# 任务证据索引

本文件是按需读取的历史索引，不是启动上下文。完整日志和大型 JSONL 产物只通过路径、大小和 SHA-256 追溯；不要把它们复制回 `nextTask.md` 或新的 context packet。

当前指针：`nextTask.md`；当前 context：`linuxcnc-2.10.0-pre0-wasm-m1-py-c1`（与 `context-lock.json` 一致）。

## 已验证节点

| 节点 | 结果摘要 | 主要产物 |
|---|---|---|
| `BOOTSTRAP-M0-01` | 基线、下载索引、ABI bootstrap 和上下文包测试通过 | `coverage/source-index.jsonl`, `coverage/manifest.jsonl` |
| `INV-01a..d` | 文档能力、源码符号、配置资源、测试入口索引确定性生成 | `coverage/document-capabilities.jsonl`, `coverage/source-symbols.jsonl`, `coverage/config-resources.jsonl`, `coverage/test-entries.jsonl` |
| `INV-02a..b` | 规范化 source ID、依赖闭包和 unresolved/orphan 报告生成 | `coverage/normalized-sources.jsonl`, `coverage/dependency-closure.jsonl` |
| `INV-03a` | native runner、golden schema 和严格 oracle 通过 | `scripts/native_runner.py`, `coverage/golden-schema.json` |
| `M1-CORE-01` | 最小 protocol、Worker session 和真实 WASM smoke 通过 | `wasm-core/src/sim_protocol.c`, `web/worker/sim-session.mjs` |
| `M1-CORE-02` | 事件容量、回放、快照完整性和序列约束通过 | `wasm-core/src/sim_event.c`, `web/worker/replay.mjs` |
| `M1-FS-01` | workspace journal/recovery prepare/commit/abort 和损坏记录阻断通过 | `web/workspace/journal.mjs`, `web/workspace/recovery.mjs` |
| `M1-RT-01` | runtime error/capability mapping fail-closed 通过 | `web/worker/error-map.mjs`, `web/worker/capabilities.mjs` |
| `M1-RT-02` | 当前最近验证点；报告和脚本单测通过 | `coverage/runtime-mapping.report.json` |
| `M2-CORE-01` | posemath/TP adapter、固定浮点、segment error boundary 和 state hash 通过 | `coverage/posemath-runtime.report.json` |
| `M2-CORE-02` | 固定 ASCII 数值解析、G/M 模态、canonical 输出和失败边界通过 | `coverage/interpreter-runtime.report.json` |
| `M2-CORE-03` | 固定容量 motion queue、连续性、fixed tick 和 canonical state 通过 | `coverage/motion-runtime.report.json` |
| `M2-CORE-04` | blocked：锁定任务声明的 `linuxcnc/unit_tests/kinematics/**` 不存在 | `nextTask.md` |
| `K0-INV-01` | 35 个实现/头文件、262 个去重 KINEMATICS 入口、111 个 HAL/切换入口和 11 个实现族已登记；所有族因官方 unit-test 根缺失显式 blocked | `coverage/kinematics-source-closure.report.json` |
| `K0-INV-02` | 262 个去重后的 KINEMATICS 条目与 111 个 HAL/切换条目闭合为 373 个入口节点、2,774 条边；11 个固定 FK/IK 样本定义全部保留 blocked | `coverage/kinematics-config-graph.report.json`, `coverage/kinematics-oracle-samples.jsonl` |
| `K0-ORACLE-01` | native kinematics smoke 通过；11 个样本严格按 golden schema 输出并因缺失官方 oracle 全部 blocked，无伪造 golden | `coverage/kinematics-oracle.report.json`, `coverage/kinematics-golden-schema.json` |
| `K1-CONTRACT-01` | sim_kinematics ABI、错误码、结构体、导出集合和数值策略生成 contract 并验证；native/WASM/CTest 通过 | `coverage/kinematics-abi-contract.json` |
| `K1-CONTRACT-02` | flags、pose、duplicate-axis、home、limits、axis-to-joint mapping 和 state hash 行为已登记并由 native CTest 覆盖 | `coverage/kinematics-mapping-contract.json` |
| `K1-NUM-01` | 浮点编译、角度单位、迭代上限、容差、exact 字段和六类边界错误已固定 | `coverage/kinematics-numeric-policy.json` |
| `K2-TRIV-01` | trivkins 四种 mode、coordinates case-fold、XYZ/XYZABCUVW、重复轴和 extra-joint 行为已接入现有 slice；245 个真实配置候选已映射，官方 oracle 仍 blocked | `coverage/trivkins-integration.report.json` |
| `K2-TRIV-02` | 明确并实现 kinematics joint 前缀与 extra-joint 分离；重复轴 first-wins、joint_count mismatch、home、limit、state hash native/WASM 回归通过 | `coverage/kinematics-mapping-contract.json`, `wasm-core/tests/sim_kinematics_test.c` |
| `K2-COUPLED-01` | CoreXY、Rose、MaxKins、RotateKins 统一接入；三项 shipped 配置加一个明确标注的 rotatekins 工作区派生候选、FK/IK round-trip、CoreXY HAL/kins 入口区分、Rose quadrant/revolution continuity、Max pivot 和 Rotate 90°边界、native/WASM JSON 与 state hash 对照通过；官方 oracle 继续显式 blocked | `coverage/coupled-kinematics.report.json`, `wasm-core/src/sim_kinematics.c` |
| `K2-HAL-01` | 静态 `corexy_by_hal` 注册到 SimHAL；命令/反馈 8-pin 矩阵、servo tick 调度、alpha/beta 方向、Cartesian home 信号与 `corexykins` 入口区别由 native/WASM 对照通过；官方 oracle 继续显式 blocked | `coverage/corexy-hal.report.json`, `coverage/hal-runtime.report.json`, `wasm-core/src/sim_hal.c` |
| `K3-5AXIS-01` | `5axiskins` 接入统一 XYZBCW spherical pivot 变换；bridgemill 真实配置、`xyzbcwy` 重复 Y 映射、pivot length、FK/IK round-trip、缺必需坐标边界和 native/WASM state hash 对照通过；官方 oracle 继续显式 blocked | `coverage/fiveaxis-kinematics.report.json`, `wasm-core/src/sim_kinematics.c` |
| `K3-TRT-01` | XYZAC/XYZBC TRT 统一接入；table-rotary-tilting 两个真实 `identityfirst` 配置、旋转顺序和 offset 参数、FK/IK round-trip、B=90 奇异边界、native/WASM state hash 对照通过；switchkins 动态切换和官方 oracle 保持后续/blocked | `coverage/trt-kinematics.report.json`, `wasm-core/src/sim_kinematics.c` |
| `K3-ROBOT-01` | SCARA、PUMA、Scorbot 统一接入；scara/puma shipped 配置加 scorbot 工作区派生候选、几何参数、FK/IK 分支 round-trip、不可达/奇异边界和 native/WASM 对照通过；state hash 使用 1e-9 浮点规范化，官方 oracle 继续显式 blocked | `coverage/robot-kinematics.report.json`, `wasm-core/src/sim_kinematics.c` |
| `K3-GENSER-01` | Genser DH 六链 forward 与固定零初值阻尼 Jacobian inverse 接入；melfa/puma560 真实 DH 配置、迭代 residual/iteration、固定上限不收敛、非有限 DH 边界和 native/WASM 对照通过；官方 oracle 继续显式 blocked | `coverage/genser-kinematics.report.json`, `wasm-core/src/sim_kinematics.c` |
| `K4-DELTA-01` | Linear/rotary Delta 统一 forward/inverse/mapping；四个真实配置候选、默认/alternate root、工作空间无解、关节限位、rotary z=0 奇异、固定零迭代和 native/WASM state hash 对照通过；缺失 HAL 资源与官方 oracle 均显式 blocked | `coverage/delta-kinematics.report.json`, `wasm-core/src/sim_kinematics.c`, `scripts/generate_delta_kinematics_report.py` |
| `K4-TRIPOD-01` | Point-vertex tripod 统一 forward/inverse/mapping；真实 `tripod.ini`/`tripodsim.hal`、XYZ/AD-BD-CD 映射、above/below 根分支、无解/基面奇异/限位/退化几何边界、固定零迭代和 native/WASM state hash 对照通过；官方 oracle 因锁定来源缺少 `linuxcnc/unit_tests/kinematics/**` 继续 blocked | `coverage/tripod-kinematics.report.json`, `wasm-core/src/sim_kinematics.c`, `scripts/generate_tripod_kinematics_report.py` |
| `K4-HEX-01` | Genhex 六腿 Stewart 平台统一 forward/inverse/mapping；真实 `hexapod.ini`/`kinematics.hal`、六腿闭式逆解、Newton 6x6 正解、alternate seed、非正 strut、迭代上限、最大误差、奇异 Jacobian、限位、HAL GUI/迭代 pin 和 native/WASM state hash 对照通过；官方 oracle 因锁定来源缺少 `linuxcnc/unit_tests/kinematics/**` 继续 blocked | `coverage/genhex-kinematics.report.json`, `wasm-core/src/sim_kinematics.c`, `scripts/generate_genhex_kinematics_report.py` |
