{
  "runtimeErrors": [],
  "samples": [
    {
      "runState": "idle",
      "mode": "manual",
      "interpState": "idle",
      "activeLine": 16,
      "motionIndex": 0,
      "sampleIndex": 0,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-interpreter-wasm",
      "message": "LinuxCNC machine-file remap run starting",
      "taskInterp": "IDLE",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 0,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackAxisPose": {
        "x": 43,
        "y": -32.15,
        "z": -11.306,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackTcp": {
        "x": 43,
        "y": -32.15,
        "z": -11.306
      },
      "uiTcp": {
        "x": 43,
        "y": -32.15,
        "z": -11.306
      },
      "axisPose": {
        "x": 43,
        "y": -32.15,
        "z": -11.306,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "tcpPose": {
        "x": 43,
        "y": -32.15,
        "z": -11.306,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "canvas": {
        "toolhead": "{\"x\":0.043,\"y\":-0.032,\"z\":-0.011}",
        "toolAxis": "{\"x\":0,\"y\":0,\"z\":1}",
        "tcpPose": "{\"x\":43,\"y\":-32.15,\"z\":-11.306,\"a\":0,\"b\":0,\"c\":0}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "idle",
      "mode": "auto",
      "interpState": "idle",
      "activeLine": 16,
      "motionIndex": 0,
      "sampleIndex": 0,
      "sourceMode": "linuxcnc-machine-file-remap-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status loop restarting",
      "taskInterp": "IDLE",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 0,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackTcp": {
        "x": 0,
        "y": 0,
        "z": 10
      },
      "uiTcp": {
        "x": 0,
        "y": 0,
        "z": 10
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "canvas": {
        "toolhead": "{\"x\":0,\"y\":0,\"z\":0.01}",
        "toolAxis": "{\"x\":0,\"y\":0,\"z\":1}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":10,\"a\":0,\"b\":0,\"c\":0}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 16,
      "motionIndex": 0,
      "sampleIndex": 0,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 5",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.42697,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.42697,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackTcp": {
        "x": 0,
        "y": 0,
        "z": 7.02247
      },
      "uiTcp": {
        "x": 0,
        "y": 0,
        "z": 7.02247
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 8.42697,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 8.42697,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "canvas": {
        "toolhead": "{\"x\":0,\"y\":0,\"z\":0.007}",
        "toolAxis": "{\"x\":0,\"y\":0,\"z\":1}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":8.427,\"a\":0,\"b\":0,\"c\":0}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 9",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 11.3766,
        "y": 11.3766,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackAxisPose": {
        "x": 11.3766,
        "y": 11.3766,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackTcp": {
        "x": 10.2389,
        "y": 10.2389,
        "z": 10
      },
      "uiTcp": {
        "x": 10.2389,
        "y": 10.2389,
        "z": 10
      },
      "axisPose": {
        "x": 11.3766,
        "y": 11.3766,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "tcpPose": {
        "x": 11.3766,
        "y": 11.3766,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "canvas": {
        "toolhead": "{\"x\":0.01,\"y\":0.01,\"z\":0.01}",
        "toolAxis": "{\"x\":0,\"y\":0,\"z\":1}",
        "tcpPose": "{\"x\":11.377,\"y\":11.377,\"z\":10,\"a\":0,\"b\":0,\"c\":0}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 14",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 17.0648,
        "y": 17.0648,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackAxisPose": {
        "x": 17.0648,
        "y": 17.0648,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "feedbackTcp": {
        "x": 15.9272,
        "y": 15.9272,
        "z": 10
      },
      "uiTcp": {
        "x": 15.9272,
        "y": 15.9272,
        "z": 10
      },
      "axisPose": {
        "x": 17.0648,
        "y": 17.0648,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "tcpPose": {
        "x": 17.0648,
        "y": 17.0648,
        "z": 10,
        "a": 0,
        "b": 0,
        "c": 0
      },
      "canvas": {
        "toolhead": "{\"x\":0.016,\"y\":0.016,\"z\":0.01}",
        "toolAxis": "{\"x\":0,\"y\":0,\"z\":1}",
        "tcpPose": "{\"x\":17.065,\"y\":17.065,\"z\":10,\"a\":0,\"b\":0,\"c\":0}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 19",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.55939,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.55939,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.317216245730563,
        "y": 2.3172162457305627,
        "z": 9.003589670650518
      },
      "uiTcp": {
        "x": -2.317216245730563,
        "y": 2.3172162457305627,
        "z": 9.003589670650518
      },
      "axisPose": {
        "x": -2.3118884056094284,
        "y": 2.311888405609428,
        "z": 8.982888242214605,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.3118884056094284,
        "y": 2.311888405609428,
        "z": 8.982888242214605,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.312,\"y\":2.312,\"z\":8.983,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 23",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.47127,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.47127,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.2959048852460238,
        "y": 2.295904885246023,
        "z": 8.920783956906865
      },
      "uiTcp": {
        "x": -2.2959048852460238,
        "y": 2.295904885246023,
        "z": 8.920783956906865
      },
      "axisPose": {
        "x": -2.290577045124889,
        "y": 2.2905770451248886,
