Expand LinuxCNC interpreter regression coverage

wasm-port/tools/build_native_probes.sh

@@ -16,8 +16,36 @@ EXISTS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/exists/test.ngc"
 RETURN_VALUE_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/return-value/test.ngc"
 SUBS_FOLLOW_MAIN_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/subs-follow-main/test.ngc"
 FRACTIONAL_LINENUMBERS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/fractional-linenumbers/test.ngc"
+CAM_NISLEY_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/cam-nisley/cam.ngc"
+CAM_NISLEY_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/interp/cam-nisley/test.tbl"
+CAM_NISLEY_INI="$BUILD_DIR/cam-nisley.ini"
+CRAZY_PATHS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/crazy-paths/test.ngc"
 NAMEDPARAM_BUG424_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/namedparam-bug424/test.ngc"
 FLOWSNAKE_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/flowsnake/flowsnake.ngc"
+INSIDE_CORNERS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/inside-corners/test.ngc"
+INVERSE_TIME_WITH_COMP_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/inverse-time-with-comp/inverse.ngc"
+CCOMP_LATHE_COMP_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/lathe-comp/test.ngc"
+CCOMP_LATHE_COMP_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/lathe-comp/test.tbl"
+CCOMP_LATHE_COMP_INI="$BUILD_DIR/ccomp-lathe-comp.ini"
+CCOMP_MILL_G90G91G92_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-g90g91g92/test.ngc"
+CCOMP_MILL_G90G91G92_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-g90g91g92/test.tbl"
+CCOMP_MILL_G90G91G92_INI="$BUILD_DIR/ccomp-mill-g90g91g92.ini"
+CCOMP_MILL_LINE_ARC_ENTRY_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-line-arc-entry/test.ngc"
+CCOMP_MILL_LINE_ARC_ENTRY_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-line-arc-entry/test.tbl"
+CCOMP_MILL_LINE_ARC_ENTRY_INI="$BUILD_DIR/ccomp-mill-line-arc-entry.ini"
+CCOMP_MILL_ZCHANGES_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-zchanges/test.ngc"
+CCOMP_MILL_ZCHANGES_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/ccomp/mill-zchanges/test.tbl"
+CCOMP_MILL_ZCHANGES_INI="$BUILD_DIR/ccomp-mill-zchanges.ini"
+BAD_A_IN_CANNED_CYCLE_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/a-in-canned-cycle.ngc"
+BAD_A_IN_CANNED_CYCLE2_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/a-in-canned-cycle2.ngc"
+BAD_ARC_BIG_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.big.imperial.center-format.ngc"
+BAD_ARC_BIG_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.big.metric.center-format.ngc"
+BAD_ARC_MEDIUM_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.medium.imperial.center-format.ngc"
+BAD_ARC_MEDIUM_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.medium.metric.center-format.ngc"
+BAD_ARC_SMALL_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.small.imperial.center-format.ngc"
+BAD_ARC_SMALL_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/bad-arc.small.metric.center-format.ngc"
+BAD_CCOMP_ARCEXIT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/ccomp-arcexit.ngc"
+BAD_CCOMP_GOUGING_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/ccomp-gouging.ngc"
 BAD_EXISTS_1_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/exists-1.ngc"
 BAD_EXISTS_2_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/exists-2.ngc"
 BAD_EXISTS_3_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/exists-3.ngc"
@@ -31,6 +59,21 @@ BAD_NO_IJR_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/no-ijr.ngc"