| `K4-PENTA-01` | Pentakins 五腿并联统一 forward/inverse/mapping；真实 `pentapod.ini`/`kinematics.hal` 与派生非零姿态 seed、XYZAB 映射、roll/pitch 约束、tool-offset 双端几何、Newton 5x5 收敛/迭代上限/最大误差/奇异/非正杆长/限位、native/WASM JSON 和 state hash 对照通过；官方 oracle 因锁定来源缺少 `linuxcnc/unit_tests/kinematics/**` 继续 blocked | `coverage/pentapod-kinematics.report.json`, `wasm-core/src/sim_kinematics.c`, `scripts/generate_pentapod_kinematics_report.py` |
| `K5-SWITCH-01` | switchkins 三槽位动态切换；真实 `xyzac-trt.ini`/`identityfirst` 配置、identity/xyzac-trt/userk 注册、pose 连续、状态保持、非法模式/缺模块/切换中断/abort 边界、native/WASM runner 与 state hash 对照通过；官方 oracle 因锁定来源缺少 `linuxcnc/unit_tests/kinematics/**` 继续显式 blocked | `coverage/switchkins-kinematics.report.json`, `wasm-core/src/sim_switchkins.c`, `wasm-core/tests/sim_switchkins_test.c` |
| `K5-USER-01` | userk identity 模板与 ugenser/genser 构建期静态描述符；ABI v1、forward/inverse/static capability、switchkins type 2 绑定、FK/IK 调用状态、路径/`.so` 禁止、版本/能力/缺模块边界和 native/WASM state hash 对照通过；旧 ugenser CLI 明确排除，官方 oracle 继续 blocked | `coverage/userkins-kinematics.report.json`, `wasm-core/src/sim_userkins.c`, `wasm-core/tests/sim_userkins_test.c` |
| `K5-CFG-01` | 18 个内建运动学类型的 ABI v1 构建期注册表；稳定名称/type、必需坐标、关节范围、7 类能力位、8 类参数掩码、18/18 实际 init、能力/参数/type/坐标/关节/未知/路径错误和 native/WASM registry hash 对照通过；官方 oracle 继续 blocked | `coverage/kinematics-registry.report.json`, `wasm-core/src/sim_kinematics_registry.c`, `wasm-core/tests/sim_kinematics_registry_test.c` |
| `K6-MOTION-01` | 固定 tick TP→IK→motion adapter；复用 `sim_tp` 和 `sim_kinematics_inverse_ex`，64 槽关节样本队列、pause/resume、IK 奇异、非有限、容量满、planner/kinematics 事务回滚、native/WASM JSON 和 state hash 对照通过；官方 oracle 继续 blocked | `coverage/kinematics-motion.report.json`, `wasm-core/src/sim_kinematics_motion.c`, `wasm-core/tests/sim_kinematics_motion_test.c` |
| `K6-MOTION-02` | actual-joint→FK feedback adapter；pose/joint/flags/tick/valid/error 状态、stale/nonfinite/joint-count/unsupported-forward 边界、错误时不覆盖有效 pose、native/WASM JSON 和 state hash 对照通过；官方 oracle 继续 blocked | `coverage/kinematics-feedback.report.json`, `wasm-core/src/sim_kinematics_feedback.c`, `wasm-core/tests/sim_kinematics_feedback_test.c` |
| `K6-HOME-01` | fixed home sequence、`sim_kinematics_home`、joint limit/FK check；未 home、非法 sequence、越界、非有限、joint-count、失败保持有效 pose/joints、native/WASM JSON 和 state hash 对照通过；官方 oracle 继续 blocked | `coverage/kinematics-home-limit.report.json`, `wasm-core/src/sim_kinematics_home_limit.c`, `wasm-core/tests/sim_kinematics_home_limit_test.c` |
| `K6-IO-01` | 固定 tick spindle/tool/probe IO；motion/iocontrol pins、主轴限速/到速/定向、prepare/change/abort/fault、probe pose latch、停主轴互锁、非法 pin/超限/未 ready/急停/恢复边界和 native/WASM JSON/hash 对照通过；官方 IO/kinematics oracle 继续 blocked | `coverage/io-runtime.report.json`, `wasm-core/include/sim_io.h`, `wasm-core/src/sim_io.c`, `wasm-core/tests/sim_io_test.c` |

| `K7-RECOVERY-01` | 固定 tick checkpoint/replay 与 workspace recovery 已接入；checkpoint 携带 context、cursor、snapshot/state hash 和 operation ledger；损坏 checkpoint、未知 schema、缺号/重复事件、未确认操作、abort 和恢复边界均 fail-closed；恢复终点与连续运行状态 hash 一致；native `sim_event_import` 与 Worker 对照通过，官方 recovery oracle 继续显式 blocked | `coverage/workspace-recovery.report.json`, `web/worker/replay.mjs`, `web/worker/sim-session.mjs`, `web/workspace/recovery.mjs`, `wasm-core/src/sim_event.c` |
| `K8-REG-01` | 统一配置图确定性枚举 264 个运动学入口和 233 个 sim INI 入口；逐项资源/INI/注册表启动预检、缺失与未解析引用保留；图谱孤儿和未拥有模板为零；native/WASM kinematics/motion/feedback/home/IO 与 Worker replay/recovery 重复摘要稳定；官方 kinematics/recovery oracle 继续显式 blocked | `coverage/configuration-regression.report.json`, `scripts/generate_configuration_regression.py`, `scripts/test_configuration_regression.py`, `coverage/manifest.jsonl`, `context-lock.json` |
| `K8-REL-01` | 兼容性、来源/许可证和发布闭合审计完成；ABI/protocol/schema/context lock 哈希一致；1,804 个已影响 manifest 条目在 evidence index 中保留 owner、输入、输出、测试、差异和 oracle 状态；6,249 个未分配种子、资源缺失、官方 oracle、浏览器矩阵、逐项许可证和迁移/回滚继续显式 blocked，不升级为发布候选 | `coverage/release-closure.report.json`, `coverage/compatibility-matrix.report.json`, `coverage/license-closure.report.json`, `coverage/release-evidence-index.json`, `docs/linuxcnc-web-wasm-release-closure.md`, `scripts/generate_release_closure.py`, `scripts/test_release_closure.py` |
| `K8-REL-02` | workspace-package v1↔v2 封套迁移双向 hash 闭合；旧 event/snapshot/checkpoint/journal schema 保持不变且损坏、版本、上下文不兼容均 fail-closed；回滚包只生成新目标包，失败注入后恢复到最近已提交 seq=1；离线资源完整缓存 ready、缺件阻断、联网降级显式；迁移项在 release evidence index 标记 verified，K8-REL-01 的官方 oracle/资源/浏览器/许可证阻塞保留 | `coverage/workspace-migration.report.json`, `coverage/workspace-rollback.package.json`, `coverage/offline-cache.package.json`, `web/workspace/migration.mjs`, `web/workspace/test_migration.mjs`, `coverage/release-evidence-index.json`, `coverage/compatibility-matrix.report.json` |
| `K8-REL-03` | 生成 8,053 条确定性 license/source index；全部来源 hash、审计责任人和证据状态完整；7,996 条 LinuxCNC 条目按最具体 Debian copyright scope 映射 SPDX，57 条 wasm-core/web 条目明确保持 `blocked_unassigned`；实现许可证决策写入独立文档，release 仍保留实现许可证阻塞，不升级为发布候选 | `coverage/license-source-index.jsonl`, `coverage/license-closure.report.json`, `docs/linuxcnc-web-wasm-license-decision.md`, `coverage/release-evidence-index.json`, `scripts/test_license_source_closure.py` |
| `K8-REL-04` | 最终 release-candidate gate 独立汇总 closure 报告、context lock、schema contracts、license/source index、恢复和迁移证据；context/recovery hash、ABI/protocol/schema、license index、migration/rollback/offline checks verified；6 个硬阻塞保留，明确 `candidate_eligible=false`、`release_action=STOP_RELEASE`，不升级为发布候选 | `coverage/release-candidate-gate.report.json`, `coverage/release-closure.report.json`, `scripts/generate_release_closure.py`, `scripts/test_release_candidate_gate.py` |
| `K8-REL-05` | post-release audit 逐项比较 gate 的 11 个输入哈希、closure 交叉引用和 context/schema/recovery/migration 检查；审计检查全部 verified，6 个 blocker 均有 owner、review owner、证据路径和 remediation；整体仍明确 `blocked`/`STOP_RELEASE`，未清除或重分类阻塞 | `coverage/post-release-audit.report.json`, `scripts/generate_post_release_audit.py`, `scripts/test_post_release_audit.py` |
