项目整体完成情况与后续执行计划

生成时间：2026-06-15 CST

本文件接替 `text11.txt`。后续工作按 `text12.txt` 执行；除非明确要求审计旧记录，
不要再回到 `text1/text2/text3/text4/text5/text6/text7/text8/text9/text10/text11`
扩展进度。`text11.txt` 作为历史归档保留。

一、第一原则：加快实质性推进

后续批次必须以“实质性能力优先”为第一遵守原则。

1. 优先级从高到低：

- OPFS/session persistence；
- SDK/API surface；
- browser/UI workflow；
- sim config coverage promotion；
- host/runtime boundary proof；
- 文档化可执行工作流。

2. 每批默认应产出至少一种可直接复用的能力：

- 可调用 helper；
- 可复用 API；
- 可验证用户流程；
- 可执行 gate；
- 可提升覆盖面的 runtime boundary proof；
- 能直接指导下一步实现的设计/清单。

3. 暂停低收益推进：

- 不再把“局部常量化、路径变量收敛、断言分组整理”作为主目标；
- 只有当它支撑可复用 workflow/API/gate 时，才允许做测试胶水；
- 禁止为了推进而扩大 CNC 语义边界；
- 禁止启动性能测试，除非已有明确用户流程需要性能基线。

4. LinuxCNC 仍是唯一 CNC 语义来源：

- G-code、remap、tool、parameter、planner、kinematics、user-M、tool DB、Python remap
  等语义必须来自 LinuxCNC upstream 或 vendored LinuxCNC C/C++/配置/脚本源码；
- JS/browser 只允许做 build、source sync、runtime shim、filesystem staging、OPFS、
  WASM/browser boundary、测试胶水、文档和机器可读 gate/artifact；
- 不在 JS 中重写 G-code 或 CNC 语义；
- 不修改 vendored LinuxCNC 源文件来让测试通过；
- 不把 full-process/HAL/UI/Python/tool DB 依赖伪装成 standalone pass；
- 不把 expected failure 硬改成 pass，除非已有 LinuxCNC-owned runtime proof，并且
  native、Node、browser gate 都按顺序通过；
- browser 不能依赖目录枚举。

二、续接状态与防重规则

1. 当前续接点。

`text11.txt` 已推进到：

```text
二十四、2026-06-15 继续执行记录：INI panel control-page refresh workflow helper
```

该批已提交：

```text
ed5d03e 推进 INI 面板 control-page refresh workflow helper
```

本文件从 `text12.txt` 重新开始记录后续进度。

2. 每轮开始前必须先执行：

```bash
git status --short
git log -5 --oneline
tail -n 120 text12.txt
awk '/^[一二三四五六七八九十百]+、/ {print}' text12.txt | sort | uniq -d
```

执行规则：

- 如果 `git status --short` 是 clean，且最新提交已经包含当前建议工作，不要重复追加记录；
- 每轮只追加一个新的中文编号记录；
- 提交前再次检查标题唯一性；
- `text12.txt` 只记录新的后续进度，不复制 `text11.txt` 的长历史；
- 每批完成后，如果要写记录，先写 `text12.txt`，再提交该批代码和记录；
- 如果发现重复记录，先做 dedupe 清理并提交，再继续新功能或新 guard；
- `text11.txt` 不再追加新进度，除非明确要求审计或修正历史记录。

三、当前完成情况摘要

1. 当前工作树状态。

切换到 `text12.txt` 前已确认：

```text
git status --short: clean
```

当前最近提交：

```text
ed5d03e 推进 INI 面板 control-page refresh workflow helper
213514f 推进 INI 面板 shell view-model helper
b330f7b 推进 INI 面板 launcher link view-model helper
ac46345 推进 INI 面板 entry docs strict gate
ef4769b 推进 INI 面板 entry doc
```

2. 关键基线保持稳定。

- `linuxcnc/nc_files` native Layer 1：
  - `total 107`
  - `pass 101`
  - `expected_fail 6`
  - `unexpected_fail 0`
- `linuxcnc/configs/sim` native Layer 2：
  - `total 159`
  - `pass 151`
  - `expected_fail 8`
  - `unexpected_fail 0`
- Node sim-config inventory：
  - `executed=28`
  - `passed=28`
  - `skipped=131`
  - `unexpected_fail=0`

3. blocked runtime family 仍未 promotion。

仍 blocked，不允许 promotion：

- `L4-USER-M-PROCESS`
- `L4-TOOL-DB`
- `L4-PYTHON-REMAP`

当前 host 仍按缺少 LinuxCNC host runtime 处理，不执行任何：

```bash
ENABLE_MILLTURN_USER_M_RUNTIME_PROBE=1 bash wasm-port/tests/native/probe_millturn_user_m_runtime.sh
ENABLE_TOOL_DB_RUNTIME_PROBE=1 bash wasm-port/tests/native/probe_tool_db_runtime.sh
ENABLE_PYTHON_REMAP_RUNTIME_PROBE=1 bash wasm-port/tests/native/probe_python_remap_runtime.sh
```

四、当前实质能力进展

1. INI panel/UI helper 能力。

当前 UI helper 已覆盖：

- run summary；
- run workflow；
- session snapshot summary；
- session load summary；
- machine file save/load summary；
- panel state summary；
- session snapshot save/restore workflow；
- entry manifest、launcher link view-model、shell view-model；
- read-only control-page controller；
- read-only control-page refresh workflow。

当前聚合验证入口：

```bash
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
```

当前 `verify_ui_node_smokes.sh` 覆盖：

```text
ini_panel_run_summary_node_smoke=ok
ini_panel_run_workflow_node_smoke=ok
ini_panel_session_summary_node_smoke=ok
ini_panel_session_workflow_node_smoke=ok
ini_panel_machine_file_summary_node_smoke=ok
ini_panel_state_summary_node_smoke=ok
ini_panel_control_page_controller_node_smoke=ok
ini_panel_control_page_refresh_workflow_node_smoke=ok
ini_panel_entry_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
```

2. Browser/UI workflow 验证。

当前 browser INI panel smoke 覆盖真实 OPFS/session persistence workflow：

```bash
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
```

关键输出：

```text
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
```

五、当前必须保持通过的验证入口

每批后续改动至少运行：

```bash
git diff --check
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
wasm-port/tests/host/verify_host_smokes.sh
```

如果涉及 browser interpreter smoke，再运行：

```bash
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_interp_browser.sh
```

涉及 native baseline 或大范围 source/staging 改动时，再运行：

```bash
wasm-port/tests/native/verify_nc_files.sh
wasm-port/tests/native/verify_sim_configs.sh
```

六、下一步建议

继续推进 OPFS/session persistence 的实质链路。下一批建议抽出
`loadMachineSessionForControlPageWorkflow()` 或等价 helper，让 read-only control page 能以明确
状态模型描述 embedded panel API readiness 和首帧 session state；仍保持只读，不新增控制按钮，
不解析 G-code。

一、2026-06-15 继续执行记录：INI panel control-page session readiness workflow helper

本轮按“第一原则：加快实质性推进”切换到 `text12.txt` 续接，并推进 OPFS/session
persistence 相关 browser/UI workflow：新增 read-only control-page session readiness workflow，
让外层页面能以明确状态模型读取 embedded panel API readiness 和首帧 session state。

完成内容：

- 新建 `text12.txt`，接替 `text11.txt`；后续记录从本文件继续；
- 新增 `wasm-port/runtime/ui/ini-panel/control-page-session-workflow.js`；
- 新增 `createControlPageSessionLoadState(input)`，固定 control-page session load 状态结构；
- 新增 `loadMachineSessionForControlPageWorkflow(input)`，统一描述：
  - `waiting-panel`：embedded panel frame 尚不可读；
  - `waiting-api`：panel window 可读但 API 尚未暴露；
  - `waiting-session`：API 已可读但 control view 尚未就绪；
  - `ready`：state bundle、workflow status 和 control view 可读取；
  - `error`：读取 panel window/API/control view 时失败；
- `createMachineSessionControlPageController()` 新增 `loadSessionState()`；
- `control-page.js` 对浏览器页面暴露 `loadControlPageSessionState`；
- `ui-shell.js` re-export session readiness workflow helper，并在
  `createIniPanelShellViewModel()` 中暴露 `controlPage.loadSessionState`；
- 新增 `wasm-port/tests/ui/node/verify_ini_panel_control_page_session_workflow.mjs` 和 `.sh`；
- `verify_ui_node_smokes.sh` 纳入 session readiness workflow smoke；
- browser control-page smoke 验证 `loadControlPageSessionState().phase === "ready"`；
- `panel-entry.md` 和 entry docs gate 同步记录 session readiness workflow API；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_control_page_session_workflow.sh
wasm-port/tests/ui/node/verify_ini_panel_control_page_controller.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_control_page_session_workflow_node_smoke=ok
ini_panel_control_page_controller_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence 的实质链路。下一批建议把 `load-session` 按钮路径抽成
`loadMachineSessionIntoWasmWorkflow()`，统一返回 loaded session、load summary、field state 和
log lines；仍保持由 LinuxCNC/OPFS bridge 执行实际语义，不在 JS 中解释 CNC 行为。

二、2026-06-15 继续执行记录：INI panel load-session workflow helper

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence 主链路，抽出
`load-session` 按钮路径的可复用 workflow helper，统一返回 loaded session、load summary、
field state 和 log lines。