 BAD_PROBE_NO_AXES_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/bad/probe-no-axes.ngc"
 G33_1_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g33.1/g33.1.ngc"
 G6164_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g6164/test.ngc"
+GOOD_ARC_BIG_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.big.imperial.center-format.ngc"
+GOOD_ARC_BIG_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.big.metric.center-format.ngc"
+GOOD_ARC_MEDIUM_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.medium.imperial.center-format.ngc"
+GOOD_ARC_MEDIUM_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.medium.metric.center-format.ngc"
+GOOD_ARC_SMALL_IMPERIAL_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.small.imperial.center-format.ngc"
+GOOD_ARC_SMALL_METRIC_CENTER_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/good/good-arc.small.metric.center-format.ngc"
+G72_FACING_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g72-facing/g72-iterations-present.ngc"
+G72_MISSING_ITERATION_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g72-missing-iteration/g72-iterations-missing.ngc"
+G71_ENDLESS_LOOP_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g71-endless-loop/g71-endless-loop.ngc"
+G71_ENDLESS_LOOP2_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g71-endless-loop2/g71-endless-loop2.ngc"
+G71_ENDLESS_LOOP_2_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g71-endless-loop_2/g71-endless-loop_2.ngc"
+G71_WITH_G70_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g71-with-g70/g71-with-g70.ngc"
+G76_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g76/g76only.ngc"
+G76_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g76/test.tbl"
+G76_INI="$BUILD_DIR/g76.ini"
 ROTATION_ABS_PTS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/rotation/abs-pts/test.ngc"
 ROTATION_G28_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/rotation/g28/g28.ngc"
 ROTATION_G53_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/rotation/g53/g53.ngc"
@@ -55,12 +98,46 @@ M19_INI="$ROOT_DIR/vendor/linuxcnc/tests/interp/m19/test.ini"
 MAGIC_COMMENTS_PARAM_FORMAT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/magic_comments/param_format_printing/test.ngc"
 M98M99_01_BASICS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/01-basics/test.ngc"
 M98M99_02_VARIABLES_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/02-variables/test.ngc"
+M98M99_03_ERROR_M98_NO_P_WORD_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/03-error-M98-no-P-word/test.ngc"
+M98M99_04_M98_BUT_NO_SUB_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/04-M98-but-no-sub/test.ngc"
+M98M99_05_M98_LOOPS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/05-M98-loops/test.ngc"
+M98M99_06_CALLED_WITH_O_CALL_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/06-error-mixed-sub-styles/O...-called-with-O..._call.ngc"
+M98M99_06_ENDED_WITH_O_ENDSUB_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/06-error-mixed-sub-styles/O...-ended-with-O..._endsub.ngc"
+M98M99_06_SUB_CALLED_WITH_M98_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/06-error-mixed-sub-styles/O...-sub-called-with-M98.ngc"
+M98M99_06_SUB_ENDED_WITH_M99_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/06-error-mixed-sub-styles/O...-sub-ended-with-M99.ngc"
 M98M99_07_NESTED_SUBS_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/07-nested-subs/test.ngc"
 M98M99_08_SUB_FOLLOWS_MAIN_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/08-sub-follows-main/test.ngc"
+M98M99_09_FANUC_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/09-disable-fanuc-subs/test-fanuc.ngc"
