{
  "entrypoint_paths": [
    "linuxcnc/configs/sim/axis/anglejog/anglejog.ini",
    "linuxcnc/configs/sim/axis/axis.ini",
    "linuxcnc/configs/sim/axis/axis_9axis.ini",
    "linuxcnc/configs/sim/axis/axis_mm.ini",
    "linuxcnc/configs/sim/axis/canterp.ini",
    "linuxcnc/configs/sim/axis/classicladder/demo_sim_cl.ini",
    "linuxcnc/configs/sim/axis/corexy/corexy_by_hal.ini",
    "linuxcnc/configs/sim/axis/corexy/corexy_by_kins.ini",
    "linuxcnc/configs/sim/axis/db_demo/db_nonran.ini",
    "linuxcnc/configs/sim/axis/db_demo/db_ran.ini",
    "linuxcnc/configs/sim/axis/external_offsets/dynamic_offsets.ini",
    "linuxcnc/configs/sim/axis/external_offsets/eoffsets.ini",
    "linuxcnc/configs/sim/axis/external_offsets/jwp_z.ini",
    "linuxcnc/configs/sim/axis/external_offsets/opa.ini",
    "linuxcnc/configs/sim/axis/extrajoints/12extrajoints.ini",
    "linuxcnc/configs/sim/axis/extrajoints/1extrajoint.ini",
    "linuxcnc/configs/sim/axis/extrajoints/2extrajoints.ini",
    "linuxcnc/configs/sim/axis/foam/axis_foam.ini",
    "linuxcnc/configs/sim/axis/gantry/gantry.ini",
    "linuxcnc/configs/sim/axis/gantry/gantry_jjog.ini",
    "linuxcnc/configs/sim/axis/gantry/gantry_mm.ini",
    "linuxcnc/configs/sim/axis/geometry/xyzc.ini",
    "linuxcnc/configs/sim/axis/geometry/xyzc_origin.ini",
    "linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel.ini",
    "linuxcnc/configs/sim/axis/gladevcp/gladevcp_panel_tester.ini",
    "linuxcnc/configs/sim/axis/gladevcp/gladevcp_tab.ini",
    "linuxcnc/configs/sim/axis/gladevcp/probe.ini",
    "linuxcnc/configs/sim/axis/gladevcp/set-param-from-ini.ini",
    "linuxcnc/configs/sim/axis/halui_pyvcp/halui.ini",
    "linuxcnc/configs/sim/axis/histogram_demo.ini",
    "linuxcnc/configs/sim/axis/historical_lathe.ini",
    "linuxcnc/configs/sim/axis/ini_hal_demo.ini",
    "linuxcnc/configs/sim/axis/ini_with_includes/includes_demo.ini",
    "linuxcnc/configs/sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini",
    "linuxcnc/configs/sim/axis/iocontrolv2/g8812.ini",
    "linuxcnc/configs/sim/axis/iocontrolv2/m66track.ini",
    "linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui-ns.ini",
    "linuxcnc/configs/sim/axis/iocontrolv2/owordm6-ui.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xyzx_mpg/xyzx.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xz/xz.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xz/xz_both.ini",
    "linuxcnc/configs/sim/axis/ja_tests/xz/xz_both_auto.ini",
    "linuxcnc/configs/sim/axis/laser/laser.ini",
    "linuxcnc/configs/sim/axis/lathe-fanucy/lathe-fanucy.ini",
    "linuxcnc/configs/sim/axis/lathe.ini",
    "linuxcnc/configs/sim/axis/lathe_multispindle/lathe.ini",
    "linuxcnc/configs/sim/axis/ldelta.ini",
    "linuxcnc/configs/sim/axis/ldelta_demo.ini",
    "linuxcnc/configs/sim/axis/minimal_xyz.ini",
    "linuxcnc/configs/sim/axis/moveoff/1_onpause_local.ini",
    "linuxcnc/configs/sim/axis/moveoff/2_onpause_external.ini",
    "linuxcnc/configs/sim/axis/moveoff/3_always_local.ini",
    "linuxcnc/configs/sim/axis/moveoff/4_always_external.ini",
    "linuxcnc/configs/sim/axis/moveoff/5_no_gui.ini",
    "linuxcnc/configs/sim/axis/moveoff/6_zretract.ini",
    "linuxcnc/configs/sim/axis/moveoff/7_pyvcp.ini",
    "linuxcnc/configs/sim/axis/moveoff/8_gladevcp.ini",
    "linuxcnc/configs/sim/axis/ngcgui/ngcgui.ini",
    "linuxcnc/configs/sim/axis/ngcgui/ngcgui_gcmc.ini",
    "linuxcnc/configs/sim/axis/ngcgui/ngcgui_lathe.ini",
    "linuxcnc/configs/sim/axis/ngcgui/ngcgui_simple.ini",
    "linuxcnc/configs/sim/axis/ngcgui/pyngcgui_axis.ini",
    "linuxcnc/configs/sim/axis/orphans/acc_test.ini",
    "linuxcnc/configs/sim/axis/orphans/axis_noio.ini",
    "linuxcnc/configs/sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini",
    "linuxcnc/configs/sim/axis/orphans/medium.ini",
    "linuxcnc/configs/sim/axis/panelui-demo/_panelui.ini",
    "linuxcnc/configs/sim/axis/panelui-demo/panelui-demo.ini",
    "linuxcnc/configs/sim/axis/pentapod/pentapod.ini",
    "linuxcnc/configs/sim/axis/plasma/imperial.ini",
    "linuxcnc/configs/sim/axis/plasma/metric.ini",
