按推荐建议，继续执行

结论：已为 LinuxCNC genserkins 增加 native runtime baseline，并保持 Go math 通过窄 C++ wrapper 复用 vendored gomath.c，完整 native 验证通过。

wasm-port/docs/drift-report.md

@@ -29,7 +29,8 @@ semantic rewrites:
 | Python/remap | Python/remap hooks are stubbed at the runtime edge. |
 | Dynamic interpreter path | `interp_base.cc` probe uses standalone `EMC2_HOME` compile-time path boundary. |
 | Realtime scheduler | TP probes seed deterministic status/config data instead of running LinuxCNC realtime process topology. |
-| Kinematics component lifecycle | `trivkins.c`, `5axiskins.c`, and TRT switchkins modules are initialized through LinuxCNC module entry points while HAL component init/ready/exit, HAL pin allocation, and RTAPI module metadata are handled by standalone shims. |
+| Kinematics component lifecycle | Kinematics modules are initialized through LinuxCNC module entry points where native runtime probes exist, while HAL component init/ready/exit, HAL pin allocation, and RTAPI module metadata are handled by standalone shims. |
+| Go math C/C++ linkage | `genserkins` runtime probing compiles vendored `gomath.c` through a narrow C++ wrapper so LinuxCNC `genserfuncs.c` can link to the upstream Go math symbols without editing vendored source. |
 | Browser storage | OPFS remains outside the native core and is not yet connected. |
 
 ## Enforced Non-Drift Rules
@@ -51,8 +52,8 @@ semantic rewrites:
   serial, hexapod, pentapod, and related kinematics sources now have native
   source-probe coverage.
 - Full machine baselines beyond the current identity/trivial, `5axiskins`,
-  TRT, delta, SCARA, PUMA, and other existing runtime probes are not
-  established.
+  TRT, delta, SCARA, PUMA, serial `genserkins`, and other existing runtime
+  probes are not established.
 - Fixture expectations are currently checked against the standalone vendored
   source path, not by running a native LinuxCNC binary for every fixture.
 