+M98M99_09_RS274NGC_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/09-disable-fanuc-subs/test-rs274ngc.ngc"
+M98M99_09_FANUC_INI="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/09-disable-fanuc-subs/test-fanuc.ini"
+M98M99_09_NO_FANUC_INI="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/09-disable-fanuc-subs/test-no-fanuc.ini"
 M98M99_10_M98_P001_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/10-M98-P001/test.ngc"
+M98M99_11_LEGAL_M2_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m2.ngc"
+M98M99_11_LEGAL_M02_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m02.ngc"
+M98M99_11_LEGAL_M30_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m30.ngc"
+M98M99_11_LEGAL_PERCENT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-percent.ngc"
+M98M99_11_ILLEGAL_EOF_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-end-main-with-eof.ngc"
+M98M99_11_ILLEGAL_NO_M30_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-no-m30-before-osub.ngc"
+M98M99_11_ILLEGAL_SUB_AFTER_PERCENT_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/11-main-program-oword/test-illegal-sub-after-percent.ngc"
 M98M99_13_NAMED_PROGRAM_NAMED_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/13-named-program/test-named.ngc"
 M98M99_13_NAMED_PROGRAM_NUMBERED_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/13-named-program/test-numbered.ngc"
 M98M99_14_O_EXPRESSION_CALL_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/m98m99/14-o-expression-call/test.ngc"
+G10_L1_L10_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l1-l10/test.ngc"
+G10_L1_L10_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l1-l10/test.tbl"
+G10_L1_L10_INI="$BUILD_DIR/g10-l1-l10.ini"
+G10_L11_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l11/test.ngc"
+G10_L11_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l11/test.tbl"
+G10_L11_INI="$BUILD_DIR/g10-l11.ini"
+G10_L2_WHILE_ACTIVE_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l2-while-active/test.ngc"
+G10_L20_WHILE_ACTIVE_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-l20-while-active/test.ngc"
+G10_WITH_G92_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-with-g92/test.ngc"
+G10_WITH_G92_TOOL_TABLE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g10/g10-with-g92/test.tbl"
+G10_WITH_G92_INI="$BUILD_DIR/g10-with-g92.ini"
+G52_G92_INTERACTION_FIXTURE="$ROOT_DIR/vendor/linuxcnc/tests/interp/g52/g52-g92-interaction/g52-g92-interaction.ngc"
+G92_PERSISTENCE_FIXTURE="$BUILD_DIR/g92-persistence.ngc"
+G92_PERSISTENCE_PARAMETER_FILE="$BUILD_DIR/g92-persistence.var"
+G92_PERSISTENCE_INI="$BUILD_DIR/g92-persistence.ini"
+G92_PERSISTENCE_DISABLED_INI="$BUILD_DIR/g92-persistence-disabled.ini"
 SIM_AXIS_FOAM_FIXTURE="$ROOT_DIR/../linuxcnc/configs/sim/axis/foam/foam.ngc"
 SIM_AXIS_FOAM_INI="$ROOT_DIR/../linuxcnc/configs/sim/axis/foam/axis_foam.ini"
 SIM_BRIDGEMILL_FIXTURE="$ROOT_DIR/../linuxcnc/configs/sim/axis/vismach/5axis/bridgemill/5axisgui.ngc"
@@ -220,6 +297,72 @@ write_command_file() {
   printf '%q\n' "$@" > "$file"
 }
 
+write_file_if_changed() {
+  local file="$1"
+  local tmp
+  tmp="$(mktemp)"
+  cat > "$tmp"
+  if [[ -f "$file" ]] && cmp -s "$tmp" "$file"; then
+    rm -f "$tmp"
+    return 0
+  fi
+  mv "$tmp" "$file"
+}
+
+write_ccomp_ini() {
+  local file="$1"
+  local tool_table="$2"
+
+  write_file_if_changed "$file" <<EOF
+[EMCIO]
+TOOL_TABLE = $tool_table
+[TRAJ]
+COORDINATES = X Y Z A B C U V W
+EOF
+}
+
+write_tool_table_ini() {
+  local file="$1"
+  local tool_table="$2"
+
+  write_file_if_changed "$file" <<EOF
+[EMCIO]
+TOOL_TABLE = $tool_table
+[TRAJ]
+COORDINATES = X Y Z A B C U V W
