Unattended Execution Timing
Between-event time is observed time with no active command; it may include model, service, transport or client waiting. Between-cycle gaps include backoff, preparation, pipeline work and restarts; do not add them again to the phase totals. Historical backoff was not instrumented.
Cycles: 20; aggregate measured time: 1766.391 s.
| Phase |
Total (s) |
Share |
Count |
Average (s) |
Maximum (s) |
| request/first-activity-wait |
523.366 |
29.63% |
4 |
130.841 |
130.849 |
| agent/post-read |
337.303 |
19.10% |
30 |
11.243 |
52.143 |
| agent/editing |
142.839 |
8.09% |
6 |
23.806 |
36.198 |
| agent/initial-decision |
120.272 |
6.81% |
7 |
17.182 |
64.937 |
| agent/decision |
114.185 |
6.46% |
14 |
8.156 |
52.563 |
| scheduler/provider-backoff |
99.942 |
5.66% |
4 |
24.986 |
39.975 |
| pre-agent-pipeline/build |
98.647 |
5.58% |
9 |
10.961 |
49.022 |
| agent/failure-recovery |
78.392 |
4.44% |
2 |
39.196 |
63.674 |
| agent/idle-stop |
74.338 |
4.21% |
2 |
37.169 |
56.383 |
| agent/post-edit |
48.387 |
2.74% |
6 |
8.065 |
13.467 |
| pre-agent-pipeline/business-acceptance |
37.213 |
2.11% |
9 |
4.135 |
8.438 |
| agent/synthesis |
36.603 |
2.07% |
7 |
5.229 |
17.848 |
| other |
14.798 |
0.84% |
8 |
1.850 |
7.380 |
| post-pipeline/capability-registry |
8.793 |
0.50% |
3 |
2.931 |
2.947 |
| preparation/continue |
8.151 |
0.46% |
19 |
0.429 |
0.693 |
| agent/finalization |
5.449 |
0.31% |
5 |
1.090 |
1.506 |
| preparation/implementationPacket |
4.587 |
0.26% |
19 |
0.241 |
0.338 |
| pre-agent-pipeline/artifact-sync |
4.177 |
0.24% |
9 |
0.464 |
2.027 |
| pre-agent-pipeline/business-audit |
3.934 |
0.22% |
9 |
0.437 |
0.449 |
| scheduler/process-start |
1.762 |
0.10% |
11 |
0.160 |
0.173 |
| source/read |
1.265 |
0.07% |
32 |
0.040 |
1.241 |
| preparation/batchPreflight |
0.842 |
0.05% |
19 |
0.044 |
0.048 |
| post-pipeline/failure-reconciliation |
0.532 |
0.03% |
1 |
0.532 |
0.532 |
| pre-agent-pipeline/preflight |
0.356 |
0.02% |
9 |
0.040 |
0.041 |
| post-pipeline/module-registry |
0.258 |
0.01% |
3 |
0.086 |
0.086 |
Wall-Clock Coverage
First cycle start to last observed event: 1795.553 s.
Inside observed cycles: 1499.791 s; between cycles: 295.762 s.
| Previous Cycle |
Next Cycle |
Gap (s) |
| 5043 |
5044 |
21.269 |
| 5044 |
5049 |
80.828 |
| 5049 |
5050 |
20.607 |
| 5050 |
5051 |
40.606 |
| 5051 |
5053 |
7.021 |
| 5053 |
5054 |
4.761 |
| 5054 |
5055 |
21.270 |
| 5055 |
5056 |
4.552 |
| 5056 |
5057 |
11.702 |
| 5057 |
5062 |
83.146 |
Cycle 5043
Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
Observed command time (union): 0.000 s; between-event time: 131.062 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.541 |
| batchPreflight |
0.043 |
| implementationPacket |
0.333 |
waitingTiming
| Step |
Seconds |
| scheduler/provider-backoff |
19.989 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.158 |
scheduler.cycle.started |
thread.started |
| 0.206 |
130.856 |
turn.started |
scheduler.cycle.completed |
Cycle 5044
Task: FW-P6-FPA-Y; batch: {'id': 'ba7f47d606c45e7f3d5a1645', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 12}.
