Add Chromium-only Blender WebEngine parity work

blender-5.2.0/extern/gmp-source/mpn/alpha/mode1o.asm

@@ -0,0 +1,209 @@
+dnl  Alpha mpn_modexact_1c_odd -- mpn exact remainder
+
+dnl  Copyright 2003, 2004 Free Software Foundation, Inc.
+
+dnl  This file is part of the GNU MP Library.
+dnl
+dnl  The GNU MP Library is free software; you can redistribute it and/or modify
+dnl  it under the terms of either:
+dnl
+dnl    * the GNU Lesser General Public License as published by the Free
+dnl      Software Foundation; either version 3 of the License, or (at your
+dnl      option) any later version.
+dnl
+dnl  or
+dnl
+dnl    * the GNU General Public License as published by the Free Software
+dnl      Foundation; either version 2 of the License, or (at your option) any
+dnl      later version.
+dnl
+dnl  or both in parallel, as here.
+dnl
+dnl  The GNU MP Library is distributed in the hope that it will be useful, but
+dnl  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+dnl  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+dnl  for more details.
+dnl
+dnl  You should have received copies of the GNU General Public License and the
+dnl  GNU Lesser General Public License along with the GNU MP Library.  If not,
+dnl  see https://www.gnu.org/licenses/.
+
+include(`../config.m4')
+
+
+C      cycles/limb
+C EV4:    47
+C EV5:    30
+C EV6:    15
+
+
+C mp_limb_t mpn_modexact_1c_odd (mp_srcptr src, mp_size_t size, mp_limb_t d,
+C                                mp_limb_t c)
+C
+C This code follows the "alternate" code in mpn/generic/mode1o.c,
+C eliminating cbit+climb from the dependent chain.  This leaves,
+C
+C        ev4   ev5   ev6
+C         1     3     1    subq   y = x - h
+C        23    13     7    mulq   q = y * inverse
+C        23    14     7    umulh  h = high (q * d)
+C        --    --    --
+C        47    30    15
+C
+C In each case, the load latency, loop control, and extra carry bit handling
+C hide under the multiply latencies.  Those latencies are long enough that
+C we don't need to worry about alignment or pairing to squeeze out
+C performance.
+C
+C For the first limb, some of the loop code is broken out and scheduled back
+C since it can be done earlier.
+C
+C   - The first ldq src[0] is near the start of the routine, for maximum
+C     time from memory.
+C
+C   - The subq y=x-climb can be done without waiting for the inverse.
+C
+C   - The mulq y*inverse is replicated after the final subq for the inverse,
+C     instead of branching to the mulq in the main loop.  On ev4 a branch
+C     there would cost cycles, but we can hide them under the mulq latency.
+C
+C For the last limb, high<divisor is tested and if that's true a subtract
+C and addback is done, as per the main mpn/generic/mode1o.c code.  This is a
+C data-dependent branch, but we're waiting for umulh so any penalty should
+C hide there.  The multiplies saved would be worth the cost anyway.
+C
+C Enhancements:
+C
+C For size==1, a plain division (done bitwise say) might be faster than
+C calculating an inverse, the latter taking about 130 cycles on ev4 or 70 on
+C ev5.  A call to gcc __remqu might be a possibility.
+
+ASM_START()
+PROLOGUE(mpn_modexact_1c_odd,gp)
+
+	C r16	src
+	C r17	size
+	C r18	d
+	C r19	c
+
+	LEA(r0, binvert_limb_table)
+	srl	r18, 1, r20		C d >> 1
+
+	and	r20, 127, r20		C idx = d>>1 & 0x7F
+
+	addq	r0, r20, r21		C table + idx
+
+ifelse(bwx_available_p,1,
+`	ldbu	r20, 0(r21)		C table[idx], inverse 8 bits
+',`
+	ldq_u	r20, 0(r21)		C table[idx] qword
+	extbl	r20, r21, r20		C table[idx], inverse 8 bits
+')
+
+	mull	r20, r20, r7		C i*i
+	addq	r20, r20, r20		C 2*i
+
+	ldq	r2, 0(r16)		C x = s = src[0]
+	lda	r17, -1(r17)		C size--
+	clr	r0			C initial cbit=0
+
+	mull	r7, r18, r7		C i*i*d
+
+	subq	r20, r7, r20		C 2*i-i*i*d, inverse 16 bits
+
+	mull	r20, r20, r7		C i*i
+	addq	r20, r20, r20		C 2*i
+
+	mull	r7, r18, r7		C i*i*d
+
+	subq	r20, r7, r20		C 2*i-i*i*d, inverse 32 bits
+
+	mulq	r20, r20, r7		C i*i
+	addq	r20, r20, r20		C 2*i
+
+	mulq	r7, r18, r7		C i*i*d
+	subq	r2, r19, r3		C y = x - climb
+
+	subq	r20, r7, r20		C inv = 2*i-i*i*d, inverse 64 bits
+
+ASSERT(r7, C should have d*inv==1 mod 2^64
+`	mulq	r18, r20, r7
+	cmpeq	r7, 1, r7')
+
+	mulq	r3, r20, r4		C first q = y * inv
+
+	beq	r17, L(one)		C if size==1
+	br	L(entry)
+
+
+L(top):
+	C r0	cbit
+	C r16	src, incrementing
+	C r17	size, decrementing
+	C r18	d
+	C r19	climb
+	C r20	inv
+
+	ldq	r1, 0(r16)		C s = src[i]
+	subq	r1, r0, r2		C x = s - cbit
+	cmpult	r1, r0, r0		C new cbit = s < cbit
+
+	subq	r2, r19, r3		C y = x - climb
+
+	mulq	r3, r20, r4		C q = y * inv
+L(entry):
+	cmpult	r2, r19, r5		C cbit2 = x < climb
+	addq	r5, r0, r0		C cbit += cbit2
+	lda	r16, 8(r16)		C src++
+	lda	r17, -1(r17)		C size--
+
+	umulh	r4, r18, r19		C climb = q * d
+	bne	r17, L(top)		C while 2 or more limbs left
+
+
+
+	C r0	cbit
+	C r18	d
+	C r19	climb
+	C r20	inv
+
+	ldq	r1, 0(r16)		C s = src[size-1] high limb
+
+	cmpult	r1, r18, r2		C test high<divisor
+	bne	r2, L(skip)		C skip if so
+
+	C can't skip a division, repeat loop code
+
+	subq	r1, r0, r2		C x = s - cbit
+	cmpult	r1, r0, r0		C new cbit = s < cbit
+
+	subq	r2, r19, r3		C y = x - climb
+
+	mulq	r3, r20, r4		C q = y * inv
+L(one):
+	cmpult	r2, r19, r5		C cbit2 = x < climb
+	addq	r5, r0, r0		C cbit += cbit2
+
+	umulh	r4, r18, r19		C climb = q * d
+
+	addq	r19, r0, r0		C return climb + cbit
+	ret	r31, (r26), 1
+
+
+	ALIGN(8)
+L(skip):
+	C with high<divisor, the final step can be just (cbit+climb)-s and
+	C an addback of d if that underflows
+
+	addq	r19, r0, r19		C c = climb + cbit
+
+	subq	r19, r1, r2		C c - s
+	cmpult	r19, r1, r3		C c < s
+
+	addq	r2, r18, r0		C return c-s + divisor
+
+	cmoveq	r3, r2, r0		C return c-s if no underflow
+	ret	r31, (r26), 1
+
+EPILOGUE()
+ASM_END()