProbe.{js,wasm,worker.js} web/public/kernel/FreeCADWebMeshPartRuntimeProbe.{js,wasm,worker.js}; python3 tools/run_business_acceptance.py --module MeshPart --ids MeshPart:meshpart.createRecompute --reuse'
8 source/read 21.912 0.001 0 /bin/bash -lc "python3 -c 'import json; d=json.load(open("docs/current/business-evidence/db0135e9c16a1c071760b775-20260909T002101204948.json")); print("evidence keys:",list(d)); print("stderr:",d.get("stderr")); print("cases:",[(r["capabilityId"],r["status"],len(r["cases"]),sum(len(c["assertions"]) for c in r["cases"])) for r in d["results"]]); print("areas:",[c.get("actual",{}).get("result",{}).get("area") for r in d["results"] for c in r["cases"]])'; python3 tools/run_business_acceptance.py --module MeshPart --ids MeshPart:meshpart.createRecompute --reuse; git diff --check -- tools/meshpart-business-cases.mjs"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.159 scheduler.cycle.started thread.started
0.192 7.656 turn.started agent_message
7.847 2.265 item.completed command_execution
10.116 8.052 command:source/read command_execution
18.173 9.915 command:source/read command_execution
28.091 5.577 command:source/read command_execution
34.838 7.873 command:other command_execution
42.713 7.692 command:source/read agent_message
50.405 5.408 item.completed command_execution
55.816 17.735 command:source/read file_change
73.552 0.157 item.completed command_execution
75.646 21.912 command:source/read command_execution
97.560 10.392 command:source/read agent_message
107.953 30.725 item.completed file_change
138.679 9.928 item.completed agent_message
148.607 0.419 item.completed turn.completed
149.026 1.093 turn.completed scheduler.cycle.completed

Cycle 5391

Task: FW-P6-FPA-Y; batch: {'id': 'fc1022803c4e331856d7aa8a', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.008 s; between-event time: 115.067 s; file changes: 1.

preparationTiming

Step Seconds
continue 3.494
batchPreflight 0.042
implementationPacket 0.396

postPipelineTiming

Step Seconds
post-pipeline/acceptance-contract-preflight 0.000

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 4.863 0.001 0 /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md"
2 source/read 0.152 0.000 0 /bin/bash -lc "sed -n '1,180p' tools/measure-business-cases.mjs"
3 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '1,200p' web/src/measure-persistence-facade.ts"
4 source/read 0.153 0.000 0 /bin/bash -lc "rg -n 'saveReopen|save.reopen|persistence|position1|document' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
5 source/read 0.152 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
6 source/read 11.344 0.001 0 /bin/bash -lc "sed -n '265,325p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
7 source/read 0.152 0.000 0 /bin/bash -lc "sed -n '500p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
8 source/read 0.152 0.000 0 /bin/bash -lc "rg -n 'measure.saveReopen|dispatchMeasurePersistence|MEASURE_PERSISTENCE_FIXTURE' web/src tools/measure docs/business-acceptance/Measure.json"
9 source/read 0.152 0.000 0 /bin/bash -lc "rg -n 'saveAs\(|openDocument\(' freecad-source/src/App/Document.h freecad-source/src/App/Application.h"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.150 scheduler.cycle.started thread.started
0.181 5.456 turn.started agent_message
5.637 4.863 item.completed command_execution
10.501 0.152 command:source/read command_execution
10.654 0.156 command:source/read command_execution
10.811 0.153 command:source/read command_execution
10.964 0.152 command:source/read command_execution
11.117 11.344 command:source/read command_execution
22.462 0.152 command:source/read command_execution
22.615 0.152 command:source/read command_execution
22.768 0.152 command:source/read command_execution
22.920 14.663 command:source/read agent_message
37.583 57.145 item.completed file_change
94.733 20.342 scheduler.stderr scheduler.cycle.completed

Cycle 5392

Task: FW-P6-FPA-Y; batch: {'id': '8db7edb6c2b2f3ca91ee99d5', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

preparationTiming

Step Seconds
continue 3.560
batchPreflight 0.043
implementationPacket 0.401

Commands

# Phase Wait Before (s) Execute (s) Exit Command

Between-Event Intervals

Offset (s) Seconds After Before

Cycle 5393

Task: FW-P6-FPA-Y; batch: {'id': 'fc1022803c4e331856d7aa8a', 'module': 'Measure', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.008 s; between-event time: 88.061 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.975
batchPreflight 0.042
implementationPacket 0.397

