# first load the core RT modules that will be needed
# kinematics
loadrt [KINS]KINEMATICS
# motion controller, get name and thread periods from ini file
loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS

loadrt pluto_step
addf pluto-step.read servo-thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread
addf pluto-step.write servo-thread

setp pluto-step.stepgen.0.scale [JOINT_0]SCALE
setp pluto-step.stepgen.1.scale [JOINT_1]SCALE
setp pluto-step.stepgen.2.scale [JOINT_2]SCALE

net Xpos-cmd joint.0.motor-pos-cmd => pluto-step.stepgen.0.position-cmd
net Ypos-cmd joint.1.motor-pos-cmd => pluto-step.stepgen.1.position-cmd
net Zpos-cmd joint.2.motor-pos-cmd => pluto-step.stepgen.2.position-cmd

net Xpos-fb pluto-step.stepgen.0.position-fb => joint.0.motor-pos-fb
net Ypos-fb pluto-step.stepgen.1.position-fb => joint.1.motor-pos-fb
net Zpos-fb pluto-step.stepgen.2.position-fb => joint.2.motor-pos-fb

net Xen joint.0.amp-enable-out => pluto-step.stepgen.0.enable
net Yen joint.1.amp-enable-out => pluto-step.stepgen.1.enable
net Zen joint.2.amp-enable-out => pluto-step.stepgen.2.enable

# create a signal for the estop loopback
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in

# create signals for tool prepare loopback
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared

# create a signal for "spindle on"
net spindle_on spindle.0.on => pluto-step.dout.00

setp pluto-step.stepgen.steplen 20000
setp pluto-step.stepgen.stepspace 20000
setp pluto-step.stepgen.dirtime 20000