| `K8-REL-06` | K8 milestone closeout 冻结 post-release audit、release gate、closure、evidence index 和 context lock；输入哈希、审计自校验、context/schema、六项 blocker 保留和 `STOP_RELEASE` 均 verified；里程碑以 `closed_with_release_blockers` 结束，不升级为发布候选 | `coverage/k8-milestone-closeout.report.json`, `scripts/generate_k8_milestone_closeout.py`, `scripts/test_k8_milestone_closeout.py`, `coverage/post-release-audit.report.json` |
| `K8-REL-07` | remediation intake 校验 closeout、audit、gate、closure、evidence index 和 context lock 的输入哈希与 context；六个 blocker identity、owner/evidence/review trigger 和 `STOP_RELEASE` 均 verified；生成 `K8-REL-08..13` 有序后续工作项，但全部保持 blocked，不升级为发布候选 | `coverage/release-remediation-intake.report.json`, `scripts/generate_release_remediation_intake.py`, `scripts/test_release_remediation_intake.py`, `docs/linuxcnc-web-wasm-release-remediation-intake.md` |
| `K8-REL-08` | 为全部 6,249 个 `needs_owner` manifest seed 生成确定性 WS-0/WS-1/WS-2/WS-6 workstream owner 和 review owner；源哈希、唯一覆盖、context 与 `STOP_RELEASE` 均 verified；assignment 保持 `proposed_blocked_review`，不修改 manifest/context lock、不升级 accepted，下一步处理 acceptance evidence | `coverage/manifest-ownership-remediation.report.json`, `scripts/generate_manifest_ownership_remediation.py`, `scripts/test_manifest_ownership_remediation.py`, `docs/linuxcnc-web-wasm-manifest-ownership-remediation.md` |
| `K8-REL-09` | acceptance readiness 审计覆盖全部 1,804 affected entry；owner/inputs/outputs/test 字段虽可追踪，但 oracle/context 阻塞导致 eligible=0，manifest accepted=0；6 项检查与 `STOP_RELEASE` verified，不 promotion 或重分类，下一步处理 official oracle | `coverage/release-acceptance-remediation.report.json`, `scripts/generate_release_acceptance_remediation.py`, `scripts/test_release_acceptance_remediation.py`, `docs/linuxcnc-web-wasm-release-acceptance-remediation.md` |
| `K8-REL-10` | 锁定 source commit 与 context 匹配；`linuxcnc/unit_tests/kinematics`、recovery roots 缺失，6 个 matrixkins 文件明确非官方，11 个 kinematics samples/recovery scenarios 保持 blocked；未新增官方输入或 golden，`STOP_RELEASE` verified，下一步处理 configuration resources | `coverage/official-oracle-remediation.report.json`, `scripts/generate_official_oracle_remediation.py`, `scripts/test_official_oracle_remediation.py`, `docs/linuxcnc-web-wasm-official-oracle-remediation.md` |
| `K8-REL-11` | 配置资源 remediation 保留 16,093 rows：997 missing、91 unresolved、59 unindexed、3 unregistered startup；956 basename candidates 仅作只读审查，实际 resolve=0，资源图 orphan=0，`STOP_RELEASE` verified，下一步处理 browser matrix | `coverage/configuration-resource-remediation.report.json`, `scripts/generate_configuration_resource_remediation.py`, `scripts/test_configuration_resource_remediation.py`, `docs/linuxcnc-web-wasm-configuration-resource-remediation.md` |
| `K8-REL-12` | browser matrix remediation 读取锁定 TBD minimums；Chromium 151/Firefox 154 headless smoke passed，Safari 在 Linux 环境 unavailable，时间戳输出归一化且所有结果显式；`STOP_RELEASE` verified，不就地修改 context lock，下一步处理 implementation license | `coverage/browser-matrix-remediation.report.json`, `scripts/generate_browser_matrix_remediation.py`, `scripts/test_browser_matrix_remediation.py`, `docs/linuxcnc-web-wasm-browser-matrix-remediation.md` |
| `K8-REL-13` | implementation license remediation 覆盖 57/57 wasm-core/web entries；源哈希与 audit evidence verified，blocked_unassigned=57、approved_spdx=0、未批准声明=0，上游 license 不继承，`STOP_RELEASE` verified，下一步汇总 remediation evidence | `coverage/implementation-license-remediation.report.json`, `scripts/generate_implementation_license_remediation.py`, `scripts/test_implementation_license_remediation.py`, `docs/linuxcnc-web-wasm-implementation-license-remediation.md` |
| `K8-REL-14` | remediation evidence roundup 汇总 K8-REL-08..13；6 份报告 self-hash/context、六个 blocker identity、无 promotion/fabrication 和 gate/audit/closeout/intake 的 `STOP_RELEASE` 均 verified；状态为 `blocked_pending_owner_actions`，下一步 owner review 与新 context/gate refresh | `coverage/remediation-evidence-roundup.report.json`, `scripts/generate_remediation_evidence_roundup.py`, `scripts/test_remediation_evidence_roundup.py`, `docs/linuxcnc-web-wasm-remediation-evidence-roundup.md` |
| `K8-REL-15` | owner-review gate refresh 定位六项 owner decision，但 workspace 没有批准输入或新 context；owner_inputs=0、gate_refresh=blocked，`STOP_RELEASE` verified，任务保持 blocked，后续仅在 owner 决策后创建新 context 并刷新 gate | `coverage/owner-review-gate-refresh.report.json`, `scripts/generate_owner_review_gate_refresh.py`, `scripts/test_owner_review_gate_refresh.py`, `docs/linuxcnc-web-wasm-owner-review-gate-refresh.md` |
| `K8-REL-16` | 在没有 owner 决定或新锁定输入时重建 closure/audit/remediation/owner-review 证据；六项 blocker identity、context consistency 和 `STOP_RELEASE` 均 verified，owner_inputs=0、gate_refresh=blocked，context lock 未修改，任务保持 blocked | `coverage/owner-review-gate-refresh.report.json`, `coverage/release-candidate-gate.report.json`, `coverage/post-release-audit.report.json`, `scripts/generate_owner_review_gate_refresh.py`, `scripts/test_owner_review_gate_refresh.py` |
| `PROJECT-AUDIT-01` | 整体审计确认 K0-K6 运动学实现和 15 项 native CTest 已通过；运动学 `partial/blocked` 仅因锁定来源缺少官方 oracle；当前开发瓶颈转为配置启动闭包，下一任务为 M3-CFG-01，K8 release 六项 blocker/`STOP_RELEASE` 独立保留 | `docs/linuxcnc-web-wasm-next-work.md`, `coverage/kinematics-registry.report.json`, `coverage/kinematics-motion.report.json`, `coverage/kinematics-feedback.report.json`, `coverage/kinematics-home-limit.report.json`, `coverage/configuration-regression.report.json` |
| `PROJECT-AUDIT-02` | 重新梳理任务图确认 M3/FE/REG 实现证据均已 verified；K8-REL-17 owner_inputs=0、gate_refresh=blocked，发现旧 Next 自引用风险；生成 GOV-01 readiness 后进入不自动重试的 WAIT-OWNER-01，六项 blocker 和 `STOP_RELEASE` 保持 verified | `docs/linuxcnc-web-wasm-task-map.md`, `coverage/project-task-readiness.report.json`, `nextTask.md` |
| `OWNER-INTAKE-01` | 建立六项 owner decision 输入模板、结构/identity/context/evidence hash 验证器和 blocked report；当前输入文件缺失，验证结果为 blocked，gate refresh 永远 blocked，不修改 context lock 或 release gate | `coverage/owner-decision-intake.template.json`, `coverage/owner-decision-intake.report.json`, `docs/linuxcnc-web-wasm-owner-decision-intake.md`, `scripts/validate_owner_decision_intake.py`, `scripts/test_owner_decision_intake.py` |
| `GOV-INTAKE-01` | 强化 owner decision intake 的持续接续门禁；非 approve、缺少 decision_set_id、仓库外/缺失证据路径、非十六进制或实际 hash 不匹配均 fail-closed；当前 owner 输入仍缺失，release gate 和 context lock 未修改 | `scripts/validate_owner_decision_intake.py`, `scripts/test_owner_decision_intake.py`, `docs/linuxcnc-web-wasm-continuation-plan.md` |
| `M3-CFG-01` | 确定性配置 resolver 和 Worker preflight 完成；16,093 条资源全部分类，15,112 resolved、981 blocked；显式 `LIB:`、参数尾缀、相对路径、仓库外路径和宿主路径均有明确策略；原始索引 hash、context lock、187 个脚本测试、15 个 native CTest 和 Worker/workspace 测试通过 | `web/workspace/configuration.mjs`, `web/worker/sim-session.mjs`, `coverage/configuration-startup-closure.report.json`, `scripts/generate_configuration_startup_closure.py`, `scripts/test_configuration_startup_closure.py`, `web/workspace/test_configuration.mjs`, `web/worker/test_configuration_preflight.mjs` |
| `M3-RT-02` | 生成 145 个 `.comp` 组件 manifest、1,220 pins、140 params、530 functions 和 193 个 HAL 文件的 4,566 条配置图记录；manifest、容量、资源边和动态加载拒绝检查 verified，29 个 `loadusr` 与 124 个变量化/未声明 `loadrt` 保持 blocked；190 个脚本测试、15 个 native CTest 和 Worker/workspace 测试通过 | `coverage/hal-component-manifest.report.json`, `scripts/generate_hal_component_manifest.py`, `scripts/test_hal_component_manifest.py`, `web/workspace/hal-configuration.mjs`, `web/worker/sim-session.mjs`, `web/worker/test_hal_preflight.mjs` |
| `M3-RT-03` | 虚拟设备故障矩阵完成；26 个 spindle/tool/probe/limit/estop/非有限/恢复场景进入 EventLog，连续执行与 replay state hash 一致，设备 checkpoint 增量恢复通过；192 个脚本测试、15 个 native CTest 和 Worker/workspace 测试通过 | `coverage/virtual-device-fault-matrix.report.json`, `scripts/generate_virtual_device_fault_matrix.py`, `scripts/test_virtual_device_fault_matrix.py`, `web/worker/virtual-devices.mjs`, `web/worker/test_virtual_devices.mjs`, `web/worker/test_device_recovery.mjs` |
| `M3-FS-01` | 配置/HAL/虚拟设备/session 状态统一到 checkpoint；设备事件增量恢复后 session state hash 一致，workspace package v1↔v2 round-trip 通过；194 个脚本测试、15 个 native CTest 和 Worker/workspace 测试通过 | `coverage/workspace-session-integration.report.json`, `scripts/generate_workspace_session_integration.py`, `scripts/test_workspace_session_integration.py`, `web/worker/test_workspace_session_integration.mjs`, `web/worker/sim-session.mjs` |
| `M3-PY-01` | Worker-only Python bridge 完成；固定 Pyodide manifest/artifact hash、虚拟模块 import、能力拒绝、Python API 调用、异常/资源限制和 Python session checkpoint/replay 均通过；196 个脚本测试、15 个 native CTest 和 Worker/workspace 测试通过 | `coverage/python-worker-bridge.report.json`, `scripts/generate_python_worker_bridge.py`, `scripts/test_python_worker_bridge.py`, `web/worker/python-bridge.mjs`, `web/worker/test_python_bridge.mjs`, `web/worker/test_python_session.mjs` |
| `FE-M1` | 建立真实 WorkerClient/AppShell；capabilities、session attach、workspace load、step、snapshot、error 和 operation 去重 smoke 通过；198 个脚本测试、15 个 native CTest 和 Worker/workspace/Python 回归通过 | `coverage/frontend-m1.report.json`, `scripts/generate_frontend_m1.py`, `scripts/test_frontend_m1.py`, `web/app/index.html`, `web/app/app.mjs`, `web/app/worker-client.mjs`, `web/app/test_frontend_m1.mjs` |
| `FE-M2` | 完成核心 operation controls 和权威 state panel；run/pause/resume/abort/home/estop/recover 控制、operation 去重、错误/报警状态和窄屏布局 smoke 通过；200 个脚本测试、15 个 native CTest 和 Worker/workspace/Python 回归通过 | `coverage/frontend-m2.report.json`, `scripts/generate_frontend_m2.py`, `scripts/test_frontend_m2.py`, `web/app/controls.mjs`, `web/app/state-panel.mjs`, `web/app/test_frontend_m2.mjs` |
| `FE-M3` | 项目/恢复 workflow 完成；journal 导入导出、checkpoint/package、v1↔v2 migration、offline ready 和 half-commit 状态展示 smoke 通过；202 个脚本测试、15 个 native CTest 和 Worker/workspace/Python 回归通过 | `coverage/frontend-m3.report.json`, `scripts/generate_frontend_m3.py`, `scripts/test_frontend_m3.py`, `web/app/project-workflow.mjs`, `web/app/recovery-panel.mjs`, `web/app/test_frontend_m3.mjs` |
| `FE-M4` | 完成 HAL/tool/IO/3D frontend workflows；设备命令、HAL diagnostics、稳定 canvas machine view 和故障状态展示 smoke 通过；204 个脚本测试、15 个 native CTest 和 Worker/workspace/Python 回归通过 | `coverage/frontend-m4.report.json`, `scripts/generate_frontend_m4.py`, `scripts/test_frontend_m4.py`, `web/app/device-panel.mjs`, `web/app/hal-panel.mjs`, `web/app/machine-view.mjs`, `web/app/test_frontend_m4.mjs` |
| `S5-02` | 真实 LinuxCNC `runtests` 代表性纯仿真基线 12/12 native 通过；abort/G64 超时不伪造为回归通过，明确保留 Worker Task/motion 适配边界 | `coverage/linuxcnc-source-test-execution-s5.report.json`, `scripts/test_linuxcnc_source_test_execution.py` |
| `S5-03` | `unit_tests/interp` 与 `unit_tests/tp` 的 9 个可移植源断言由同一 native/WASM adapter 执行，CTest 通过且 JSON golden 字节一致；上游 Meson oracle 缺失标记 `SOURCE_BLOCKED`，G64/abort 保持 `WORKER_TASK_MOTION_PENDING` | `coverage/linuxcnc-source-unit-execution-s5.report.json`, `wasm-core/tests/source_unit_adapter_test.c`, `scripts/test_linuxcnc_source_unit_s5.py` |
| `S5-04` | `tests/interp`、`tests/oword` 与 `tests/remap` 的 8 个真实 fixture 由 WASM-backed Worker 执行；6 项 block/error/canonical/callback 适配通过，DO/G64 2 项明确保持 `WORKER_TASK_MOTION_PENDING`，26 个源/expected/checkresult/config 文件哈希闭合；源 canonical logger 继续 `SOURCE_BLOCKED` | `coverage/linuxcnc-source-interp-s5.report.json`, `web/worker/test_source_interpreter_s5.mjs`, `scripts/test_linuxcnc_source_interpreter_s5.py` |
| `S5-05` | HAL `abs`/`edge` 与 starting-high 边界由 Worker 静态运行时执行通过；native/WASM `sim_hal_test` golden 字节一致；自定义 `.comp`、相对头文件和 userspace/RTAPI 路径分别保留 `SOURCE_BLOCKED`/`HOST_EXCLUDED`，8 个源案例和 23 个 fixture 文件均有哈希 | `coverage/linuxcnc-source-hal-s5.report.json`, `web/worker/test_source_hal_s5.mjs`, `scripts/test_linuxcnc_source_hal_s5.py` |
| `S5-06` | IO/limit/tool ack Worker 适配 3 项通过；native/WASM `sim_io` 与 `sim_device_io` golden 字节一致；startup tool table 2 项 `SOURCE_BLOCKED`、ClassicLadder 1 项 `HOST_EXCLUDED`、motion-logger abort 1 项 `WORKER_TASK_MOTION_PENDING`，30 个 fixture 文件哈希闭合 | `coverage/linuxcnc-source-io-s5.report.json`, `web/worker/test_source_io_s5.mjs`, `scripts/test_linuxcnc_source_io_s5.py` |
| `S5-07` | 批量读取并哈希全部 264 个配置矩阵条目（216 个 `configs/sim`、48 个 tests 配置）；56 READY、208 BLOCKED，逐项保留资源/诊断状态；batch checkpoint/restore、native/WASM/Worker startup probes 通过，静态 preflight 不提升为官方 runtime oracle | `coverage/linuxcnc-source-config-s5.report.json`, `web/worker/test_source_config_s5.mjs`, `scripts/test_linuxcnc_source_config_s5.py` |
| `S5-08` | 汇总 S5-01..S5-07 源证据；关键适配器重复运行稳定，native/WASM 静态 golden 全部一致，1x/fast/recovery/trace import 终点一致且 `first_divergence=null`；SOURCE_BLOCKED/HOST_EXCLUDED/WORKER_TASK_MOTION_PENDING 与官方 oracle 阻塞均保留 | `coverage/linuxcnc-source-parity-s5.report.json`, `web/worker/test_source_parity_s5.mjs`, `scripts/test_linuxcnc_source_parity_s5.py` |
| `S6-01` | 对完整仿真计划 P0-P8 的 39 个任务逐项对齐证据；S5 源测试链全部 verified；识别 authoritative sim_task tick integration、官方 native oracle、配置资源、source adapter 和浏览器/OPFS 五类开放 gap；创建下一执行任务 S6-02 | `coverage/full-linuxcnc-simulation-gap-audit.report.json`, `scripts/generate_full_linuxcnc_simulation_gap_audit.py`, `scripts/test_full_linuxcnc_simulation_gap_audit.py`, `nextTask1.md` |
| `S6-02` | 新增 authoritative runtime：程序行在 task phase 执行，XYZ/trivkins planner 在 tp/kinematics phase 更新，motion/HAL/IO 共用固定 tick；state 纳入 snapshot/checkpoint/trace/endpoint，1x/fast、recovery/trace import parity 通过；非 trivkins和完整 canonical oracle 保持后续/blocked | `coverage/authoritative-sim-task-s6.report.json`, `web/worker/authoritative-runtime.mjs`, `web/worker/test_authoritative_sim_task_s6.mjs`, `scripts/test_authoritative_sim_task_s6.py` |
| `S6-03` | authoritative runtime 扩展 CoreXY：XYZ pose `[4,2,3]` 映射到 joints `[6,2,3]`；native/WASM kinematics 与 kinematics-motion golden、1x/fast/recovery endpoint parity 通过；unsupported `puma` 稳定拒绝，其他 families 和官方 oracle 保留后续/blocked | `coverage/authoritative-kinematics-s6.report.json`, `web/worker/test_authoritative_kinematics_s6.mjs`, `scripts/test_authoritative_kinematics_s6.py` |
| `S6-04` | authoritative runtime 接入一个可验证的并联 Tripod family：真实 `tripodkins` 配置/几何 `[0,0],[10,0],[5,7.071]`，pose `[2,3,4]` 逆映射为三支杆 `[5.385164807,9.433981132,6.447715952]`；native/WASM kinematics 与 kinematics-motion golden、1x/fast/recovery endpoint parity 和首差诊断通过；TRT、机器人、Delta/Hexapod/Pentapod、switch/user 与官方 oracle 明确保留 queued/blocked | `coverage/authoritative-kinematics-s6-04.report.json`, `web/worker/test_authoritative_kinematics_s6_04.mjs`, `scripts/test_authoritative_kinematics_s6_04.py`, `web/worker/authoritative-runtime.mjs` |
| `S6-05` | 新增 OPFS Dedicated Worker 探针、逻辑 journal/offline integrity 测试和确定性报告；Playwright headed Chromium 140 两次完成 sync-access-handle 写入/读取/清理并稳定一致，headless timeout 作为边界保留；Safari/Firefox 明确 OUT_OF_SCOPE，物理 crash/restart oracle 和 release/oracle blocker 不被升级为闭合 | `coverage/authoritative-browser-s6-05.report.json`, `web/workspace/opfs-runtime.mjs`, `scripts/test_browser_opfs_playwright_s6_05.mjs`, `web/app/test_opfs_runtime_s6_05.mjs`, `scripts/test_authoritative_browser_s6_05.py` |
| `S6-06` | 使用同一 headed Chromium 140 persistent profile：第一阶段提交 OPFS record 后关闭 browser context，第二阶段重开 profile 读取相同 content hash 并清理；两次运行稳定，profile restart slice verified；真实进程 crash/power-loss oracle 和 release blocker 保留，Safari/Firefox 明确 OUT_OF_SCOPE | `coverage/authoritative-browser-restart-s6-06.report.json`, `scripts/test_browser_opfs_restart_s6_06.mjs`, `scripts/test_authoritative_browser_restart_s6_06.py`, `web/workspace/opfs-runtime.mjs` |
| `S6-07` | 使用 Playwright BrowserServer kill 真实终止 Chromium 进程，再以同一 profile 重开并读取 committed OPFS record；两次运行 process-kill、hash continuity 和 cleanup 均 verified；power-loss/filesystem-corruption 与 release/oracle blocker 保留，Safari/Firefox 明确 OUT_OF_SCOPE | `coverage/authoritative-browser-crash-s6-07.report.json`, `scripts/test_browser_opfs_crash_s6_07.mjs`, `scripts/test_authoritative_browser_crash_s6_07.py`, `web/workspace/opfs-runtime.mjs` |
| `S7-AUDIT` | 重新梳理 LinuxCNC 完整仿真计划、264 配置入口、S5 source parity、S6 authoritative/runtime/browser evidence；确认配置 `56 READY/208 BLOCKED`、DO/ENDDO 与 G64/G61 pending、剩余 kinematics queued、官方 oracle/release blocked；创建并认领 S7-01 | `coverage/simulation-alignment-s7.report.json`, `scripts/generate_simulation_alignment_audit_s7.py`, `scripts/test_simulation_alignment_s7.py` |
| `S7-01` | 接入锁定 `linuxcnc/tests/interp/do-while-break/test.ngc` 的 DO/ENDDO/BREAK 后测循环 slice；嵌套 BREAK、named parameters、pause/resume、malformed ENDDO、depth budget 和 checkpoint recovery parity 通过；上游 canonical expected 保持 `SOURCE_BLOCKED` | `coverage/source-do-s7-01.report.json`, `web/worker/test_source_do_s7_01.mjs`, `scripts/test_source_do_s7_01.py`, `web/worker/program-runner.mjs`, `web/worker/sim-session.mjs` |
| `S7-02` | 接入锁定 `linuxcnc/tests/interp/g6164/test.ngc` 的 G64 continuous/P/Q、G61 exact-path、G61.1 exact-stop modal state；负 tolerance/unsupported code、pause/recovery parity 通过；S5-04 pending 清零，canonical logger 与 TP numeric parity 仍保持明确边界 | `coverage/source-g6164-s7-02.report.json`, `web/worker/test_source_g6164_s7_02.mjs`, `scripts/test_source_g6164_s7_02.py`, `web/worker/program-runner.mjs`, `web/worker/sim-session.mjs` |
| `S7-03` | 选择有真实配置/native-WASM 样本且保持 XYZ/3-joint 形状的 `lineardeltakins`，接入 authoritative fixed tick；pose `[0,0,64.636584194]` 映射三 carriage joints `[300,300,300]`，1x/fast/recovery parity、无解 fail-closed 和 unsupported TRT boundary 通过 | `coverage/authoritative-kinematics-s7-03.report.json`, `web/worker/test_authoritative_kinematics_s7_03.mjs`, `scripts/test_authoritative_kinematics_s7_03.py`, `web/worker/authoritative-runtime.mjs` |
| `S7-04` | 接入 `rotarydeltakins` authoritative fixed tick；pose `[0,0,-3.793360169]` 映射 rotary joints `[10,10,10]`，1x/fast/recovery parity、z=0 singular fail-closed 和 unsupported TRT boundary 通过；缺失 rdelta HAL 与官方 oracle 保持边界 | `coverage/authoritative-kinematics-s7-04.report.json`, `web/worker/test_authoritative_kinematics_s7_04.mjs`, `scripts/test_authoritative_kinematics_s7_04.py`, `web/worker/authoritative-runtime.mjs` |
| `S7-05` | 对齐真实 `corexy_by_kins.ini` 的 LinuxCNC `#INCLUDE`、HAL 变量和反斜杠续行；HAL 72 条 preflight records 全部 ready，但 runtime 正确 BLOCKED 在缺失 `linuxcnc.var/tool.tbl`，未提升 static READY | `coverage/configuration-corexy-s7-05.report.json`, `web/worker/test_configuration_corexy_s7_05.mjs`, `scripts/test_configuration_corexy_s7_05.py`, `web/workspace/ini-parser.mjs`, `web/workspace/hal-configuration.mjs`, `web/workspace/configuration-startup.mjs` |