wasm-port/docs/source-reuse-map.md

@@ -38,7 +38,7 @@ Current validation is intentionally mechanical:
 | Identity/trivial kinematics | `src/emc/kinematics/kinematics.h`, `cubic.h`, `kins_util.c`, `trivkins.c` | Copy unchanged | HAL component lifecycle and RTAPI module metadata are replaced by standalone shims; forward/inverse mapping behavior remains LinuxCNC source | Vendor byte sync, per-file source probes, `linuxcnc_kinematics_probe` |
 | Switchable 5-axis bridge kinematics | `src/emc/kinematics/5axiskins.c`, `switchkins.c`, `switchkins.h`, `userkfuncs.c`, plus `src/rtapi/rtapi_ctype.h` | Copy unchanged | HAL pin allocation, HAL component lifecycle, and RTAPI module metadata are standalone runtime edges; switchable 5-axis forward/inverse behavior remains LinuxCNC source | Vendor byte sync, per-file source probes, `linuxcnc_5axis_kinematics_probe` |
 | TRT table-rotary kinematics | `src/emc/kinematics/trtfuncs.c`, `xyzac-trt-kins.c`, `xyzbc-trt-kins.c` | Copy unchanged | HAL pin allocation and switchkins lifecycle stay runtime boundaries; XYZAC/XYZBC TRT forward/inverse behavior remains LinuxCNC source | Vendor byte sync, per-file source probes, `linuxcnc_xyzac_trt_kinematics_probe`, `linuxcnc_xyzbc_trt_kinematics_probe` |
-| Additional non-switchable kinematics | `src/emc/kinematics/corexykins.c`, `rotatekins.c`, `rosekins.c`, `maxkins.c`, `lineardeltakins.c`, `lineardeltakins-common.h`, `rotarydeltakins.c`, `rotarydeltakins-common.h`, `scorbot-kins.c`, `tripodkins.c`, `scarakins.c`, `pumakins.c`, `pumakins.h`, `genhexkins.c`, `genhexkins.h`, `genserfuncs.c`, `genserkins.c`, `genserkins.h`, `ugenserkins.c`, `pentakins.c`, `pentakins.h`, `cubic.c` | Copy unchanged | HAL pin allocation, HAL parameter allocation, HAL component lifecycle, RTAPI module metadata, and userspace test-program process entry remain standalone runtime edges; forward/inverse behavior remains LinuxCNC source where the module exposes it | Vendor byte sync, per-file source probes, `linuxcnc_corexy_kinematics_probe`, `linuxcnc_rotate_kinematics_probe`, `linuxcnc_rose_kinematics_probe`, `linuxcnc_max_kinematics_probe`, `linuxcnc_lineardelta_kinematics_probe`, `linuxcnc_rotarydelta_kinematics_probe`, `linuxcnc_scorbot_kinematics_probe`, `linuxcnc_tripod_kinematics_probe`, `linuxcnc_scara_kinematics_probe`, `linuxcnc_puma_kinematics_probe` |
+| Additional non-switchable kinematics | `src/emc/kinematics/corexykins.c`, `rotatekins.c`, `rosekins.c`, `maxkins.c`, `lineardeltakins.c`, `lineardeltakins-common.h`, `rotarydeltakins.c`, `rotarydeltakins-common.h`, `scorbot-kins.c`, `tripodkins.c`, `scarakins.c`, `pumakins.c`, `pumakins.h`, `genhexkins.c`, `genhexkins.h`, `genserfuncs.c`, `genserkins.c`, `genserkins.h`, `ugenserkins.c`, `pentakins.c`, `pentakins.h`, `cubic.c` | Copy unchanged | HAL pin allocation, HAL parameter allocation, HAL component lifecycle, RTAPI module metadata, Go math C/C++ linkage, and userspace test-program process entry remain standalone runtime edges; forward/inverse behavior remains LinuxCNC source where the module exposes it | Vendor byte sync, per-file source probes, `linuxcnc_corexy_kinematics_probe`, `linuxcnc_rotate_kinematics_probe`, `linuxcnc_rose_kinematics_probe`, `linuxcnc_max_kinematics_probe`, `linuxcnc_lineardelta_kinematics_probe`, `linuxcnc_rotarydelta_kinematics_probe`, `linuxcnc_scorbot_kinematics_probe`, `linuxcnc_tripod_kinematics_probe`, `linuxcnc_scara_kinematics_probe`, `linuxcnc_puma_kinematics_probe`, `linuxcnc_genser_kinematics_probe` |
 | Trajectory planner | `src/emc/tp/tp.c`, `tc.c`, `tcq.c`, `spherical_arc.c`, `blendmath.c`, `sp_scurve.c`, `ruckig_wrapper.c`, plus matching `*.h` files | Copy unchanged | Native realtime scheduling and motion process state are replaced by standalone probe setup | Vendor byte sync, per-file source probes, `linuxcnc_tp_api_probe` |
 | Ruckig C planner support | Selected `src/emc/tp/cruckig/*.c` and `*.h` files in the manifest | Copy unchanged | Used as LinuxCNC planner support code through vendored TP sources | Vendor byte sync, per-file source probes |
 | Posemath | `src/libnml/posemath/posemath.cc`, `_posemath.c`, `gomath.c`, `sincos.c`, and matching headers | Copy unchanged | `gomath.c` is compiled as C; `rtapi.h` shim is C/C++ compatible for this boundary | Vendor byte sync, per-file source probes, TP probe |
@@ -63,8 +63,9 @@ Current validation is intentionally mechanical:
 ## Known Gaps
 
 - Additional non-trivial kinematics implementation files are now extracted at
-  source-probe level. Full runtime machine baselines for serial, hexapod,
-  pentapod, and userspace genser flows are not yet established.
+  source-probe level. Serial `genserkins` has a native runtime baseline; full
+  runtime machine baselines for hexapod, pentapod, and userspace genser flows
+  are not yet established.
 - Browser/WASM C ABI and JS SDK layers are not yet built for the full
   interpreter/planner core.
 - OPFS persistence is not yet connected to INI, tool table, parameter file, or