# Include your customized HAL commands here
# The commands in this file are run after the GUI starts

sets spindle-at-speed true
setp gscreen.led_spindle_fault true
setp gscreen.led_fault true
setp gscreen.led_aux true

net spindle-cw gscreen.led_spindle_fwd
net spindle-ccw gscreen.led_spindle_rev spindle.0.reverse
net spindle-cmd-rpm-abs gscreen.spindle-spd-disp

net tool-change gscreen.change-tool iocontrol.0.tool-change 
net tool-changed gscreen.tool-changed iocontrol.0.tool-changed
net tool-prep-number gscreen.tool-number iocontrol.0.tool-prep-number
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared