# axis.ngc - AXIS 2.9.8 on LinuxCNC-HAL-SIM-AXIS

⌃−□×
Speed
Step 0/0 0%
Simulation loading LinuxCNC interpreter WASM Run mode Standalone Run control: standalone fallback until a machine session is loaded
Axis:
X Y Z A B C U V W
Jog:
Override Limits
Spindle:
Brake
Coolant:
Mist Flood
Spindle: off stopped S0
Coolant: mist off flood off
Machine controls: browser virtual HAL active for jog/spindle/coolant/home simulation
Feed Override:100%
Rapid Override:100%
Spindle Override:100%
Jog Speed:17 in/min
Max Velocity:240 in/min
Machine Session G-code
Use Session
Readiness: unchecked Missing: unchecked INI: - Program: - Loaded INI: - Loaded parameters: - Loaded tool table: -
Active G-Codes:
MDI Command:
G90 G17 G0 X0 Y0 Z0 G1 X1.5 Y0.75 Z0 F80 M2
LinuxCNC-backed program text
MDI History
No MDI history
Rapid Feed Arc Tool Envelope Scale View Top 100% | Pan x0.000 y0.000
X0.000 Y0.000
X:0.0000 DTG X:0.0000
Y:0.0000 DTG Y:0.0000
Z:0.0000 DTG Z:0.0000
G54 X:0.0000 G92 X:0.0000
G54 Y:0.0000 G92 Y:0.0000
G54 Z:0.0000 G92 Z:0.0000
G53
TLO X:0.0000
TLO Y:0.0000
TLO Z:0.0000
Vel:0.0000
Top 100% X0.000 Y0.000 Z0.000 - loading loading Three.js
Extents loading Full path Executed path Origin
X 0.000
Y 0.000
Z 0.000
A 0.000
B 0.000
C 0.000

X:0.000 DTG X:0.000
Y:0.000 DTG Y:0.000
Z:0.000 DTG Z:0.000
G54 X:0.000 G92 X:0.000
G54 Y:0.000 G92 Y:0.000
G54 Z:0.000 G92 Z:0.000
TLO X:0.000 Vel:0.000
TLO Y:0.000 TLO Z:0.000
Program: Executed through the LinuxCNC-backed WASM interpreter. | Source: loading Active line -
Editable G-code
loaded
Recent
No recent programs
Machine State Statement -

Motion | Line | Position | Statement
--- | --- | --- | ---

Run Status
  loading
Execution Mode
  standalone
Session INI
  -
OPFS Program
  -
Session State
  unchecked / not-loaded
Spindle
  off stopped S0
Coolant
  mist off flood off
Tool
  T0 selected 0 pocket 0 TLO z=0.000
Tool Table
  not-loaded | - | No tool table loaded
Limits/Home
  source unavailable | X home no limit off/off fault none
Overrides
  feed enabled speed enabled adaptive disabled hold enabled
Run Control
  fallback: standalone until session loaded
Preview
  zoom 100% pan x0.000 y0.000
Statement
  -

Last event pending
Last error none
Readiness unchecked
Shortcut-

T | P | Z | D | Comment
--- | --- | --- | --- | ---
No tool table loaded

Axis | Homed | Min | Max | Fault
--- | --- | --- | --- | ---
Limits/home state not available

Status History
No status history

AXIS Quick Reference
`F1` Emergency stop `F3` Manual control `F2` Turn machine on `F5` Code entry (MDI) `X/Y/Z/A` Activate axis `Ctrl-M` Clear MDI history `, / .`Select jog speed `O` Open program `I` Select jog increment `Ctrl-R` Reload program `Home` Home active axis `R` Run program `Ctrl-Home` Home all axes `T` Step program `End` Touch off active axis `P/S` Pause / Resume `F7/F8` Mist / Flood coolant `Esc` Stop running program `F9/F10` Spindle CW / CCW `V` Cycle preset views `Wheel` Zoom preview `Ctrl-K` Clear live plot
About AXIS

LinuxCNC/AXIS browser simulation, aligned to `linuxcnc/bin/axis` and `linuxcnc/share/axis/tcl/axis.tcl`.

The preview is rendered with Three.js and motion comes from the LinuxCNC interpreter WASM runtime.