{
  "target": "https://82.156.24.101:8092/",
  "generatedAt": "2026-06-23T07:25:17.986Z",
  "summaries": [
    {
      "label": "loaded",
      "runState": "idle",
      "operatorMessage": "LinuxCNC task/HAL session ready /work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
      "machine": {
        "powerOn": false,
        "estopActive": false,
        "taskState": "estop-reset",
        "mode": "manual",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ESTOP_RESET",
        "taskMode": "MANUAL",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 0,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-canonical-motion",
        "semanticBoundary": "linuxcnc_canonical_motion_feedback_without_tp_sample",
        "sampleIndex": 0,
        "motionIndex": 0,
        "line": 8,
        "type": "STRAIGHT_TRAVERSE",
        "linearUnits": "mm",
        "timeSeconds": 0,
        "axisPose": {
          "x": 16.339,
          "y": -25.409,
          "z": 33.353,
          "a": -71.841,
          "b": 0,
          "c": -35.93
        },
        "currentVelocityMmPerMin": 2100,
        "requestedVelocityMmPerMin": 2100,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 0
      },
      "programRuntimeFeedbackHistoryLength": 1,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "after-direct-run",
      "runState": "idle",
      "operatorMessage": "LinuxCNC task/HAL session ready /work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
      "machine": {
        "powerOn": false,
        "estopActive": false,
        "taskState": "estop-reset",
        "mode": "manual",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ESTOP_RESET",
        "taskMode": "MANUAL",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 0,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-canonical-motion",
        "semanticBoundary": "linuxcnc_canonical_motion_feedback_without_tp_sample",
        "sampleIndex": 0,
        "motionIndex": 0,
        "line": 8,
        "type": "STRAIGHT_TRAVERSE",
        "linearUnits": "mm",
        "timeSeconds": 0,
        "axisPose": {
          "x": 16.339,
          "y": -25.409,
          "z": 33.353,
          "a": -71.841,
          "b": 0,
          "c": -35.93
        },
        "currentVelocityMmPerMin": 2100,
        "requestedVelocityMmPerMin": 2100,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 0
      },
      "programRuntimeFeedbackHistoryLength": 1,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "after-run-ready",
      "runState": "idle",
      "operatorMessage": "RUN ready: power on, homed, auto mode",
      "machine": {
        "powerOn": true,
        "estopActive": false,
        "taskState": "on",
        "mode": "auto",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ON",
        "taskMode": "AUTO",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 3600,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-task-motion-hal-wasm",
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sampleIndex": 40,
        "motionIndex": 0,
        "line": 1,
        "motionProgramLine": 1,
        "halProgramLine": 1,
        "activeLineSource": "motion-status",
        "activeLineHalSynced": true,
        "type": "TASK_MOTION",
        "timeSeconds": 0,
        "axisPose": {
          "x": 0,
          "y": 0,
          "z": 0,
          "a": 0,
          "b": 0,
          "c": 0
        },
        "currentVelocityMmPerMin": 3600,
        "requestedVelocityMmPerMin": 3600,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 40,
        "taskCycle": 4,
        "halChangedPinCount": 0
      },
      "programRuntimeFeedbackHistoryLength": 3,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "run-0500",
      "runState": "idle",
      "operatorMessage": "RUN ready: power on, homed, auto mode",
      "machine": {
        "powerOn": true,
        "estopActive": false,
        "taskState": "on",
        "mode": "auto",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ON",
        "taskMode": "AUTO",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 3600,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-task-motion-hal-wasm",
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sampleIndex": 40,
        "motionIndex": 0,
        "line": 1,
        "motionProgramLine": 1,
        "halProgramLine": 1,
        "activeLineSource": "motion-status",
        "activeLineHalSynced": true,
        "type": "TASK_MOTION",
        "timeSeconds": 0,
        "axisPose": {
          "x": 0,
          "y": 0,
          "z": 0,
          "a": 0,
          "b": 0,
          "c": 0
        },
        "currentVelocityMmPerMin": 3600,
        "requestedVelocityMmPerMin": 3600,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 40,
        "taskCycle": 4,
        "halChangedPinCount": 0
      },
      "programRuntimeFeedbackHistoryLength": 3,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "run-2500",
      "runState": "idle",
      "operatorMessage": "RUN ready: power on, homed, auto mode",
      "machine": {
        "powerOn": true,
        "estopActive": false,
        "taskState": "on",
        "mode": "auto",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ON",
        "taskMode": "AUTO",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 3600,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-task-motion-hal-wasm",
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sampleIndex": 40,
        "motionIndex": 0,
        "line": 1,
        "motionProgramLine": 1,
        "halProgramLine": 1,
        "activeLineSource": "motion-status",
        "activeLineHalSynced": true,
        "type": "TASK_MOTION",
        "timeSeconds": 0,
        "axisPose": {
          "x": 0,
          "y": 0,
          "z": 0,
          "a": 0,
          "b": 0,
          "c": 0
        },
        "currentVelocityMmPerMin": 3600,
