提交 xyzbc-trt 界面与验证更新

web-rtcp-5axis-xyzbc-trt-sim-plan/app/dist/linuxcnc/nc_files/skeleton.ngc

@@ -0,0 +1,22 @@
+(program skeleton for use as basis for NC programs)
+N0010 G17 G20 G40 G49 (XY plane select, inch mode, cancel diameter comp, cancel length offset)
+N0020 G54 G80 G90 G94 (coordinate system 1, cancel motion, non-incremental motion, feed/minute mode)
+N0030 G53 G0 Z0 (temporarily cancel offsets, retract quill)
+N0040 X0 Y0 (move X and Y to the tool change position, change as required)
+N0050 M05 M09 (spindle and coolant off)
+(display a message for the operator)
+N0060 (MSG,Load tool #1)
+N0070 M00 (don't move until the operator presses the S key)
+N0080 T1 M06 G43 H1 (change to tool 1 and get its length from the tool table)
+(start G0 lines with a .001 second pause to avoid motion blending problems)
+N0090 G04 P.001 G0 X1.0 Y1.0 S1000 M3 M8 (rapid to the starting XY, spindle CW, coolant ON, change as required)
+N0100 G04 P.001 G0 Z0.25 (rapid to .25" above the part, change as required)
+N0110 G0 Z0.25 (rapid to .25" above the part, change as required)
+N0120 M05 M09 (spindle and coolant off)
+N0130 G53 G0 Z0 (temporarily cancel offsets, retract quill)
+N0140 X0. Y0. (move X and Y to the tool change position, change as required)
+N0150 T0 M6 (remove tool)
+N0160 (MSG,Remove tool)
+N0170 M00 (don't do anything until operator presses the S key)
+N0180 G49 (cancel length offset)
+N0150 M2 (end program)