完成内容：

- `wasm-port/runtime/ui/ini-panel/session-workflow.js` 新增
  `createMachineSessionLoadFieldState(summary)`；
- `session-workflow.js` 新增 `machineSessionLoadWorkflowLogLines(summary)`；
- `session-workflow.js` 新增 `loadMachineSessionIntoWasmWorkflow({ loadSession })`；
- workflow 只调用外部传入的 LinuxCNC/OPFS session loader，并基于现有
  `createMachineSessionLoadSummary()` 生成 UI 状态；
- `wasm-port/runtime/ui/ini-panel/app.js` 的 `load-session` handler 改为调用
  `loadMachineSessionIntoWasmWorkflow()`；
- `app.js` 仍由 `loadMachineSessionFromOpfs()` 通过 LinuxCNC/OPFS bridge 执行实际 session
  staging；
- `wasm-port/tests/ui/node/verify_ini_panel_session_workflow.mjs` 覆盖 load workflow 的
  loader 调用、summary、field state、log lines 和缺失 loader 错误；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_session_workflow.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_session_workflow_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence 的实质链路。下一批建议将 `restore-load-session` 路径改为复用
`loadMachineSessionIntoWasmWorkflow()`，避免 restore+load 与单独 load 的 field/log 状态模型
分叉；仍保持由 LinuxCNC/OPFS bridge 执行实际语义，不在 JS 中解释 CNC 行为。

三、2026-06-15 继续执行记录：INI panel restore-load workflow 复用 load-session helper

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence 主链路，将
`restore-load-session` 路径收敛到已存在的 `loadMachineSessionIntoWasmWorkflow()`，让单独
load 与 restore+load 共享同一套 load summary、field state 和 log lines 模型。

完成内容：

- `restoreMachineSessionSnapshotWorkflow()` 的 restore+load 分支改为调用
  `loadMachineSessionIntoWasmWorkflow({ loadSession })`；
- restore+load 返回的 `loadedSession`、`loadSummary` 和 INI/parameter/tool-table field state
  直接来自 load workflow；
- restore+load 日志纳入 load workflow 的统一首行：
  `Loaded machine session into the interpreter WASM filesystem.`；
- 删除 `app.js` 中已不再使用的 `sessionSnapshotSummaryLogLines` import；
- `verify_ini_panel_session_workflow.mjs` 增加 restore+load 复用断言，确认
  `loadSummary` 与单独 load workflow 一致，且 `loadedSession` 保持 loader 返回对象；
- `ui-session-summary-helpers.md` 同步说明 restore-load 复用 load workflow；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_session_workflow.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_session_workflow_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence 的实质链路。下一批建议抽出 `run-session` 首帧 readiness
或 run 前置状态 helper，把“已加载 session、已选择/恢复 snapshot、默认 G-code 路径、run
按钮可执行条件”统一成可复用状态模型；仍保持只描述 UI/host boundary facts，不在 JS 中解释
G-code、canonical events 或 CNC 运行语义。

四、2026-06-15 继续执行记录：INI panel run readiness workflow helper

本轮按“第一原则：加快实质性推进”继续推进 run 前置状态模型，将 run 按钮可执行条件、
默认/快照 G-code 选择结果与已加载 session 的 WASM 绑定关系抽成可复用 readiness helper，
让 app、state summary、control view 和 Node smoke 共享同一份运行前状态。

完成内容：

- 新增 `wasm-port/runtime/ui/ini-panel/run-workflow.js` 的
  `createRunSessionReadinessState(input)`；
- `runGcodeSessionWorkflow()` 现在先生成 readiness state，再复用其中的选定程序和 loaded
  session 信息执行实际 run；
- readiness state 固定返回：
  - `phase`
  - `canRun`
  - `missing`
  - `loadedSession`
  - `snapshot`
  - `defaultProgram`
  - `program`
  - `runButton`
- `wasm-port/runtime/ui/ini-panel/app.js` 在点击 Run 前先写入 readiness state，并把
  `selectedProgram`、`runReadiness` 和 field state 一起更新到 panel state；
- `wasm-port/runtime/ui/ini-panel/panel-state-summary.js` 新增 `runReadiness` 的 report /
  workflowStatus / control-view 映射；
- `createMachineSessionControlView()` 的 Run 区新增 `Ready` 与 `Button` 行，用于 read-only
  control page 读取首帧 run 前置状态；
- `wasm-port/tests/ui/node/verify_ini_panel_run_workflow.mjs` 覆盖 readiness helper 与
  workflow readiness 返回值；
- `wasm-port/tests/ui/node/verify_ini_panel_state_summary.mjs` 覆盖 runReadiness 在 report、
  bundle、workflowStatus 和 control view 中的映射；
- `wasm-port/docs/ui-run-summary-helpers.md` 和 `wasm-port/docs/ui-panel-state-summary.md`
  同步说明 readiness helper 与 runReadiness 状态；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_run_workflow.sh
wasm-port/tests/ui/node/verify_ini_panel_state_summary.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_run_workflow_node_smoke=ok
ini_panel_state_summary_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence 的实质链路。下一批建议将 `load-session` 与
`restore-load-session` 的 field/log 路径再做一次轻量整合，优先把“已加载 session、快照恢复、
run readiness、run 结果”汇总成一个更上层的只读工作流状态对象；仍保持只描述 UI/host
boundary facts，不在 JS 中解释 G-code、canonical events 或 CNC 运行语义。

五、2026-06-15 继续执行记录：INI panel workflow overview helper

本轮按“第一原则：加快实质性推进”继续推进更上层只读工作流状态对象，将已归一化的
report、run readiness、session snapshot/load、run result 和 control page 需要的状态字段
再压成单一 workflow overview，供 state bundle、workflow status 和 read-only control view
共享。

完成内容：

- 新增 `wasm-port/runtime/ui/ini-panel/panel-state-summary.js` 的
  `createMachineSessionWorkflowOverview(report)`；
- `createMachineSessionWorkflowStatus()` 现在额外返回 `overview`；
- `createMachineSessionStateBundle()` 现在额外返回 `overview`；
- `createMachineSessionControlView()` 新增 `Workflow` 区，显示：
  - `Phase`
  - `Missing`
  - `Last action`
  - `Error`
- overview 只组合已有的 readiness、session、loaded、runReadiness、run 和 status 信息；
- `Missing` 现在优先基于 loaded session / run readiness 的已知边界事实判断，不再依赖 DOM；
- `wasm-port/tests/ui/node/verify_ini_panel_state_summary.mjs` 覆盖 overview helper、bundle、
  workflow status 和 control view；
- `wasm-port/tests/ui/node/verify_ini_panel_control_page_session_workflow.mjs` 同步带上 overview；
- `wasm-port/docs/ui-panel-state-summary.md` 同步说明 overview helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_state_summary.sh
wasm-port/tests/ui/node/verify_ini_panel_control_page_session_workflow.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_state_summary_node_smoke=ok
ini_panel_control_page_session_workflow_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence 的实质链路。下一批建议把 `load-session`、`restore-load-session`
和 `run` 的状态入口再向上收拢成一个稳定的只读状态 API，优先服务 control page 和 shell 的
统一读取；仍保持只描述 UI/host boundary facts，不在 JS 中解释 G-code、canonical events 或
CNC 运行语义。

六、2026-06-15 继续执行记录：INI panel readonly status API

本轮按“第一原则：加快实质性推进”继续把 control page / shell 的状态入口向上收拢，新增稳定的
read-only status API，让外层 UI 能一次读取 state bundle、workflow status、overview、control view、
session、run readiness 和 run 结果。

完成内容：

- 新增 `wasm-port/runtime/ui/ini-panel/readonly-status-api.js`；
- 新增 `createMachineSessionReadonlyStatus(input)`，固定只读状态对象 shape；
- 新增 `readMachineSessionReadonlyStatus({ getPanelApi, getControlView })`，通过现有 panel API
  读取 `stateBundle`、`workflowStatus` 和 `controlView`；
- `createMachineSessionControlPageController()` 新增 `readStatus()`；
- `ui-shell.js` re-export readonly status API；
- `createIniPanelShellViewModel()` 的 `controlPage` 新增 `readStatus`；
- 新增 `wasm-port/tests/ui/node/verify_ini_panel_readonly_status_api.mjs` 和 `.sh`；
- `verify_ui_node_smokes.sh` 纳入 readonly status API smoke；
- `verify_ini_panel_control_page_controller.mjs` 覆盖 controller `readStatus()`；
- `verify_ini_panel_ui_shell.mjs` 覆盖 shell export、view-model 和 controller 读取路径；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录新 API；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_readonly_status_api.sh
wasm-port/tests/ui/node/verify_ini_panel_control_page_controller.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_readonly_status_api_node_smoke=ok
ini_panel_control_page_controller_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把 readonly status API 的 shape 写入一个轻量 SDK-facing
入口或 manifest，方便外部页面稳定发现 `readStatus()`、`loadSessionState()`、`refresh()` 和
`renderView()`；仍保持只描述 UI/host boundary facts，不在 JS 中解释 G-code、canonical events
或 CNC 运行语义。