        "requestedVelocityMmPerMin": 3600,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 40,
        "taskCycle": 4,
        "halChangedPinCount": 0
      },
      "programRuntimeFeedbackHistoryLength": 3,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "run-6500",
      "runState": "idle",
      "operatorMessage": "RUN ready: power on, homed, auto mode",
      "machine": {
        "powerOn": true,
        "estopActive": false,
        "taskState": "on",
        "mode": "auto",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ON",
        "taskMode": "AUTO",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 3600,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-task-motion-hal-wasm",
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sampleIndex": 40,
        "motionIndex": 0,
        "line": 1,
        "motionProgramLine": 1,
        "halProgramLine": 1,
        "activeLineSource": "motion-status",
        "activeLineHalSynced": true,
        "type": "TASK_MOTION",
        "timeSeconds": 0,
        "axisPose": {
          "x": 0,
          "y": 0,
          "z": 0,
          "a": 0,
          "b": 0,
          "c": 0
        },
        "currentVelocityMmPerMin": 3600,
        "requestedVelocityMmPerMin": 3600,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 40,
        "taskCycle": 4,
        "halChangedPinCount": 0
      },
      "programRuntimeFeedbackHistoryLength": 3,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": null,
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    },
    {
      "label": "after-stop",
      "runState": "stopped",
      "operatorMessage": "task/HAL program stopped",
      "machine": {
        "powerOn": true,
        "estopActive": false,
        "taskState": "on",
        "mode": "auto",
        "interpState": "idle",
        "interpResumeState": "idle",
        "taskPaused": false,
        "allHomed": false,
        "noForceHoming": false,
        "jogAxis": "x",
        "jogIncrement": 1,
        "mdiCommand": "G0 X0 Y0 Z0",
        "mdiDistanceMode": "absolute",
        "resetCount": 0
      },
      "activeProgram": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "selectedGcodeSourceRel": "configs/sim/axis/vismach/5axis/table-rotary-tilting/demos/impeller-7bl-xyzac.ngc",
      "taskHalRuntimeReadiness": {
        "apiName": "web-rtcp-5axis-linuxcnc-task-hal-runtime-readiness",
        "loaded": true,
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sdkSemanticBoundary": "linuxcnc_task_motion_hal_wasm_phase4_minimal",
        "executionContext": "direct",
        "workerUrl": null,
        "taskRuntimeReady": true,
        "motionRuntimeReady": true,
        "halRuntimeReady": true,
        "halSyncReady": true,
        "nativeTaskReady": true,
        "nativeHalSyncReady": true,
        "hardwareDrive": false,
        "hostRealtimeKernel": false,
        "externalUserMProcessReady": false
      },
      "taskHalSession": {
        "profileId": "xyzac-trt",
        "programPath": "/work/sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt/demos/impeller-7bl-xyzac.ngc",
        "fileCount": 18
      },
      "taskHalStatus": {
        "taskState": "ON",
        "taskMode": "AUTO",
        "interpState": "IDLE",
        "activeLine": 1,
        "currentVelocity": 3600,
        "taskCycle": 0
      },
      "programRuntimeFeedback": {
        "apiName": "web-rtcp-5axis-program-runtime-feedback",
        "sourceMode": "linuxcnc-task-motion-hal-wasm",
        "semanticBoundary": "linuxcnc_task_motion_hal_wasm_simulation_runtime",
        "sampleIndex": 50,
        "motionIndex": 0,
        "line": 1,
        "motionProgramLine": 1,
        "halProgramLine": 1,
        "activeLineSource": "motion-status",
        "activeLineHalSynced": true,
        "type": "TASK_MOTION",
        "timeSeconds": 0,
        "axisPose": {
          "x": 0,
          "y": 0,
          "z": 0,
          "a": 0,
          "b": 0,
          "c": 0
        },
        "currentVelocityMmPerMin": 3600,
        "requestedVelocityMmPerMin": 3600,
        "distanceToGo": 0,
        "dtg": {
          "x": 0,
          "y": 0,
          "z": 0
        },
        "queueDepth": 0,
        "activeDepth": 0,
        "cycle": 50,
        "taskCycle": 5,
        "halChangedPinCount": 0
      },
      "programRuntimeFeedbackHistoryLength": 4,
      "taskHalStatusLoop": {
        "apiName": "web-rtcp-5axis-task-hal-status-loop",
        "active": false,
        "sequence": 0,
        "profileId": null,
        "iniPath": null,
        "kinematicsModuleId": null,
        "tickCount": 0,
        "batchSize": 5,
        "intervalMs": 25,
        "taskPeriodNs": 10000000,
        "servoPeriodNs": 1000000,
        "lastStatusAt": null,
        "lastError": null,
        "stopReason": "stopped",
        "semanticBoundary": "js_status_polling_loop_for_linuxcnc_task_hal_motion_status"
      },
      "runGate": null
    }
  ],
  "consoleLogs": [
    {
      "type": "warn",
      "text": "[.WebGL-0x369c000f8800]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels",
      "location": {
        "url": "https://82.156.24.101:8092/"
      }
    },
    {
      "type": "warn",
      "text": "[.WebGL-0x369c000f8800]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels",
      "location": {
        "url": "https://82.156.24.101:8092/"
      }
    },
    {
      "type": "warn",
      "text": "[.WebGL-0x369c000f8800]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels",
      "location": {
        "url": "https://82.156.24.101:8092/"
      }
    },
    {
      "type": "warn",
      "text": "[.WebGL-0x369c000f8800]GL Driver Message (OpenGL, Performance, GL_CLOSE_PATH_NV, High): GPU stall due to ReadPixels (this message will no longer repeat)",
      "location": {
        "url": "https://82.156.24.101:8092/"
      }
    }
  ],
  "pageErrors": []
}