Observed command time (union): 0.007 s; between-event time: 78.046 s; file changes: 2.
preparationTiming
| Step |
Seconds |
| continue |
0.184 |
| batchPreflight |
0.045 |
| implementationPacket |
0.338 |
postPipelineTiming
| Step |
Seconds |
| post-pipeline/module-registry |
0.086 |
| post-pipeline/capability-registry |
2.905 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
1.549 |
0.001 |
0 |
/bin/bash -lc "rg -n 'TechDraw_View|TechDraw_SectionView|TechDraw_ProjectionGroup|IMPLEMENTED_DESKTOP|dispatch|ProjectShape' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 2 |
source/read |
11.448 |
0.002 |
0 |
/bin/bash -lc "sed -n '680,840p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 3 |
source/read |
0.141 |
0.000 |
0 |
/bin/bash -lc "rg -n 'TechDraw|techdraw|projection|documentView' web/src/desktop-command-dispatcher.ts docs/current/provided-source-index.md" |
| 4 |
source/read |
12.335 |
0.001 |
0 |
/bin/bash -lc "sed -n '840,922p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 5 |
source/read |
0.141 |
0.000 |
0 |
/bin/bash -lc "sed -n '88,124p;180,252p' web/src/desktop-command-dispatcher.ts" |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.177 |
scheduler.cycle.started |
thread.started |
| 0.214 |
7.346 |
turn.started |
agent_message |
| 7.560 |
1.549 |
item.completed |
command_execution |
| 9.111 |
11.448 |
command:source/read |
command_execution |
| 20.560 |
0.141 |
command:source/read |
command_execution |
| 20.702 |
12.335 |
command:source/read |
command_execution |
| 33.039 |
0.141 |
command:source/read |
command_execution |
| 33.181 |
13.694 |
command:source/read |
agent_message |
| 46.875 |
19.287 |
item.completed |
file_change |
| 66.173 |
9.552 |
item.completed |
agent_message |
| 75.725 |
0.806 |
item.completed |
turn.completed |
| 76.530 |
1.522 |
turn.completed |
scheduler.cycle.completed |
Cycle 5045
Task: FW-P6-FPA-Y; batch: {'id': '134d419c8569a1279fca36a8', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.442 |
| batchPreflight |
0.048 |
| implementationPacket |
0.231 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5046
Task: FW-P6-FPA-Y; batch: {'id': 'd31e8c571e264673ce0e24ce', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.436 |
| batchPreflight |
0.046 |
| implementationPacket |
0.236 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5047
Task: FW-P6-FPA-Y; batch: {'id': 'f0c973d91d81e02d77383b27', 'module': 'Draft', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.432 |
| batchPreflight |
0.044 |
| implementationPacket |
0.227 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5048
Task: FW-P6-FPA-Y; batch: {'id': 'aa718a128ddc3267efe2d2ff', 'module': 'CAM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.437 |
| batchPreflight |
0.044 |
| implementationPacket |
0.211 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5049
Task: FW-P6-FPA-Y; batch: {'id': '09f6f03adaf0bcca2c61eefa', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 131.058 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.684 |
| batchPreflight |
0.043 |
| implementationPacket |
0.168 |
waitingTiming
| Step |
Seconds |
| scheduler/provider-backoff |
19.989 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.162 |
scheduler.cycle.started |
thread.started |
| 0.196 |
130.863 |
turn.started |
scheduler.cycle.completed |
Cycle 5050
Task: FW-P6-FPA-Y; batch: {'id': '09f6f03adaf0bcca2c61eefa', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 131.060 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.141 |
| batchPreflight |
0.043 |
| implementationPacket |
0.168 |
waitingTiming
| Step |
Seconds |
| scheduler/provider-backoff |
39.975 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.164 |
scheduler.cycle.started |
thread.started |
| 0.204 |
130.856 |
turn.started |
scheduler.cycle.completed |
Cycle 5051
Task: FW-P6-FPA-Y; batch: {'id': '09f6f03adaf0bcca2c61eefa', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 1.249 s; between-event time: 178.877 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.141 |
| batchPreflight |
0.044 |
| implementationPacket |
0.173 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
3.724 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,200p' docs/current/provided-source-index.md; rg -n "FreeCADWebCAMProbe|FreeCADWebCamRuntimeProbe|cam-python-family|CAM" docs/current web tools freecad-source/CMakeLists.txt freecad-source/src 2>/dev/null | head -200" |
| 2 |
source/read |
3.551 |
0.001 |
0 |