七、2026-06-15 继续执行记录：INI panel readonly status API manifest

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，把 readonly status API 的 shape
写入轻量 manifest，方便外部页面稳定发现 `readStatus()`、`loadSessionState()`、`refresh()` 和
`renderView()`。

完成内容：

- `wasm-port/runtime/ui/ini-panel/readonly-status-api.js` 新增
  `createMachineSessionReadonlyStatusApiManifest()`；
- manifest 固定返回：
  - `apiName`
  - `methods.readStatus`
  - `relatedControlPageMethods`
  - `statusFields`
- `ui-shell.js` re-export `createMachineSessionReadonlyStatusApiManifest()`；
- `createIniPanelShellViewModel()` 的 `controlPage` 新增 `readonlyStatusApiManifest`；
- `verify_ini_panel_readonly_status_api.mjs` 覆盖 manifest shape；
- `verify_ini_panel_ui_shell.mjs` 覆盖 shell view-model 中的 manifest 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录 manifest 入口；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_readonly_status_api.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_readonly_status_api_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_interp_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 shell-facing API 增加一个 focused contract smoke，
直接校验 `createIniPanelShellViewModel().controlPage` 的所有方法名、manifest 字段和只读边界，
使外部页面接入前能运行一个快速 contract gate；仍保持只描述 UI/host boundary facts，不在 JS
中解释 G-code、canonical events 或 CNC 运行语义。

八、2026-06-15 继续执行记录：INI panel shell control-page contract helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为 shell-facing control-page API
增加可复用 contract helper 和 focused contract gate，使外部页面接入前能快速校验方法名、
manifest 字段和只读边界。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `createIniPanelShellControlPageContract()`；
- `createIniPanelShellViewModel().controlPage` 新增 `contract`；
- contract 固定描述：
  - `methodNames`
  - `readonlyStatusApiManifest`
  - `readonlyStatusApiMethodNames`
  - `readonlyStatusApiStatusFields`
  - `relatedControlPageMethods`
- 新增 `verify_ini_panel_shell_control_page_contract.mjs/.sh` focused contract smoke；
- `verify_ui_node_smokes.sh` 接入 shell control-page contract smoke；
- `verify_ini_panel_ui_shell.mjs` 与 `verify_ini_panel_entry_docs.mjs` 覆盖 contract 暴露；
- `docs/panel-entry.md` 记录 `createIniPanelShellControlPageContract()` 和
  `controlPage.contract`；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_control_page_contract.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_control_page_contract_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议让 browser control-page smoke 读取并校验
`createIniPanelShellViewModel().controlPage.contract` 或等价 browser-exposed contract，
把 Node 端 contract gate 延伸到真实嵌入页面流程；仍保持只读，不新增控制按钮，不解析 G-code，
不解释 canonical events。

九、2026-06-15 继续执行记录：INI panel browser control-page contract exposure

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 Node 端 shell control-page
contract 延伸到真实 browser iframe 流程，使 `control-page.html` 暴露可读 contract，并由
browser smoke 在读取 embedded panel state 前校验 API shape。

完成内容：

- `wasm-port/runtime/ui/ini-panel/control-page.js` 引入
  `createIniPanelShellControlPageContract()`；
- `window.linuxCncIniPanelControlPageApi` 新增 `getControlPageContract()`；
- `ini_panel_control_page_smoke.html` 在真实 control-page iframe 中校验：
  - `methodNames`
  - `readonlyStatusApiManifest.apiName`
  - `readonlyStatusApiMethodNames`
  - `relatedControlPageMethods`
  - `readonlyStatusApiStatusFields`
- `docs/panel-entry.md` 记录
  `linuxCncIniPanelControlPageApi.getControlPageContract()` browser API；
- `verify_ini_panel_entry_docs.mjs` 覆盖 browser-exposed contract API 文档与源码入口；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence。下一批建议增加一个 browser control-page readonly status
snapshot smoke，直接通过 `linuxCncIniPanelControlPageApi` 读取 `readStatus()` 或等价只读状态，
并校验 save/load session 后的 `stateBundle`、`workflowStatus`、`controlView` 一致暴露；仍保持
只读，不新增控制按钮，不解析 G-code，不解释 canonical events。

十、2026-06-15 继续执行记录：INI panel browser readonly status snapshot

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence 和 browser/UI workflow，
让真实 browser control-page API 暴露只读状态 snapshot，并在 save/load session 与 run workflow
后校验 `stateBundle`、`workflowStatus`、`controlView` 一致可读。

完成内容：

- `wasm-port/runtime/ui/ini-panel/control-page.js` 在
  `window.linuxCncIniPanelControlPageApi` 新增 `readControlPageStatus()`；
- `ini_panel_control_page_smoke.html` 在真实 control-page iframe 中校验：
  - 初始 readonly status last action；
  - load-session 后 `stateBundle.report.readiness.parameterFile`；
  - load-session 后 `workflowStatus.lastAction`；
  - load-session 后 `controlView.status.lastAction`；
  - load-session 后 `session.parameterFile`；
  - run-gcode 后 readonly status `lastAction` 与 `runStatus`；
  - run-gcode 后 `workflowStatus` 与 `controlView` 一致暴露；
- `docs/panel-entry.md` 记录
  `linuxCncIniPanelControlPageApi.readControlPageStatus()` browser API；
- `verify_ini_panel_entry_docs.mjs` 覆盖 browser readonly status API 文档与源码入口；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 LinuxCNC interpreter、tool、parameter、planner 或 LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 browser control-page API 增加一个轻量 manifest 或
`getControlPageApiMethods()`，明确 `getControlPageContract()`、`readControlPageStatus()`、
`loadControlPageSessionState()`、`refreshControlPage()`、`renderControlPage()` 的 browser-exposed
方法清单，并由 Node/browser gate 双向校验；仍保持只读，不新增控制按钮，不解析 G-code。

十一、2026-06-15 继续执行记录：INI panel browser control-page API methods manifest

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为真实 browser control-page API
增加轻量方法清单，使外部页面能先发现 browser-exposed 方法，再调用只读 contract、status、
session load 与 refresh/render workflow。

完成内容：

- `wasm-port/runtime/ui/ini-panel/control-page.js` 新增
  `createControlPageBrowserApiMethods()`；
- `window.linuxCncIniPanelControlPageApi` 新增 `getControlPageApiMethods()`；
- browser-exposed 方法清单固定包含：
  - `getControlPageApiMethods`
  - `getControlPageContract`
  - `getControlView`
  - `getPanelApi`
  - `loadControlPageSessionState`
  - `readControlPageStatus`
  - `refreshControlPage`
  - `renderControlPage`
- `ini_panel_control_page_smoke.html` 在真实 control-page iframe 中校验方法清单与 namespace
  实际函数一致；
- `docs/panel-entry.md` 记录
  `linuxCncIniPanelControlPageApi.getControlPageApiMethods()` browser API；
- `verify_ini_panel_entry_docs.mjs` 覆盖 browser API methods helper、源码入口和文档入口；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 browser control-page API methods manifest 纳入
launch page 或 shell view-model 暴露，让入口页也能展示/消费可用 read-only control-page API
清单；仍保持只读，不新增控制按钮，不解析 G-code，不解释 canonical events。

十二、2026-06-15 继续执行记录：INI panel launch exposes control-page API methods

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 browser control-page API
methods manifest 纳入 shell view-model 和 launch page，使入口页也能消费可用 read-only
control-page API 清单，而不需要先加载 control-page iframe。

完成内容：

- `createControlPageBrowserApiMethods()` 从 `control-page.js` 迁移到 `ui-shell.js`；
- `control-page.js` 复用 shell 侧 `createControlPageBrowserApiMethods()`；
- `createIniPanelShellViewModel().controlPage` 新增 `browserApiMethods`；
- `launch.html` 改为基于 `createIniPanelShellViewModel()` 渲染 launcher links；
- `launch.html` 新增只读 `window.linuxCncIniPanelLaunchApi`：
  - `getLauncherLinks()`
  - `getControlPageApiMethods()`
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验 launch API 与 shell helper
  返回同一份 control-page browser methods 清单；
- `verify_ini_panel_ui_shell.mjs`、`verify_ini_panel_shell_control_page_contract.mjs` 和
  `verify_ini_panel_entry_docs.mjs` 覆盖 shell view-model、launch API 与文档入口；
- `docs/panel-entry.md` 记录 `linuxCncIniPanelLaunchApi.getControlPageApiMethods()`；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_control_page_contract.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_control_page_contract_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把 `linuxCncIniPanelLaunchApi` 也整理为轻量 launch API
manifest，明确 `getLauncherLinks()`、`getControlPageApiMethods()`、visible entries 和目标页面
路径，供外部 shell 在不读 DOM 的情况下发现入口；仍保持只读，不新增控制按钮，不解析 G-code。

