Files
cnc_wams/wasm-port/tests/fixtures/canon/canon_runtime_edges.events

34 lines
1.3 KiB
Plaintext

canon_event=SET_SPINDLE_SPEED spindle=0 speed=1200
canon_event=START_SPINDLE_CLOCKWISE spindle=0 wait_for_at_speed=1
canon_event=STOP_SPINDLE_TURNING spindle=0
canon_event=SET_SPINDLE_SPEED spindle=0 speed=900
canon_event=START_SPINDLE_COUNTERCLOCKWISE spindle=0 wait_for_at_speed=1
canon_event=STOP_SPINDLE_TURNING spindle=0
canon_event=MIST_ON
canon_event=FLOOD_ON
canon_event=MIST_OFF
canon_event=FLOOD_OFF
canon_event=DWELL seconds=0.25
canon_event=ENABLE_FEED_OVERRIDE
canon_event=ENABLE_SPEED_OVERRIDE spindle=0
canon_event=DISABLE_FEED_OVERRIDE
canon_event=ENABLE_FEED_OVERRIDE
canon_event=DISABLE_SPEED_OVERRIDE spindle=0
canon_event=ENABLE_SPEED_OVERRIDE spindle=0
canon_event=DISABLE_ADAPTIVE_FEED
canon_event=ENABLE_ADAPTIVE_FEED
canon_event=DISABLE_FEED_HOLD
canon_event=ENABLE_FEED_HOLD
canon_event=SET_MOTION_OUTPUT_BIT index=3
canon_event=CLEAR_MOTION_OUTPUT_BIT index=3
canon_event=SET_AUX_OUTPUT_BIT index=4
canon_event=CLEAR_AUX_OUTPUT_BIT index=4
canon_event=SET_MOTION_OUTPUT_VALUE index=2 value=12.5
canon_event=SET_AUX_OUTPUT_VALUE index=2 value=34.5
canon_event=WAIT index=1 input_type=1 wait_type=0 timeout=0
canon_event=PROGRAM_STOP
canon_event=SET_FEED_RATE rate=0
canon_event=STOP_SPINDLE_TURNING spindle=0
canon_event=SET_SPINDLE_MODE spindle=0 css_max=0
canon_event=PROGRAM_END