    "linuxcnc/configs/sim/axis/profile_axis.ini",
    "linuxcnc/configs/sim/axis/qtvcp/qtvcp_tab.ini",
    "linuxcnc/configs/sim/axis/qtvcp/qtvismach_tab.ini",
    "linuxcnc/configs/sim/axis/random_tc.ini",
    "linuxcnc/configs/sim/axis/rdelta.ini",
    "linuxcnc/configs/sim/axis/remap/cycle/cycle.ini",
    "linuxcnc/configs/sim/axis/remap/extend-builtins/extend-builtins.ini",
    "linuxcnc/configs/sim/axis/remap/getting-started/demo.ini",
    "linuxcnc/configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini",
    "linuxcnc/configs/sim/axis/remap/rack-toolchange/racktoolchange.ini",
    "linuxcnc/configs/sim/axis/remap/stop-lookahead/demo.ini",
    "linuxcnc/configs/sim/axis/rose_engine/rose_engine.ini",
    "linuxcnc/configs/sim/axis/simtcl/twopass_basic.ini",
    "linuxcnc/configs/sim/axis/simtcl/twopass_compat.ini",
    "linuxcnc/configs/sim/axis/spindle_orient/orient.ini",
    "linuxcnc/configs/sim/axis/twopass/twopass.ini",
    "linuxcnc/configs/sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axis.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/max5/max5kins.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/max5/max5triv.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/table-dual-rotary/xyzab-tdr.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini",
    "linuxcnc/configs/sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini",
    "linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_graycode.ini",
    "linuxcnc/configs/sim/axis/vismach/VMC_toolchange/vmc_index.ini",
    "linuxcnc/configs/sim/axis/vismach/hbm/hbm.ini",
    "linuxcnc/configs/sim/axis/vismach/hexapod-sim/hexapod.ini",
    "linuxcnc/configs/sim/axis/vismach/melfa-sim/melfa.ini",
    "linuxcnc/configs/sim/axis/vismach/millturn/millturn.ini",
    "linuxcnc/configs/sim/axis/vismach/puma/puma.ini",
    "linuxcnc/configs/sim/axis/vismach/puma/puma560.ini",
    "linuxcnc/configs/sim/axis/vismach/puma/puma560_uvw.ini",
    "linuxcnc/configs/sim/axis/vismach/puma/puma_cube.ini",
    "linuxcnc/configs/sim/axis/vismach/rolfmill/rolfmill.ini",
    "linuxcnc/configs/sim/axis/vismach/scara/scara.ini",
    "linuxcnc/configs/sim/axis/wrapped_rotary/wrapped_rotary.ini",
    "linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout1.ini",
    "linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2.ini",
    "linuxcnc/configs/sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini",
    "linuxcnc/configs/sim/craftsman/cnc_settings.ini",
    "linuxcnc/configs/sim/craftsman/craftsmancnc-axis.ini",
    "linuxcnc/configs/sim/craftsman/craftsmancnc.ini",
    "linuxcnc/configs/sim/gmoccapy/6_axis.ini",
    "linuxcnc/configs/sim/gmoccapy/7_axis.ini",
    "linuxcnc/configs/sim/gmoccapy/7_axis_tool.ini",
    "linuxcnc/configs/sim/gmoccapy/8_axis.ini",
    "linuxcnc/configs/sim/gmoccapy/9_axis.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_4_axis.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAB.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZAC.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_XYZCW.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_left_panel.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_messages.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_pedant.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_pyngcgui.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_right_panel.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_tool_sensor.ini",
    "linuxcnc/configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_C.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_CW.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini",
    "linuxcnc/configs/sim/gmoccapy/lathe_configs/lathe_macros.ini",
    "linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini",
    "linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/scara/scara.ini",
    "linuxcnc/configs/sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini",
    "linuxcnc/configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini",