十三、2026-06-15 继续执行记录：INI panel launch API manifest

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为 launch page 增加轻量 API
manifest，使外部 shell 可以在不读取 DOM、不加载 control-page iframe 的情况下发现入口方法、
visible entries、目标页面路径和 read-only control-page browser API 清单。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `createIniPanelLaunchApiManifest()`；
- `createIniPanelShellViewModel()` 新增 `launchApiManifest`；
- launch API manifest 固定包含：
  - `apiName`
  - `methods`
  - `visibleEntries`
  - `targetPages`
  - `controlPageApiMethods`
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增 `getLaunchApiManifest()`；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - manifest API name；
  - manifest method list；
  - visible entry count；
  - control-page target href；
  - launch API 与 shell helper 一致；
- `verify_ini_panel_ui_shell.mjs`、`verify_ini_panel_shell_control_page_contract.mjs` 和
  `verify_ini_panel_entry_docs.mjs` 覆盖 shell view-model、launch API manifest helper 与文档入口；
- `docs/panel-entry.md` 记录 `createIniPanelLaunchApiManifest()` 和
  `linuxCncIniPanelLaunchApi.getLaunchApiManifest()`；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_control_page_contract.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_control_page_contract_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议给 launch API manifest 增加一个 focused Node smoke
`verify_ini_panel_launch_api_manifest.sh`，直接校验 manifest shape、entries 深拷贝、target page
映射和 control-page API methods，避免这些能力只被大 smoke 间接覆盖；仍保持只读，不新增控制
按钮，不解析 G-code。

十四、2026-06-15 继续执行记录：INI panel launch API manifest focused gate

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，为 launch API manifest 增加
focused Node gate，直接校验 manifest shape、entries 深拷贝、target page 映射和 control-page
API methods，避免这些能力只被大 smoke 间接覆盖。

完成内容：

- 新增 `wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.mjs`；
- 新增 `wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh`；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖：
  - `apiName`
  - `methods`
  - `visibleEntries`
  - `targetPages`
  - `controlPageApiMethods`
  - manifest 深拷贝行为；
  - custom entries 的 target page 映射；
  - `launch.html` 暴露 `linuxCncIniPanelLaunchApi.getLaunchApiManifest()`；
  - `ui-shell.js` 暴露 `createIniPanelLaunchApiManifest()`；
- `verify_ui_node_smokes.sh` 接入 launch API manifest focused gate；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence。下一批建议为 launch API manifest 加入 `persistenceCapabilities`
或等价只读字段，明确 launch 入口可发现的 OPFS/session workflow 能力（如 machine files、
session snapshot、readonly status），并由 focused Node gate 与 browser launch smoke 双向校验；
仍保持只读，不新增控制按钮，不解析 G-code。

十五、2026-06-15 继续执行记录：INI panel launch persistence capabilities manifest

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence，把 launch API manifest
扩展为可发现的 persistence capabilities 清单，让入口页和外部 shell 能在不读取 DOM、不加载
control-page iframe 的情况下发现 machine files、session snapshot 和 readonly status 能力。

完成内容：

- `createIniPanelLaunchApiManifest()` 新增 `persistenceCapabilities`；
- persistence capabilities 固定包含：
  - `machine-files` / `Machine text files` / `opfs`
  - `session-snapshot` / `Machine session snapshot` / `opfs`
  - `readonly-status` / `Read-only machine session status` / `control-page`
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 persistence capabilities shape 和深拷贝行为；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验 persistence capabilities 数量、
  id 清单和 readonly status scope；
- `docs/panel-entry.md` 记录 launch manifest 中的 OPFS/session persistence capabilities；
- `verify_ini_panel_entry_docs.mjs` 覆盖文档中的 machine files、session snapshots 和
  read-only status 能力说明；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 LinuxCNC interpreter、tool、parameter、planner 或 LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 `persistenceCapabilities` 增加 stable schema helper 或
manifest version 字段（例如 `manifestVersion: 1`），由 focused Node gate、launch browser smoke
和 docs gate 共同校验，便于后续外部 shell 做兼容性判断；仍保持只读，不新增控制按钮，不解析
G-code。

十六、2026-06-15 继续执行记录：INI panel launch manifest version schema

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为 launch API manifest 增加
stable schema helper 和 `manifestVersion: 1`，便于外部 shell 在消费 launch methods、entries、
target pages、control-page API methods 与 persistence capabilities 前进行兼容性判断。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增 `createIniPanelLaunchApiSchema()`；
- `createIniPanelLaunchApiManifest()` 新增 `manifestVersion: 1`；
- schema 固定描述：
  - `apiName`
  - `manifestVersion`
  - `fields`
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 schema shape、manifest version 和
  shell view-model version；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验 `manifestVersion`；
- `verify_ini_panel_ui_shell.mjs` 覆盖 shell view-model 的 manifest version；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 记录并校验
  `createIniPanelLaunchApiSchema()` 和 `manifestVersion`；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 launch manifest 的 schema/version 信息暴露到
`linuxCncIniPanelLaunchApi` 的独立 `getLaunchApiSchema()` 方法，并由 browser launch smoke 与
focused Node gate 双向校验；仍保持只读，不新增控制按钮，不解析 G-code。

十七、2026-06-15 继续执行记录：INI panel launch API schema exposure

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 launch manifest 的
schema/version 信息通过真实 browser launch API 独立暴露，方便外部 shell 在读取完整 manifest
前先做兼容性判断。

完成内容：

- `createIniPanelShellViewModel()` 新增 `launchApiSchema`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增 `getLaunchApiSchema()`；
- `createIniPanelLaunchApiManifest().methods` 新增 `getLaunchApiSchema`；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - `getLaunchApiSchema()` 存在；
  - schema `manifestVersion`；
  - schema fields 包含 `persistenceCapabilities`；
  - manifest methods 包含 `getLaunchApiSchema`；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 shell view-model 的 `launchApiSchema`；
- `verify_ini_panel_ui_shell.mjs` 覆盖 `launchApiSchema`；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 记录并校验
  `linuxCncIniPanelLaunchApi.getLaunchApiSchema()`；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 `createIniPanelLaunchApiSchema()` 增加 focused schema
compatibility helper（例如 `isSupportedIniPanelLaunchApiManifest()` 或等价只读 predicate），让外部
shell 可以用 schema/version 判断 manifest 是否可消费，并由 Node/browser gate 校验；仍保持只读，
不新增控制按钮，不解析 G-code。

十八、2026-06-15 继续执行记录：INI panel launch manifest compatibility predicate

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为 launch manifest 增加只读
compatibility predicate，让外部 shell 能用 schema/version 和必需字段判断 manifest 是否可消费。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `isSupportedIniPanelLaunchApiManifest()`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增
  `isSupportedLaunchApiManifest()`；
- `createIniPanelLaunchApiManifest().methods` 新增 `isSupportedLaunchApiManifest`；
- predicate 固定校验：
  - manifest 是对象；
  - `apiName` 匹配 schema；
  - `manifestVersion` 匹配 schema；
  - schema fields 全部存在；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 supported、错误 version、错误 apiName、
  缺少字段和 null 输入；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验支持当前 manifest，并拒绝错误
  `manifestVersion`；
- `verify_ini_panel_ui_shell.mjs`、`verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md`
  记录并校验 predicate 入口；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 control-page browser API 也补齐 schema/version 与
compatibility predicate，使 launch API 和 control-page API 具备一致的外部 shell 接入模型；仍保持
只读，不新增控制按钮，不解析 G-code。

十九、2026-06-15 继续执行记录：INI panel control-page API manifest compatibility predicate

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 control-page browser API
补齐 schema/version、manifest 和 compatibility predicate，使 launch API 与 control-page API
具备一致的外部 shell 接入模型。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增：
  - `createControlPageBrowserApiSchema()`；
  - `createControlPageBrowserApiManifest()`；
  - `isSupportedIniPanelControlPageApiManifest()`；
- `createControlPageBrowserApiMethods()` 新增：
  - `isSupportedControlPageApiManifest`；
  - `getControlPageApiSchema`；
  - `getControlPageApiManifest`；
- `createIniPanelShellViewModel().controlPage` 新增：
  - `browserApiSchema`；
  - `browserApiManifest`；
  - `isSupportedBrowserApiManifest`；
- `control-page.js` 的 `window.linuxCncIniPanelControlPageApi` 新增真实 browser 入口：
  - `isSupportedControlPageApiManifest()`；
  - `getControlPageApiSchema()`；
  - `getControlPageApiManifest()`；
- `ini_panel_control_page_smoke.html` 在真实 control-page iframe 中校验：
  - schema `manifestVersion`；
  - schema fields 包含 `readonlyStatusApiManifest`；
  - 当前 manifest 被 predicate 接受；
  - 错误 `apiName` 被 predicate 拒绝；
  - manifest methods 与 browser API methods 一致；
  - manifest 暴露 readonly status API manifest；
- `verify_ini_panel_shell_control_page_contract.mjs` 覆盖 control-page browser API schema、
  manifest、supported、错误 version、错误 apiName、缺少字段和 null 输入；
- `verify_ini_panel_ui_shell.mjs`、`verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md`
  记录并校验 control-page browser API schema/manifest/predicate；
- launch manifest 继续通过同一 `createControlPageBrowserApiMethods()` 获取 control-page
  方法清单；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_control_page_contract.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_control_page_contract_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把 launch API 和 control-page API 的 manifest 组合成一个
可复用的 shell integration manifest（例如 `createIniPanelShellIntegrationManifest()`），让外部
shell 一次读取入口页、目标页、launch API、control-page API、OPFS/session persistence 能力与
compatibility predicate 状态；仍保持只读，不新增控制按钮，不解析 G-code。

二十、2026-06-15 继续执行记录：INI panel shell integration manifest

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，把 launch API 与 control-page API
组合成可复用的 shell integration manifest，让外部 shell 能一次读取入口页、目标页、两类 API
manifest、OPFS/session persistence 能力与 compatibility 状态。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增：
  - `createIniPanelShellIntegrationSchema()`；
  - `createIniPanelShellIntegrationManifest()`；
  - `isSupportedIniPanelShellIntegrationManifest()`；
- shell integration manifest 固定暴露：
  - `pages`；
  - `launcherLinks`；
  - `launchApiSchema`；
  - `launchApiManifest`；
  - `controlPageApiSchema`；
  - `controlPageApiManifest`；
  - `compatibility.launchApiManifest`；
  - `compatibility.controlPageApiManifest`；
  - `persistenceCapabilities`；
- `createIniPanelShellViewModel()` 新增：
  - `shellIntegrationSchema`；
  - `shellIntegrationManifest`；
  - `isSupportedShellIntegrationManifest`；
- `createIniPanelLaunchApiManifest().methods` 新增：
  - `getShellIntegrationSchema`；
  - `getShellIntegrationManifest`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口：
  - `getShellIntegrationSchema()`；
  - `getShellIntegrationManifest()`；
- 新增 `verify_ini_panel_shell_integration_manifest.mjs/.sh`，覆盖：
  - schema 固定字段；
  - manifest 完整 shape；
  - supported、错误 version、错误 apiName、缺少字段和 null 输入；
  - 修改返回对象不污染 `INI_PANEL_ENTRIES` 或后续 manifest；
  - custom entries 的 pages、launcher links 和 launch target pages；
  - 不引入 JS CNC 语义；
- `verify_ui_node_smokes.sh` 纳入 shell integration manifest focused gate；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - `getShellIntegrationSchema()`；
  - `getShellIntegrationManifest()`；
  - launch/control-page compatibility 均为 true；
  - control-page manifest 名称；
  - browser manifest 与模块 helper 结果一致；
- `verify_ini_panel_launch_api_manifest.mjs`、`verify_ini_panel_ui_shell.mjs`、
  `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence。下一批建议增加只读 shell integration readiness helper
（例如 `createIniPanelShellIntegrationReadiness()`），用 integration manifest、launch manifest 和
control-page manifest 生成外部 shell 可直接展示/拦截的 readiness 状态；仍保持只读，不新增控制
按钮，不解析 G-code。

二十一、2026-06-15 继续执行记录：INI panel shell integration readiness helper

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence 相关外部 shell 接入能力，
新增只读 shell integration readiness helper，让外部 shell 能在挂载 embedded control page 前判断
integration、launch 与 control-page manifest 是否都可消费。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `createIniPanelShellIntegrationReadiness()`；
- readiness helper 从 shell integration manifest 派生：
  - `phase: "ready" | "blocked"`；
  - `ready`；
  - `checks.integrationManifestSupported`；
  - `checks.launchApiManifestSupported`；
  - `checks.controlPageApiManifestSupported`；
  - `checks.launchCompatibility`；
  - `checks.controlPageCompatibility`；
  - `missing`；
  - `counts.pages`；
  - `counts.launcherLinks`；
  - `counts.launchMethods`；
  - `counts.controlPageMethods`；
  - `counts.persistenceCapabilities`；
  - `apiNames.integration/launch/controlPage`；
- `createIniPanelShellViewModel()` 新增：
  - `shellIntegrationReadiness`；
  - `createShellIntegrationReadiness`；
- `createIniPanelLaunchApiManifest().methods` 新增 `getShellIntegrationReadiness`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口
  `getShellIntegrationReadiness()`；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖：
  - ready 正常状态；
  - compatibility blocked 状态；
  - malformed manifest 的 blocked 状态；
  - counts 与 API names；
  - browser/doc 暴露点；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - `getShellIntegrationReadiness()` 存在；
  - readiness `ready === true`；
  - persistence capability count；
  - missing checks 为空；
- `verify_ini_panel_launch_api_manifest.mjs`、`verify_ini_panel_ui_shell.mjs`、
  `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未访问 OPFS 或启动额外 iframe；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 shell integration readiness 接到 control-page 或 launch
的外部 shell smoke 中，形成“读取 integration manifest -> readiness gate -> 打开 control page ->
读取 readonly status”的端到端只读接入 workflow；仍保持只读，不新增控制按钮，不解析 G-code。

二十二、2026-06-15 继续执行记录：INI panel shell integration browser workflow smoke

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 shell integration readiness
接入真实 browser 端到端只读外部 shell workflow，覆盖“读取 integration manifest -> readiness gate
-> 打开 control page -> 读取 readonly status”的接入链路。

完成内容：

- 新增 `wasm-port/tests/browser/ini_panel_shell_integration_workflow_smoke.html`；
- 该 browser smoke 模拟外部 shell：
  - 先加载真实 `launch.html`；
  - 读取 `linuxCncIniPanelLaunchApi.getShellIntegrationManifest()`；
  - 读取 `linuxCncIniPanelLaunchApi.getShellIntegrationReadiness()`；
  - 校验 readiness `phase === "ready"`、`ready === true`、`missing` 为空；
  - 从 integration manifest 的 target pages 找到 control-page target；
  - 加载真实 `control-page.html`；
  - 校验 control-page browser API manifest 与 integration manifest 对齐；
  - 等待 embedded INI panel API ready；
  - 通过既有 UI workflow 写入 INI、保存 machine files、load session；
  - 使用 `readControlPageStatus()` 读取 readonly machine-session status；
  - 校验 workflow last action、parameter file、tool table 与 control-page DOM status；
- `verify_ini_panel_browser.sh` 纳入新 browser smoke，并输出
  `browser_ini_shell_integration_workflow_smoke=ok`；
- `docs/panel-entry.md` 记录该 browser workflow smoke 的外部 shell handoff 目的；
- `verify_ini_panel_entry_docs.mjs` 校验：
  - 文档记录新 smoke；
  - browser 聚合脚本执行新 smoke；
  - 新 smoke 使用 `getShellIntegrationReadiness()`；
  - 新 smoke 使用 `readControlPageStatus()`；
  - 新 smoke 输出成功标记；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把 shell integration workflow 的只读 handoff 抽成 Node 可测
helper（例如 `createIniPanelShellIntegrationWorkflowPlan()`），让外部 shell 在不开 browser 的情况下
获得 target page、readiness、required methods 与 readonly status handoff plan；仍保持只读，不新增
控制按钮，不解析 G-code。

二十三、2026-06-15 继续执行记录：INI panel shell integration workflow plan helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，把 shell integration browser workflow
的只读 handoff 抽成 Node 可测 helper，让外部 shell 在不开 browser 的情况下获得 control-page target、
readiness、required methods 与 readonly status handoff plan。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `createIniPanelShellIntegrationWorkflowPlan()`；
- workflow plan 从 integration manifest 与 readiness 派生：
  - `phase: "ready" | "blocked"`；
  - `ready`；
  - `controlEntryId`；
  - `targetPage`；
  - `readiness`；
  - `requiredLaunchApiMethods`；
  - `requiredControlPageApiMethods`；
  - `missingLaunchApiMethods`；
  - `missingControlPageApiMethods`；
  - `missing`；
  - `readonlyStatusHandoff.loadSessionStateMethod`；
  - `readonlyStatusHandoff.readStatusMethod`；
  - `readonlyStatusHandoff.expectedStatusFields`；
- `createIniPanelShellViewModel()` 新增：
  - `shellIntegrationWorkflowPlan`；
  - `createShellIntegrationWorkflowPlan`；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖：
  - ready workflow plan 完整 shape；
  - blocked readiness 传递到 plan missing；
  - control target 缺失；
  - control-page required method 缺失；
  - readonly status handoff fields；
- `verify_ini_panel_ui_shell.mjs` 覆盖 shell view-model 的 workflow plan；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 记录并校验 workflow plan helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未访问 OPFS 或启动 browser/frame；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 OPFS/session persistence。下一批建议把 workflow plan 扩展为包含 session handoff summary
helper（例如 `createIniPanelShellSessionHandoffSummary()`），把 readiness、target page、readonly
status fields 与 persistence capabilities 压成外部 shell 可直接显示的一页摘要；仍保持只读，不新增
控制按钮，不解析 G-code。

二十四、2026-06-15 继续执行记录：INI panel shell session handoff summary helper

本轮按“第一原则：加快实质性推进”继续推进 OPFS/session persistence 相关外部 shell 接入能力，
新增只读 shell session handoff summary helper，把 readiness、target page、readonly status fields
与 persistence capabilities 压成外部 shell 可直接显示的一页摘要。

完成内容：

- `wasm-port/runtime/ui/ini-panel/ui-shell.js` 新增
  `createIniPanelShellSessionHandoffSummary()`；
- summary 从 integration manifest、readiness 与 workflow plan 派生：
  - `phase: "ready" | "blocked"`；
  - `ready`；
  - `targetPage`；
  - `readiness.phase`；
  - `readiness.missing`；
  - `readiness.counts`；
  - `readiness.apiNames`；
  - `persistenceCapabilities`；
  - `readonlyStatusFields`；
  - `handoffMethods.loadSessionState`；
  - `handoffMethods.readStatus`；
  - `blockingReasons`；
- `createIniPanelShellViewModel()` 新增：
  - `shellSessionHandoffSummary`；
  - `createShellSessionHandoffSummary`；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖：
  - ready handoff summary 完整 shape；
  - blocked workflow plan 的 blocking reasons；
  - persistence capabilities 与 readonly status fields 返回值不污染后续 summary；
- `verify_ini_panel_ui_shell.mjs` 覆盖 shell view-model 的 handoff summary；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 记录并校验 handoff summary helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未访问 OPFS 或启动 browser/frame；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 `shellSessionHandoffSummary` 暴露到 launch browser API
或 shell integration browser workflow smoke 中，让真实 browser 外部 shell 可以直接读取 summary
并与 readonly status handoff 结果交叉校验；仍保持只读，不新增控制按钮，不解析 G-code。

二十五、2026-06-15 继续执行记录：INI panel shell session handoff summary browser API

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把
`shellSessionHandoffSummary` 暴露到真实 launch browser API，并在 shell integration browser
workflow smoke 中用 summary 驱动 readonly status handoff。

完成内容：

- `createIniPanelLaunchApiManifest().methods` 新增 `getShellSessionHandoffSummary`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口
  `getShellSessionHandoffSummary()`；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - `getShellSessionHandoffSummary()` 存在；
  - launch API manifest methods 包含该方法；
  - summary `ready === true`；
  - summary target page 为 `./control-page.html`；
  - summary readonly fields 包含 `session`；
  - summary persistence capabilities 数量为 3；
- `ini_panel_shell_integration_workflow_smoke.html` 改为读取
  `getShellSessionHandoffSummary()`，并使用 summary 的 handoff methods 调用：
  - `loadControlPageSessionState()`；
  - `readControlPageStatus()`；
- shell integration browser workflow smoke 现在交叉校验：
  - summary target 与 integration manifest target 一致；
  - summary handoff methods 可调用；
  - summary readonly status fields 全部存在于 `readControlPageStatus()` 返回值；
  - summary persistence capabilities 与 blocking reasons；
- `verify_ini_panel_launch_api_manifest.mjs`、`verify_ini_panel_entry_docs.mjs` 与
  `docs/panel-entry.md` 同步记录和校验 browser API；
- `verify_ini_panel_shell_integration_manifest.mjs` 将 launch method count 更新为 9；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 shell/session handoff summary 增加 focused compatibility
predicate 或 versioned summary schema（例如 `createIniPanelShellSessionHandoffSummarySchema()`），
让外部 shell 能独立判断 summary shape 是否可消费；仍保持只读，不新增控制按钮，不解析 G-code。

二十六、2026-06-15 继续执行记录：INI panel shell session handoff summary schema gate

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface，为 shell/session handoff
summary 增加 versioned schema 与 focused compatibility predicate，并暴露到真实 launch browser
API，让外部 shell 能在消费 summary 前独立判断 shape 是否可支持。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffSummarySchema()`；
- `ui-shell.js` 新增 `isSupportedIniPanelShellSessionHandoffSummary()`；
- `createIniPanelShellSessionHandoffSummary()` 新增：
  - `apiName: "ini-panel-shell-session-handoff-summary"`；
  - `summaryVersion: 1`；
- `createIniPanelLaunchApiManifest().methods` 新增：
  - `getShellSessionHandoffSummarySchema`；
  - `isSupportedShellSessionHandoffSummary`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增：
  - `getShellSessionHandoffSummarySchema()`；
  - `isSupportedShellSessionHandoffSummary()`；
- `ini_panel_launch_smoke.html` 在真实 launch iframe 中校验：
  - summary schema version；
  - 当前 summary 可支持；
  - 错误 summary version 被拒绝；
- `ini_panel_shell_integration_workflow_smoke.html` 在 browser shell handoff workflow 中校验：
  - launch API 暴露 summary schema 与 predicate；
  - 当前 handoff summary 可支持；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖：
  - summary schema 完整 shape；
  - valid summary 支持；
  - 错误 version、错误 apiName、缺字段、null 被拒绝；
- `verify_ini_panel_launch_api_manifest.mjs`、`verify_ini_panel_ui_shell.mjs`、
  `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 API；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface 与 browser/UI workflow 的交界。下一批建议增加一个
`createIniPanelShellSessionHandoffCompatibilityReport()` 或等价 helper，把 summary schema
支持状态、缺失字段、version/apiName mismatch 与 blocking reasons 合并成可显示报告，便于外部
shell 在 UI 中解释为什么不能消费 handoff summary；仍保持只读，不新增控制按钮，不解析 G-code。

二十七、2026-06-15 继续执行记录：INI panel shell handoff package display view-model

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow 与 SDK/API surface 的交界，
把 shell handoff package report 压缩成外部 shell 可直接渲染的 display view-model，并暴露到真实
launch browser API。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffPackageDisplayViewModel()`；
- `createIniPanelShellViewModel()` 新增 `shellSessionHandoffPackageDisplayViewModel`；
- shell view-model 暴露 `createShellSessionHandoffPackageDisplayViewModel` helper；
- `createIniPanelLaunchApiManifest().methods` 新增
  `getShellSessionHandoffPackageDisplayViewModel`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口
  `getShellSessionHandoffPackageDisplayViewModel()`；
- `ini_panel_launch_smoke.html` 校验真实 launch API 返回的 package display status 与 rows；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 shell handoff workflow 中校验 package
  display view-model 与 package report 对齐；
- `verify_ini_panel_ui_shell.mjs` 覆盖 helper 导出、shell view-model 字段和 blocked package
  mismatch display 状态；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖 package display view-model ready/blocked
  形态；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch manifest 与 launch page API 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议把 shell handoff package display view-model 接入
launch 页面当前 `[data-handoff-rows]` 渲染路径，或增加一个 package render-state helper，让 launch
页可显示 package 级 schema/report 状态；仍保持只读，不新增控制按钮，不解析 G-code。

二十八、2026-06-15 继续执行记录：INI panel shell handoff package render-state

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 shell handoff package
display view-model 压缩成 launch-side package render-state，并让真实 launch 页面首屏渲染 package
级 schema/report 状态。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffPackageRenderState()`；
- `createIniPanelShellViewModel()` 新增 `shellSessionHandoffPackageRenderState`；
- shell view-model 暴露 `createShellSessionHandoffPackageRenderState` helper；
- `createIniPanelLaunchApiManifest().methods` 新增
  `getShellSessionHandoffPackageRenderState`；
- `launch.html` 的 `[data-handoff-status]` 和 `[data-handoff-rows]` 改为从 package
  render-state 渲染；
- `launch.html` 的 `[data-handoff-shell]` 新增 `data-handoff-scope="package"`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口
  `getShellSessionHandoffPackageRenderState()`；
- `ini_panel_launch_smoke.html` 校验真实 launch API 返回的 package render-state，并校验 DOM
  已显示 package schema/report rows；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 shell handoff workflow 中校验 package
  render-state；
- `verify_ini_panel_ui_shell.mjs` 覆盖 helper 导出、shell view-model 字段和 render-state shape；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖 ready/blocked package render-state；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch manifest 与 launch page API 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow 与 OPFS/session persistence 的交界。下一批建议增加一个
`createIniPanelShellSessionHandoffPackageMountState()` 或等价 helper，把 launch-side package
render-state、target control page、required readonly methods 与首帧 control-page session readiness
合并为外部 shell 可消费的 mount-state；仍保持只读，不新增控制按钮，不解析 G-code。

二十九、2026-06-15 继续执行记录：INI panel shell handoff package mount-state

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow 与 OPFS/session persistence
的交界，新增 shell handoff package mount-state，把 launch-side package render-state、control
page target、required readonly methods 与 control-page session readiness 合并为外部 shell 可消费
状态。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffPackageMountState()`；
- `createIniPanelShellViewModel()` 新增 `shellSessionHandoffPackageMountState`；
- shell view-model 暴露 `createShellSessionHandoffPackageMountState` helper；
- `createIniPanelLaunchApiManifest().methods` 新增
  `getShellSessionHandoffPackageMountState`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.getShellSessionHandoffPackageMountState()`
  新增真实 browser 入口；
- launch API 的 mount-state 入口支持传入真实 `sessionLoadState`，从而让外部 shell 在 control
  page iframe ready 后生成 ready mount-state；
- 默认 launch mount-state 表示 `waiting-panel`，不主动打开 control page，不执行 action plan；
- `ini_panel_launch_smoke.html` 校验默认 mount-state 的 package readiness、target、readonly
  method 与 waiting session；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 control page iframe ready 后，把
  `loadControlPageSessionState()` 结果传入 launch API，并校验 ready mount-state；
- `verify_ini_panel_ui_shell.mjs` 覆盖 helper 导出、shell view-model 字段、默认 blocked mount
  state 与 ready session mount-state；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖 ready/blocked/error mount-state；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch manifest 与 launch page API 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow 与 SDK/API surface。下一批建议增加 mount-state display 或
render-state helper，把 mount-state checks 压缩为外部 shell 可直接显示的 rows，并在 shell
integration browser workflow 中校验 waiting/ready mount-state 显示；仍保持只读，不新增控制按钮，
不解析 G-code。