        "z": 8.900082528470952,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.290577045124889,
        "y": 2.2905770451248886,
        "z": 8.900082528470952,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.291,\"y\":2.291,\"z\":8.9,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 28",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.36112,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.36112,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.269265684640349,
        "y": 2.2692656846403487,
        "z": 8.817276814727297
      },
      "uiTcp": {
        "x": -2.269265684640349,
        "y": 2.2692656846403487,
        "z": 8.817276814727297
      },
      "axisPose": {
        "x": -2.2639378445192144,
        "y": 2.2639378445192135,
        "z": 8.796575386291384,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.2639378445192144,
        "y": 2.2639378445192135,
        "z": 8.796575386291384,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.264,\"y\":2.264,\"z\":8.797,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 33",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.25097,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.25097,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.2426264840346746,
        "y": 2.242626484034674,
        "z": 8.713769672547729
      },
      "uiTcp": {
        "x": -2.2426264840346746,
        "y": 2.242626484034674,
        "z": 8.713769672547729
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 9.25097,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 9.25097,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":9.251,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 38",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.14082,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.14082,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.2159872834290004,
        "y": 2.215987283429,
        "z": 8.610262530368162
      },
      "uiTcp": {
        "x": -2.2159872834290004,
        "y": 2.215987283429,
        "z": 8.610262530368162
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 9.14082,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 9.14082,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":9.141,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 43",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.03067,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 9.03067,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.189348082823326,
        "y": 2.1893480828233254,
        "z": 8.506755388188592
      },
      "uiTcp": {
        "x": -2.189348082823326,
        "y": 2.1893480828233254,
        "z": 8.506755388188592
      },
      "axisPose": {
        "x": -2.184020242702191,
        "y": 2.1840202427021906,
        "z": 8.486053959752681,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.184020242702191,
        "y": 2.1840202427021906,
        "z": 8.486053959752681,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.009}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.184,\"y\":2.184,\"z\":8.486,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 47",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.94254,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.94254,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.168036722338786,
        "y": 2.1680367223387855,
        "z": 8.42394967444494
      },
      "uiTcp": {
        "x": -2.168036722338786,
        "y": 2.1680367223387855,
        "z": 8.42394967444494
      },
      "axisPose": {
        "x": -2.1627064637700246,
        "y": 2.162706463770024,
        "z": 8.403238849082816,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.1627064637700246,
        "y": 2.162706463770024,
        "z": 8.403238849082816,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.163,\"y\":2.163,\"z\":8.403,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 52",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.83239,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.83239,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.141395103285485,
        "y": 2.1413951032854848,
        "z": 8.320433135339163
      },
      "uiTcp": {
        "x": -2.141395103285485,
        "y": 2.1413951032854848,
        "z": 8.320433135339163
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 8.83239,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 8.83239,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":8.832,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 56",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.74427,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.74427,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.1200837428009454,
        "y": 2.120083742800945,
        "z": 8.237627421595509
      },
      "uiTcp": {
        "x": -2.1200837428009454,
        "y": 2.120083742800945,
        "z": 8.237627421595509
      },
      "axisPose": {
        "x": -2.1147559026798106,
        "y": 2.11475590267981,
        "z": 8.216925993159595,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.1147559026798106,
        "y": 2.11475590267981,
        "z": 8.216925993159595,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.115,\"y\":2.115,\"z\":8.217,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 62",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.61209,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.61209,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.088116702074136,
        "y": 2.0881167020741356,
        "z": 8.113418850980027
      },
      "uiTcp": {
        "x": -2.088116702074136,
        "y": 2.0881167020741356,
        "z": 8.113418850980027
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 8.61209,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 8.61209,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":8.612,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 67",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.50194,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.50194,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.061477501468462,