/bin/bash -lc "rg -n "CAM|cam\.python|Path" web/src docs/business-acceptance freecad-source/src/WebAssembly freecad-source/build-web -g 'CMake' -g '.ts' -g '.cpp' -g '*.json' | head -240; python3 tools/failure_reconciliation.py --help" |
| 3 |
source/read |
27.054 |
0.001 |
0 |
/bin/bash -lc "rg -n "CAM|cam\.python|Path" web/src docs/business-acceptance freecad-source/src/WebAssembly freecad-source/build-web -g '.ts' -g '.cpp' -g '*.json' -g 'CMake' | head -240" |
| 4 |
source/read |
29.173 |
1.241 |
0 |
/bin/bash -lc 'python3 tools/fast_source_search.py CAM --paths web/src docs/business-acceptance freecad-source/src/WebAssembly freecad-source/build-web | head -200' |
| 5 |
source/read |
19.992 |
0.002 |
0 |
/bin/bash -lc "python3 tools/fast_source_search.py CAM --paths web/src docs/business-acceptance freecad-source/src/WebAssembly; find web/src docs/business-acceptance freecad-source/src/WebAssembly -iname 'cam' -o -iname 'path' | head -100" |
| 6 |
other |
6.660 |
0.001 |
2 |
/bin/bash -lc "python3 tools/failure_reconciliation.py --review feb130ea304a50d6e48e 071582dc5d48c58dae62 --disposition superseded --reason '失败命令引用的 FreeCADWebCAMProbe/FreeCADWebCamRuntimeProbe 目标在当前 CAM 构建声明和现存 CAMRuntimeProbe 源码中不存在；当前业务由现存 CAMRuntimeProbe、facade、worker 与合同承载，故历史探针上下文已被替代。' --source freecad-source/src/WebAssembly/FreeCADCoreProbe/CAMRuntimeProbe.cpp web/src/cam.worker.ts docs/business-acceptance/CAM.json && python3 tools/failure_reconciliation.py --check --module CAM" |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.160 |
scheduler.cycle.started |
thread.started |
| 0.193 |
12.735 |
turn.started |
agent_message |
| 12.928 |
3.724 |
item.completed |
command_execution |
| 16.653 |
16.661 |
command:source/read |
agent_message |
| 33.314 |
3.551 |
item.completed |
command_execution |
| 36.866 |
27.054 |
command:source/read |
command_execution |
| 63.921 |
29.173 |
command:source/read |
command_execution |
| 94.335 |
19.992 |
command:source/read |
command_execution |
| 114.329 |
41.128 |
command:source/read |
agent_message |
| 155.457 |
6.660 |
item.completed |
command_execution |
| 162.118 |
18.008 |
command:other |
scheduler.cycle.completed |
Cycle 5052
Task: FW-P6-FPA-Y; batch: {'id': 'fbe99ca6f3c25b27df0502f4', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 6}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.536 |
| batchPreflight |
0.044 |
| implementationPacket |
0.261 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5053
Task: FW-P6-FPA-Y; batch: {'id': 'cfffb76f8793ba4bdb97a7c9', 'module': 'Part', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.004 s; between-event time: 180.061 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.693 |
| batchPreflight |
0.044 |
| implementationPacket |
0.169 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
6.105 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,220p' docs/current/provided-source-index.md; sed -n '300,390p' tools/failure_reconciliation.py" |
| 2 |
source/read |
0.142 |
0.000 |
0 |
/bin/bash -lc 'rg -n "4e29eab8|78fd06ffd9e08c3d9934|868203cd453d688f042f|8c5ab9cfa7592bd3388c" docs tools web || true' |
| 3 |
source/read |
0.141 |
0.000 |
0 |
/bin/bash -lc 'cat docs/business-acceptance/Part.json' |
| 4 |
source/read |
52.143 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,180p' tools/failure_reconciliation.py | rg -n "def review|runtime|build|superseded" -C 3" |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.167 |
scheduler.cycle.started |
thread.started |
| 0.197 |
64.937 |
turn.started |
agent_message |
| 65.134 |
6.105 |
item.completed |
command_execution |
| 71.240 |
0.142 |
command:source/read |
command_execution |
| 71.382 |
0.141 |
command:source/read |
command_execution |
| 71.524 |
52.143 |
command:source/read |
command_execution |
| 123.668 |
56.397 |
command:source/read |
scheduler.cycle.completed |
Cycle 5054
Task: FW-P6-FPA-Y; batch: {'id': '3ab8372d4e5563c8b7e23a41', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 131.058 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.559 |
| batchPreflight |
0.045 |
| implementationPacket |
0.314 |
waitingTiming
| Step |
Seconds |
| scheduler/provider-backoff |
19.989 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.177 |
scheduler.cycle.started |
thread.started |
| 0.212 |
130.846 |
turn.started |
scheduler.cycle.completed |
Cycle 5055
Task: FW-P6-FPA-Y; batch: {'id': '3ab8372d4e5563c8b7e23a41', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 4}.