三十、2026-06-15 继续执行记录：INI panel shell handoff mount-state display/render-state

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow 与 SDK/API surface，新增
mount-state display view-model 与 render-state，让外部 shell 可直接显示 waiting/ready mount-state
checks。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffPackageMountDisplayViewModel()`；
- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffPackageMountRenderState()`；
- `createIniPanelShellViewModel()` 新增：
  - `shellSessionHandoffPackageMountDisplayViewModel`；
  - `shellSessionHandoffPackageMountRenderState`；
- shell view-model 暴露：
  - `createShellSessionHandoffPackageMountDisplayViewModel`；
  - `createShellSessionHandoffPackageMountRenderState`；
- `createIniPanelLaunchApiManifest().methods` 新增：
  - `getShellSessionHandoffPackageMountDisplayViewModel`；
  - `getShellSessionHandoffPackageMountRenderState`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 新增真实 browser 入口：
  - `getShellSessionHandoffPackageMountDisplayViewModel(mountState?)`；
  - `getShellSessionHandoffPackageMountRenderState(mountState?)`；
- `ini_panel_launch_smoke.html` 校验默认 waiting mount-state 的 display detail 与 render status；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 control page iframe ready 后校验 ready
  mount display/render-state；
- `verify_ini_panel_ui_shell.mjs` 覆盖 helper 导出、shell view-model 字段、waiting display/render
  state 与 ready display；
- `verify_ini_panel_shell_integration_manifest.mjs` 覆盖 waiting/ready mount render-state；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch manifest 与 launch page API 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow 与 OPFS/session persistence。下一批建议把 mount render-state 接入
launch 页面一个独立的 `[data-handoff-mount-*]` 只读区域，或在 shell integration workflow 中增加
mount-state ready DOM rendering smoke；仍保持只读，不新增控制按钮，不解析 G-code。

三十一、2026-06-15 继续执行记录：INI panel launch mount-state DOM render

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，把 mount render-state 接入
真实 launch 页面独立只读 DOM 区域，使首屏能同时显示 package handoff 状态与 mount readiness 状态。

完成内容：

- `launch.html` 新增独立只读 mount 状态区域：
  - `[data-handoff-mount]`；
  - `[data-handoff-mount-status]`；
  - `[data-handoff-mount-rows]`；
- `launch.html` 使用 `shellSessionHandoffPackageMountRenderState` 渲染默认 waiting mount-state；
- mount DOM rows 写入：
  - `data-handoff-mount-row`；
  - `data-handoff-mount-value`；
  - `data-handoff-mount-status`；
- mount DOM dataset 暴露：
  - `data-handoff-phase`；
  - `data-handoff-ready`；
  - `data-handoff-scope="mount"`；
- `ini_panel_launch_smoke.html` 校验真实 launch iframe 中的 mount DOM status、phase、ready、scope、
  session state value 与 row status；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch page 中新增 mount DOM hooks；
- `docs/panel-entry.md` 记录 launch 页面 mount DOM hook；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 browser/UI workflow。下一批建议在 shell integration browser workflow 中增加 ready
mount-state DOM rendering helper 或 smoke，把 control-page ready 后的 mount render-state 渲染到
外部 shell 自有 DOM 并校验 row/status；仍保持只读，不新增控制按钮，不解析 G-code。

三十二、2026-06-15 继续执行记录：INI panel shell integration ready mount DOM smoke

本轮按“第一原则：加快实质性推进”继续推进 browser/UI workflow，在真实 shell integration
browser workflow 中新增外部 shell 自有 DOM renderer，校验 waiting 与 ready mount-state DOM
显示。

完成内容：

- `ini_panel_shell_integration_workflow_smoke.html` 新增外部 shell 自有只读 mount 区域：
  - `[data-external-shell-mount]`；
  - `[data-external-shell-mount-status]`；
  - `[data-external-shell-mount-rows]`；
- 新增 `renderExternalShellMountState(renderState)` 测试 helper；
- workflow 初始阶段把默认 waiting mount render-state 渲染到外部 shell DOM；
- workflow 在真实 control page iframe ready 后，把 ready mount render-state 渲染到外部 shell DOM；
- browser smoke 校验 waiting DOM：
  - status 为 `Blocked: session-load-state`；
  - `data-handoff-ready="false"`；
  - `session-load-state` row status 为 `blocked`；
- browser smoke 校验 ready DOM：
  - status 为 `Ready: No blocking reasons`；
  - `data-handoff-ready="true"`；
  - `session-load-state` row value 为 `ready`；
  - `session-load-state` row status 为 `pass`；
- `docs/panel-entry.md` 记录 shell integration workflow 中外部 shell-owned DOM 渲染；
- `verify_ini_panel_entry_docs.mjs` 覆盖外部 shell mount DOM hooks 与 workflow smoke；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_entry_docs_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
ui_node_smokes=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把外部 shell mount DOM renderer 抽成可复用 helper
`renderIniPanelShellSessionHandoffMountState()` 或等价 API，并用 Node/browser smoke 保护其
DOM contract；仍保持只读，不新增控制按钮，不解析 G-code。

三十三、2026-06-15 继续执行记录：INI panel shell handoff mount DOM renderer helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，把外部
shell mount DOM renderer 从 browser smoke 内抽为可复用 helper，让 launch 页面和 shell integration
workflow 共享同一只读 DOM contract。

完成内容：

- `ui-shell.js` 新增 `renderIniPanelShellSessionHandoffMountState()`；
- `createIniPanelShellViewModel()` 暴露 `renderShellSessionHandoffMountState` helper；
- `createIniPanelLaunchApiManifest().methods` 新增 `renderShellSessionHandoffMountState`；
- `launch.html` 改为使用 `renderIniPanelShellSessionHandoffMountState()` 渲染默认 mount DOM；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.renderShellSessionHandoffMountState()`
  新增真实 browser 入口，并支持外部 shell 传入自有 DOM nodes 与 row dataset prefix；
- `ini_panel_shell_integration_workflow_smoke.html` 删除本地专用 renderer，改用 launch API 暴露的
  shared renderer 渲染 waiting/ready mount-state；
- `ini_panel_shell_integration_workflow_smoke.html` 校验 shared renderer 返回值：
  - `rendered === true`；
  - row count 为 5；
  - ready render result dataset `handoffReady === "true"`；
- `verify_ini_panel_ui_shell.mjs` 用最小 DOM stub 覆盖 shared renderer 的 dataset、statusLine、row
  ids 与 row dataset 写入；
- `verify_ini_panel_shell_integration_manifest.mjs` 将 launch method count 更新为 27；
- `verify_ini_panel_launch_api_manifest.mjs` 覆盖 launch manifest 与 launch page API 暴露；
- `verify_ini_panel_entry_docs.mjs` 与 `docs/panel-entry.md` 同步记录和校验新 helper；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 shared mount DOM renderer 增加 schema/contract helper
（例如 `createIniPanelShellSessionHandoffMountDomContract()`），让外部 shell 可在渲染前校验所需
DOM nodes、dataset keys 与 row dataset prefix；仍保持只读，不新增控制按钮，不解析 G-code。

三十四、2026-06-15 继续执行记录：INI panel shell handoff mount DOM contract helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，把 shared
mount DOM renderer 的隐式 DOM 约定抽成可复用 contract/readiness helper，让外部 shell 能在渲染前
校验所需 DOM nodes、dataset keys 与 row dataset prefix。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffMountDomContract()`；
- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffMountDomReadiness()`；
- `renderIniPanelShellSessionHandoffMountState()` 改为复用 DOM readiness gate，并支持通过 contract
  统一 selectors 与 row dataset prefix；
- `createIniPanelShellViewModel()` 暴露 `shellSessionHandoffMountDomContract`、
  `createShellSessionHandoffMountDomContract` 与 `createShellSessionHandoffMountDomReadiness`；
- `createIniPanelLaunchApiManifest().methods` 新增：
  - `getShellSessionHandoffMountDomContract`；
  - `getShellSessionHandoffMountDomReadiness`；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi` 暴露对应 browser API；
- `ini_panel_shell_integration_workflow_smoke.html` 改为先构造外部 shell-owned DOM contract，再执行
  readiness 校验，随后用同一 contract 渲染 waiting/ready mount-state；
- Node smoke 覆盖默认 contract、外部 row dataset prefix、DOM readiness ready/missing 路径、launch
  manifest 方法清单与文档记录；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议把 shell handoff mount DOM contract/readiness 聚合进一个
可复用的 browser-side mount workflow helper（例如 `mountIniPanelShellSessionHandoff()`），让外部
shell 一次调用即可完成 contract 生成、DOM readiness、mount-state render 与 structured result；仍
保持只读，不新增控制按钮，不解析 G-code。

三十五、2026-06-15 继续执行记录：INI panel shell handoff mount workflow helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，把 shell
handoff mount DOM contract/readiness/render 三步聚合为一个可复用 browser-side workflow helper，
让外部 shell 一次调用即可获得 structured mount result。