        "y": 2.0614775014684614,
        "z": 8.00991170880046
      },
      "uiTcp": {
        "x": -2.061477501468462,
        "y": 2.0614775014684614,
        "z": 8.00991170880046
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 8.50194,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 8.50194,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":8.502,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 72",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.39179,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.39179,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.0348383008627873,
        "y": 2.034838300862787,
        "z": 7.906404566620892
      },
      "uiTcp": {
        "x": -2.0348383008627873,
        "y": 2.034838300862787,
        "z": 7.906404566620892
      },
      "axisPose": {
        "x": -2.0295104607416525,
        "y": 2.029510460741652,
        "z": 7.8857031381849785,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.0295104607416525,
        "y": 2.029510460741652,
        "z": 7.8857031381849785,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.03,\"y\":2.03,\"z\":7.886,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 76",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.30367,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.30367,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -2.0135269403782474,
        "y": 2.013526940378247,
        "z": 7.823598852877237
      },
      "uiTcp": {
        "x": -2.0135269403782474,
        "y": 2.013526940378247,
        "z": 7.823598852877237
      },
      "axisPose": {
        "x": -2.008199100257113,
        "y": 2.0081991002571127,
        "z": 7.8028974244413245,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -2.008199100257113,
        "y": 2.0081991002571127,
        "z": 7.8028974244413245,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-2.008,\"y\":2.008,\"z\":7.803,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 81",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.19351,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.19351,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.9868853213249469,
        "y": 1.9868853213249464,
        "z": 7.720082313771463
      },
      "uiTcp": {
        "x": -1.9868853213249469,
        "y": 1.9868853213249464,
        "z": 7.720082313771463
      },
      "axisPose": {
        "x": -1.981557481203812,
        "y": 1.9815574812038115,
        "z": 7.6993808853355485,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.981557481203812,
        "y": 1.9815574812038115,
        "z": 7.6993808853355485,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.982,\"y\":1.982,\"z\":7.699,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 86",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.08336,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 8.08336,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.9602461207192723,
        "y": 1.9602461207192718,
        "z": 7.616575171591895
      },
      "uiTcp": {
        "x": -1.9602461207192723,
        "y": 1.9602461207192718,
        "z": 7.616575171591895
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 8.08336,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 8.08336,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":8.083,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 90",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.99524,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.99524,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.9389347602347327,
        "y": 1.9389347602347322,
        "z": 7.53376945784824
      },
      "uiTcp": {
        "x": -1.9389347602347327,
        "y": 1.9389347602347322,
        "z": 7.53376945784824
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.99524,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.99524,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.995,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 91",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.97321,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.97321,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.933606920113598,
        "y": 1.9336069201135975,
        "z": 7.513068029412326
      },
      "uiTcp": {
        "x": -1.933606920113598,
        "y": 1.9336069201135975,
        "z": 7.513068029412326
      },
      "axisPose": {
        "x": -1.928279079992463,
        "y": 1.9282790799924625,
        "z": 7.492366600976413,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.928279079992463,
        "y": 1.9282790799924625,
        "z": 7.492366600976413,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.008}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.928,\"y\":1.928,\"z\":7.492,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 93",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.92915,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.92915,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.922951239871328,
        "y": 1.9229512398713275,
        "z": 7.471665172540499
      },
      "uiTcp": {
        "x": -1.922951239871328,
        "y": 1.9229512398713275,
        "z": 7.471665172540499
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.92915,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.92915,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.929,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 95",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.88509,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.88509,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.9122955596290583,
        "y": 1.9122955596290578,
        "z": 7.4302623156686725
      },
      "uiTcp": {
        "x": -1.9122955596290583,
        "y": 1.9122955596290578,
        "z": 7.4302623156686725