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.040
post-pipeline/build 0.156
post-pipeline/artifact-sync 0.053
post-pipeline/business-acceptance 1.408
post-pipeline/business-audit 0.647

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.941 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/current/provided-source-index.md"
2 source/read 0.153 0.001 0 /bin/bash -lc 'cat tools/measure-business-cases.mjs web/src/measure-persistence-facade.ts docs/business-acceptance/Measure.json docs/WEB_BUSINESS_MIGRATION_RULES.md'
3 source/read 0.152 0.000 0 /bin/bash -lc "rg -n 'saveReopen|Persistence|persistence|save.reopen' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp tools/measure web/src/measure*"
4 source/read 6.228 0.002 0 /bin/bash -lc "sed -n '240,375p' freecad-source/src/WebAssembly/FreeCADCoreProbe/MeasureKernelProbe.cpp"
5 source/read 0.153 0.000 0 /bin/bash -lc 'cat tools/wasm-probe-runtime.mjs web/src/measure-facade.ts'
6 other 0.061 0.001 0 /bin/bash -lc 'node --check tools/measure-business-cases.mjs'
7 source/read 0.153 0.000 0 /bin/bash -lc 'git diff --check -- tools/measure-business-cases.mjs docs/business-acceptance/Measure.json'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.139 scheduler.cycle.started thread.started
0.165 5.725 turn.started agent_message
5.890 3.941 item.completed command_execution
9.832 0.153 command:source/read command_execution
9.986 0.152 command:source/read command_execution
10.139 6.228 command:source/read command_execution
16.369 0.153 command:source/read command_execution
16.523 10.462 command:source/read agent_message
26.985 52.535 item.completed file_change
79.521 0.061 item.completed command_execution
79.583 0.153 command:other command_execution
79.737 7.048 command:source/read agent_message
86.785 0.381 item.completed turn.completed
87.166 0.902 turn.completed scheduler.cycle.completed

Cycle 5394

Task: FW-P6-FPA-Y; batch: {'id': '50435b8c109aa0db05152515', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}. Observed command time (union): 0.026 s; between-event time: 109.129 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.695
batchPreflight 0.042
implementationPacket 0.366

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.044
post-pipeline/build 45.696
post-pipeline/artifact-sync 4.210
post-pipeline/business-acceptance 2.193