| `S7-06` | verified：依据 `stepconf/build_INI.py` 的精确 `INTRO_GRAPHIC = linuxcnc.gif` 约定，将 `linuxcnc/linuxcnc.gif` 作为 DISPLAY-only shared simulation asset；同 basename 的 tool/parameter/HAL/program 和非 DISPLAY 键保持 blocked；资源图 state hash、source fixture、self-hash 和 native/Worker/App 全量回归通过。S7 后续技术任务未定义，指针保持 `next_task: none` | `coverage/resource-intro-graphic-s7-06.report.json`, `web/worker/test_resource_intro_graphic_s7_06.mjs`, `scripts/test_resource_intro_graphic_s7_06.py`, `web/workspace/resource-resolver.mjs`, `nextTask1.md` |
| `S8-01` | verified：从真实 `linuxcnc/configs/sim` 生成 235 个 INI 案例和 2,080 个精确文件索引；递归 INI/HAL/resource loader 保留缺失诊断并把 static READY 与 runtime READY 分开；AppShell 提供案例筛选、Worker startup、G-code、MDI、Run/Pause/Step、Home/Jog、倍率、主轴/刀具/探针/急停和 machine view。235 个案例中 4 个 loader-ready、其余保留实际资源/HAL blockers | `coverage/sim-case-catalog.report.json`, `scripts/generate_sim_case_catalog.py`, `scripts/test_sim_case_catalog.py`, `web/workspace/sim-case-catalog.mjs`, `web/workspace/sim-case-loader.mjs`, `web/workspace/test_sim_case_loader.mjs`, `web/app/app.mjs`, `web/app/styles.css` |
| `S8-02` | verified：用户授权从真实 LinuxCNC 仿真执行复制 runtime fixtures；`minimal_xyz` 的 `sim.var`/生成 HAL 和 CoreXY 的 `linuxcnc.var`/`tool.tbl` 均 exact-path hash-lock；预加载 `corexykins/motmod/pid/stepgen` 与虚拟 `hal_manualtoolchange` 适配通过，两个案例 Worker startup 均达到 `TASK_READY`，未知 `loadusr` 仍 blocked | `coverage/sim-case-startup-s8-02.report.json`, `web/worker/test_sim_case_startup_s8_02.mjs`, `scripts/generate_sim_case_startup_s8_02.py`, `scripts/test_sim_case_startup_s8_02.py`, `web/workspace/hal-configuration.mjs`, `web/workspace/sim-case-loader.mjs` |
| `S8-03` | verified：真实执行 `xz.ini`、`xz_both.ini`、`xz_both_auto.ini` 取得 `xz.var` 和三份生成 HAL fixture；同案例 `xz.tbl` 精确复用；三案 Worker startup 均 `TASK_READY`、HAL blocked_count=0，identity/BOTH/AUTO state hash 分别保留 | `coverage/sim-case-batch-s8-03.report.json`, `web/worker/test_sim_case_batch_s8_03.mjs`, `scripts/generate_sim_case_batch_s8_03.py`, `scripts/test_sim_case_batch_s8_03.py` |
| `S8-04` | verified：minimal_xyz 真实 fixture 达到 TASK_READY；固定 tick 覆盖 Home/Jog/override、G-code Run/Pause/Resume/Abort/Restart、MDI、estop/recover 和 checkpoint recovery endpoint parity；前端 AppShell/state panel/machine view 继续消费 Worker 权威状态 | `coverage/minimal-xyz-vertical-s8-04.report.json`, `web/worker/test_minimal_xyz_vertical_s8_04.mjs`, `scripts/generate_minimal_xyz_vertical_s8_04.py`, `scripts/test_minimal_xyz_vertical_s8_04.py` |
| `S8-05` | verified：`corexy_by_kins.ini` 与 `corexy_by_hal.ini` 均使用真实 fixtures 达到 TASK_READY；同一 pose `[4,2,3]` 映射 joints `[6,2,3]`，HAL records 72/100，1x/fast/recovery parity 均通过；kins path 与 HAL-trivkins transform path 保持明确区分，未知 HAL 命令仍 fail-closed | `coverage/corexy-dual-path-s8-05.report.json`, `web/worker/test_corexy_dual_path_s8_05.mjs`, `scripts/generate_corexy_dual_path_s8_05.py`, `scripts/test_corexy_dual_path_s8_05.py`, `web/workspace/hal-configuration.mjs` |
| `S8-06` | verified：235 个真实 `configs/sim` 案例全部执行 exact-path loader/startup 两次；按 LinuxCNC source 语义处理 optional `DISPLAY/OPEN_FILE`、缺失 HALFILE 分类和真实路径；分类为 TASK_READY=96、BLOCKED_RESOURCE=11、BLOCKED_HAL=106、BLOCKED_INI=19、BLOCKED_STARTUP=3；每案保留 fixture、missing、first diagnostic、resource/HAL counts 和 deterministic state hash | `coverage/sim-case-matrix-s8-06.report.json`, `web/worker/test_sim_case_matrix_s8_06.mjs`, `scripts/generate_sim_case_matrix_s8_06.py`, `scripts/test_sim_case_matrix_s8_06.py`, `web/workspace/sim-case-loader.mjs` |
| `S8-07` | verified：从真实 INI/include declarations 生成 235-case display family catalog；Axis 85、QtVCP 61、Gscreen 14、VisMach 21、GladeVCP 6、Touchy 6、PyVCP 5、other 37；AppShell 按案例显示 family capabilities/host plugin boundaries，未改变 Worker 权威状态或 blocked 语义 | `coverage/sim-display-families-s8-07.report.json`, `web/app/sim-display-families.mjs`, `web/app/display-family.mjs`, `web/app/test_display_family_s8_07.mjs`, `scripts/generate_sim_display_families_s8_07.py`, `scripts/test_sim_display_families_s8_07.py` |
| `S8-08` | verified：ldelta/rdelta 真实案例通过 HALLIB exact resolution、sim.var/sim.tbl fixtures、lineardelta/rotarydelta virtual adapters；nominal joints `[300,300,300]`/`[10,10,10]`、1x/fast/recovery parity 和 TASK_READY 通过，official oracle 与其它机床族边界保留 | `coverage/machine-families-s8-08.report.json`, `web/worker/test_machine_families_s8_08.mjs`, `scripts/generate_machine_families_s8_08.py`, `scripts/test_machine_families_s8_08.py` |
| `S8-09` | verified：10 个真实 Worker runtime extension runners 全部通过，覆盖 remap/O-word/filter、Python callbacks、tool/probe/IO ack、virtual devices 和 PLC；固定 tick、能力拒绝和 recovery/ack 边界保留，host Python/dynamic loader 不被误报为浏览器 parity | `coverage/runtime-extensions-s8-09.report.json`, `scripts/generate_runtime_extensions_s8_09.py`, `scripts/test_runtime_extensions_s8_09.py` |
| `S8-10` | blocked（正式停止条件）：按修复后的 source-backed 235-case matrix 重新聚合；96 个案例 TASK_READY、139 个案例保留 HAL/INI/资源/STARTUP blockers，WASM/native/Worker/App 技术回归通过；official full LinuxCNC oracle 仍 source-gated，Chromium/Firefox/Safari minimums 仍 TBD/Safari unavailable，OPFS recovery 仍 blocked；implementation coverage=verified、acceptance=blocked、`STOP_RELEASE`，不宣称 LinuxCNC 全功能 release | `coverage/full-case-acceptance-s8-10.report.json`（`b2230390241a9fb8fb723af3847baeec251e8b49526d264c8bd5ccef4e5d3133`）, `scripts/generate_full_case_acceptance_s8_10.py`, `scripts/test_full_case_acceptance_s8_10.py`, `nextTask1.md` |
| `TUTORIAL-00` | verified：固定唯一案例 `linuxcnc/configs/sim/axis/vismach/3axis-tutorial`；隔离目录先运行官方 `update_ini -f`，再以真实 DISPLAY 启动 LinuxCNC；AXIS `axis/Axis` 窗口 1300x1293 可见；Web exact bundle/Worker `TASK_READY` 和功能操作序列通过，Vismach executable 作为唯一 `WEB-EQUIV` model adapter 资源加载 | `coverage/axis3-tutorial-native-run.report.json`, `scripts/run_axis3_tutorial_native.py`, `web/worker/test_axis3_selected_case.mjs`, `docs/linuxcnc-web-wasm-3axis-tutorial-parity.md` |
| `TUTORIAL-01` | in_progress：锁定 4 个案例源文件、运行时 `.var/.bak/position_mm.txt` 生成规则、共享 intro graphic、HAL source lines 和 Vismach Python imports；下一步生成 exact resource/source graph 自哈希报告 | `docs/linuxcnc-web-wasm-3axis-tutorial-parity.md`, `linuxcnc/configs/sim/axis/vismach/3axis-tutorial`, `linuxcnc/lib/python/vismach.py`, `linuxcnc/lib/python/hal.py` |
