wasm-port: expand canonical runtime edge fixtures

wasm-port/tests/fixtures/canon/canon_runtime_edges.events

@@ -9,3 +9,25 @@ canon_event=FLOOD_ON
 canon_event=MIST_OFF
 canon_event=FLOOD_OFF
 canon_event=DWELL seconds=0.25
+canon_event=ENABLE_FEED_OVERRIDE
+canon_event=ENABLE_SPEED_OVERRIDE spindle=0
+canon_event=DISABLE_FEED_OVERRIDE
+canon_event=ENABLE_FEED_OVERRIDE
+canon_event=DISABLE_SPEED_OVERRIDE spindle=0
+canon_event=ENABLE_SPEED_OVERRIDE spindle=0
+canon_event=DISABLE_ADAPTIVE_FEED
+canon_event=ENABLE_ADAPTIVE_FEED
+canon_event=DISABLE_FEED_HOLD
+canon_event=ENABLE_FEED_HOLD
+canon_event=SET_MOTION_OUTPUT_BIT index=3
+canon_event=CLEAR_MOTION_OUTPUT_BIT index=3
+canon_event=SET_AUX_OUTPUT_BIT index=4
+canon_event=CLEAR_AUX_OUTPUT_BIT index=4
+canon_event=SET_MOTION_OUTPUT_VALUE index=2 value=12.5
+canon_event=SET_AUX_OUTPUT_VALUE index=2 value=34.5
+canon_event=WAIT index=1 input_type=1 wait_type=0 timeout=0
+canon_event=PROGRAM_STOP
+canon_event=SET_FEED_RATE rate=0
+canon_event=STOP_SPINDLE_TURNING spindle=0
+canon_event=SET_SPINDLE_MODE spindle=0 css_max=0
+canon_event=PROGRAM_END

wasm-port/tests/fixtures/gcode/canon_runtime_edges.ngc

@@ -6,3 +6,21 @@ M7
 M8
 M9
 G4 P0.25
+M48
+M50 P0
+M50 P1
+M51 P0
+M51 P1
+M52 P0
+M52 P1
+M53 P0
+M53 P1
+M62 P3
+M63 P3
+M64 P4
+M65 P4
+M67 E2 Q12.5
+M68 E2 Q34.5
+M66 P1 L0 Q0
+M0
+M2

wasm-port/tests/native/verify_native_probes.sh

@@ -97,6 +97,7 @@ check_fixture_output() {
     local line_number
     for ((line_number = 1; line_number <= line_count; line_number += 1)); do
       if ! grep -Fq "execute_line_${line_number}=0" "$stdout_file" &&
+         ! grep -Fq "execute_line_${line_number}=1" "$stdout_file" &&
          ! grep -Fq "execute_line_${line_number}=2" "$stdout_file"; then
         echo "missing successful execute status for line $line_number in $stdout_file" >&2
         exit 1