+EOF
+}
+
+write_g92_persistence_files() {
+  write_file_if_changed "$G92_PERSISTENCE_FIXTURE" <<EOF
+(PRINT,Startup G92 params: #5210 #5211 #5212 #5213)
+M30
+EOF
+
+  write_file_if_changed "$G92_PERSISTENCE_PARAMETER_FILE" <<EOF
+5210 1
+5211 1.25
+5212 2.5
+5213 3.75
+5220 1
+EOF
+
+  write_file_if_changed "$G92_PERSISTENCE_INI" <<EOF
+[RS274NGC]
+PARAMETER_FILE = $(basename "$G92_PERSISTENCE_PARAMETER_FILE")
+[TRAJ]
+COORDINATES = X Y Z
+EOF
+
+  write_file_if_changed "$G92_PERSISTENCE_DISABLED_INI" <<EOF
+[RS274NGC]
+PARAMETER_FILE = $(basename "$G92_PERSISTENCE_PARAMETER_FILE")
+DISABLE_G92_PERSISTENCE = 1
+[TRAJ]
+COORDINATES = X Y Z
+EOF
+}
+
 command_matches() {
   local file="$1"
   shift
@@ -1479,8 +1622,32 @@ run_interp_minimal_fixture interp_exists "$EXISTS_FIXTURE"
 run_interp_minimal_fixture return_value "$RETURN_VALUE_FIXTURE"
 run_interp_minimal_fixture subs_follow_main "$SUBS_FOLLOW_MAIN_FIXTURE"
 run_interp_minimal_fixture fractional_linenumbers "$FRACTIONAL_LINENUMBERS_FIXTURE"
+run_interp_minimal_fixture cam_nisley_bare "$CAM_NISLEY_FIXTURE"
+write_tool_table_ini "$CAM_NISLEY_INI" "$CAM_NISLEY_TOOL_TABLE"
+run_interp_minimal_fixture cam_nisley "$CAM_NISLEY_FIXTURE" "$CAM_NISLEY_INI"
+run_interp_minimal_fixture crazy_paths "$CRAZY_PATHS_FIXTURE"
 run_interp_minimal_fixture namedparam_bug424 "$NAMEDPARAM_BUG424_FIXTURE"
 run_interp_minimal_fixture flowsnake "$FLOWSNAKE_FIXTURE"
+run_interp_minimal_fixture inside_corners "$INSIDE_CORNERS_FIXTURE"
+run_interp_minimal_fixture inverse_time_with_comp "$INVERSE_TIME_WITH_COMP_FIXTURE"
+write_ccomp_ini "$CCOMP_LATHE_COMP_INI" "$CCOMP_LATHE_COMP_TOOL_TABLE"
+write_ccomp_ini "$CCOMP_MILL_G90G91G92_INI" "$CCOMP_MILL_G90G91G92_TOOL_TABLE"
+write_ccomp_ini "$CCOMP_MILL_LINE_ARC_ENTRY_INI" "$CCOMP_MILL_LINE_ARC_ENTRY_TOOL_TABLE"
+write_ccomp_ini "$CCOMP_MILL_ZCHANGES_INI" "$CCOMP_MILL_ZCHANGES_TOOL_TABLE"
+run_interp_minimal_fixture ccomp_lathe_comp "$CCOMP_LATHE_COMP_FIXTURE" "$CCOMP_LATHE_COMP_INI"
+run_interp_minimal_fixture ccomp_mill_g90g91g92 "$CCOMP_MILL_G90G91G92_FIXTURE" "$CCOMP_MILL_G90G91G92_INI"
+run_interp_minimal_fixture ccomp_mill_line_arc_entry "$CCOMP_MILL_LINE_ARC_ENTRY_FIXTURE" "$CCOMP_MILL_LINE_ARC_ENTRY_INI"
+run_interp_minimal_fixture ccomp_mill_zchanges "$CCOMP_MILL_ZCHANGES_FIXTURE" "$CCOMP_MILL_ZCHANGES_INI"
+run_interp_minimal_fixture bad_a_in_canned_cycle "$BAD_A_IN_CANNED_CYCLE_FIXTURE"
+run_interp_minimal_fixture bad_a_in_canned_cycle2 "$BAD_A_IN_CANNED_CYCLE2_FIXTURE"
+run_interp_minimal_fixture bad_arc_big_imperial_center_format "$BAD_ARC_BIG_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_arc_big_metric_center_format "$BAD_ARC_BIG_METRIC_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_arc_medium_imperial_center_format "$BAD_ARC_MEDIUM_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_arc_medium_metric_center_format "$BAD_ARC_MEDIUM_METRIC_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_arc_small_imperial_center_format "$BAD_ARC_SMALL_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_arc_small_metric_center_format "$BAD_ARC_SMALL_METRIC_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture bad_ccomp_arcexit "$BAD_CCOMP_ARCEXIT_FIXTURE"
+run_interp_minimal_fixture bad_ccomp_gouging "$BAD_CCOMP_GOUGING_FIXTURE"
 run_interp_minimal_fixture bad_exists_1 "$BAD_EXISTS_1_FIXTURE"
 run_interp_minimal_fixture bad_exists_2 "$BAD_EXISTS_2_FIXTURE"
 run_interp_minimal_fixture bad_exists_3 "$BAD_EXISTS_3_FIXTURE"
@@ -1494,6 +1661,20 @@ run_interp_minimal_fixture bad_no_ijr "$BAD_NO_IJR_FIXTURE"
 run_interp_minimal_fixture bad_probe_no_axes "$BAD_PROBE_NO_AXES_FIXTURE"