Observed command time (union): 0.006 s; between-event time: 87.050 s; file changes: 2.
preparationTiming
| Step |
Seconds |
| continue |
0.185 |
| batchPreflight |
0.043 |
| implementationPacket |
0.323 |
postPipelineTiming
| Step |
Seconds |
| post-pipeline/module-registry |
0.086 |
| post-pipeline/capability-registry |
2.941 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
2.708 |
0.001 |
0 |
/bin/bash -lc "rg -n 'TechDraw_ActiveView|TechDraw_ArchView|TechDraw_BrokenView|TechDraw_ComplexSection|ActiveView|ArchView|BrokenView|ComplexSection' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp docs/current/provided-source-index.md web/src/desktop-command-dispatcher.ts web/src/workbench-shell.tsx" |
| 2 |
source/read |
9.527 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,160p' docs/current/provided-source-index.md" |
| 3 |
source/read |
0.142 |
0.000 |
0 |
/bin/bash -lc "sed -n '790,950p' freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp" |
| 4 |
source/read |
17.765 |
0.001 |
0 |
/bin/bash -lc "rg -n -A 22 -B 5 'void CmdTechDraw(ArchView|BrokenView|ComplexSection|ActiveView)::activated|execComplexSection\(' freecad-source/src/Mod/TechDraw/Gui/Command.cpp" |
| 5 |
source/read |
0.143 |
0.000 |
0 |
/bin/bash -lc "rg -n -A 12 -B 6 'TechDraw|nativeOperationCompleted|svg|implementation_required' web/src/desktop-command-dispatcher.ts" |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.167 |
scheduler.cycle.started |
thread.started |
| 0.199 |
8.225 |
turn.started |
agent_message |
| 8.424 |
2.708 |
item.completed |
command_execution |
| 11.134 |
9.527 |
command:source/read |
command_execution |
| 20.662 |
0.142 |
command:source/read |
command_execution |
| 20.804 |
17.765 |
command:source/read |
command_execution |
| 38.570 |
0.143 |
command:source/read |
command_execution |
| 38.714 |
15.967 |
command:source/read |
agent_message |
| 54.681 |
16.734 |
item.completed |
file_change |
| 71.449 |
13.467 |
item.completed |
agent_message |
| 84.916 |
1.284 |
item.completed |
turn.completed |
| 86.200 |
0.856 |
turn.completed |
scheduler.cycle.completed |
Cycle 5056
Task: UNATTENDED-OPTIMIZATION; batch: {'id': '3ab8372d4e5563c8b7e23a41', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 4}.
Observed command time (union): 14.186 s; between-event time: 204.931 s; file changes: 3.
