按推荐建议，继续执行

结论：继续按 LinuxCNC 源码直接复用路线推进，新增 corexy、rotate、rose、max 四个运动学源码的 vendored 同步、native 探针、source probe 覆盖和复用文档，并通过 native 验证。

wasm-port/tools/build_native_probes.sh

@@ -382,6 +382,30 @@ XYZBC_TRT_KINEMATICS_PROBE_SOURCES=(
   "$WRAP_DIR/linuxcnc_xyzbc_trt_kinematics_probe.cpp"
 )
 
+COREXY_KINEMATICS_PROBE_SOURCES=(
+  "$VENDOR_DIR/src/emc/kinematics/corexykins.c"
+  "$WRAP_DIR/linuxcnc_hal_adapter.cpp"
+  "$WRAP_DIR/linuxcnc_corexy_kinematics_probe.cpp"
+)
+
+ROTATE_KINEMATICS_PROBE_SOURCES=(
+  "$VENDOR_DIR/src/emc/kinematics/rotatekins.c"
+  "$WRAP_DIR/linuxcnc_hal_adapter.cpp"
+  "$WRAP_DIR/linuxcnc_rotate_kinematics_probe.cpp"
+)
+
+ROSE_KINEMATICS_PROBE_SOURCES=(
+  "$VENDOR_DIR/src/emc/kinematics/rosekins.c"
+  "$WRAP_DIR/linuxcnc_hal_adapter.cpp"
+  "$WRAP_DIR/linuxcnc_rose_kinematics_probe.cpp"
+)
+
+MAX_KINEMATICS_PROBE_SOURCES=(
+  "$VENDOR_DIR/src/emc/kinematics/maxkins.c"
+  "$WRAP_DIR/linuxcnc_hal_adapter.cpp"
+  "$WRAP_DIR/linuxcnc_max_kinematics_probe.cpp"
+)
+
 TP_CORE_SOURCES=(
   "$VENDOR_DIR/src/emc/tp/tp.c"
   "$VENDOR_DIR/src/emc/tp/tc.c"
@@ -583,6 +607,34 @@ build_binary_target \
   XYZBC_TRT_KINEMATICS_PROBE_SOURCES \
   NO_LINK_FLAGS
 
+build_binary_target \
+  linuxcnc_corexy_kinematics_probe \
+  "$BUILD_DIR/linuxcnc_corexy_kinematics_probe" \
+  TP_FLAGS \
+  COREXY_KINEMATICS_PROBE_SOURCES \
+  NO_LINK_FLAGS
+
+build_binary_target \
+  linuxcnc_rotate_kinematics_probe \
+  "$BUILD_DIR/linuxcnc_rotate_kinematics_probe" \
+  TP_FLAGS \
+  ROTATE_KINEMATICS_PROBE_SOURCES \
+  NO_LINK_FLAGS
+
+build_binary_target \
+  linuxcnc_rose_kinematics_probe \
+  "$BUILD_DIR/linuxcnc_rose_kinematics_probe" \
+  TP_FLAGS \
+  ROSE_KINEMATICS_PROBE_SOURCES \
+  NO_LINK_FLAGS
+
+build_binary_target \
+  linuxcnc_max_kinematics_probe \
+  "$BUILD_DIR/linuxcnc_max_kinematics_probe" \
+  TP_FLAGS \
+  MAX_KINEMATICS_PROBE_SOURCES \
+  NO_LINK_FLAGS
+
 if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_kinematics_probe.exitcode")" == "0" ]]; then
   set +e
   "$BUILD_DIR/linuxcnc_kinematics_probe" \
@@ -643,6 +695,66 @@ else
     "$BUILD_DIR/linuxcnc_xyzbc_trt_kinematics_probe.run.stderr.log"
 fi
 