 run_interp_minimal_fixture g33_1 "$G33_1_FIXTURE"
 run_interp_minimal_fixture g6164 "$G6164_FIXTURE"
+run_interp_minimal_fixture g72_facing "$G72_FACING_FIXTURE"
+run_interp_minimal_fixture g72_missing_iteration "$G72_MISSING_ITERATION_FIXTURE"
+run_interp_minimal_fixture g71_endless_loop "$G71_ENDLESS_LOOP_FIXTURE"
+run_interp_minimal_fixture g71_endless_loop2 "$G71_ENDLESS_LOOP2_FIXTURE"
+run_interp_minimal_fixture g71_endless_loop_2 "$G71_ENDLESS_LOOP_2_FIXTURE"
+run_interp_minimal_fixture g71_with_g70 "$G71_WITH_G70_FIXTURE"
+write_tool_table_ini "$G76_INI" "$G76_TOOL_TABLE"
+run_interp_minimal_fixture g76 "$G76_FIXTURE" "$G76_INI"
+run_interp_minimal_fixture good_arc_big_imperial_center_format "$GOOD_ARC_BIG_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture good_arc_big_metric_center_format "$GOOD_ARC_BIG_METRIC_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture good_arc_medium_imperial_center_format "$GOOD_ARC_MEDIUM_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture good_arc_medium_metric_center_format "$GOOD_ARC_MEDIUM_METRIC_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture good_arc_small_imperial_center_format "$GOOD_ARC_SMALL_IMPERIAL_CENTER_FORMAT_FIXTURE"
+run_interp_minimal_fixture good_arc_small_metric_center_format "$GOOD_ARC_SMALL_METRIC_CENTER_FORMAT_FIXTURE"
 run_interp_minimal_fixture rotation_abs_pts "$ROTATION_ABS_PTS_FIXTURE"
 run_interp_minimal_fixture rotation_g28 "$ROTATION_G28_FIXTURE"
 run_interp_minimal_fixture rotation_g53 "$ROTATION_G53_FIXTURE"
@@ -1509,12 +1690,44 @@ run_interp_minimal_fixture m19 "$M19_FIXTURE" "$M19_INI"
 run_interp_minimal_fixture magic_comments_param_format "$MAGIC_COMMENTS_PARAM_FORMAT_FIXTURE"
 run_interp_minimal_fixture m98m99_01_basics "$M98M99_01_BASICS_FIXTURE"
 run_interp_minimal_fixture m98m99_02_variables "$M98M99_02_VARIABLES_FIXTURE"
+run_interp_minimal_fixture m98m99_03_error_m98_no_p_word "$M98M99_03_ERROR_M98_NO_P_WORD_FIXTURE"
+run_interp_minimal_fixture m98m99_04_m98_but_no_sub "$M98M99_04_M98_BUT_NO_SUB_FIXTURE"
+run_interp_minimal_fixture m98m99_05_m98_loops "$M98M99_05_M98_LOOPS_FIXTURE"
+run_interp_minimal_fixture m98m99_06_called_with_o_call "$M98M99_06_CALLED_WITH_O_CALL_FIXTURE"
+run_interp_minimal_fixture m98m99_06_ended_with_o_endsub "$M98M99_06_ENDED_WITH_O_ENDSUB_FIXTURE"
+run_interp_minimal_fixture m98m99_06_sub_called_with_m98 "$M98M99_06_SUB_CALLED_WITH_M98_FIXTURE"
+run_interp_minimal_fixture m98m99_06_sub_ended_with_m99 "$M98M99_06_SUB_ENDED_WITH_M99_FIXTURE"
 run_interp_minimal_fixture m98m99_07_nested_subs "$M98M99_07_NESTED_SUBS_FIXTURE"
 run_interp_minimal_fixture m98m99_08_sub_follows_main "$M98M99_08_SUB_FOLLOWS_MAIN_FIXTURE"
+run_interp_minimal_fixture m98m99_09_fanuc_ini "$M98M99_09_FANUC_FIXTURE" "$M98M99_09_FANUC_INI"
+run_interp_minimal_fixture m98m99_09_rs274ngc_ini "$M98M99_09_RS274NGC_FIXTURE" "$M98M99_09_FANUC_INI"
+run_interp_minimal_fixture m98m99_09_fanuc_no_fanuc "$M98M99_09_FANUC_FIXTURE" "$M98M99_09_NO_FANUC_INI"
+run_interp_minimal_fixture m98m99_09_rs274ngc_no_fanuc "$M98M99_09_RS274NGC_FIXTURE" "$M98M99_09_NO_FANUC_INI"
+run_interp_minimal_fixture m98m99_09_fanuc_default "$M98M99_09_FANUC_FIXTURE"
+run_interp_minimal_fixture m98m99_09_rs274ngc_default "$M98M99_09_RS274NGC_FIXTURE"
 run_interp_minimal_fixture m98m99_10_m98_p001 "$M98M99_10_M98_P001_FIXTURE"
+run_interp_minimal_fixture m98m99_11_legal_m2 "$M98M99_11_LEGAL_M2_FIXTURE"
+run_interp_minimal_fixture m98m99_11_legal_m02 "$M98M99_11_LEGAL_M02_FIXTURE"
+run_interp_minimal_fixture m98m99_11_legal_m30 "$M98M99_11_LEGAL_M30_FIXTURE"