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.559 0.002 0 /bin/bash -lc "sed -n '1,220p' docs/current/module-implementation-packet.json"
2 source/read 0.157 0.000 64 /bin/bash -lc 'git status --short'
3 source/read 0.014 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/UNATTENDED_WORKFLOW.md"
4 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '110,215p' tools/techdraw-business-cases.mjs"
5 source/read 7.620 0.001 0 /bin/bash -lc "sed -n '1480,1740p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp"
6 source/read 0.162 0.000 0 /bin/bash -lc 'cat web/src/techdraw-native-facade.ts'
7 source/read 0.157 0.000 0 /bin/bash -lc "sed -n '350,440p' web/src/workbench-shell.tsx"
8 source/read 0.157 0.000 0 /bin/bash -lc 'cat docs/OCCT_GEOMETRY_BOUNDARY.md'
9 source/read 7.194 0.001 0 /bin/bash -lc "rg -n 'exportDrawing|viewPartAs|DXF|dxf' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp"
10 other 0.163 0.000 0 /bin/bash -lc "node -e 'const p=require("./docs/current/module-implementation-packet.json"); console.log(JSON.stringify({sourceRecords:p.sourceRecords,excerpts:p.editableExcerpts.filter(x=>x.path.includes("Runtime"))},null,2))' "
11 source/read 5.547 0.004 0 /bin/bash -lc "sed -n '250,492p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp"
12 source/read 8.366 0.002 0 /bin/bash -lc "sed -n '1,240p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp"
13 source/read 0.157 0.000 0 /bin/bash -lc 'git diff --stat -- freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/workbench-shell.tsx web/src/techdraw-native-facade.ts'
14 source/read 3.106 0.001 0 /bin/bash -lc "sed -n '380,560p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp"
15 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '1,190p' freecad-source/src/Mod/TechDraw/App/TechDrawExport.cpp"
16 source/read 10.966 0.001 0 /bin/bash -lc "sed -n '560,710p' freecad-source/src/Mod/TechDraw/App/AppTechDrawPy.cpp"
17 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '240,275p' web/src/desktop-command-dispatcher.ts"
18 source/read 0.039 0.001 0 /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp web/src/workbench-shell.tsx tools/techdraw-business-cases.mjs docs/current/techdraw-export-boundary.md'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.167 scheduler.cycle.started thread.started
0.197 5.522 turn.started agent_message
5.720 3.559 item.completed command_execution
9.282 0.157 command:source/read command_execution
9.454 0.156 command:source/read command_execution
9.610 7.620 command:source/read command_execution
17.233 0.162 command:source/read command_execution
17.395 0.157 command:source/read command_execution
17.553 0.157 command:source/read command_execution
17.711 7.194 command:source/read command_execution
24.906 0.163 command:source/read command_execution
25.069 5.547 command:other command_execution
30.621 8.366 command:source/read command_execution
38.989 0.157 command:source/read command_execution
39.147 10.779 command:source/read agent_message
49.926 3.106 item.completed command_execution
53.034 0.156 command:source/read command_execution
53.191 10.966 command:source/read command_execution
64.159 0.155 command:source/read command_execution
64.315 10.297 command:source/read agent_message
74.613 26.154 item.completed file_change
100.813 7.228 command:source/read agent_message
108.041 0.459 item.completed turn.completed
108.500 0.654 turn.completed scheduler.cycle.completed

Cycle 5395

Task: FW-P6-FPA-Y; batch: {'id': '178f29a4d093938b98188c3c', 'module': 'Web', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 10}. Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

preparationTiming

Step Seconds
continue 3.671
batchPreflight 0.045
implementationPacket 0.422

Commands

# Phase Wait Before (s) Execute (s) Exit Command

Between-Event Intervals

Offset (s) Seconds After Before

Cycle 5396

Task: FW-P6-FPA-Y; batch: {'id': '50435b8c109aa0db05152515', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}. Observed command time (union): 0.015 s; between-event time: 89.065 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.732
batchPreflight 0.046
implementationPacket 0.382

postPipelineTiming

Step Seconds
post-pipeline/cmake-regenerate 10.636
post-pipeline/preflight 0.063
post-pipeline/build 30.348
post-pipeline/artifact-sync 2.743
post-pipeline/business-acceptance 8.256

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.769 0.001 0 /bin/bash -lc "sed -n '1,100p' docs/current/provided-source-index.md"
2 source/read 0.156 0.000 0 /bin/bash -lc "rg -n 'init\(|endRun|template|HEADER|ENTITIES' freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.cpp"
3 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '1,100p' web/src/techdraw-native-facade.ts"
4 source/read 6.523 0.001 0 /bin/bash -lc "rg -n 'DxfPlate|template|void CDxfWrite::init|endRun|ENTITIES' freecad-source/src/Mod/Import/App/dxf/dxf.cpp freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.h freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
5 source/read 11.574 0.001 0 /bin/bash -lc "sed -n '70,205p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp"
6 source/read 0.155 0.000 0 /bin/bash -lc "rg -n 'DxfPlate|set.Dir|m_.[Dd]ir|ImpExpDxfWrite::ImpExp' freecad-source/src/Mod/Import/App/dxf/ImpExpDxf.cpp freecad-source/src/Mod/Import/App/dxf/dxf.cpp"
7 source/read 0.155 0.000 0 /bin/bash -lc "rg -n 'TechDrawRuntime|TechDrawRuntimeProbe|techdraw.*embed|TechDraw/Templates' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
8 source/read 7.246 0.001 0 /bin/bash -lc "sed -n '1000,1145p' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
9 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '205,280p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp"
10 source/read 6.872 0.001 0 /bin/bash -lc "sed -n '1145,1208p' freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
11 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '320,380p' freecad-source/src/Mod/Import/App/dxf/dxf.cpp"
12 source/read 0.036 0.001 0 /bin/bash -lc 'git diff --check -- freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt web/src/techdraw-native-facade.ts docs/current/techdraw-export-boundary.md'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.168 scheduler.cycle.started thread.started
0.188 9.642 turn.started agent_message
9.830 3.769 item.completed command_execution
13.601 0.156 command:source/read command_execution
13.758 0.155 command:source/read command_execution
13.914 6.523 command:source/read command_execution
20.439 11.574 command:source/read command_execution
32.014 0.155 command:source/read command_execution
32.170 0.155 command:source/read command_execution
32.325 7.246 command:source/read command_execution
39.573 0.156 command:source/read command_execution
39.730 6.872 command:source/read command_execution
46.604 0.155 command:source/read command_execution
46.760 7.585 command:source/read agent_message
54.345 25.961 item.completed file_change
80.347 7.322 command:source/read agent_message
87.669 0.608 item.completed turn.completed
88.277 0.802 turn.completed scheduler.cycle.completed