| `TUTORIAL-01..03` | verified：3axis tutorial exact resource graph、Vismach `loadusr ./3axis-tutorial` 唯一 `WEB-EQUIV` HAL adapter、startup phase `NEW→TASK_READY` 和 deterministic loader/startup hash 通过；运行时 `3axis-tutorial_mm.var` 在 workspace exact path 生成 | `coverage/axis3-tutorial-resource-graph.report.json`, `web/worker/test_axis3_tutorial_hal_adapter.mjs`, `web/worker/test_axis3_tutorial_startup.mjs`, `scripts/test_axis3_tutorial_resource_graph.py`, `scripts/test_axis3_tutorial_hal_adapter.py`, `scripts/test_axis3_tutorial_startup.py` |
| `TUTORIAL-04` | verified：3axis tutorial `trivkins` X/Y/Z home、独立三轴 jog、limit 注入/清除、following error fault 和固定 tick snapshot 通过；X/Y/Z 位置变化、错误码和 snapshot hash 保留 | `web/worker/test_axis3_tutorial_motion.mjs`, `scripts/test_axis3_tutorial_motion.py` |
| `TUTORIAL-05` | verified：固定 `3axis-tutorial` 案例的 RS-274/G-code `G21/G90/G91/G0/G1/F/M2`、程序 Run/Pause/Resume/Step/Abort/Restart 和 MDI 通过；暂停/运行态 MDI 保留 `mdi_while_program_active` 拒绝边界，abort/recover 后 MDI 成功；非法 G-code 在执行阶段保留解释器错误和最终 state hash | `coverage/axis3-tutorial-program.report.json`, `web/worker/test_axis3_tutorial_program.mjs`, `scripts/generate_axis3_tutorial_program_report.py`, `scripts/test_axis3_tutorial_program.py` |
| `TUTORIAL-10` | verified（selected-case scope）：固定源程序目录执行 `linuxcnc <case_dir>/3axis-tutorial.ini` 前清理旧 LinuxCNC 服务和 lock；native AXIS 窗口图片、Chromium desktop/mobile 图片、exact Worker startup/HAL/motion/program/tool/IO/checkpoint/recovery 和 self-hash 总报告均已生成；Firefox/Safari、OPFS 物理崩溃和全量 release 保持独立 blocked | `coverage/axis3-tutorial-complete.report.json`, `coverage/axis3-tutorial-native-run.report.json`, `coverage/axis3-tutorial-visual/`, `web/worker/test_axis3_selected_case.mjs`, `scripts/run_axis3_tutorial_native.py` |
| `TUTORIAL-11` | verified：固定案例 Worker 真实 WASM 通过 T1 prepare/change、主轴 600 RPM/at-speed/stop、mist/flood 冷却与 fault、probe arm/update/trip/disarm、ESTOP/recover；保留 tool state、probe position、错误码和最终 hash | `coverage/axis3-tutorial-tool-io.report.json`（`529b35a6fb84f561772b941a57d8bea3cf355969a622c01287afd5e642e0e246`）, `web/worker/test_axis3_tutorial_tool_io.mjs`, `scripts/generate_axis3_tutorial_tool_io_report.py`, `scripts/test_axis3_tutorial_tool_io.py` |
| `TUTORIAL-12` | verified：参考 AXIS/QtVCP 源码遵循案例未定义 `HOME_SEQUENCE` 时的 individual home 语义，真实 native 按 `Z -> X -> Y` home；参考 `hal_manualtoolchange.py` 的 `change_button` pin，通过真实 HAL ACK 完成 T1 M6；native/Worker 同序列无首差，保留 source-defined semantics | `coverage/axis3-tutorial-sequence.report.json`, `coverage/axis3-tutorial-native-sequence.report.json`, `web/worker/test_axis3_tutorial_sequence.mjs`, `scripts/run_axis3_tutorial_native_sequence.py` |
| `TUTORIAL-13` | verified：修复 program recovery replay 顺序，selected case checkpoint 后连续/recovered endpoint hash 相等；坏 checkpoint fail-closed，runtime `.var/tool.tbl/position` policy 和无重复副作用均有证据 | `coverage/axis3-tutorial-persistence.report.json`（`a2d125b06fe81ad8442c3b2b1f766e2a01e8a3160b4738ebc1cba59f565800f2`）, `web/worker/test_axis3_tutorial_persistence.mjs`, `web/worker/sim-session.mjs` |
| `TUTORIAL-14` | verified（selected-case closure index）：所有 native/Worker/Chromium/tool-IO/persistence/sequence 证据冻结；native individual home 和 `change_button` tool ACK 已按源程序语义闭合；release action 仍为 `STOP_RELEASE`，外部浏览器/OPFS/硬件边界独立保留 | `coverage/axis3-tutorial-closure-index.report.json`, `scripts/generate_axis3_tutorial_closure_index.py`, `scripts/test_axis3_tutorial_closure_index.py` |
| `T3-COMPLETE-01` | verified（selected-case scope）：`3axis-tutorial` trivkins 运行期间 pose/velocity/queue depth 由 WASM `sim_motion_queue` 驱动；JS `AuthoritativeRuntime` authority 调用为 0；pause/resume/PROGRAM_STEP/abort、queue drain completion、checkpoint/trace import/recovery endpoint parity 和 damaged queue fail-closed 通过。非 selected-case compatibility mirror、T4 task/motion/HAL/IO canonical state、全量矩阵和 release blockers 保持 blocked；LinuxCNC source matrix 的旧 fixture drift 已由 loader 源语义修复 | `coverage/wasm-motion-authority-t3.report.json`（`8424f3bae26ff0b16868ddc1dde4f40e14fc64288aea3d9aba983cc46d62c967`）, `web/worker/test_wasm_motion_authority.mjs`, `web/worker/test_wasm_motion_checkpoint.mjs`, `scripts/generate_wasm_motion_authority_t3.py`, `coverage/wasm-only-source-audit.report.json` |
| `T4-CANONICAL-STATE-01` | verified（selected-case scope）：`SimTask` 通过 `sim_task_canonical` 成为 Worker task authority；`WasmHomeLimit` 通过锁定 `sim_kinematics_home_limit_*` ABI 成为 trivkins home/limit authority；snapshot、HOME/JOG/LIMIT、checkpoint、trace/import/recovery 的 task/motion/home-limit state hash 稳定，JS task tamper 被 WASM canonical 覆盖，损坏 home-limit state fail-closed。HAL/IO/tool/probe、外部设备输入、非 selected-case compatibility 和全量 release 仍 blocked | `coverage/wasm-canonical-state-t4.report.json`（`5f51ea1f766d7e3bf336c3dd11575a97fbdc1f340db58762ba4526c80b0de336`）, `web/worker/wasm-home-limit.mjs`, `web/worker/test_wasm_canonical_state.mjs`, `web/worker/test_wasm_canonical_state_checkpoint.mjs`, `scripts/generate_wasm_canonical_state_t4.py` |
| `T5-FULL-MATRIX-01` | blocked：生成九领域 native/WASM/Worker 功能矩阵；按 LinuxCNC AXIS 源语义修复空/缺失 `OPEN_FILE` 处理和 HALFILE 分类，235-case matrix 恢复 verified，分类为 `BLOCKED_HAL=106/BLOCKED_RESOURCE=11/TASK_READY=96`；T5 28 个矩阵命令全部通过，source semantics contract 已纳入输入闭合，完整 parity 与官方 oracle/配置资源/浏览器/OPFS 边界继续 blocked | `coverage/wasm-feature-matrix-t5.report.json`（`08c1229072214407d0efbcb1f939834b470b160b31bbf7211123dc43306434fa`）, `coverage/linuxcnc-source-semantics-contract.json`, `web/workspace/linuxcnc-source-semantics.mjs`, `scripts/generate_wasm_feature_matrix_t5.py` |
| `T6-FUNCTION-CLOSURE-01` | blocked：对 T5 八个 blocked rows 完成 source-backed closure audit；每行保留 source reference、WASM/Worker capability、已验证 slice、差异、停止原因和下一步。23 个专项命令全部通过，4 个 failure samples 保留 official oracle、资源、宿主能力和浏览器输入缺口；T5 fixture drift 已由源语义修复，不使用 JS fallback 或 selected-case promotion，`STOP_RELEASE` 保持 | `coverage/wasm-function-closure-t6.report.json`（`46230d88ac0f7687b81c148657dd4af51da2c60a99c3f8e0777e4e8ec57a82d3`）, `scripts/generate_wasm_function_closure_t6.py`, `scripts/test_wasm_function_closure_t6.py`, `web/worker/test_wasm_function_closure_t6.mjs`, `nextTask1.md` |
