X

# axis.ngc - AXIS 2.9.8 on LinuxCNC-BROWSER-SIM

⌃−□×
Speed
Step 0/0 0%
Simulation loading LinuxCNC interpreter WASM
Axis: X Y Z
Spindle:
Coolant: Mist Flood
Feed Override:
Rapid Override:
Spindle Override:
Jog Speed:
17 in/min
Max Velocity:
240 in/min
Active G-Codes:
G80 G17 G40 G20 G90 G94 G54 G49 G99 G64
G97 G91.1 G8 M5 M9 M48 M53 M0 F0 S0
MDI command entry will run only through LinuxCNC-backed WASM once connected.
X 0.000
Y 0.000
Z 0.000
A 0.000
B 0.000
C 0.000

X:0.000 DTG X:n/a
Y:0.000 DTG Y:n/a
Z:0.000 DTG Z:n/a
G54 X:n/a G92 X:n/a
G54 Y:n/a G92 Y:n/a
G54 Z:n/a G92 Z:n/a
TLO X:n/a Vel:n/a
TLO Y:n/a TLO Z:n/a
Program: Executed through the LinuxCNC-backed WASM interpreter. | Source: loading Active line -
Machine State Statement -

Motion | Line | Position | Statement
--- | --- | --- | ---

Run Status
  loading
Statement
  -