    "linuxcnc/configs/sim/gscreen/gscreen.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/9axis.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/industrial.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/tester.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_custom/tester_metric.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_lathe.ini",
    "linuxcnc/configs/sim/gscreen/gscreen_mm.ini",
    "linuxcnc/configs/sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini",
    "linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini",
    "linuxcnc/configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini",
    "linuxcnc/configs/sim/gscreen/silverdragon/silverdragon.ini",
    "linuxcnc/configs/sim/gscreen/spartan/spartan.ini",
    "linuxcnc/configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini",
    "linuxcnc/configs/sim/pyvcp_demo/pyvcp_demo1.ini",
    "linuxcnc/configs/sim/pyvcp_demo/pyvcp_embed_tab.ini",
    "linuxcnc/configs/sim/qtaxis/gantry/qt_gantry.ini",
    "linuxcnc/configs/sim/qtaxis/non-trivial/scara/scara.ini",
    "linuxcnc/configs/sim/qtaxis/xyz/qtaxis.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini",
    "linuxcnc/configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini",
    "linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini",
    "linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini",
    "linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini",
    "linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini",
    "linuxcnc/configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_l_imperial.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_l_metric.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_p_imperial.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_p_metric.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_s_imperial.ini",
    "linuxcnc/configs/sim/qtplasmac/qtplasmac_s_metric.ini",
    "linuxcnc/configs/sim/qttouchy/qttouchy.ini",
    "linuxcnc/configs/sim/qtvcp_screens/blender.ini",
    "linuxcnc/configs/sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini",
    "linuxcnc/configs/sim/qtvcp_screens/non-trivial/scara/scara.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qt_800x600.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qt_gantry.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtaxis.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtaxis_mpg.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdefault.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdefault_9axis.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdefault_gantry.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdefault_mm.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_hd.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_inch.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini",
    "linuxcnc/configs/sim/qtvcp_screens/qtx1mill.ini",
    "linuxcnc/configs/sim/qtvcp_screens/tester.ini",
    "linuxcnc/configs/sim/tklinuxcnc/ldelta.ini",
    "linuxcnc/configs/sim/tklinuxcnc/servo_sim.ini",
    "linuxcnc/configs/sim/tklinuxcnc/tklinuxcnc.ini",
    "linuxcnc/configs/sim/tklinuxcnc/tripod.ini",
    "linuxcnc/configs/sim/tklinuxcnc/trivkins/xz.ini",
    "linuxcnc/configs/sim/tklinuxcnc/trivkins/xz_both.ini",
    "linuxcnc/configs/sim/touchy/gladevcp/gladevcp_touchy.ini",
    "linuxcnc/configs/sim/touchy/gladevcp/touchy.ini",
    "linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy.ini",
    "linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini",
    "linuxcnc/configs/sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini",
    "linuxcnc/configs/sim/touchy/touchy.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_auto_tool_probe.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_xyz.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_xyza.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_xyzab.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_xyzy.ini",
    "linuxcnc/configs/sim/woodpecker/woodpecker_xyzya.ini"
  ],
  "entrypoints": 233,
  "missing": 997,
  "output_sha256": "d4d02cb13f2f9cb58404630d4de8ac0226e02075166fe30f2b03a6abca4be5bc",
  "resources": 16093,
  "schema": "config-resources-report.v1",
  "unresolved": 91
}