;     file name: ramp.ngc
; date and time: Wed Nov 08 2023    21:15:23
; postprocessor: LinuxCNC PlasmaC.scpost rev: 0.5
;
#<scale> = 25.4

;begin pre-amble
 G20 (imperial units)
 G64 P0.005 (path tolerance)
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M52 P1 (enable adaptive feed)
 M65 P2 (enable THC)
 M65 P3 (enable torch)
 M68 E3 Q0 (velocity 100%)
;end pre-amble
 m159 p601 q2 (pierce type - ramp)
 m159 p602 q50 (pierce motino delay as a percentage of total pierce time - 50%)
 m159 p603 q[2.5 / #<scale>] (pierce end height)
 m159 p604 q1 (cut height delay in seconds)
 m159 p605 q[980 / #<scale>] (gouge speed in units per min)
 m159 p606 q[5 / #<scale>] (Gouge distance in machine units)
 m159 p607 q[245 / #<scale>] (Creep speed in unit per min)
 m159 p608 q[3 / #<scale>] (Creep distance in machine units)
 M67 E3 Q100
;
;begin material setup
 T0 M6 (select plasma tool)
 G43 H0 (apply tool offsets)
 (o=0,kw=0.07874, ph=0.15748, pd=1, ch=0.05905, fr=19.29133, th=1, cv=99, pe=0.3, jh=0, jd=0)
 F#<_hal[plasmac.cut-feed-rate]>
;end material setup
 G0 X0 Y0
 M3 $0 S1 (plasma start)
 M67 E3 Q100
 G1 X0 Y[60 / #<scale>]
 m159 p609  (reset to default pierce behaviour)
 M5 $0 (plasma end)
 ;
 ;begin post-amble
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M65 P2 (enable THC)
 M65 P3 (enable torch)
 M68 E3 Q0 (velocity 100%)
 M5 $-1 (backup stop)
 ;end post-amble
 ;
 ;begin statistics
 ;Pierces = 1
 ;   Cuts = 1,    Length = 60.00mm
 ;end statistics
 ;
 M30 (end program)