Cycle 5397

Task: FW-P6-FPA-Y; batch: {'id': 'a400c0992c7b68289a26e028', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

preparationTiming

Step Seconds
continue 0.644
batchPreflight 0.045
implementationPacket 0.434

Commands

# Phase Wait Before (s) Execute (s) Exit Command

Between-Event Intervals

Offset (s) Seconds After Before

Cycle 5398

Task: FW-P6-FPA-Y; batch: {'id': '95ffc709b44f6a732d3e342f', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.008 s; between-event time: 65.074 s; file changes: 1.

preparationTiming

Step Seconds
continue 1.041
batchPreflight 0.044
implementationPacket 0.357

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.044
post-pipeline/build 0.171
post-pipeline/artifact-sync 0.054
post-pipeline/business-acceptance 1.985
post-pipeline/business-audit 0.686

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.906 0.000 0 /bin/bash -lc "sed -n '1,160p' docs/current/provided-source-index.md"
2 source/read 0.160 0.000 0 /bin/bash -lc "sed -n '1,330p' tools/techdraw-business-cases.mjs"
3 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,170p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
4 source/read 9.373 0.001 0 /bin/bash -lc "sed -n '1,200p' web/src/techdraw-native-facade.ts"
5 source/read 0.156 0.000 0 /bin/bash -lc 'cat docs/business-acceptance/TechDraw.json'
6 source/read 0.155 0.000 0 /bin/bash -lc "rg -n 'dxf|DXF|nativeImportExport' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawRuntimeProbe.cpp"
7 other 0.067 0.000 0 /bin/bash -lc 'node --check tools/techdraw-business-cases.mjs'
8 other 0.156 0.000 0 /bin/bash -lc "node -e 'JSON.parse(require("node:fs").readFileSync("docs/business-acceptance/TechDraw.json", "utf8"))'"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.170 scheduler.cycle.started thread.started
0.216 7.147 turn.started agent_message
7.363 3.906 item.completed command_execution
11.269 0.160 command:source/read command_execution
11.430 0.154 command:source/read command_execution
11.586 9.373 command:source/read command_execution
20.960 0.156 command:source/read command_execution
21.117 0.155 command:source/read command_execution
21.273 8.577 command:source/read agent_message
29.849 23.972 item.completed file_change
53.823 0.067 item.completed command_execution
53.891 0.156 command:other command_execution
54.048 9.463 command:other agent_message
63.510 0.489 item.completed turn.completed
64.000 1.082 turn.completed scheduler.cycle.completed

Cycle 5399

Task: FW-P6-FPA-Y; batch: {'id': 'b22b58ca194a3d2c07b5a574', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.013 s; between-event time: 134.138 s; file changes: 2.