+run_interp_minimal_fixture m98m99_11_legal_percent "$M98M99_11_LEGAL_PERCENT_FIXTURE"
+run_interp_minimal_fixture m98m99_11_illegal_eof "$M98M99_11_ILLEGAL_EOF_FIXTURE"
+run_interp_minimal_fixture m98m99_11_illegal_no_m30 "$M98M99_11_ILLEGAL_NO_M30_FIXTURE"
+run_interp_minimal_fixture m98m99_11_illegal_sub_after_percent "$M98M99_11_ILLEGAL_SUB_AFTER_PERCENT_FIXTURE"
 run_interp_minimal_fixture m98m99_13_named_program_named "$M98M99_13_NAMED_PROGRAM_NAMED_FIXTURE"
 run_interp_minimal_fixture m98m99_13_named_program_numbered "$M98M99_13_NAMED_PROGRAM_NUMBERED_FIXTURE"
 run_interp_minimal_fixture m98m99_14_o_expression_call "$M98M99_14_O_EXPRESSION_CALL_FIXTURE"
+write_tool_table_ini "$G10_L1_L10_INI" "$G10_L1_L10_TOOL_TABLE"
+write_tool_table_ini "$G10_L11_INI" "$G10_L11_TOOL_TABLE"
+write_tool_table_ini "$G10_WITH_G92_INI" "$G10_WITH_G92_TOOL_TABLE"
+run_interp_minimal_fixture g10_l1_l10 "$G10_L1_L10_FIXTURE" "$G10_L1_L10_INI"
+run_interp_minimal_fixture g10_l11 "$G10_L11_FIXTURE" "$G10_L11_INI"
+run_interp_minimal_fixture g10_l2_while_active "$G10_L2_WHILE_ACTIVE_FIXTURE"
+run_interp_minimal_fixture g10_l20_while_active "$G10_L20_WHILE_ACTIVE_FIXTURE"
+run_interp_minimal_fixture g10_with_g92 "$G10_WITH_G92_FIXTURE" "$G10_WITH_G92_INI"
+run_interp_minimal_fixture g52_g92_interaction "$G52_G92_INTERACTION_FIXTURE"
+write_g92_persistence_files
+run_interp_minimal_fixture g92_persistence_enabled "$G92_PERSISTENCE_FIXTURE" "$G92_PERSISTENCE_INI"
+run_interp_minimal_fixture g92_persistence_disabled "$G92_PERSISTENCE_FIXTURE" "$G92_PERSISTENCE_DISABLED_INI"
 run_interp_minimal_fixture sim_axis_foam "$SIM_AXIS_FOAM_FIXTURE" "$SIM_AXIS_FOAM_INI" continue_on_error
 run_interp_minimal_fixture sim_bridgemill "$SIM_BRIDGEMILL_FIXTURE" "$SIM_BRIDGEMILL_INI" continue_on_error
 run_interp_minimal_fixture sim_geometry_xyzc "$SIM_GEOMETRY_XYZC_FIXTURE" "$SIM_GEOMETRY_XYZC_INI" continue_on_error

wasm-port/tools/extract_sources.sh

@@ -32,9 +32,29 @@ if [[ ! -f "$MANIFEST_FILE" ]]; then
   exit 1
 fi
 
+validate_manifest_path() {
+  local src_rel="$1"
+  if [[ "$src_rel" = /* || "$src_rel" == */ || "$src_rel" == *"//"* ]]; then
+    return 1
+  fi
+
+  local component
+  local -a path_components
+  IFS=/ read -r -a path_components <<< "$src_rel"
+  for component in "${path_components[@]}"; do
+    if [[ -z "$component" || "$component" == "." || "$component" == ".." ]]; then
+      return 1
+    fi
+  done
+}
+
 while IFS= read -r src_rel; do
   [[ -z "$src_rel" ]] && continue
   [[ "${src_rel:0:1}" == "#" ]] && continue
+  if ! validate_manifest_path "$src_rel"; then
+    echo "invalid manifest path: $src_rel" >&2
+    exit 1
+  fi
   copy_file "$src_rel"
 done < "$MANIFEST_FILE"
 

wasm-port/tools/source-manifest.txt

@@ -233,15 +233,45 @@ tests/interp/m98m99/01-basics/test.sh
 tests/interp/m98m99/02-variables/expected
 tests/interp/m98m99/02-variables/test.ngc
 tests/interp/m98m99/02-variables/test.sh
+tests/interp/m98m99/03-error-M98-no-P-word/expected
+tests/interp/m98m99/03-error-M98-no-P-word/test.ngc
+tests/interp/m98m99/03-error-M98-no-P-word/test.sh
+tests/interp/m98m99/04-M98-but-no-sub/expected
+tests/interp/m98m99/04-M98-but-no-sub/test.ngc
+tests/interp/m98m99/04-M98-but-no-sub/test.sh
+tests/interp/m98m99/05-M98-loops/expected
+tests/interp/m98m99/05-M98-loops/test.ngc
+tests/interp/m98m99/05-M98-loops/test.sh
+tests/interp/m98m99/06-error-mixed-sub-styles/O...-called-with-O..._call.ngc
+tests/interp/m98m99/06-error-mixed-sub-styles/O...-ended-with-O..._endsub.ngc
+tests/interp/m98m99/06-error-mixed-sub-styles/O...-sub-called-with-M98.ngc
