startup gcodes  (0, 800, -1, 170, 400, 200, 900, 940, 540, 430, 990, 640, -1, 970, 911, 80, -1)
set_g5x_offset (1, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_g92_offset (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_xy_rotation (0.0,)
# interpreter: feed mode set to units per minute
set feed rate 0.0
set plane 1
# interpreter: cutter radius compensation off
tool_offset (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_g5x_offset (2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_g92_offset (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_xy_rotation (0.0,)
# interpreter: retract mode set to r_plane
straight_traverse  (1.23, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set feed rate 100.0
arc_feed  (1.23, 0.0, 21.23, 0.0, -1, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
straight_traverse  (10.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_g5x_offset (1, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
set_xy_rotation (0.0,)
set feed rate 0.0