preparationTiming

Step Seconds
continue 1.043
batchPreflight 0.043
implementationPacket 0.423

postPipelineTiming

Step Seconds
post-pipeline/cmake-regenerate 27.580
post-pipeline/preflight 0.068

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.472 0.000 0 /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md"
2 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
3 source/read 0.153 0.000 0 /bin/bash -lc "rg -n 'OpenSCAD|importDxf|business-cases/v1' tools docs/business-acceptance web/src/openscad-format-facade.ts"
4 source/read 11.438 0.002 0 /bin/bash -lc "sed -n '1,220p' tools/draft-business-cases.mjs"
5 source/read 0.157 0.000 0 /bin/bash -lc "sed -n '1,220p' tools/wasm-probe-runtime.mjs"
6 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '266,400p' freecad-source/src/WebAssembly/FreeCADCoreProbe/OpenSCADRuntimeProbe.cpp"
7 source/read 0.158 0.000 2 /bin/bash -lc 'ls docs/business-acceptance/OpenSCAD.json tools/openscad-business-cases.mjs;'
8 source/read 0.013 0.000 0 /bin/bash -lc 'cat docs/business-acceptance/Draft.json'
9 source/read 7.750 0.001 0 /bin/bash -lc "sed -n '441,555p' freecad-source/src/Mod/OpenSCAD/OpenSCAD2Dgeom.py"
10 source/read 0.155 0.000 0 /bin/bash -lc 'cat web/src/openscad-format-facade.ts'
11 source/read 0.154 0.000 0 /bin/bash -lc "rg -n 'python|exec|FS|EXPORTED' freecad-source/src/WebAssembly/FreeCADCoreProbe/OpenSCADRuntimeProbe.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/CMakeLists.txt"
12 other 0.059 0.000 0 /bin/bash -lc 'node --check tools/openscad-business-cases.mjs'
13 other 0.056 0.001 0 /bin/bash -lc 'node --check tools/openscad-business-cases.mjs'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.185 scheduler.cycle.started thread.started
0.225 6.311 turn.started agent_message
6.536 3.472 item.completed command_execution
10.009 0.155 command:source/read command_execution
10.165 0.153 command:source/read command_execution
10.319 11.438 command:source/read command_execution
21.759 0.157 command:source/read command_execution
21.917 0.155 command:source/read command_execution
22.073 0.158 command:source/read command_execution
22.245 7.750 command:source/read command_execution
29.997 0.155 command:source/read command_execution
30.152 0.154 command:source/read command_execution
30.307 8.874 command:source/read agent_message
39.182 64.364 item.completed file_change
103.547 0.059 item.completed command_execution
103.607 15.934 command:other agent_message
119.542 4.172 item.completed file_change
123.715 0.056 item.completed command_execution
123.772 9.206 command:other agent_message
132.978 0.409 item.completed turn.completed
133.388 0.764 turn.completed scheduler.cycle.completed

Cycle 5400

Task: FW-P6-FPA-Y; batch: {'id': 'b22b58ca194a3d2c07b5a574', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.000 s; between-event time: 20.049 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.754
batchPreflight 0.045
implementationPacket 0.434

postPipelineTiming

Step Seconds
post-pipeline/cmake-regenerate 27.621
post-pipeline/preflight 0.069
post-pipeline/build 12.889
post-pipeline/artifact-sync 0.890
post-pipeline/business-acceptance 1.012

Commands

# Phase Wait Before (s) Execute (s) Exit Command

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.200 scheduler.cycle.started thread.started
0.230 8.677 turn.started agent_message
8.907 2.299 item.completed file_change
11.223 7.623 item.completed agent_message
18.846 0.479 item.completed turn.completed
19.325 0.725 turn.completed scheduler.cycle.completed

Cycle 5401

Task: FW-P6-FPA-Y; batch: {'id': '3d7512021f4c6b311036a3af', 'module': 'Points', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}. Observed command time (union): 0.016 s; between-event time: 143.067 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.667
batchPreflight 0.044
implementationPacket 0.421