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.88509,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.88509,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.885,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 97",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.84103,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.84103,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.9016398793867884,
        "y": 1.901639879386788,
        "z": 7.388859458796845
      },
      "uiTcp": {
        "x": -1.9016398793867884,
        "y": 1.901639879386788,
        "z": 7.388859458796845
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.84103,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.84103,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.841,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 98",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.819,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.819,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8963120392656536,
        "y": 1.8963120392656532,
        "z": 7.368158030360932
      },
      "uiTcp": {
        "x": -1.8963120392656536,
        "y": 1.8963120392656532,
        "z": 7.368158030360932
      },
      "axisPose": {
        "x": -1.8909841991445187,
        "y": 1.8909841991445182,
        "z": 7.347456601925018,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.8909841991445187,
        "y": 1.8909841991445182,
        "z": 7.347456601925018,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.891,\"y\":1.891,\"z\":7.347,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 100",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.77494,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.77494,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8856563590233837,
        "y": 1.8856563590233832,
        "z": 7.326755173489104
      },
      "uiTcp": {
        "x": -1.8856563590233837,
        "y": 1.8856563590233832,
        "z": 7.326755173489104
      },
      "axisPose": {
        "x": -1.880328518902249,
        "y": 1.8803285189022485,
        "z": 7.306053745053191,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.880328518902249,
        "y": 1.8803285189022485,
        "z": 7.306053745053191,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.88,\"y\":1.88,\"z\":7.306,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 102",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.73088,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.73088,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.875000678781114,
        "y": 1.8750006787811135,
        "z": 7.285352316617277
      },
      "uiTcp": {
        "x": -1.875000678781114,
        "y": 1.8750006787811135,
        "z": 7.285352316617277
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.73088,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.73088,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.731,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 104",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.68682,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.68682,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8643449985388443,
        "y": 1.8643449985388438,
        "z": 7.24394945974545
      },
      "uiTcp": {
        "x": -1.8643449985388443,
        "y": 1.8643449985388438,
        "z": 7.24394945974545
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.68682,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.68682,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.687,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 105",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.66479,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.66479,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8590171584177093,
        "y": 1.8590171584177089,
        "z": 7.223248031309536
      },
      "uiTcp": {
        "x": -1.8590171584177093,
        "y": 1.8590171584177089,
        "z": 7.223248031309536
      },
      "axisPose": {
        "x": -1.8536893182965744,
        "y": 1.853689318296574,
        "z": 7.202546602873623,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.8536893182965744,
        "y": 1.853689318296574,
        "z": 7.202546602873623,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.854,\"y\":1.854,\"z\":7.203,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 107",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.62073,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.62073,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8483614781754396,
        "y": 1.8483614781754392,
        "z": 7.18184517443771
      },
      "uiTcp": {
        "x": -1.8483614781754396,
        "y": 1.8483614781754392,
        "z": 7.18184517443771
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.62073,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.62073,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.621,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 108",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.5987,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.5987,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8430336380543046,
        "y": 1.8430336380543042,
        "z": 7.161143746001796
      },
      "uiTcp": {
        "x": -1.8430336380543046,
        "y": 1.8430336380543042,
        "z": 7.161143746001796
      },
      "axisPose": {
        "x": -1.8377057979331697,
        "y": 1.8377057979331692,
        "z": 7.140442317565882,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.8377057979331697,
        "y": 1.8377057979331692,
        "z": 7.140442317565882,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.838,\"y\":1.838,\"z\":7.14,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 110",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.55464,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.55464,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.832377957812035,
        "y": 1.8323779578120345,
        "z": 7.119740889129969
      },
      "uiTcp": {
        "x": -1.832377957812035,
        "y": 1.8323779578120345,
        "z": 7.119740889129969
      },
      "axisPose": {
        "x": -1.8270501176909,