+tests/interp/m98m99/06-error-mixed-sub-styles/O...-sub-ended-with-M99.ngc
+tests/interp/m98m99/06-error-mixed-sub-styles/expected
+tests/interp/m98m99/06-error-mixed-sub-styles/test.sh
 tests/interp/m98m99/07-nested-subs/expected
 tests/interp/m98m99/07-nested-subs/test.ngc
 tests/interp/m98m99/07-nested-subs/test.sh
 tests/interp/m98m99/08-sub-follows-main/expected
 tests/interp/m98m99/08-sub-follows-main/test.ngc
 tests/interp/m98m99/08-sub-follows-main/test.sh
+tests/interp/m98m99/09-disable-fanuc-subs/expected
+tests/interp/m98m99/09-disable-fanuc-subs/test-fanuc.ini
+tests/interp/m98m99/09-disable-fanuc-subs/test-fanuc.ngc
+tests/interp/m98m99/09-disable-fanuc-subs/test-no-fanuc.ini
+tests/interp/m98m99/09-disable-fanuc-subs/test-rs274ngc.ngc
+tests/interp/m98m99/09-disable-fanuc-subs/test.sh
 tests/interp/m98m99/10-M98-P001/expected
 tests/interp/m98m99/10-M98-P001/test.ngc
 tests/interp/m98m99/10-M98-P001/test.sh
+tests/interp/m98m99/11-main-program-oword/expected
+tests/interp/m98m99/11-main-program-oword/test-illegal-end-main-with-eof.ngc
+tests/interp/m98m99/11-main-program-oword/test-illegal-no-m30-before-osub.ngc
+tests/interp/m98m99/11-main-program-oword/test-illegal-sub-after-percent.ngc
+tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m02.ngc
+tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m2.ngc
+tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-m30.ngc
+tests/interp/m98m99/11-main-program-oword/test-legal-end-main-with-percent.ngc
+tests/interp/m98m99/11-main-program-oword/test.sh
 tests/interp/m98m99/13-named-program/expected
 tests/interp/m98m99/13-named-program/test-named.ngc
 tests/interp/m98m99/13-named-program/test-numbered.ngc
@@ -276,6 +306,14 @@ tests/interp/fractional-linenumbers/README
 tests/interp/fractional-linenumbers/expected
 tests/interp/fractional-linenumbers/test.ngc
 tests/interp/fractional-linenumbers/test.sh
+tests/interp/cam-nisley/cam.ngc
+tests/interp/cam-nisley/expected
+tests/interp/cam-nisley/test.sh
+tests/interp/cam-nisley/test.tbl
+tests/interp/crazy-paths/README
+tests/interp/crazy-paths/expected
+tests/interp/crazy-paths/test.ngc
+tests/interp/crazy-paths/test.sh
 tests/interp/namedparam-bug424/README
 tests/interp/namedparam-bug424/expected
 tests/interp/namedparam-bug424/test.ngc
@@ -284,6 +322,40 @@ tests/interp/flowsnake/README
 tests/interp/flowsnake/expected
 tests/interp/flowsnake/flowsnake.ngc
 tests/interp/flowsnake/test.sh
+tests/interp/inside-corners/README
+tests/interp/inside-corners/expected
+tests/interp/inside-corners/test.ngc
+tests/interp/inside-corners/test.sh
+tests/interp/inverse-time-with-comp/README
+tests/interp/inverse-time-with-comp/expected
+tests/interp/inverse-time-with-comp/inverse.ngc
+tests/interp/inverse-time-with-comp/test.sh
+tests/ccomp/lathe-comp/expected
+tests/ccomp/lathe-comp/test.ngc
+tests/ccomp/lathe-comp/test.sh
+tests/ccomp/lathe-comp/test.tbl
+tests/ccomp/mill-g90g91g92/expected
+tests/ccomp/mill-g90g91g92/test.ngc
+tests/ccomp/mill-g90g91g92/test.sh
+tests/ccomp/mill-g90g91g92/test.tbl
+tests/ccomp/mill-line-arc-entry/expected
+tests/ccomp/mill-line-arc-entry/test.ngc
+tests/ccomp/mill-line-arc-entry/test.sh
+tests/ccomp/mill-line-arc-entry/test.tbl
+tests/ccomp/mill-zchanges/expected
+tests/ccomp/mill-zchanges/test.ngc
+tests/ccomp/mill-zchanges/test.sh
+tests/ccomp/mill-zchanges/test.tbl
+tests/interp/bad/a-in-canned-cycle.ngc
+tests/interp/bad/a-in-canned-cycle2.ngc
+tests/interp/bad/bad-arc.big.imperial.center-format.ngc
+tests/interp/bad/bad-arc.big.metric.center-format.ngc
+tests/interp/bad/bad-arc.medium.imperial.center-format.ngc