postPipelineTiming

Step Seconds
post-pipeline/acceptance-contract-preflight 0.000

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.255 0.000 0 /bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md"
2 source/read 0.160 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
3 source/read 0.158 0.000 0 /bin/bash -lc 'ls docs/business-acceptance'
4 source/read 0.159 0.000 0 /bin/bash -lc "sed -n '1,220p' tools/wasm-probe-runtime.mjs"
5 source/read 10.333 0.001 0 /bin/bash -lc "rg -n 'desktopBatch|Points_|points.create|points-business' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp tools web/src/points* docs/business-acceptance/Measure.json"
6 source/read 0.156 0.000 0 /bin/bash -lc "sed -n '395,570p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp"
7 source/read 0.155 0.000 0 /bin/bash -lc 'cat docs/business-acceptance/Measure.json tools/measure-business-cases.mjs'
8 source/read 11.244 0.002 0 /bin/bash -lc "sed -n '30,200p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp"
9 source/read 0.157 0.000 0 /bin/bash -lc "sed -n '200,375p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp"
10 source/read 0.155 0.000 0 /bin/bash -lc "sed -n '660,690p' freecad-source/src/WebAssembly/FreeCADCoreProbe/PointsRuntimeProbe.cpp"
11 source/read 0.157 0.000 0 /bin/bash -lc "rg --files tools -g 'points' -g 'Points'"
12 source/read 0.905 0.001 0 /bin/bash -lc "sed -n '1,18p' web/src/points-facade.ts"
13 source/read 0.033 0.001 0 /bin/bash -lc "sed -n '1,9p' web/src/points-facade.ts"

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.379 scheduler.cycle.started thread.started
0.407 6.006 turn.started agent_message
6.413 3.255 item.completed command_execution
9.669 0.160 command:source/read command_execution
9.830 0.158 command:source/read command_execution
9.988 0.159 command:source/read command_execution
10.148 10.333 command:source/read command_execution
20.483 0.156 command:source/read command_execution
20.639 0.155 command:source/read command_execution
20.795 11.244 command:source/read command_execution
32.042 0.157 command:source/read command_execution
32.200 0.155 command:source/read command_execution
32.356 0.157 command:source/read command_execution
32.514 11.156 command:source/read agent_message
43.671 0.905 item.completed command_execution
44.577 62.230 command:source/read scheduler.stderr
106.807 16.028 scheduler.stderr file_change
122.870 20.212 command:source/read scheduler.cycle.completed

Cycle 5402

Task: FW-P6-FPA-Y; batch: {'id': 'a400c0992c7b68289a26e028', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.

preparationTiming

Step Seconds
continue 0.769
batchPreflight 0.044
implementationPacket 0.457

Commands

# Phase Wait Before (s) Execute (s) Exit Command

Between-Event Intervals

Offset (s) Seconds After Before

Cycle 5403

Task: FW-P6-FPA-Y; batch: {'id': 'f7b097273390a65b913a7c69', 'module': 'OpenSCAD', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 1}. Observed command time (union): 0.006 s; between-event time: 44.046 s; file changes: 1.

preparationTiming

Step Seconds
continue 0.683
batchPreflight 0.046
implementationPacket 0.368

postPipelineTiming

Step Seconds
post-pipeline/preflight 0.044
post-pipeline/build 0.163
post-pipeline/artifact-sync 0.054
post-pipeline/business-acceptance 0.946

Commands

# Phase Wait Before (s) Execute (s) Exit Command
1 source/read 3.490 0.001 0 /bin/bash -lc "sed -n '1,220p' tools/openscad-business-cases.mjs"
2 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,180p' docs/WEB_BUSINESS_MIGRATION_RULES.md"
3 source/read 0.154 0.000 0 /bin/bash -lc "sed -n '1,130p' docs/current/provided-source-index.md"
4 source/read 0.156 0.000 0 /bin/bash -lc 'cat docs/business-acceptance/OpenSCAD.json'
5 other 0.061 0.000 0 /bin/bash -lc 'node --check tools/openscad-business-cases.mjs'
6 source/read 0.156 0.000 0 /bin/bash -lc 'git diff --check -- tools/openscad-business-cases.mjs docs/business-acceptance/OpenSCAD.json'

Between-Event Intervals

Offset (s) Seconds After Before
0.000 0.192 scheduler.cycle.started thread.started
0.225 6.433 turn.started agent_message
6.658 3.490 item.completed command_execution
10.150 0.154 command:source/read command_execution
10.305 0.154 command:source/read command_execution
10.460 0.156 command:source/read command_execution
10.617 11.047 command:source/read agent_message
21.664 10.822 item.completed file_change
32.488 0.061 item.completed command_execution
32.550 0.156 command:other command_execution
32.707 9.669 command:source/read agent_message
42.376 0.457 item.completed turn.completed
42.833 1.218 turn.completed scheduler.cycle.completed
Reference in New Issue View Git Blame Copy Permalink