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
1.379 |
0.000 |
0 |
/bin/bash -lc "sed -n '1,200p' docs/UNATTENDED_WORKFLOW.md;" |
| 2 |
source/read |
0.140 |
0.000 |
0 |
/bin/bash -lc "sed -n '1,180p' docs/current/periodic-optimization/optimization-000026-context.json" |
| 3 |
source/read |
0.139 |
0.000 |
0 |
/bin/bash -lc "sed -n '1,160p' docs/current/provided-source-index.md" |
| 4 |
source/read |
14.496 |
0.001 |
0 |
/bin/bash -lc 'python3 tools/fast_source_search.py --help' |
| 5 |
source/read |
0.140 |
0.000 |
0 |
/bin/bash -lc "sed -n '1,160p' docs/business-acceptance/TechDraw.json" |
| 6 |
source/read |
9.630 |
0.002 |
0 |
/bin/bash -lc "python3 tools/fast_source_search.py --pattern 'capture|accept\(|DrawView|Image|Scale|Width|Height' --paths freecad-source/src/Mod/TechDraw/Gui/TaskActiveView.cpp freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp web/src/workbench-shell.tsx tools/techdraw-business-cases.mjs --context 5 --max-count 90" |
| 7 |
source/read |
12.073 |
0.002 |
0 |
/bin/bash -lc "sed -n '1,260p' tools/techdraw-business-cases.mjs" |
| 8 |
source/read |
0.141 |
0.000 |
0 |
/bin/bash -lc "sed -n '280,375p' web/src/workbench-shell.tsx" |
| 9 |
source/read |
0.140 |
0.000 |
0 |
/bin/bash -lc "python3 tools/fast_source_search.py --pattern 'TechDraw_Image|imageBytes|imageWidth|imageHeight|imageData|imageBase64' --path freecad-source/src/WebAssembly/FreeCADCoreProbe/TechDrawDesktopCommands.cpp --context 65 --max-count 400" |
| 10 |
source/read |
1.635 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,270p' tools/techdraw-browser-cases.mjs" |
| 11 |
other |
0.141 |
0.000 |
0 |
/bin/bash -lc 'python3 tools/run_business_acceptance.py --help' |
| 12 |
source/read |
7.415 |
0.002 |
0 |
/bin/bash -lc "sed -n '475,570p' web/src/workbench-shell.tsx" |
| 13 |
other |
0.157 |
6.787 |
1 |
/bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:desktop:TechDraw_Image --reuse' |
| 14 |
other |
0.157 |
7.380 |
0 |
/bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:desktop:TechDraw_Image --reuse' |
| 15 |
source/read |
15.705 |
0.001 |
0 |
/bin/bash -lc 'git diff --check -- web/src/workbench-shell.tsx tools/techdraw-browser-cases.mjs docs/business-acceptance/TechDraw.json' |
| 16 |
other |
0.149 |
0.000 |
0 |
/bin/bash -lc 'python3 tools/run_business_acceptance.py --module TechDraw --ids TechDraw:desktop:TechDraw_Image --reuse' |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.164 |
scheduler.cycle.started |
thread.started |
| 0.205 |
8.304 |
turn.started |
agent_message |
| 8.509 |
1.379 |
item.completed |
command_execution |
| 9.889 |
0.140 |
command:source/read |
command_execution |
| 10.029 |
0.139 |
command:source/read |
command_execution |
| 10.169 |
14.496 |
command:source/read |
command_execution |
| 24.666 |
0.140 |
command:source/read |
command_execution |
| 24.807 |
9.630 |
command:source/read |
command_execution |
| 34.439 |
12.073 |
command:source/read |
command_execution |
| 46.514 |
0.141 |
command:source/read |
command_execution |
| 46.656 |
0.140 |
command:source/read |
command_execution |
| 46.797 |
13.423 |
command:source/read |
agent_message |
| 60.219 |
1.635 |
item.completed |
command_execution |
| 61.856 |
0.141 |
command:source/read |
command_execution |
| 61.999 |
7.415 |
command:other |
command_execution |
| 69.417 |
36.198 |
command:source/read |
file_change |
| 105.616 |
0.157 |
item.completed |
command_execution |
| 112.561 |
14.718 |
command:other |
agent_message |
| 127.279 |
8.104 |
item.completed |
file_change |
| 135.385 |
0.157 |
item.completed |
command_execution |
| 142.923 |
15.705 |
command:other |
command_execution |
| 158.630 |
0.149 |
command:source/read |
command_execution |
| 158.779 |
14.220 |
command:other |
agent_message |
| 172.999 |
31.945 |
item.completed |
file_change |
| 204.945 |
11.613 |
item.completed |
agent_message |
| 216.558 |
1.013 |
item.completed |
turn.completed |
| 217.570 |
1.547 |
turn.completed |
scheduler.cycle.completed |
Cycle 5057
Task: FW-P6-FPA-Y; batch: {'id': '3ab8372d4e5563c8b7e23a41', 'module': 'TechDraw', 'tier': 'feature-workflow', 'family': 'desktop-command-command', 'records': 4}.
