wangdequan/cnc_wams
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

按建议，继续完成后续工作

Browse Source 
结论：将 GET_EXTERNAL_FEED_RATE 接入 canonical feed 状态，并用 G20/G21 长度单位 fixture 验证回读。
This commit is contained in:
wangdequan
2026-06-08 00:07:55 +08:00
parent bdbe246a82
commit 0b70bb0aa8
6 changed files with 11 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
wasm-port/docs/compatibility-validation.md
View File

@@ -54,7 +54,7 @@ The validation fails if:
| `linuxcnc_interp_state_probe` | Validates interpreter state constants and structs compile under the standalone boundary. |
| `linuxcnc_emc_status_probe` | Validates the standalone `emcStatus` machine-units status boundary used by vendored interpreter conversion and initialization code. |
| `linuxcnc_namedparam_harness` | Validates LinuxCNC named parameter behavior, `_ini[...]`, and `_hal[...]` adapter resolution. |
| `linuxcnc_interp_minimal_harness` | Runs G-code fixtures through vendored LinuxCNC parser/execution/conversion code and captures canonical events. |
| `linuxcnc_interp_minimal_harness` | Runs G-code fixtures through vendored LinuxCNC parser/execution/conversion code, captures canonical events, and validates feed-rate state readback across length-unit changes. |
| `linuxcnc_parameter_file_harness` | Validates LinuxCNC parameter file restore/save behavior and required/read-only parameter handling. |
| `linuxcnc_interp_init_harness` | Validates vendored LinuxCNC `Interp::init()` emits canonical initialization boundaries, reads metric/inch machine units, and synchronizes current/selected tool slots through standalone status adapters. |
| `linuxcnc_indexer_harness` | Validates vendored LinuxCNC single-axis rotary indexer dispatch emits lock/unlock and motion boundaries through the standalone event sink. |
@@ -123,7 +123,8 @@ machine-session validation remain future work.
The current fixture expectations validate standalone behavior against both the
vendored LinuxCNC source path and an upstream `rs274` side-by-side baseline for
parser/conversion, arc geometry, offsets, feed-control, comment/logging,
parser/conversion, arc geometry, offsets, feed-control and feed-state
readback, comment/logging,
numbered-parameter, probing, spindle-orient, file-open reset, file-finish,
tool-reload, tool select/change/length-offset, canned-cycle, state-tag motion,
tool-table setup, and O-word subroutine fixtures, plus threading/rigid tap,