+if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_corexy_kinematics_probe.exitcode")" == "0" ]]; then
+  set +e
+  "$BUILD_DIR/linuxcnc_corexy_kinematics_probe" \
+    >"$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.stdout.log" \
+    2>"$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.stderr.log"
+  COREXY_KINEMATICS_RUN_RC=$?
+  set -e
+  echo "$COREXY_KINEMATICS_RUN_RC" > "$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.exitcode"
+else
+  rm -f \
+    "$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.exitcode" \
+    "$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.stdout.log" \
+    "$BUILD_DIR/linuxcnc_corexy_kinematics_probe.run.stderr.log"
+fi
+
+if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_rotate_kinematics_probe.exitcode")" == "0" ]]; then
+  set +e
+  "$BUILD_DIR/linuxcnc_rotate_kinematics_probe" \
+    >"$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.stdout.log" \
+    2>"$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.stderr.log"
+  ROTATE_KINEMATICS_RUN_RC=$?
+  set -e
+  echo "$ROTATE_KINEMATICS_RUN_RC" > "$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.exitcode"
+else
+  rm -f \
+    "$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.exitcode" \
+    "$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.stdout.log" \
+    "$BUILD_DIR/linuxcnc_rotate_kinematics_probe.run.stderr.log"
+fi
+
+if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_rose_kinematics_probe.exitcode")" == "0" ]]; then
+  set +e
+  "$BUILD_DIR/linuxcnc_rose_kinematics_probe" \
+    >"$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.stdout.log" \
+    2>"$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.stderr.log"
+  ROSE_KINEMATICS_RUN_RC=$?
+  set -e
+  echo "$ROSE_KINEMATICS_RUN_RC" > "$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.exitcode"
+else
+  rm -f \
+    "$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.exitcode" \
+    "$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.stdout.log" \
+    "$BUILD_DIR/linuxcnc_rose_kinematics_probe.run.stderr.log"
+fi
+
+if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_max_kinematics_probe.exitcode")" == "0" ]]; then
+  set +e
+  "$BUILD_DIR/linuxcnc_max_kinematics_probe" \
+    >"$BUILD_DIR/linuxcnc_max_kinematics_probe.run.stdout.log" \
+    2>"$BUILD_DIR/linuxcnc_max_kinematics_probe.run.stderr.log"
+  MAX_KINEMATICS_RUN_RC=$?
+  set -e
+  echo "$MAX_KINEMATICS_RUN_RC" > "$BUILD_DIR/linuxcnc_max_kinematics_probe.run.exitcode"
+else
+  rm -f \
+    "$BUILD_DIR/linuxcnc_max_kinematics_probe.run.exitcode" \
+    "$BUILD_DIR/linuxcnc_max_kinematics_probe.run.stdout.log" \
+    "$BUILD_DIR/linuxcnc_max_kinematics_probe.run.stderr.log"
+fi
+
 if [[ "$(tr -d '[:space:]' < "$BUILD_DIR/linuxcnc_tp_api_probe.exitcode")" == "0" ]]; then
   set +e
   "$BUILD_DIR/linuxcnc_tp_api_probe" \
@@ -789,6 +901,30 @@ build_object_target \
   "$VENDOR_DIR/src/emc/kinematics/xyzbc-trt-kins.c" \
   TP_FLAGS
 
+build_object_target \
+  linuxcnc_corexykins_source_probe \
+  "$BUILD_DIR/linuxcnc_corexykins_source_probe.o" \
+  "$VENDOR_DIR/src/emc/kinematics/corexykins.c" \
+  TP_FLAGS
+
+build_object_target \
+  linuxcnc_rotatekins_source_probe \
+  "$BUILD_DIR/linuxcnc_rotatekins_source_probe.o" \
+  "$VENDOR_DIR/src/emc/kinematics/rotatekins.c" \
+  TP_FLAGS
+
+build_object_target \
+  linuxcnc_rosekins_source_probe \
+  "$BUILD_DIR/linuxcnc_rosekins_source_probe.o" \
+  "$VENDOR_DIR/src/emc/kinematics/rosekins.c" \
+  TP_FLAGS
+
+build_object_target \
+  linuxcnc_maxkins_source_probe \
+  "$BUILD_DIR/linuxcnc_maxkins_source_probe.o" \
+  "$VENDOR_DIR/src/emc/kinematics/maxkins.c" \
+  TP_FLAGS
+
 build_object_target \
   linuxcnc_interp_convert_source_probe \
   "$BUILD_DIR/linuxcnc_interp_convert_source_probe.o" \