| `T7-RELEASE-GATE-01` | blocked：完成 simulation-track 只读 release-gate audit；T6 dependency、context consistency、candidate eligibility、`STOP_RELEASE`、六项 blocker identity、owner refresh 和 remediation self-hash 全部核对通过；8 个 blocker 与 3 个 failure samples 保留。未刷新 K8 owner gate，未修改 context lock、manifest、许可证或 owner decision | `coverage/wasm-simulation-release-gate-t7.report.json`（`3375aa400ed4b21c5ae020c22f39f5d212db26373aee6c245b7bc87d09312bba`）, `scripts/generate_wasm_simulation_release_gate_t7.py`, `scripts/test_wasm_simulation_release_gate_t7.py`, `nextTask1.md` |
| `SOURCE-SEMANTICS-CONTRACT-01` | verified：将 LinuxCNC AXIS `OPEN_FILE` optional、`INTRO_GRAPHIC` optional、HALFILE/resource 缺失分类、exact-path/no-basename-substitution、runtime fixture 和 Web 控制面板 projection-only 规则固化为共享模块与机器契约；源文件哈希、契约 self-hash、loader/matrix regression 通过，不修改 ABI/protocol/schema/context lock | `coverage/linuxcnc-source-semantics-contract.json`（`ff1ce5e1c3251b82e4298a084146e1eb64fb608ef5f7922c69cec10faba77d83`）, `web/workspace/linuxcnc-source-semantics.mjs`, `web/workspace/test_source_semantics.mjs`, `scripts/generate_source_semantics_contract.py`, `scripts/test_source_semantics_contract.py`, `docs/linuxcnc-web-wasm-source-semantics.md` |
| `PANEL-PLAN-01` | queued：建立固定 `3axis-tutorial` Web 控制面板源程序对标实施合同；固化“WASM 是唯一数据来源、状态机严格对标源程序、按钮 gate 完全一致、preview 与 native canonical motion 一致”四项硬约束；登记 12 项功能矩阵（P0: 1-9/12，P1: 10-11）、分层 envelope、状态真值表、preview segment 比较算法、统一报告模板、15 个详细实施任务、依赖、验收和 STOP_RELEASE 边界；不改变 ABI/protocol/schema/context lock | `docs/linuxcnc-web-wasm-3axis-tutorial-control-panel-implementation.md`, `nextTask1.md`, `coverage/linuxcnc-source-semantics-contract.json` |
| `AXIS-STATE-CONTRACT` | verified：新增 additive `axis_state` 视图，严格记录 LinuxCNC `STATE_*`/`MODE_*`/`INTERP_*` 数值、ESTOP_RESET/上电/关机/individual HOME/IDLE/RUNNING/PAUSED 迁移和 AXIS button gate；不修改 `sim_task.v1` | `docs/linuxcnc-web-wasm-3axis-tutorial-state-machine.md`, `web/worker/axis-state.mjs`, `web/worker/test_axis_state.mjs`, `web/react/src/store.ts`, `web/react/src/App.tsx` |
| `FE-M1-REACT` | verified：按技术路线新增 React 19/TypeScript/Vite/Tailwind/Radix/Three.js 前端入口；Dedicated Worker/WASM bundle、protocol.v1 reducer、exact-path `configs/sim` loader、LinuxCNC AXIS source icons 和 Three.js r185 三轴 viewer 通过 typecheck/build/preview；OPFS 仍 Worker-owned | `coverage/react-frontend-m1.report.json`, `web/react`, `scripts/generate_react_frontend_m1.py`, `scripts/test_react_frontend_m1.py` |
| `FE-M4-GUI-01` | verified：扫描 LinuxCNC AXIS/Gmoccapy/Touchy/Gscreen/QtVCP/PyVCP/GladeVCP/Vismach/NGCGUI/QtPlasmaC 等 GUI 源码、Python 库、sim descriptors/assets，1837 条文件记录、12 个 family、source hash/path 通过；341 条 manifest 反向归属缺口保留审计，许可证不阻塞技术移植 | `coverage/gui-source-inventory-fe-m4.report.json`, `scripts/generate_gui_source_inventory.py`, `scripts/test_gui_source_inventory.py`, `nextTask1.md` |
| `FE-M4-GUI-02` | verified：集中 React GUI domain model，定义 12 family、23 个 protocol.v1 Worker command、panel/capability/boundary 映射；PY-WASM、SIM-DEVICE、WEB-EQUIV、REAL-EXCLUDED 和 Worker/OPFS ownership 均有 contract evidence | `coverage/react-gui-domain-fe-m4.report.json`, `web/react/src/gui-domain.ts`, `scripts/generate_react_gui_domain_report.py`, `scripts/test_react_gui_domain_report.py` |
| `FE-M4-GUI-03` | verified：对照 LinuxCNC AXIS/Gremlin/glcanon 完成 React AXIS Web-equivalent workflow；program/MDI/run/pause/step/restart/abort/jog/home/override/spindle/tool/probe/coolant/estop/recover/DRO/Three.js 由 Worker 驱动，minimal_xyz Worker regression 和 React build 通过 | `coverage/axis-web-workflow-fe-m4.report.json`, `web/react/src/App.tsx`, `web/react/src/worker-client.ts`, `scripts/generate_axis_web_workflow_report.py`, `scripts/test_axis_web_workflow_report.py` |
| `FE-M4-GUI-04` | verified：将 Gmoccapy/Touchy/Gscreen/QtVCP/QtDragon/PyVCP/GladeVCP/Vismach/NGCGUI/QtPlasmaC/Plasma 转为 family descriptor；Web Component、Three.js、PY-WASM 和 REAL-EXCLUDED 边界集中定义，12 family contract 通过 | `coverage/gui-family-adapter-fe-m4.report.json`, `web/react/src/gui-family-adapter.ts`, `scripts/generate_gui_family_adapter_report.py`, `scripts/test_gui_family_adapter_report.py` |
| `FE-M4-GUI-05` | verified：建立 vismach/glcanon/NGCGUI/QtPlasmaC 的 Three.js visual workflow mapping；pose/joints/toolpath/stock/material/torch 只读 Worker snapshot，PY-WASM/真实硬件边界保留 | `coverage/gui-visual-workflow-fe-m4.report.json`, `web/react/src/visual-workflow.ts`, `scripts/generate_gui_visual_workflow_report.py`, `scripts/test_gui_visual_workflow_report.py` |
| `FE-M4-GUI-06` | blocked（正式停止条件）：现有 Chromium production preview desktop/mobile DOM、截图、Three.js canvas smoke verified；三浏览器 minimum matrix仍 TBD，Safari/Firefox 和 OPFS recovery 保持 blocked/STOP_RELEASE，不把 Chromium smoke 误报为全 GUI release | `coverage/gui-browser-visual-fe-m4.report.json`, `scripts/generate_gui_browser_visual_report.py`, `scripts/test_gui_browser_visual_report.py`, `nextTask1.md` |
| `REAL-CASE-CONDITIONS-01` | 真实 LinuxCNC `linuxcnc -r` 临时目录执行 verified：minimal_xyz 和 CoreXY 均进入真实 TASK tick；当前环境使用 `linuxcnc-uspace 2.10.0~pre1`、非 `PREEMPT_RT` 内核的 POSIX fallback、X11 DISPLAY；CoreXY 缺 tool.tbl 时出现官方 tool-table error，补入临时 linuxcnc.var/tool.tbl 后持续运行；参数文件会在可写目录中生成/更新，临时 fixture 不纳入 source parity | `coverage/native-linuxcnc-case-conditions.report.json`, `scripts/generate_native_linuxcnc_case_conditions.py`, `scripts/test_native_linuxcnc_case_conditions.py`, `linuxcnc/docs/src/getting-started/system-requirements.adoc` |
| `CASE-PARITY-PLAN-01` | 建立以真实 `configs/sim` 案例为中心的 S8-03..S8-10 执行队列；定义每案例 native/Worker/frontend parity contract、资源生成条件、Axis/QtVCP/Gscreen/Touchy/GladeVCP/PyVCP/VisMach 家族和 235-case full acceptance；S8-02 blocker 未被绕过 | `docs/linuxcnc-web-wasm-case-parity-plan.md`, `nextTask1.md` |

## 追溯规则

- 需要精确命令时读取对应提交或 CI 产物，不把完整 stdout/stderr 粘贴进任务指针。
- 需要验证哈希时读取 `context-lock.json` 和相应 `coverage/*.report.json`；二进制和大型 JSONL 默认不进入模型上下文。
- 新交接只替换当前节点摘要；旧摘要保留在本索引或版本历史中，不能累积到指针文件。