完成内容：

- `ui-shell.js` 新增 `mountIniPanelShellSessionHandoff()`；
- 新 helper 返回 `apiName`、`workflowVersion`、`phase`、`ready`、`statusLine`、`contract`、
  `domReadiness`、`renderState`、`renderResult` 与 `error`；
- DOM 未 ready 时，新 helper 返回 structured blocked result，不把 renderer error 抛给外部 shell；
- DOM ready 时，新 helper 复用 `renderIniPanelShellSessionHandoffMountState()` 并返回 renderer result；
- `createIniPanelShellViewModel()` 暴露 `mountShellSessionHandoff`；
- `createIniPanelLaunchApiManifest().methods` 新增 `mountShellSessionHandoff`，launch method count 更新为 30；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.mountShellSessionHandoff()` 暴露真实 browser API；
- `ini_panel_shell_integration_workflow_smoke.html` 改为通过 shared mount workflow 渲染 waiting/ready
  mount-state，并校验 workflow phase 与 DOM readiness；
- Node smoke 覆盖 workflow helper 的 blocked、missing DOM 与 rendered result 路径；
- 文档同步记录 browser-side mount workflow 用法；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议为 shell handoff mount workflow 增加 session-load helper 接口
（例如 `mountIniPanelShellSessionHandoffFromControlPage()`），让外部 shell 可以把 control-page API
或 session-load state 传入后一次生成 mount-state、render-state 与 DOM workflow result；仍保持只读，
不新增控制按钮，不解析 G-code。

三十六、2026-06-15 继续执行记录：INI panel shell handoff control-page mount workflow helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，为 shell
handoff mount workflow 增加 control-page/session-load 聚合 helper，让外部 shell 可以把 control-page
API 或已观察到的 session-load state 传入后，一次生成 mount-state、render-state 与 DOM workflow
result。

完成内容：

- `ui-shell.js` 新增 `mountIniPanelShellSessionHandoffFromControlPage()`；
- 新 helper 支持传入 `sessionLoadState`，也支持从 `controlPageApi.loadControlPageSessionState()`
  读取只读 session readiness；
- 新 helper 返回 `apiName`、`workflowVersion`、`phase`、`ready`、`statusLine`、
  `loadSessionStateMethod`、`sessionLoadState`、`sessionLoadError`、`mountState`、
  `mountDisplayViewModel`、`mountRenderState` 与 `mountWorkflow`；
- control-page API 缺失时返回 waiting-api 派生的 blocked workflow result；
- control-page API 抛错时把错误转换为 `createControlPageSessionLoadState({ phase: "error" })`，
  不把异常直接抛给外部 shell；
- `createIniPanelShellViewModel()` 暴露 `mountShellSessionHandoffFromControlPage`；
- `createIniPanelLaunchApiManifest().methods` 新增 `mountShellSessionHandoffFromControlPage`，
  launch method count 更新为 31；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.mountShellSessionHandoffFromControlPage()` 暴露
  真实 browser API，并默认复用 launch 侧 handoff package 与 package render-state；
- `ini_panel_shell_integration_workflow_smoke.html` 改为通过 control-page mount workflow 渲染 ready
  mount-state，并校验 session-load、mount-state 与 DOM workflow result；
- Node smoke 覆盖 session-load state 直传、control-page API 读取与缺失 API blocked 路径；
- 文档同步记录 control-page mount workflow 用法；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议增加 shell handoff readonly status 聚合 helper（例如
`readIniPanelShellSessionHandoffStatusFromControlPage()`），让外部 shell 在 mount workflow ready 后一次
读取 readonly status、校验 expected status fields，并返回 structured status result；仍保持只读，不新增
控制按钮，不解析 G-code。

三十七、2026-06-15 继续执行记录：INI panel shell handoff readonly status workflow helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，为 shell
handoff 增加 readonly status 聚合 helper，让外部 shell 在 mount workflow ready 后一次读取
control-page readonly status、校验 expected status fields，并返回 structured status result。

完成内容：

- `ui-shell.js` 新增 `readIniPanelShellSessionHandoffStatusFromControlPage()`；
- 新 helper 支持传入 `readonlyStatus`，也支持从 `controlPageApi.readControlPageStatus()` 读取只读状态；
- 新 helper 返回 `apiName`、`resultVersion`、`phase`、`ready`、`statusLine`、`readStatusMethod`、
  `expectedStatusFields`、`presentStatusFields`、`missingStatusFields`、`readonlyStatus` 与 `readError`；
- control-page API 缺失时返回 structured blocked result，不把缺失方法伪装成 pass；
- control-page API 抛错时把错误写入 `readError`，不把异常直接抛给外部 shell；
- `createIniPanelShellViewModel()` 暴露 `readShellSessionHandoffStatusFromControlPage`；
- `createIniPanelLaunchApiManifest().methods` 新增 `readShellSessionHandoffStatusFromControlPage`，
  launch method count 更新为 32；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.readShellSessionHandoffStatusFromControlPage()` 暴露
  真实 browser API，并默认复用 launch 侧 handoff summary 的 expected readonly status fields；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 browser workflow 中通过 shared status helper
  读取最终 readonly status，并校验 ready、missing fields 与 workflow last action；
- Node smoke 覆盖 readonly status 直传、control-page API 读取、缺失字段与缺失 API blocked 路径；
- 文档同步记录 readonly status workflow 用法；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议增加 shell handoff workflow result summary helper（例如
`createIniPanelShellSessionHandoffWorkflowSummary()`），把 mount workflow、control-page mount workflow
和 readonly status result 合并成一个稳定 summary，方便外部 shell 一次展示 handoff end-to-end 状态；
仍保持只读，不新增控制按钮，不解析 G-code。

三十八、2026-06-15 继续执行记录：INI panel shell handoff workflow summary helper

本轮按“第一原则：加快实质性推进”继续推进 SDK/API surface 与 browser/UI workflow，为 shell
handoff 增加 end-to-end workflow summary helper，把 mount workflow、control-page mount workflow
和 readonly status result 合并为一个稳定 summary，方便外部 shell 一次展示 handoff 总体状态。

完成内容：

- `ui-shell.js` 新增 `createIniPanelShellSessionHandoffWorkflowSummary()`；
- 新 helper 返回 `apiName`、`summaryVersion`、`phase`、`ready`、`statusLine`、`mountWorkflow`、
  `controlPageMountWorkflow`、`readonlyStatusResult`、`blockingReasons` 与 display rows；
- summary helper 对 mount workflow、control-page mount workflow、readonly status result 做只读聚合，
  并把 blocked 原因稳定编码为 end-to-end `blockingReasons`；
- `createIniPanelShellViewModel()` 暴露 `createShellSessionHandoffWorkflowSummary`；
- `createIniPanelLaunchApiManifest().methods` 新增 `getShellSessionHandoffWorkflowSummary`，
  launch method count 更新为 33；
- `launch.html` 的 `window.linuxCncIniPanelLaunchApi.getShellSessionHandoffWorkflowSummary()` 暴露
  真实 browser API，并提供无副作用的默认 summary 输入；
- `ini_panel_shell_integration_workflow_smoke.html` 在真实 browser workflow 中通过 shared summary helper
  校验 ready、blocking reasons 与 end-to-end handoff 状态；
- Node smoke 覆盖 summary helper 的 blocked/ready 路径；
- 文档同步记录 summary helper 用法；
- 未新增控制按钮；
- 未解析 G-code；
- 未解释 canonical events；
- 未新增 JS CNC 语义；
- 未改变 OPFS/session persistence、LinuxCNC interpreter、tool、parameter、planner 或
  LinuxCNC-owned runtime semantics。

验证已通过：

```bash
git diff --check
wasm-port/tests/ui/node/verify_ini_panel_ui_shell.sh
wasm-port/tests/ui/node/verify_ini_panel_launch_api_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_shell_integration_manifest.sh
wasm-port/tests/ui/node/verify_ini_panel_entry_docs.sh
wasm-port/tests/ui/node/verify_ui_node_smokes.sh
SKIP_INI_BUILD=1 SKIP_INTERP_BUILD=1 wasm-port/tests/browser/verify_ini_panel_browser.sh
wasm-port/tools/verify_vendor_sync.sh
wasm-port/tools/verify_no_standalone_cnc_semantics.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_interp_wasm.sh
SKIP_INTERP_BUILD=1 wasm-port/tests/wasm/node/verify_sim_configs_inventory_wasm.sh
wasm-port/tests/host/verify_host_smokes.sh
```

关键输出：

```text
ini_panel_ui_shell_node_smoke=ok
ini_panel_launch_api_manifest_node_smoke=ok
ini_panel_shell_integration_manifest_node_smoke=ok
ini_panel_entry_docs_node_smoke=ok
ui_node_smokes=ok
browser_ini_opfs_smoke=ok
browser_ini_control_page_smoke=ok
browser_ini_launch_smoke=ok
browser_ini_shell_integration_workflow_smoke=ok
vendor sync up to date
standalone CNC semantics guard complete
interp_wasm_node_smoke=ok
sim_configs_wasm_node_inventory_executed=28
sim_configs_wasm_node_inventory_passed=28
sim_configs_wasm_node_inventory_skipped=131
sim_configs_wasm_node_inventory_unexpected_fail=0
host_wasm_opfs_browser_smokes=ok
```

下一步建议：

继续推进 SDK/API surface。下一批建议增加 shell handoff workflow display-model helper（例如
`createIniPanelShellSessionHandoffWorkflowDisplayViewModel()`），把 end-to-end summary 转成稳定 title、
statusText、detailText 和 rows，方便外部 shell 直接渲染 handoff 总览；仍保持只读，不新增控制按钮，
不解析 G-code。