        "y": 1.8270501176908995,
        "z": 7.099039460694056,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.8270501176909,
        "y": 1.8270501176908995,
        "z": 7.099039460694056,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.827,\"y\":1.827,\"z\":7.099,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 112",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.51057,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.51057,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8217198591221386,
        "y": 1.8217198591221382,
        "z": 7.078328635331935
      },
      "uiTcp": {
        "x": -1.8217198591221386,
        "y": 1.8217198591221382,
        "z": 7.078328635331935
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.51057,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.51057,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.511,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 113",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.48854,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.48854,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.8163920190010037,
        "y": 1.8163920190010034,
        "z": 7.05762720689602
      },
      "uiTcp": {
        "x": -1.8163920190010037,
        "y": 1.8163920190010034,
        "z": 7.05762720689602
      },
      "axisPose": {
        "x": -1.811064178879869,
        "y": 1.8110641788798685,
        "z": 7.036925778460107,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.811064178879869,
        "y": 1.8110641788798685,
        "z": 7.036925778460107,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.811,\"y\":1.811,\"z\":7.037,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 115",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.44448,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.44448,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.805736338758734,
        "y": 1.8057363387587335,
        "z": 7.016224350024194
      },
      "uiTcp": {
        "x": -1.805736338758734,
        "y": 1.8057363387587335,
        "z": 7.016224350024194
      },
      "axisPose": {
        "x": -1.800408498637599,
        "y": 1.8004084986375988,
        "z": 6.99552292158828,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.800408498637599,
        "y": 1.8004084986375988,
        "z": 6.99552292158828,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.8,\"y\":1.8,\"z\":6.996,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 117",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.40042,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.40042,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.7950806585164643,
        "y": 1.7950806585164638,
        "z": 6.974821493152366
      },
      "uiTcp": {
        "x": -1.7950806585164643,
        "y": 1.7950806585164638,
        "z": 6.974821493152366
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.40042,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.40042,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.4,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 118",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.37839,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.37839,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.7897528183953293,
        "y": 1.7897528183953288,
        "z": 6.954120064716453
      },
      "uiTcp": {
        "x": -1.7897528183953293,
        "y": 1.7897528183953288,
        "z": 6.954120064716453
      },
      "axisPose": {
        "x": -1.784424978274194,
        "y": 1.7844249782741939,
        "z": 6.933418636280538,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.784424978274194,
        "y": 1.7844249782741939,
        "z": 6.933418636280538,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.784,\"y\":1.784,\"z\":6.933,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 120",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.33433,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.33433,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.7790971381530594,
        "y": 1.779097138153059,
        "z": 6.912717207844625
      },
      "uiTcp": {
        "x": -1.7790971381530594,
        "y": 1.779097138153059,
        "z": 6.912717207844625
      },
      "axisPose": {
        "x": -1.7737692980319244,
        "y": 1.773769298031924,
        "z": 6.892015779408712,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": -1.7737692980319244,
        "y": 1.773769298031924,
        "z": 6.892015779408712,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":-1.774,\"y\":1.774,\"z\":6.892,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    },
    {
      "runState": "running",
      "mode": "auto",
      "interpState": "reading",
      "activeLine": 18,
      "motionIndex": 1,
      "sampleIndex": 1,
      "sourceMode": "linuxcnc-task-motion-hal-wasm",
      "programSourceMode": "linuxcnc-machine-file-remap-wasm",
      "message": "task/HAL status tick 122",
      "taskInterp": "READING",
      "uiAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.29027,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackAxisPose": {
        "x": 0,
        "y": 0,
        "z": 7.29027,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "feedbackTcp": {
        "x": -1.7684414579107894,
        "y": 1.768441457910789,
        "z": 6.871314350972797
      },
      "uiTcp": {
        "x": -1.7684414579107894,
        "y": 1.768441457910789,
        "z": 6.871314350972797
      },
      "axisPose": {
        "x": 0,
        "y": 0,
        "z": 7.29027,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "tcpPose": {
        "x": 0,
        "y": 0,
        "z": 7.29027,
        "a": 0,
        "b": 20,
        "c": 45
      },
      "canvas": {
        "toolhead": "{\"x\":-0.002,\"y\":0.002,\"z\":0.007}",
        "toolAxis": "{\"x\":0.242,\"y\":0.242,\"z\":0.94}",
        "tcpPose": "{\"x\":0,\"y\":0,\"z\":7.29,\"a\":0,\"b\":20,\"c\":45}",
        "pathPoints": "1300"
      }
    }
  ]
}