Observed command time (union): 0.002 s; between-event time: 74.047 s; file changes: 2.
preparationTiming
| Step |
Seconds |
| continue |
0.183 |
| batchPreflight |
0.044 |
| implementationPacket |
0.313 |
postPipelineTiming
| Step |
Seconds |
| post-pipeline/module-registry |
0.086 |
| post-pipeline/capability-registry |
2.947 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
other |
1.399 |
0.001 |
0 |
/bin/bash -lc "awk 'NR >= 555 && NR <= 635 {print}' freecad-source/src/Mod/TechDraw/Gui/Command.cpp" |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.178 |
scheduler.cycle.started |
thread.started |
| 0.192 |
9.201 |
turn.started |
agent_message |
| 9.393 |
1.399 |
item.completed |
command_execution |
| 10.794 |
17.848 |
command:other |
agent_message |
| 28.643 |
30.571 |
item.completed |
file_change |
| 59.230 |
13.441 |
item.completed |
agent_message |
| 72.672 |
0.765 |
item.completed |
turn.completed |
| 73.437 |
0.612 |
turn.completed |
scheduler.cycle.completed |
Cycle 5058
Task: FW-P6-FPA-Y; batch: {'id': '84ecac88f95e47fc15d5fc7f', 'module': 'Part', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 8}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.536 |
| batchPreflight |
0.046 |
| implementationPacket |
0.268 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5059
Task: FW-P6-FPA-Y; batch: {'id': 'd31e8c571e264673ce0e24ce', 'module': 'TechDraw', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.445 |
| batchPreflight |
0.044 |
| implementationPacket |
0.233 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5060
Task: FW-P6-FPA-Y; batch: {'id': 'f0c973d91d81e02d77383b27', 'module': 'Draft', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 4}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.441 |
| batchPreflight |
0.044 |
| implementationPacket |
0.229 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5061
Task: FW-P6-FPA-Y; batch: {'id': 'aa718a128ddc3267efe2d2ff', 'module': 'CAM', 'tier': 'business-acceptance', 'family': 'business-acceptance', 'records': 2}.
Observed command time (union): 0.000 s; between-event time: 0.000 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.448 |
| batchPreflight |
0.043 |
| implementationPacket |
0.215 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
Cycle 5062
Task: FW-P6-FPA-Y; batch: {'id': '16ec4103ce880068ee76e716', 'module': 'CAM', 'tier': 'failure-reconciliation', 'family': 'failure-reconciliation', 'records': 4}.
Observed command time (union): 0.631 s; between-event time: 156.457 s; file changes: 0.
preparationTiming
| Step |
Seconds |
| continue |
0.687 |
| batchPreflight |
0.045 |
| implementationPacket |
0.177 |
postPipelineTiming
| Step |
Seconds |
| post-pipeline/failure-reconciliation |
0.532 |
Commands
| # |
Phase |
Wait Before (s) |
Execute (s) |
Exit |
Command |
| 1 |
source/read |
4.430 |
0.001 |
0 |
/bin/bash -lc "sed -n '1,220p' tools/failure_reconciliation.py; sed -n '1,140p' docs/current/provided-source-index.md; rg -n "CAMRuntimeProbe|cam.pythonFamilyBatch|geometry-value|native_geometry_fixture" web/src freecad-source/src/WebAssembly docs/business-acceptance tools/run_p6_cam_geometry* 2>/dev/null" |
| 2 |
other |
5.363 |
0.615 |
0 |
/bin/bash -lc 'python3 tools/failure_reconciliation.py --review 71a455566d12cf00751a 7c314934c31aa1f654ae 55331822b024b5e0e018 673c6b9cd65adc245b42 --disposition superseded --reason "历史诊断或旧 gate 已由当前 CAMRuntimeProbe、facade、worker 及业务合同替代；当前源码和业务用例提供现行证据。" --source freecad-source/src/WebAssembly/FreeCADCoreProbe/CAMRuntimeProbe.cpp' |
| 3 |
other |
52.563 |
0.014 |
1 |
/bin/bash -lc 'python3 tools/failure_reconciliation.py --check --module CAM' |
Between-Event Intervals
| Offset (s) |
Seconds |
After |
Before |
| 0.000 |
0.181 |
scheduler.cycle.started |
thread.started |
| 0.209 |
9.524 |
turn.started |
agent_message |
| 9.733 |
4.430 |
item.completed |
command_execution |
| 14.165 |
18.957 |
command:source/read |
agent_message |
| 33.122 |
5.363 |
item.completed |
command_execution |
| 39.101 |
52.563 |
command:other |
command_execution |
| 91.678 |
63.674 |
command:other |
agent_message |
| 155.352 |
0.667 |
item.completed |
turn.completed |
| 156.019 |
1.069 |
turn.completed |
scheduler.cycle.completed |