+tests/interp/bad/bad-arc.medium.metric.center-format.ngc
+tests/interp/bad/bad-arc.small.imperial.center-format.ngc
+tests/interp/bad/bad-arc.small.metric.center-format.ngc
+tests/interp/bad/ccomp-arcexit.ngc
+tests/interp/bad/ccomp-gouging.ngc
 tests/interp/bad/exists-1.ngc
 tests/interp/bad/exists-2.ngc
 tests/interp/bad/exists-3.ngc
@@ -301,6 +373,56 @@ tests/interp/g33.1/test.sh
 tests/interp/g6164/expected
 tests/interp/g6164/test.ngc
 tests/interp/g6164/test.sh
+tests/interp/good/good-arc.big.imperial.center-format.ngc
+tests/interp/good/good-arc.big.metric.center-format.ngc
+tests/interp/good/good-arc.medium.imperial.center-format.ngc
+tests/interp/good/good-arc.medium.metric.center-format.ngc
+tests/interp/good/good-arc.small.imperial.center-format.ngc
+tests/interp/good/good-arc.small.metric.center-format.ngc
+tests/interp/g72-facing/expected
+tests/interp/g72-facing/g72-iterations-present.ngc
+tests/interp/g72-facing/test.sh
+tests/interp/g72-missing-iteration/expected
+tests/interp/g72-missing-iteration/g72-iterations-missing.ngc
+tests/interp/g72-missing-iteration/test.sh
+tests/interp/g71-endless-loop/expected
+tests/interp/g71-endless-loop/g71-endless-loop.ngc
+tests/interp/g71-endless-loop/test.sh
+tests/interp/g71-endless-loop2/expected
+tests/interp/g71-endless-loop2/g71-endless-loop2.ngc
+tests/interp/g71-endless-loop2/test.sh
+tests/interp/g71-endless-loop_2/expected
+tests/interp/g71-endless-loop_2/g71-endless-loop_2.ngc
+tests/interp/g71-endless-loop_2/test.sh
+tests/interp/g71-with-g70/expected
+tests/interp/g71-with-g70/g71-with-g70.ngc
+tests/interp/g71-with-g70/test.sh
+tests/interp/g76/README
+tests/interp/g76/expected
+tests/interp/g76/g76only.ngc
+tests/interp/g76/test.sh
+tests/interp/g76/test.tbl
+tests/interp/g10/g10-l1-l10/expected
+tests/interp/g10/g10-l1-l10/test.ngc
+tests/interp/g10/g10-l1-l10/test.sh
+tests/interp/g10/g10-l1-l10/test.tbl
+tests/interp/g10/g10-l11/expected
+tests/interp/g10/g10-l11/test.ngc
+tests/interp/g10/g10-l11/test.sh
+tests/interp/g10/g10-l11/test.tbl
+tests/interp/g10/g10-l2-while-active/expected
+tests/interp/g10/g10-l2-while-active/test.ngc
+tests/interp/g10/g10-l2-while-active/test.sh
+tests/interp/g10/g10-l20-while-active/expected
+tests/interp/g10/g10-l20-while-active/test.ngc
+tests/interp/g10/g10-l20-while-active/test.sh
+tests/interp/g10/g10-with-g92/expected
+tests/interp/g10/g10-with-g92/test.ngc
+tests/interp/g10/g10-with-g92/test.sh
+tests/interp/g10/g10-with-g92/test.tbl
+tests/interp/g52/g52-g92-interaction/expected
+tests/interp/g52/g52-g92-interaction/g52-g92-interaction.ngc
+tests/interp/g52/g52-g92-interaction/test.sh
 tests/interp/rotation/abs-pts/expected
 tests/interp/rotation/abs-pts/test.ngc
 tests/interp/rotation/abs-pts/test.sh

wasm-port/tools/verify_vendor_sync.sh

@@ -24,6 +24,22 @@ if [[ ! -f "$MANIFEST_FILE" ]]; then
   exit 1
 fi
 
+validate_manifest_path() {
+  local src_rel="$1"
+  if [[ "$src_rel" = /* || "$src_rel" == */ || "$src_rel" == *"//"* ]]; then
+    return 1
+  fi
+
+  local component
+  local -a path_components
+  IFS=/ read -r -a path_components <<< "$src_rel"
+  for component in "${path_components[@]}"; do
+    if [[ -z "$component" || "$component" == "." || "$component" == ".." ]]; then
+      return 1
+    fi
+  done
+}
+
 mkdir -p "$BUILD_DIR"
 
 vendor_sync_fingerprint() {
@@ -65,7 +81,7 @@ while IFS= read -r src_rel; do
   [[ -z "$src_rel" ]] && continue
   [[ "${src_rel:0:1}" == "#" ]] && continue
 
-  if [[ "$src_rel" = /* || "$src_rel" == *".."* ]]; then
+  if ! validate_manifest_path "$src_rel"; then
     echo "invalid manifest path: $src_rel" >&2
     exit 1
   fi